Poppet Valves 750 Series
ontents Section Page Introduction 750 Series Poppet Valve Pilot operated 4 /4 to / Pilot operated 5 /4 to Pilot operated 6 Pilot operated 7 /4 to / Pilot solenoid operated 8 /4 to Pilot solenoid operated 0 Solenoid operators for use with pilot solenoid poppet valves Pilot solenoid operated solenoid specifications Plunger or roller lever operated 4 / Plunger operated spring-return 5 Rotork is the global market leader in valve automation and flow control. Our products and services are helping organisations around the world to improve efficiency, assure safety and protect the environment. We strive always for technical excellence, innovation and the highest quality standards in everything we do. As a result, our people and products remain at the forefront of flow control technology. Uncompromising reliability is a feature of our entire product range, from our flagship electric actuator range through to our pneumatic, hydraulic and electro-hydraulic actuators, as well as instruments, gearboxes and valve accessories. Rotork is committed to providing first class support to each client throughout the whole life of their plant, from initial site surveys to installation, maintenance, audits and repair. From our network of national and international offices, our engineers work around the clock to maintain our position of trust. Rotork. Keeping the world flowing. Poppet Valves
Introduction A range of / pilot operated poppet valves in stainless steel 6L for use on gases. Specifically designed for harsh environments, designed for actuator control. Rotork Midlands' 750 series is available in /4 to NPT port sizes. 6L construction makes this valve range ideal for severe service / hazardous environments. / function for cylinder or actuator control incorporating: Low power consumption Low temperature options High flow rates Relevant industry approvals including SIL Sweet (natural) and sour gases as well as low pressure hydraulic, mineral or water Hazardous protection concepts Keeping the World Flowing
750 Series Poppet Valve Pilot operated A range of / pilot operated poppet valves in stainless steel 6L for use on gases. Features and enefits Specifically designed for severe environments 6L stainless steel construction Designed for actuator control Large flow paths (up to 0 v) NAE capability option available Media & Ambient Temperature Range /4 to / " -0 to +80 (-4 to +56 F) & " -0 to + 80 (-4 to +76 F) Low temperature version (all sizes up to and including ") -50 to +80 (-58 to +76 F) Note: When product is ordered as /ATEX ambient temperature is limited to +40 (04 F) Ex IIGc T6. Working Pressure Up to bar (74 psi) maximum inlet pressure Minimum pilot pressure valve size dependent. Ports NPT (SP option available) /4 to NPT Pilot ports /8 or /4 (valve size dependent) Operating Media Gases filtered lubricated or non lubricated air, inert gas, sweet (natural) and sour gases Liquids low pressure hydraulic, mineral oil or water (please consult factory) NOTE: To prevent freezing of the condensate within the product, the media dew point must be at least 0 below the lowest ambient temperature the product will be exposed to. onstruction Materials ody & trim: 6L stainless steel Springs: 6 stainless steel Drawings and D models for all valves and solenoid options available on request Seals: /4 to / fluoroelastomer (standard option) /4 to nitrile (standard option) /4 to " EPDM (low temperature version) The use of lubrication upstream of the product is not recommended for low temperature applications. Size Mass (kg) Max. Flow L/Min Max. Flow SFM Min. Pilot Pressure v /4 0.65 6 4 4.0 bar. /8 0.9 809 64 4.0 bar.8 /.5 58 4 4.0 bar.5 /4 5 804 84 4.0 bar 8 5 866 454 4.0 bar /4 7650 64 4.0 bar 8 / 767 804 4.0 bar 8.7 5086 797 4.0 bar 50 Maximum flow at 6 bar, with bar differential Minimum pilot pressure at 6. bar body pressure ertification Options Available ATEX 4 Poppet Valves
