Programme overview Group 5

Programme overview Group 5 5.1 Electromechanical opening system easys for InnoTech 5.1.0-5.1.7 5.2 Double walled drawer system InnoTech i Range summary 5.2.0-5.2.1 5.3 Single-wall steel drawer system MultiTech i Range summary 5.3.1 5.4 Partial and full-extension runners for wooden drawers i Range summary 5.4.1 5.5 Drawer runners for special applications i i Range summary 5.5.1 General information on drawer systems and drawer runners 5.5.9 5.6 Table extension slides i Range summary 5.6.0-5.6.1 Programme overview Group 5 5.0.1

Electromechanical opening system easys for InnoTech Opens drawers as if by magic No problem with easys. No handles, no need to exert force in order to open the pull-outs and certainly no need to bend down. Instead, lots of freedom for both hands. And an outstandingly attractive kitchen design. Which proves that less is indeed more. 5.1.0 Electromechanical opening system easys www.hettich.com

Electromechanical opening system easys for InnoTech With easys, pull-out elements open almost by magic. Gently push or pull any point on the drawer front and the drawer opens gently and noiselessly. If the drawer cannot be opened by hand, because both hands are occupied, wet or dirty, simply tap the drawer front with your knee, foot or hip to open it. An electromechanical drive unit ensures that the drawer opens smoothly. Since drive unit and drawer are not coupled to one another, the freely moving drawer can be stopped at any point. Electromechanical opening system easys 5.1.1

Electromechanical opening system easys for InnoTech easys requires no more than a very short opening stroke. Large reveals are therefore unnecessary between drawer front and cabinet, thus permitting the use of sealing lips. The drawer closes without electromechanical assistance. As usual, the smooth gliding action of the proven Quadro runner technology in combination with dampened closure Silent System ensures that the pull-out closes gently and noiselessly. The drawer can also be opened conventionally should a power outage occur. 5.1.2 Electromechanical opening system easys www.hettich.com

Electromechanical opening system easys for InnoTech easys adds flair to the design options for a perfect kitchen. User convenience is doubled by the combination with handles or decorative profiles. The customer can choose between gently pulling or pressing to open the pull-out. easys also increases the value of a kitchen even as a standalone system. Automatic opening is simply ideal for selected applications, such as particularly large pot-and-pan drawers or drawers for separate collection of waste. The ergonomic aspect additionally comes to bear in the case of plinth drawers and the bottom row of drawers. Comfort can be so easy. Electromechanical opening system easys 5.1.3

Electromechanical opening system easys for InnoTech System components easys can be included in the planning without difficulty. For the system is compactly and slimly concealed behind the rear panel of the drawer. The planned storage space in the drawer or pot-and-pan drawer is retained without restriction. easys is suitable for all widths and depths. Two drive units ensure that large, heavy drawers exeeding 40 kg or wider than 900 mm move easily inside cabinets. The electromechanical opening system easys comprises the following system parts: Drive unit for drawers and pot-and-pan drawers Mounting profile set Mounting set Distribution block Extension lead Power supply unit Mains power cable Power supply unit holder Stop damper for front panel Minimum inside cabinet depth for: InnoTech drawer/pot-and-pan drawer with steel back panel: Nominal length + 30 mm InnoTech drawer/pot-and-pan drawer with wooden back panel: Nominal length + 45 mm 5.1.4 Electromechanical opening system easys www.hettich.com

Electromechanical opening system easys for InnoTech System components! Drive unit For opening the drawer/pot-and-pan drawer Toolless assembly on mounting profiles with automatic power supply Driving force can be adjusted in several stages Two drive units are preferably used per drawer/pot-and-pan drawer for parallel opening in cabinets with a width of more than 900 mm or with drawers weighing more than 40 kg (synchronization can be set on the drive unit) For use in the following countries: Belgium, Bulgaria, Denmark, Germany, Estonia, Finland, France, Greece, Ireland, Italy, Latvia, Liechtenstein, Lithuania, Luxembourg, Malta, Netherlands, Norway, Austria, Poland, Portugal, Romania, Sweden, Switzerland, Slovakia, Slovenia, Spain, Czech Republic, Hungary, United Kingdom, Cyprus other countries on request Order no. PU 9 078 139 1! Mounting profile set For up to 6 drive units Can be shortened as required Aluminium Set contains: 1 pcs mounting profile with integrated power and data cables 1 pcs mounting profile without cables Length mm Order no. PU 750 9 082 353 1 set 1000 9 082 356 1 set Mounting set For securing the mounting profiles to the top and bottom of the cabinet Set contains: 1 pcs mounting profile retainer, bottom, complete with power feeder and 800 mm connecting cable 1 pcs mounting profile, top Order no. PU 9 082 357 1 set! Electromechanical opening system easys 5.1.5

Electromechanical opening system easys for InnoTech System components! Mounting bracket Used instead of the mounting profiles for special installation situations For one drive unit With 800 mm connecting cable Order no. PU 9 082 358 1 Distribution block One distribution block is required per cabinet! Order no. PU 9 082 360 1 Extension lead For connecting from one distribution block to the next Length 1500 mm! Order no. PU 9 082 362 1! Power supply unit 100-240 V, 50-60 Hz For operation of up to max. 6 cabinets Safety class 2 1200 mm secondary cable to the first distribution block Mains power cable needs to be ordered separately Order no. PU 9 082 363 1 5.1.6 Electromechanical opening system easys www.hettich.com

Electromechanical opening system easys for InnoTech System components Mains power cable Length 1800 mm! Mains power cable Order no. PU Euro Connector 9079710 1 UK plug connector type G 9 079 274 1! Power supply unit holder For mounting on the wall or bottom of the cabinet Order no. PU 9 082 364 1 Stop damper for front panel Ensures the required activating travel 4 pcs needs to be mounted per drawer for front panel heights of more than 300 mm! Assembly Order no. PU for drilling into the drawer front 9 082 365 2 for drilling into the cabinet side 9 082 366 2! External sensor For reliable activation with very high drawer fronts Order no. PU 9 079 944 1 Electromechanical opening system easys 5.1.7

Range summary 5.2 Double walled drawer system InnoTech i InnoTech surprisingly versatile 5.2.2-5.2.5 Planning a kitchen with Intelligent Kitchens 5.2.6-5.2.13 5.2.0 Double walled drawer system InnoTech www.hettich.com

i Range summary 5.2 Double walled drawer system InnoTech Ordering made easy InnoTech Quickfinder 5.2.14-5.2.19 InnoTech Range summary 5.2.20-5.2.21 Double walled drawer system InnoTech 5.2.1

Double walled drawer system InnoTech Drawer silver steel anthracite steel stainless steel brushed solid beech Drawers/pot-and-pan drawers define the character and quality looks of a kitchen in a particular way. Surprise your clients with something they won't be expecting! The InnoTech drawer system adds visual and practical highlights behind cabinet fronts. Higher and higher: InnoTech has the right answer to any storage situation. Four standard configurations provide tremendous flexibility when it comes to optimising the use of space. These are available: Drawer profiles in a height of 54 mm Drawer profiles in a height of 70 mm Pot-and-pan drawers in a height of 144 mm and Pot-and-pan drawers in a height of 176 mm Drawer runner Quadro drawer runners with Silent System close drawers and pot-and-pan drawers gently and quietly. Silent System perfectly controlled closure! 5.2.2 Double walled drawer system InnoTech www.hettich.com

Double walled drawer system InnoTech in steel, silver in plastic with glass without TopSide The many different components can easily be combined to create attractive, fascinating and unique compositions. InnoTech lets you present ideas that bear fruit in everyday kitchen use. Innovations Design freedom InnoTech offers a range of depths that's nothing short of impressive! Available in seven standard depths of 260 to 620 mm, InnoTech caters to any application. Versatile organiser systems give you flexibility in tailoring drawer space to suit your needs. OrgaWing OrgaFlex drawer for sink units XL plinth drawer Double walled drawer system InnoTech 5.2.3

