STATE OF MINNESOTA PRICING PAGE - FIXED PRICE (Typed Responses Required)

SEQ # 725-417 April, 2017 STATE OF MINNESOTA PRICING PAGE - FIXED PRICE (Typed Responses Required) 1 of 6 Price quote for: MUNICIPAL UTILITY TRACTOR Vendor Name: Northern Truck Equipment Corp Contact Person: John Wartenbee Street Address: 47213 Schweiger Circle P.O. Box: 2435 City, State, Zip Sioux Falls, SD 57101 Phone #: 605-543-5206 Toll Free #: Fax #: 605-543-5219 Email Address: jwartenbee@ntecorp.com Spec # INFORMATION REQUESTED ANSWER 1.0 MAKE AND MODEL (Provide Make and Model Offered) RPM Tech - Cameleon Series 2 ENGINE (Model) Number of Cylinders Type of Fuel Horse Power Air or Liquid Cooled C3.4 Cat Tier IV Final 4 Cylinder Diesel 11.5 HP Air Cooled PTO Front Size Rear Size HITCHES Front (lift capacity & type) Rear (lift capacity & type) Up To 1,500 Lbs. N/! TRANSMISSION Type Number of Speeds Control Type Hydrostatic 2 Speeds Electronic Pedal HYDRAULICS GPM Number of Spools 32 GPM On Front (Optonal) 4 Spool On Front End - 1 Rear DRIVE SYSTEM Type Transfer Case (yes or no) 4WD Type (i.e., constant) Hydraulic Motor AXLES Model Capacity per Axle

SEQ # 725-417 April, 2017 STATE OF MINNESOTA PRICING PAGE - FIXED PRICE (Typed Responses Required) 2 of 6 Spec # INFORMATION REQUESTED ANSWER BRAKES Hydrostatic W/Spring Loaded Parking Brakes WHEELS Number of Bolts Diameter Track System TIRES Front Size & Ply Rear Size & Ply STEERING Type Steering Wheel Adjustment (tilt, telescope, etc.) Turning Radius FRAME TYPE INSTUMENTS (list) By Microprocessor Tilt And Telescopic 0 Radius Fixed Chassis See Technical Description CAB Certifications ROPS (ISO 3471) Cab Size (1 or 2 people, etc.) Windows (tinted sliding, etc.) Type of Seat Seat Upholstery Other Cab Equipment (list) 1 Person Slightly Tinted And Sliding Mechanical Or Airride Vinyl And Fabric See Brochure SPEEDS (if applicable) Lo Range High Range Deep Low Yes Yes DIMENSIONS Wheel Base Length (less liftarms) Height (top of cab) Width (single tires) Weight Rear Axle Weight Front Axle WARRANTY 88"/93" With Strobe 1 Year/1500 Hours BASE UNIT PRICE: $119,660.00

SEQ # 725-417 April, 2017 STATE OF MINNESOTA PRICING PAGE - FIXED PRICE (Typed Responses Required) 3 of 6 Spec # INFORMATION REQUESTED ANSWER 2.0 EXTENDED WARRANTY OPTIONS Use this section to offer performance/warranty options, number these items starting with 2.1, 2.2, 2.3, etc. (Specify years, miles or hours extended term covers.) Price: 3.0 DELIVERY CHARGES - SEE SPECIAL TERMS AND CONDITIO NO FLAT RATE ALLOWED Levis Quebec Canada DELIVERY STARTING POINT - City, State, Zip PRICE PER LOADED MILE $5.10 4.0 NEW EQUIPMENT RENTAL PROGRAM If rental programs are available on the new equipment offered, with the option to purchase, list the hourly/weekly/monthly rental rate. Indicate the percent of rental fee paid by the purchaser that will be applied to the purchase price. See Solicitation Special Terms & Conditions. Hourly Rental Rate: Weekly Rental Rate: Monthly Rental Rate: Percent (%) of Rental Fee applied to purchase price: If the new rental equipment is purchased and finance charges are applicable for the actual rental term only, state the actual interest rate here: $ $ $ 5.0 VENDOR OWNED RENTAL RETURN OR DEMO EQUIPMENT PROGRAM See Solicitation Special Terms and Conditions. DEDUCT cost per Used Hour from the original Contract Price 6.0 INSTALLATION - PER HOUR (Hourly Shop Rate) $ /Hour (See Special Terms and Conditions)

