Recessed Architectural Floodlighting A new generation of low temperature luminaires suitable for a wide range applications
Thorn s recessed architectural floodlighting luminaires have been refreshed to comply with the new surface contact temperature standard IEC 60598-2-13 Areas Touch characteristic Class Glass T Height Static load Non-accessible areas A1.1 T > 100 C No value No value OK Walk-over (pedestrians and cyclists only) for restricted accessible areas OK A1.2 T < 100 C h < 5mm or <25mm when installed in no-walking places close to the wall or the surface to light 500kg Drive-over for all other accessible areas OK A1.3 T < 80 C h < 75mm 2000kg Drive-over for all other accessible areas OK A1.4 T < 80 C h < 5mm or <25mm when installed in no-walking places close to the wall or the surface to light 2000kg Particular areas where working temperatures may cause injuries ie nurseries, swimming pools etc OK OK A1.5 T < 40 C h < 5mm or <25mm when installed in no-walking places close to the wall or the surface to light 500kg 3
D-CO LED, E/Fact Slim 3 walk-over and Mica Slim drive-over recessed luminaires are defined by their distinctive and individual applications, technical and design characteristics The luminaires offer the designer effective and efficient lighting, with the advantage of concealed equipment which optimises public safety. They can be used to illuminate building façades, sculpture and foliage or to provide pathway guidance. Internal adjustments and asymmetric beams offer offset (angled) light direction. Frosted glass and attachments can give a screened appearance to limit glare of the light source. Walk-over D-CO LED E/Fact Slim 3 Application Walk-over Sizes Mini Medi Maxi - Light sources LED Lamp and LED IK 10 10 09 09 IP 67 D-CO LED Maxi E/Fact Slim 3 Static load 500kg 1000kg Norm temperatures Frame LED < 40 C Lamp < 100 C Stainless steel Enclosure Frosted Frosted Clear Semi-frosted Product constitution Body, recessed box, power supply, frame and glass Pre-wired Yes 4
Drive-over Mica Slim Mica Slim Application Drive-over Sizes SS S A I Light sources Lamp and LED IK 10 IP 67 Static load Norm temperatures Frame Enclosure Product constitution Pre-wired 5000kg LED < 40 C Lamp < 100 C Stainless steel Semi-frosted and frosted Body, recessed box, power supply, frame and glass Yes 5
PEC and Obtrusive light At Thorn we recognise our sustainability responsibilities, and with the PEC programme we have introduced a wide-ranging philosophy that underpins our approach to lighting design and implementation. The programme is based on the principle that performance, efficiency and comfort determine the visual effectiveness of lighting. Performance: Providing the best visual effectiveness Efficiency: Conserving energy and effort, reducing CO 2 emissions and waste, providing lighting that is practical and efficient to install, operate and maintain Comfort: Providing people satisfaction and stimulation 6
