Applications For use in hazardous locations such as plants where plastics, paints, thinners and petrochemicals are manufactured. For use in chemical and petrochemical plants, such as manufacturers of plastics, paints and thinners, in refineries, and in other areas where ignitable vapors, dust, moisture and corrosive elements may be present. Suitable for outdoor saltwater locations and for other wet locations. Features Fixtures operate safely in high ambient temperatures. Patented wireless design. Threading of fixture unit onto mounting hood makes electrical connection. The only wiring required is attaching two wires to connection block in mounting hood. Connection block is easily wired: (a) loosen two screws; (b) make wire connections; and (c) re-position connection block. Safe, easy servicing without disconnecting any wiring. Wireless fixture unit threads off mounting hood for convenient servicing or for immediate replacement with a stand-by unit. Acme double-lead threads speed installation and fixture removal from mounting hood only half as many turns are required as for single-lead threads. The threads do not stick or gall, eliminating problems often encountered with single-lead threads during fixture unit removal. Strategic location of lamp socket, in combination with interior prism design of the glass globe, provides optimum light distribution and control. Heat- and impact-resistant globes have smooth dust-resistant exterior. Superior corrosion resistance, with epoxy powder coat finish. Porcelain socket with nickel-plated phosphor bronze screw shell. Assures long trouble-free operation in high ambient areas. Choice of mountings: pendant, ceiling, bracket and stanchion. Fiberglass-reinforced polyester reflectors, in standard dome or 30 angle styles, are ideal in installations where luminaire is subject to exceptionally severe corrosive atmospheres. All threaded joints are flame-tight. Heat- and impact-resistant globes have smooth dust-resistant exterior. Superior corrosion resistance, with epoxy powder coat finish. Optional guards protect globes from damage. Secured to fixture with three stainless steel screws. Medium base lamp socket. Maximum voltage 250 Vac 50/60 Hz. Standard Materials Fixture housing, mounting hoods and guards: copperfree (4/10 of 1% max.) aluminum Globes: prismatic glass Reflectors: fiberglass reinforced polyester Standard Finishes Fixture housing, guards and mounting hoods: epoxy power coat finish, electrostatically applied for complete, uniform corrosion protection Options Add suffix -Z for Exd IIB + H 2, Zone 1. NEC Certifications and Compliances UL Standard: UL 1598, UL 1598A, UL 844 UL Listed: E10444 615
Order using catalog numbering guide below or select catalog number from tables on following pages. Catalog Numbering Guide CI P 30 75 G Series: CI Code Master Incandescent Wattage: 30 100 W A21 200 W A23 300 W PS25 Options: G Guard Blank No Guard Z - Exd IIB + H 2, Zone 1 Mounting Hood: P B Wall Bracket C S Stanchion Hub Size: 75 3/4 100 1 150 1-1/4 or 1-1/2 Technical Data Thermal Suitability of Code Master Incandescent Fixture. T Numbers Represent the Maximum External Temperature for Class I, Division 1 Locations and Maximum Surface Temperature Under Dust Blanket for Class II, Division 1 Locations. T Number Temp Range ( C) Temp Range ( F) Lamp Type T1 350 325 T2 T2A T2B T2C T2D T3 T3A T3B T3 T4 T4A T5 T6 351-450 664-842 326-350 619-662 301-325 574-617 Lamp Watts (Max.) 281-300 538-572 261-280 502-536 Use Wire Supply C ( F) 231-260 448-500 216-230 421-446 201-215 394-419 Ambient Temperature C ( F) 181-200 358-392 166-180 331-356 161-165 322-329 Class I, Division 1, Groups C and D 136-160 277-320 121-135 250-275 101-120 214-248 Class II, Division 1, Groups E, F and G Incandescent (A21) 100 75 (167) 40 (140) T5 T3C Incandescent (A23) 200 75 (167) 40 (140) T4 T3C Incandescent (PS25) 300 75 (167) 40 (140) T3C T3C 86-100 187-212 85 185 NOTE: The maximum operating temperature of the fixture must not exceed the ignition temperature of the gas, vapor or dust to be encountered per the National Electrical Code and the Canadian Electrical Code. Certified to meet the Canadian Electrical Code (CEC) only. 616
Type Mounting Hub Size (Inches) Catalog Number. 3/4 CIP3075 1 CIP30100 3/4 CIC3075 1 CIC30100 Wall Bracket 3/4 CIB3075 1 CIB30100 Mounting Hoods Bracket 1-1/2 CIS30150 Type Mounting Hub Size (Inches) Hood Weight kg (lb) Catalog Number 3/4 0.9 (1.98) CAP-75 1 0.9 (1.98) CAP-100 3/4 1.8 (3.97) CAC-75 1 1.8 (3.97) CAC-100 3/4 2.7 (5.95) CALB-75 1 2.7 (5.95) CALB-100 1-1/4 or 1-1/2 0.9 (1.98) CAS-150 1-1/2 Tapped hub furnished with 1-1/2 to 1-1/4 reducer. 1 Hubs are listed for Group D only. Catalog numbers shown are supplied with clear lens. Add suffix G for optional Guard. 617
Fixture Unit Only Description Weight kg (lb) Catalog Number Not including mounting hood 5.0 (11.02) CJNC30I Optional White Polyester Reflector Standard Dome 1.1 (2.43) KR2-ST Optional White Polyester Reflector Angled Reflector 1.1 (2.43) KR2-AN Optional Aluminum Guard Optional Three Way Exit Sign Replacement Connection Block 0.2 (0.44) CJGU-15 3.4 (7.50) CJEXRN 0.2 (0.44) VPT-7 618
CAP75 CAC75 Bracket CALB75 1-1/4 or 1-1/2 NPT CAS150 Standard Dome KR2-ST Code Master Incandescent Fixture Unit CJNC30I Angle Reflector KR2-AN Dimensions in Millimeters (Inches) Hub for.75" NPT Conduit 114.3 (4.50) 343.7 (13.53) 334.0 (13.15) 95.3 (3.75) Optional Aluminum Guard CJGU-15 125.0 (4.92) 99.6 (3.92) 151.3 (5.95) 10.4 (0.41) Wall Bracket 62.5 (2.46) 125.0 (4.92) Optional Three Way Exit Sign CJEXRN 352.6 (13.88) 314.5 (12.38) Hub For 2 Wiring access cover both sides. 349.3 (13.75) 108.0 (4.25) 57.9 (2.28) 31.2 (1.23) 87.9 (3.46) 292.1 (11.50) 349.3 (13.75) 45.5 (1.79) 25 114.3 (4.50) 339.9 (13.38) 330.2 (13.00) Hub for.75" NPT Conduit Four Sides 303.0 (11.93) 326.9 (12.87) 150.4 (5.92) 290.3 (11.43) 317.0 (12.48) 619