750 Series Poppet Valve /4 to / Pilot operated A E D Ports J NPT Pilot Port K NPT OUTLET Mounting Holes ØN L F G H EXH (N/) INLET (N/O) M INLET (N/) EXH (N/O) Dimensions (mm) Size A D E F G H J K L M N /4 9 44.5 7 54 0 6 /4 /8 5 8 5.5 /8 9 5 7 54 0 8 /8 /8 40 8 6.5 / 5 6.5 8 8.5 65 8 45 / /8 50 6 6.5 / Normally / Diverter losed / Normally / hangeover Open Keeping the World Flowing 5
750 Series Poppet Valve /4 to Pilot operated A E D L L Ports H NPT Pilot Port J NPT F G Outlet Mounting Hole ØM K EXH (N/) INLET (N/O) INLET (N/) EXH (N/O) Dimensions (mm) Size A D E F G H J K L M /4 0 96 6.5 6.5 5 06 /4 /4 0 0 96 6.5 6.5 6 6 /4 5 /4 65 6 76 76 90 80 8 /4 /4 8.5 50 / 65 6 76 76 90 80 8 / /4 8.5 50 9 40 0 0 0 40 /4 8 6 6 Poppet Valves
750 Series Poppet Valve Pilot operated 46 70 0 0 70 40 40 - NPT Line Ports Outlet 4 Mounting Holes Ø.0 ¼ NPT Pilot Port 75 85 Exhaust (N/) Inlet (N/O) Inlet (N/) Exhaust (N/O) 5 5 5 Optional Mounting rackets Dimensions (mm) Drawings and D models for all valves and solenoid options available on request Size Mass (kg) Max. Flow L/Min Max. Flow SFM Min. Pilot Pressure v 0 894 954 See below 0 (90 offset ports) Low temperature version not available in. If alternative port positions are required consult factory. See examples below. Alternative Port Positions Pilot Pressures for Poppet Valve Line Pressure (bar) Pilot Pressure (bar).4. 4.4 5.6 6 4. Line Pressure (bar) Pilot Pressure (bar) 7 5 8 5.6 9 6. 0 6.6 7. 7.6 oding hart Size Ports Positions Type Function Operator L/H Operator R/H ody/seal Material Style Port Type Port Style Approval Approval /4 /8 4 / 5 N/ & N/O M Mono Stable Spring Air E Steel / Low Temp SP NPT ody Ported /ATEX II G c T6 w/o option /NAE NAE w/o option 6 /4 8 5 /4 S Steel / Nitrile 7 / 9 V Steel / FKM 5 M - Alternative port positions available for option - consult Rotork Midland Low temperature option not available in ATEX Directive 04/4/EU (Non-electrical Atex) Keeping the World Flowing 7
750 Series Poppet Valve /4 to / Pilot solenoid operated A range of / pilot solenoid operated poppet valves in stainless steel 6L for use on gases. K-TYPE solenoid shown - see solenoid specification chart Features and enefits Specifically designed for severe environments 6L stainless steel construction Designed for actuator control Large flow paths (up to 0 v) NAE capability option available Media & Ambient Temperature Range Please refer to solenoid selection chart on page. Working Pressure Up to bar (74 psi) maximum inlet pressure Minimum pilot pressure valve size dependent Ports NPT (SP option available) /4 to / NPT Pilot ports /8 Operating Media Gases filtered lubricated or non-lubricated air, inert gas, sweet (natural) and sour gases - NAE Liquids low pressure hydraulic, mineral oil or water (please consult factory) NOTE: To prevent freezing of the condensate within the product, the media dew point must be at least 0 below the lowest ambient temperature the product will be exposed to. onstruction