Table of Contents Passenger Premium Engine Oils LUKOIL GENESIS PREMIUM... 4 Engine Oils LUKOIL LUXE SYNTHETIC... 6 LUKOIL LUXE... 8 LUKOIL LUXE TURBO DIESEL...10 LUKOIL SUPER...11 LUKOIL STANDART...12 LUKOIL FLUSH SERVICE OIL...13 LUKOIL MOTO 2T...14 LUKOIL MOTO 4T...15 LUKOIL MOTO GARDEN...16 LUKOIL MOTO OUTBOARD...18 Technical Fluids LUKOIL ANTIFREEZE...20 LUKOIL ANTIFREEZE EXTRA G11...21 LUKOIL ANTIFREEZE ULTRA G12...22 Commercial Engine Oils LUKOIL AVANTGARDE PROFESSIONAL LS...24 LUKOIL AVANTGARDE PROFESSIONAL...25 LUKOIL AVANTGARDE ULTRA...26 LUKOIL AVANTGARDE EXTRA...28 LUKOIL AVANTGARDE...29 LUKOIL DIESEL M-8G2K, M-10G2K...30 LUKOIL DIESEL M-8DM, M-10DM...31 Transmission Transmission Oils LUKOIL TRANSMISSION TM-5...33 LUKOIL TRANSMISSION TM-4...34 LUKOIL TRANSMISSION TM-4/5...35 LUKOIL ATF...36 LUKOIL ATF SYNTH ASIA...37 LUKOIL ATF SYNTH HD...38 LUKOIL GEYSER MM...39 LUKOIL TSp-15k...40 Industrial and Special Hydraulic Oils LUKOIL GEYSER ZF...42 LUKOIL GEYSER LT...43 LUKOIL GEYSER ST...44 LUKOIL IGS...45 Compressor Oils LUKOIL STABIO...46 Reductor Oils LUKOIL STEELO...47 Slide Way Oils LUKOIL SLIDO...48 Turbine Oils LUKOIL TORNADO T...49 Transformer Oils LUKOIL VG...50 Industrial Oils LUKOIL SUPPORTO...51
General Information LUKOIL is a major international vertically-integrated oil & gas company, accounting for 2.2% of global crude oil output. LUKOIL was established in 1991 by merging a group of oil-and-gas production companies located in the Western Siberian cities of Langepas, Urai and Kogalym. The initial letters of these cities were derived to form the acronym LUK. LUKOIL, one of the world s largest oil companies, operates on the principle From the Wellhead Down to the Gas Station, meaning that it is active in oil production, refining, wholesale and retail sale of petroleum products. The Company s marketing network encompasses 22 countries worldwide, including Russia, CIS countries (Ukraine, Belarus, Azerbaijan, Moldova), EU countries (Finland, Poland, Romania, Bulgaria, Hungary, the Czech Republic, Georgia, Lithuania, Latvia, Croatia, Estonia, Belgium, Cyprus), Turkey, Serbia, Macedonia, Montenegro, and the United States. The company accounts for 1.0% of global oil reserves and 2.2% of global oil production. LUKOIL s operations are organized into three business segments: Exploration and Production (E&P); Refining, Marketing and Distribution; and Petrochemicals. The E&P segment includes exploration, development, and production operations relating to crude oil and natural gas. These activities are located primarily within Russia, with additional activities based in Azerbaijan, Kazakhstan, Uzbekistan, the Middle East, Colombia, and northern and western Africa. The Refining, Marketing, and Distribution segment includes refining and transport operations, as well as marketing and trading of crude oil, natural gas, and refined products. LUKOIL runs four main oil refineries in Russia with a combined refining capacity of approximately 45.1 mln t, and refineries outside Russia (Odessa (Ukraine), Burgas (Bulgaria), Ploiesti Refinery (Romania), Helsinki (Finland), and Izmir (Turkey)). The company is focused on increasing product volume exported as well as expanding geographical diversity. LUKOIL s retail network spans 30 countries, including Russia, the Baltic States, the CIS and Europe. In December 2010 we commissioned a catalytic cracking facility at our Nizhny Novgorod refinery, the largest catalytic cracking facility built in Russia for the last 25 years, enabling production of gasoline which is fully compliant with Euro-5 standards. LUKOIL s petrochemical business is the largest in Russia and Eastern Europe. LUKOIL has four major petrochemical plants producing various pyrolysis and organic synthesis products, fuel fractions, and polymer products. 1
2 LUKOIL Lubricants The production and sale of oils and lubricants plays an important part in LUKOIL s business. In 2005 LLK-International (LUKOIL Lubricants), a wholly-owned subsidiary of LUKOIL, was formed, and lubricants were spun off as a standalone business unit. LUKOIL Lubricants has become a unified responsibility center for this business segment, which allows LUKOIL to consolidate accounting and ensure unbiased evaluation of financial performance, react to market fluctuations, improve and develop lubricant production, conduct research, and optimize lubricant marketing. LUKOIL Lubricants produces a wide array of products that meet the most advanced operating requirements and specifications of both Russian and foreign vehicle and equipment manufacturers. This array includes base oils (used as inputs for production of ready-to-use oils and lubricants) and industrial oils for use in factory equipment, as well as motor and transmission oils for all types of transport. Today LUKOIL Lubricants controls the manufacture of more than 40% of all lubricants produced in Russia, amounting to around 1.3 mln t, and markets these products in more than 40 countries across the globe. LUKOIL Lubricants commands extensive resources enabling it to develop advanced technologies for the manufacture of lubricants and additives. At its inception, the company set up the Science and New Technology Department in charge of developing know-how technologies and the formula for new types of highquality lubricants, which advanced engineering requires. This work is performed by company specialists in close cooperation with Russian and leading world scientific organizations. By investing in science, LUKOIL Lubricants aims to enhance the quality of its product line and boost consumer demand for those products.
Passenger
Passenger Premium Engine Oils LUKOIL GENESIS PREMIUM API SN/CF SAE 5W-30 4 Approved by: MB-Approval 229.51; VW 502 00 / 505 00; BMW LL-04 Licensed: API SN; GM dexos2 Meets requirements: API CF; ACEA A3/B4-08, С3-08; Renault RN 0700, 0710 Volume (L): 1, 4, 5, 18, 50, 216.5 LUKOIL GENESIS PREMIUM is an ultra high performance synthetic multigrade engine oil. This oil is formulated for use in passenger cars and light commercial vehicles, including engines with after treatment systems. Formulated with synthetic base stocks and an advanced additive technology, LUKOIL GENESIS PREMIUM provides a reduced level of sulphated ash, phosphorus and sulphur (low SAPS) in service. The LUKOIL GENESIS PREMIUM series has advanced sludge, wear and corrosion protection, excellent piston cleanliness and ring sticking characteristics, provides very good low temperature performance and was specifically designed for use as a catalyst compatible oil in vehicles with diesel particulate filters (DPF) and three way catalysts (TWC) in high performance car and light van diesel and gasoline engines that require low friction, low viscosity, and low SAPS oils. Application LUKOIL GENESIS PREMIUM is recommended for year-round use in high performance gasoline and direct-injection diesel engines operating under severe conditions with extended drain intervals as defined by the engine manufacturer. LUKOIL GENESIS PREMIUM contributes to extended service life and efficiency of post treatment systems without compromising engine durability. Its low SAPS technology helps reduce harmful deposit build-up in vehicle diesel particulate filters (DPF) and increase exhaust post treatment system service life.
