EJC 430 1 EJC 430 TECHNICAL SPECIFICATION Payload: 30 tons (27.3 tonnes) Dump box volume:.7 yd³ (.3 m³) 02, EJC Loaders Division reserves the right to change this
2 EJC 430 General Arrangement 65 o 430 4.6 m (. ft.) Note: all dimensions in millimetres. Dimensions in brackets are in inches. All vertical dimensions are for an empty unit and are based on a tire radius of 813 mm (32") 02, EJC Loaders Division reserves the right to change this
EJC 430 3 Standard Unit Specifications General Information Power Train Main Dimensions Total length 9550 mm 376 in Total width 2921 mm 114 in Height with safety canopy 2667 mm 5 in Height of dump box 2286 mm 90 in Dump Height 5283 mm 8 in Operating Weights Total 24091 kg 53000 lb. front axle 750 kg 34650 lb. rear axle 8341 kg 18350 lb. Shipping weight 23682 kg 520 lb. Loaded Weights Total 51364 kg 113000 lb. front axle 23114 kg 50850 lb. rear axle 280 kg 620 lb. Capacities Payload 27.3 tonnes 30 tons Dump box volume.3 m³.7 yd³ Dump Box Motion Times Discharging time 17 sec. Dumping angle 65 Driving Speeds Forward and Reverse (Loaded) 1st gear 5.5 km/h 3.4 m.p.h. 2nd gear.0 km/h 6.2 m.p.h. 3rd gear 17.7 km/h 11.0 m.p.h. 4th gear 32.2 km/h m.p.h. Frame Rear and front frame Material Central hinge Welded steel box construction G40.21-50wt Cat.#3 full plate, clevis type with spherical bearings Engine Diesel engine Detroit Diesel Series 60 Output 224 kw (300 HP) @20 RPM Torque 1424 Nm (50 ft.lb.) @1350 RPM Number of cylinders In line 6 Displacement 11.1 litres (667 in3) Cooling system Liquid Cooled Combustion principle Direct injected, turbo charged, after cooled Air filtration Donaldson, dry type Electric system 24 V Exhaust system Catalytic purifier with silencer Fuel tank capacity 378.5 l 0 US gal. Converter Dana SOH C8612 Transmission Dana SOH 5421 Axles Front axle Rear axle Single stage, 3.05 torque ratio, 0.895:1 offset ratio 4-speed forward and reverse Dana SOH 19D4354, standard differential, oscillating 16 total. Dana SOH 19D4354, standard differential, fixed. Tires Tire size 21:00 R Type Michelin XKA** Air pressure, front 552 kpa 5.52 bar 80 psi Air pressure, rear 552 kpa 5.52 bar 80 psi Systems Steering Hydraulics Full hydraulic power steering, centre articulated with double acting steering cylinder. Open centre system with a gear pump and pilot operated stick steer. 02, EJC Loaders Division reserves the right to change this
4 EJC 430 Turning Radius Inner 4394 mm 173 in Outer 8433 mm 332 in Turning angle 42.0 Main Components Hydraulic pump Control valve Steering cylinder Dump Box Hydraulics Full hydraulic open-centre system with two gear pumps. Oil flows to the dump box hydraulic system from the dump box pump and the steering pump when the steering system is not in use. Pilot operated lever dump box control. Standard Brakes Service brakes are spring applied, hydraulically released, liquid cooled (LCB) multi-disc brakes on all wheels. Service brakes also function as an emergency brake, when the emergency brake system is engaged. Gear pump Pilot operated 127 mm bore X 64 mm rod (5.0" X 2.5") Pressure Settings Main relief 17.2 MPa 172 bar 00 psi Port relief valves 18.6 MPa 186 bar 2700 psi Main Components Dump cylinders (2) 2-stage telescopic, 184/2 mm bores (7./6.0 ) Hydraulic pump Gear pump Control valve Pilot operated Pressure Settings Main relief 17.2 MPa 172 bar 00 psi Port relief (dump) 17.9 MPa 179 bar 2600 psi Hydraulic oil tank capacity 283 l 75 US gal. Main Components Pressure