RVR TRLS ST R TTS S ST... 3 SS RR WRLW... 3 Work low...3 SYST SRT... 6 RR WW R SYST... 6 System iagram...6 System escription...6 omponent arts Location...7 omponent escription...7 SS SYST ()... 9 T...9 T : SULT- unction ( - T)...9 RR WW R...9 RR WW R : SULT- unction ( - RR R)...10 T/RUT SS...11 RR WW R SWT...11 escription...11 omponent unction heck...11 iagnosis rocedure...11 RR WW R RLY...13 escription...13 omponent unction heck...13 iagnosis rocedure...13 omponent nspection...14 RR WW R WR SU- LY RU RUT...15 escription...15 omponent unction heck...15 iagnosis rocedure...15 omponent nspection...16 RVR S R RRR R...17 escription...17 omponent unction heck...17 iagnosis rocedure...17 omponent nspection...18 SSR S R RRR - R...19 escription...19 omponent unction heck...19 iagnosis rocedure...19 omponent nspection...20 U SS RT...21 (Y TRL UL)...21 Reference Value...21 Terminal Layout...26 hysical Values...26 ail Safe...42 T nspection riority hart...43 T ndex...44 WR R...47 RR WW R...47 Wiring iagram...47 SYT SS...56 RR WW R R RRR R T RT....56 iagnosis rocedure...56 RR WW R S T RT UT T R RRR R RT....58 iagnosis rocedure...58 T RS RRR R T RT UT RR WW - R RTS...59 Revision: anuary 2012-1 2011 axima
iagnosis rocedure... 59 RVR S R RRR R S T RT.... 60 iagnosis rocedure... 60 SSR S R RRR - R S T RT.... 61 iagnosis rocedure... 61 RR WW R SWT S T LT, UT RR WW - R RTS... 62 iagnosis rocedure... 62 RUT... 63 RUTS... 63 recaution for Supplemental Restraint System (SRS) "R " and "ST LT R-T- SR"... 63 recaution for Work... 63 RRT... 64 RRT... 64 Special Service Tool... 64 ommercial Service Tool... 64 RVL STLLT... 65 LT... 65 nspection and Repair... 65 SR... 67 Removal and nstallation... 67 Revision: anuary 2012-2 2011 axima
< S ST > SS RR WRLW S ST SS RR WRLW Work low VRLL SQU :0000000006234547 TL LW Revision: anuary 2012-3 2270 2011 axima
< S ST > 1. T RT R SYT SS RR WRLW et the detailed information from the customer about the symptom (the condition and the environment when the incident/malfunction occurred). >> T 2 2. T 1. heck T. 2. erform the following procedure if T is displayed. - Record T and freeze frame data (rint them out with SULT-.) - rase T. - Study the relationship between the cause detected by T and the symptom described by the customer. 3. heck related service bulletins for information. s any symptom described and any T detected? Symptom is described, T is displayed>> T 3 Symptom is described, T is not displayed>> T 4 Symptom is not described, T is displayed>> T 5 3. R T SYT onfirm the symptom described by the customer. onnect SULT- to the vehicle in T TR mode and check real time diagnosis results. Verify relation between the symptom and the condition when the symptom is detected. >> T 5 4. R T SYT onfirm the symptom described by the customer. onnect SULT- to the vehicle in T TR mode and check real time diagnosis results. Verify relation between the symptom and the condition when the symptom is detected. >> T 6 5. RR T RT RUR erform T onfirmation rocedure for the displayed T, and then check that T is detected again. t this time, always connect SULT- to the vehicle, and check diagnostic results in real time. f two or more Ts are detected, refer to S-64, "T nspection riority hart" and determine trouble diagnosis order. T: reeze frame data is useful if the T is not detected. erform omponent unction heck if T onfirmation rocedure is not included in Service anual. This simplified check procedure is an effective alternative though T cannot be detected during this check. f the result of omponent unction heck is, it is the same as the detection of T by T onfirmation rocedure. s T detected? YS >> T 7 >> Refer to -39, "ntermittent ncident". 6. TT LUT SYST Y SYT TL etect malfunctioning system according to -6, "System escription" based on the confirmed symptom in step 4, and determine the trouble diagnosis order based on possible causes and symptom. >> T 7 7. TT LUT RT Y ST RUR nspect according to iagnostic rocedure of the system. T: Revision: anuary 2012-4 2011 axima
< S ST > SS RR WRLW The iagnostic rocedure described is based on open circuit inspection. short circuit inspection is also required for the circuit check in the iagnostic rocedure. s malfunctioning part detected? YS >> T 8 >> heck voltage of related terminals using SULT-. 8. RR R RL T LUT RT 1. Repair or replace the malfunctioning part. 2. Reconnect parts or connectors disconnected during iagnostic rocedure again after repair and replacement. 3. heck T. f T is displayed, erase it. >> T 9 9. L When T was detected in step 2, perform T onfirmation rocedure or omponent unction heck again, and then check that the malfunction has been repaired securely. When symptom was described from the customer, refer to confirmed symptom in step 3 or 4, and check that the symptom is not detected. oes the symptom reappear? YS (T is detected)>> T 7 YS (Symptom remains)>> T 6 >> nspection nd. Revision: anuary 2012-5 2011 axima
RR WW R SYST < SYST SRT > SYST SRT RR WW R SYST System iagram :0000000006234548 System escription LL0912 :0000000006234549 peration escription When rear window defogger switch is turned while ignition switch is, the / auto amp. (rear window defogger switch) transmits rear window defogger switch signal to. turns rear window defogger relay when rear window defogger switch signal is received. Rear window defogger and door mirror defogger (with door mirror defogger) are supplied with power and operate when rear window defogger relay turns. transmits rear window defogger control signal to /R via communication when rear window defogger operates. Rear window defogger is displayed when controller (/ auto amp.) receives signals. Timer function turns rear window defogger relay for approximately 15 minutes when rear window defogger switch is turned while ignition switch is. t makes rear window defogger and door mirror defogger (with door mirror defogger) operate. Timer is canceled after pressing rear window defogger switch again during timer operation. Then turns rear window defogger relay. The same reaction also occurs during timer operation, if the ignition switch is turned. UT/UTUT SL RT Switch nput signal to function ctuator Rear window defogger switch efogger switch signal Rear window defogger and door ush button ignition switch gnition signal mirror defogger * control *: With door mirror defogger Rear window defogger oor mirror defogger * Revision: anuary 2012-6 2011 axima