Performance Wide range of light sources, including LEDs, ensures the right environment for all applications. Modelling from accent (Semi-frosted glass) versions, creates highlights and shadows Frosted glasses and attachments, control light distribution and eradicate glare. Efficiency Includes LED technology with electronic ballasts which conserves energy and lowers running costs. Practical, long life LEDs deliver optimum performance over extended maintenance cycles. Low wattages, angled beams, frosted glass and optical accessories all facilitate in preventing obtrusive light. Comfort Low surface temperature provides a safe, assured environment Semi-frosted or Frosted glass options used to create ambience and adds elegance to an area. Static or dynamic colours create engaging effects. Considering obtrusive light Light is most effective when we are not aware of it. D-CO LED, E/Fact Slim 3 and Mica Slim offer precise beam control and thoughtful on site application will assist with preventing obtrusive light. Luminaires can be positioned close to the subject they are lighting, i.e. illuminate foliage from directly underneath. For building façades, position the luminaires close to the building and use angled lighting to distribute all of the output onto the facade. For marking out pathways, use low wattage light sources with frosted glass. Where relevant, aim the luminaires accurately. The limitation of obtrusive light is also accommodated by using the minimum quantity of luminaires. In many installations, surprisingly little light is required to produce a dramatic effect. The actual amount will vary depending on ambient light levels, therefore, lighting levels are needed before a successful lighting design can be produced. 7
D-CO LED The latest addition to the Recessed Architectural Floodlighting range with new contact temperature norm: < 40 C. Choice of 3 sizes: Product name Power Light source Glass Application Beam angle Tilting angle Colour D-CO LED Mini 1x1.2W LED Frosted Guidance 2x6 o - 3000K D-CO LED Medi 1x1.2W LED Frosted Guidance 2x6 o - 3000K D-CO LED Maxi 6x1.2W LED Clear Illumination 2x6 o +/-24 3000K - Mini: Frosted glass for guidance lighting. - Medi: Frosted glass for guidance lighting. - Maxi: Clear glass for accent illumination. Stainless steel trim. Maxi can be tilted by up to +/- 24. Integral power supply for Medi and Maxi versions. Mini version is supplied in kit form (6 luminaires per kit). Pre-wired for simple and fast installation. D-CO LED Mini D-CO LED Medi D-CO LED Maxi 8
E/Fact Slim 3 The complete range is in line with the new contact temperature norm: <100 C for conventional versions and <40 C for LED versions. 2 light source options: LEDs and Metal Halide. Stainless steel trim. Semi-frosted glass enclosure for façade illumination. Asymmetric light distribution for Metal Halide option. Integral power supply. Can be ceiling mounted using optional recess kit. Product name E/FACT SLIM 3 Power Light source Glass Application Beam angle 16x1.2W LED Semi-frosted Illumination 2x2 o - 70W HIT A/S Semi-frosted Illumination Long. 2x31 Phi: 34 Tilting angle Colour Warm White 3000K Cool White 4000K - - E/Fact Slim 3 9
D-CO LED and E/Fact Slim 3 Technical Data LED (Pre-fixed PCB) D-CO LED Mini: 1x1.2W D-CO LED Medi: 1x1.2W D-CO LED Maxi: 6x1.2W E/Fact Slim 3: 16x1.2W Lamps E/Fact Slim 3: 70W HIT-DE (MD) Metal halide, cap: Rx7s Materials/Finish D-CO LED: Body: aluminium (for Mini and Maxi), PC/ABS blend for Medi. Frame: 316 stainless steel. Retaining screws: stainless steel. Glass: toughened glass, frosted (Mini and Medi), clear (Maxi). Gasket: anti-ageing silicon. Recessing box: aluminium (except Maxi - ABS) with plastic end cap. Pre-wired cable: H05RN-F, 0.5m