Double walled drawer system InnoTech InnoTech in the bathroom The different material types and surface finishes of InnoTech drawer profiles provide an impressive choice of options, not only in the kitchen. High-quality bathrooms benefit in just the same way from the advantages of the InnoTech system and guarantee huge potential when it comes to standing apart behind the furniture front. 5.2.4 Double walled drawer system InnoTech www.hettich.com

Double walled drawer system InnoTech Creating dream bathrooms the InnoTech range also provides a wealth of different options for realising refreshing design ideas in the bathroom and combining them with plenty of convenience and clever organisation. Double walled drawer system InnoTech 5.2.5

Intelligent Kitchens 5.2.6 Intelligent Kitchens www.hettich.com

Intelligent Kitchens making kitchens a joy! Recipes for added convenience in the kitchen Why should a kitchen be intelligent? Because only a cleverly planned kitchen is a really good kitchen. Because there's plenty a perfectly organised kitchen can do: greatly reduce the time and effort involved in cooking, optimise the use of storage space, cut physical strain and a whole lot more. Intelligent Kitchens from Hettich shows how it's done. www.intelligent-kitchens.com Intelligent Kitchens 5.2.7

Intelligent Kitchens Intelligent Kitchens works in every kitchen! Intelligent Kitchens makes every kitchen an intelligent kitchen. Pots and pans Cleaning and waste Food preparation China and cutlery What does it look like in your kitchen cupboards? Well organised and tidy, of course. Intelligent Kitchens brings organisation to your kitchen. Because perfectly organised, half the cooking's already done. Keeping the important things exactly where they are needed makes light work of jobs in the kitchen. Intelligent Kitchens logically organises a kitchen into five theme-based activity areas. 5.2.8 Intelligent Kitchens www.hettich.com

Intelligent Kitchens Planning a kitchen with Intelligent Kitchens We will show you how to apply Intelligent Kitchens on the basis of different kitchen layouts. This way, you will know from the outset how every kitchen unit and drawer can be fitted out to create effective furniture for each activity zone. Single-galley kitchen Double-galley kitchen L-shaped kitchen U-shaped kitchen Food storage G-shaped kitchen Island kitchen Intelligent Kitchens provably ensures efficient, non-crossing workflows and short walking distances. Putting you in control of cooking in record time logically arranged, well organised and in easy reach. Intelligent Kitchens more time to enjoy. www.intelligent-kitchens.com Intelligent Kitchens 5.2.9

Intelligent Kitchens Food storage The ideal place for provisions: Out of the way yet always to hand. InnoTech drawers/pot-and-pan drawers, range summary, page 5.2.20-5.2.21 InnoTech Pantry unit, page 5.2.62 Dispensa Pantry unit, page 9.1.95 Arena CLASSIC drawers, see page 9.1.22 Many items stored away, yet with everything in view and easily reached: Storage and pantry units with convenient pull-outs. Organised and clearly in view right to the very back: Fully extending pull-out elements or drawers with versatile internal organisers. InnoTech storage unit, page 5.2.64 5.2.10 Intelligent Kitchens www.hettich.com

Intelligent Kitchens Food preparation Always in reach when preparing meals: Food and cooking utensils are ideally stored near the cooker or below the hob. Front pull-outs for unit width of 150 mm, see page 9.1.17 All utensils neatly stored away and in easy reach: Thanks to perfect organisation in the midway section too. Ideal for everything you need for cooking: Flexible compartments and pull-outs near the hob. Cosario, page 9.1.122 OrgaTray Basic, see page 5.2.79 OrgaTray DeLuxe, see page 5.2.92 Intelligent Kitchens 5.2.11

Intelligent Kitchens Pots and pans Ergonomic, convenient storage: superior solutions for pots and pans. OrgaFlag, page 5.2.99 Pot-and-pan-drawers perfectly organised: Keeping saucepans and lids in place. Corner units fully under control with LeMans the curvaceous star among corner-unit fittings. LeMans, page 9.1.49 Cleaning and waste Next to and under the sink: space that's a shame to leave unused. Special under-sink pull-outs utilise spaces otherwise wasted and keep cleaning products quick to hand. Waste sorting systems, see page 9.1.65 OrgaFlex, see page 5.2.106 5.2.12 Intelligent Kitchens www.hettich.com

Intelligent Kitchens China and cutlery How to store stacks of china and cutlery. Convenient, variable, stable, strong: drawers with high-level sides give even heavy stacks of plates the hold they need. Space that adapts to the items it holds: drawers with variable cutlery trays create space for a wide range of cutlery and utensils. Dish drainer system, page 9.1.130 OrgaStore Exclusiv, page 5.2.103 OrgaTray Premium, see page 5.2.88 OrgaTray Exclusiv, see page 5.2.90 Intelligent Kitchens 5.2.13

Double walled drawer system InnoTech for variable drawer widths Quickfinder Description Nominal length Height 54 mm Height 70 mm mm powder-coated steel powder-coated steel stainless steel beech silver anthracite silver anthracite brushed lacquered InnoTech drawer profile system for variable drawer/ pot-and-pan drawer widths Front connectors With expanding dowel Screw-on Rear panel for cutting to size Corner clip for wooden rear panel 260 0 077 905 9 078 994 0 040 450 0 042 727 300 9 078 993 9 078 995 9 079 6 350 0 077 906 9 078 996 0 040 451 0 042 728 420 0 077 907 9 078 997 0 040 452 0 042 729 470 9 079 029 9 079 037 0 077 908 9 078 998 0 040 453 0 042 731 520 0 077 909 9 079 021 0 040 454 0 042 732 620 0 079 557 9 079 023 0 040 455 0 042 733 0 077 911 0 077 911 0 077 911 0 077 911 0 077 911 0 077 911 0 077 910 0 077 910 0 077 910 0 077 910 0 077 910 0 077 910 0 077 913 9 079 026 9 080 221 0045597 Quadro drawer slides Nominal Quadro V6 Silent System Quadro V6 Stop Control length mm EB 12,5 EB 10,5 EB 9,5 EB 12,5 EB 10,5 EB 9,5 PU 1 set PU 10 sets PU 1 set PU 10 sets PU 1 set PU 10 sets PU 1 set PU sets PU 1 set PU sets PU 1 set PU sets 260 0 045 298 9 079 636 0 045 304 9 079 654 0 045 309 9 079 668 0 072 911 9 079 677 0 072 998 9 079 683 0 073 273 9 079 689 300 9079229 9079638 9079230 9079656 9079231 9079670 350 0 045 299 9 079 640 0 045 305 9 079 659 0 045 310 9 079 671 0 078 505 9 079 678 0 079 002 9 079 684 0 079 003 9 079 690 420 0 045 301 9 079 641 0 045 306 9 079 662 0 045 311 9 079 672 0 073 271 9 079 679 0 072 999 9 079 686 0 073 274 9 079 691 470 0 045 302 9 079 643 0 045 307 9 079 665 0 045 312 9 079 673 0 073 056 9 079 680 0 073 272 9 079 687 0 073 275 9 079 692 520 0 045 303 9 079 652 0 045 308 9 079 666 0 045 313 9 079 675 0 078 508 9 079 681 0 078 509 9 079 688 0 078 510 9 079 693 620 5.2.14 Double walled drawer system InnoTech www.hettich.com