< SYST SRT > omponent arts Location RR WW R SYST :0000000006234550 1. 16, 17, 18, 19 (view with instrument panel removed) 4. / auto amp. (rear window defogger switch) 37 7. Rear window defogger 54 (view with rear pillar finisher R removed) omponent escription LL0911ZZ 2. /R 17 3.. use block (/). Rear window defogger relay -2 5. oor mirror (door mirror defogger) L 4, R 107 (if equipped) 6.. Rear window defogger 53. ondenser 52 (view with rear pillar finisher L removed) :0000000006234551 Rear window defogger relay / auto amp. (rear window defogger switch) perates the rear window defogger with the operation of rear window defogger switch. erforms the timer control of rear window defogger. perates the rear window defogger and the door mirror defogger with the control signal from. The rear window defogger switch is turned. Turns the indicator lamp when detecting the operation of rear window defogger. Revision: anuary 2012-7 2011 axima
RR WW R SYST < SYST SRT > Rear window defogger oor mirror defogger * eats the heating wire with the power supply from the rear window defogger relay to prevent the rear window from fogging up. eats the heating wire with the power supply from the rear window defogger relay to prevent the door mirror from fogging up. *: With heated mirrors Revision: anuary 2012-8 2011 axima
< SYST SRT > SS SYST () T SS SYST () T : SULT- unction ( - T) LT T SULT- performs the following functions via communication with. irect iagnostic ode cu dentification Self iagnostic Result ata onitor ctive Test Work support onfiguration iag Support ntr SYST LT can perform the following functions. The part number is displayed. isplays the diagnosis results judged by. The input/output signals are displayed. escription The signals used to activate each device are forcibly supplied from. hanges the setting for each system function. nables to read and save the vehicle specification. nables to write the vehicle specification when replacing. onitors the reception status of communication viewed from. :0000000006428137 System Sub System cu dentification Self iagnostic Result irect iagnostic ode ata onitor ctive Test Work support onfiguration iag Support ntr oor lock R L Rear window defogger RR R Warning chime UZZR nterior room lamp timer T L xterior lamp L Wiper and washer WR Turn signal and hazard warning lamps LSR ntelligent ey system TLLT Y ombination switch SW mmobilizer U nterior room lamp battery saver TTRY SVR Trunk open TRU Vehicle security system TT L R system RT WR Signal buffer system SL UR TS R RSSUR TR RR WW R Revision: anuary 2012-9 2011 axima
< SYST SRT > SS SYST () RR WW R : SULT- unction ( - RR R) T TR :0000000006428163 onitor tem [Unit] US SW [n/ff] RR SW [n/ff] TV TST escription ndicates condition of push button ignition switch ndicates condition of rear window defogger switch Test tem RR R escription This test is able to check rear window defogger operation [ff/n]. Revision: anuary 2012-10 2011 axima
< T/RUT SS > RR WW R SWT T/RUT SS RR WW R SWT escription :0000000006234555 The rear window defogger is operated by turning the rear window defogger switch. Turns the indicator lamp in the rear window defogger switch when operating the rear window defogger. omponent unction heck 1. RR WW R SWT UT :0000000006234556 heck that the indicator lamp of rear window defogger illuminates with rear window defogger switch. s the inspection result normal? YS >> Rear window defogger switch function is. >> Refer to -11, "iagnosis rocedure". iagnosis rocedure :0000000008117216 Regarding Wiring iagram information, refer to -47, "Wiring iagram". 1. / UT. (RR WW R SWT) heck / auto amp. operation. s the inspection result normal? YS >> nspection nd. >> T 2 2. RR WW R SWT RQUR SL 1. Turn ignition switch. 2. heck voltage between / auto amp. harness connector 37 terminal 27 and ground. (+) / auto amp. connector Terminals Terminal ( ) 37 27 round ondition of rear window defogger switch Voltage (V) (pprox.) 0 5 s the inspection result normal? YS >> T 3 >> T 4 3. RR WW R SWT RQUR SL RUT R 1. Turn ignition switch. 2. isconnect / auto amp harness connector 37. 3. isconnect harness connector 18. 4. heck continuity between / auto amp harness connector 37 terminal 27 and harness connector 18 terminal 38. connector Terminal / auto amp. connector Terminal 18 38 37 27 Yes s the inspection result normal? YS >> Replace. Refer to S-80, "Removal and nstallation". Revision: anuary 2012-11 ontinuity 2011 axima
RR WW R SWT < T/RUT SS > >> Repair and replace harness. 4. RR WW R SWT RQUR SL RUT R SRT 1. Turn ignition switch. 2. isconnect harness connector 18. 3. isconnect / auto amp harness connector 37. 4. heck continuity between harness connector 18 terminal 38 and ground. connector Terminal ontinuity round 18 38 o s the inspection result normal? YS >> Replace / auto amp. Refer to -212, "Removal and nstallation". >> Repair or replace harness. Revision: anuary 2012-12 2011 axima
< T/RUT SS > RR WW R RLY RR WW R RLY escription ower is supplied to the rear window defogger with control. omponent unction heck :0000000006234558 :0000000006234559 1. RR WW R RLY WR SULY RUT heck that an operation noise of rear window defogger relay [located in fuse block (/)] can be heard when turning the rear window defogger switch. s the inspection result normal? YS >> Rear window defogger relay power supply circuit is. >> Refer to -13, "iagnosis rocedure". iagnosis rocedure :0000000006234560 Regarding Wiring iagram information, refer to -47, "Wiring iagram". 1. RR WW R RLY RU RUT 1. Turn ignition switch. 2. heck voltage between harness connector 18 terminal 59 and ground. (+) connector Terminals Terminal ( ) ondition of rear window defogger switch Voltage (V) (pprox.) 18 59 round 0 attery voltage s the inspection result normal? YS >> Rear window defogger relay power supply circuit is. >> T 2 2. RSS TUTY 1. Turn ignition switch. 2. isconnect and fuse block (/). 3. heck continuity between harness connector 18 () terminal 59 and fuse block (/) harness connector 4 () terminal 4Q. connector Terminal use block (/) connector Terminal ontinuity 18 () 59 4 () 4Q Yes 4. heck continuity between harness connector 18 () terminal 59 and ground. connector Terminal ontinuity round 18 () 59 o s the inspection result normal? YS >> T 3 >> Repair or replace harness. LL0175ZZ LL0916ZZ Revision: anuary 2012-13 2011 axima