Passenger Premium Engine Oils LUKOIL GENESIS PREMIUM API SN/CF SAE 5W-40 Approved by: MB-Approval 229.51; VW 502.00 / 505.00 / 505.01; BMW LL-04; Renault RN 0700, 0710; Ford WSS-M2C917-A; Porsche A 40 Licensed: API SN; GM dexos2 Meets requirements: API CF; ACEA A3/B4-08, С3-08 Volume (L): 1, 4, 5, 18, 50, 216.5 LUKOIL GENESIS PREMIUM is an ultra high performance synthetic multigrade engine oil. This oil is formulated for use in passenger cars and light commercial vehicles, including engines with after treatment systems. Formulated with synthetic base stocks and an advanced additive technology, LUKOIL GENESIS PREMIUM provides a reduced level of sulphated ash, phosphorus and sulphur (low SAPS) in service. The LUKOIL GENESIS PREMIUM series has advanced sludge, wear and corrosion protection, excellent piston cleanliness and ring sticking characteristics, provides very good low temperature performance and was specifically designed for use as a catalyst compatible oil in vehicles with diesel particulate filters (DPF) and three way catalysts (TWC) in high performance car and light van diesel and gasoline engines that require low friction, low viscosity, and low SAPS oils. 5 Application LUKOIL GENESIS PREMIUM is recommended for year-round use in high performance gasoline and direct-injection diesel engines operating under severe conditions with extended drain intervals as defined by the engine manufacturer. LUKOIL GENESIS PREMIUM contributes to extended service life and efficiency of post treatment systems without compromising engine durability. Its low SAPS technology helps reduce harmful deposit build-up in vehicle diesel particulate filters (DPF) and increase exhaust post treatment system service life.
Passenger Engine Oils LUKOIL LUXE SYNTHETIC 6 API SN / SM / CF SAE 5W-40 Approved by: MB-Approval 229.5; VW 502.00 / 505.00; BMW LL-01; Renault RN 0700, 0710; Porsche A40 Licensed: API SN Meets requirements: ACEA A3/B4-10 Volume (L): 1, 4, 5, 18, 50, 216.5 Premium synthetic multigrade engine oil. Highly recommended for use in modern turbocharged gasoline and diesel engines of passenger cars and commercial vehicles. ADVANCED PERFORMANCE Provides easy engine cold start owing to low temperature characteristics; Provides reliable engine protection against wear and corrosion under the most severe operating conditions; Prevents formation of high- and low-temperature deposits in the engine; Neutral to the vehicle catalytic converter; Has advanced antioxidation properties.
Passenger Engine Oils LUKOIL LUXE SYNTHETIC API Approved by: Licensed: SL / CF SAE 5W-30 Renault RN 0700; Ford WSS-M2C913-C API SL, ILSAC GF-4 Meets requirements: ACEA A5/B5-08; Ford WSS-M2C913-А, WSS-M2C913-В Volume (L): 1, 4, 5, 18, 50, 216.5 7 Premium synthetic energy saving multigrade engine oil. Highly recommended for use in all modern turbocharged gasoline and diesel engines of passenger cars, vans and light trucks. ADVANCED PERFORMANCE Provides significant Fuel Economy performance; Provides easy engine cold start owing to low temperature characteristics; Provides reliable engine protection against wear, corrosion and high and low temperature deposits even under the frequent stop and start city driving conditions; Increases engine performance and reduces noise; Has advanced antioxidation properties.
Passenger Engine Oils LUKOIL LUXE 8 API SL / CF SAE 5W-30 / 5W-40 / 10W-40 Approved by: AVTOVAZ; ZMZ Licensed: API SL Meets requirements: ACEA A3/B3-04, A3/B4-04; MB 229.1 Volume (L): 1, 4, 5, 18, 50, 216.5 High quality, semi-synthetic multigrade engine oil. For use in modern turbocharged gasoline and diesel engines of passenger cars, microbuses and light trucks. ADVANCED PERFORMANCE Provides easy engine cold start; Provides reliable engine protection against wear and corrosion under the most severe operating conditions; Prevents formation of high- and low-temperature deposits in the engine; Neutral to vehicle catalytic converter; Improves engine performance and reduces noise.
Passenger Engine Oils LUKOIL LUXE API Approved by: SL / CF SAE 15W-40 AVTOVAZ; ZMZ Meets requirements: ACEA A3/B3-04, A3/B4-04; MB 229.1 Volume (L): 1, 4, 5, 18, 50, 216.5 High quality, mineral multigrade engine oil. For use in modern turbocharged gasoline and diesel engines of passenger cars, microbuses and light trucks. 9 ADVANCED PERFORMANCE Provides reliable engine protection against wear and corrosion under the most severe operating conditions; Prevents formation of high- and low-temperature deposits in the engine; Neutral to vehicle catalytic converter; Improves engine performance and reduces noise.
Passenger Engine Oils LUKOIL LUXE TURBO DIESEL API CF SAE 10W-40 Meets requirements: ACEA A3/B3-04, А3/B4-04 Volume (L): 1, 4, 5, 18, 50, 216.5 10 High quality, semi-synthetic multigrade diesel engine oil. For use in modern turbocharged direct injection diesel engines of passenger cars, vans and light trucks. ADVANCED PERFORMANCE Specially adapted for diesel fuel with high sulphur content; Provides easy engine cold start; Effectively protects engine against wear, corrosion and high-temperature deposits under the frequent stop and start city driving conditions; Ensures good anti-oxidation and dispersing properties; Optimises anti-pollution systems, such as Diesel Particulate Filter; Reduces oil consumption in used cars with diesel engines; Provides high protection for diesel turbines.