length. Connection boxes: PC/ABS blend. All versions except Mini have integral power supply. All versions have electronic drivers. E/Fact Slim 3: Body: LM6 marine grade die-cast aluminium, powder coated for further protection. Frame: 316 Stainless steel (3mm thick). Retaining screws: stainless steel. Glass: 15mm toughened semifrosted. Gasket: anti-ageing silicon. Recessing box: polypropylene. Pre-wired cable: H07RN-F, 0.5m length. All versions have integral power supply. Electronic driver for LED versions, magnetic ballast for Metal Halide version. Installation/Mounting For outdoor applications, 30cm drainage gravel or any equivalent drainage system must be used beneath the housing to ensure water can evacuate. The recessed box can be embedded in asphalt with good drainage once the temperature of the asphalt is approximately 80 C. D-CO LED: Luminaires delivered complete with body, recess box, frame and glass. All the fittings are supplied with 5m cable. Mini kit luminaires are individually pre-wired with a 5m cable and supplied with an 8 way connection box, containing gear and connectors including a specific connector for through wiring. The maximum static load is 500kg. To facilitate quick installation, the wiring can be done via IP67 wiring connectors (SAP codes 96257910 or 96257911). For through wiring, IP67 connection boxes can be used (SAP code 96257907). E/Fact Slim 3: Luminaires delivered complete with body, recess box, frame and glass, cable. Luminaire must be operated for 45 minutes without its front glass to avoid moisture building up inside the housing. The maximum static load is 1000kg. To facilitate quick installation, the wiring can be done via IP67 wiring connectors (SAP codes 96257910 or 96257911). For through wiring, IP67 connection boxes can be used (SAP codes 96257907, 96257908 or 96257909). Standards Designed and manufactured to comply with AS/NZS 60598 Class I Electrical (E/Fact Slim 3 and D-CO LED Maxi). Class II Electrical (D-CO LED Mini and Medi). IK 09 for E/Fact Slim 3 and D-CO LED Maxi. IK 10 for D-CO LED Mini and Medi. IP67. 10
Ø39 Ø47 Ø26 3 90 93 D-CO Mini Ø95 Ø84 120 126 Ø86 D-CO Medi D-CO R LED MAXI 6X1.2W WHI 3000K CL 3.5 Ø165 Ø241 199 Intensities kcd/klm 2.7 1.8 0.9-90 -60-30 0 30 60 90 D-CO Maxi EFACT SLIM 3 16X1.2W ACC LED W 6K SF 240 5 115 Ø 370 Ø 340 400 88 Intensities kcd/klm 180 120 60-90 -60-30 0 30 60 90 E/Fact Slim 3 11
Mica Slim The complete range is in line with the new contact temperature norm: <80 C for Metal Halide versions and <40 C for LED versions. Wide choice of versions to cover all applications: 2 light source options: LEDs and Metal Halide lamps. Stainless steel trim. 2 glass finishes: semi-frosted for illumination and frosted for guidance. Mica Slim I with dynamic colour changing (RGB) driven with DMX. Tilting angle adjustment for semi-frosted glass versions (except for Mica Slim SS or asymmetrical light distributions (A/S)). Integral power supplies. All versions are pre-wired with a 0.5m cable. Mica Slim SS Mica Slim S 12
