Classic & Exotic Service, Inc. 2032 Heide, Troy MI 48084 USA Phone: 1.248.269.9414 E-mail: Parts@classicandexotic.com WWW: http://www.classicandexotic.com Battery Bulbs CAD-0125 HIS-0051 HIS-0052 Cadillac 5/16-18 x 7/8 Sheet Metal Hex Bolt Hispano Suiza Battery Switch Brush Hispano Suiza Battery Switch Spring Hex bolt for attaching fenders and other body panels on V8 V12 V16 Cadillac and LaSalle. Used from 1927-1936. Finished in black oxide to prevent rust. Material: Steel Thread: 5/16-18 Finish: Black oxide OAL: 1.125 Length under head:.875 Thread length:.781 Hex:.500 Head:.250 Carbon brush used with the battery switch on Hispano Suiza K6 and J-12. For use with battery switch spring our part number HIS-0052. Material: Carbon copper; Height:.386; Large DIA:.543 OD x.136; Small DIA:.465 OD x.250. Battery switch spring used on Hispano Suiza K6 and J-12. For use with battery brush our part number HIS-0051. Material: Steel; Wire:.036; Free length: 1.000; OD:.479. $ 3.50 $ 38.50 $ 13.00 6.3V single contact/single filament #44 GLI-44 6V #44 Bulb bulb for dashboard lights and many other $ 2.50 6V single contact/single filament #51 bulb GLI-51 6V #51 Bulb for dashboard lights and other $ 2.50 6V single contact/single filament #55 bulb GLI-55 6V #55 Bulb for dashboard lights and other $ 3.00 7V single contact/single filament #63 bulb GLI-63 6V #63 Bulb $ 5.50 for tail lights and many other 6-8V single contact/single filament #64 GLI-64 6V #64 Bulb bulb for tail lights and many other $ 2.50 6V single contact/single filament #81 bulb GLI-81 6V #81 Bulb for dashboard lights and other $ 4.00 6V single contact/single filament #82 bulb GLI-82 6V #82 Bulb for dashboard lights and other $ 3.00 11/26/18. s subject to change. Page 1/10
6.5V single contact/single filament #209 GLI-209 6V #209 Bulb bulb for dashboard lights and many other $ 3.00 6.4V single contact/single filament #1129 GLI-1129 6V #1129 Bulb bulb for headlamps and other $ 13.50 6V dual contact #1130 bulb for GLI-1130 6v #1130 Bulb $ 5.50 headlamps and many other 6.2V single contact #1133 bulb for GLI-1133 6V #1133 Bulb $ 6.00 headlamps and many other 6V double contact/double filament #1154 GLI-1154 6V #1154 Bulb bulb for tail lights and other $ 4.00 Note: Locating pins are offset. 6V double contact/double filament #1158 GLI-1158 6V #1158 Bulb bulb for tail lights and other Note: Locating pins are on the same $ 4.00 plane. 6.1V single contact #1209 bulb for GLI-1209 6V #1209 Bulb $ 15.00 headlamps and many other Osram 7338 12 volt 45 watt bulb with 3 GLI-12V45W Osram 7338 12V Bulb $ 38.50 pin base. 6V single contact #1503 bulb for GLI-1503 6V #1503 Bulb $ 12.50 headlamps and many other 6.2V dual contact #2330 bulb for GLI-2330 6V #2330 Bulb $ 25.00 headlamps and many other 6V dual contact #2331 bulb for GLI-2331 6V #2331 Bulb $ 12.00 headlamps and many other 6V dual contact #2530 bulb for GLI-2530 6V #2530 Bulb $ 8.50 headlamps and many other 6V dual contact #2531 bulb for GLI-2531 6V #2531 Bulb $ 17.50 headlamps and many other Cable, Wiring, Conduit, Clips BUG-0016 Bugatti Type 57 Spark Plug Wire Conduit Reproduced from an original Bugatti Type 57 spark plug wire conduit. Made from rigid plastic composition material and is perfectly molded. $ 462.00 Page 2/10 11/26/18. s subject to change.