VENDOR : MAKE /MODEL Northern Truck Equipment Corp RPM Tech - Cameleion Series 2 1.0 BASE UNIT PRICE: $119,660.00 $119,660 Spec # Description Qty Price Subtotal 2.0 Municipal Utility Tractor Options Use this section to offer additional Municipal Utility Tractor options such as hand controls, gauges, heater, enclosed cab etc.. These options should be for Municipal Utility Tractor power unit and not attachments. 2.1 $ - 2.2 $ - 2.3 $ - 3.0 Plow Use this section to offer plow options. 3.1 60" Angle Plow $5,226.00 $5,226.00 3.2 Fixed V-Plow $6,012.00 $6,012.00 3.3 $ - 4.0 Snowblower Use this section to offer snowblower options. 4.1 54" Double Auger $26,882.00 $26,882.00 4.2 $ - 4.3 $ - 5.0 Salt and Sand Spreader Use this section to offer salt and sand spreader options. 5.1 Grandby 725 Back Pack Style $6,336.00 $6,336.00 5.2 $ - 5.3 $ - 6.0 Directional Sweeper Use this section to offer directional sweeper options. 6.1 $ - 6.2 $ - 6.3 $ - 7.0 Pickup Sweeper Use this section to offer pickup sweeper options. 7.1 $ - 7.2 $ - 7.3 $ -

SEQ# 725-417 April, 2017 VENDOR : Northern Truck Equipment Corp STATE OF MINNESOTA PRICING PAGE - FIXED PRICE (Typed Responses Requested) 5 of 6 MAKE /MODEL RPM Tech - Cameleion Series 2 1.0 BASE UNIT PRICE: $119,660.00 $119,660 Spec # Description Qty Price Subtotal 8.0 Spraying System Use this section to offer sweeper options. 8.1 $ - 8.2 $ - 8.3 $ - 9.0 Cold Planer Use this section to offer cold planer options. 9.1 $ - 9.2 $ - 9.3 $ - 10.0 Sickle Bar Mower Use this section to sickle bar mower options. 10.1 $ - 10.2 $ - 10.3 $ - 11.0 Flail Mower Use this section to offer flail mower options. 11.1 $ - 11.2 $ - 11.3 $ - 12.0 Boom Flail Use this section to offer boom flail options. 12.1 $ - 12.2 $ - 12.3 $ - 13.0 Rotary Use this section to offer rotary options. 13.1 $ - 13.2 $ - 13.3 $ - 14.0 Trencher Use this section to offer trencher options. 14.1 $ - 14.2 $ - 14.3 $ -

VENDOR : MAKE /MODEL Northern Truck Equipment Corp RPM Tech - Cameleion Series 2 1.0 BASE UNIT PRICE: $119,660.00 $119,660 Spec # Description Qty Price Subtotal 15.0 Chipper Use this section to offer grader options. 15.1 $ - 15.2 $ - 15.3 $ - 16.0 Tiller Use this section to offer tiller options. 16.1 $ - 16.2 $ - 16.3 $ - 17.0 Other: Use this section to offer any other option(s) not already listed (repair/parts/operator manual etc.). 17.1 $ - 17.2 $ - 17.3 $ - 18.0 Performance option: Use this section to offer extended warranties. 18.1 $ - 18.2 $ - 18.3 $ - 19.0 DELIVERY CHARGES - SEE SPECIAL TERMS AND CONDITIONS NO FLAT RATE ALLOWED DELIVERY STARTING POINT - City, State, Zip Levis Quebec Canada PRICE PER LOADED MILE $5.10