Product name Power Light source type Glass Application Angle opening Tilting angle Colour MICA SLIM SS 1x1.2W LED MICA SLIM S 3x1.2W LED Semi-frosted Illumination 2x2 +/-15 WHITE 3000K Frosted Guidance 2x46 - WHITE 6000K Semi-frosted Illumination 2x2 +/-15 WHITE 3000K Frosted Guidance 2x35 - WHITE 6000K 4x2W LED Frosted Guidance 2x38 - WHITE 3000K Semi-frosted Illumination 2x2 mono +/-15 WHITE 6000K HIT-TC-CE 6D Semi-frosted Illumination 2x2 +/-15 - Frosted Guidance 2x2 - - MICA SLIM A 20W HIT-TC-CE 20D Frosted Guidance 2x16 - - Semi-frosted Illumination 2x16 +/-15 - HIT-TC-CE A/S Semi-frosted Illumination 35W HIT-TC-CE A/S Semi-frosted Illumination Long. 2x32 Phi: 33 Long. 2x39 Phi: 61 - - - - 7x2W LED MONO 4x3x1.2W LED RGB Frosted Guidance 2x45 - WHITE 3000K WHITE 6000K 7x2W LED MONO & RGB Semi-frosted Illumination 2x2 mono RGB +/-15 2x11 for RGB MICA SLIM I HIT-TC-CE 6D Semi-frosted Illumination 2x2.5 +/-15-35W HIT-TC-CE 20D Frosted Guidance 2x22 - - Semi-frosted Illumination 2x10 +/-15 - HIT-TC-CE A/S Semi-frosted Illumination Long. 2x30 Phi: 28 - - Mica Slim A Mica Slim I 13
Mica Slim Technical Data LED (Pre-fixed PCB) Monochromatic versions: Mica Slim SS: 1x1.2W Mica Slim S: 3x1.2W Mica Slim A: 4x2W Mica Slim I: 7x2W RGB versions For guidance: Mica Slim I: 4x3x1.2W with multichip RGB For Illumination: Mica Slim I: 7x2W (RRGGGBB) Lamps Mica Slim A: 20W/35W HIT-TC-CE (MT) Metal halide, cap: PGJ5 Mica Slim I: 35W HIT (MT) Metal halide, cap: G12 Materials/Finish Body: LM6 marine grade die-cast aluminium with powder coated for high corrosion resistance. Frame: 316 Stainless steel (3mm thick). Retaining screws: stainless steel Front glass: toughened semi-frosted or frosted sodic glass. Glass thicknesses: Mica Slim A and I: 19mm. Mica Slim SS and S: 15mm. Gasket: anti-ageing silicon. Recessing box: polypropylene. Cable: H07RN-F 0.5m long All versions have integral power supply. All versions have electronic ballast. Installation/Mounting Luminiares delivered complete with body, recess box, frame and glass. All versions are pre-wired, with a 0.5m cable. For outdoor applications, 30cm drainage gravel or any equivalent drainage system must be used beneath the housing to ensure water can evacuate. The recessed box can be embedded in asphalt with good drainage once the temperature of the asphalt is approximately 80 C. Luminaire must be operated for 45 minutes without its front glass to avoid moisture build-up inside the housing. Can be installed in areas with a maximum low speed of 30km/hr. To facilitate quick installation, the wiring can be done via to IP67 wiring connectors (SAP codes 96257910 or 96257911). For through wiring, IP67 connection boxes can be used (SAP codes 96257907, 96257908 or 96257909). All versions have integral power supply. The maximum static load is 5000kg. Colour change RGB lighting technology available in Mica Slim I for guidance or illumination. For RGB versions, LEDs are driven by DMX control (not supplied). Standards Design and manufactured to comply with AS/NZS 60598. Class I Electrical. IK 10. IP67. 14
MICA SLIM SS 1X1.2W ACC LED W 6K SF 240 113 103 187 3 175 Intensities kcd/klm 180 120 60-90 -60-30 0 30 60 90 Mica Slim SS 165 153 3 MICA SLIM S 3X1.2W ACC LED W 6K SF 160 237 175 Intensities kcd/klm 120 80 40-90 -60-30 0 30 60 90 Mica Slim S 235 222 3 MICA SLIM A 4X2W ACC LED W 6K SF 240 MICA SLIM A 20/35W HIT-TC A/S SF 600 298 195 Intensities kcd/klm 180 120 60 Intensities cd/klm 450 300 150-90 -60-30 0 30 60 90-90 -60-30 0 30 60 90 Mica Slim A MICA SLIM I 7X2W ACC LED W 6K SF 240 MICA SLIM I 35W HIT A/S SF 1000 3 200 315 298 Intensities kcd/klm 180 120 60 Intensities cd/klm 750 500 250 Ø375-90 -60-30 0 30 60 90-90 -60-30 0 30 60 90 Mica Slim I 15