Passenger Engine Oils LUKOIL SUPER API SG / CD SAE 5W-40 / 10W-40 / 15W-40 / 20W-50 Approved by: AVTOVAZ; ZMZ Volume (L): 1, 4, 5, 18, 50, 216.5 High quality, semi-synthetic (SAE 5W-40, 10W-40) and mineral (SAE 15W-40, 20W-50) multigrade engine oils. For use in gasoline and low turbo-charged diesel engines of passenger cars and commercial vehicles. 11 ADVANCED PERFORMANCE Ensure high anti-oxidation and dispersancy properties; Prevent the formation of high- and low-temperature deposits in the engine; SAE 5W-40 and 10W-40 viscosity grade oils provide easy engine cold start; SAE 20W-50 viscosity grade oil reduces oil consumption, wear and noise level (especially in worn engines) under extended road conditions and in a hot climate.
Passenger Engine Oils LUKOIL STANDART 12 API SF / CC SAE 10W-30 / 10W-40 / 15W-40 / 20W-50 Meets requirements: AVTOVAZ Volume (L): 1, 4, 5, 18, 50, 216.5 Mineral multigrade engine oils. For use in moderate and hot (SAE 20W-50) climate zones as basic oils for gasoline and turbocharged diesel engines of passenger cars and commercial vehicles. ADVANCED PERFORMANCE Provide good anti-oxidation and dispersancy properties; Keep engine parts clean, prevents high- and low-temperature deposit formation; SAE 20W-50 viscosity grade oil reduces oil consumption, wear and noise level (especially in worn engines) under extended road conditions and in a hot climate.
Passenger Engine Oils LUKOIL FLUSH SERVICE OIL Approved by: AVTOVAZ Volume (L): 4; 20; 216.5 Mineral oil with a compound of highly effective detergent additives. For flushing vehicle engine lubrication systems without disassembly when the motor oil is changed. Quickly and efficiently removes deposits from the engine lubrication system. Provides high detergent, anti-corrosion and antiwear properties. 13 ADVANCED PERFORMANCE Effectively removes deposits from engine lubrication system parts; Considerably reduces the probability of overheating; Minimises wear of the engine rubbing parts; Regular flushing of the oil system significantly extends engine service life.
Passenger Engine Oils LUKOIL MOTO 2T API TC Meets requirements: JASO FB Volume (L): 1 14 LUKOIL МОТО 2Т modern, high-quality, mineral multigrade oil, designed for 2-Stroke gasoline engines of motorcycles, mopeds, scooters and snowmobiles. LUKOIL МОТО 2Т has good detergent, antioxidant and antiwear properties, guaranteeing excellent engine performance under any operating conditions. LUKOIL МОТО 2Т is formulated with high-quality base stocks and a highly-effective advanced ashless package of additives, which provides perfect protection for the engine even under the most severe operating conditions, significantly decreases the risk of sludge and deposits forming in the outlet system, reduces disruption of the spark plugs and the risk of surface ignition, provides greater engine efficiency, reduces fuel consumption. Owing to the careful formulation, LUKOIL MOTO 2T is virtually smokeless and is environmentally friendly. Application LUKOIL МОТО 2Т is recommended for use in modern 2-Stroke engines of motorcycles, mopeds, scooters and snowmobiles. The proportion of the mix must comply with the Operation and maintenance manual, but normally is fuel:oil = 50:1.
Passenger Engine Oils LUKOIL MOTO 4T API SL SAE 10W-30 Approved by: JASO MA2 Volume (L): 1, 4, 5, 18, 50, 216.5 LUKOIL МОТО 4Т modern, high-quality, semi-synthetic, multigrade premium oil, designed for 4-Stroke gasoline engines of motorcycles, mopeds, scooters and snowmobiles. LUKOIL МОТО 4Т provides highly-effective protection for the engine, perfect transmission operation and optimum clutch performance, has excellent detergent and antioxidant performance, improved antiwear, anticorrosion and antifoam properties. It has demonstrated incredible results when operating at low temperatures, as well as high friction performance, which guarantees excellent clutch performance even under the most severe operating conditions. LUKOIL МОТО 4Т is formulated with high-quality base stocks, synthetic components and a highlyeffective advanced package of additives produced by one of the best additive manufactures in the world, which provides perfect protection for the engine and transmission under the most severe operating conditions and extends the lifetime of your vehicle. LUKOIL МОТО 4Т meets or exceeds the requirements of all Japanese and American motorcycle manufactures. 15 Application LUKOIL МОТО 4Т is recommended for use in modern 4-Stroke high- and mid-performance engines of motorcycles, mopeds, scooters and snowmobiles, is an ideal lubricant for racing motorcycles and cross bike engines, including turbocharged ones. It is used for transmissions and clutches of modern motorcycles when required.
Passenger Engine Oils LUKOIL MOTO 2T GARDEN API TC Approved by: JASO FD Meets requirements: ISO-L-EGD; Husqvarna Volume (L): 1 16 LUKOIL МОТО 2Т GARDEN modern, high-quality, mineral premium oil, designed for 2-Stroke gasoline small engines of garden equipment. LUKOIL МОТО 2Т GARDEN is formulated with high-quality base stocks and a highly-effective advanced ashless package of additives made by one of the best additive manufactures in the world. LUKOIL МОТО 2Т GARDEN provides excellent detergent, antioxidant, antiwear and lubricating properties. The low quantity of ash significantly decreases the risk of sludge and deposits forming on the inner surfaces of the engine, reduces disruption of the spark plugs and the risk of surface ignition, provides greater engine efficiency, reduces fuel consumption and makes the oil smokeless and environmentally friendly. Owing to the careful formulation, LUKOIL МОТО 2Т GARDEN provides antiwear, highly-effective protection for the engine even under the most severe operating conditions and extends the lifetime of your garden equipment. Application LUKOIL МОТО 2Т GARDEN is recommended for use in 2-Stroke engines of lawn mowers, chain saws, cultivators and tillers. The proportion of the mix must comply with the Operation and maintenance manual, but normally is fuel:oil = 50:1.
Passenger Engine Oils LUKOIL MOTO 4T GARDEN API SG SAE 30 Meets requirements: API SG Volume (L): 1 LUKOIL МОТО 4Т GARDEN modern, high-quality, mineral premium oil, designed for 4-Stroke small gasoline engines of garden equipment. LUKOIL МОТО 4Т GARDEN is formulated with high-quality base stocks and a highly-effective advanced package of additives made by one of the best additive manufactures in the world. LUKOIL МОТО 4Т GARDEN has excellent detergent and antioxidant performance, improved antiwear, anticorrosion and antifoam properties, which provide perfect protection for the engine under the most severe operating conditions. LUKOIL МОТО 4Т GARDEN guarantees reliable protection of your garden equipment. 17 Application LUKOIL МОТО 4Т GARDEN is recommended for use in modern 4-Stroke engines of lawn mowers, chain saws, cultivators, tillers and other garden equipment.