CAMELEON SERIES 2 TRACKED VEHICLE TECHNICAL DESCRIPTION Designed and manufactured by R.P.M. Tech Inc. 1. GENERAL The CAMELEON Series 2 is a tracked vehicle equipped with a super rugged chassis, a TIER IV engine, compliant to the most recent environmental regulations and a hydrostatic drive power train. It is designed to provide customers a versatile, reliable and durable maintenance vehicle. 2. DIMENSIONS (without attachments) Overall length: 3,404 mm (134 in.) Overall height: 2,375 mm (93.5 in. Including strobe light) Weight for shipping: 3,629 kg (8,000 lb) approx. Overall width: 1,302 mm (51.25 in.) Ground clearance: 235 mm (9.25 in.) 3. FEATURES Skid type steel chassis welded Single-seat reclining cabin made of steel and mounted on shock absorbers Steel engine cowling with 2 access doors for easy maintenance Outside windshield washer tank of 3.75 L (1 gal.) capacity Push frame with quick-connect adaptors for easy installation of accessories including: 2 hydraulic lift cylinders Rear trailer hitch of 2722 kg (6000 lb) capacity Plastic bushings and rubber absorbers installed on mobile components to prevent any metal to metal contact and eliminate vibration problems and premature wear of these parts by friction Maximum speed of 30 km/h (19 mph) Two speed transmission controlled by a steering wheel mounted selector: Work mode at reduced speed: 18 km/h (11 mph) Travel mode with steering sensitivity: 30 km/h (19 mph) Ground pressure on tracks: 35 kpa (5.1 psi) Turning radius on tracks: 0 in. 4. PROPULSION GROUP Caterpillar C3.4 turbocharged Diesel engine, Tier IV Final with electronic regulator Power 86 kw (115 hp) @ 2500 rpm Torque 475 N.m (350 lb-pi) @1400 rpm Glow plugs in the intake pre-heater Heavy-duty radiator with coolant drain, mounted on rubber absorbers Bolted access doors for quick and easy maintenance of the radiator Fuel tank capacity: 100 L (27 gal.) 50 mm (2 in.) fuel filler cap Cameleon Series 2 Technical description 2017-03.docx Page 1 of 4

Low fuel electronic sensor Dry-type air cleaner Hydrostatic transmission with: Hydrostatic drive pump Danfoss Series H1: 53 cc Hydrostatic motor Danfoss Series KV45: 45 cc Service brake through hydrostatic transmission 5. TRACTION SYSTEM 11 tooth sprocket system, UHMW-PE Six (6) solid rubber wheels Front wheels 559 mm (22 in.) dia. Rear wheels 622 mm (24.5 in.) dia. Front wheels mounted on air suspension with adjustment and hydraulic shock absorbers Rear wheels mounted in tandem Bridgestone rubber tracks, endless, steel reinforced, 350 mm (13.75 in.) wide Automatic system controlling each track through a microprocessor Track tension adjustment cylinder Mechanical release system for towing 6. HYDRAULIC SYSTEM Gear pump Maximal operating pressure: 152 bar (2,200 psi) Filtration on return line to reservoir 10 microns Combined hydraulic and hydrostatic reservoir: o o Helps better manage hydraulic oil temperature Prevents cavitation which results in extending service life of the pump and hydraulic motor Separate reservoirs available in option Parker hydraulic hoses and fittings Eight (8) hydraulic quick connectors with a capacity of 4 gpm at the front One rear electrical plug for trailer or accessories Two (2) rear hydraulic connectors with a capacity of 12 gpm Automatic adjustment of the spreading rate according to the speed of the vehicle set by the operator, directly on the screen High flow hydraulic outlet 32 GPM @ 4350 psi with quick connectors (inlet, outlet and drain line) available in option Joystick and integrated trigger switch for flotation system The ergonomic lever is adjustable and will control all hydraulic functions of the vehicle and accessories (e.g. blower, snow chute, spreader, plow and many other standard attachments on the market) 7. COMFORT AND ERGONOMY FEATURES COMFORT Cabin insulated for noise level not to exceed 74 dba at a maximum operating speed (2100 rpm) Coat hook and cup holder Cameleon Series 2 Technical description 2017-03.docx Page 2 of 4

Windshield type AS-1 with sun visor compliant to DOT regulations AM/FM radio, CD player, USB port, Bluetooth connection, and rear speakers Lateral sliding windows Interior dome light 3 speed heater fan: 40000 BTU with 4 outlets; two (2) for defrost purposes and two (2) for ambient air heating Rear defrost available in option 2-speed front wiper with intermittent feature and windshield washer dispenser Footboard to ease access to the cabin ERGONOMY Two rear-view mirrors inside the cabin Mechanical suspension seat and two (2) adjustable armrests Pneumatic suspension seat available in option Tilt and telescopic steering column (30 ) and 40 mm (1.57 in.) with gearshift lever and lever control for headlights and signal lamps Steering arm horn Complete dashboard allowing the operator easy access to different controls: Two (2) 12 VDC auxiliary electrical outlets Emergency shutdown button Heating control selector Wiper control button Parking brake switch Backup alarm (activation switch on the screen) Adjustable colour multifunction 7 in. LCD screen with dials for: Engine RPM Speedometer Fuel level Engine oil pressure Diesel Exhaust Fluid (DEF) level Horometer 8. ELECTRICAL SYSTEM 12 V power system negative ground 120 A alternator with voltage controller integrated Cold cranking start at 1125 CCA Block heater of 800 watts Complete lighting system including: Three (3) halogen lights in the front: Two (2) high intensity lights and one (1) work light One (1) halogen backup light Turn signal and indicator lights at the front and rear Protection bar for headlights and indicator lights One (1) strobe beacon Alarms and indicator lamps to facilitate the work of the operator: Engine oil pressure Low hydraulic oil level Cameleon Series 2 Technical description 2017-03.docx Page 3 of 4

