LICENCE. to use the European Mark. Licence No Date of issue: Wien,

Similar documents
LICENCE. to use the European Mark. Licence No Date of issue: Wien, Rev. No. 01 Wien,

LICENCE. to use the European Mark

LICENCE. to use the European Mark

to use the European Mark Licence No Date of issue: Wien, Rev. No. 02 Wien,

to use the European Mark Licence No Date of issue: Wien, Rev. No. 02 Wien,

to use the European Mark Licence No Date of issue: Wien, Rev. No. 15 Wien,

Page 1 of 6. Company: France. fuse links. listed in this. (ISO/IEC The manufacturing.

EU Mutual Recognition Technical Requirements

Official Journal of the European Union. (Non-legislative acts) REGULATIONS

TEST REPORT IEC Plugs and socket-outlets for household and similar purposes Part 1: General requirements

The product and any acceptable variation thereto is specified in the Annex to this certificate and the documents therein referred to.

ECOMP.3.A EUROPEAN UNION. Brussels, 12 December 2018 (OR. en) 2018/0220 (COD) PE-CONS 67/18 ENT 229 MI 914 ENV 837 AGRI 596 PREP-BXT 58 CODEC 2164

ECOdrive 56x/A/B/S, DUALdrive 560/S, SOLOdrive 56x/A/B/S

Official Journal of the European Communities

KBA Kraftfahrt-Bundesamt

SOUTH AFRICAN NATIONAL STANDARD

Überwachte Fertigungsstätte

EEA AGREEMENT - ANNEX XIII p. 99 APPENDIX 2 { 1 }

Requirements on Minimum Energy Performance Standard and Energy Efficiency Rating Labelling and Inspection of Air Compressors (draft)

SGS Australia Pty Ltd

COMMISSION REGULATION (EU) No /.. of XXX

* * * Brussels, 20th October 2012

Deutsche Akkreditierungsstelle GmbH

DEPARTMENT OF TRADE AND INDUSTRY NO APRIL 2016

Implementation procedure for certification and continued airworthiness of Beriev Be-200E and Be-200ES-E

Revision 1. Incorporating all valid text up to: Supplement 5 to the original version of the Regulation Date of entry into force: 7 December 2002

Tillers Motor hoes (combustion engine powered)

Approval of SITEMA Safety Catchers for use as a mechanical restraint device in presses.

The product and any acceptable variation thereto is specified in the Annex to this certificate and the documents therein referred to.

(Text with EEA relevance)

Hedge trimmers (combustion engine powered)

Vehicle Importer Terms and Agreement Form

:JET A)

Chain-saws (combustion engine powered)

FL ballasts Electronic fixed output. PC BASIC sl, 4 28 W PC BASIC

A brief guide for identification of non-compliant construction machinery. Is this. Compactor / Roller compliant with European legislation?

Approval certificate. Certificato di approvazione CA IGUZZINI ILLUMINAZIONE SPA VIA MARIANO GUZZINI RECANATI MC IT - Italy

Single market, implementation and legislation for consumer goods Automotive industry

Operating Instructions

E/ECE/324/Add.5/Rev.6/Amend.2 E/ECE/TRANS/505/Add.5/Rev.6/Amend.2

Eurocode 3 Design of steel structures

for the use of SIQ Type Approved certification mark 51-SIQ BG 004/130 Project file: C DIN Rail Power Supply

IBExU Institut für Sicherheitstechnik GmbH

Approval certificate. Certificato di approvazione CA IGUZZINI ILLUMINAZIONE SPA VIA MARIANO GUZZINI RECANATI MC IT - Italy

LICENCE CEBEC B, E LAC. No Issued to: Applicant: Licensee:

Proposal for a DIRECTIVE OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL

Decree of the Ministry of Transport and Communications

LICENCE CEBEC B E LAC. Issued to: Applicant: Siemens AG Low Voltage Siemensstrasse 10 D REGENSBURG Germany

Revised mandate to CEN for standardization in the field of recreational craft.

EC-CERTIFICATE OF CONFORMITY 0432 CPD 0031

FL ballasts Electronic fixed output PC BASIC, 4 28 W PC BASIC

This standard covers the requirements of lighting chains. This standard covers only the safety requirements.

