EMB Manufacturing Inc. Boomer Line St. Clements, On N0B 2M0 Canada Ph: (59) 99-9283 Fax: (59) 99- www.embmfg.com WX520 Trailer Log Splitter Parts Manual S/N 2E9USES250328 & After 250328 & After Refer to the operators manual for safe operation and maintainance Rev J 2
Foreword EMB Mfg. has prepared this parts manual to assist customers in ordering quality OEM replacement parts. Proper and regular service and replacing old, worn or broken parts with the correct Wallenstein parts are essential to prolonging the life of your Wallenstein product. Please refer to this manual before ordering any replacement parts. All information contained in this parts manual is based on the latest product specification available at the time of printing this manual. If your product differs from the specifications contained within this manual contact EMB Mfg. for information. EMB reserves the right to alter specifications on their products at any time. Reproduction of this parts manual of any kind is prohibited without prior written permission from EMB Mfg. For parts and information please contact your dealer. If your dealer is no longer availalble please go to our website: http://www.embmfg.com and click on FIND A DEALER NEAR YOU for information on a local dealer. Page 2 of
Table of Contents Bolt Torque Hydraulic Fitting Torque 5 Cylinder Main Parts 7 Hub 8 Valve and Fittings 8 Valve 9 Engine & Pump Elevation Kit (Optional) 2 Light Kit (Optional) 3 Decal Breakdown Page 3 of
Bolt Torque CHECKING BOLT TORQUE The tables shown below give correct torque values for various bolts and capscrews. Tighten all bolts to the torques specified in chart unless otherwise noted. Check tightness of bolts periodically, using bolt torque chart as a guide. Replace hardware with the same strength bolt. Torque figures indicated above are valid for non-greased or non-oiled threads and heads unless otherwise specified. Therefore, do not grease or oil bolts or capscrews unless otherwise specified in this manual. When using locking elements, increase torque values by 5%. * Torque value for bolts and capscrews are identified by their head markings. ENGLISH TORQUE SPECIFICATIONS Bolt Diameter "A" SAE 2 (N.m) (lb-ft) Bolt Torque* SAE 5 (N.m) (lb-ft) SAE 8 (N.m) (lb-ft) /" 5/" 3/8" 7/" /2" 9/" 5/8" 3/" 7/8" " 8 3 27 95 28 225 230 35 0 20 30 5 0 95 5 70 225 2 25 5 72 0 55 25 390 570 850 9 9 33 53 80 5 0 290 20 30 7 3 3 00 55 220 305 50 880 320 2 27 5 75 5 5 220 00 50 970 METRIC TORQUE SPECIFICATIONS Bolt Diameter "A" M3 M M5 M M8 M0 M2 M M M20 M2 M30 M3 8.8 (N.m) (lb-ft).5 3 0 25 50 90 0 225 35 750 95 200 Bolt Torque*. 2.2 7 8 37 03 32 553 03 97 0.9 (N.m) (lb-ft).8.5 9 5 35 70 25 200 30 0 050 200 375.3 3.3 7 2 52 92 8 229 50 77 550 270 Page of
Hydraulic Fitting Torque Tightening Flare Type Tube Fittings *. Check flare and flare seat for defects that might cause leakage. 2. Align tube with fitting before tightening. 3. Lubricate connection and hand tighten swivel nut until snug.. To prevent twisting the tube(s), use two wrenches. Place one wrench on the connector body and with the second tighten the swivel nut to the torque shown. Tube Nut Size Torque Recommended Size Across Value Turns To Tighten OD Flats (After Finger Tightening) (in.) (in.) (N.m) (lb-ft) (Flats) (Turn) 3/ 7/ 8 / / 9/ 2 9 / 5/ 5/8 2 / 3/8 / 2 8 / /2 7/8 3 / 5/8 2 / 3/ -/ 02 75 3/ /8 7/8-3/8 22 90 3/ /8 The torque values shown are based on lubricated connections as in reassembly. Page 5 of
