PIPING PRODUCTS FLANGE BOLT ACCESSORIES NUT, BOLT, GASKET S* Non-Asbestos Gaskets Material: ASTM F Line Call Out: F70A9BE22KM Color: Green Thickness: / Min. / Max. Temperature: - F / 00 F Max. Operating Temperature: 30 F Continuous Max. Operating Pressure: 00 PSI Maximum PxT (PSIG x F): 30,000 Creep Relaxation: 30% (ASTM F3) Recovery: 0% (ASTM F36) Red Rubber Gaskets Material: Red Rubber Color: Red / Reddish Orange Thickness: / Min. Temperature: - F Hardness: 0 Shore A (ASTM D2) Tensile: 00 PSI (ASTM D) Elongation: 20% (ASTM D) Compression Set: 22 Hrs @ F, % (ASTM D39B) Heat Aging: 70 Hrs @ F (ASTM D73) Changed Hardness: Points Changed Tensile: -% Changed Elongation: -76% Bolts Material: Carbon Steel ASTM A307 Grade A Sizing: ANSI B.2. Tensile: 60,000 PSI Minimum Elongation: % Minimum Rockwell Hardness: 69-0R b Nuts Material: Carbon Steel SAE J99 Grade 2 Sizing: ANSI B.2.2 Size Ranges Non-Asbestos Kits 0# Ring Gaskets - /2 to 300# Ring Gaskets - /2 to Red Rubber Kits 0# Ring Gaskets - 2 to 0# Full Face Gaskets - 2 to Figure Number Matrix ** F N W NBG Z Pressure Material Type 6 Size NUT/BOLT/ GASKET = NBG FINISH ZINC = Z PRESSURE 0 = 300 = 3 MATERIAL NON-ASBESTOS = N RED RUBBER = R TYPE RING = R FULL FACE = F THICKNESS / = 6 /2 = D 2-/2 = L = 3/ = F 3 = M = = G = P = -/ = H = S = -/2 = J 6 = U = 2 = K = X = Note: Physical properties are nomil values obtained from laboratory test samples. Actual production values may vary. Please ensure the product meets your application specification prior to order placement. * Each kit contains components for one flange. ** Note: Not all combitions in the matrix are available. Consult your supplier on specific material, rating, and size combitions. 0 NE Columbia Blvd. - Portland, Oregon USA 972 Phone: 03-27-33 - Fax: 03-2-9677 - www.fnw.com
PIPING PRODUCTS FLANGE BOLT S LUGGED BUTTERFLY VALVE BOLT PACKS* Material: Carbon Steel ASTM A307 Grade A Sizing: ANSI B.2. Tensile: 60,000 PSI Minimum Elongation: % Minimum Rockwell Hardness: 69-0R b Sizes: 2 to (0# Flanges Only) * Each kit contains components for two flanges. Figure Number Matrix F N W LBB Z Size Material: Mineral Reinforced Nylon 66 Resin, Minlon B0 NC0 Color: White Tensile: 3,03 PSI (ASTM D63) Elongation: 2.% (ASTM D63) Heat Deflection Temperature: 66 PSI - 2 F (ASTM D6) 26 PSI - 2 F (ASTM D6) Melting Point: 0 F (ASTM D3) Specific Gravity: (ASTM D792) Sold Individually * Sizes: /2, /, and 3/ LUG BFV BOLTS = LBB BOLT INSULATORS A FINISH ZINC = Z 2 = K = P = X 2-/2 = L = S = 3 = M 6 = U = Dimensions (Inches) Size A B ØC ØD ØE /2 0.0.030. 0.30 0.9 / 0.70.33.32 0.67 0.72 3/ 0.0 9 70 0.777 0.0 Minlon is a DuPont registered trademark * Sold individually but packaged 0 pieces per bag, 00 pieces per carton. A A - A Figure Number Matrix F N W CBI Size DOC: FNWNBG0 Ver. /09 09 - FNW. All rights reserved. The FNW logo is a registered trademark of Ferguson Enterprises, Inc. BOLT INSULATOR = CBI /2 = D / = E 3/ = F The contents of this publication are presented for information purposes only, and while effort has been made to ensure their accuracy, they are not to be construed as warranties or guarantees, expressed or implied, regarding the products or services described herein or their use or applicability. All sales are governed by our terms and conditions, which are available on request. We reserve the right to modify or improve the designs or specifications of our products at any time without notice. Always verify that you have the most recent product specifications or other documentation prior to the installation of these products.
Flange Accessory Kits ROBERTS CO. 9 AVENUE R GRAND PRAIRIE, TX 700 TOLLFREE:.00.3.99 roberts.riexco.com
FLANGE ACCESSORY S Description Flange Accessory Kits are used to adjoin two ANSI/ASME B. or ANSI/ASME B. flanges by means of a hex head machine bolt, hex nut and gasket. Flange Accessory Kits contain hex head machine bolts, nuts and a gasket. Bolt Kits contain hex head machine bolts and nuts only. Butterfly Capscrew Kits are used to adjoin a flange to a Lug Style Butterfly Valve and contain hex head machine bolts only. Single sided kits adjoin one flange to the valve while double sided kits adjoin two. Specifications Hex Head Machine Bolt Material - ASTM A307 Gr. A Dimensions - ANSI/ASME B.2. Thread Pitch -ANSI/ASME B. (UNC) Thread Fit - Class 2A Minimum tensile - 60,000 psi Hex Nut Material - ASTM A63 Gr. A Dimensions - ANSI/ASME B.2.2 Thread Pitch -ANSI/ASME B. (UNC) Thread Fit - Class 2A Available Coatings Plain - Light oil finish Zinc - ASTM B633 Type III (Clear) Packaging Cardboard Box - stapled with 3 mil shrink wrap ANSI B. CL / ANSI B. CL 0 2-/ 2-/XL XL " " 2 /- x 2-/ /- x 2-/ /- x /- x 2-/ /- x /- x 3/- x 3-/ 3/- x 3-/ 3/- x 3-/ 7/-9 x 3-3/ 7/-9 x 3-3/ "- x -/ "- x -/ -/-7 x -/-7 x -/-7 x -/ 3.2. 2 3 2 60 BOLT NonASBESTOS RED RUBBER ROBERTS CO. 9 AVENUE R GRAND PRAIRIE, TX 700 TOLLFREE:.00.3.99 r o b e r t s. r i e x c o. c o m
ANSI B. CL / ANSI B. CL 0 2-/ 2-/XL XL " " 2 /- x 2-/ /- x 2-/ /- x /- x 2-/ /- x /- x 3/- x 3-/ 3/- x 3-/ 3/- x 3-/ 7/-9 x 3-3/ 7/-9 x 3-3/ "- x -/ "- x -/ -/-7 x -/-7 x -/-7 x -/ 3.2. 2 3 2 60 ANSI B. CL 20/ ANSI B. CL 300 2-/ /- x 3/- x 3-/ 3/- x 3-/ 3/- x 3/- x 3/- x -/ 7/-9 x 3.. 9.2 BOLT NonASBESTOS RED RUBBER BOLT NonASBESTOS RED RUBBER Butterfly Capscrew Flange Accessory Kit (Non Asbestos) Flange Accessory Kit (Red Rubber Gasket) Flange Bolt Kit ROBERTS CO. 9 AVENUE R GRAND PRAIRIE, TX 700 TOLLFREE:.00.3.99 r o b e r t s. r i e x c o. c o m