Valves Fittings Actuators
Low Emission Valves to 50 PPM Cast Steel Valves 150 2500 ASME; CE Registered Gate, Globe & Check Valves; WCB & High Temperature Chrome Valves; Low Temperature Valves; Flanged, Butt-weld, RTG, End Connections; API 600 Design; 13 Chrome, 316 & Special Alloy Trims Stainless Alloy Valves 150 1500 ASME; Gate, Globe, Check & Ball Valves; 316, 317, A-20, 347, Monel, Inconel & other High Alloy Materials. ANSI, B16.34, API 600 and Cryogenic Designs Ball Valves 150-1500 ASME; Floating Soft Seat, V-Port, Metal Seated and Trunnion Design; API 607 5th Edition; Hypatite, PTFE, Pure Teflon, Carbon Filled, Metal Seat Designs; CSA/ UL Certification; Lever, Gear & ISO 5211 Automated Operation Brass Bronze & Iron Valves Gate, Globe, Check, Balls Valves & Strainers; CSA, NSF Lead Free, UL, FM, LP Designs; Extension Stems, Locking Handles & Multiple Operators DJ Series Butterfly valves 150-250 Designs; 2" to 24"; Ductile Iron Body; 2 Piece Low Profile Aluminum Bronze, SS or Ductile Disc; G/F PTFE Low Friction Bearings; EPDM & Buna Liners; Lever, Gear or Direct Mount Actuation. BALL VALV ES Kitz/Perrin Special State of the Art & Custom Ball Valves; Two Way, Three Way & Multi Port Valves for Temperature of -190 C to +800 C, Sizes Ranging from 1/2"-24" to 2500 ASME Class - High Alloy Body Materials & Special Seating Configurations A-Series Brass Appliance Valves CSA Approved; 1 & 2 piece Body Designs; Threaded & Flare End connections B-Series Brass Ball Valves Full and Reduced Port Designs; ASTM 37700 Qualified Brass & Cast Bronze Models; NPT, Solder, PEX, Compression End Connections; SS Trim; Drain & Quick Opening Valve Designs; CSA, NSF, UL, FM & 250 lb Steam Models; Extension Stems & Locking Handles; In Line Check Valve C-Series Carbon Steel Ball Valves 1, 2 & 3 Piece Body Designs; Full and Regular Port; A105, WCB, LCC Body Materials; Threaded, Encapsulated Body Bolt & Seal Weld Designs; API 607 5th Edition; Stainless Steel, Chrome, 250 lb Steam & NACE Trim; NPT, Socket Weld End Connections; Positive Locking Lever, Deadman & ISO 5211 Automated Operation F-Series Flanged Ball Valves 150-600 ASME; 1 & 2 Piece Body; Full & Regular Port Design; WCB, LCC & 316 Body Materials; NACE; Fire Safe Design (API 607 Optional); Lever, Gear and ISO 5211 Automated Operation G-Series Stainless Steel Ball Valves 1, 2 & 3 Piece & 3-Way Body Designs; Full & Regular Port; 316 & 317 Body Materials; Threaded & Encapsulated Body Bolt Design; API 607 5th Edition 250 lb Steam Service Seats; NPT, Socket Weld, Butt Weld End Connections; Positive Locking and Deadman Handles; Lever or ISO 5211 Direct Mount Automation. HM-Series High Pressure 3 Piece Ball Valves 3 Piece High Pressure Forged Steel Ball Valves; A105N, LF2 & CF8M Body Materials; 3000 & 6000 PSI (3" 2000 PSI / 4" 1000 PSI); Full Port & Reg. Port Designs; Delrin, PEEK & RPTFE Seating Materials; API 607 5th Edition; NACE / MR-01-75-2002; Large Ductile Iron Positive Lock Handle; ISO 5211; Anti-Static Device
Bronze, Brass & Iron Valves Gate, Globe, Check, Ball and Tankless Water Heater Valves & Strainers; NPT, Solder, EZ-Grip, EZ-Press, Flanged End Connections; CSA, NSF, UL, FM Designs; Extension Stems, Locking Handles, Multiple Operators. Butterfly valves 150-250 Designs; 2" to 24"; Ductile Iron Body; 2 Piece Low Profile Aluminum Bronze, SS or Ductile Disc; G/F Low Friction Bearings; EPDM & Buna Liners; Lever, Gear or Direct Mount Actuation Fan Coil Assembly & Bronze Circuit Balancing Valve. Corrosion Resistant Valve Materials 