BUG-0056 CAD-0077 J-5414 J-5414-1 J-5414-1-B J-5414-1 J-6490-5 P-0099 Bugatti Type 37 & 40 Spark Plug Wire Conduit Cadillac V-8 Tail Light Conduit Bracket Bowden Cable Spring Steel Tube Clips Bowden Cable Spring Steel Tube Clips - Side Placement Duesenberg J Cowl Lamp Socket 1930-34 Packard Wiring Clip for Dash Spark plug wire conduit for use on 4 cylinder Bugatti Type 37 and Type 40. Made from rigid plastic material and perfectly molded to original specifications for an exact reproduction. Finish: Painted OAL: 12.640 OD: 1.281 ID:.912 Hole ID:.345 Hole spacing (centers): 1.43 Long space between holes (centers): 4041 Bracket for securing tail light conduit to the frame. Fits 1929 Cadillac V-8 model 353 may also fit other years and models. Cadillac part number 870795 group number 11.0390 ''Conduit for rear lamp assemblies''. Material: Brass Finish: Primer OAL: 2.350 Width: 2.325 Height:.915 ID opening bracket: 5/8 Thickness:.040 Holes:.262 Bowden cable spring steel tube clips used to secure a 3/16 tube to a line or rod. For use with Duesenberg Model J temperature gauges. Two sizes available. J-5414-1 For use on a 5/8 line or rod; Finish: Natural; Width: 1/2; Thickness:.025; Main ID:.595; Notch ID:.193. J-5414 For use on a 9/16 line or rod; Finish: Natural; Width:.480; Thickness:.025; Main ID:.545; Notch ID:.178. Bowden cable spring steel tube clips used to secure a 3/16 tube to a line or rod. Produced with alternate shape used for tube placement on the side. For use with Duesenberg Model J temperature gauges. Two sizes available. J-5414-1-B For use on a 5/8 line or rod; Finish: Natural; Width: 1/2; Thickness:.025; Main ID:.595; Notch ID:.193. J-5414-B For use on a 9/16 line or rod; Finish: Natural; Width:.454; Thickness:.025; Main ID:.545; Notch ID:.197. Cowl lamp light socket for use on Duesenberg Model J. May also fit other lights on other makes. Machined in solid brass. Material: Brass; Finish: Grey nickel; Thread: 10-32; OAL: 1.565; ID:.615; OD:.685. Outer wiring instrument board cable to dash clip for use on 1930-34 Packard Series 700-1110. This clip will work on earlier and later vehicles for cable to frame clips when bolt is needed. Packard part number 162552 ''Wiring Instrument Board Cable to Dash Clip''. Two required per car. $ 462.00 $ 55.00 $ 16.50 $ 49.50 $ 18.50 $ 12.50 STZ-0026 Stutz DV32 Spark Plug Wire Loom Stutz DV-32 spark plug wire loom casting. Fully machined. $ 632.50 11/26/18. s subject to change. Page 3/10
TAG-0051 Fiat 8V Wiring Harness Tags Laser cut aluminum wiring tag to identify wires in the wiring harness used on Fiat 8V cars. Possibly for use on other Fiats from the same early 1950's period. Many tag numbers/letters available. Limited inventory. $ 8.00 Fuse Box, Junction Box CAD-0184 Cadillac V8 V12 V16 Junction Box Knob Junction box knob for use on 1930-1931 Cadillac V-16 V-12 and V-8. $ 18.00 HIS-0095 Hispano Suiza Junction Box Electrical junction box for Hispano Suiza J-12. This two part box is made to connect four electrical lines. Uses two HIS-0095-2 to secure the box and four HIS-0095-1. Material: Bakelite; Length: 2.275; Width: 1.187; Top