Passenger Engine Oils LUKOIL MOTO 2T OUTBOARD Meets requirements: NMMA TC-W3 Volume (L): 1 18 LUKOIL МОТО 2Т OUTBOARD modern, high-quality, mineral premium oil, designed as a fuel/oil mixture component for 2-Stroke gasoline engines of outboards, boats, yachts, jet skis and personal water craft with both water- and aircooling systems. LUKOIL МОТО 2Т OUTBOARD is formulated with high-quality base stocks and a highly-effective advanced ashless package of additives made by one of the best additive manufactures in the world, which significantly decreases the risk of sludge and deposits forming on the inner surfaces and in the outlet system of the engine, reduces disruption of the spark plugs and the risk of surface ignition, provides greater engine efficiency, reduces fuel consumption. Owing to the careful formulation, LUKOIL МОТО 2Т OUTBOARD is smokeless and environmentally friendly. LUKOIL МОТО 2Т OUTBOARD provides excellent detergent, antiwear and lubricating performance, has a low gel formation coefficient, which provide highly-effective protection for the engine under the most severe operating conditions and extend the lifetime of your vehicle. Application LUKOIL МОТО 2Т OUTBOARD is recommended for use in modern 2-Stroke high- and midperformance water- and air-cooled engines of outboards, boats, yachts, jet skis and personal water craft, as well as for all engines where NMMA TC-W, TC-W2, TC-W3 specified oils are recommended. The proportion of the mix must comply with the Operation and maintenance manual, but normally is fuel:oil = 50:1.
Passenger Engine Oils LUKOIL MOTO 4T OUTBOARD API SL SAE 10W-30 Meets requirements: NMMA FC-W Volume (L): 1 LUKOIL МОТО 4Т OUTBOARD modern, high-quality, semi-synthetic premium oil, designed for 4-Stroke gasoline engines of outboards, boats, yachts, jet skis and personal water craft. LUKOIL МОТО 4Т OUTBOARD is formulated with high-quality base stocks, synthetic components and a highly-effective advanced package of additives made by one of the best additive manufactures in the world. LUKOIL МОТО 4Т OUTBOARD has excellent detergent, antiwear and lubricating performance, improved anticorrosion and antirust properties, thus ensuring highly-effective protection for the engine under any, even under the most difficult and severe conditions, which, in turn, significantly extends the lifetime of your outboard transportation. 19 Application LUKOIL МОТО 4Т OUTBOARD is recommended for use in modern 4-Stroke high- and midperformance water- and air-cooled engines of outboards, boats, yachts, jet skis and personal water craft, as well as for all engines where NMMA FC-W specified oils are recommended.
Passenger Technical Fluids LUKOIL ANTIFREEZE Meets requirements: ASTM D3306; ASTM D4985; BS 6580; AVTOVAZ; KAMAZ; GAZ; ZMZ; YaMZ; MAZ; MMZ; LiAZ Volume (L): 1, 4 20 High-quality, antifreeze coolant based on ethylene glycol with carboxylic acid salt corrosion inhibitor (carboxylate technology). For use in all modern car engines operating at temperature conditions above -40 C. Free of nitrites, amines, phosphates, borates and silicates. Effectively protects the engine s cooling system against corrosion and prevents scale deposits. Ready to use. Compatible with sealing materials. Freezing point: -40 C.
Passenger Technical Fluids LUKOIL ANTIFREEZE EXTRA G11 Meets requirements: ASTM D 3306; SAE J 1034; MB 325.2; Ford ESD-M97B49-A; GM-Opel QL130100; GM-Saab 6901 599; VW TL 774-C (G 11) Volume (L): 1, 4 High-quality, antifreeze coolant based on ethylene glycol and concentrate from leading manufacturers. For use in engines operating at temperature conditions above -40 C. Based on organic acid salt and silicate corrosion inhibitors. Free of amines, nitrites, and phosphates. Effectively protects the engine s cooling system against corrosion and prevents scale deposits. Ready to use. Fully compatible with LUKOIL ANTIFREEZE G 48. 21
Passenger Technical Fluids LUKOIL ANTIFREEZE ULTRA G12 22 Meets requirements: ASTM D 3306; SAE J 1034; DAF 74002; MB 325.3; Ford WSS-M97B44-D; GM- Chevrolet/GM-Opel/GM-Saab: GM 6277M; MAN 324-SNF; MTU MTL 5048; VW TL 774-D/F (G-12/G-12+) Volume (L): 1, 4 High-quality, antifreeze coolant based on ethylene glycol and concentrate from leading manufacturers. For use in all modern car engines operating at temperature conditions above -40 C. Based on carboxylic acid salt corrosion inhibitors (carboxylate technology). Free of amines, nitrites, phosphates, borates, and silicates. Effectively protects all modern engines including heavy duty aluminum ones against freezing, corrosion and overheating and prevents scale deposits. Ready to use. Fully compatible with carboxylic coolants meeting requirements of VW TL774-D/F (G12).
Commercial
Commercial Engine Oils LUKOIL AVANTGARDE PROFESSIONAL LS 24 API CI-4 SAE 5W-30 / 10W-40 Approved by: MB-Approval 228.51; MTU Cat. 3.1; SAE 5W-30: MAN M3477/M3271-1; Volvo VDS-3/CNG; Renault RLD / RLD-2 / RGD; Mack EO-N/EO-M Plus; Deutz DQC IV-10LA; SAE 10W-40: Scania LA; Renault RLD / RLD-2 / RXD; Volvo VDS-3; Deutz DQC III-05; MAN M3477; Cummins CES 20078 Licensed: API CI-4 Meets requirements: ACEA E4/E6/E7-08; JASO DH-2 Volume (L): 1, 5, 18, 50, 216.5, 1000 LUKOIL AVANTGARDE PROFESSIONAL LS synthetic oil for diesel engines meets the ACEA E4/E6/ E7-08 and API CI-4 requirements designed according to the manufacturer s recommendations with extended drain intervals. It is intended for use in highly rated modern engines meeting Euro-3, 4 and 5 emission requirements in combination with low sulphur diesel fuel. LUKOIL AVANTGARDE PROFESSIONAL LS low SAPS oil with low level of sulphated ash, phosphorus and sulphur is formulated using highly refined synthetic base stocks and advanced additive technology of foreign production. APPLICATION LUKOIL AVANTGARDE PROFESSIONAL LS is recommended for highly rated diesel engines running under severe conditions, e.g., significantly extended oil drain intervals according to the manufacturer s recommendations. It is suitable for vehicles with particulate filters (DPF), and for most EGR engines and most engines fitted with SCR NOx reduction systems.