Double walled drawer system InnoTech for variable drawer widths Quickfinder Height 144 mm Height 176 mm powder-coated steel stainless steel beech powder-coated steel stainless steel silver anthracite brushed lacquered silver anthracite brushed 9 079 039 9 079 045 9 079 591 0 042 727 + 9 079 620 9 079 089 9 079 092 9 079 604 9 079 042 9 079 047 9 079 6 + 9 079 621 9 079 090 9 079 094 0 013 218 9 079 050 0 040 456 0 042 728 + 9 079 625 0 044 223 9 079 104 9 079 608 0 013 219 9 079 051 0 040 457 0 042 729 + 9 079 627 0 044 224 9 079 105 9 079 609 0 013 220 9 079 053 0 040 458 0 042 731 + 9 079 629 0 044 225 9 079 107 9 079 611 0 013 221 9 079 060 0 040 459 0 042 732 + 9 079 631 0 044 226 9 079 109 9 079 612 0 013 222 9 079 063 0 040 460 0 042 733 + 9 079 634 0 044 323 9 079 110 9 079 613 0 077 911 0 077 911 0 077 911 0 077 911 0 077 911 0 077 911 0 077 911 0 077 910 0 077 910 0 077 910 0 077 910 0 077 910 0 077 910 0 077 910 0 013 225 9 079 084 9 080 222 0045598 Nominal Quadro V6+ Silent System Quadro V8 Silent System Quadro 30 Stop Control length mm EB 12,5 EB 10,5 EB 9,5 EB 12,5 EB 10,5/9,5 EB 12,5 EB 10,5 EB 9,5 PU 1 set PU 8 sets PU 1 set PU 8 sets PU 1 set PU 8 sets PU 1 set PU 1 set PU 19 sets PU 19 sets PU 19 sets 260 9079087 9079106 9079121 300 9 079 070 9 079 694 9 079 077 9 079 049 9 079 081 9 079 059 350 9 079 074 9 079 697 9 079 079 9 079 054 9 079 083 9 079 061 9 079 096 9 079 111 9 079 123 420 0 048 354 9 079 698 0 048 357 9 079 055 0 048 360 9 079 062 9 079 097 9 079 113 9 079 124 470 0 048 355 9 079 699 0 048 358 9 079 056 0 048 361 9 079 065 0 044 976 0 046 689 9 079 101 9 079 1 9 079 127 520 0 048 356 9 079 032 0 048 359 9 079 057 0 048 362 9 079 067 0 044 979 0 046 691 9 079 103 9 079 117 9 079 129 620 0 040 269 9 079 044 0 040 270 9 079 058 0 040 271 9 079 068 0 044 983 0 046 692 Double walled drawer system InnoTech 5.2.15

Double walled drawer system InnoTech for variable internal drawer widths Quickfinder Description Nominal length Internal drawer Basic, Internal drawer Exclusiv, mm height 70 mm height 70 mm powder-coated steel powder-coated steel stainless steel beech silver silver anthracite brushed lacquered InnoTech drawer 260 0 077 905 9 078 994 0 040 450 0 042 727 profile system for 300 9 078 993 9 078 995 9 079 6 variable internal drawer/pot-and-pan 350 0 077 906 0 077 906 9 078 996 0 040 451 0 042 728 drawer widths 420 0 077 907 0 077 907 9 078 997 0 040 452 0 042 729 470 0 077 908 0 077 908 9 078 998 0 040 453 0 042 731 520 0 077 909 0 077 909 9 079 021 0 040 454 0 042 732 620 0 079 557 0 079 557 9 079 023 0 040 455 0 042 733 Rear panel for cutting to size 0 077 913 0 077 913 9 079 026 9 080 221 Corner clip for wooden rear panel 0 045 597 Description Cabinet width grey plastic/ satin glass mm aluminium silver anodised Front panels Customised cabinet widths 300 0 041 720 9 079 143 400 0 041 722 9 079 145 450 9 079 112 9 079 147 500 0 041 730 9 079 148 550 9 079 309 + Corner clip for drawer front Exclusiv, 600 0 041 740 9 079 310 see below 800 0 041 750 9 079 311 900 0 041 752 9 079 312 1000 0 041 753 9 079 313 1200 9 079 114 9 079 314 0 044 925 + 0 044 926 Description Corner clip for drawer front Exclusiv Finish aluminium finish - 9 079 115 stainless steel finish - 9 079 125 Quadro drawer slides Nominal Quadro V6 Silent System Quadro V6 Stop Control length mm EB 12,5 EB 10,5 EB 9,5 EB 12,5 EB 10,5 EB 9,5 PU 1 set PU 10 sets PU 1 set PU 10 sets PU 1 set PU 10 sets PU 1 set PU sets PU 1 set PU sets PU 1 set PU sets 260 0 045 298 9 079 636 0 045 304 9 079 654 0 045 309 9 079 668 0 072 911 9 079 677 0 072 998 9 079 683 0 073 273 9 079 689 300 9079229 9079638 9079230 9079656 9079231 9079670 350 0 045 299 9 079 640 0 045 305 9 079 659 0 045 310 9 079 671 0 078 505 9 079 678 0 079 002 9 079 684 0 079 003 9 079 690 420 0 045 301 9 079 641 0 045 306 9 079 662 0 045 311 9 079 672 0 073 271 9 079 679 0 072 999 9 079 686 0 073 274 9 079 691 470 0 045 302 9 079 643 0 045 307 9 079 665 0 045 312 9 079 673 0 073 056 9 079 680 0 073 272 9 079 687 0 073 275 9 079 692 520 0 045 303 9 079 652 0 045 308 9 079 666 0 045 313 9 079 675 0 078 508 9 079 681 0 078 509 9 079 688 0 078 510 9 079 693 620 5.2. Double walled drawer system InnoTech www.hettich.com

Double walled drawer system InnoTech for variable internal pot-and-pan drawer widths Quickfinder Internal drawer Basic, Internal drawer Exclusiv, height 144 mm height 144 mm powder-coated steel powder-coated steel stainless steel beech silver silver anthracite brushed lacquered 9 079 039 9 079 045 9 079 591 0 042 727 + 9 079 620 9 079 042 9 079 047 9 079 6 + 9 079 621 9 082 451 0 013 218 9 079 050 0 040 456 0 042 728 + 9 079 625 9 082 450 0 013 219 9 079 051 0 040 457 0 042 729 + 9 079 627 9 082 448 0 013 220 9 079 053 0 040 458 0 042 731 + 9 079 629 9 082 446 0 013 221 9 079 060 0 040 459 0 042 732 + 9 079 631 9 079 325 0 013 222 9 079 063 0 040 460 0 042 733 + 9 079 634 0 013 225 0 013 225 9 079 084 9 080 222 0 045 598 grey plastic/ aluminium silver anodised satin glass 0 041 756 9 079 362 0 041 760 9 079 366 9 079 327 9 079 372 0 041 770 9 079 374 9 079 376 + Corner clip for drawer front Exclusiv, 0 041 780 9 079 378 see below 0 041 782 9 079 385 0 041 790 9 079 387 0 041 793 9 079 388 9 079 328 9 079 389 0 044 925 + 0 046 733 + 0 077 924 9 079 329 9 079 330 Nominal Quadro V6+ Silent System Quadro V8 Silent System Quadro 30 Stop Control length mm EB 12,5 EB 10,5 EB 9,5 EB 12,5 EB 10,5/9,5 EB 12,5 EB 10,5 EB 9,5 PU 1 set PU 8 sets PU 1 set PU 8 sets PU 1 set PU 8 sets PU 1 set PU 1 set PU 19 sets PU 19 sets PU 19 sets 260 9079087 9079106 9079121 300 9 079 070 9 079 694 9 079 077 9 079 049 9 079 081 9 079 059 350 9 079 074 9 079 697 9 079 079 9 079 054 9 079 083 9 079 061 9 079 096 9 079 111 9 079 123 420 0 048 354 9 079 698 0 048 357 9 079 055 0 048 360 9 079 062 9 079 097 9 079 113 9 079 124 470 0 048 355 9 079 699 0 048 358 9 079 056 0 048 361 9 079 065 0 044 976 0 046 689 9 079 101 9 079 1 9 079 127 520 0 048 356 9 079 032 0 048 359 9 079 057 0 048 362 9 079 067 0 044 979 0 046 691 9 079 103 9 079 117 9 079 129 620 0 040 269 9 079 044 0 040 270 9 079 058 0 040 271 9 079 068 0 044 983 0 046 692 Double walled drawer system InnoTech 5.2.17