Annex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005

Electric Power Supply (Power) APPLICATION FORM

Approval certificate. Certificato di approvazione CA IGUZZINI ILLUMINAZIONE SPA VIA MARIANO GUZZINI RECANATI MC IT - Italy

TOPAS 2130A (Draft v3)

for the use of SIQ Type Approved certification mark Sl-SIQ BG 004/081 Project file: C DIN Rail Power Supply

Ride-on lawnmowers (combustion engine powered)

Test specification : EN71 - Part1: Mechanical and Physical Properties Excluding Clause 7.1 Excluding Labeling Requirement of Clause

Version / Status V 2.0 Date Author. Wagon Markings

Fact Sheet on the sale of electrical and electronic equipment

VIETNAM NATIONAL STANDARDS AND LABELING REQUIREMENTS

QTP-M 2X Product datasheet. QUICKTRONIC-M ECG for circular FL 16 mm

Annex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005

DEUTSCHE NORM DIN EN 10080

Approval certificate. Certificato di approvazione CA IGUZZINI ILLUMINAZIONE SPA VIA MARIANO GUZZINI RECANATI MC IT - Italy

Eurocode 3 Design of steel structures

Annex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005

CertRom. BUCHAREST, S5 Calea 13 Septembrie 231A; Ph: , Fax: ;

Approval certificate. Certificato di approvazione CA IGUZZINI ILLUMINAZIONE SPA VIA MARIANO GUZZINI RECANATI MC IT - Italy

F5 565 Rear-view mirrors (ENTR/2004/1340)

SPECIFICATION SHEET ORION ROAD LANTERN. IP66 RATED CRI. 230v /50hz

Leuchtmittel und Zubehör

VOLUNTARY CODE OF PRACTICE FOR ELECTROMAGNETIC COMPATIBILITY (EMC) OF MOTOR VEHICLES (13 October 2014)

Eurocode 2 Design of concrete structures

IGUZZINI ILLUMINAZIONE SPA VIA MARIANO GUZZINI RECANATI MC IT - Italy

東莞永力電業有限公司 YUNG LI CO., LTD. Da Pu Industrial Zone, Gang Zi, Changping Town, Dong Guan City, Guangdong China.P.R.

Information Sheet. concerning the Issuing of Multi-stage Typeapprovals in accordance with Directive 2007/46/EC (MMT) Version: March 2016.

COMMISSION REGULATION (EU)

CELMA Guide for the application of the Commission Regulation (EC) No. 245/2009 on Tertiary lighting sector products

Siovenski institut za kakovost in meroslovje Siovenian Institute of Quality and Metrology. Number. SI-ENEC 030/006 Ml. Product and type(s) / model(s)

Eurocode 1 Actions on structures

Installation Instructions for direct line voltage connection / Basic / SubstiTUBE Value Advanced ST8-HV / ST8-HB / ST8-HA

ANNEX MOTOR VEHICLES AND MOTOR VEHICLES' PARTS. Article 1. General Provisions

SOUTH AFRICAN NATIONAL STANDARD

Eurocode 3 Design of steel structures

E/ECE/324/Rev.2/Add.102/Rev.1 E/ECE/TRANS/505/Rev.2/Add.102/Rev.1

EU-Mexico Free Trade Agreement EU TEXTUAL PROPOSAL

METALLIC MATERIALS - CONVERSION OF HARDNESS VALUES (ISO 18265:2003) IRISH STANDARD I.S. EN ISO 18265:2003. Price Code

Leading the way in hazardous areas Features EATON

COMMISSION RECOMMENDATION. of XXX

Test report no

SKN_N0106AnnexJ_R2. Annex J - Specific requirements for PVT collector Certification. 1. Introduction and definition

DVGW Prüflaboratorium Gas DBI Gastechnologisches Institut ggmbh FREIBERG

TYPE APPROVAL CERTIFICATE

NSAI Licensed Adaptor Scheme. Guidance Document for. Individual Vehicle Approval (IVA)

Sound-absorbing spacer Sorp10

Approval mark PL HCR 1a A

Airworthiness Directive

Confirmation: / 22 March 2013

Transcription:

OVE Austrian Electrotechnical Association 1010 Wien, Eschenbachgasse 9, Austria ZVR: 327279890 DVR: 1055887 www.ove.at OVE Testing & Certification 1190 Wien, Kahlenberger Str. 2A, Austria T +43 1 370 58 06 F +43 1 370 58 06-199 ENEC Certification Body registered under ID # 11. Validity of ENEC Licences can be checked at www.enec.com LICENCE to use the European Mark Licence No. 80145-007 Date of issue: OVE the Austrian Electrotechnical Association as signatory to the "Agreement on the use of a commonly agreed Mark of Conformity for certain electrical equipment complying with European Standards" hereby grants the right to label the products mentioned hereunder and listed in the Annex with the Mark(s) shown above to the following company Licenceholder: Schréder SA Rue de Lusambo 67 1190 Brussels Belgium Product: Luminaires for road and street lighting Trade Mark: Series/Type: Series SKIDO Basis for this given right is the conformity of the products with the requirements of the relevant Standard(s) as listed in the Annex and the fulfilment of articles 8 and 9 of the ENEC-Agreement by the manufacturer. This licence refers to the tested specimen and to all products manufactured strictly identical to the submitted one. This licence has been issued under the presumption and conditional on the fact that the licensee holds all necessary legal rights with regard to the product presented for testing and certification. Austrian Electrotechnical Association Head of Testing & Certification Dipl.-Ing. W. Martin OVE Testing & Certification Accredited by the Federal Ministry of Science, Research and Economy as Certification Body for products within the scope as given in the official decree and published under www.en.bmwfw.gv.at/accreditation

Page 1/4 Hersteller Manufacturer Fertigungsstätte(n) Factory location(s) Tungsram-Schréder Világítási Berendezések Zrt Tópart 2. 2084 Pilisszentiván Hungary TOV Schréder Mukylunetska 46B 46005 Ternopil Ukraine Typenbezeichnung Type reference Series SKIDO SKID 6L_700mA CW.. SKID 6L_1050mA CW.. Prüfbericht Test Report Nationale Bestimmung(en) National Standard(s) Europanorm(en) European Standard(s) TGM-VA EE 36464 ECS ÖVE/ÖNORM EN 60598-1:2015-11-01 ÖVE/ÖNORM EN 60598-2-3:2012-01-01 EN 60598-1:2015 EN 60598-2-3:2003 + A1:2011 Ersatz für Zertifikat Superseded licence -- Anmerkung(en) Remark(s) --

Page 2/4 Nennspannung Rated voltage Anzahl und Leistung der Lampen Rated wattage and number of lamps Lampentyp(en) Lamp identification Schutzgrad Degree of protection AC 100-240 V 1 x 17/23 W LED Modules IP 65; IK 08 50/60 Hz Netzanschluß Supply connection Befestigungsfläche Supporting surface Schutzklasse Class of protection Beschreibung des Aufbaus Description of construction Zusatzinformation Additional information Screw terminals Normally flammable surface Cl. I Luminaires for road and street lighting made of aluminium for installation on a pipe or on a mast arm, with LED module and LED driver. Protector made of polycarbonate. LED-Modules tested according to EN 62471:2008 and found within limits of risk group 2 (moderate risk). Distance d = 200mm: RG2 Distance d 1,27m: RG1 Distance d = 2m (500 Lux): RG0

Page 3/4 Bauteil Code Hersteller Typenbezeichnung Konformitätszeichen Component Code Manufacturer Type Reference Mark(s) of conformity LED Converter B B Mean Well Enterprises Mean Well Enterprises PLD-25-1050 ENEC 17 PLD-16-700 ENEC 17 Fuse holder B Adels-Contact 503 SI VDE Fuse A Littelfuse.800; 250V; T 800mA VDE Varistor A Littelfuse V275LA40AP (P275L40) VDE Terminals A Adels-Contact 500 ; 450V; 0,75-2,5mm² VDE LED-Module C Zollner 00-16-725 (Nichia 219C CW) TGM-VA EE 36464 SFT-2 Wiring A Helukabel H05VV-F 3G1,5mm² VDE A B C D The component is replaceable with another one, also certified, with equivalent characteristics. The component is replaceable if authorised by the test house. Integrated component tested together with the appliance. Alternative component.

Type list Page 4/4 Type Input current at 230V 50Hz [A] Luminaire max. power [W] LED Current [ma] SKIDO SKID 6L_700mA CW.. SKIDO SKID 6L_1050mA CW.. 0,07 15 700 0,10 23 1050