Commercial Engine Oils LUKOIL AVANTGARDE PROFESSIONAL API CI-4 (5W-30) / CF (10W-40) SAE 5W-30 / 10W-40 Approved by: MB-Approval 228.5; MAN M3277; MTU Cat. 3; Volvo VDS-3; Renault RLD-2 / RXD; SAE 5W-30: Mack EO-N/EO-M Plus, Deutz DQC IV-10; SAE 10W-40: Scania LDF-3; Deutz DQC III-05 Meets requirements: API CF (SAE 10W-40); ACEA E4/E7-08; ZF TE-ML 04C Volume (L): 1, 5, 18, 50, 216.5, 1000 25 LUKOIL AVANTGARDE PROFESSIONAL synthetic engine oil meets the ACEA E4/E7-08 requirements designed for diesel engines running under severe conditions with extended drain intervals according to the manufacture s recommendations. LUKOIL AVANTGARDE PROFESSIONAL is designed for highly rated diesel engines meeting Euro-3, 4 and 5 emission requirements. LUKOIL AVANTGARDE PROFESSIONAL is formulated using highly refined synthetic base stocks and advanced additive technology of foreign production. APPLICATION LUKOIL AVANTGARDE PROFESSIONAL is recommended for use in heavy-duty four-stroke engines operating under a variety of conditions. It is suitable for most modern engines fitted with turbochargers, EGR and SCR NOx reduction systems. Oil drain intervals according to the manufacturer s recommendations.
Commercial Engine Oils 26 Meets requirements: LUKOIL AVANTGARDE ULTRA API CI-4/SL SAE 5W-40 / 10W-30 / 10W-40 / 15W-40 / 20W-50 Approved by: KAMAZ; YaMZ; SAE 15W-40: MB-Approval 228.3; Cummins CES 20078; MAN M3275; MTU Cat. 2; Renault Trucks RLD-2; Volvo VDS-3; Deutz DQC III-10 Licensed: API CI-4/SL (15W-40) ACEA E7-08, A3/B4-04; SAE 10W-40: Cummins CES 20071/2/6/7/8; MB 228.3; MAN M3275; Volvo VDS-3; Renault Trucks RLD-2/RLD; MTU Cat. 2; Mack EO-M Plus; CAT ECF-1-a / ECF-2; Global DHD-1; SAE 15W-40: Cummins CES 20071/2/6/7; Mack EO-M Plus; CAT ECF-1-a / ECF-2; ZF TE-ML 04, 07C; Global DHD-1; SAE 20W-50: MB 228.3; MAN M3275; MTU Cat. 2 Volume (L): 1, 5, 18, 50, 216.5, 1000
Commercial Engine Oils LUKOIL AVANTGARDE ULTRA LUKOIL AVANTGARDE ULTRA is premium quality engine oil series for turbocharged diesel engines running under severe conditions with extended drain intervals according to the manufacture s recommendations. LUKOIL AVANTGARDE ULTRA are formulated using highly refined mineral and synthetic base stocks and advanced additive technology. These oils provide effective control with respect to piston cleanliness and bore polishing. They further provide excellent wear control, soot handling and lubricant stability. LUKOIL AVANTGARDE ULTRA SAE 5W-40, 10W-30 and 10W-40 viscosity grades are semisynthetic oils providing cold start-up performance. LUKOIL AVANTGARDE ULTRA SAE 20W-50 is specially recommended for vehicles working in hot climate conditions. 27 Application LUKOIL AVANTGARDE ULTRA is recommended for use in natural aspirated and turbocharged heavy-duty four-stroke engines operating under a variety of conditions where extended drain periods are required. It is suitable for most modern engines fitted with EGR and SCR NOx reduction systems. LUKOIL AVANTGARDE ULTRA series meets the API CI-4 service category requirements and applicable for diesel engines where API CI-4, CH-4 and CG-4 oils are recommended. LUKOIL AVANTGARDE ULTRA oils are recommended for highly rated diesel engines meeting Euro-3, 4 and 5 emission requirements and running under severe conditions, e.g., extended oil drain intervals according to the manufacturer s recommendations. It is suitable for engines without particulate filters and for most EGR engines and most engines fitted with SCR NOx reduction systems. LUKOIL AVANTGARDE ULTRA oils are also intended for use in high performance gasoline engines and car & light van direct-injection diesel engines as year-round lubricating oils. These oils are suitable for a mixed fleet.
Commercial Engine Oils LUKOIL AVANTGARDE EXTRA 28 API CH-4/CG-4/SJ SAE 10W-40 / 15W-40 Approved by: KAMAZ; YaMZ; SAE 15W-40: Cummins CES 20077; MAN M3275-1; MTU Cat. 2; Deutz DQC II-10; Volvo VDS-3; MB-Approval 228.3 Licensed: API CH-4/SJ (15W-40) Meets requirements: ACEA E7-08, A3/B4-04; Cummins CES 20071/2; SAE 10W-40: MB 228.1/229.1; Volvo VDS/VDS-2; Mack EO-M Plus Volume (L): 1, 5, 18, 50, 216.5, 1000 LUKOIL AVANTGARDE EXTRA are semi-synthetic (SAE 10W-40) and mineral (SAE 15W-40) multigrade engine oils. Accommodate extended replacement intervals. Recommended for turbocharged gasoline and diesel engines of passenger cars and commercial vehicles. Adopted for operation with low grade fuels. Provide advanced anti-oxidation and dispersancy properties. Provide reliable engine protection against wear, corrosion and formation of high temperature deposits under the most severe operating conditions. LUKOIL AVANTGARDE EXTRA SAE 10W-40 has excellent low temperature properties. Application Recommended for a wide range of European, US and Japanese diesel engines both naturally aspirated and turbocharged operating under all driving conditions, both on- and off-road, as well as for turbocharged gasoline and diesel engines of passenger cars and commercial vehicles. Excellent for heavy duty four-stroke turbocharged diesel engines meeting Euro-3 requirements. Recommended for mixed fleets.
Commercial Engine Oils LUKOIL AVANTGARDE API CF-4/SG SAE 10W-30 / 10W-40 / 15W-40 / 20W-50 Approved by: KAMAZ (SAE 10W-30, 10W-40, 15W-40) Volume (L): 1, 5, 18, 50, 216.5, 1000 LUKOIL AVANTGARDE series consists of high-quality multigrade engine oils for heavy duty applications in on-highway service. LUKOIL AVANTGARDE oils are blended with specifically selected high quality mineral (SAE 15W- 40, 20W-50) and semi-synthetic (SAE 10W-40) base stocks, together with proven additive technology and viscosity index improver, providing high performance and good durability in service. 29 Application LUKOIL AVANTGARDE is recommended for use in diesel or mixed fleet (diesel and gasoline) engine operations in on-highway service. This series is intended for lubrication of heavy-duty diesel engines, naturally aspirated or turbocharged, working under variable conditions and over a wide temperature range whose manufacturers recommend API CF-4 performance level oils in various types of service, including engines used in heavy-duty trucks, construction, mining and farming equipment. LUKOIL AVANTGARDE is formulated with selected technology, also to meet gasoline performance requirements for 1993 and older engines according to the API SG category. This offers storage simplification and cost effective operation for mixed fleet operators.