RR WW R RLY < T/RUT SS > 3. RR WW R RLY heck rear window defogger relay. Refer to -14, "omponent nspection". s the inspection result normal? YS >> T 4 >> Replace rear window defogger relay. 4. TRTTT T heck intermittent incident. Refer to -39, "ntermittent ncident". s the inspection result normal? YS >> heck the following. attery power supply circuit. use block (/). >> Repair or replace the malfunctioning parts. omponent nspection :0000000006234561 1. RR WW R RLY heck rear window defogger relay. Terminal Rear window defogger relay 3 5 ondition 12V direct current supply between terminals 1 and 2. o current supply s the inspection result normal? YS >> nspection nd. >> Replace rear window defogger relay. ontinuity Yes o S497Y Revision: anuary 2012-14 2011 axima
RR WW R WR SULY RU RUT < T/RUT SS > RR WW R WR SULY RU RUT escription :0000000006234562 eats the heating wire with the power supply from the rear window defogger relay to prevent the rear window from fogging up. omponent unction heck :0000000006234563 1. RR WW R heck that the heating wire of rear window defogger is heated when turning the rear window defogger switch. s the inspection result normal? YS >> Rear window defogger is. >> Refer to -15, "iagnosis rocedure". iagnosis rocedure :0000000006234564 Regarding Wiring iagram information, refer to -47, "Wiring iagram". 1. WR SULY RUT 1. Turn ignition switch. 2. heck voltage between rear window defogger harness connector 53 terminal 1 and ground. Rear window defogger connector (+) Terminals Terminal ( ) ondition of rear window defogger switch Voltage (V) (pprox.) 53 1 round attery voltage 0 LL0177ZZ s the inspection result normal? YS >> T 2 >> T 3 2. RU RUT 1. Turn ignition switch. 2. isconnect rear window defogger. 3. heck continuity between rear window defogger harness connector 54 terminal 2 and ground. Rear window defogger connector Terminal ontinuity round 54 2 Yes s the inspection result normal? YS >> T 5 >> Repair or replace harness. 3. RSS TUTY 1 1. Turn ignition switch. Revision: anuary 2012-15 LL0178ZZ 2011 axima
RR WW R WR SULY RU RUT < T/RUT SS > 2. isconnect condenser and rear window defogger. 3. heck continuity between condenser harness connector 52 () terminal 1 and rear window defogger harness connector 53 () terminal 1. ondenser connector Terminal Rear window defogger connector Terminal ontinuity 52 () 1 53 () 1 Yes s the inspection result normal? YS >> T 4 >> Replace condenser. Refer to -67, "Removal and nstallation". 4. RSS TUTY 2 1. isconnect fuse block (/). 2. heck continuity between fuse block (/) harness connector 4 () terminal 10T, 11T and condenser harness connector 52 () terminal 1. LL0179ZZ use block (/) connector Terminal 10T 4 () 11T 52 () 1 Yes s the inspection result normal? YS >> T 6 >> Replace or repair harness. 5. LT heck filament. Refer to -16, "omponent nspection". s the inspection result normal? YS >> Refer to -39, "ntermittent ncident". >> Repair filament. Refer to -65, "nspection and Repair". 6. TRTTT T heck intermittent incident. Refer to -39, "ntermittent ncident". s the inspection result normal? YS >> heck the following. attery power supply circuit. use block (/). >> Repair or replace the malfunctioning parts. omponent nspection ondenser connector Terminal ontinuity LL0180ZZ :0000000006234565 1. LT heck the filament for damage or open circuits. Refer to -65, "nspection and Repair". s the inspection result normal? YS >> nspection nd. >> Repair filament. Refer to -65, "nspection and Repair". Revision: anuary 2012-16 2011 axima
< T/RUT SS > RVR S R RRR R RVR S R RRR R escription :0000000006234566 eats the heating wire with the power supply from the rear window defogger relay to prevent the door mirror from fogging up. omponent unction heck 1. R RRR R L :0000000006234567 heck that heating wire of door mirror defogger L is heated when turning the rear window defogger switch. s the inspection result normal? YS >> oor mirror defogger is. >> Refer to -17, "iagnosis rocedure". iagnosis rocedure :0000000006234568 Regarding Wiring iagram information, refer to -47, "Wiring iagram". 1. WR SULY RUT 1. Turn ignition switch. 2. isconnect door mirror L. 3. Turn ignition switch. 4. heck voltage between door mirror L harness connector 4 terminal 5 and ground. (+) oor mirror L connector Terminals Terminal ( ) ondition of rear window defogger switch Voltage (V) (pprox.) 4 5 round attery voltage 0 s the inspection result normal? YS >> T 2 >> Repair or replace harness. 2. RU RUT 1. Turn ignition switch. 2. heck continuity between door mirror L harness connector 4 terminal 13 and ground. LL0917ZZ oor mirror L connector Terminal ontinuity round 4 13 Yes s the inspection result normal? YS >> T 3 >> Repair or replace harness. 3. R RRR R L heck door mirror defogger L. Refer to -18, "omponent nspection". LL0918ZZ Revision: anuary 2012-17 2011 axima
RVR S R RRR R < T/RUT SS > s the inspection result normal? YS >> T 4 >> Replace door mirror. Refer to R-19, "Removal and nstallation". 4. TRTTT T heck intermittent incident. Refer to -39, "ntermittent ncident". s the inspection result normal? YS >> heck the following. attery power supply circuit. use block (/). >> Repair or replace the malfunctioning parts. omponent nspection :0000000006234569 1. R RRR R L 1. Turn ignition switch. 2. isconnect door mirror L. 3. heck continuity between door mirror terminals 5 and 13. Terminal ontinuity 5 13 Yes s the inspection result normal? YS >> nspection nd. >> Replace door mirror L. Refer to R-19, "Removal and nstallation". LL0919ZZ Revision: anuary 2012-18 2011 axima
< T/RUT SS > SSR S R RRR R SSR S R RRR R escription :0000000006234570 eats the heating wire with the power supply from the rear window defogger relay to prevent the door mirror from fogging up. omponent unction heck 1. R RRR R R :0000000006234571 heck that the heating wire of door mirror defogger R is heated when turning the rear window defogger switch. s the inspection result normal? YS >> oor mirror defogger R is. >> Refer to -19, "iagnosis rocedure". iagnosis rocedure :0000000006234572 Regarding Wiring iagram information, refer to -47, "Wiring iagram". 1. WR SULY RUT 1. Turn ignition switch. 2. isconnect door mirror R. 3. Turn ignition switch. 4. heck voltage between door mirror R harness connector 107 terminal 5 and ground. (+) oor mirror R connector Terminals Terminal ( ) ondition of rear window defogger switch Voltage (V) (pprox.) 107 5 round attery voltage 0 s the inspection result normal? YS >> T 2 >> Repair or replace harness. 2. RU RUT 1. Turn ignition switch. 2. heck continuity between door mirror R harness connector 107 terminal 13 and ground. LL0917ZZ oor mirror R connector Terminal ontinuity round 107 13 Yes s the inspection result normal? YS >> T 3 >> Repair or replace harness. 3. SSR S R RRR R heck door mirror defogger R. Refer to -20, "omponent nspection". LL0918ZZ Revision: anuary 2012-19 2011 axima