ORIENT SEALS AS SHOWN 3 2 " x 2" STROKE CYLINDER PARTS ITEM PART NO. Description QTY. 20C02 Rod, -/2 x 2 20C0 Barrel, " 3 G00-50SA " Bore x -/2" Rod Gland P00-00SA " Bore Piston 5 SLK-05 Seal Kit, x -/2 Z72292G8 Hex Lock Nut NF Grade 8 Page of
5 A C D B 5 2 3 2 0 2 B C 3 A 7 27 3 2 25 8 7 9 D 3 2 8 9 0 2 30 20 2 23 29 33 3 3 2 20C0 Cylinder, x 2 x -/2 3 20S2 Plate, Cylinder Retaining (Bolt) 205A0 Assembly, Push Block 5 2052A205 Assembly, GX 5.5hp Engine to gpm Pump 2052W707 Weldment, WX520 Main Base 7 2052W702 WX520 Base 8 2052W70 Weldment, Hitch Mount 9 Z550 Vented Plug Dipstick x 9" 0 205W08 Weldment, Fender 2 Z232 Snapper Pin 3/8 x 2-/2 2 Z522 Reducer FP x MP 208 3 Z533 Elbow 90 MP x FPX 0808 2 Z5230 /2 Hose, MP08 x MP08 x 3" 5 Z52303 /2 Hose, MP08 x MP08 x 33" Z52305 /2 Hose, MP08 x MP08 x 2" 2 7 Z5205 Suction Hose, " x 22" 8 Z5530 Oil Filter - 3/ - Particulate 9 Z55302 Filter Cap, 3/ x 3/ 20 Z7530 Hex Bolt /2NC x 3 2 2 Z7555 Hex Bolt /2NC x 5-/2 3 22 Z7222 Hex Lock Nut 5/NC 23 Z7223 Hex Lock Nut 3/8NC 8 2 Z7225 Hex Lock Nut /2NC 5 25 Z7225 Hex Lock Nut /2NC 2 Z723 Carriage Bolt 3/8NC x 8 27 Z790 Hose Clamp, # 2 28 Z9202 Assembly, 000# -Bolt Hub 2 29 Z930.80-8 LRB SportTrail 2 30 Z9 2" Hitch Coupler 3 Z92303 Safety Chain / x 2' 2 32 Z92303-2 Safety Snap 2 33 Z9503 Manual Tube 3-/2 Short 3 2052W20 Jack Stand, Front 33 22 28 WX520 PARTS BREAKDOWN 0 205S7 Cap, Push Block (Bolt) 205W02 Push Block, Bolted 2 Z7325 Hex Bolt 3/8NC x 2-/2 3 Z757 Hex Bolt /2NF x -/2 2 Z7223 Hex Lock Nut 3/8NC Page 7 of
2 5 5 0 000# -BOLT HUB PARTS BREAKDOWN Z2320 L3 Cone, L0 Cup 2 2 Z2830 Double Lip Seal -/ Shaft 3 Z2920 Grease Fitting, /8NPT Z7293 Lug Nut /2NF 5 Z920 000# -Bolt Hub Z980 Dust Cap.98 Bore 0 Z729 Slotted Hex Nut NF 5 Z2322 Cotter Pin 3/ X 2 2 VALVE AND FITTINGS PARTS BREAKDOWN ITEM PART NO. Description QTY. Z533 Elbow 90 MP x FPX 0808 2 Z5209 Valve, Single Function Detent 3 *Z520* Valve, Closed Center * Z595 Complete Handle Kit for Z5209 5 Z72 Hex Lock Nut /NC 3 Z75 SHCS, /NC x -3/ 3 *CLOSED CENTER VALVE REQUIRED FOR "C" MODELS.* 5 Page 8 of
- NOTES:. SUB-R (#7) REMOVED FROM FRONT VIEW TO INCREASE CLARITY OF SUB-LS (#). 2. SPOOL REMOVED FROM TOP VIEW TO INCREASE CLARITY 7? 5 REV. DATE DESCRIPTION A //0 REPLACED SF88(2PC) W/ LS30 2 8 ITEM NO. QTY. PART NO. DESCRIPTION AOCASTB AO CASTING 2 LS30TJ SPOOL 3 P70 NAME TAG SF305 WIPER 5 SF30 QUAD RING SUB-LS SUB-LS B5057 7/ BALL DC70 3/ BALL SF30 RETAINER SF77L SH LS ENDCAP XDC72 LS SLEEVE SF83 SPACER 2 SF8 ALLEN SCREW 2 SF89 CENTER STOP SF90 CENTERING SPRING SF92 HOUSING SF35 SPACER LS305 DETENT SPRING DC7583 O-RING 3-902 SF9 O-RING, BLUE, METRIC LS30 LS WIPER SF502 5/ LOCK WASHER SF503 PLUNGER, SPRING SF50 5/ HEX JAM NUT 7 SUB-R RELIEF P03 CAP NUT SF322 O-RING 2-0 SF3A ADJ. SCREW B505 SPRING SF3A POPPET 8 SDC-HJ Z595 HANDLE KIT SF377 RETAINER SF37 