Commercial Engine Oils LUKOIL DIESEL M-8G2K, M-10G2K API CC SAE 20 / 30 Approved by: KAMAZ Meets requirements: API СС Volume (L): 18, 50, 216.5 30 LUKOIL DIESEL M-8G2K and М-10G2K are improved monograde mineral motor oils for winter and summer operation of road vehicle and tractor diesel engines, respectively. Have high thermal and oxidative stability and high resistance to oxidation. Keep the engine clean during operation. Prevent high temperature deposits on engine surfaces. Extend drain intervals in comparison with M-8G2 and М-10G2 oils, as well as other API CC fluids. APPLICATION LUKOIL DIESEL M8G2K and М10G2K are recommended for high powered, naturally aspirated or moderately supercharged diesel engines of road vehicles and tractors. They are effectively used in engines by KAMAZ, ZIL and other manufacturers.
Commercial Engine Oils LUKOIL DIESEL M-8DM, M-10DM API CD SAE 20 / 30 Approved by: KAMAZ; YaMZ Meets requirements: API CD Volume (L): 18, 50, 216.5 LUKOIL DIESEL M-8-DM, M-10-DM are high quality, mineral motor oils for diesel engines with an advanced additive package, improving deterging, dispersing, antiwear, anticorrosion, and other properties. Have high thermal and oxidative stability and high resistance to oxidation. Keep engine clean during operation. Prevent sludge, varnish, and carbon deposits. 31 APPLICATION LUKOIL DIESEL M-8-DM, M-10-DM are designed for winter and summer operation, respectively, of high powered, turbocharged diesel engines operating under severe conditions. These oils are also used in diesel engines with various power and charge, in different road construction machinery operating under extreme conditions (mine dump trucks, bulldozers, industrial heavy-duty tractors, KAMAZ trucks and similar vehicles, trailer trains, haulers, municipal and intercity buses), as well as diesel generators, manufacturing machinery, and farm tractors, where DM series oils are recommended.
Transmission
Transmission Oils LUKOIL TRANSMISSION TM-5 API GL-5 SAE 75W-90 / 85W-90 / 80W-90 / 80W-140 / 90 / 75W-140 Approved by: AVTOVAZ; ZF TE-ML 16B, 17B, 19B, 21A (SAE 80W-90, 85W-90); GAZ (SAE 85W-90) Meets requirements: MB 235.0, MAN 342 M1, MIL-L2105D (SAE 80W-90) Volume (L): 1, 4, 18, 50, 216.5, 1000 33 LUKOIL TRANSMISSION TM-5 are multigrade gear fluids manufactured using highly refined mineral and innovative synthetic base oils blended with an advanced additive package improving oil performance. Excellent for mechanical transmissions of all types (including hypoid) of passenger cars, commercial vehicles and other machinery operating under the most severe conditions where use of API GL-5 (TM-5) oils is recommended. ADVANCED PERFORMANCE Provide good anti-scuffing, anti-oxidation and anti-corrosion properties during prolonged operation under heavy load and high temperature conditions; SAE 75W-90 viscosity grade oil guarantees stable operation of the transmission at low temperatures, reducing fuel consumption; Provides excellent engine performance through a wide temperature range; Ensures long-life performance.
Transmission Oils LUKOIL TRANSMISSION TM-4 34 API GL-4 SAE 75W-80 / 75W-85 / 75W-90 / 80W-85 / 80W-90 / 80W Approved by: AVTOVAZ (SAE 75W-90); ZF TE-ML 02L; 16K; MAN 341 Type Z4/E3 (SAE 75W-90); ZF TE-ML 02B, 16A, 17A, 19A (SAE 80W-90) Meets requirements: ZF TE-ML 02A, 08, 16A, 17A, 19A (SAE 75W-90); MB 235.1; MAN 341 Z2 (SAE 80W-90) Volume (L): 1, 4, 18, 50, 216.5, 1000 LUKOILTRANSMISSION TM-4 are gear fluids manufactured using highly refined mineral and innovative synthetic base oils blended with advanced additive package improving oil performance. Excellent for mechanical transmissions of all types of passenger cars, commercial vehicles and other machinery where the use of API GL-4 (TM-4) oils is recommended. ADVANCED PERFORMANCE Provide good anti-wear, anti-scuffing, anti-corrosion and anti-oxidation properties; SAE 75W-90 viscosity grade oil guarantees stable operation of the transmission at low temperatures, reducing fuel consumption; Ensures long-life performance.
Transmission Oils LUKOIL TRANSMISSION TM-4/5 API GL-4/5, MT-1 SAE 75W-90 Approved by: ZF TE-ML 02B, 05B, 07A, 08, 12B, 16F, 17B, 19C, MAN 3343 Type S, 341 Type E3 Meets requirements: MB 235.8; ArvinMeritor 076N; MACK GO-J; MIL-L-2105D; MIL-PRF-2105E; SAE J2360; Scania STO 1:0 LUKOILTRANSMISSION TM-4 is a fully synthetic, high efficiency driveline oil for gearboxes and axles of passenger cars and trucks where gear oils of an API GL-4 or API GL-5 (TDL- Total Drive Line) quality are recommended. 35 ADVANCED PERFORMANCE Provides high protection against wear, excellent oxidation and thermal stability, good compatibility with seals, increased drain interval; SAE 75W-90 viscosity grade oil guarantees stable operation of the transmission at low temperatures, reducing fuel consumption.
Transmission Oils LUKOIL ATF Approved by: ZF TE-ML 04D, 14A, 17C; Voith 55.6335; MAN 339 Type Z-1, V-1 Meets requirements: GM Dexron IIIG; MB 236.1, 236.5; Allison C-4; Caterpillar СAT ТО-2 Volume (L): 1, 4, 216.5 36 LUKOIL ATF is a high technology universal automatic transmission fluid designed for both passenger cars & heavy duty applications. LUKOIL ATF possesses friction durability ensuring excellent clutch friction performance. It delivers high viscosity index performance over a wide temperature range, providing low temperature fluidity. LUKOIL ATF offers excellent corrosion and wear protection, good antifoam properties, thermal and oxidation stability. LUKOIL ATF is designed to meet and exceed the requirements of global original equipment manufactures. APPLICATION LUKOIL ATF is recommended for automatic transmission systems of both passenger cars and on- and off-highway trucks where Dexron IIIG products are specified.