height:.340; Bottom height:.562; OAH:.900; Side hole ID:.295; Bottom hole ID:.167; Corner ID:.177. $ 247.50 HIS-0095-1 HIS-0095-2 HIS-0101 HIS-0125 Hispano Suiza Junction Box Square Bolt Hispano Suiza Junction Box Stud Hispano Suiza Firewall Switch Box Knob Hispano Suiza Firewall Switch Box Stud Brass M4 x.75 square head bolt. Four used per junction box on Hispano Suiza J-12. Material: Brass; Finish: Natural; Thread: M4 x.075; Thread length:.432; Head:.250; Head height:.090; OAL:.578; Length under head:.488. Brass stud used on the junction box on Hispano Suiza J-12 to connect and secure both halves of the box. Two required per box. Material: Brass; Finish: Natural; Thread: M4 x.075; Thread length:.300,.265; OAL: 1.473; Square:.250; Square length:.090. Brass knurled knob for the firewall switch box on Hispano Suiza J-12. Material: Brass; Thread: M5 x.75; Thread length: 10mm; Length: 10mm; OD: 14.5mm; Non-knurled OD: 12mm; Small OD: 9mm. Steel stud for use in the firewall switch box on Hispano Suiza J-12. Material: 12L14; Thread: M5 x 0.75; Thread length: 14mm, 10mm; Length: 57.5mm; Hex: 8mm; Hex length: 2mm; OD: 5mm. Reproduction of the SGE fuse box used on Delage, Delahaye and other French cars of the 1930's. CNC machined from $ 10.50 $ 22.00 $ 30.00 $ 41.50 MISC-0158 SGE Fuse Box Bakelite with brass studs and thumb $ 302.50 nuts. This is an excellent reproduction with correct raised lettering identifying the studs. Main fuse used in the fuse connections P-0193 1929-32 Packard Main Fuse mounted on the firewall of 1929-1932 Packard. Packard part number 166330. $ 4.00 OD:.410; Length: 1.500. Page 4/10 11/26/18. s subject to change.
Headlight, Tail Light, Spotlight, Running Light CAD-0223 COR-0034 1932 Cadillac Headlight Cork Gasket Cord 810 812 Headlight Door Adjusting Screw Cork gasket for use on 1932 Cadillac headlights. Each light requires 30'' of material - this is sold in a length of 61'' for use on two headlights. Cadillac group number 14.0352 part number 912685 ''Gasket for head lamp lens''. For Series 355BC 370BC 452BC. Material: Cork Length: 61'' Width:.287 Thickness:.152 Headlight door adjusting screw for Cord 810 812. Made from steel and cadmium plated for corrosion resistance. Material: 12L14 Finish: Cadmium Thread: 9/16-18 Thread length: 1.281 Length: 1.875 Hex:.562 Length under head: 1.625 Head height:.250 Bottom OD:.312 $ 11.00 $ 27.50 COR-0035 Cord 810 812 Tail Light Lens Spring Tail light lens spring for use on Cord 810 812. $ 16.50 COR-0036 Depress_Beam J-6460-14 Cord 810 812 Interior Trunk Light Lens Depress Beam Headlight Lens Rolls Royce Duesenberg J Headlamp Lens Retaining Wire Frosted glass inside trunk light lens for Cord 810 812. Fits inside tail lights mounted on trunk lid so running light can illuminate the inside of the trunk. Material: Glass; OD: 2.109; Thickness:.125. New Depress Beam headlight lens for Rolls Royce Phantom I and other cars. Part number 10093. Lens measures 10 49/64 x 9 31/32. Duesenberg Model J headlamp lens retaining wire. Material: Spring steel; Finish: Natural; Length: 1.262; Width:.500; Height:.234; Wire:.045; Gap:.200. $ 22.00 $ 110.00 $ 27.50 Steel lens retaining clip for tail lamps as J-6475-17 Tail Lamp Lens Clip $ 16.50 used on Duesenberg Model J and others. Dark red tinted plastic material. Duplicate J-6475-27 Pyraline Lens for Tail Lights of color used in 1930's tail lamps. Sold in $ 33.00 a standard size of 9'' x 4 1/2'' x.030 thick. J-6484 Stop Light Switch Assembly Stop light switch for all vehicles using a screw terminal type brake light switch. For use with 6 or 12 volt systems. 