Hydraulic filter clogging Hydraulic oil temperature Error code for the engine (including cooling liquid low level) Air and water engine temperature Battery charging system Malfunction indicator lamp (MIL) Low fuel level Travel light indicator Maintenance module display screen allowing: Engine codes reading Joystick sensitivity configuration Review of the last 15 maintenance reports done on the unit Choice of metric or imperial system configuration 9. WARRANTIES / HANDBOOKS Warranty on vehicle 1 year / 1500 hours (parts and labour) whichever occurs first, from first day in service, provided that first day in service is no later than sixty (60) days from delivery to original buyer Engine: 2 years / 3000 hours Operation/maintenance kit including: Parts handbook Operations handbook Caterpillar instruction book 10. SAFETY Built to meet the Roll-Over Protective Structures ROPS (ISO 3471) standard Engine shut down system for high temperature and low engine oil pressure Safety belt with three (3) tie points Backup alarm 11. OPTIONS Seat with pneumatic suspension Rear defrost Extended warranty High flow hydraulic outlet 32 GPM @ 4350 psi with two (2) quick connectors for the PTO pump and one (1) for the drain line Hydraulic and hydrostatic separate reservoirs 12. COLOR Yellow & Grey Cameleon Series 2 Technical description 2017-03.docx Page 4 of 4

Unmatched pushing force Powerful Tier 4 engine of 115 hp Superior traction Series Municipal Tracked Vehicle Ideal for tight space Comfortable and spacious cabin

Cameleon Series 2 Technical Specifications The tilt over cabin and the two (2) engine access doors facilitate routine maintenance and save you time Rear hydraulic connectors and towing hitch provide the capability to mount or attach a spreader The cabin design allows maximum visibility to the operator DIMENSIONS Overall length: Overall height: Overall width: Weight: 3404 mm (134 in.) 2375 mm (93 ½ in.) 1302 mm (51 ¼ in.) 3629 kg (8000 lb) approx OPERATING FEATURES Maximum speed of 30 km/h (19 mph) Two speed transmission: Work mode: 18 km/h (11 mph) Travel mode: 30 km/h (19 mph) Ground clearance: 235 mm (9 ¼ in.) Turning radius: 0 in. CHASSIS/CABIN Steel construction Toboggan style welded chassis Push frame with quick coupler ready to receive attachment including: - Two (2) hydraulic cylinders - Rear towing hitch, capacity of 2722 kg (6000 lb) Comfortable, well equipped cabin: - Insulated for noise level not to exceed 74 dba at the maximal operating speed - Seat with mechanical suspension, adjustable armrests, and security belt - Tilt and telescopic steering wheel - Three (3) speed, 40000 BTU heater with a fresh air inlet - AM/FM radio, USB plug, Bluetooth connection, and speakers - Front intermittent pantograph wiper - Two mirrors PROPULSION GROUP 86 kw (115 hp) Caterpillar C3.4 turbocharged, diesel Tier 4 Final engine with electronic regulator Fuel tank capacity: 100 L (27 gal) Hydrostatic transmission Driving system with independent control of each track via the steering wheel Two (2) endless, steel reinforced Bridgstone rubber tracks; 350 mm (13 ¾ in.) wide Six (6) solid rubber wheels HYDRAULIC SYSTEM Front and rear hydraulic connections for attachments Gear pump maximal operating pressure of 1752 bar (2200 psi) Combined hydraulic and hydrostatic reservoir INSTRUMENT PANEL AND CONTROLS Dashboard: - One high resolution color LCD display of 7 in. featuring operating information and alarms - One key ignition switch - Indicator lights for low level alarms, working lights, and hydraulic oil temperature Attachment controls: - One joystick with integrated functions and emergency stop OPTIONAL EQUIPMENT Selection of attachments: plows, abrasive spreaders, snow blowers, brooms Seat with pneumatic suspension PTO / high flow hydraulics Separated hydraulic and hydrostatic reservoirs RPM Tech inc. reserves the right to change specifications and design features without notice ISO 9001:2015 2220 Michelin Street Laval, QC, H7L 5C3 Canada Cameleon Serie2 Leaflet- En 2017.07v0 Tel.: 1.450.687.3280 1.800.631.9297 (North America) info@rpmtechgroup.com www.rpmtechgroup.com