Transmission Oils LUKOIL ATF SYNTH ASIA Meets requirements: GM DEXRON TASA, IID/E, IIIG, IIIH; Ford MERCON; JASO M315 Type 1A; Toyota Type T, T-II, T-III, T-IV, Type D-2; Nissan Matic Fluid C, D, J; Mitsubishi SP-II and SP-III; Subaru ATF; Isuzu BESCO ATF-II, ATF-III; Suzuki ATF Oil and ATF Oil Special; Mazda ATF D-III and ATF M-3; Daihatsu Alumix ATF Multi; Honda ATF Z-1 Volume (L): 1, 4, 216.5 LUKOIL ATF SYNTH ASIA is a high quality, universal automatic transmission fluid designed for passenger car applications. This fluid was designed for use in a wide range of Asian automatic transmissions, including ones fitted in European passenger cars, in consideration of the tough demands of leading original equipment manufactures of this region. LUKOIL ATF SYNTH ASIA is recommended for service fill in foreign vehicles during warranty and post warranty periods. Specially designed for Asian passenger cars requirements. Demonstrates stable antifriction properties and smooth shifting without vibration. Possesses excellent thermal oxidative stability and maintains all properties at a high level even in the event of extended drain intervals. Provides extended clutch life. Demonstrates improved lubrication and low temperature fluidity. Optimal viscosity ensures fast response by the electrohydraulic controlling system. LUKOIL ATF SYNTH ASIA possesses low viscosity dependence on temperature (high viscosity index), excellent anti-ageing properties. This fluid has no negative impact on seal materials and does not form a foam. Improved anticorrosion properties reliably protect all equipment components. 37 APPLICATION LUKOIL ATF SYNTH ASIA is recommended for step-type automatic transmissions of passenger cars where JASO products are specified by the manufacturer. It may also be used as a power steering fluid.
Transmission Oils LUKOIL ATF SYNTH HD Approved by: ZF TE-ML 04D, 14B, 16L, 17C; Volvo 97341; Voith 55.6335, MAN 339 Type V-1, Z2; MB-Approval 236.6 Meets requirements: GM Dexron IIIH; Ford MERCON, MERCON V; Allison C-4 Volume (L): 1, 4, 216.5 38 LUKOIL ATF SYNTH HD is a high quality, universal automatic transmission fluid designed for both heavy duty and passenger car applications. This fluid was designed in respect of tough demands of leading world original equipment manufactures and suitable for use at both of conventional and modern types of automatic transmission. LUKOIL ATF SYNTH HD can be used in vehicles from North America and Europe. LUKOIL ATF SYNTH HD is recommended for service filling in foreign and domestic vehicles during warranty and post warranty periods. Possesses significant improvements both in thermal and low temperature performance in comparison with conventional ATF. Provides consistent & smooth power shifting. Provides extended clutch life. Demonstrates improved lubrication and low temperature fluidity. Optimal viscosity ensures fast response of electrohydraulic controlling system. LUKOIL ATF SYNTH HD possesses low viscosity dependence on temperature (high viscosity index) and excellent anti-ageing properties. This fluid has no negative impact on seal materials and does not form a foam. Improved anticorrosion properties reliably protect all equipment components. APPLICATION LUKOIL ATF SYNTH HD is recommended for step-type automatic transmissions of both trucks and passenger cars where Dexron IIIH products are specified as minimal requirements. It may also be used as a power steering fluid.
Transmission Oils LUKOIL GEYSER MM API Meets requirements: CF / CF-2 SAE 10W / 30 / 50 CAT TO-4; Allison C-4; ZF TE-ML 03; Komatsu; API CF, CF-2 LUKOIL GEYSER MM are designed for heavy duty components of off-road vehicles, including axle and final drives, hydraulic systems, friction gear boxes, wet disc brakes, and diesel engines. LUKOIL GEYSER MM multifunctional oils contain special additives, which offer smooth operation of gearbox frictional components, excellent protection against wear, oxidation, corrosion, and foaming. APPLICATION LUKOIL GEYSER MM are used as: - oils for axle and final drives, as well as transmission components of heavy duty applications, including off-road vehicles, where CAT TO-4 oils are required; - oils for hydraulic systems; - motor oils for diesel engines, where API CF-2 and CF fluids are recommended. 39
Transmission Oils LUKOIL TSp-15k SAE 90 Approved by: KAMAZ Meets requirements: API GL-3 (ТМ-3) LUKOIL TSP-15K is gear oil manufactured using mineral base stocks and effective additives improving EP, antiwear, antioxidation properties, foam suppression and low temperature fluidity. Provides high stability during long-term operation. Reliable transmission component performance under high loads and within a wide temperature range. 40 APPLICATION LUKOIL TSP-15K is designed for use as universal multigrade gear oil for KAMAZ gearboxes and axledrives. It is used for spur, bevel and spiral bevel gear sets in transmission systems of tractors, farm, and road construction machinery, requiring API GL-3 (TM-3) oils.
