DUAL WIRELESS CHARGING PAD, 10W X 2 Almohadilla de carga inalámbrica doble, 10W X2 USERS GUIDE
Thank you for purchasing our Dual Wireless Charging Pad, 10W X 2 Included in this document are technical specifications of the Wireless Charging pad and instructions for use. Before using this product please read the manual carefully. 1
FEATURES Charge 2 devices quickly and efficiently with 10W of power per coil. Just drop and charge! Wireless Charging, no more tangled charging cables to clutter your desk or home. Simultaneously charges up to 2 devices at once Lightweight and compact, weighing less than 3.5 oz with an ultra-slim design, so it fits comfortably in your backpack or briefcase. Built-in over-voltage, short-circuit, over-current, over-heating protection to safely charge your devices Universal phone charging station for all your Qi Enabled devices. Extra-long 5ft. USB Type C cable with 5V 3A AC Wall Adaptor included. Our products are compliant with FCC certifications 2
PACKAGE CONTENTS: 1X Jarv 10W X 2 Dual Wireless Charging Pad 1X 5V/3A AC Wall Adaptor 1X 5ft. Type C USB Charging Cable SPECIFICATION: Capacity: 10W X 2 Wireless Charger: Input: 5V/3A Output 1: 10W, 7.5W, 5W Output 2: 10W, 7.5W, 5W Dimensions: 7 x 3.2 x 0.02 inches Weight: 3.3 oz (bulk) Compatibility: Qi enabled devices, USB enabled devices. 3
DEVICE OVERVIEW: 1. Type C Input Charging port 2. Wireless Charging Coil 3. LED Indicator display 2 3 1 4
LED INDICATOR GUIDE: STATUS Wireless Charging mode ready Wireless Charging in use INDICATOR Red LED indicator light Green LED indicator light 5
GETTING STARTED: CONNECTING YOUR WIRELESS CHARGING PAD 1. Connect the supplied AC wall adaptor and USB charging cable to the charging base of the charging pad and then to a wall outlet. For optimal charging efficiency please use a 3.6A/19V AC wall adaptor (not included) 5FT CHARGING YOUR WIRELESS DEVICES This wireless charging pad works with most Qi enabled devices 1. Place your Qi enabled device on either of the two 6
wireless charging coils. Make sure the center of the device is aligned over the center of the charging coil. Charging will begin on contact. 2. The LED indicator will turn Green to indicate a wireless device is being charged. If the Green LED light does not turn on, please make sure your device is properly aligned to the wireless charging coil. DO NOT PUT ANY METAL OR MAGNETS BETWEEN THE WIRELESS CHARGING PAD AND YOUR DEVICE WHILE CHARGING WIRELESSLY 7
WARNING AND PRECAUTIONS: Keep your wireless charging base dry and away from moisture and corrosive materials. Do not clean your wireless charging base with harsh chemicals, soaps or detergents. Just wipe it with a soft, water-dampened cloth. To prevent fire or shock hazard, do not expose this unit to rain or moisture. Do not expose this unit to extremes of temperature. Immediately terminate use of the product if the item bulges, smells or leaks. Check the voltage of the power adaptors carefully before using. It is a normal phenomenon that there is a buzzing sound while charging. Do not put any metal or magnetic items between the wireless charger and your device while using the wireless charger (such as coins, keys, magnetic phone backing or holder, etc.) Do not place this unit directly onto furniture surfaces with any type of soft, porous, or sensitive 8
finish. As with any rubber compound made with oils, the rubber finish could cause marks or staining where the product resides. Lithium batteries, like all rechargeable batteries are recyclable and should be recycled or disposed of in normal household waste. Contact your local government for disposal or recycling practices in your area. They should be incinerated since they might explode. NOTE: This device uses an internal rechargeable battery. If you suspect your battery may be dead after several attempts to charge, please visit www.jarvmobile.com for support. Never disassemble the unit or attempt to remove the battery as that could cause leakage of an electrolyte substance 0/
FCC WARNINGS WARNING: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user s authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protections against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment on and off, the user is encouraged to try to correct the interference by one or more of the following measures. Reorient or relocate the receiving antenna Increase the separation between the equipment and receiver Connect the equipment into an outlet on a circuit different from that to which the receiver is connected 00
WARRANTY At Jarv, we are commited to making the highest quality product. To back this up, your Jarv product is warrantied for One (1) full year from the date of purchase. Please visit our website www.jarvmobile.com for more details. Call or Email us at: customerservice@jarvmobile.com or Toll free number: 855-206-6634 01