Section H GT50 OHC,, Header............................................................................ -5 Pivots.............................................................................. - Operator........................................................................... 8-1 Control Board.........................................................................1
This Page Intentionally Left Blank
GT 50- OHC Header 1 Magnum, & Control 5 1 1 1 1 (See Exploded View) See Exploded View 8 15 * * 5 ** ** 5 (See Exploded View) 1 1 1 50/ 500- OHC 0 Off AUTO HO 8 ON OFF OFF ON OFF HOLD-OPEN 18 * These parts are included in Item #. ** These parts are included in Item #1. 18 10 1 0 0 0 11 1 5 8 50/500-OHC October, 01 Page H-
Header Item Part Description 1-0101-0X EXTRUSION, ALUM - SWING HEADER TOP -011-0X EXTRUSION, ALUM - SIDE, SWING HEADER 1-050 TOP PIVOT ASSY -15-0X SWING HEADER END CAP 5-1 JAMB DRILLING TEMPLATE -1-0X OHC BASE PIVOT ASSY FGR GUARD-UL PART -15-0X OHC BASE PIVOT ASSY NO FGR GD-UL PART -001-0 SCREW, SET 1/-0 X 1/, KNURL POINT 8-001 PIN, OPERATOR - BASE, HOUSING -1 OPERATOR PIN MODIFIED -010-0X OHC - SNAP IN CHANNEL PIVOT SIDE NO F/G -011-0X OHC - SNAP IN CHANNEL PIVOT SIDE F/G 10-015-0X EXTRUSION, ALUM - SNAP IN DRESS CHANNEL 11-0158-0X OHC - SGL STRIKE BASE -1/ 1-0555 MOUNT, CONTROL BOX 1 1-00 OPERATOR MOUNT FRAME ASSY 1-015-0X OHC SNAP IN DRESS PLATE (. to.1) -01-0X OHC SNAP IN DRESS PLATE (.5 to.5) -01-0X OHC SNAP IN DRESS PLATE (.81 to 8.1) 15-18 LOCK COVER PLATE - BOTTOM 1-001-0 WASHER, /1 ID X 1 OD X.08 THK 1-001-15 HEX JAM NUT /8"-1 18-0011-01 SCREW - PHILLIPS HD MACH #10- X / -0011-1 SCREW - PHILLIPS HD MACH #10- X / 1-055 MOTOR & COUPLING SUB-ASSY - SWINGER 0 1-01-0X OHC - DOOR STOP ASSY - NON PANIC 1 11-00-0X PANIC LATCH ASSY KIT, OHC-UL PART 1-10-0 MAGNUM BOARD IV & CHASIS ASSY 1-00 OPERATOR ONLY - RH SWING - SC 1-005 OPERATOR ONLY LH SWING - SC 1- MICROSWITCH WIRING HARNESS, MAGNUM 5-0011-0 SCREW - PHILLIPS HD MACH #10- X 1-1-0 SCREW, PH FL HD 1/-0 X 1" TRILOBE FORM 1-50 COVER COORDINATED TAPE PKG, OHC - 0 1-51 COVER COORDINATED TAPE PKG, OHC - 1 8 1-1 SCREW, BAG ASSY - OHC 1-1 NAMEPLATE, ADHESIVE BACKED 0-0010-01 SHCS,10- X /8CAD-UL PART 1 1-55 DECAL KIT, SWING HEADER -0018-01 WASHER,.1 ID. OD.0 THK-UL PART 1--0 PROTECTIVE STRIP, BUMP ON 5-/8" LONG 50/500-OHC October, 01 Page H-