Industrial and Special
Industrial and Special Hydraulic Oils LUKOIL GEYSER ZF 22, 32, 46, 68, 100 (zink-free) Approved by: Denison HF0, HF1, HF2; Cincinnati Machine P-68 / P-69 / P-70; Bosch Rexroth 90220 Meets requirements: DIN 51524 Part 1, 2 (HLP); Eaton Vickers I-286-S, Vickers M-2950-S LUKOIL GEYSER ZF are outstanding hydraulic oils, with an extremely high level of purity, that provide improved anti-wear protection of industrial and automotive hydraulic systems. LUKOIL GEYSER ZF are blended with leading-edge zinc- and chlorine-free additives. Owing to use of modern technologies, they offer exceptional performance and are suitable for ultrafiltration systems with fine filters down to 1-5 micron. They ensure reliable and efficient operation of hydraulic systems, components, and tools under severe operating conditions. 42 APPLICATION LUKOIL GEYSER ZF are used in hydraulic systems and gear drives in industrial, automotive, and marine equipment. PROPERTY LUKOIL GEYSER ZF 22 LUKOIL GEYSER ZF 32 LUKOIL GEYSER ZF 46 LUKOIL GEYSER ZF 64 LUKOIL GEYSER ZF 100 Kinematic viscosity at 40 С, mm 2 /s 19.8-24.2 28.8-35.2 41.4-50.6 61.2-74.8 90.0-110.0 Viscosity Index, min. 110 100 99 92 90 Flash point, COC, С, min. 180 200 205 205 210 Pour point, С, max. -35-30 -25-25 -25 Cleanliness levels: GOST ISO 4406 8-11 13/10 16/13
Industrial and Special Hydraulic Oils LUKOIL GEYSER LT 22, 32, 46, 68, 100 Approved by: Denison HF-0, HF-1, HF-2; Bosch Rexroth 90220; Eaton Vickers I-286-S, M-2950-S Meets requirements: DIN 51524 Part 3 (HVLP); Cincinnati Machine P-68 / P-69 / P-70 LUKOIL GEYSER LT are multigrade hydraulic oils with excellent flow characteristics, especially at low temperatures. LUKOIL GEYSER LT are manufactured using high quality mineral oil and a multipurpose additive package. These oils offer a high level of purity, improved low temperature, antiwear, anticorrosion, and foam suppression properties. LUKOIL GEYSER LT are especially effective in hydraulic systems where only negligible viscosity changes are allowed within a wide range of operating temperatures. APPLICATION LUKOIL GEYSER LT are recommended for use as service fluid in hydraulic systems, including with fine filters down to 1-5 microns. These oils may be used in manufacturing, press, and other industrial equipment, as well as automotive hydraulic systems. 43 PROPERTY LUKOIL GEYSER LT 22 LUKOIL GEYSER LT 32 LUKOIL GEYSER LT 46 LUKOIL GEYSER LT 68 LUKOIL GEYSER LT 100 Kinematic viscosity at 40 С, mm 2 /s 19.8-24.2 28.8-35.2 41.4-50.6 61.2-74.8 90.0-110.0 Viscosity Index, min. 150 160 130 Flash point, COC, С, min. 180 200 205 210 215 Pour point, С, max -51-48 -42-39 -36 Cleanliness levels: GOST ISO 4406 8-11 13/10 16/13
Industrial and Special Hydraulic Oils LUKOIL GEYSER ST 22, 32, 46, 68, 100 Approved by: Denison HF0, HF1, HF2; Cincinnati Machine P-68 / P-69 / P-70; Bosch Rexroth 90220; Danieli; PALFINGER; AVTOVAZ; ARBURG (ST 46); Severstal (ST 32) Meets requirements: DIN 51524 Part 1, 2 (HLP); AFNOR NF E 48-603 (HM); Eaton Vickers I-286-S; JCMAS HK 44 LUKOIL GEYSER ST are industrial hydraulic oils with a high level of refinement, excellent filtrability and air release performance. LUKOIL GEYSER ST are manufactured using mineral oil with a high viscosity index and an advanced additive package. These oils are designed for use in hydraulic equipment, including ultrafiltration systems with a purification degree of from 1 to 5 microns. They are suitable for severe operating conditions and protect equipment against wear and corrosion, offer excellent performance features, extend filter life and oil drain intervals, prevent system failures, and help to reduce operating costs by saving on downtime. LUKOIL GEYSER ST meet the requirements of such customers as Severstal OAO, AVTOVAZ OAO, etc. These oils are designed in close cooperation with leading world producers of additives and hydraulic equipment. APPLICATION LUKOIL GEYSER ST are used in industrial hydraulic systems and drives. PROPERTY LUKOIL GEYSER ST 22 LUKOIL GEYSER ST 32 LUKOIL GEYSER ST 46 LUKOIL GEYSER ST 68 LUKOIL GEYSER ST 100 ISO/DIN HM/HLP HM/HLP HM/HLP HM/HLP HM/HLP Kinematic viscosity at 40 С, mm 2 /s 19.8-24.2 28.8-35.2 41.4-50.6 61.2-74.8 90-110 Viscosity index 110 110 100 100 100 Flash point, COC, С, min 180 200 205 210 215 Pour Point, C, max. -36-30 -27-25 -21 Cleanliness levels: GOST ISO 4406 8-11 13/10 16/13
Industrial and Special Hydraulic Oils LUKOIL IGS 32, 46, 68 Approved by: Denison HF-0; HF-1; HF-2 Meets requirements: DIN 51524 Part 1, 2 (HL, HLP); AFNOR NF E 48-603 (HM); Eaton Vickers I-286-S; Cincinnati Machine P-68 / P-69 / P-70 LUKOIL IGS are industrial hydraulic oils with highly refined mineral base stocks, ensuring high oxidative and thermal stability, anti-wear, anti-corrosion and demulsifying properties, as well as good filterability. LUKOIL IGS are designed in accordance with the requirements of such end users as OAO Volgskiy Trubny Zavod (a Russian giant pipe factory) and OAO AVTOVAZ. APPLICATION LUKOIL IGS are designed for high loaded hydraulic and circulation systems of industrial equipment. These oils offer excellent filterability that ensures reliable performance in modern hydraulic systems with filters down to 10 microns. LUKOIL IGS are compatible with all types of seal and paint coming into regular contact to mineral oils. LUKOIL IGS are not recommended for use with similar zinc-free oils. 45 PROPERTY LUKOIL IGS 32 LUKOIL IGS 46 LUKOIL IGS 68 ISO/DIN HM/HLP HM/HLP HM/HLP Kinematic viscosity, ISO 32 46 68 Kinematic viscosity at 40 C, mm 2 /s 26.0 35.2 41.4 50.6 61.2 74.8 Viscosity Index, min. 95 95 95 Flash point, COC, C, min. 200 210 210 Pour point, C, max. -15-15 -15 Ash, %, max. 0,2 0,2 0,2 Zink, w. %, min. 0,04 0,04 0,04
Industrial and Special Compressor Oils LUKOIL STABIO 46, 68, 100, 150, 220 Meets requirements: DIN 51506 VDL; ISO 6743 LUKOIL STABIO series oils are high quality, mineral compressor oils of viscosity grades including ISO 46, 68, 100, 150, and 220. LUKOIL STABIO series oils are manufactured on the basis of high quality, solvent refined base stocks and a highly effective additive package, ensure good protection against oxidation, wear and corrosion, reduces sludge and deposits in compressor discharge lines. Use of LUKOIL STABIO allows a real reduction in the operating costs of a compressed air production facility by optimising compressor efficiency. 46 APPLICATION LUKOIL STABIO are designed to meet the latest requirements on lubricants for modern oil-filled high power air and/or natural gases compressors, as well as circulation systems. PROPERTY LUKOIL STABIO 46 LUKOIL STABIO 68 LUKOIL STABIO 100 LUKOIL STABIO 150 LUKOIL STABIO 220 ISO Viscosity Grade 46 68 100 150 220 Kinematic viscosity at 40 С, mm 2 /s at 100 С, mm 2 /s 46 6,7 67,4 8,5 Flash point, COC, С 225 235 240 258 260 Pour point, С Four Ball Scar, mm 100 11,4-24 -26 0,30 0,33 150 14,8 220 18,9