SEAL RETAINER SF37A CLEVIS SF38 HANDLE 2 SF39 PIN 2 P77 PIN CLIP HP5 MACH. SCREW SF3 KNOB SF308 CAP SCREW SF303TJ SPOOL 9 P5 WARNING TAG TITLE: BRAND HYDRAULICS CO., INC 2332 SOUTH 25TH STREET, OMAHA NEBRASKA 805 LS VALVE w/ NON-AJUSTABLE KICKOUT MATERIAL: STANDARD TOLERANCE UNLESS NOTED: 0.00 0.00 (0.05 GCI) 0.000 0.005 (0.00 GCI) =.005 TIR FRACTION /32 ANGLE 2 DIMENSIONS ARE IN INCHES P/N ENDING IN "UF" HAVE NOT RECEIVED FINISH OPERATIONS FINISHING SPECIFICATIONS: HEAT TREAT: - 2RC X - GRIND: - PLATE: - DRAWN BY: JB DATE: /29/0 APRV'D BY: APRV'D DATE: SCALE: :3 PART NO: LS755TJRSH Page 9 of
Note: This diagram is for reference only. Parts not sold separately. 5 7 7 8 REV. DATE DESCRIPTION 2 0 9 3 8 3 5 ITEM NO. QTY. PART NO. DESCRIPTION B5057 7/ BALL 2 DC70 3/ BALL 3 SF30 RETAINER SF77L SH LS ENDCAP 5 SF80 SD SLEEVE SF83 SPACER 7 2 SF8 ALLEN SCREW 8 2 SF89 CENTER STOP 9 SF90 CENTERING SPRING 0 SF92 HOUSING SF35 SPACER 2 LS305 DETENT SPRING 3 DC7583 O-RING 3-902 SF9 METRIC O-RING 5 LS30 LS WIPER SF502 5/ LOCK WASHER 7 SF503 SPRING PLUNGER 8 SF50 5/ HEX JAM NUT 2 A SECTION A-A A TITLE: BRAND HYDRAULICS CO., INC 2332 SOUTH 25TH STREET, OMAHA NEBRASKA 805 LOG SPLITTER SUB-ASSEMBLY MATERIAL: - STANDARD TOLERANCE UNLESS NOTED: 0.00 0.00 (0.05 GCI) 0.000 0.005 (0.00 GCI) =.005 TIR FRACTION P/N ENDING IN "UF" HAVE NOT RECEIVED FINISH OPERATIONS FINISHING SPECIFICATIONS: HEAT TREAT: - /32 2RC X - ANGLE 2 GRIND: - DIMENSIONS ARE IN INCHES PLATE: - DRAWN BY: DATE: APRV'D BY: APRV'D DATE: SCALE: JCRAIG 0/0/200 :2 PART NO: SUB-LS Page 0 of
2 7 9 0 8 3 3 5 2 2052A205 PARTS BREAKDOWN Z0 Shaft Coupler L075 x 3/ 2 Z08 Coupler Spider L075 3 Z0 Shaft Coupler L075 x /2 Z52 Key 5/ x 5/ x 5 Z592 Woodruff Key, /8 x /2 Z72 Honda GX0 Engine 7 Z533 Elbow 90 MP x FPX 0808 8 Z5320 Pump, gpm Two-Stage 9 Z5380 Pump Mounting, PM-5 0 Z720 Hex Bolt 5/NC x Z725 Hex Bolt, 5/NC x -/2 2 Z7273 Hex Bolt, 5/NF x 3/ 3 Z7222 Hex Lock Nut 5/NC Page of
3 2 2089A00 ELEVATION KIT (Optional) Z723 Carriage Bolt 3/8NC x 2 Z7223 Hex Lock Nut 3/8NC 3 2089W0 Weldment, Tank Spacer 2089W0 Weldment, Hitch Mount Page 2 of
WX TRAILER SPLITTER WIRING KEY Bl BLUE Br BROWN Gr GREEN Rd RED Yl YELLOW Bk BLACK Wh - WHITE RIGHT SIDE Gr STOP TAIL TURN -WIRE EXTEND PAST COUPLER BY 2" Br Gr Yl Br Wh GROUND ALL COMMON TO FRAME Br LICENSE LAMP Br Wh Yl STOP TAIL TURN LEFT SIDE 3 7 5 8 2 0 2089A355 LIGHT KIT (Optional) 9 2052L209 Light Bracket, LH Split 2 2052L20 License Bracket 3 205L0 Light Bracket, RH 205W03 Light Guard, RH 5 205W0 Light Guard, LH Z0 Stop, Turn, Tail Light LH 7 Z07 Stop, Turn, Tail Light RH 8 Z30 License Lamp 9 Z205 0" Wishbone Trailer Harness 0 Z729 Serrated Washer Nut /NC Page 3 of
Decal Breakdown TWO PANEL HORIZONTAL LOG SPLITTER DECAL BREAKDOWN Z99 CAUTION - Read Manual 2 Z923 Keep Feet Clear 3 Z907 Clear Guide 2 Z905 Wallenstein 2 5 Z909 Made in Canada 3 Z92 99 db Sound Level 7 Z92 Keep Hands Clear 5 2 3 5 7 3 5 Page of
Two Panel Trailer Splitter Decals Z909 Z92 Z907 Z905 Z99 Z923 Z92 Page 5 of
WALLENSTEIN Products Manufactured by: EMB MFG Inc. Boomer Line St. Clements, Ontario Canada N0B 2M0 Phone: -877-95-9283 Fax: 59-99- www.embmfg.com