Double walled drawer system InnoTech for standard cabinet widths Quickfinder Description Cabinet Preassembled drawer, Preassembled internal drawer Basic, Preassembled internal drawer Exclusiv, width height 70 mm height 70 mm height 70 mm mm Nominal length mm Nominal length mm Nominal length mm 420 470 520 420 470 520 420 470 520 Preassembled drawer/ pot-and-pan drawer 275 0 078 400 0 078 408 0 078 4 - - - - - - 300 0 078 401 0 078 409 0 078 417 0 078 401 0 078 409 0 078 417 0 078 401 0 078 409 0 078 417 350 0 078 402 0 078 410 0 078 418 - - - - - - Front connectors With expanding dowel Screw-on 400 0 078 403 0 078 411 0 078 419 0 078 403 0 078 411 0 078 419 0 078 403 0 078 411 0 078 419 450 0 078 404 0 078 412 0 078 420 0 078 404 0 078 412 0 078 420 0 078 404 0 078 412 0 078 420 500 0 078 405 0 078 413 0 078 421 0 078 405 0 078 413 0 078 421 0 078 405 0 078 413 0 078 421 550 0 078 406 0 078 414 0 078 422 0 078 406 0 078 414 0 078 422 600 0 078 407 0 078 415 0 078 423 0 078 407 0 078 415 0 078 423 0 078 407 0 078 415 0 078 423 800 0 013 248 0 013 252 0 013 248 0 013 252 0 013 248 0 013 252 900 0 013 249 0 013 253 0 013 249 0 013 253 0 013 249 0 013 253 1000 0 013 250 0 013 254 0 013 250 0 013 254 0 013 250 0 013 254 1200 0 013 251 0 013 255 0 013 251 0 013 255 0 013 251 0 013 255 0 077 911 0 077 911 0 077 911 0 077 910 0 077 910 0 077 910 Description Cabinet aluminium silver anodised/ satin glass width grey plastic mm Front panel 300 0 041 720 0 041 720 0 041 720 9 079 143 9 079 143 9 079 143 400 0 041 722 0 041 722 0 041 722 9 079 145 9 079 145 9 079 145 450 9 079 112 9 079 112 9 079 112 9 079 147 9 079 147 9 079 147 500 0 041 730 0 041 730 0 041 730 9 079 148 9 079 148 9 079 148 550 9 079 309 9 079 309 9 079 309 600 0 041 740 0 041 740 0 041 740 9 079 310 9 079 310 9 079 310 800 0 041 750 0 041 750 0 041 750 9 079 311 9 079 311 9 079 311 900 0 041 752 0 041 752 0 041 752 9 079 312 9 079 312 9 079 312 1000 0 041 753 0 041 753 0 041 753 9 079 313 9 079 313 9 079 313 1200 9 079 114 9 079 114 9 079 114 9 079 314 9 079 314 9 079 314 Longitudinal railing for internal drawer Basic Corner clip for drawer front Exclusiv, aluminium finish 9 079 115 9 079 115 9 079 115 Quadro drawer slides Nominal Quadro V6 Silent System Quadro V6 Stop Control length mm EB 12,5 EB 10,5 EB 9,5 EB 12,5 EB 10,5 EB 9,5 PU 1 set PU 10 sets PU 1 set PU 10 sets PU 1 set PU 10 sets PU 1 set PU sets PU 1 set PU sets PU 1 set PU sets 420 0 045 301 9 079 641 0 045 306 9 079 662 0 045 311 9 079 672 0 073 271 9 079 679 0 072 999 9 079 686 0 073 274 9 079 691 470 0 045 302 9 079 643 0 045 307 9 079 665 0 045 312 9 079 673 0 073 056 9 079 680 0 073 272 9 079 687 0 073 275 9 079 692 520 0 045 303 9 079 652 0 045 308 9 079 666 0 045 313 9 079 675 0 078 508 9 079 681 0 078 509 9 079 688 0 078 510 9 079 693 5.2.18 Double walled drawer system InnoTech www.hettich.com

Double walled drawer system InnoTech for standard cabinet widths Quickfinder Preassembled pot-and-pan drawer, Preassembled internal pot-and-pan drawer Preassembled internal pot-and-pan drawer height 144 mm Basic, height 144 mm Exclusiv, height 144 mm Nominal length mm Nominal length mm Nominal length mm 420 470 520 420 470 520 420 470 520 0 013 256 0 013 264 0 013 276 - - - - - - 0 013 257 0 013 265 0 013 277 0 013 257 0 013 265 0 013 277 0 013 257 0 013 265 0 013 277 0 013 258 0 013 266 0 013 278 - - - - - - 0 013 259 0 013 267 0 013 279 0 013 259 0 013 267 0 013 279 0 013 259 0 013 267 0 013 279 0 013 260 0 013 268 0 013 280 0 013 260 0 013 268 0 013 280 0 013 260 0 013 268 0 013 280 0 013 261 0 013 269 0 013 281 0 013 261 0 013 269 0 013 281 0 013 261 0 013 269 0 013 281 0 013 262 0 013 270 0 013 282 0 013 262 0 013 270 0 013 282 0 013 263 0 013 271 0 013 283 0 013 263 0 013 271 0 013 283 0 013 263 0 013 271 0 013 283 0 013 272 0 013 284 0 013 272 0 013 284 0 013 272 0 013 284 0 013 273 0 013 285 0 013 273 0 013 285 0 013 273 0 013 285 0 013 274 0 013 286 0 013 274 0 013 286 0 013 274 0 013 286 0 013 275 0 013 287 0 013 275 0 013 287 0 013 275 0 013 287 0 077 911 0 077 911 0 077 911 0 077 910 0 077 910 0 077 910 aluminium silver anodised/ grey plastic satin glass 0 041 756 0 041 756 0 041 756 9 079 362 9 079 362 9 079 362 0 041 760 0 041 760 0 041 760 9 079 366 9 079 366 9 079 366 9 079 327 9 079 327 9 079 327 9 079 372 9 079 372 9 079 372 0 041 770 0 041 770 0 041 770 9 079 374 9 079 374 9 079 374 9 079 376 9 079 376 9 079 376 0 041 780 0 041 780 0 041 780 9 079 378 9 079 378 9 079 378 0 041 782 0 041 782 0 041 782 9 079 385 9 079 385 9 079 385 0 041 790 0 041 790 0 041 790 9 079 387 9 079 387 9 079 387 0 041 793 0 041 793 0 041 793 9 079 388 9 079 388 9 079 388 9 079 328 9 079 328 9 079 328 9 079 389 9 079 389 9 079 389 9 079 4 0 047 311 0 047 290 9 079 329 9 079 329 9 079 329 Nominal Quadro V6+ Silent System Quadro V8 Silent System Quadro 30 Stop Control length mm EB 12,5 EB 10,5 EB 9,5 EB 12,5 EB 10,5/9,5 EB 12,5 EB 10,5 EB 9,5 PU 1 set PU 8 sets PU 1 set PU 8 sets PU 1 set PU 8 sets PU 1 set PU 1 set PU 19 sets PU 19 sets PU 19 sets 420 0 048 354 9 079 698 0 048 357 9 079 055 0 048 360 9 079 062 9 079 097 9 079 113 9 079 124 470 0 048 355 9 079 699 0 048 358 9 079 056 0 048 361 9 079 065 0 044 976 0 046 689 9 079 101 9 079 1 9 079 127 520 0 048 356 9 079 032 0 048 359 9 079 057 0 048 362 9 079 067 0 044 979 0 046 691 9 079 103 9 079 117 9 079 129 Double walled drawer system InnoTech 5.2.19