304 SS, 316 SS, 317 SS, A-20, 254 SMO and the High Alloy Materials Knife Gate Valves Full Port Design; Metal, Resilient Bi directional Positive Shut Off & 60% V-Port Designs Tilting Disc Check Valves Flanged End Connections; Off Center Pivot Design Wedge Gate, Globe & Swing Check Valves 150 & 300 ASME & 200 WOG; Flanged, NPT & Socketweld Sampling Valves Full Positive Shut Off; All 316 SS Construction; 2" X 1 1 /2" Instrument Valve All 316 SS Construction; Instrument/Transmitter Isolation Processes WKM DynaCentric High Performance & Resilient Seated Butterfly Valves Complete With a 2 Year Double C Factory Warranty WKM HPBV 150-600 ANSI; 2 1 /2" 30" Wafer & Lug Body Designs; WCB, LCC, CF8M Body Materials; Temperature Range 50 to 1000 F; Bi Direction Teflon, Metal to Metal Class V & Fire Safe Seat Design; Double Offset Eccentric Disc to Seat Closure Motion; Grounded Stem to Disc Connection; Available with Stellite Coated Disc, Live Loaded Packing & Purge/Monitor Ports WKM/Navco E-Series Resilient Seated Butterfly Valves 200 PSI 2" - 12" 150 PSI 14" - 24" Cast Iron; Wafer/Ductile Iron Lug Type Body Design; EPDM & Buna Seats; DI, Alum Bronze & 316 SS Disc Demco Resilient Seated Butterfly Valves Complete With a 2 Year Double C Factory Warranty 285, 200, 150 PSI Models; Cast Iron, Ductile Iron & Carbon Steel Body Materials; Multiple Seat to Disc Combinations; SS, Monel, Al Bronze, DI, A-20, Hastelloy C, Low Profile Disc Materials; Non- Squeeze Cartridge Seat Designed for Reliable Dead End Lug Service Shut-Off; Truly REPAIRABLE SEAT/ Disc Design; Lever, Gear, Extended and Automated Operation
Forged Steel Valves 150-4000 ASME; Gate, Globe & Check Valves; Reduced & Full Port Flow Designs; A105N, 316, F-5, F-11, F-22, F-91, LF2 & Other Specialty Body Materials; 13% Chrome, HF, FHF, Alloy, NACE & Multiple Trim Materials; Threaded, Socketweld, PSW & Flanged End Connections; Bolted, Welded, Bellow Seal, Drain, Pressure Seal, Y-Pattern Body Types Cast Steel Valves 150-2500 AMSE; API 600; Gate, Globe, Check, Pressure Seal, Thru Conduit, Parallel Slide Body Designs; WCB, Low Temp, High Alloy Chrome, Stainless Alloy Body Materials; Flanged & Buttweld End Connections JMC Trunnion Mounted Ball Valves 150-2500 ASME; 5000 10,000 PSI Available on Special Order Request; A105N, LF2, A182, F316, Duplex, Monel, & Other Special Body Materials; 316 or EPM Ball & Seat Rings; Viton, Viton/GLT, Nylon, NBR, PTFE, RTFE & Other Seating Materials; RF, RTJ, FF, BW End Connections; API 6D, 6FA, 607; CE, CSA, Z245.15 and Double Piston Design (double sealing barrier in both directions); NACE; Double Block & Bleed; Anti- Static & Blow-Out Proof Stem; Pressure Relieving Seats; Lever, Gear & ISO 5211 Automation Cast Steel 150-2500 ASME; API 600/ ASME B16.34; Gate, Globe, Check & Pressure Seal Designs; WCB, LCC, SS & High Chrome & Alloy Body Materials; NACE Conformance; Flanged, Butt Weld, RTJ End Connections; API Trim 1, 2, 5, 10, 12, 16, Bronze; Handwheel, Chain Wheel or Motor Operated. Forged Steel 150-1500 ASME; API 602, Gate, Globe (Y & T Pattern), Lift Check, Swing Check & Extended Body Design; A105N, LF2, F-316 Body Materials; Bolted Bonnet & Welded Bonnet Body Designs; HF, FHF, Alloy Trim Materials; Threaded, Socket Weld, TSW & Flanged End Connections Wafer Check Valves 125, 150, 300 & 600 lb Pressure Class. Cast Iron, Cast Steel and Stainless Steel Materials. Viton A, Teflon and Stainless Steel seats. ULC Approved models, ANSI, and API Designs. Outside Lever, Counterweights and Dashpots Available.