SSR S R RRR R < T/RUT SS > s the inspection result normal? YS >> T 4 >> Replace door mirror R. Refer to R-19, "Removal and nstallation". 4. TRTTT T heck intermittent incident. Refer to -39, "ntermittent ncident". s the inspection result normal? YS >> heck the following. attery power supply circuit. use block (/). >> Repair or replace the malfunctioning parts. omponent nspection :0000000006234573 1. R RRR R R 1. Turn ignition switch. 2. isconnect door mirror R. 3. heck continuity between door mirror terminals 5 and 13. Terminal ontinuity 5 13 Yes s the inspection result normal? YS >> nspection nd. >> Replace door mirror R. Refer to R-19, "Removal and nstallation". LL0919ZZ Revision: anuary 2012-20 2011 axima
< U SS RT > (Y TRL UL) U SS RT (Y TRL UL) Reference Value :0000000006423752 T: The Signal Tech Tool (-50190) can be used to perform the following functions. Refer to the Signal Tech User uide for additional information. ctivate and display TS transmitter s isplay tire pressure reported by the TS transmitter Read TS Ts Register TS transmitter s heck ntelligent ey relative signal strength onfirm vehicle ntelligent ey antenna signal strength VLUS T SS TL onitor tem ondition Value/Status R WR R WR LW R WSR SW R WR T R WR ST ther than front wiper switch ront wiper switch ther than front wiper switch L ront wiper switch L ront washer switch ront washer switch ther than front wiper switch T ront wiper switch T ront wiper is not in ST position ront wiper is in ST position T VLU Wiper intermittent dial is in a dial position 1-7 Wiper intermittent dial position TUR SL R TUR SL L TL L SW SW L SW 1 L SW 2 SS SW UT LT SW R SW R SW-R ther than turn signal switch R Turn signal switch R ther than turn signal switch L Turn signal switch L ther than lighting switch 1ST and 2 Lighting switch 1ST or 2 ther than lighting switch Lighting switch ther than lighting switch 2 Lighting switch 2 ther than lighting switch 2 Lighting switch 2 ther than lighting switch SS Lighting switch SS ther than lighting switch UT Lighting switch UT ront fog lamp switch ront fog lamp switch river door closed river door opened Revision: anuary 2012-21 2011 axima
(Y TRL UL) < U SS RT > R SW-S R SW-RR R SW-RL L L SW L UL SW Y YL L-SW Y YL U-SW ZR SW assenger door closed assenger door opened Rear door R closed Rear door R opened Rear door L closed Rear door L opened ther than power door lock switch L ower door lock switch L ther than power door lock switch UL ower door lock switch UL ther than driver door key cylinder L position river door key cylinder L position ther than driver door key cylinder UL position river door key cylinder UL position When hazard switch is not pressed When hazard switch is pressed RR SW When rear window defogger switch is pressed TR L SW TR/ SW TR/T TR R-L R-UL R-TR/ R- onitor tem ondition Value/Status R-/W R- TL SSR RQ SW -R RQ SW -S RQ SW -RL Trunk lid opener cancel switch Trunk lid opener cancel switch Trunk lid opener switch While the trunk lid opener switch is turned Trunk lid closed Trunk lid opened When L button of ntelligent ey is not pressed When L button of ntelligent ey is pressed When UL button of ntelligent ey is not pressed When UL button of ntelligent ey is pressed When TRU button of ntelligent ey is not pressed When TRU button of ntelligent ey is pressed When button of ntelligent ey is not pressed When button of ntelligent ey is pressed When UL button of ntelligent ey is not pressed and held When UL button of ntelligent ey is pressed and held When L/UL button of ntelligent ey is not pressed and held simultaneously When L/UL button of ntelligent ey is pressed and held simultaneously When outside of the vehicle is bright When outside of the vehicle is dark When front door request switch is not pressed (driver side) When front door request switch is pressed (driver side) When front door request switch is not pressed (passenger side) When front door request switch is pressed (passenger side) When rear door request switch is not pressed (driver side) When rear door request switch is pressed (driver side) lose to 5 V lose to 0 V Revision: anuary 2012-22 2011 axima
< U SS RT > (Y TRL UL) onitor tem ondition Value/Status RQ SW -RR RQ SW -/TR US SW RLY 2 -/ RLY -/ R SW 1 T/L SW ST / SW UL S -R US SW - RLY1 -/ T SW - ST - ST -T ST -T STT When rear door request switch is not pressed (passenger side) When rear door request switch is pressed (passenger side) When trunk request switch is not pressed When trunk request switch is pressed When engine switch (push switch) is not pressed When engine switch (push switch) is pressed gnition switch or gnition switch gnition switch gnition switch or When the brake pedal is not depressed When the brake pedal is depressed When selector lever is in position When selector lever is in any position other than When selector lever is in any position other than or When selector lever is in or position river door UL status river door L status When engine switch (push switch) is not pressed When engine switch (push switch) is pressed gnition switch or gnition switch When selector lever is in position When selector lever is in any position other than When selector lever is in any position other than or When selector lever is in or position When selector lever is in any position other than When selector lever is in position When selector lever is in any position other than When selector lever is in position ngine stopped ST While the engine stalls STLL t engine cranking R ngine running RU V S 1 While driving quivalent to speedometer reading V S 2 While driving quivalent to speedometer reading river door L status L R STT-R Wait with selective UL operation (5 seconds) RY river door UL status UL assenger door L status L R STT-S Wait with selective UL operation (5 seconds) RY assenger door UL status UL L gnition switch or RST gnition switch ST Revision: anuary 2012-23 2011 axima