Range summary Double walled drawer system InnoTech i Material/Finish Powder-coated steel, silver Powder-coated steel, anthracite Stainless steel brushed Can be used as Drawer/pot-and-pan drawer Internal drawer/internal pot-and-pan drawer InnoTech Set pack 5.2.22 5.2.37 Material/Finish Powder-coated steel, silver Can be used as Drawer/pot-and-pan drawer Internal drawer/internal pot-and-pan drawer InnoTech Preassembled drawers 5.2.38 5.2.51 Material/Finish Powder-coated steel, silver Powder-coated steel, anthracite Can be used as Drawer/pot-and-pan drawer Internal drawer/internal pot-and-pan drawer InnoTech bulk packing 5.2.52 5.2.55 Material/Finish Beech lacquered Can be used as Drawer/pot-and-pan drawer Internal drawer/internal pot-and-pan drawer InnoTech wood 5.2.56 5.2.61 5.2.20 Double walled drawer system InnoTech www.hettich.com

i Range summary Double walled drawer system InnoTech Push-To-Open InnoTech pantry/storage cabinet Mounting examples 5.2.62-5.2.64 Quadro drawer slides/drawer opening system Push-To-Open Range summary 5.2.65 Accessories side stabiliser, anti-tilt block, front stabiliser, front angle, drawer bottom panels, stop attachments 5.2.72-5.2.75 InnoTech organisation for (internal) drawers and (internal) pot-and-pan drawers Range summary 5.2.76-5.2.77 InnoTech drawers for undersink cabinets 5.2.106-5.2.109 InnoTech preassembled electrical appliance drawer 5.2.110 InnoTech preassembled XXL drawer 5.2.111 InnoTech under-oven drawers 5.2.112-5.2.114 InnoTech waste sorting systems Range summary 5.2.115 Technical information see pages 5.2.1-5.2.123 Double walled drawer system InnoTech 5.2.21

Double walled steel/stainless steel drawer system InnoTech for variable drawer widths Height 70 mm Quick insertion and removal of the drawer No bottom panel machining Toolless assembly/disassembly and convenient front panel adjustment Perfect drawer action with Quadro partial or full extension; optionally with Silent System for closing quietly and gently adapted to the thickness of the cabinet sides with, 18 and 19 mm The following components are all you need for assembling an InnoTech wooden drawer: Drawer set, height 70 mm + Front connectors with expanding dowel or to screw-on + Rear panel of aluminium or wood, mm + Quadro drawer slides see page 5.2.65 + Bottom panel, mm Drawer set, height 70 mm contains: 1 set drawer profiles, steel/stainless steel 1 set back panel connectors, steel 2 pcs cover caps with Hettich logo Pan-head screws ø 3,5 x 12 mm Nominal Order no. PU length mm powder-coated steel stainless steel silver anthracite brushed 260 0 077 905 9 078 994 0 040 450 1 set 300 9 078 993 9 078 995 1 set 350 0 077 906 9 078 996 0 040 451 1 set 420 0 077 907 9 078 997 0 040 452 1 set 470 0 077 908 9 078 998 0 040 453 1 set 520 0 077 909 9 079 021 0 040 454 1 set 620 0 079 557 9 079 023 0 040 455 1 set Cover caps with customised imprint available on request Front connectors White plastic Assembly Order no. PU A With expanding dowel 0 077 911 1/40 B Screw-on 0 077 910 1/40 A B Fixing with countersunk chipboard screw ø 3,5 mm Aluminium back panel Custom length Length 2000 mm Pan-head screws ø 3,5 x 20 mm Powder-coated Finish Order no. PU silver 0 077 913 1 anthracite 9 079 026 1 Technical information see page 5.2.1 5.2.22 Double walled drawer system InnoTech www.hettich.com

Double walled steel/stainless steel drawer system InnoTech for variable drawer widths Height 70 mm Quadro V6 Silent System/ Quadro V6 Full-extension Load capacity 30 kg Quadro V6+ Silent System Full-extension Load capacity 50 kg Quadro V8 Silent System Full-extension Load capacity 70 kg Quadro 30 Part-extension Load capacity 30 kg Hole positions for Quadro/ minimum installation height For further details see page 5.2.66-5.2.70 ø4 ø6,3 97 12 9,5 36 70 ø4 ø6,3 103 12 9,5 42 70 ø4 ø6,3 108 12 9,5 47 12 70 ø4 ø6,3 94 9,5 33 70 ø3,5x12 ø3,5x12 ø3,5x12 ø3,5x12 Hole positions for front connectors A 2x ø10x12,5 A 2x ø10x12,5 A 2x ø10x12,5 A 2x ø10x12,5 40,5 4,5 32 14 32 4,5 14 46,5 51,5 4,5 32 14 32 4,5 14 37,5 KD EB KD EB KD EB KD EB From a cabinet width of 800 mm, we recommend use of the Quadro V6+ or Quadro V8 By varying the Quadro installation width (EB), 3 different cabinet side panel thicknesses (KD) can be accommodated without changing the drawer dimensions. The following dimensions apply (mm): 23 18 21 19 20 Cabinet thickness (KD) 18 19 Quadro installation width (EB) 12,5 10,5 9,5 Dimension A 23 21 20 12,5 10,5 9,5 Dimensions LT NL C Wooden rear panel Aluminium rear panel B LB LB = inside cabinet width NL = nominal length LT = min. interior cabinet depth, depending on the Quadro used Size Wooden rear panel Aluminium rear panel A Bottom panel depth NL + 10 NL - 3 B Bottom panel width LB - 2 x EB - 51,5 LB - 2 x EB - 51,5 C Rear panel width LB - 2 x EB - 63 LB - 2 x EB - 63 D Rear panel height 65,5 A D 9 65,5 38 10 2x ø3,5x12 ø3,5x20 Dimensions Order no. PU mm ø 3,5 x 12 0 045 7 200 ø 3,5 x 20 0 045 8 200 Processing technology see group 2 Double walled drawer system InnoTech 5.2.23

Double walled steel drawer system InnoTech for variable drawer widths Height 54 mm Quick insertion and removal of the drawer No bottom panel machining Toolless assembly/disassembly and convenient front panel adjustment Perfect drawer action with Quadro partial or full extension; optionally with Silent System for closing quietly and gently adapted to the thickness of the cabinet sides with, 18 and 19 mm The following components are all you need for assembling an InnoTech wooden drawer: Drawer set, height 54 mm + Front connectors with expanding dowel or to screw-on + Quadro drawer slides see page 5.2.65 + Bottom and rear panel, mm Drawer set, height 54 mm contains: 1 set drawer profiles, powder-coated steel 1 set back panel connectors, powder-coated steel 2 pcs cover caps with Hettich logo Pan-head screws ø 3,5 x 12 mm Nominal length Order no. PU mm silver anthracite 470 9 079 029 9 079 037 1 set Cover caps with customised imprint available on request Front connectors White plastic Assembly Order no. PU A With expanding dowel 0 077 911 1/40 B Screw-on 0 077 910 1/40 A B Fixing with countersunk chipboard screw ø 3,5 mm Technical information see page 5.2.1 5.2.24 Double walled drawer system InnoTech www.hettich.com