D-CO LED & E/Fact Slim 3 Ordering Guides D-CO LED Supplied complete with LEDs Description Ilcos Code Socket Wt (kg) SAP Code D-CO R LED MINI 6/1X1.2W WHI 3000K FR KIT - - 1.4 96536651 D-CO R LED MEDI 1X1.2W WHI 3000K FR - - 0.7 96536652 D-CO R LED MAXI 6X1.2W WHI 3000K CL - - 3.0 96536653 WHI: white, FR: frosted glass, CL: clear glass E/Fact Slim 3 Lamps to be ordered separately (except LED versions). Description Ilcos Code Socket Wt (kg) SAP Code EFACT R3 SLIM 1X70W HIT-DE MD RX7S 8.6 96107924 EFACT R3 SLIM 16X1.2W LED WHI 3000K - - 8.9 96107803 EFACT R3 SLIM 16X1.2W LED WHI 6000K - - 8.9 96107802 Optical Accessories EFACT R3 SLIM CEILING RECESS KIT - - - 96257852 16
17
Mica Slim Ordering Guide Lamps to be ordered separately (except LED versions) Glass Description Ilcos Code Socket Wt (kg) SAP Code Mica Slim SS FR SF MICA SLIM SS 1X1.2W LED WHI 3000K - - 1.5 96257370 MICA SLIM SS 1X1.2W LED WHI 6000K - - 1.5 96257369 MICA SLIM SS 1X1.2W LED WHI 3000K - - 2.1 96257418 MICA SLIM SS 1X1.2W LED WHI 6000K - - 2.1 96503614 Mica Slim S FR SF MICA SLIM S 3X1.2W LED WHI 3000K - - 2.6 96257427 MICA SLIM S 3X1.2W LED WHI 6000K - - 2.6 96257426 MICA SLIM S 3X1.2W LED WHI 3000K - - 2.6 96257433 MICA SLIM S 3X1.2W LED WHI 6000K - - 2.6 96503636 Mica Slim A MICA SLIM A 4X2W LED WHI 3000K - - 5.0 96257442 FR MICA SLIM A 4X2W LED WHI 6000K - - 5.0 96257441 MICA SLIM A 20W HIT-TC-CE R20 MT PGJ5 5.3 96503660 MICA SLIM A 4X2W LED WHI 3000K - - 5.1 96257455 MICA SLIM A 4X2W LED WHI 6000K - - 5.1 96257454 SF MICA SLIM A 20W HIT-TC-CE 6D MT PGJ5 5.3 96503661 MICA SLIM A 20W HIT-TC-CE 20D MT PGJ5 5.3 96257447 MICA SLIM A 20W HIT-TC-CE A/S MT PGJ5 5.2 96503662 MICA SLIM A 35W HIT-TC-CE A/S MT PGJ5 5.2 96503663 Mica Slim I MICA SLIM I 7X2W LED WHI 3000K - - 8.6 96257481 FR MICA SLIM I 7X2W LED WHI 6000K - - 8.6 96257479 MICA SLIM I 4X3X1.2W LED RGB DMX - - 8.6 96257485 MICA SLIM I 35W HIT 20D MT G12 8.7 96257467 MICA SLIM I 7X2W LED WHI 3000K - - 8.8 96257473 MICA SLIM I 7X2W LED WHI 6000K - - 8.8 96257471 SF MICA SLIM I 7X2W LED RGB DMX - - 8.8 96257477 MICA SLIM I 35W HIT 6D MT G12 8.7 96257463 MICA SLIM I 35W HIT A/S MT G12 9.0 96257469 WHI: white, A/S: asymmetric light distribution, 6D: angle opening +/-3, 20D: angle opening +/-10, FR: frosted glass, SF: semi-frosted glass 18
Accessories Optical Accessories (no accessories for D-CO LED, E/Fact Slim 3, Mica Slim SS or Mica Slim S) Description Used in Wt (kg) SAP Code Optical Accessories MICA SLIM A FILTER/BLU BLUE FILTER MICA SLIM A 20W HIT-TC-CE R6 or R20 0.2 96503666 MICA SLIM A FILTER/RED RED FILTER MICA SLIM A 20W HIT-TC-CE R6 or R20 0.2 96503667 MICA SLIM A FILTER/GRN GREEN FILTER MICA SLIM A 20W HIT-TC-CE R6 or R20 0.2 96503668 MICA SLIM A FILTER/YEL YELLOW FILTER MICA SLIM A 20W HIT-TC-CE R6 or R20 0.2 96503669 MICA SLIM A LVBACK 6D ANTI-GLARE SHIELD MICA SLIM A 20W HIT-TC-CE R6 0.2 96503685 MICA SLIM A 20W 20D LV ANTI-GLARE SHIELD MICA SLIM A 20W HIT-TC-CE R20 0.2 96257859 MICA SLIM I 35W 6/20D LV ANTI-GLARE SHIELD MICA SLIM I 35W HIT R20 or R6 0.1 96257858 IP67 Connection Accessories Description Wt (kg) SAP Code CONNECT CABLE 3/3X1.5² IP67 MICRO CONNECTION BOX IP67 3 ENTRIES 0.1 96257907 CONNECT CABLE BOX 3/4X2.5² IP67 MINI CONNECTION BOX IP67 3 ENTRIES 0.4 96257908 CONNECT CABLE BOX 