accumulators Brake pedal valve Electrical Equipment Alternator Batteries Starter Driving and working lights Piston type with charging valve Modulated 24V 70A, min 2 x 12 V, 950 CCA 24 V, Heavy Duty 4pcs front, 2pcs rear Other Standard Equipment Central hydraulic pressure test points Electric gauges Central manual lubrication system Back-up alarm, audible. SAE hose fittings Central hydraulic pressure test points Manuals All manuals are delivered on CD-ROM in Adobe Acrobat (PDF) format. Distribution Manual Type Customer Market Area Spare parts manuals 1 Copy 1 Copy Operator s manual 1 Copy 1 Copy Service manual 1 Copy 1 Copy Optional Equipment Specifications Available Alternative Equipment Diesel Engine Deutz BF6M-C 300 hp (224 kw) Automatic Lubrication Lincoln modular Tires 26.5 R E-3 Radial Alternative Dump Box Options SAE dump box.7 m³ 14 yd³ SAE dump box 13.0 m³ 17.5 yd³ Snub Nose box with tail gate - 4.5 m ( ft.) dump height 17.6 m³ 23.0 yd³ Available Add-On Options Dump box Split dump box rework Abrasion resistant box liners Operator s compartment SAE ROPS canopy Enclosed operator s cab with A/C (solid mounts) Fire suppression systems Manual - Ansul 8 nozzles, 2 tanks Automatic (Checkfire II) - Ansul 8 nozzles, 2 tanks Hand held fire extinguishers 4.5 kg lb. 9.1 kg lb. Emergency steering system SAE J-11, electric Fuel Tank Wiggins fast fuel system 02, EJC Loaders Division reserves the right to change this
EJC 430 5 Tractive Effort Curve (Metric Units) 340 3 EJC 430 ENGINE: DET. DIESEL DDEC 60 AXLES: 19D4354 CONVERTER: CL8612 TIRES: 21:00 R TRANS: 5421 Payload: 27 Tonnes 300 280 260 240 2 1'st Rolling resistance (%) F (kn) 0 180 160 140 2'nd Without torque converter lock-up With torque converter lock-up Empty 0 2 4 6 8 Full Load 0 2 4 6 8 1 0 80 60 40 3'rd 4'th 0 0 2 4 6 8 12 14 16 18 22 24 26 28 30 32 34 36 38 40 42 Speed (km/h) 5Grade (%) 5 02, EJC Loaders Division reserves the right to change this
EJC 430 6 Tractive Effort Curve (US Units) 80 75 EJC 430 ENGINE: DET. DIESEL DDEC 60 CONVERTER: CL8612 TRANS: 5421 AXLES: 19D4354 TIRES: 21:00 R Payload: 30 tons Tractive Effort (Klbf) 70 65 60 55 50 45 40 35 1'st 2'nd Without torque converter lock-up With torque converter lock-up Rolling resistance (%) EMPTY FULL LOAD 0 2 4 6 8 0 2 4 6 8 30 5 0 3'rd 4'th 0 1 2 3 4 5 6 7 8 9 11 12 13 14 16 17 18 19 21 22 23 24 26 Speed (mph) Grade (%) 5 5 02, EJC Loaders Division reserves the right to change this
EJC 430 7 Productivity Curve (Metric Units) EJC 430 D PRODUCTIVITY CURVE 300 0 Basic data for calculations: Payload 27273 KG Overall Speed limit km/h Fixed Cycle time 4 min Fixed cycle time includes the time for filling, dumping, turning and accelerating TONNES PER HOUR 0 0 0 Slope/Grade (%) Hor./0 1:/ 1:7/ 1:5/ Loaded speed (km/h) Empty speed (km/h) 8 5.3 4.7 50 0 0 500 00 00 00 00 3000 3500 4000 4500 ONE WAY DISTANCE IN METRES 0% % % % 02, EJC Loaders Division reserves the right to change this
EJC 430 8 Productivity Curve (US Units) EJC 430 D PRODUCTIVITY CURVE 300 0 Basic data for calculations: Payload 60000 lbs. Overall Speed limit 12.4 mph Fixed Cycle time 4 min Fixed cycle time includes the time for filling, dumping, turning and accelerating TONS PER HOUR 0 0 Slope/Grade (%) Hor./0 1:/ 1:7/ 1:5/ Loaded speed (mph) 12.4 Empty speed (mph) 12.4 5.0 12.4 3.3 12.4 2.9 12.4 0 50 0 0 00 00 3000 4000 5000 6000 7000 8000 9000 000 100 0 13000 14000 ONE WAY DISTANCE IN FEET 0% % % % 02, EJC Loaders Division reserves the right to change this