Double walled steel drawer system InnoTech for variable drawer widths Height 54 mm Quadro V6 Silent System/ Quadro V6 Full-extension Load capacity 30 kg Quadro V6+ Silent System Full-extension Load capacity 50 kg Quadro V8 Silent System Full-extension Load capacity 70 kg Quadro 30 Part-extension Load capacity 30 kg Hole positions for Quadro/ minimum installation height For further details see page 5.2.66-5.2.70 81 36 ø4 ø6,3 12 9,5 54 ø4 ø6,3 12 87 9,5 42 54 ø4 ø6,3 92 12 9,5 47 12 54 ø4 ø6,3 54 78 9,5 33 ø3,5x12 ø3,5x12 ø3,5x12 ø3,5x12 Hole positions for front connectors A 2x ø10x12,5 A 2x ø10x12,5 A 2x ø10x12,5 A 2x ø10x12,5 40,5 4,5 32 14 4,5 32 14 46,5 32 4,5 14 51,5 32 4,5 14 37,5 KD EB KD EB KD EB KD EB From a cabinet width of 800 mm, we recommend use of the Quadro V6+ or Quadro V8 By varying the Quadro installation width (EB), 3 different cabinet side panel thicknesses (KD) can be accommodated without changing the drawer dimensions. The following dimensions apply (mm): 23 18 21 19 20 Cabinet thickness (KD) 18 19 Quadro installation width (EB) 12,5 10,5 9,5 Dimension A 23 21 20 12,5 10,5 9,5 Dimensions LT Wooden rear panel NL C LB = inside cabinet width NL = nominal length LT = min. interior cabinet depth, depending on the Quadro used Size Wooden rear panel A Bottom panel depth NL + 10 B Bottom panel width LB - 2 x EB - 51,5 C Rear panel width LB - 2 x EB - 63 D Rear panel height 53 B LB A D 9 38 53 10 2x ø3,5x12 Dimensions Order no. PU mm ø 3,5 x 12 0 045 7 200 ø 3,5 x 20 0 045 8 200 Processing technology see group 2 Double walled drawer system InnoTech 5.2.25

Double walled steel/stainless steel drawer system InnoTech for variable pot-and-pan drawer widths Height 144 mm Quick insertion and removal of the pot-and-pan drawer No bottom panel machining Toolless assembly/disassembly and convenient front panel adjustment Perfect drawer action with Quadro partial or full extension; optionally with Silent System for closing quietly and gently adapted to the thickness of the cabinet sides with, 18 and 19 mm The following components are all you need for assembling an InnoTech pot-and-pan drawer: Pot-and-pan drawer set, height 144 mm + Front connectors with expanding dowel or to screw-on Rear panel of aluminium or wood, mm + Quadro drawer slides see page 5.2.65 + Bottom panel, mm Pot-and-pan drawer set, height 144 mm contains: 1 set drawer profiles, steel/stainless steel 1 set back panel connectors, steel 2 lengthwise railings, steel/stainless steel including front connectors 2 pcs cover caps with Hettich logo Pan-head screws ø 3,5 x 12 mm Nominal Order no. PU length mm powder-coated steel stainless steel silver anthracite brushed 260 9 079 039 9 079 045 9 079 591 1 set 300 9 079 042 9 079 047 1 set 350 0 013 218 9 079 050 0 040 456 1 set 420 0 013 219 9 079 051 0 040 457 1 set 470 0 013 220 9 079 053 0 040 458 1 set 520 0 013 221 9 079 060 0 040 459 1 set 620 0 013 222 9 079 063 0 040 460 1 set Cover caps with customised imprint available on request Front connectors White plastic Assembly Order no. PU A With expanding dowel 0 077 911 1/40 B Screw-on 0 077 910 1/40 A B Fixing with countersunk chipboard screw ø 3,5 mm Aluminium back panel Custom length Length 2000 mm Pan-head screws ø 3,5 x 20 mm Powder-coated Finish Order no. PU silver 0 013 225 1 anthracite 9 079 084 1 Technical information see page 5.2.1 5.2.26 Double walled drawer system InnoTech www.hettich.com

Double walled steel/stainless steel drawer system InnoTech for variable pot-and-pan drawer widths Height 144 mm Quadro V6 Silent System/ Quadro V6 Full-extension Load capacity 30 kg Quadro V6+ Silent System Full-extension Load capacity 50 kg Quadro V8 Silent System Full-extension Load capacity 70 kg Quadro 30 Part-extension Load capacity 30 kg Hole positions for Quadro/ minimum installation height For further details see page 5.2.66-5.2.70 177 ø4 ø6,3 12 9,5 144 183 ø4 ø6,3 12 9,5 144 188 ø4 ø6,3 12 9,5 144 174 ø4 ø6,3 9,5 144 36 42 47 12 33 ø3,5x12 ø3,5x12 ø3,5x12 ø3,5x12 Hole positions for front connectors A 3x ø10x12,5 A 3x ø10x12,5 A 3x ø10x12,5 A 3x ø10x12,5 96 96 96 96 4,5 40,5 32 14 46,5 4,5 32 14 51,5 4,5 32 14 4,5 37,5 32 14 KD EB KD EB From a cabinet width of 800 mm, we recommend use of the Quadro V6+ or Quadro V8 KD EB KD EB By varying the Quadro installation width (EB), 3 different cabinet side panel thicknesses (KD) can be accommodated without changing the drawer dimensions. The following dimensions apply (mm): 23 18 21 19 20 Cabinet thickness (KD) 18 19 Quadro installation width (EB) 12,5 10,5 9,5 Dimension A 23 21 20 12,5 10,5 9,5 Dimensions LT NL C Wooden rear panel Aluminium rear panel B LB LB = inside cabinet width NL = nominal length LT = min. interior cabinet depth, depending on the Quadro used Size Wooden rear panel Aluminium rear panel A Bottom panel depth NL + 10 NL - 3 B Bottom panel width LB - 2 x EB - 51,5 LB - 2 x EB - 51,5 C Rear panel width LB - 2 x EB - 63 LB - 2 x EB - 63 D Rear panel height 144 Processing technology see group 2 A D 3x ø3,5x12 9 44 144 10 ø3,5x20 2x Dimensions Order no. PU mm ø 3,5 x 12 0 045 7 200 ø 3,5 x 20 0 045 8 200 Double walled drawer system InnoTech 5.2.27

Double walled steel/stainless steel drawer system InnoTech for variable pot-and-pan drawer widths Height 176 mm Quick insertion and removal of the pot-and-pan drawer No bottom panel machining Toolless assembly/disassembly and convenient front panel adjustment Perfect drawer action with Quadro partial or full extension; optionally with Silent System for closing quietly and gently adapted to the thickness of the cabinet sides with, 18 and 19 mm The following components are all you need for assembling an InnoTech pot-and-pan drawer: Pot-and-pan drawer set, height 176 mm + Front connectors with expanding dowel or to screw-on + Quadro drawer slides see page 5.2.65 + Bottom and rear panel, mm Pot-and-pan drawer set, height 176 mm contains: 1 set drawer profiles, steel/stainless steel 1 set back panel connectors, steel 2 lengthwise railings, steel/stainless steel including front connectors 2 pcs cover caps with Hettich logo Pan-head screws ø 3,5 x 12 mm Nominal Order no. PU length mm powder-coated steel stainless steel silver anthracite brushed 260 9 079 089 9 079 092 9 079 604 1 set 300 9 079 090 9 079 094 1 set 350 0 044 223 9 079 104 9 079 608 1 set 420 0 044 224 9 079 105 9 079 609 1 set 470 0 044 225 9 079 107 9 079 611 1 set 520 0 044 226 9 079 109 9 079 612 1 set 620 0 044 323 9 079 110 9 079 613 1 set Cover caps with customised imprint available on request Front connectors White plastic Assembly Order no. PU A With expanding dowel 0 077 911 1/40 B Screw-on 0 077 910 1/40 A B Fixing with countersunk chipboard screw ø 3,5 mm Technical information see page 5.2.1 5.2.28 Double walled drawer system InnoTech www.hettich.com