Purpose of the warranty R.P.M. TECH INC. Base warranty Limited warranty for the Cameleon vehicle The present warranty applies to CAMELEON sold by RPM Tech Inc. ("RPM"). All purchased components not manufactured by RPM such as engines, transmissions, tires, attachments, etc. are sold "AS IS", subject to any warranty available through their respective manufacturers under their own terms and conditions. In the text of the present warranty, CAMELEON excluding major components not manufactured by RPM is referred to as the "Product". Coverage period The Product will be free from defects in material and workmanship under normal use, maintenance and service for a period of one (1) year or 1,500 hours, whichever occurs first, from first day in service, provided first day in service is no later than sixty (60) days from delivery to original buyer. The central pivot will be free from defects in material and workmanship under normal use, maintenance and service for a period of five (5) years or 5,000 hours, whichever occurs first, from first day in service, provided first day in service is no later than sixty (60) days from delivery to original buyer. The said central pivot is defined as the frame link allowing a longitudinal rotation between both front and rear frame portions. The longitudinal rotation represents the clockwise and counterclockwise movements, on the vehicle axis that goes from head to stern, throughout the vehicle whole length. RPM warrants each part replaced under this warranty to be free from defects in material and workmanship for ninety (90) days following its installation in a Product. RPM s responsibilities The Buyer's sole remedy is limited to the repair or replacement, at RPM's option, of the Product or parts proven defective. For the application of the warranty, RPM will pay for the new or repaired parts and labor required in such instances and, when necessary, for reasonable expenses directly associated with the removal and reinstallation of the part if such work is done by an authorized or designated service representative. RPM s liability for losses, damages or expenses of any kind arising from the design, manufacture or sale of the Product covered by this warranty, whether based on warranty, negligence, contract, tort or otherwise is limited to an amount not exceeding the cost of correcting the defects as herein provided and at the expiration of the applicable warranty period all such liability shall terminate. If a breakage occurs on a component purchased from but not manufactured by RPM and that component is under warranty, RPM commits to assist the customer during the warranty claiming process with the concerned manufacturers. RPM is not responsible for the repair or replacement of the Product required because of normal wear, accident, improper installation, lack of maintenance, unauthorized modifications, improper storage, negligence, or from use of parts that do not meet RPM s specifications. RPM-CAMELEON garantie warranty ver 05S.doc Page 1 of 4