1/8 Pipe thread. $ 37.50 Used to adapt 1/2-20 outlet port to 1/8 pipe when installing brake light switch on J-6485 Lockheed box type master cylinders. Lockheed Brake Master Cylinder Material: Steel; Finish: Cadmium; Stop Light Switch Adapter Thread: 1/2-20; Thread length:.500; $ 15.00 Head: 3/4 Hex drilled and tapped with 1/8 pipe thread;.385 tall. 11/26/18. s subject to change. Page 5/10
J-6490-8 Duesenberg J Cowl Lamp Retaining Wire Assembly Spring steel retaining wire for the cowl lamp lens and reflector on Duesenberg Model J. Material: Spring steel; Finish: Natural; Wire:.063; OD: 5.718; Flat length: 1.390. Bullet wire terminal to plug into the steering column mounted headlight switches. Used by Cadillac, LaSalle, $ 38.50 J-6570 Headlight Switch Wire Terminal Duesenberg and others. Cadillac part $ 8.00 number 1835964, group number 7.5510. Material: Brass; OAL: 3/4; ID: 1/8; Hole ID:.219. J-6574 Headlight Switch Terminal Plate Fibre glass plate with phosphor bronze blade spring. Fits under the headlight switch cover and holds the terminal ends into the switch sockets. Used on headlight switches on Duesenberg as well as Cadillac and LaSalle from 1927-1931. Measures 1/16 thick; plate is 2 1/16 OD; spring is 2 1/4 OD. $ 93.50 MISC-0391 P-0027 P-0182 STW-0023-3 Scintilla Ignition & Lighting Switch Red Insert Packard Reverse Light Switch Support Plate Packard Headlight Reflector Screw Stewart Warner Spotlight Faceted Nut Red plastic insert for use in Scintilla ignition and lighting switches on 1930's Bugatti. OD:.890; ID:.380; Mounting holes:.070; Thickness:.062. Reverse light switch contact support plate for Packard V-12 8. Made from Micarta and slotted to attach original switch contact blades. Measures.700 Dia.;.549 across flats;.102 thick. Brass 6-32 screw for headlight reflectors on 1930-1932 Packard. Packard part number 176975. Six required per car. Material: Brass; Finish: Natural; Thread: 6-32; Thread length:.241; OAL:.535; Length under head:.475; Head OD:.240; Head height:.060. Brass faceted nut securing the spotlight assembly to the support arm on Stewart Warner windshield mounted spotlight / rear view mirrors. For use on Duesenberg Model A and possibly other cars of the era. Material: Brass; Finish: Natural; Thread: 1/4-24; Thread depth:.393; Hex:.750; Hex height:.240; OAH:.481; Step ID:.531. $ 137.50 $ 25.00 $ 18.00 $ 55.00 TUC-0014 Tucker Front Running Light Lens Right Tucker right side front running light lens. Made from cast clear plastic. $ 181.50 TUC-0015 Tucker Front Running Light Lens Left Tucker left side front running light lens. Made from cast clear plastic. $ 181.50 Page 6/10 11/26/18. s subject to change.