ProMation Engineering Inc. Strainers Cast Iron, Ductile Iron, Max-Air/MAS brand product line includes: Y-Type 125-2500# Iron, Stainless Steel Flanged Pneumatic Double Acting ¼ turn CSA Approved Electric Bronze, Carbon, 316 SS and Ball Valves. & Spring Return 1/4 actuators from 55 lb to Special Alloys in Threaded, Unique Patented Teflon Turn Actuators, Solenoid 40,500 lb; ¼ turn Spring Socketweld and Flanged Fused Stainless Steel Valves and Limit Switches. Return Electric actuators from Configurations Ball Lowers Torque and High Cycle Reliability, 90 /lb to 2300 /lb, Linear Simplex Basket 125-300# Provides the Unequaled Compact Rack & Pinion electric actuators offering up Iron, Bronze, Carbon, and Corrosion Resistance of Design Available With to 100mm stroke and 4400 Stainless Steel through 72" Teflon. ANSI Class Face to Technopolymer, Extruded lb thrust, as well as Energy Ball-Plex/Duplex 125-600# Face Dimensions for Gate Aluminum & Stainless Steel Storage Devices providing Critical Service Strainers Valve Retrofits. Flanged & Housings. Easily Adjustable & critical fail-safe positioning in Iron, Bronze, Carbon, Grooved End Design. Extremely Versatile ISO 5211 for all non-spring return Stainless Steel with Mounting Flanges. A Great Fit models. Standard features Flanged or Threaded End When Using Our MAS Direct include manual override, Connections Through 24" Mount G-series Ball Valves. heater, and auxiliary switches. UL Listed Fireline Strainers Unlimited Cycle Warranty. Additionally a complete array of accessories including local control stations, timers, cold weather heaters, and many Fabricated and Specialty products 150# through 2500# Actuators & Controls others are available. A perfect solution for actuating the Check Valves entire line of MAS Ball and 2"- 56" Control, Wafer, Butterfly Valves. Center Guided, Silent and Double Disc Check Designs in Iron (UL), Carbon, Fittings Stainless and Special Alloy, Chexter Check Light Weight Wafer Valves. Butterfly Valves Viton, Teflon, EPDM and Buna Pneumatic Industrial and Commercial Designs. Double Acting, Spring Return and Linear Applications. Accessories Include Malleable Pipe Fittings 150 lb and 300 lb. 1/8" to 6" Sizes. Black and Galvanized. Positioners, Solenoids,Limit Switches, Speed Controls and Position Monitors. Electric Operators for Quarter, Multiturn, On/Off Modulating and Fail Safe. Technical data, dimensions, materials & specifications are subject to change without notice. MAS LC0911 Printed in Canada
www.mastewart.com Head Office 12900 87th Avenue Surrey, British Columbia Canada V3W 3H9 mail to: P.O. 258, Surrey, BC, V3T 4W8 Phone: (604) 594-8431 Toll Free North America: 1-800-594-8431 Fax: (604) 594-4335 Ontario Branch 252 Hunt Street Ajax, Ontario L1S 1P7 Phone: (905) 683-7303 Fax: (905) 683-9108 Alberta Branch 6125-56th Avenue Edmonton, Alberta T6B 3E2 Phone: (780) 436-9051 Fax: (780) 435-0463 Toll Free in Alberta 1-800-232-7376 Quebec Branch 79H Brunswick Blvd. Dollard-des-Ormeaux, Que. H9B 2J5 Phone: (514) 421-6311 Fax: (514) 421-6323 Sales Offices Calgary, Alberta Phone: (403) 252-7262 Fax: (403) 253-8455 Winnipeg, Manitoba Phone: (204) 837-5604 Fax: (204) 896-1992 Dartmouth, Nova Scotia Phone: (905) 683-7303 Fax: (905) 683-9108 Long Beach Branch 1811 E. 28th Street Signal Hill, CA 90755 Phone: (562) 595-1811 Toll Free: 1-888-337-7598 Fax: (562) 426-6016 Bakersfield Branch 5225 Gilmore Ave. Bakersfield, CA 93308-6302 Phone: (661) 322-1935 Toll Free: 1-877-258-6166 Fax: (661) 322-6719 Charlotte Branch 803 Pressley Road, Suite 107 Charlotte, North Carolina, 28217 Phone: (704) 527-0722 Toll Free: 1-866-582-5837 Fax: (704) 527-0791 Toll Free: 1-866-810-9287