(Y TRL UL) < U SS RT > RT STRT Y SW -SLT When the engine start is prohibited When the engine start is permitted When ntelligent ey is not inserted into key slot When ntelligent ey is inserted into key slot RST R U1 uring the operation of ntelligent ey peration frequency of ntelligent ey R LL R 4 R 3 R 2 R 1 T 4 T 3 T 2 T 1 onitor tem ondition Value/Status R RSS L R RSS R R RSS RR R RSS RL RST L1 RST R1 RST RR1 RST RL1 The key that the key slot receives does not accord with any key registered to. The key that the key slot receives accords with any key registered to. The key that the key slot receives does not accord with the fourth key registered to. The key that the key slot receives accords with the fourth key registered to. The key that the key slot receives does not accord with the third key registered to. The key that the key slot receives accords with the third key registered to. The key that the key slot receives does not accord with the second key registered to. The key that the key slot receives accords with the second key registered to. The key that the key slot receives does not accord with the first key registered to. The key that the key slot receives accords with the first key registered to. The of fourth key is not registered to The of fourth key is registered to The of third key is not registered to The of third key is registered to The of second key is not registered to The of second key is registered to The of first key is not registered to The of first key is registered to gnition switch (only when the signal from the transmitter is received) gnition switch (only when the signal from the transmitter is received) gnition switch (only when the signal from the transmitter is received) gnition switch (only when the signal from the transmitter is received) When of front L tire transmitter is registered When of front L tire transmitter is not registered When of front R tire transmitter is registered When of front R tire transmitter is not registered When of rear R tire transmitter is registered When of rear R tire transmitter is not registered When of rear L tire transmitter is registered When of rear L tire transmitter is not registered ST YT YT YT YT YT YT YT YT YT ir pressure of front L tire ir pressure of front R tire ir pressure of rear R tire ir pressure of rear L tire YT YT YT YT Revision: anuary 2012-24 2011 axima
< U SS RT > (Y TRL UL) onitor tem ondition Value/Status WR L Tire pressure indicator Tire pressure indicator UZZR Tire pressure warning alarm is not sounding Tire pressure warning alarm is sounding Revision: anuary 2012-25 2011 axima
(Y TRL UL) < U SS RT > Terminal Layout :0000000006423753 hysical Values L0127ZZ :0000000006423754 Revision: anuary 2012-26 2011 axima
< U SS RT > (Y TRL UL) Terminal o. (Wire color) (+) (-) 1 (W/) 2 (R/Y) 3 (L/W) 4 (/W) 5 () 7 (R/W) 8 (V) 9 (L) 10 () 11 (Y/R) 13 () 14 (R/ W) escription Signal name nput/ utput ondition round attery power supply nput gnition switch attery voltage round round round round attery power supply output gnition power supply output nterior room lamp power supply ront door R U- L utput gnition switch attery voltage utput gnition switch attery voltage utput utput fter passing the interior room lamp battery saver operation time ny other time after passing the interior room lamp battery saver operation time ront door R round Step lamp utput Step lamp round ll doors L utput ll doors round round ront door L U- L Rear door R and rear door L U- L utput utput ront door L Rear door R and rear door L UL (actuator is activated) ther than UL (actuator is not activated) L (actuator is activated) ther than L (actuator is not activated) UL (actuator is activated) ther than UL (actuator is not activated) UL (actuator is activated) ther than UL (actuator is not activated) attery voltage attery voltage attery voltage attery voltage attery voltage attery voltage round attery power supply nput gnition switch attery voltage round round gnition switch round ngine switch (push switch) illumination ground nput Tail lamp Value (pprox.) T: When the illumination brightening/dimming level is in the neutral position 15 (Y/L) round indicator lamp utput gnition switch or attery voltage S0010 Revision: anuary 2012-27 2011 axima
(Y TRL UL) < U SS RT > Terminal o. (Wire color) (+) (-) escription Signal name nput/ utput ondition Value (pprox.) Turn signal switch 17 (/) round Turn signal (R) utput gnition switch Turn signal switch R 6.5 V 0926 Turn signal switch 18 (/Y) round Turn signal (L) utput gnition switch Turn signal switch L 19 (Y) 21 (/) 24 (R/W) 26 (/L) round Room lamp timer control utput round ptical sensor signal nput nterior room lamp gnition switch When outside of the vehicle is bright When outside of the vehicle is dark attery voltage lose to 5V lose to round Stop lamp switch 1 nput attery voltage round Stop lamp switch 2 nput Stop lamp switch (brake pedal is released) (brake pedal is depressed) attery voltage 6.5 V 0926 27 () round ront door lock assembly L (unlock sensor) nput ront door L L status 11.8V 0011 UL status 29 (Y) round ey slot switch nput When ntelligent ey is inserted into key slot When ntelligent ey is not inserted into key slot attery voltage 31 () round Rear window defogger feedback signal nput Rear window defogger switch attery voltage Revision: anuary 2012-28 2011 axima
< U SS RT > (Y TRL UL) Terminal o. (Wire color) (+) (-) escription Signal name nput/ utput ondition Value (pprox.) 32 (R/) round ront door R switch nput ront door R switch (when front door R closes) 11.8 V 0011 (when front door R opens) 37 () round Trunk lid opener cancel switch nput Trunk lid opener cancel switch L 1.1V 0012 38 (R/ W) round Rear window defogger signal nput Rear window defogger switch 5V 40 (Y/) round ower window serial link nput/ utput gnition switch 10.2V 0013 41 (W) 42 (R) 45 () round ngine switch (push switch) illumination utput round L indicator lamp utput round Receiver & sensor ground gnition switch or ngine switch (push switch) illumination L indicator lamp 5.5V nput gnition switch attery voltage 46 (V/W) round Receiver & sensor power supply output utput gnition switch or 5. Revision: anuary 2012-29 2011 axima