Double walled steel/stainless steel drawer system InnoTech for variable pot-and-pan drawer widths Height 176 mm Quadro V6 Silent System/ Quadro V6 Full-extension Load capacity 30 kg Quadro V6+ Silent System Full-extension Load capacity 50 kg Quadro V8 Silent System Full-extension Load capacity 70 kg Quadro 30 Part-extension Load capacity 30 kg Hole positions for Quadro/ minimum installation height For further details see page 5.2.66-5.2.70 209 ø4 ø6,3 12 9,5 176 215 ø4 ø6,3 12 9,5 176 ø4 ø6,3 220 12 9,5 176 206 ø4 ø6,3 9,5 176 36 42 47 12 33 ø3,5x12 ø3,5x12 ø3,5x12 ø3,5x12 Hole positions for front connectors A 3x ø10x12,5 A 3x ø10x12,5 A 3x ø10x12,5 A 3x ø10x12,5 128 128 128 128 4,5 40,5 32 14 46,5 4,5 32 14 51,5 4,5 32 14 4,5 37,5 32 14 KD EB KD EB From a cabinet width of 800 mm, we recommend use of the Quadro V6+ or Quadro V8 KD EB KD EB By varying the Quadro installation width (EB), 3 different cabinet side panel thicknesses (KD) can be accommodated without changing the drawer dimensions. The following dimensions apply (mm): 23 18 21 19 20 Cabinet thickness (KD) 18 19 Quadro installation width (EB) 12,5 10,5 9,5 Dimension A 23 21 20 12,5 10,5 9,5 Dimensions LT NL C Wooden rear panel LB = inside cabinet width NL = nominal length LT = min. interior cabinet depth, depending on the Quadro used Size Wooden rear panel A Bottom panel depth NL + 10 B Bottom panel width LB - 2 x EB - 51,5 C Rear panel width LB - 2 x EB - 63 D Rear panel height 176 B LB Processing technology see group 2 A D 3x ø3,5x12 9 176 44 10 Dimensions Order no. PU mm ø 3,5 x 12 0 045 7 200 ø 3,5 x 20 0 045 8 200 Double walled drawer system InnoTech 5.2.29

Double walled steel drawer system InnoTech internal drawer Basic for variable cabinet widths, height 70 mm Quick insertion and removal of the internal drawer No bottom panel machining Toolless assembly/disassembly and convenient front panel adjustment Perfect drawer action with Quadro partial or full extension; optionally with Silent System for closing quietly and gently adapted to the thickness of the cabinet sides with, 18 and 19 mm The following components are all you need for assembling an InnoTech internal drawer: Drawer set, height 70 mm + Rear panel of aluminium or wood, mm + Aluminium drawer front Basic for standard cabinet widths or Corner clip for drawer front Basic and Aluminium drawer front Basic for cutting to length + Quadro drawer slides see page 5.2.65 + Bottom panel, mm Drawer set, height 70 mm contains: 1 set drawer profiles, powder-coated steel, silver 1 set back panel connectors, powder-coated steel, silver 2 pcs cover caps with Hettich logo Pan-head screws ø 3,5 x 12 mm Nominal length mm Order no. PU 350 0 077 906 1 set 420 0 077 907 1 set 470 0 077 908 1 set 520 0 077 909 1 set 620 0 079 557 1 set Cover caps with customised imprint available on request Aluminium back panel Custom length Length 2000 mm Pan-head screws ø 3,5 x 20 mm Powder-coated silver Order no. PU 0 077 913 1 Aluminium front panel Basic With premounted corner connectors For standard cabinet widths Anodised silver Technical information see page 5.2.1 Cabinet width Order no. mm PU 1 PU 20 300 0 041 720 9 025 977 400 0 041 722 9 025 981 450 9 079 112 9 025 982 500 0 041 730 9 025 983 600 0 041 740 9 025 984 800 0 041 750 9 047 869 900 0 041 752 9 025 985 1000 0 041 753 9 025 987 1200 9 079 114 9 025 988 Corner connector for drawer front Basic Grey plastic Order no. PU 0 044 926 1/10 sets Aluminium front panel Basic Custom length Length 2000 mm Anodised silver Order no. PU 0 044 925 1 5.2.30 Double walled drawer system InnoTech www.hettich.com

Double walled steel drawer system InnoTech internal drawer Basic for variable cabinet widths, height 70 mm Quadro V6 Silent System/ Quadro V6 Full-extension Load capacity 30 kg Quadro V6+ Silent System Full-extension Load capacity 50 kg Quadro V8 Silent System Full-extension Load capacity 70 kg Quadro 30 Part-extension Load capacity 30 kg Hole positions for Quadro/ minimum installation height For further details see page 5.2.66-5.2.70 min. 2 ø4x40 Interior panel min. 2 ø4x40 Interior panel min. 2 min. 2 ø4x40 Interior panel ø4x40 Interior panel 102 36 ø4 ø6,3 12 9,5 70 108 42 ø4 ø6,3 12 9,5 70 47 12 ø4 ø6,3 113 12 9,5 70 100 ø4 ø6,3 9,5 34,5 min. 2 70 ø3,5x12 ø3,5x12 ø3,5x12 ø3,5x12 From a cabinet width of 800 mm, we recommend use of the Quadro V6+ or Quadro V8 By varying the Quadro installation width (EB), 3 different cabinet side panel thicknesses (KD) can be accommodated without changing the drawer dimensions. The following dimensions apply (mm): 18 19 Cabinet thickness (KD) 18 19 Quadro installation width (EB) 12,5 10,5 9,5 12,5 10,5 9,5 Usable interior depth Nominal length - 24 Distance rail For bridging the door/hinge protrusion White plastic 485 25 50 Order no. PU 0 013 952 1 Dimensions LT NL C Wooden rear panel Aluminium rear panel D ø3,5x20 E B LB A 9 65,5 38 10 LB = inside cabinet width NL = nominal length LT = min. interior cabinet depth, depending on the Quadro used Size Wooden rear panel Aluminium rear panel A Bottom panel depth NL + 10 NL - 3 B Bottom panel width LB - 2 x EB - 51,5 LB - 2 x EB - 51,5 C Rear panel width LB - 2 x EB - 63 LB - 2 x EB - 63 D Rear panel height 65,5 E Aluminium front panel LB - 2 x EB - 71,5 LB - 2 x EB - 71,5 2x ø3,5x12 Dimensions Order no. PU mm ø 3,5 x 12 0 045 7 200 ø 3,5 x 20 0 045 8 200 Processing technology see group 2 Double walled drawer system InnoTech 5.2.31

Double walled steel/stainless steel drawer system InnoTech internal drawer Exclusiv for variable cabinet widths, height 70 mm Quick insertion and removal of the internal drawer No bottom panel machining Toolless assembly/disassembly and convenient front panel adjustment Perfect drawer action with Quadro partial or full extension; optionally with Silent System for closing quietly and gently adapted to the thickness of the cabinet sides with, 18 and 19 mm The following components are all you need for assembling an InnoTech internal drawer: Drawer set, height 70 mm + Rear panel of aluminium or wood, mm + Glass drawer front Exclusiv for standard cabinet widths or front panels individually produced by the installer (drawing see page 5.2.33) + Corner connectors for glass drawer front Exclusiv + Quadro drawer slides see page 5.2.65 + Bottom panel, mm Drawer set, height 70 mm contains: 1 set drawer profiles, steel/stainless steel 1 set back panel connectors, steel 2 pcs cover caps with Hettich logo Pan-head screws ø 3,5 x 12 mm Nominal Order no. PU length mm powder-coated steel stainless steel silver anthracite brushed 260 0 077 905 9 078 994 0 040 450 1 set 300 9 078 993 9 078 995 1 set 350 0 077 906 9 078 996 0 040 451 1 set 420 0 077 907 9 078 997 0 040 452 1 set 470 0 077 908 9 078 998 0 040 453 1 set 520 0 077 909 9 079 021 0 040 454 1 set 620 0 079 557 9 079 023 0 040 455 1 set Cover caps with customised imprint available on request Glass drawer front Exclusiv For standard cabinet widths Satin Cabinet width Order no. PU mm 300 9 079 143 1 400 9 079 145 1 450 9 079 147 1 500 9 079 148 1 550 9 079 309 1 600 9 079 310 1 800 9 079 311 1 900 9 079 312 1 1000 9 079 313 1 1200 9 079 314 1 Corner connectors for glass drawer front Exclusiv Corner connector, lacquered zinc die-cast Profiled retainer, length 1042 mm, aluminium lacquered/anodized Front connectors and screws Finish Order no. PU aluminium finish 9 079 115 1 stainless steel finish 9 079 125 1 Aluminium rear panel Custom length Length 2000 mm Pan-head screws ø 3,5 x 20 mm Powder-coated Finish Order no. PU silver 0 077 913 1 anthracite 9 079 026 1 Technical information see page 5.2.1 5.2.32 Double walled drawer system InnoTech www.hettich.com