Header Item Part Select Finish Description 1-150 OHC - TOP PIVOT/BASE ASY NO F/G 0-UL P 1-151 OHC - TOP PIVOT/BASE ASY NO F/G 1-UL P 1-15 OHC - TOP PIVOT/BASE ASY NO F/G BLK-UL P 1-15 OHC - TOP PIVOT/BASE ASSY F/G 0-UL PRT 1-15 OHC - TOP PIVOT/BASE ASSY F/G 1-UL PRT 1-155 OHC - TOP PIVOT/BASE ASSY F/G BLK-UL PRT 5 1-88-0 MAGNUM SWINGER OPERATOR LH 1-88-08 MAGNUM SWINGER OPERATOR RH 1-88-0 MAGNUM SWINGER OPERATOR LH W/CLUTCH 1-88-10 MAGNUM SWINGER OPERATOR RH W/CLUTCH -1005 HARNESS ASSY - MAGNUM 1- WIRING HARNESS MAGNUM BOARD, POWER 8 10-5 LE RS-11 ON/OFF RCKR SWITCH ASY W/FPLT 10-58 LE RS-1 ON/OFF/HLD OPN RCKR SWITCH ASY 0-1-0 KEY SWITCH KS-1 POSITION 1-0010- SCREW, SOCKET HEAD CAP #10- X /8" -8 SWITCH, ASSY COVER - SWINGER -001-0 SCREW, SET 1/-0 X 5/1, KNURL POINT 1-10 COUPLING, DRIVE 10MM BORE 5-5188 COUPLING, SPYDER -00 COUPLING, SGL PART 50/500-OHC October, 01 Page H-5
GT 50- OHC Pivots Magnum, & Control 1 1 5 1 18 1 8 1 15 11 10 1 0 1 50/500-OHC October, 01 Page H-
Pivots Item Part Select Finish Description 1 1-51 BLOCK, SLIDE - ASSY -1 TRACK, W/TOP PIVOT BLOCK OHC 1-01 BEARING, 1/" X /" X 5/8" WIDE -050 BLOCK - SPACER /8 5-0 SLIDE SPACER, 5/8" TRACK -08 OHC - SPACER, BASE PIVOT -0 OHC - BASE PIVOT 8-00 PIVOT BASE - SELF ALIGNER-UL PART -001-08 WASHER, /1 ID,1/ OD,.01 THK-UL PRT 10-0 COVER - PLATE THRESHOLD 5-1/-UL PART 11-0011-0 SCREW, PH HD MACH 1/-0 X /1 UND ZP 1-0 BASE PIVOT SHAFT SUB-ASSY OHC-UL PART 1-001-0 FHMS,1 X 1 1/" SLOT,TYPE A-UL PART 1 1-1018 ANCHOR - PLASTIC #1 X 1 BLUE-UL PART 15 1-051 RIVNUT, 1/" - 0 TAPPED - ALUMINUM -0011-10 SCREW - PHILLIPS HD MACH 1/-0 X 1 1-8 SCREW, BAG ASSY - OHC TRACK 1-880 TEMPLATE, PREP-DOOR LEAF 1-051 RIVNUT, 1/" - 0 TAPPED - ALUMINUM -0011-10 SCREW - PHILLIPS HD MACH 1/-0 X -0011-1 SCREW -PHLLPS HD MACH 1/-0 X 1 1/ UND -0010-5 SCREW, SOCKET HEAD CAP 1/-0 X 1 1/" -001-05 WASHER,EXT.1/ 1 1-05 OHC TRACK ASSY WITH SCREW BAG ASSY 18 1-008 BTTM PIVOT ASSY, DOOR PORTION, SWG DOOR 1 1-0 BTM PIVOT ASSY, FLOOR PORTION-UL PART 0 1-00 BEARING, BALL - 1.0 X.0 50/500-OHC October, 01 Page H-
Operator 50/500-OHC October, 01 Page H-8
Operator 1 1 15 18 1 5 1 1 8 1 1 1 10 1 11 1 Item Part Description 1-0 OPERATOR HOUSING SWINGER -0 MOUNT, RUBBER -08 BEARING, NEEDLE -015 BEARING, NEEDLE 5-01 BEARING, NEEDLE -01 BEARING, NEEDLE -01 BEARING, BALL 8-0 GEAR PINION - SPIRAL BEVEL, SWING -000-5 PIN, SPIROL 5/ DIA X 1/1 LONG 10 1-111 SHAFT, GEAR SWINGER PINION 11 1-10 COUPLING, DRIVE 10MM BORE 1-001-0 SCREW, SET 1/-0 X 5/1, KNURL POINT 1-000-1 PIN, DOWELL 1/ DIA X /8 LONG 1-5188 COUPLING, SPYDER 15-01 SHIM, 1/ ID X 1 OD X.005 THICK 1-0 "OBSOLETE" SHIM 1/ ID X 1 OD X.00 TCK 1-0 SHIM, 1/ ID X 1 OD X.00 THICK 18 1-15 WASHER, 1/ ID X 1 OD X.010 THK 1-085 OPERATOR SUB-ASSY SWINGER 0-0008 SEAL GARLOCK SWINGER 1-08 WASHER, SPRING THRUST -0-01 SPRING, POWER OPERATOR -00 COUPLING, SGL PART 0 50/500-OHC October, 01 Page H-
