Surface Grinder ESG 618 E 1-500-100 Features: Robust cast iron construction Easy and quick to set up which saves time Precision built for accuracy Mass produced and economically priced Ball bearing ways for superior finish One shot lubrication Ideal for maintenance work Specification ESG 618 E Table Travel 483 x 178mm Working Surface of Table 457 x 152mm Wheel Head Spindle Speeds 2850rpm Spindle Centre from Table 55-385mm Grinding Wheel Dia x Bore 178 x 31.75mm Width of Grinding Wheel 13mm Main Motor 1.5HP Dims. LxWxH (cms) 155 x 110 x 210 Weight 500Kgs 6X18 Manually Operated Splash Guard Machine Light Coolant System 150 x 400mm permenant magnetic Chuck (Key operated) WE RESERVE THE RIGHT TO CHANGE SPECIFICATIONS WITHOUT NOTICE. COPYRIGHT 149
Medium Size Hyd. Surface Grinders ESG 2050 AHR ESG 2050 AHRD ESG 2550 AHR ESG 2550 AHRD ESG 3063 AHR ESG 3063 AHRD ESG 30100 AHR ESG 30100 AHRD ESG 4080 AHR ESG 4080 AHRD ESG 40100 AHR ESG 40100 AHRD 8 x 18 Hyd Automatic Feed Long & Cross, Rapid Up & Down 1-490-100 8 x 18 Hyd Fully Automatic Feed Long, Cross, & Down 1-490-150 10 x 20 Hyd Automatic Feed Long & Cross, Rapid Up & Down 1-490-200 10 x 20 Hyd Fully Automatic Feed Long, Cross & Down 1-490-250 12 x 24 Hyd Automatic Feed Long & Cross, Rapid Up & Down 1-490-300 12 x 24 Hyd Fully Automatic Feed Long, Cross & Down 1-490-350 12 x 40 Hyd Automatic Feed Long, Cross, Rapid Up & Down 1-490-375 12 x 40 HydFully Automatic Feed Long, Cross & Down 1-490-380 16 x 32 Hyd Automatic Feed Long & Cross,Rapid Up & Down 1-490-400 16 x 32 Hyd Fully Automatic Feed Long, Cross & Down 1-490- 16 x 40 Hyd Automatic Feed Long & Cross, Rapid Up & Down 1-490-500 16 x 40 Hyd Fully Automatic Feed Long, Cross & Down 1-490-550 ESG 3060 AHRD Super precision machine provides accuracy & excellent finish Easy and quick to set up which saves time & increases profitability Spindle: Spindle is high precision direct drive, super precision angular contact bearing ensure accurate & vibration free performance. High engineering standards ensure reliability & repeatability Tableways: Longitudinal: one flat & one vee way cross: two vee way Most modern manufacturing techniques are used & machines are produced in large quantities which enables us to market at competitive prices Base: Heavy duty casting for stability Low prices & long working life makes them good value for money. 150 WE RESERVE THE RIGHT TO CHANGE SPECIFICATIONS WITHOUT NOTICE. COPYRIGHT E. & O.E.
Specification ESG 2050 ESG 2550 ESG 3063 ESG 30100 ESG 4080 ESG 40100 AHR/AHRD AHR/AHRD AHR/AHRD AHR/AHRD AHR/AHRD Table Size (WxL) mm 200x460 254x500 305x635 305x1020 406x813 Table Travel (Y, X) mm 238x510 275x560 340x660 340x1130 x930 Vertical Head Travel 400 Max Distance Spindle Centre To Table mm 540 540 Chuck Size mm 200x 250x500 300x 300x1000 400x800 Longitudinal Feeds m/min 5-25 Cross Feed Auto/Stroke mm 0.1-8 Rapid mm/min 990 Manual 0.02mm each graduation / 5mm per revolution of wheel Vertical Feed Wheel Head Auto for AHRD only 0.005, 0.01, 0.02, 0.03, 0.04, 0.05mm/stroke Rapid mm/min 460 Manual 0.005mm each graduation / 1mm per revolution of wheel Grinding Wheel Size mm 200x20x31.75 200x20x31.75 350x40x127 350x40x127 350x40x127 Speed rpm 2850 2850 1 1 1 Spindle Motor Kw 1.5 1. 