(Y TRL UL) < U SS RT > Terminal o. (Wire color) (+) (-) escription Signal name nput/ utput ondition Value (pprox.) Standby state 3881 47 1 (/) round Tire pressure receiver signal nput/ utput gnition switch When receiving the signal from the transmitter 3880 48 (R/) round Selector lever transmission range switch signal nput Selector lever or position 12. xcept and positions 49 (L/) round Security indicator signal utput Security indicator linking 11.3V 0014 attery voltage ll switch Lighting switch 1ST 50 (L/ ) round ombination switch UT 5 utput ombination switch (Wiper intermittent dial 4) Lighting switch high-beam Lighting switch 2 Turn signal switch R 10.7V 0031 ll switch (Wiper intermittent dial 4) ront wiper switch (Wiper intermittent dial 4) 51 (L/W) round ombination switch UT 1 utput ombination switch ny of the conditions below with all switch Wiper intermittent dial 1 Wper intermittent dial 2 Wiper intermittent dial 3 Wiper intermittent dial 6 Wiper intermittent dial 7 10.7V 0032 Revision: anuary 2012-30 2011 axima
< U SS RT > (Y TRL UL) Terminal o. (Wire color) (+) (-) escription Signal name nput/ utput ondition Value (pprox.) ll switch (Wiper intermittent dial 4) 52 (/) round ombination switch UT 2 utput ombination switch ront washer switch (Wiper intermittent dial 4) ny of the conditions below with all switch Wiper intermittent dial 1 Wper intermittent dial 5 Wiper intermittent dial 6 ll switch 10.7V 0033 ront wiper switch T 53 (L/ R) round ombination switch UT 3 utput ombination switch (Wiper intermittent dial 4) ront wiper switch L Lighting switch UT ll switch 10.7V 0034 ront fog lamp switch 54 (/Y) round ombination switch UT 4 utput ombination switch (Wiper intermittent dial 4) Lighting switch 2 Lighting switch flash-topass 57 1 (W) round Tire pressure warning check switch Turn signal switch L nput 5V 10.7V 0035 58 (S) round ront door L switch nput ront door L switch (front door L LS) 11.8V 0011 (front door L ) 59 (/R) round Rear window defogger relay utput Rear window defogger ctive ot activated attery voltage Revision: anuary 2012-31 2011 axima
(Y TRL UL) < U SS RT > Terminal o. (Wire color) (+) (-) escription Signal name nput/ utput ondition Value (pprox.) When ntelligent ey is in the passenger compartment 0062 60 (/R) round ront console antenna 2 (-) utput gnition switch When ntelligent ey is not in the passenger compartment 0063 When ntelligent ey is in the passenger compartment 0062 61 (W/R) round enter console antenna 2 (+) utput gnition switch When ntelligent ey is not in the passenger compartment 0063 When ntelligent ey is in the antenna detection area 62 (V) round ront outside handle R antenna (-) utput When the front door R request switch is operated with ignition switch 0062 When ntelligent ey is not in the antenna detection area 0063 Revision: anuary 2012-32 2011 axima
< U SS RT > (Y TRL UL) Terminal o. (Wire color) (+) (-) escription Signal name nput/ utput ondition Value (pprox.) When ntelligent ey is in the antenna detection area 63 () round ront outside handle R antenna (+) utput When the front door R request switch is operated with ignition switch When ntelligent ey is not in the antenna detection area 0062 0063 When ntelligent ey is in the antenna detection area 64 (V) round ront outside handle L antenna (-) utput When the front door L request switch is operated with ignition switch 0062 When ntelligent ey is not in the antenna detection area 0063 When ntelligent ey is in the antenna detection area 65 () round ront outside handle L antenna (+) utput When the front door L request switch is operated with ignition switch 0062 When ntelligent ey is not in the antenna detection area 0063 Revision: anuary 2012-33 2011 axima
(Y TRL UL) < U SS RT > Terminal o. (Wire color) (+) (-) escription Signal name nput/ utput ondition Value (pprox.) 68 (/) round TS antenna amp (built in key slot) nput/ utput uring waiting gnition switch is pressed while inserting the ntelligent ey into the key slot. ust after pressing ignition switch. ointer of tester should move. 69 () round TS antenna amp (built in key slot) nput/ utput uring waiting gnition switch is pressed while inserting the ntelligent ey into the key slot. ust after pressing ignition switch. ointer of tester should move. 70 (R/) round gnition relay-2 control utput gnition switch or attery voltage uring waiting 0064 71 (L/) round Remote keyless entry receiver signal nput/ utput When operating either button on ntelligent ey 0065 ll switch (Wiper intermittent dial 4) 1.4V 0041 75 (R/Y) round ombination switch UTUT 5 nput ombination switch ront fog lamp switch (Wiper intermittent dial 4) 1.3V 0037 ny of the conditions below with all switch Wiper intermittent dial 1 Wiper intermittent dial 2 Wiper intermittent dial 6 Wiper intermittent dial 7 1.3V 0040 Revision: anuary 2012-34 2011 axima
< U SS RT > (Y TRL UL) Terminal o. (Wire color) (+) (-) escription Signal name nput/ utput ondition Value (pprox.) ll switch (Wiper intermittent dial 4) 1.4V 0041 Lighting switch high-beam (Wiper intermittent dial 4) 76 (R/) round ombination switch UTUT 3 nput ombination switch 1.3V 0036 Lighting switch 2 (Wiper intermittent dial 4) 1.3V 0037 ny of the conditions below with all switch Wiper intermittent dial 1 Wiper intermittent dial 2 Wiper intermittent dial 3 1.3V 0040 78 () 79 (L) round round -L - nput/ utput nput/ utput 80 (R/L) round ey slot illumination utput ey slot illumination linking 6.5V 0015 attery voltage 81 (L) round indicator lamp utput gnition switch or attery voltage Revision: anuary 2012-35 2011 axima
(Y TRL UL) < U SS RT > Terminal o. (Wire color) (+) (-) 83 (L) 84 (Y/R) 87 (/) round relay control utput gnition switch or attery voltage round VT shift selector utput attery voltage round escription Signal name Selector lever position switch nput/ utput nput Selector lever ondition position ny position other than (pressed) attery voltage Value (pprox.) 88 (R) round ront door R request switch nput ront door R request switch (not pressed) 1. 0016 (pressed) 89 (R) round ront door L request switch nput ront door L request switch (not pressed) 1. 0016 90 (Y) round lower fan motor relay control utput gnition switch or attery voltage 91 (L/R) round Remote keyless entry receiver power supply utput gnition switch attery voltage Revision: anuary 2012-36 2011 axima
