I. PRODUCT INTRODUCTION The wind/solar hybrid controller is control device which can control wind turbine and solar panel at the same time and transform wind and solar energy into electricity then store to the battery bank. Wind/solar hybrid controller is the most important part in off-grid system, whose performance has much effect on life expectancy and operational stability of the whole system, especially the battery expectancy. Or battery service life will be shortened by over-charge or over-discharge. II. SYSTEM DRAWING III. MODEL SPECIFICATION Sample Number 1 2 3 Part 3 refers to the rated battery Part 2 refers to the rated wind voltage specification Part 1 refers to the wind solar hybrid controller turbine voltage 50:wind turbine voltage 5 kw 100:wind turbine voltage 10 kw 48:battery voltage 48V 96:battery voltage 96V 120:battery voltage 120V 200:wind turbine voltage 20 kw 220:battery voltage 220V 240:battery voltage 240V Number 4 5 6 specification Part 4 refers to optional s N: Advanced B: Economic L: Low Voltage Charge D: Buck Voltage Charge S: Micro Current Charge Part 5 refers to Feature 00:Normal; 01:RS232; 02:RS485; XX: other 04:Solar Dumpload Separately 10:Wind Turbine Single Phase DC 11:Wind Turbine Single Phase DC, RS232 DC Output D: DC Output
X: Other 12:Wind Turbine Single Phase DC, RS485 IV. PERFORMANCE FEATURES Superior military-grade components to ensure the product stability. Perfect protection, thus the system has higher reliability. Check and set all operation parameters as requirement from display. Voltage limiting and current-limiting charge mode ensures battery in the best charging status. PWM stepless unload mode, which burn the excess power into dump load, making the battery charging in best status. V. APPLICATION AREAS Stand alone wind/solar hybrid power station; Stand alone domestic household wind/solar hybrid power system. Mobile communication base stations, expressway and other non-residential regions. Coastal islands, remote mountainous, border posts for regions shortage of or without electricity. Government demonstration projects, landscape lighting project. VI. PRODUCTS DISPLAY VII. 5KW TECHNICAL PARAMETERS Product l WWS50-48 WWS50-96 WWS50-120 WWS50-220 WWS50-240 Rated Battery Voltage 48V 96V 120V 220V 240 Rated Wind Turbine Input Power 5kW 5kW 5kW 5kW 5kW Maximum Wind Turbine Input Power 7.5kW 7.5kW 7.5kW 7.5kW 7.5kW Wind Turbine Brake Current 105A 52A 42A 23A 21A Rated Solar Input Power 1.5kW 1.5kW 1.5kW 1.5kW 1.5kW Floating Charging Voltage 58V 116V 145V 266V 290V
Control Box:440 305 170 mm, Dumpload Box:770 390 180 mm (L x W x H) Display Protection Level Ambient temperature Control Box:7.5 kg, Dumpload Box:17 kg anti-reverse-connection protection; wind turbine over rotate speed protection; wind turbine over wind speed protection; wind turbine over voltage protection; wind turbine over current protection; manual brake protection; automatically brake protection; lightning protection. Wind Turbine Start Charge Voltage 8V 20V 20V 40V 40V Input Admittance Value 10/30 5/75 5/75 5/300 5/300 (L x W x H) Control Box:440 305 170 mm, Dumpload Box:410 430 175mm Control Box:8 kg, Dumpload Box:13 kg VIII. 10KW TECHNICAL PARAMETERS Product l WWS100-120 WWS100-220 WWS100-240 Rated battery voltage 120 V 220 V 240V Rated wind turbine input power 10 kw 10 kw 10 kw Maximum wind turbine input power 15 kw 15 kw 15 kw Wind turbine brake current 84 A 46 A 42 A Rated solar input power 3 kw 3 kw 3 kw Floating charge voltage 145 V 266 V 290 Display Protection Function Control Box:440 305 170 mm, Dumpload Box:520 430 675 mm Control Box:9 kg, Dumpload Box:45 kg
Ambient Temperature anti-reverse-connection protection; wind turbine over rotate speed protection; wind turbine over wind speed protection; wind turbine over voltage protection; wind turbine over current protection; manual brake protection; automatically brake protection; lightning protection. Wind turbine start charge voltage 20V 40 V 40 V Input Admittance Value 5/75 5/300 5/300 Control Box:440 305 170 mm, Dumpload Box:520 430 675 mm Control Box:9 kg, Dumpload Box:45 kg IX. 20KW TECHNICAL PARAMETERS Product l WWS200-220 WWS200-240 Rated Battery Voltage 220 V 240V Rated Wind Turbine Input Power 20 kw 20 kw Maximum Wind Turbine Input Power 30 kw 30 kw Wind Turbine Brake Current 91 A 84 A Rated Solar Input Power 6 kw 6 kw Floating Charge Voltage 266 V 290V Display Protection Function Ambient Temperature Control Box:440 305 170 mm, Dumpload Box:680 420 675 mm Control Box:10 kg, Dumpload Box:75 kg anti-reverse-connection protection; wind turbine over rotate speed protection; wind turbine over wind speed protection; wind turbine over voltage protection; wind turbine over current protection; manual brake protection; automatically brake protection; lightning protection.
Wind Turbine Start Charge Voltage 40 V Input Admittance Value 5/300 Control Box:440 305 170 mm, Dumpload Box:680 420 675 mm Control Box:10 kg, Dumpload Box:75 kg X. APPENDIX Optional s Temperature compensation Output dry-contact signal RS communication Wind speed detection Wind turbine low voltage charge Optional Accessories Wind turbine MPPT charging SD card Wind turbine rotate speed detection Wind turbine micro-current charge Ethernet Module Ethernet Module Ethernet Module RS485-USB Converter RS485-USB Converter RS485-USB Converter Friendly reminder: Customers, who will order the wind/solar hybrid controller, need to provide the following information Rated battery voltage Rated battery voltage Rated battery voltage Qualifications Utility model patent of anti-strong-wind, stepless unload wind power controller Utility model patent of wind power boost charge circuit. Utility model patent of SD card document storage New high-tech enterprise certificate Utility model patent for integration of rectification and unload in wind power main circuit board. European CE certification. Software product register certification Declare: Our Company reserves the right to change products. Design and specification are subject to change without prior notice.