5 Hydraulic Pump Motor Kw 0.75 0.75 Coolant Pump Motor Kw 0.09 Elevating Motor Kw 0.25 for AHR series / 0.5 for AHRD series Cross Feed Motor Kw 0.04 Total Rated Power Kw 3 3 Maximum table Load Inc chuck Kg 120 125 270 400 500 Dims. LxWxH (cm) 180x150 217x210 235x222 295x222 285x227x x200 x210 220 Weight Kgs 1670 1700 2800 3500 3 AHR/AHRD 406x1020 x1130 ESG 2050 AHR 400x1000 350x40x127 1 295x227 3900 Wheel Balancing Base l Wheel Balancing Arbor l Grinding Wheel l Diamond Dresser l Toolbox & Tools Lo Volt Machine Light l Built in Demagnetiser l Coolant System l Electro Mag Chuck l 200 x mm for ESG 2050 l 250 x 500 for ESG 2550 l 300 x mm for ESG 3063 l 300 x 1000 for ESG 30100 l 400 x 800mm for ESG 4080 l 400 x 1000 for ESG 40100. l l Optional Accessories: Extra Wheel Flange for 8 Wheel Extra Wheel Flange for 14 Wheel Sine Bar 1-490-900 1-490-905 1-490-915 Overhead Wheel Dresser 20/25 Overhead Wheel Dresser 30/40 Dust Suction Coolant 20/25 Dust Suction Coolant 30/40 WE RESERVE THE RIGHT TO CHANGE SPECIFICATIONS WITHOUT NOTICE. COPYRIGHT 1-490-920 1-490-921 1-490-925 1-490-926 151
Large Hydraulic Surface Grinders ESG 50160 NC ESG 60220 NC ESG 80300 NC 1-496-516 1-496-622 1-496-830 NEW Features: Well designed cast iron throughly ribbed structure provides excellent dampening. Grinding spindle features low-maintenance preloaded high precision angular ball bearings. 'V' and flat type guide way which precision hand scraped turcite saddle ways for smooth and long lasting performance. Table guideways are hardened, ground and counter-laminated with PTFE (TEFLON) to ensure high wear-resistance. Centralised auto lubrication system, supplies oil to guide-ways and lead-screws as the machine operates. This system, ensures all the critical components are lubricated with the right amount of oil at all times. Separate hydraulic tank prevents heat and vibration from being transferred to the machine. Electric components and functional modules are well arranged and packed in the electric cabinet, making maintenance and trouble-shooting easily accessible Safety 24V control circuit power PLC + HMI Auto Grind Controller Coolant System Wheel Balancing Arbor Wheel Balancing Stand Wheen Flange & Extractor Grinding Wheel Overhead Parallel Wheeldresser Low Volt Machine Light Electro Magnetic Chucks Built in Magnetic Chuck Built in Demagnetiser Splash Guard Levelling Wedge and Screw Operating Manual Electro Mag Chuck: 500x800mm x 2 pieces for ESG 50160 NC x1000mm x 2 pieces for ESG 60220 NC 800x1000mm x 3 pieces for ESG 80300 NC 152 WE RESERVE THE RIGHT TO CHANGE SPECIFICATIONS WITHOUT NOTICE. COPYRIGHT E. & O.E.
NC Series Easy to setup, roughing, finishing and spark out by HMI & PLC NEW Specifaction ESG 50160 NC ESG 60220 NC ESG 80300 NC Table Size (mm) 500 x 1 x 2200 800 x 3000 Max. Table Travel Longitudinal (mm) 1700 2300 3100 Max Table Travel Cross (mm) 575 675 900 Spindle to Table Surface (mm) 920 Maximum Table Load (Kg) 900 1690 3500 Magnetic Chuck Size (mm) 500x800x2 pieces x1000x2 pieces 800x1000x3 pieces Longitudinal Table Speed m/min 5-25 5-25 5-25 Cross Intermitent Feed mm/t 1-20 1-20 1-30 Cross Feed Rapid mm/min 50-1500 50-1500 50-2000 Cross Feed of MPG mm/div 0.005 0.005 0.005 Auto Downfeed Rate mm/t 0.005, 0.01, 0.005, 0.01, 0.005, 0.01, 0.02, 0.02, 0.03, 0.04 0.02, 0.03, 0.04 0.03, 0.04, 0.05 Rapid Downfeed mm/min 50-500 50-500 50-2000 Vertical Feed of MPG mm/div 0.005 0.005 0.005 Grinding Wheel Speed RPM 1440 1440 960 Grinding Wheel Size mm Ø355x(20-50)Ø127 Ø355x(20-50)Ø127 Ø500x75xØ203 Spindle Motor (Kw) 7.5 7.5 1 Oil Pump Motor (Kw) 3 7.5 Y/Z Servo Motor 2/0.5 2/0.5 3 Packing Dims (LxWxH cm) 564x225x228 635x230x250 820x400x260 Weight (Kg) 0 8000 14000 Optional Accessories: Paper Strip Filter with Magnetic Separator & Coolant System (120i Tank) 1-496-900 Closed Oil Tank Guard 1-496-910 Wheel Flange for 50160 NC/60220 NC 1-496-920 Wheel Flange for ESG 80300 NC 1-496-930 WE RESERVE THE RIGHT TO CHANGE SPECIFICATIONS WITHOUT NOTICE. COPYRIGHT 153