Materials ody & trim: 6L stainless steel Springs: 6 stainless steel Seals: /4 to / fluoroelastomer EPDM (low temperature version) /4, /8 and / pilot solenoid poppet valves have internal feed to solenoid, therefore can only be used / normally closed, if normally open or separate pilot supply is required please consult factory The use of lubrication upstream of the product is not recommended for low temperature applications. Drawings and D models for all valves and solenoid options available on request Size Mass (kg) Maximum Flow at 6 bar, with bar differential Minimum Pilot Pressure at 6. bar body pressure Max.Flow L/Min Max.Flow SFM Operating Pressure v /4 0.65 +solenoid 6 4 to bar. /8 0.9 +solenoid 809 64 to bar.8 /.5 +solenoid 400 4 to bar.5 Internal Feed to Solenoid / N/ ertification Options Available UL x ATEX 8 Poppet Valves
750 Series Poppet Valve /4 to / Pilot solenoid operated M0 x.5 able Entry D AS E G F Ports M NPT A - ØK Mounting Holes H Outlet Port Dimensions (mm) J Size A D E F G H J K L M /4 44.5 4 7 54 0 6 5 5.5 8 /4 /8 5 4 7 54 0 8 40 6.5 8 /8 / 6 6.5 8 50.5 65 8 45 50 6.5 6 / Inlet Port L Exhaust Port * Denotes solenoid type. See page - # Denotes Voltage. See page oding hart Size Ports Positions Type Function Operator L/H Operator R/H ody/seal Material Style Port Type Port Style Solenoid Type Voltage Approval 4 Approval /4 /8 4 / N/ 4 N/O 5 N/ N/O M Mono Stable Spring Solenoid 4 Solenoid Separate Supply E S V Steel / Low Temp Steel / Nitrile Steel / FKM SP NPT ody Ported K 7 L P T 4 Exd II T6 Exd II T4 Nema 7 & 9 Eex me II T4/T5 Eex ia II T6 Non- Haz D F M S Y VD 4 VD 48 VD 0 VA 50/60Hz 0 VA 50Hz 8 VD /ATEX II G c T6 w/o option /NAE NAE w/o option M For solenoid details see page T type solenoid only available in 8 VD (Y) When selecting Type 5 (N, NO) the R/H Operator must be 4 - Solenoid Separate Supply 4 ATEX Directive 04/4/EU (Non-electrical Atex) NOTE: The combination of the valve and the coil will determine maximum ambient i.e. always the lower of the two. Keeping the World Flowing 9
750 Series Poppet Valve /4 to Pilot solenoid operated A range of / pilot solenoid operated poppet valves in stainless steel for use on gases. K-TYPE solenoid shown - see solenoid specification chart Features and enefits Specifically designed for severe environments 6L stainless steel construction Designed for actuator control Large flow paths (up to 0 v) NAE capability option available Media & Ambient Temperature Range Please refer to solenoid selection chart on page. Working Pressure Up to bar (74 psi) maximum inlet pressure Minimum pilot pressure via solenoid supply port (valve size dependent - see chart) Ports NPT (SP option available) /4 to NPT Pilot Ports /8 or /4 (valve size dependent) Operating Media Gases filtered lubricated or non-lubricated air, inert gas, sweet (natural) and sour gases - NAE Liquids low pressure hydraulic, mineral oil or water (please consult factory) NOTE: To prevent freezing of the condensate within the product, the media dew point must be at least 0 below the lowest ambient temperature the product will be exposed to. onstruction Materials ody and trim: 6L stainless steel Springs: 6 stainless steel Seals: /4 to Nitrile EPDM (low temperature version) The use of lubrication upstream of the product is not recommended for low temperature applications. Drawings and D models for all valves and solenoid options available on request Size Mass (kg) Max.Flow L/Min Max.Flow SFM Minimum Solenoid Supply Pressure /4 5 +solenoid 804 84 4 bar 8 5 +solenoid 866 454 4 bar /4 +solenoid 7650 64 4 bar 8 / +solenoid 79 79 4 bar 8.7 +solenoid 50869 798 4 bar 50 0 +solenoid 895 955 See table on page 7 0 v Maximum Flow at 6 bar, with bar differential Separate Supply to solenoid / Normally / Diverter losed ertification Options Available UL x ATEX / Normally / hangeover Open 0 Poppet Valves