Buyer's responsibilities and restrictions to the warranty The Buyer must complete and return the Warranty Registration Form attached in order to activate the warranty on its equipment. The Buyer has the responsibility of getting approval from the RPM technical service when installing any major attachments (such as heavy and/or unbalanced attachments) before using the vehicle with said attachments. This is to prevent accidents or breakage of the equipment and to determine impacts on the performance of the vehicle (braking distance, autonomy, etc.). Using any such attachment without prior approval from RPM may void the warranty or worst, cause serious accidents. The Buyer will be responsible for any failure resulting from an abuse or a misuse of the Product. The Buyer will also be responsible for consequential damages resulting from hydraulic oil contamination while or after using accessories on CAMELEON. In case of abuse or misuse of the Product, the warranty will not apply. The Buyer has the obligation to perform the normal maintenance on the Product. Should the Buyer contravene to such obligation, the warranty will not apply. The warranty will not cover repair where normal use has exhausted the service life of a part or of the Product and in any case, the warranty will not apply after the above-mentioned coverage period is over. The warranty does cover traveling time and mileage to a maximum of 250 km (150 miles) round trip per claim and does not cover for food or lodging expenses. The Product needs periodic parts replacement and services to perform adequately. The service life of any Product is dependent on the care it receives and conditions under which it has to operate and be stored. RPM is not responsible for any other damage, incidental, consequential or special, resulting directly or indirectly from the use of the Product, an attempt to use the Product or from a failure of the Product, even if such failure is covered by the warranty. Remedies available to any person claiming under this warranty are exclusive and expressly limited to obtaining the parts and the labour, where applicable, in accordance with terms of this warranty. No other express or implied warranty, except herein provided for has been made, and no person is authorized to give any other warranties or to assume any other liabilities on RPM's behalf unless made or assumed in writing by an officer of RPM. Warranty does not apply to (unless failure results from workmanship issue): consumable parts such as but not limited to, tires, full rubber wheels, tracks, sprockets, wiper blades, belts, filters, lubricants, cables, bulbs, fuses, glass products, etc; normal maintenance parts, such as but not limited to, all fluids, filters and lubricant, hoses, batteries, o-rings, grease fittings, etc.; any hydraulic components that have been contaminated due to dirt or foreign materials; components operated beyond their capacity; wear items such as but not limited to pneumatic suspension components, hydraulic cylinders, cutting edges, fan shovels, side cutters, skid shoes, rotating knives, bristles, etc.; oil analysis. If the paint surface of the equipment body requires attention during the initial coverage period due to a manufacturing defect, the necessary repairs will be performed by RPM at no charge. Warranty does not apply to damage caused by neglect, flooding, accident, and improper use, RPM-CAMELEON garantie warranty ver 05S.doc Page 2 of 4

failure to properly maintain paint and bodywork by regular cleaning, factors beyond RPM control, such as airborne contamination, storm damage, stone chips, scratches and the use of unsuitable cleaning agents, and repairs using methods that have not been approved by RPM. NOTWITHSTANDING ANYTHING CONTAINED HEREIN TO THE CONTRARY, RPM'S LIABILITY ARISING OUT OF THE MANUFACTURE, SALE OR SUPPLYING OF THE PRODUCTS OR THEIR USE OR DISPOSITION, WHETHER BASED UPON WARRANTY, CONTRACT, TORT OR OTHERWISE, SHALL NOT IN ANY CASE EXCEED THE ACTUAL PURCHASE PRICE PAID BY THE BUYER FOR THE PRODUCT. IN NO EVENT SHALL RPM BE LIABLE TO THE BUYER OR ANY OTHER PERSON OR ENTITY FOR SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, LOSS OF PROFITS, LOSS OF DATA OR LOSS OF USE DAMAGES) ARISING OUT OF THE MANUFACTURE, SALE OR SUPPLYING OF THE PRODUCTS, EVEN IF RPM HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES OR LOSSES. THE PROVISIONS OF THE FOREGOING WARRANTIES ARE IN LIEU OF ANY OTHER WARRANTY, WHETHER EXPRESS OR IMPLIED, WRITTEN OR ORAL (INCLUDING ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE). The laws of the province of Québec in Canada will govern any and all litigation resulting directly or indirectly from this warranty and/or from the sale contract of the Product by RPM. The Courts of the Montreal district jurisdiction shall be the exclusive ones to be seized of such litigation. The Buyer accepts this warranty and the limitations of liability and disclaimers set forth herein as part of purchase of the Product or part to which this warranty applies. RPM-CAMELEON garantie warranty ver 05S.doc Page 3 of 4

R.P.M. TECH INC. Warranty registration form Congratulations on the purchase of your new RPM Tech equipment. In order to register the warranty on the equipment, please fill in this form and return it to RPM Tech upon reception of the equipment. We thank you for your confidence and hope you will enjoy your new equipment. TO BE COMPLETED BY RPM TECH INC. Model Serial N Year Delivery date Number of hours Selling Dealer name Warranty Base EXTENDED (to specify) CAMELEON Engine Serial Number Nearest Engine Service location TO BE COMPLETED BY THE DEALER Equipment owner Date of commissioning Address City Province / State Country Postal code / Zip code Phone number Contact name Please return the completed form by fax to: RPM TECH INC. / Maryse Chapdelaine Fax: 819-478-2890 poste 213 Email: maryse.chapdelaine@grouperpmtech.com Or by mail to the following address: RPM TECH INC. / Maryse Chapdelaine 2220 Jean-de-Brebeuf Blvd. Drummondville QC J2B 8A1 Canada RPM-CAMELEON garantie warranty ver 05S.doc Page 4 of 4