< U SS RT > (Y TRL UL) Terminal o. (Wire color) (+) (-) escription Signal name nput/ utput ondition Value (pprox.) ll switch 1.4V 0041 Turn signal switch L 1.3V 0037 95 (R/W) round ombination switch UTUT 1 nput ombination switch (Wiper intermittent dial 4) Turn signal switch R 1.3V 0036 ront wiper switch L 1.3V 0038 ront washer switch 1.3V 0039 Revision: anuary 2012-37 2011 axima
(Y TRL UL) < U SS RT > Terminal o. (Wire color) (+) (-) escription Signal name nput/ utput ondition Value (pprox.) ll switch (Wiper intermittent dial 4) 1.4V 0041 Lighting switch UT (Wiper intermittent dial 4) 96 (/) round ombination switch UTUT 4 nput ombination switch 1.3V 0038 Lighting switch 1ST (Wiper intermittent dial 4) 1.3V 0036 ny of the conditions below with all switch Wiper intermittent dial 1 Wiper intermittent dial 5 Wiper intermittent dial 6 1.3V 0039 Revision: anuary 2012-38 2011 axima
< U SS RT > (Y TRL UL) Terminal o. (Wire color) (+) (-) escription Signal name nput/ utput ondition Value (pprox.) ll switch 1.4V 0041 Lighting switch flash-topass 1.3V 0037 97 (R/) round ombination switch UTUT 2 nput ombination switch (Wiper intermittent dial 4) Lighting switch 2 1.3V 0036 ront wiper switch T 1.3V 0038 ront wiper switch ressed 0 V 1.3V 0040 98 (/) round azard switch nput azard switch ot pressed 1.1V 0012 Revision: anuary 2012-39 2011 axima
(Y TRL UL) < U SS RT > Terminal o. (Wire color) (+) (-) 103 (V) 110 (V/W) escription Signal name nput/ utput round Trunk lid opening. utput Trunk lid round Trunk room lamp utput Trunk room lamp ondition pen (trunk lid opener actuator is activated) lose (trunk lid opener actuator is not activated) attery voltage attery voltage Value (pprox.) When ntelligent ey is in the passenger compartment 0062 114 () round Trunk room antenna 1 (-) utput gnition switch When ntelligent ey is not in the passenger compartment 0063 When ntelligent ey is in the passenger compartment 0062 115 (W) round Trunk room antenna 1 (+) utput gnition switch When ntelligent ey is not in the passenger compartment 0063 Revision: anuary 2012-40 2011 axima
< U SS RT > (Y TRL UL) Terminal o. (Wire color) (+) (-) escription Signal name nput/ utput ondition Value (pprox.) When ntelligent ey is in the antenna detection area 118 (L/) round Rear bumper antenna (-) utput When the trunk lid request switch is operated with ignition switch When ntelligent ey is not in the antenna detection area 0062 0063 When ntelligent ey is in the antenna detection area 119 (R/ W) round Rear bumper antenna (+) utput When the trunk lid request switch is operated with ignition switch 0062 When ntelligent ey is not in the antenna detection area 0063 127 (R/ W) round gnition relay ( /R) control utput gnition switch or attery voltage 130 (W) round Trunk room lamp switch nput Trunk room lamp switch (trunk is closed) 11.8V 0011 132 (R) round Starter motor relay control utput gnition switch (trunk is open) When selector lever is in or position and the brake is depressed When selector lever is in or position and the brake is not depressed attery voltage Revision: anuary 2012-41 2011 axima
(Y TRL UL) < U SS RT > Terminal o. (Wire color) (+) (-) escription Signal name nput/ utput ondition Value (pprox.) 140 (R) round ngine switch (push switch) nput ngine switch (push switch) ressed ot pressed attery voltage (pressed) 141 (R) round Trunk request switch nput Trunk request switch (not pressed) 1. 0016 144 (R) round Request switch buzzer utput Request switch buzzer Sounding ot sounding attery voltage 147 (L/R) round Trunk lid opener switch nput Trunk lid opener switch ressed ot pressed attery voltage 148 (R/W) round Rear door R switch nput Rear door R switch (when rear door R closes) 11.8V 0011 (when rear door R opens) 149 (R/) round Rear door L switch nput Rear door L switch (when rear door L closes) 11.8V 0011 (when rear door L opens) 1 : With low tire pressure monitoring system ail Safe :0000000006423756 isplay contents of SULT ail-safe ancellation 2190: TS T nhibit engine cranking rase T 2191: R Y nhibit engine cranking rase T 2192: SR - nhibit engine cranking rase T 2193: - nhibit engine cranking rase T 2195: T-S nhibit engine cranking rase T Revision: anuary 2012-42 2011 axima
< U SS RT > (Y TRL UL) isplay contents of SULT ail-safe ancellation 2560: STRTR T RLY nhibit engine cranking T nspection riority hart 500 ms after the following signal communication status has become consistent Starter control relay signal Starter relay status signal 2562: L VLT nhibit engine cranking 100 ms after the power supply voltage increases to more than 8.8 V 2608: STRTR RLY nhibit engine cranking 260: T RLY 260: STT S LST nhibit engine cranking aintains the power supply position attained at the time of T detection 2617: STRTR RLY R nhibit engine cranking 2618: nhibit engine cranking 261: STT RV nhibit engine cranking 500 ms after the following signal communication status becomes consistent Starter motor relay control signal Starter relay status signal () 500 ms after the following conditions are fulfilled relay ( /R) control signal: (attery voltage) gnition signal ( to /R): (Request signal) gnition signal ( from /R): (ondition signal) When any of the following conditions is fulfilled ower position changes to Receives engine status signal () 1 second after the starter motor relay control inside becomes normal 1 second after the ignition relay ( /R) control inside becomes normal When any of the following conditions are fulfilled ower position changes to Receives engine status signal () :0000000006423757 f some Ts are displayed at the same time, perform inspections one by one based on the following priority chart. riority 1 2562: L VLT U1000: RUT 2 U1010: TRL UT () 3 4 2190: TS T 2191: R Y 2192: SR - 2193: - 2553: T RLY 2555: ST L 2556: US-T SW 2557: VL S 2560: STRTR T RLY 2601: ST ST 2602: ST ST 2603: ST S STTUS 2604: SWT 2605: SWT 2608: STRTR RLY 260: T RLY 260: STT S LST 2614: RLY R 2615: LWR RLY R 2616: RLY R 2617: STRTR RLY R 2618: 261: US-T SW 261: STT RV 1729: VL S S RR U0415: VL S S T Revision: anuary 2012-43 2011 axima