H 750 Series Poppet Valve /4 to Pilot solenoid operated /4 to version D F A G AS Solenoid Supply Port N NPT SQ Ports M NPT E Outlet Port ØK Mounting Hole M0 x.5 able Entry Dimensions (mm) J Size A D E F G /4 4 96 6.5 5 06 7 Inlet N/ Port Outlet N/O Port () L Inlet N/O Port () Outlet N/ Port 4 96 6.5 6 6 7 /4 85 6 76 8 90 80 7 / 85 6 76 8 90 80 7 " version D E A H AS " 78 40 0 0 40 86 55 70 40 40 90 46 5 SQ J 4- ØK Mounting Holes Valve Only L F G Size H J K L M N /4 60 /4 /4 70 /4 /4 8.5 00 /4 /4 / 8.5 00 / /4 " 4 8 4 /4 75 40 / If alternative port positions are required consult factory. oding hart Size Ports Positions Type Function Operator L/H Operator R/H ody/seal Material Style Port Type Port Style Solenoid Type Voltage Approval Approval 6 /4 8 5 /4 7 / 9 5 N/ & NO M Mono Stable Spring 4 Solenoid Separate Supply E S V Steel / Low Temp Steel / Nitrile Steel / FKM SP NPT ody Ported K 7 L P T 4 Exd II T6 Exd II T4 Nema 7 & 9 Eex me II T4/T5 Eex ia II T6 Non- Haz D F M S Y VD 4 VD 48 VD 0 VA 50/60Hz 0 VA 50Hz 8 VD /ATEX II G c T6 w/o option /NAE NAE w/o option 5 M 4 For solenoid details see page T type solenoid only available in 8 VD (Y) ATEX Directive 04/4/EU (Non-electrical Atex) NOTE: The combination of the valve and the coil will determine maximum ambient i.e. always the lower of the two. Keeping the World Flowing
750 Series Poppet Valve Solenoid operators for use with pilot solenoid poppet valves Solenoid ode K&7 Solenoid ode L Ø77 9 M0 X.5 able Entry / NPT able Entry 9 40 8.5 /4 - UN M0 X.0 Ø6.5 58 5 Solenoid ode P&T Solenoid ode 4 R 5 80.5 58.0 M0 X.5 able Entry 9.5 5 Pg9 able Entry 60 7 57.5 6 M0 X.0 DIN 4650 PLUG Voltages ode Voltage VD D 4 VD F 48 VD M 0 VA 50/60 Hz S 0 VA 50 Hz Y 8 VD Poppet Valves
750 Series Poppet Valve Pilot solenoid operated Solenoid specifications Model ode K 7 L P T 4 Type of Protection Exd II T6 Exd II T4 NEMA 7 & 9 Eex me II T4/T5 Eex ia II T6 Non-hazardous Approved Area Zones and Zones and lass I, Div, Group & D. lass II, Div, Groups E, F, & G. lass II, Div, Groups, D, E, F & G Zones and Zones 0 None Degree of Protection IP67 (NEMA Equivalent: 6) IP67 (NEMA Equivalent: 6) NEMA 4 (IP55) IP66 (NEMA Equivalent: 4X) IP66 (NEMA Equivalent: 4X) IP65 (NEMA Equivalent: 4) Housing 6 Steel alt Aluminium Epoxy coated 6 Steel alt Aluminium Epoxy coated Steel. oil potted Glass reinforced Polyamid ( Steel conduit hub) Glass reinforced Polyamid Moulded plastic able Entry M0 x.5 (Optional /" NPT consult factory for code) M0 x.5 (Optional /" NPT consult factory for code) /" NPT or 4" flying lead M0 x.5 M0 x.5 DIN plug Power onsumption A/D 5W.4 VA (0 VA).4 VA (0 VA) 5 W.4 VA (0 VA).4 VA (0 VA).8 W /.8 W 7.5 W (D). W (4 VD) 9 W (D) 9 W (Inrush VA) (A) Maximum Admissable Surface Temp 85 º (85 ºF) 5 º (75 ºF) 60 º (0 ºF) T4 5 º (75 ºF) T5 00 º ( ºF) 85 º (85 ºF) N/A Maximum Ambient Temperature 40 º (04 ºF) 80 º (76 ºF) 40 º (04 ºF) T4 75 º (67 ºF) T5 40 º (04 ºF) 65 º (49 ºF) 50 º ( ºF) Maximum Fluid Temperature 40 º (04 ºF) 80 º (76 ºF) 05 º ( ºF) T4 75 º (67 ºF) T5 40 º (04 ºF) 75 º (67 ºF) 75 º (67 ºF) Maximum Working Pressure (ar) Solenoid Weight (kg) 8.5.6.6 0.9 0.6 0.5 0.0 Approved Standard ATEX, SA, UL, IEEX & EA ATEX, SA, UL, IEEX & EA UL Listed / SA ertified ATEX, IEEX ATEX, IEEX NOTES: T type solenoid only available with 8 VD coil (Y). Keeping the World Flowing
