CHIPPING HAMMER Chipping concrete blocks in building and civil engineering work Removal of various burrs Assistance in electric work, sewage work, gas work, etc. PICK HAMMER Light yet powerful. Suitable for digging soft rocks and crushing and ditching concrete. For Chipping haer Steel ( Round shank ) Steel ( Hexagon shank ) Spade CH55 Ⅱ CH55 ⅡV ( Vibration isolation type ) CH Ⅱ CH ⅡV ( Vibration isolation type ) PAVING BREAKER CH55 Ⅱ 5.3 Effective for simple work on roads, ditching, breaking hard concrete structure, etc. 24 0.4 CH55 ⅡV 5.3 24 0.4 CH Ⅱ 6.0 0.7 φ17.45 x 60 H14. x 60 CH ⅡV 6.0 0.7 V(Vibration isolation type) V 7.0 8.0 470 485 35 35 125 125 1.2 1.2 φ26 x φ26 x Specifications of steels Length () Length () 0 Specifications of steel Length () 450, 600 Length () 450 φ17.45 x 60 0, 350 H14. x 60 Edge width () 50 For Pick haer Pick steel Spade φ26 X Edge width () 76 CH55, CH CH55, CH CH55, CH For Paving breaker Steel ( Hexagon shank ) Spade ( Hexagon shank ) Steel ( Round shank ) Steel retainer for spade ( Optional ) Spade ( Round shank ) 1 B B40 B60 B44 B90 B 15.5 585 1.0 H25 x 108 B40 18.5 665 1.4 H25 x 108 B60.5 666 1,550 1.4 B44.5 692 2.0 B90 42.0 747 1,400 2.2 V FCB20 Ⅱ FCB20 ⅡV ( Vibration isolation type ) ( Vibration isolation type ) 15.0 492 0.8 φ26 x V 15.0 492 0.8 φ26 x FCB20 Ⅱ 21.2 556 1.65 φ x 87 FCB20 ⅡV 21.2 556 1.65 φ x 87 Specifications of steels Length () 400, 450, 600 φ26 X 400, 450, 600 φ X 87 450 H25 X 108 5, 600, 0 H X 152 Length () Edge width () 400, 450 FCB20 B B40 B60 B90 FCB20 2
HAND DRILL Widely used for breaking rocks in quarries or for road constructions and other civil engineering work. LEG DRILL These medium-sized and large-sized drills for horizontal drilling are proven evaluated at mines, tunnel construction, dam construction, etc. 112D 112D V ( Vibration isolation type ) 217D 217D V ( Vibration isolation type ) 22D 22D V ( Vibration isolation type ) 2D ( Leg : Optional ) PD90L( Leg : Optional ) Type of blow 112D.6 485 H x 83 H22 x 83 112D V 16.1 5 H x 83 H22 x 83 217D 20.8 5 2.4 217D V 21.0 566 2.4 22D 26.9 612 ~ 25 22D V 29.5 660 ~ 25 Inside diameter of air hose Inside diameter of water hose Type of blow Leg used 2D 26.9 705 ( ) ( ) Wet LB56 PD90L.9 670 4.5 25 ( ) ( ) Wet LC77 Bit C=, X=, T=Taper Rod size 22 Gauge 26 40 42 44 50 55 60 65 CT-26 CT- CT- CT- CT- CT- 22CT- 22CT- 22CT- 22CT- 22CT- 22CT- 22CT-40 22CT-42 22CT-44 Parts No. XT-26 XT- XT- XT- XT- XT- 22XT- 22XT- 22XT- 22XT- 22XT- 22XT- 22XT-40 22XT-42 22XT-44 22XT-50 22XT-55 22XT-60 22XT-65 Rod Effective length Shank length Taper Stem Collar Effective length 500 0 1,400 1,700 2,0 2,600 2,900 3,900 4,400 4,900 Overall length 600 900 1,200 1,500 1,0 2,100 2,700 3,000 3,500 4,000 4,500 5,000 HT-S-6 HT-S-9 HT-S-12 HT-S-15 HT-S-18 Part No. 22 H22T-(S)(L)-6 H22T-(S)(L)-9 H22T-(S)(L)-12 H22T-(S)(L)-15 H22T-(S)(L)-18 H22T-(S)(L)-21 H22T-(S)(L)-24 H22T-(S)(L)-27 H22T-(S)(L)- H22T-(S)(L)-35 H22T-(S)(L)-40 H22T-(S)(L)-45 H22T-(S)(L)-50 H=Hexagon Shank length:s=83 L=108 Reaming bit Rod size ( ) 22 Gauge ( ) 65 70 90 100 120 0 Set parts No. DXB-65 DXB-70 DHB- DHB-90 DHB-100 DHB-120 DHB-0 DHB- Parts No. DXBR-65 DXBR-70 DHBR- DHBR-90 DHBR-100 DHBR-120 DHBR-0 DHBR- Hose fitting parts Band Spat Nut Stem 3 4
PALM DRILL Cutting stones Anchoring work Drilling large boulders, rock bed, objects of civil engineering, etc. AIR AUGER Auger drills soft rocks and clayey rocks which cannot be drilled easily with impact rotary drills. Since an oil sump is installed, durability of parts is improved greatly. The rod turns to the right so that it can drive anchor bolts. 6D 6D V ( Vibration isolation type ) AA1 ( Hand feed type ) 6D 6D V 5.9 7.4 424 0.85 φ-h14.6 x 88 G3/8 458 0.85 φ-h14.6 x 88 G3/8 Output Revolution kw AA1 8.8 266 900 2.6 ( Bit & Rod : Optional ) Rod length:1000 1200 0 10 2000 Bit ( Diameter : 42 ) Operation method Direct lever For Palm drill For 15T Gauge : 20, 22 Wedge Option For T Gauge : 24~ For 15T Gauge : 20, 22 For T Gauge : 24~ Blade ( ) Wedge ( ) 205 Diameter ( ) Dry shank ( RS-95 ) Wet shank ( RS-94 ) Rod adapter ( RS-90 ) 205 Taper rod for 15T ( 20 22 ) 145 160 235 240 245 Hose assembly with swivel ( AS-100 ) ( ) 200,0,400,500,600,700,0,900,1000,2000 165 260 Snake-head rod for T ( 24~ ) Wedge for breaker ( ) 0,400,500,600,700,0,900,1000,1200 Blade ( ) Wedge ( ) Diameter ( ) Insert bit 600 155 5 Edge width ( ) Length ( ) 14.0 250,0,350,400,500 16.0 250,0,400,500,600,700,0,1000 18.0 0,400,500,600,700,0,1000 20.0 0,400,500,600,700,0,1000 22.0 0,400,500,600,700,0,1000 Effective length is 120 shorter than overall length. 6
Leg drill Chipping haer Auger drill Palm drill Paving breaker Hand drill FRD Furukawa reserves right to change specifications without prior notice. 5-3, 1-chome, Nihonbashi, Chuo-ku, Tokyo 103-0027, Japan Phone +81-3-31-6982 Fax +81-3-31-6994 Pneumatic tools-e1204-f3 Printed in Japan