Vendor Name: Contact Person: Street Address: P.O. Box: City, State, Zip Phone #: Toll Free #: Fax #: Email Address: Website: Titan Machinery Inc Andy Bethel 644 East Beaton Drive West Fargo, ND 952-445-0365 800-795-9274 952-445-0365 andy.bethel@titanmachinery.com www.titanmachinery.com Furnish separate price quote for: EXCAVATOR 1.1 Make & Model Case CX130C Operating Weight 28,600 lb Engine Make & Model Isuzu 4JJ1X Tier (Interim 4 or Final)? Tier 4 Interim HP at rated RPM (specify net or gross) 100 hp net Number of speeds Two-speed Max travel speed, MPH 3.5 mph Drawbar pull, lbs. 25,853 lb Shoe width, in. 24" # of rollers on lower track Seven per side Ground pressure, PSI 4.8 PSI Ground clearance, in. 17" minimum Overall width of excavator 8' 6" Main pump(s) total flow, GPM 68.2 GPM Swing speed, RPM 14.3 RPM Boom length, ft-in 15' 2" Arm length, ft-in 8' 2" Arm breakout force, Normal, lb-ft 12,589 lb Max dig depth, ft-in 19' 10" Reach at ground line, ft-in 28' 4" Dump height, ft-in 21' 11" Lift over end, 10, lbs. 17,215 lb Lift over end, max reach, lbs. 3,152 lb Lift over side, 10, lbs. 10,965 lb Lift over side max reach, lbs. 2,165 lb Bucket breakout force, normal lb-ft. 22,233 lb Tail swing radius, ft-in. 7' 0" Does excavator include bucket? no If so, description Warranty Terms: hours/months/years 3 yr 3,000hr factory warranty Price $ 111,115
2.0 OPERATOR ENVIRONMENT OPTIONS 2.1 Air Suspension seat std 2.2 Front window safety glass std 2.3 Automatic Climate Control System ( heater & A/C ) std 2.4 Radio - AM-FM w/dual rear mounted speakers std 2.5 Sliding cockpit & pressurized cab std 2.6 Fire Extinguisher std 2.7 Selector valve for control pattern (factory only) $ 507 2.8 Rain Deflector, not for use with front mesh or rock guards, 3.3, 3.4, 3.5 $ 257 2.9 Sun Visor $ 73 2.10 Rear View Camera std 2.11 Side View Camera $ 470 3.0 EXCAVATOR EXTERIOR AND POWERTRAIN OPTIONS 3.1 Whelen strobe $ 590 3.2 FOPS top guard, level 2 $ 760 3.3 Front rock guard - vertical bars, one piece $ 1,540 3.4 Front rock guard - two piece / upper and lower $ 1,335 3.5 Front screen - 2" by 2" mesh $ 880 3.6 Vandal guard $ 388 3.7 Dozer Blade $ 7,316 3.8 Refuel Pump $ 615 4.0 UNDERCARRIAGE OPTIONS 4.1 24" Shoes, steel, 3-bar std 4.2 28" Shoes, steel, 3-bar $ 800 4.3 20" Rubber link track $ 5,600 4.4 Double Track Chain Guide $ 493 5.0 HYDRAULICS OPTIONS 5.1 Automatic Power boost std Plumbing and actuation for auxiliary hydraulics 5.2 Hammer Circuit, Joystick activated $ 3,605 (Provides single pump flow plumbing to end of arm and return to tank through additional filter. Includes remote adjustable relief valve to match attachment pressure requirements) 5.3 Double acting, Joystick activated, single or double pump flow $ 5,080 (Provides single or dual pump bi-directional flow to end of arm. Includes plumbing and valving to operate single direction flow with return to tank through additional filter (included). Includes remote relief valve for single direction operations. This kit allows the use of two different types of attachments on an excavator, such as a breaker and a grapple 5.4 Double acting, general purpose, trigger switch activated. $ 3,037 (Recommended for use with a thumb kit. Plumbing to the end of the boom, no hydraulics provided on the arm. Actuated by trigger switches in the right and left hand controls. Right controls one-way flow, left controls opposite flow. Right hand switch is the same switch that controls the boost. Switch in left console turns power boost and auxiliary hydraulics on and off.) 5.5 Second Auxiliary Hydraulics, low flow (joystick operated, provides rotation or tilt for hydraulic $ 3,530 attachments such as shears and tilt buckets). 5.6 Free Swing (switch activated) $ 167 6.0 BOOM AND ARM OPTIONS 6.1 15' 2" Boom std 6.2 8' 2" Arm std 6.3 9' 10" Arm $ 737 6.4 6' 10" Arm $ 390 6.5 Hose Burst Check Valve (boom and arm) $ 5,354 7.0 BUCKET/COUPLERS/TOOL OPTIONS 7.1 Hydraulic Coupler $ 5,173 7.2 24" Heavy Duty Bucket (for 7.1) $ 2,757 7.3 30" Heavy Duty Bucket (for 7.1) $ 3,060 7.4 36" Heavy Duty Bucket (for 7.1) $ 3,320