750 Series Poppet Valve Plunger or roller lever operated A range of / mechanically operated poppet valves for cylinder position detection in stainless steel 6L for use on gases. Features and enefits Specifically designed for severe environments 6L stainless steel construction Mechanically operated Limit switch for end of actuator stroke detection NAE capability option available Media & Ambient Temperature Range -0 to + 80 (-4 to +76 F) Note: When product is ordered as /ATEX ambient temperature is limited to +40 (04 F) Ex IIGc T6. Working Pressure Up to bar (45 psi) maximum inlet pressure Maximum Flow 40 l/min (4. SFM) (at 6.0 bar with.0 bar differential) Ports NPT (SP option available) /8 NPT Operating Media Gases filtered lubricated or non-lubricated air, inert gas, sweet (natural) and sour gases Liquids low pressure hydraulic, mineral oil or water (please consult factory) NOTE: To prevent freezing of the condensate within the product, the media dew point must be at least 0 below the lowest ambient temperature the product will be exposed to. onstruction Materials ody and trim: 6L stainless steel Springs: 6 stainless steel Seals: Nitrile Drawings and D models for all valves and solenoid options available on request Size Description Mass (kg) Operating Force N lbf v /8 Plunger operated, spring-return, N/ 0. 44 9.9 0.6 /8 Plunger operated, spring-return, N/O 0. 80 8 0.6 /8 Lever roller operated, spring-return, N/ 0.8 0 4.5 0.6 /8 Lever roller operated, spring-return, N/O 0.9 6 8. 0.6 /8 Plunger Operated Spring Return N/ /8 Roller Lever Operated Spring Return N/ ertification options available /8 Plunger Operated Spring Return N/O /8 Roller Lever Operated Spring Return N/O ATEX 4 Poppet Valves
750 Series Poppet Valve / Plunger operated spring-return / Plunger operated spring-return 4 5 Total Travel.5 To Operate M4 X 0 DEEP Ø4. THRU EXH (N/) INLET (N/O) 6 EXH OUTLET 4 44 6 INLET (N/) EXH (N/O) INLET 6 / Roller lever operated spring-return Ø0 Total Travel 6 To Operate 77.5 9.0 - /8 Line Ports Ø5 5.75. 6 5 oding hart Additional Options Size Ports Positions Type Function Operator L/H Operator R/H ody/seal Material Style Port Type Port Style Approval Approval /8 N/ 4 N/O M Mono Stable 6 Mechanical Plunger 8 Lever Roller Air S V Steel / Nitrile Steel / FKM M SP NPT ody Ported /ATEX II G c T6 w/o option /NAE NAE w/o option M - M Keeping the World Flowing 5
www.rotork.com A full listing of our worldwide sales and service network is available on our website. Rotork Midland Ltd. Patrick Gregory Road Wolverhampton WV DZ, UK tel +44 (0)90 05 678 email sales.midland@rotork.com Rotork is a corporate member of the Institute of Asset Management PU7-006-00 Issue 0/9 As part of a process of on-going product development, Rotork reserves the right to amend and change specifications without prior notice. Published data may be subject to change. For the very latest version release, visit our website at www.rotork.com The name Rotork is a registered trademark. Rotork recognises all registered trademarks. Published and produced in the UK by Rotork. Registered office: Rotork plc, rassmill Lane, ath, A JQ, UK. POWTG09