STATE OF MINNESOTA PRICING PAGE Service Bodies Contract end Date 10-31-17 Vendor Name: United Truck Co., Inc. Contact Person: Heidi Herstad Street Address: 5219 Miller Trunk Hwy P.O. Box: City, State, Zip Hermantown MN 55811 Phone #: 218-729-6000 Toll Free #: 800-232-0719 Fax #: 218-729-6001 Email Address: heidi@unitedtruckbody.com Version of Excel used: Furnish separate price quote for: BODY COMPONENTS AND ATTACHMENTS FOR 6,000 1.0 UTILITY /SERVICE BODY Make Warranty Date & I.D. of Price List Knapheide models 6 years Discount to be applied to Price List* (see note below) 0.00% Installation of Utility/Service as per MnDOT spec 1.0 See attached price schedule Price of FMVSS 108 lighting package See attached price schedule Price of ICC bumper under ride protection See attached price schedule Installation of ICC bumper under the protection See attached price schedule 5-Oct-16 Delivery SEE SPECIAL TERMS AND CONDITIONS - NO FLAT RATE ALLOWED Delivery Starting Point Address Hermantown MN 55811 Price per loaded mile for delivery $2.00 Shop Rate per Hour Shop Rate for Mechanical work $90.00 Shop Rate $90.00 *Note: The "Discount to be Applied to Price List" must be a numberic percentage. Not listing a numberic percentage may result in your bid being rejected.
KNAPHEIDE 1.0 KSS SERVICE BODIES Item # Model CA Length (Nominal) Height STATE OF MINNESOTA 10/5/2016 Event ID G0210-2000005958 Dimensions Compartment Depth Floor Fuel Fill Location Supplied Standard Net Weight (Lbs) UTB Uninstalled Price 1.1 K56S-F $6,950.00 1176 1.2 K56S-GMD 56" $6,950.00 105" FRONT 1.3 K56SF-F SRW $7,632.00 79.2" 15" 49" 1309 1.4 K56SF-GMD $7,632.00 1.5 K60S-F 60" 1248 $7,269.00 40.2" 1.6 K60SF-F SRW REAR 1394 $8,375.00 1.7 K60D-F $7,522.00 114.5" 1415 1.8 K60D-GMD 60" DUAL $8,268.75 95.2" 20.5" 54" 1.9 K60DF-F DRW REAR $9,247.00 1561 1.10 K60DF-GMD DUAL $9,247.00 NOTE: KSS Service Bodies are not designed for medium duty chassis aplications. Not compatible with tires larger than 34" in diameter. Labor To Install On 2003 & later 56" CA Dodge, the KSS models with the "-F" suffix may be used if the round fender cutout is desired to better match the Dodge front fender cutout. On 2007 & later Dodge 60" CA chassis, the "-F" models are recommended, because they have the standard rear full filler for the standard rear tank used on these Dodge chassis. Units are assembled & have prime paint exterior. Interior is painted with light gray finish that reflects light. Note: Bumpers optional and not included in above price. See option section for bumper availability. See Option section for other fuel fill location options. Prices include the following standard One (1) tailgate installed. One (1) mounting kit, Knapheide's Quick Mount brackets designed to comply with FMVSS-301 requirements. Stop, turn, tail, clearance lights (where applicable) and wire harness are factory installed in body.
License light and RIB lights (where applicable) included in bumper mounting kit for installation in bumper (optional). Two (2) adjustable divider shelves & dividers, street & curb side front vertical compartment. Two (2) adjustable divider shelves & dividers, second front vertical compantment on 84" CA bodies. One (1) adjustable divider shelf & dividers, street & curb side rear vertical comopartment. One (1) adjustable divider shelf & dividers, curb side horizontal comopartment. The standard mounting kits do not include the follow: frame adapter required for Dodge 56"& 60" CA. FUEL FILLER KITS 1.15 Aluminum Fuel Fill Cup 1.16 GM Fuel Kit For Pickup Box Removal 56" CA $495.00 1.17 GM Fuel Kit 60" & 84" CA Chassis $75.00 1.18 Ford Fuel Fill Kit For Pickup Box Removal 56" CA REAR BUMPERS 1.19 78" Galva-Grip Rear Bumper KSS - Ball Mount $425.00 1.20 78" Galva-Grip Rear Bumper KSS - Recess Mount 1.21 94" Galva-Grip Rear Bumper KSS - Ball Mount $550.00 1.22 94" Galva-Grip Rear Bumper KSS - Recess Mount $450.00 PAINT OPTIONS Paint White Single Stage - $850.00 Add 1.23 Paint Color Other Than White Single Stage One Color - Add $1,250.00 1.24 Paint Base Coat/Clearcoat - Add $1,500.00 1.25 1.26 Line-X Cargo Liner In Cargo Bed 96" Bodies $825.00 1.27 108" Bodies $950.00 HITCH OPTIONS 1.28 26102533 Receiver Hitch Class IV w/ 2½" Receiver - Loose $235.00 1.29 12305678 Adapter - Recuce 2.5" Receiver to $49.00 1.30 Combination Ball/Pintle Hook - 8 Ton Capacity -2-5/16" Ball $135.00 1.31 Pintle Hook Adapter To Slide Into Receiver Hitch 1.32 PH20 Pintle Hook $89.00 1.33 Drawtite 5500 Brake Controller - $110.00 United Truck Co., Inc. 5219 Miller Trunk Hwy Hermantown, MN 55811 Email: heidi@unitedtruckbody.com Phone: 218-729-6000 Toll Free: 800-232-0719 Fax: 218-729-6001