7.5 42" Heavy Duty Bucket (for 7.1) $ 3,473 7.6 48" Ditching Pin-on Bucket $ 2,024 7.7 60" Ditching Pin-on Bucket $ 2,296 7.8 24" Heavy Duty Pin-on Bucket $ 1,995 7.9 30" Heavy Duty Pin-on Bucket $ 2,080 7.10 36" Heavy Duty Pin-on Bucket $ 2,252 7.11 42" Heavy Duty Pin-on Bucket $ 2,530 7.12 24" Extra Heavy Duty Pin-on Bucket $ 2,137 7.13 30" Extra Heavy Duty Pin-on Bucket $ 2,370 7.14 36" Extra Heavy Duty Pin-on Bucket $ 2,597 7.15 42" Extra Heavy Duty Pin-on Bucket $ 2,772 7.15 F9 FSP Hydraulic Breaker $ 9,675 7.16 F9 QT Quiet Technology Hydraulic Breaker $ 10,150 7.17 F6 FSP Hydraulic Breaker $ 11,170 7.18 F12QT Quiet Technology Hydraulic Breaker $ 30,585 7.19 HP135II FT $ 9,735 7.20 CW18III $ 4,610 7.21 CW24III $ 6,330 7.22 Fecon BH47EXC-1 (pin-on, Consult Excavator Mfg for correct hydraulics) $ 34,815 7.23 Fecon BH47EXC-2V (pin-on, Consult Excavator Mfg for correct hydraulics) $ 39,445 7.24 Fecon BH47EXC-3V (pin-on, Consult Excavator Mfg for correct hydraulics) $ 41,475 7.25 Fecon BH62EXC-1 (pin-on, Consult Excavator Mfg for correct hydraulics) $ 37,275 7.26 Fecon BH62EXC-2V (pin-on, Consult Excavator Mfg for correct hydraulics) $ 41,545 7.27 Fecon BH62EXC-3V (pin-on, Consult Excavator Mfg for correct hydraulics) $ 45,155 8.0 COMPLETE SET OF OEM AIR AND FLUID FILTERS $ 1,000 9.0 INSTALLATION: HOURLY RATE FOR ATTACHMENT INSTALLATIONS, ETC.: (See Special Terms and Conditions) $ 112 10.0 OEM EXTENDED WARRANTY OPTIONS Case standard warranty is for 3 years -3000 hours - Case Warranty covers the CASE machine only. Protection Plan must be purchased with-in first 90 days or add 15% additional during base warranty. Mfg's standard warranty is applicable to non-case equipment. Case Purchased Protection Plan - Zero deductible Months/hours Coverage 10.1 48/3000 - power train only $ 417 10.2 48/4000 - power train only $ 596 10.3 60/4000 - power train only $ 804 10.4 60/5000 - power train only $ 1,048 10.5 48/3000 - Major Components $ 800 10.6 48/4000 - Major Components $ 1,145 10.7 60/4000 - Major Components $ 1,547 10.8 60/5000 - Major Components $ 2,017 10.9 48/3000 - Premier $ 1,068 10.10 48/4000 - Premier $ 1,527 10.11 60/4000 - Premier $ 2,063 10.12 60/5000 - Premier $ 2,690 11.0 NEW EQUIPMENT RENTAL PROGRAM If rental programs are available on the new equipment offered, with the option to purchase, list the hourly/weekly/monthly rental rate. Indicate the percent of rental fee paid by the purchaser that will be applied to the purchase price. See Solicitation Special Terms & Conditions. 11.1 Summer Rental Rate - April 1 through Sept 30. Summer Hourly Rental Rate: N/A Summer Weekly Rental Rate: $ 1,593 Summer Monthly Rental Rate: $ 4,300 Percent (%) of Rental Fee applied to purchase price: 80% first 90 days 75% thereafter Winter Rental Rate - October 1 through March 31 11.2 Winter Hourly Rental Rate: N/A Winter Weekly Rental Rate: $ 1,593
Winter Monthly Rental Rate: $ 4,300 Percent (%) of Rental Fee applied to purchase price: 80% first 90 days 75% thereafter If the new rental equipment is purchased and finance charges are applicable for the actual rental term only, state the actual interest rate here:
12.0 VENDOR OWNED RENTAL RETURN OR DEMO EQUIPMENT PROGRAM See Solicitation Special Terms and Conditions. DEDUCT cost per Used Hour from the original Contract Price $ 18 13.0 DISCOUNT OFF LIST PRICE FOR RELATED PARTS AND ACCESSORIES - (See Special Terms and Conditions) Price List Date and Number 10% Discount Work-Brau 2015 Catalog 5% Discount Price List Date and Number Woods Exc. Attach Aug 1, 2013 25% Discount Price List Date and Number Case Excavator Attachments 8/01/14 0% Discount Price List Date and Number FAE USA Inc January 1, 2014 10% Discount Price List Date and Number Atlas Copco July 1, 2014 14.0 DELIVERY CHARGES - SEE SPECIAL TERMS AND CONDITIONS NO FLAT RATE ALLOWED DELIVERY STARTING POINT - City, State, Zip Nearest Titan Machinery Inc. Case CE Location Price per loaded mile $ 4 MINIMUM DELIVERY CHARGE (if any) $ 250