Spark Plug Hardware AUB-0009 AUB-0010 AUB-0011 AUB-0012 AUB-0013 AUB-0014 AUB-0015 Auburn 8-125 Spark Plug Wire Loom Front Lower Auburn 8-125 Spark Plug Wire Loom Front Upper Auburn 8-125 Spark Plug Wire Loom Rear Lower Auburn 8-125 Spark Plug Wire Loom Rear Upper Auburn 8-90 Spark Plug Wire Loom Front Lower Auburn 8-90 Spark Plug Wire Loom Front Upper Auburn 8-90 Spark Plug Wire Loom Rear Lower Front lower spark plug wire loom for use on Auburn 8-125.; Part of a four piece spark plug wire loom used on the car. Auburn part number I5-71. Material: Aluminum Finish: Natural Length: 14.25 Width:.492 to 3.250 Height:.464 Thickness:.038 Large holes ID:.625 Small holes ID:.343 Front upper spark plug wire loom for use on Auburn 8-125.; Part of a four piece spark plug wire loom for use on the car. Should be plated prior to installation. Auburn part number I5-73. Material: Steel Finish: Unplated Length: 15.25 Width:.650 to 3.450 Height:.520 Thickness:;.044 Holes ID:.343 Rear lower spark plug wire loom as used on Auburn 8-125.; Part of a four piece spark plug wire loom set used on the car. Auburn part number I5-74. Material: Aluminum Finish: Natural Length: 14.700 Width:.750 to 3.232 Height:.464 Thickness:.038 Large holes ID:.625 Small holes ID:.375 Rear upper spark plug wire loom for use on Auburn 8-125.; Part of a four piece spark plug wire loom used on the car. Should be plated prior to installation. Auburn part number I5-75. Material: Steel Finish: Unplated Length: 14.75 Width:.915 to 3.415 Height:.568 Thickness:.044 Holes ID:.343 Front lower spark plug wire loom for use on Auburn 8-90. Part of a four piece spark plug wire loom used on the car. Auburn part number I5-76. Material: Aluminum Finish: Natural Length: 13.6 Width:.761 to 3.070 Height:.484 Thickness:.038 Large holes ID:.625 Small holes ID:.375 Front upper spark plug wire loom for use on Auburn 8-90.; Part of a four piece spark plug wire loom used on the car. Should be plated prior to installation. Auburn part number I5-77. Material: Steel Finish: Unplated Length: 13.900 Width:.850 to 3.234 Height:.600 Thickness:.044 Holes ID:.400 Rear lower spark plug wire loom for use on Auburn 8-90.; Part of a four piece spark plug wire loom used on the car. Auburn part number I5-72. Material: Aluminum Finish: Natural Length:; 13.00 Width:.791 to 3.207 Height:.531 Thickness:;.038 Large holes ID:.625 Small holes ID:.375 11/26/18. s subject to change. Page 7/10
AUB-0016 AUB-0018 BUG-0016 BUG-0056 HIS-0012 HIS-0071 HIS-0072 Auburn 8-90 Spark Plug Wire Loom Rear Upper Auburn 8-90 Spark Plug Wire Housing Stud Bugatti Type 57 Spark Plug Wire Conduit Bugatti Type 37 & 40 Spark Plug Wire Conduit Hispano Suiza Spark Plug Wire End Hispano Suiza Spark Plug Wire End Clip Hispano Suiza Spark Plug Wire End Clip Spring Rear upper spark plug wire loom for use on Auburn 8-90.; Part of a four piece spark plug wire loom used on the car. Should be plated prior to installation. Auburn part number I5-78. Material: Steel Finish: Unplated Length: 14.700 Width: 1.072 to 3.472 Height:.565 Thickness:;.044 Holes ID:.343 5/16-18 stud for spark plug wire housing on Auburn 8-90. This item is made to order and has a production time of approximately seven days. Auburn part number K5-61. Material: Steel Finish: Natural Thread: 5/16-18 OAL: 7.3125 Shorter thread length: 1.025 Longer thread length: 1.5625 Middle length: 4.725 Reproduced from an original Bugatti Type 57 spark plug wire conduit. Made from rigid plastic composition material and is perfectly molded. Spark plug wire conduit for use on 4 cylinder Bugatti Type 37 and Type 40. Made from rigid plastic material and perfectly molded to original specifications for an exact reproduction. Finish: Painted OAL: 12.640 OD: 1.281 ID:.912 Hole ID:.345 Hole spacing (centers): 1.43 Long space between holes (centers): 4041 Black bakelite spark plug wire end insulator as used on Hispano Suiza K6 and J12. May also be compatible with other European cars of the era. Material: Bakelite; Finish: Polished; Head height:.300; Head OD:.600; Body OD:.485; Body ID:.343; Head ID:.280; OAL: 1.452. Steel clip used with the spark plug wire end clip spring and insulator on Hispano Suiza J12 K6. Used to secure the spark plug wire. Material: Steel, brass; Finish: Natural; OAL: 1.220; OAW:.492; ID of gap when closed:.170; Thickness of arm:.035. Steel spring used with the spark plug wire end clip on Hispano Suiza J12 and K6. Material: Steel; Finish: Natura;l Wire:.027; OD:.340; ID:.286; Free length:.588. $ 27.50 $ 462.00 $ 462.00 $ 38.50 $ 16.50 $ 5.50 90' Spark plug wire end with ribbed black MISC-0004 Rajah 90' Spark Plug Wire End screw on cover and nickel plated brass $ 6.50 wire end. Page 8/10 11/26/18. s subject to change.
MISC-0306 Spark Plug Rack, 18mm Plugs 18mm Spark plug rack to store six spare plugs. Designed to be fastened to the firewall for convenient extra storage. Perfect for use on any car with 18mm spark plugs. Material: Aluminum; Thread: M18 x 1.50; Length: 197mm; Width: 32mm; Thickness: 19mm; Mounting holes: 5.5mm; 135.5mm centers. $ 110.00 P-0220 1912 Packard Spark Plug Extension Spark plug extension for use on 1912 Packard and other prewar automobiles. Material: Brass; Finish: Natural; Thread: M4 x.7 x.625 long; Hex: 5/16; Hex length: 1.125; OAL: 1.525; Plug fitting length:.400. $ 22.00 STZ-0026 Stutz DV32 Spark Plug Wire Loom Stutz DV-32 spark plug wire loom casting. Fully machined. $ 632.50 11/26/18. s subject to change. Page 9/10
Terms and Conditions Returns Items must be returned in new unused condition within 14 days of receipt. Items returned after 14 days of receipt are subject to a 15% restocking fee. No returns will be accepted after 90 days from the original purchase date. Original shipping charges are non-refundable. Refunds will be issued upon receipt and inspection of the returned item and will be issued in the manner payment was received. For returns made after 60 days, refunds will be issued by check only. Items which are cut to order and sold by the foot and items made to customer specified lengths or widths are not returnable. When returning an item, please include a copy of your original invoice and send the item to: Classic & Exotic Service, Inc. Attn: Returns 2032 Heide (USPS only) 2000 Heide (UPS, FedEx only) Troy, MI 48084 USA All returns must be mailed - we cannot accommodate in-person returns. Delivery We ship worldwide Monday through Friday. Our normal handling time is 24 hours or less - many orders ship the same day they are placed. Some items may require an additional handling time - see individual product descriptions for information. Expedited domestic shipping is through UPS. For expedited UPS shipping, orders must be received by 1PM EST. Orders received after 1PM EST will ship the next business day. UPS business days are Monday - Friday. Next Day Air orders placed on Friday will be delivered on Monday. In some instances, non-expedited domestic orders may be shipped by USPS Priority Mail at our discretion. If your order must be shipped by UPS Ground, please note that when placing your order. International shipping is through USPS Express Mail or UPS Worldwide services. We do not ship by Fedex - that includes domestic and international orders. Shipping cost is determined by package weight and shipment destination. Shipping cost for your order can be viewed in your shopping cart by entering a shipment destination.