STATE OF MINNSOTA 10/5/2016 Event ID G0210-2000005958 KNAPHEI DE 1.0 STANDAR D SERVICE BODIES Item # Dimension Mounting Net UTB Model 600 Compartment Furnished Install Kit Labor to Floor Weight Uninstalled Series Lengt Height (Lbs) Price h Depth Standard Cost 1.34 696J 40" 1111 $3,744.00 $1,065.00 $2,360.00 1.35 696LPJ 96" 36" 26102434 1060 $4,640.00 $1,065.00 $2,330.00 1.36 696FJ 37 ¼" 1183 $4,477.00 $1,065.00 $2,911.00 78" 14 ½" 1.37 6108J 40" 1238 $4,430.00 $1,065.00 $2,641.00 49" 1.38 6108LPJ 36" 1176 $4,998.00 $1,065.00 $2,631.00 1.39 6108FJ 37¼" 1311 $4,189.00 $1,065.00 $3,276.00 1.40 6108DJ 108" 40" 1366 $4,572.00 $1,065.00 $2,947.00 89" 1.41 6108DFJ 37¼" 26102442 1438 $5,438.00 $1,065.00 $3,010.00 1.42 6108D54J 40" 1399 $4,720.00 $1,065.00 $3,490.00 1.43 6108D54FJ 37¼" 20" 1471 $5,570.00 $1,065.00 $3,966.00 1.44 6132D54J 40" 94" 54" 1704 $6,480.00 $1,065.00 $3,966.00 132" 1.45 6132D54FJ 37¼" 1791 $7,474.00 $1,065.00 $4,875.00 1.46 6132D54FJ40 132" 40" 26102459 1979 $7,665.00 $1,065.00 $5,980.00 108" bodies on 56" CA chassis applications are not available. Units are assembled and have prime paint exterior. The standard mounting kits do not include the following: Frame adapters required for Dodge 56" CA. Note: Use Standard 'J' Service bodies in medium duty application may require modification for tire clearance. Prices include the following standard features: Two (2) adjustable divider shelves & dividers, street & curb side front vertical comp. (1st & 2nd vertical 132" bodies only) One (1) adjustable divider shelf & dividers, street & curb side second front vertical comp. (157" body only) One (1) adjustable divider shelf & dividers, street & curb side full height rear vertical compartment) One (1) adjustable divider shelf & dividers, curb side horizontal compartment) One (1) mounting kit, Knapheide's Quick Mount brackets and hardware, designed to comply. One (1) set rear mudflaps The standard mounting kits do no include the following: Frame adapters required for Dodge 60" / 84" CA. Frame extensions required for (1997 & prior) Ford 60" CA. Flip-top models with short lid for use with rear mounted crane Cost = Standard Flip-top models *Note: 132" long bodies with standard bumper do not fit 2003 & later GM C45/5500 84" CA chassis cabs with 40 gallon or greater single rear tanks. Bodies require dual 40 gallon (25 front/15 rear), 25 gallon front tank only or 32 gallon rear. LIGHT KITS 1.47 Standard Flush Mount Light Kit 78" - Ford Plug $165.00
1.48 Standard Flush Mount Light Kit 94" - Ford Plug $225.00 1.49 Standard Flush Mount Light Kit 78" - GM 3 Light $210.00 1.50 Standard Flush Mount Light Kit 94" - GM 3 Light 1.51 LED Flush Mount Light Kit 78" - Ford Plug $190.00 1.52 LED Flush Mount Light Kit 94" - Ford Plug 1.53 LED Flush Mount Light Kit 78" - GM 3 Light FUEL FILLER KITS 1.54 Aluminum Fuel Fill Cup 1.55 GM Fuel Kit For Pickup Box Removal 56" CA $495.00 1.56 GM Fuel Kit 60" & 84" CA Chassis $75.00 1.57 Ford Fuel Fill Kit For Pickup Box Removal 56" CA REAR BUMPERS INSTALLED 1.58 78" Galva-Grip or Treadplate Rear Bumper $325.00 1.59 78" Galva-Grip or Treadplate Rear Bumper - Recessed 1.60 78" Galva-Grip or Treadplate Rear Bumper - Ball Mount $395.00 1.61 94" Galva-Grip or Treadplate Rear Bumper $365.00 1.62 94" Galva-Grip or Treadplate Rear Bumper - Recessed $425.00 1.63 94" Galva-Grip or Treadplate Rear Bumper - Ball Mount $485.00 PAINT OPTIONS 1.64 Paint White Single Stage - Add $850.00 1.65 Paint Color Other Than White Single Stage One Color - Add $1,250.00 1.66 Paint Base Coat/Clearcoat - Add $1,500.00 1.67 1.68 Line-X Cargo Liner In Cargo Bed Area: 96" Bodies $825.00 1.69 108" Bodies $950.00 1.70 132" Bodies $995.00 1.71 132" FJ Bodies $1,195.00 X HITCH OPTIONS INSTALLED 1.72 26102533 Receiver Hitch Class IV w/ 2½" Receiver 1.73 12305678 Adapter - Recuce 2.5" Receiver to 2" $49.00 1.74 Combination Ball/Pintle Hook - 8 Ton Capacity -2-5/16" Ball $135.00 1.75 Pintle Hook Adapter To Slide Into Receiver Hitch 1.76 PH20 Pintle Hook $89.00 1.77 Drawtite 5500 Brake Controller United Truck Co., Inc. 5219 Miller Trunk Hwy Email: heidi@unitedtruckbody.com Hermantown, MN 55811 Phone: 218-729-6000 Toll Free: 800-232-0719 Fax: 218-729-6001