(Y TRL UL) < U SS RT > riority 5 6 T ndex 1704: LW RSSUR L 1705: LW RSSUR R 1706: LW RSSUR RR 1707: LW RSSUR RL 1708: [ T] L 1709: [ T] R 1710: [ T] RR 1711: [ T] RL 1712: [SU RR] L 1713: [SU RR] R 1714: [SU RR] RR 1715: [SU RR] RL 1716: [RSST RR] L 1717: [RSST RR] R 1718: [RSST RR] RR 1719: [RSST RR] RL 1720: [ RR] L 1721: [ RR] R 1722: [ RR] RR 1723: [ RR] RL 1724: [TT VLT LW] L 1725: [TT VLT LW] R 1726: [TT VLT LW] RR 1727: [TT VLT LW] RL 1734: TRL UT 2622: S T 2623: S T T :0000000006423758 T: etails of time display RT: isplays when there is a malfunction now or after returning to the normal condition until turning ignition switch again. 1-39: isplayed if any previous malfunction is present when current condition is normal. t increases 1 2 3...38 39 after returning to the normal condition whenever ignition switch. The counter remains at 39 even if the number of cycles exceeds it. t is counted from 1 again when turning ignition switch after returning to the normal condition if the malfunction is detected again. o T is detected. further testing may be required. SULT display ail-safe ntelligent ey warning lamp Tire pressure monitor warning lamp Reference page U1000: RUT S-32 U1010: TRL UT () S-33 U0415: VL S S S-34 2190: TS T S-37 2191: R Y S-40 2192: SR - S-41 2193: - S-42 2553: T RLY S-46 2555: ST L S-43 2556: US-T SW S-46 2557: VL S S-48 2560: STRTR T RLY S-49 Revision: anuary 2012-44 2011 axima
< U SS RT > (Y TRL UL) SULT display ail-safe ntelligent ey warning lamp Tire pressure monitor warning lamp Reference page 2562: LW VLT S-35 2601: ST ST S-50 2602: ST ST S-53 2603: ST S STTUS S-56 2604: SWT S-59 2605: SWT S-61 2608: STRTR RLY S-63 260: T RLY S-48 260: STT S LST S-65 2614: RLY R S-50 2615: LWR RLY R S-53 2616: RLY R S-56 2617: STRTR RLY R S-67 2618: S-59 261: US-T SW S-60 2622: S T L-56 2623: S T L-59 261: STT RS S-66 1704: LW RSSUR L WT-43 1705: LW RSSUR R WT-43 1706: LW RSSUR RR WT-43 1707: LW RSSUR RL WT-43 1708: [ T] L WT-13 1709: [ T] R WT-13 1710: [ T] RR WT-13 1711: [ T] RL WT-13 1712: [SU RR] L WT-15 1713: [SU RR] R WT-15 1714: [SU RR] RR WT-15 1715: [SU RR] RL WT-15 1716: [RSST RR] L WT-17 1717: [RSST RR] R WT-17 1718: [RSST RR] RR WT-17 1719: [RSST RR] RL WT-17 1720: [ RR] L WT-15 1721: [ RR] R WT-15 1722: [ RR] RR WT-15 1723: [ RR] RL WT-15 1724: [TT VLT LW] L WT-15 1725: [TT VLT LW] R WT-15 1726: [TT VLT LW] RR WT-15 1727: [TT VLT LW] RL WT-15 Revision: anuary 2012-45 2011 axima
(Y TRL UL) < U SS RT > SULT display ail-safe ntelligent ey warning lamp Tire pressure monitor warning lamp Reference page 1729: VL S S RR WT-19 1734: TRL UT WT-20 Revision: anuary 2012-46 2011 axima
< WR R > WR R RR WW R Wiring iagram RR WW R :0000000006425583 LW0421 Revision: anuary 2012-47 2011 axima
< WR R > RR WW R LW1132 Revision: anuary 2012-48 2011 axima
< WR R > RR WW R L0612 Revision: anuary 2012-49 2011 axima
< WR R > RR WW R L1734 Revision: anuary 2012-50 2011 axima
< WR R > RR WW R L0613 Revision: anuary 2012-51 2011 axima
< WR R > RR WW R L2622 Revision: anuary 2012-52 2011 axima
< WR R > RR WW R L2623 Revision: anuary 2012-53 2011 axima
< WR R > RR WW R L2624 Revision: anuary 2012-54 2011 axima
< WR R > RR WW R L2625 Revision: anuary 2012-55 2011 axima
RR WW R R RRR R T R- T. < SYT SS > SYT SS RR WW R R RRR R T RT. iagnosis rocedure :0000000006234581 Regarding Wiring iagram information, refer to -47, "Wiring iagram". 1. RR WW R SWT heck rear window defogger switch. Refer to -11, "omponent unction heck". s the inspection result normal? YS >> T 2 >> Repair or replace the malfunctioning parts. 2. RR WW R RLY heck rear window defogger relay. Refer to -13, "omponent unction heck". s the inspection result normal? YS >> T 3 >> Repair or replace the malfunctioning parts. 3. USS heck if any of the following fuses in fuse block (/) are blown. T RTS R US. use block (/) 20 14 20 15 s the inspection result normal? YS >> T 4 >> f fuse is blown, be sure to eliminate cause of malfunction before installing new fuse. 4. RR WW R WR SULY RUT 1. Turn ignition switch. 2. heck voltage between fuse block (/) connector and ground. (+) use block (/) connector Terminals Terminal ( ) 4 10T, 11T round ondition of rear window defogger switch s the inspection result normal? YS >> T 5 >> Replace fuse block (/). 5. RR WW R WR SULY RU RUT heck rear window defogger power supply and ground circuit. Refer to -15, "omponent unction heck". s the inspection result normal? YS >> T 6 Revision: anuary 2012-56 Voltage (V) (pprox.) attery voltage 0 2011 axima
RR WW R R RRR R T R- T. < SYT SS > >> Repair or replace the malfunctioning parts. 6. R RRR R heck door mirror defogger. Refer to -59, "iagnosis rocedure". s the inspection result normal? YS >> heck intermittent incident. Refer to -39, "ntermittent ncident". >> Repair or replace the malfunctioning parts. Revision: anuary 2012-57 2011 axima
RR WW R S T RT UT T R R- RR R RT. < SYT SS > RR WW R S T RT UT T R RRR R RT. iagnosis rocedure 1. RR WW R WR SULY RU RUT heck rear window defogger power supply and ground circuit. Refer to -15, "omponent unction heck". s the inspection result normal? YS >> Refer to -39, "ntermittent ncident". >> Repair or replace the malfunctioning parts. :0000000006234582 Revision: anuary 2012-58 2011 axima
T RS RRR R T RT UT RR WW R RTS < SYT SS > T RS RRR R T RT UT RR W- W R RTS iagnosis rocedure :0000000006234583 Regarding Wiring iagram information, refer to -47, "Wiring iagram". 1. R RRR RR US heck if the following fuse in fuse block (/) is blown. T RTS R US. use block (/) 10 13 s the inspection result normal? YS >> T 3 >> T 2 2. R RRR RR WR SULY RUT R SRT 1. Turn ignition switch. 2. isconnect the following harness connectors. - use block (/) connector 5 - oor mirror L - oor mirror R 3. heck continuity between fuse block (/) harness connector 5 and ground. use block (/) connector Terminal ontinuity round 5 10 o s the inspection result normal? YS >> Replace fuse 13 (10). >> Repair or replace harness. 3. R RRR RR WR SULY RUT 1. Turn ignition switch. 2. heck voltage between fuse block (/) harness connector 5 and ground. (+) use block (/) connector Terminals Terminal ondition of rear window defogger switch s the inspection result normal? YS >> T 4 >> Replace fuse block (/). 4. R RRR R heck door mirror L. Refer to -17, "omponent unction heck". heck door mirror R. Refer to -19, "omponent unction heck". s the inspection result normal? YS >> Refer to -39, "ntermittent ncident". >> Repair or replace the malfunctioning parts. ( ) 5 10 round Revision: anuary 2012-59 Voltage (V) (pprox.) attery voltage 0 2011 axima