Operator 8 18 1 15 1 1 0 1 1 1 5 1 10 1 11 Item Part Description 1-01 BEARING, BALL -01 BEARING, BALL -0 RING, RETAINING -08 RING, RETAINING 5-000 MICROSWITCH -001-1 WASHER, # X 1/ OD X.0 THK NYLON -0010-0 SCREW, SOCKET HEAD CAP 1/-0 X /" 8-0011-0 SCREW - PHILLIPS HD MACH #10- X 1-01 RING, RETAINING 10-0 RING, RETAINING 11-00 USE PN -0 GASKET POWER OPERATOR - SWING 1-1 FIXED CAM PANIC - SWINGER 1-0 CAM, SWITCH - ADJ & FIXED, SWINGER 1-0015-0 RHMS,#- X 1/"PHIL 15-8 SWITCH, ASSY COVER - SWINGER 1-0011-0 SCREW - PHILLIPS HD MACH #10- X 1/ 1-0 LOCK SWITCH CAM 18 1--0 PROTECTIVE STRIP, BUMP ON 5-/8" LONG 1 1-8 MICROSWITCH, SHORT ARM 0-58-01 SCREW, PH RD HD #-0 X / W/# EXT WSR 1-08 OPERATOR HOUSING COVER, SWGR, SWITCH 50/500-OHC October, 01 Page H-10
Operator GT 500 1 1 8 1 15 1 1 1 1 1 18 1 5 8 1 0 1 5 10 11 10 0 1 5 GT 00 1 50/500-OHC October, 01 Page H-11
Operator Item Part Description 1-01 SHAFT, GEAR SUB-ASSY -00 SHAFT, GEAR SUB-ASSY -088 CLUTCH & GEAR SUB-ASSY RH -08 CLUTCH & GEAR ASSY LH -08 SHAFT, GEAR SUB-ASSY 5-05 GEAR W/ARBOR SUB-ASSY RH -0 GEAR W/ARBOR SUB-ASSY LH 1-18-01 O-RING, D -.1 ID x.0 CROSS SECT -1-0 WOODRUFF KEY, 1/8" X 1/" 8-00 GEAR #8, POWER OPERATOR -0-01 GEAR SPIRAL BEVEL 10-01 BEARING, THRUST - RACE ( BULK PACK ) 11-018 BEARING, THRUST 1 1-18-01 O-RING, D -.1 ID x.0 CROSS SECT 1-00 GEAR #, POWER OPERATOR 1-000- PIN, SPIROL /1 DIA X 1-1/L.-UL PART 15-005 GEAR #, POWER OPERATOR 1-00 GEAR #, POWER OPERATOR 1-0 BEARING, THRUST - RACE 18-00 BEARING, THRUST ( BULK PACK ) 1-0 BEARING, THRUST - RACE TRA-10 0-0 BEARING, CLUTCH NEEDLE 1-00 GEAR #5, POWER OPERATOR -05 BEARING, THRUST - RACE -01 BEARING, THRUST -0 BEARING, THRUST - RACE 5-00 RING, RETAINING -00 GEAR #, POWER OPERATOR -1-0 WOODRUFF KEY, 1/8" X 1/" 8-001 GEAR #, POWER OPERATOR -0010-0 SCREW, SOCKET HEAD CAP /8- X 1/"CAD 0-000 GEAR #1, POWER OPERATOR 1-1-0 WOODRUFF KEY, /1" X 5/8" -08 SHAFT, SPRING & GEAR - CENTER SWING -0 RING, RETAINING -000-10 PIN, ROLL 1/ DIA X 1-1/ LONG 5-0 SPRING, SHAFT SWINGER 1-1/" ID -00 WELDED CLUTCH GEAR ASSY OF & 5 1-1 GEAR & CLUTCH SUB-ASSY - RH 1-1 GEAR & CLUTCH ASSY - LH 50/500-OHC October, 01 Page H-1
Control Board 5 & 10 11 8 1 Item Part Description 1-88 CHASSIS, CONTROL -001-1 SCREW - PHLLP PAN HD MACH #10- X 1 1/ -001-0 WASHER,EXT.#10 1-8 SPACER - NYLON #10 X 5/8 /8 OD 5-001-0 HEX NUT #10-11-1080 BRAKE MODULE-MOTOR HARNESS ASSY-SWINGER -800-0 MAGNUM CONTROL BOARD-0 8 1-10 MAG BOARD II & CHASIS / USE 1-10-0 1-10015 FUSE COVER 10 10-05 FUSE, A, AG 11 1-11 1-118 FUSE, AMP 5 FUSE AMP, W/ MAGNUM HEAT SHRINK, OR CONTROL 1-0 FUSE, 5 AMP, MAGNUM A CONTROL 50/500-OHC October, 01 Page H-1