4/6X2.5² IP67 CONNECTION BOX IP67 4 ENTRIES 0.4 96257909 CONNECT CABLE 2/4X1.5² IP67 CONNECTOR 1 FITTING 1.5mm² IP67 0.1 96257910 CONNECT CABLE 2/3X4.0² IP67 CONNECTOR 1 FITTING 4.0mm² IP67 0.1 96257911 96257910 The IP67 cable ends are inserted and sealed in the terminals in the same way as with a cable gland. This connection can be disconnected at any time in order to replace the circuit board unit. 96257911 The IP67 connector makes it possible to secure feed lines on an internal terminal block using screw terminals. The terminal blocks are designed for a maximum core cross-sectional area of 4mm² and up to 3 strands. 96257909 A IP67 universal connection box for through wiring or cross wiring to terminals for cable diameters of 0.8 to 2.5mm. 96257908 Small IP67 connection box allowing pressurised-water-tight connection of up to 3 cable entries for through wiring outside a luminaire unit. It can be used as an alternative to self-bonding tape or splice sleeves. 96257907 3-way cable connector, 1.5mm², IP67 with connecting terminal; allows up to 3 cables to be connected; can also be used for through wiring. 19
Head Office Australia Sydney Thorn Lighting Pty Limited 43 Newton Road Wetherill Park NSW 2164 Tel: (02) 8786 6000 Fax: (02) 9612 2700 e-mail: infoaustralia@thornlighting.com www.thornlighting.com.au New Zealand Auckland Thorn Lighting (NZ) Limited 399 Rosebank Road Avondale, Auckland 1026 PO Box 71134, Rosebank Auckland 1348 Tel: (09) 828 7155 Fax: (09) 828 7591 e-mail: info.nz@thornlighting.com www.thornlighting.co.nz Free Phone: 0800 800 834 Australian Branches New South Wales Sydney 43 Newton Road Wetherill Park NSW 2164 Tel: 1300 13 99 65 Sales Fax: 1300 13 99 53 Project Fax: 1300 13 99 57 Northern Territory Darwin Unit 3/132 Coonawarra Road Winnellie N.T. 0820 Tel: 1300 13 99 65 Sales Fax: 1300 13 99 53 Project Fax: 1300 13 99 57 Western Australia Perth 2/32 Sarich Court Osborne Park WA 6017 Tel: 1300 13 99 65 Sales Fax: 1300 13 99 53 Project Fax: 1300 13 99 57 South Australia Adelaide 1 Graham Street Export Park SA 5950 Tel: 1300 13 99 65 Sales Fax: 1300 13 99 53 Project Fax: 1300 13 99 57 Victoria Melbourne 55 McGregors Drive Keilor Park VIC 3042 Tel: 1300 13 99 65 Sales Fax: 1300 13 99 53 Project Fax: 1300 13 99 57 Queensland Brisbane 2/106 Fison Avenue West Eagle Farm QLD 4009 Tel: 1300 13 99 65 Sales Fax: 1300 13 99 53 Project Fax: 1300 13 99 57 Tasmania Hobart 12 Fleet Street Moonah TAS 7009 Tel: 1300 13 99 65 Sales Fax: 1300 13 99 53 Project Fax: 1300 13 99 57 New Zealand Branches Wellington Unit 12, 4 Tyers Road, Ngauranga, Wellington 6035 P O Box 31281, Lower Hut Wellington 5040 Tel: (04) 569 4826 Fax: (04) 589 0497 Christchurch 11 Lancaster Street, Waltham, Christchurch 8011 Tel: (03) 366 2485 Fax: (03) 366 8905 Thorn Lighting is constantly developing and improving its products. All descriptions, illustrations, drawings and specifications in this publication present only general particulars and shall not form part of any contract. The right is reserved to change specifications without prior notification or public announcement. All goods supplied by the company are supplied subject to the company s General Conditions of Sale, a copy of which is available on request. All measurements are in millimetres and weights in kilograms unless otherwise stated. Publication Date: 04/2011