ywire Elements Flow Sharing Element Interface IW05 efore use, carefully read the GENERL INSTRUCTIONS FOR USE OF DIRECTIONL CONTROL VLVES
Technical data Nominal flow Nominal pressure 35 l/min - P=8 bar 44 l/min - P=5 bar 9,5 US gpm - P=6 psi,6 US gpm - P=36 psi 50 bar 365 psi Maximum tank pressure 50 bar 75 psi Temperature range -0 C +85 C NR seals (max peak +00 C) -0 C + 30 C HNR seals Internal leakage 40 ± 5 cc/min P Oil viscosity from 5 mm²/s to 90 mm²/s (5 cst to 90 cst) T 0 P Fluid Hydraulic fluids as defined in ISO 6743-4 standard Weight 3.8 kg 8.46 lb T T Interface IW05 Dimensions 46.8 3. 9.4 30.5 5.4 53.09 77.5 3.05 3 0.9 3 0.9 LS P T 50.5.99 80 3.5 X (P ) 0. 4.73. 4.4 49.93 4.6 LS T Y (P ) P P 86. 3.39 60.36 86. 3.39 X - Y = Push type manual override
Characteristic curves Flow curve Metering [l/min] 45 T OIL = 50 C 40 v OIL = mm / s 35 30 5 0 5 0 5 0 40 50 60 70 80 90 00 % [m] Δp = 8 bar PWM = 00 Hz I Max=000 m V (± 0%) I Max=900 m 4V (± 0%) Variation curve of the flow rate of the operating spool of the ΔP [l/min] 48 44 T OIL = 50 C v OIL = mm / s 40 36 3 8 4 4 6 8 0 4 6 p [bar] The spool flow rate is in relation to the pressure margin ΔP given by the difference in pressure on line P and the pressure measured on line LS at the end of the directional valve. The nominal flow of the spools is based on a pressure margin of 8 bar. 3
Characteristic curves Line P head loss per section [bar] 5.0 T 4.5 OIL = 50 C v OIL = mm / s 6a 4.0 3.5 5a 3.0 4a.5 3a.0.5 a.0 a 0.5 0.0 0 5 0 5 0 5 30 35 40 45 50 [l/min] 4
Configurations Two coils, and port side 46.8 3 0.9 3 0.9 30.5 5.4 53.09 77.5 3.05 LS P T 50.5.99 80 3.5 X (P ) 3. 9.4 0. 4.73. 4.4 LS T Y (P ) P P E One coil, port side LS 66.3 6.55 0. 4.73 46..8 LS P X (P ) T T P F One coil, port side LS P 66.3 6.55 54..3. 4.4 LS T Y (P ) T P 5
Configurations Two coils, and port side and emergency lever 3.7.5 5.5 6 99.5 3.9 48.7.9 7 0.67 LS P LS T X (P ) 79.7.0 59.6 6.8 99.3 3.9 60.3.37 (P ) 7 7 (P ) Y (P ) 7.5.86 53.09 T P P C One coil, port side and emergency lever 3.7.5 48.7.9 7 0.67 LS 9.4 8.64 99.3 3.9 5.5 6 99.5 3.9 LS P T X (P ) (P ) 7 7 (P ) 7.5.86 53.09 T P 93.7 3.69 D One coil, port side and emergency lever 3.7.5 48.7.9 7 0.67 LS 3.8 8.4 99.3 3.9 60.3.37 5.5 6 99.5 3.9 LS P T (P ) 7 7 (P ) Y (P ) 7.5.86 53.09 T P 6
Spool type and flow rate 00 Spool type 0 Positions 0 T P P T P T P T 003 Spool type 0 0 T P P T, T P P T Flow rate P = 8 bar Model l/min US gpm 0 5,3 0 0,64 0C 5 6,60 0D 35 9,4 7
Thread Port and Model Type Torque Nm 3/8'' GS ISO 79 40 C M8x.5 ISO 9974 40 W M8x.5 ISO 649 40 E 3/4'' 6 SE ISO 96 50 8
Valve type port V Pilot check valve port 34.34 60.36 49.8.96 LS 4 0.94 6.0 6.5 0.65 X (P ) Y (P ) LS P 0 LS P P T T T V Pilot check valve port LS 57.8.8 5.05 34.34 6.0 4 0.94 X (P ) Y (P ) 6.5 0.65 P 0 T P P T T NE Solenoid operated valve / port 0 4.0 LS 6.5.46 LS X (P ) Y (P ) LS P P P T T T 9
Valve type port NE Solenoid operated valve / port LS 94 3.7 6.5.46 LS X (P ) Y (P ) LS P T P P T T OV Over center port 34.34 MX 4. 4.5 54.3 LS 7.7.09 6.5.04 6.5 0.65 X (P ) Y (P ) LS P LS P P T T T OV Over center port LS 6.44 MX 04. 4. 34.34 6.5.04 7.7.09 X (P ) T Y (P ) 6.5 0.65 LS P LS P P T T 0
Valve type port RC VL Internal pressure limiter and anticavitation cartridge port LS T X (P ) Y (P ) P 0 T T P P RC VL Internal pressure limiter and anticavitation cartridge port LS T X (P ) Y (P ) P 0 T T P P Possible valve combinations port and Port Port NN V NE OV RC NN V NN - None V - Pilot check valve NE - Solenoid operated valve / OV - Over center RC - Internal pressure limiter and anticavitation cartridge NE OV RC
Ordering instructions 3 4 5 6 7 8 9 0 3 4 5 6 7 Configurations Two coils, and port side E One coil, port side F One coil, port side Two coils, and port side and emergency lever C D One coil, port side and emergency lever One coil, port side and emergency lever 3 4 Spool types 00 Spool type 003 Spool type 5 6 Flow rate P = 8 bar 0 5 l/min -.3 US gpm 0 0 l/min -.64 US gpm 0C 5 l/min - 6.60 US gpm 0D 35 l/min - 9.4 US gpm 7 Thread type F Female M Male 8 Thread Port and 3/8'' GS ISO 79 C M8x.5 ISO 9974 W M8x.5 ISO 649 E 3/4'' 6 SE ISO 96 9 0 Port valve type NN None V Pilot check valve NE OV Fan unit / Over center RC Internal pressure limiter and anticavitation cartridge OV-RC valve calibration port NN None 08 03 30 bar 09 04 40 bar 0 05 50 bar 06 60 bar 07 70 bar 3 80 bar 90 bar 00 bar 0 bar 0 bar 30 bar 4 5 6 7 8 9 40 bar 50 bar 60 bar 70 bar 80 bar 90 bar 0 3 4 5 00 bar 0 bar 0 bar 30 bar 40 bar 50 bar 3 4 Port valve type NN None V Pilot check valve NE OV Fan unit / Over center RC Internal pressure limiter and anticavitation cartridge 5 6 OV-RC valve calibration port NN None 08 80 bar 03 30 bar 09 90 bar 04 40 bar 0 00 bar 05 50 bar 0 bar 06 60 bar 0 bar 07 70 bar 3 30 bar 4 40 bar 5 50 bar 6 60 bar 7 70 bar 8 80 bar 9 90 bar 0 00 bar 0 bar 0 bar 3 30 bar 4 40 bar 5 50 bar 7 Voltage and connector V DIN 43650 4V DIN 43650 G V Deutsch H 4V Deutsch
Ordering instructions External coating External coating N None 3