Double walled steel/stainless steel drawer system InnoTech internal drawer Exclusiv for variable cabinet widths, height 70 mm Quadro V6 Silent System/ Quadro V6 Full-extension Load capacity 30 kg Quadro V6+ Silent System Full-extension Load capacity 50 kg Quadro V8 Silent System Full-extension Load capacity 70 kg Quadro 30 Part-extension Load capacity 30 kg Hole positions for Quadro/ minimum installation height For further details see page 5.2.66-5.2.70 min. 2 Interior panel min. 2 Interior panel min. 2 Interior panel min. 2 ø4 ø6,3 107 12 9,5 36 70 ø4 ø6,3 113 12 9,5 42 70 118 ø4 ø6,3 12 9,5 47 12 70 105 ø4 ø6,3 34,5 min. 2 9,5 Interior panel 70 ø3,5x12 ø3,5x12 ø3,5x12 ø3,5x12 From a cabinet width of 800 mm, we recommend use of the Quadro V6+ or Quadro V8 By varying the Quadro installation width (EB), 3 different cabinet side panel thicknesses (KD) can be accommodated without changing the drawer dimensions. The following dimensions apply (mm): Cabinet thickness (KD) 18 19 18 19 Quadro installation width (EB) 12,5 10,5 9,5 12,5 10,5 9,5 Drawer front for internal drawer Exclusiv Material thickness 4 mm R2 57 ø10 Distance rail For bridging the door/hinge protrusion White plastic 485 25 50 102 32 37,5 14,5 LB - 2 x EB - 21 14,5 Order no. PU 0 013 952 1 Dimensions Wooden rear panel Aluminium rear panel LT NL C 105 56 F B LB A D 9 65,5 38 10 ø3,5x20 LB = inside cabinet width NL = nominal length LT = min. interior cabinet depth, depending on the Quadro used Size Wooden rear panel Aluminium rear panel A Bottom panel depth NL + 10 NL - 3 B Bottom panel width LB - 2 x EB - 51,5 LB - 2 x EB - 51,5 C Rear panel width LB - 2 x EB - 63 LB - 2 x EB - 63 D Rear panel height 65,5 F Profiled retainer LB - 2 x EB - 101 LB - 2 x EB - 101 2x ø3,5x12 Dimensions Order no. PU mm ø 3,5 x 12 0 045 7 200 ø 3,5 x 20 0 045 8 200 Processing technology see group 2 Double walled drawer system InnoTech 5.2.33

Double walled steel drawer system InnoTech internal pot-and-pan drawer Basic for variable cabinet widths, height 144 mm Quick insertion and removal of the internal pot-and-pan drawer No bottom panel machining Toolless assembly/disassembly and convenient front panel adjustment Perfect drawer action with Quadro partial or full extension; optionally with Silent System for closing quietly and gently adapted to the thickness of the cabinet sides with, 18 and 19 mm The following components are all you need for assembling an InnoTech internal pot-and-pan drawer: Internal pot-and-pan drawer set, height 144 mm + Rear panel of aluminium or wood, mm + Aluminium drawer front Basic for standard cabinet widths or Aluminium drawer front Basic for cutting to length and Corner connector for drawer front Basic and Crosswise railing, custom length + Quadro drawer slides see page 5.2.65 + Bottom panel, mm Internal pot-and-pan drawer set, height 144 mm contains: 1 set drawer profiles, powder-coated steel, silver 1 set back panel connectors, powder-coated steel, silver 2 lengthwise railings, powder-coated steel, silver 2 pcs cover caps with Hettich logo Pan-head screws ø 3,5 x 12 mm Nominal length mm Order no. PU 350 9 082 451 1 set 420 9 082 450 1 set 470 9 082 448 1 set 520 9 082 446 1 set 620 9 079 325 1 set Cover caps with customised imprint available on request Aluminium front panel Basic With premounted corner connectors For standard cabinet widths Anodised silver Aluminium rear panel Custom length Length 2000 mm Pan-head screws ø 3,5 x 20 mm Powder-coated Aluminium front panel Basic Custom length Length 2000 mm Anodised silver Cabinet width Order no. mm PU 1 PU 20 300 0 041 756 9 025 989 400 0 041 760 9 025 990 450 9 079 327 9 025 993 500 0 041 770 9 025 995 600 0 041 780 9 025 997 800 0 041 782 9 047 870 900 0 041 790 9 025 998 1000 0 041 793 9 025 999 1200 9 079 328 9 026 001 Technical information see page 5.2.1 Order no. PU 0 013 225 1 Corner connector for drawer front Basic Grey plastic Order no. PU 0 046 733 1/10 sets Order no. PU 0 044 925 1 Crosswise railing Custom length Length 1140 mm Powder-coated steel, silver Order no. PU 0 077 924 1/5 5.2.34 Double walled drawer system InnoTech www.hettich.com

Double walled steel drawer system InnoTech internal pot-and-pan drawer Basic for variable cabinet widths, height 144 mm Quadro V6 Silent System/ Quadro V6 Full-extension Load capacity 30 kg Quadro V6+ Silent System Full-extension Load capacity 50 kg Quadro V8 Silent System Full-extension Load capacity 70 kg Quadro 30 Part-extension Load capacity 30 kg Hole positions for Quadro/ minimum installation height For further details see page 5.2.66-5.2.70 ø4x40 ø4ø6,3 178 12 9,5 36 Crosswise railing Interior panel 144 ø4x40 ø4ø6,3 184 12 9,5 42 Crosswise railing Interior panel 144 ø4x40 ø4ø6,3 189 12 9,5 47 12 Crosswise railing Interior panel 144 ø4x40 ø4ø6,3 176 9,5 34,5 Crosswise railing Interior panel 144 ø3,5x12 ø3,5x12 ø3,5x12 ø3,5x12 From a cabinet width of 800 mm, we recommend use of the Quadro V6+ or Quadro V8 By varying the Quadro installation width (EB), 3 different cabinet side panel thicknesses (KD) can be accommodated without changing the drawer dimensions. The following dimensions apply (mm): Cabinet thickness (KD) 18 19 18 19 Quadro installation width (EB) 12,5 10,5 9,5 12,5 10,5 9,5 Usable interior depth Distance rail 485 25 For bridging the door/hinge 50 Nominal length - 24 protrusion White plastic Order no. PU 0 013 952 1 Dimensions LT NL C Wooden rear panel Aluminium rear panel G D LB = inside cabinet width NL = nominal length E LB LT = min. interior cabinet depth, depending on the Quadro used Size Wooden rear panel Aluminium rear panel A Bottom panel depth NL + 10 NL - 3 B Bottom panel width LB - 2 x EB - 51,5 LB - 2 x EB - 51,5 C Rear panel width LB - 2 x EB - 63 LB - 2 x EB - 63 D Rear panel height 144 E Aluminium front panel LB - 2 x EB - 71,5 LB - 2 x EB - 71,5 G Crosswise railing LB - 2 x EB - 2 LB - 2 x EB - 2 Processing technology see group 2 B A 3x ø3,5x12 9 44 144 10 ø3,5x20 2x Dimensions Order no. PU mm ø 3,5 x 12 0 045 7 200 ø 3,5 x 20 0 045 8 200 Double walled drawer system InnoTech 5.2.35

Double walled steel/stainless steel drawer system InnoTech internal pot-and-pan drawer Exclusiv for variable cabinet widths, height 144 mm Quick insertion and removal of the internal pot-and-pan drawer No bottom panel machining Toolless assembly/disassembly and convenient front panel adjustment Perfect drawer action with Quadro partial or full extension; optionally with Silent System for closing quietly and gently adapted to the thickness of the cabinet sides with, 18 and 19 mm Pot-and-pan drawer set, height 144 mm contains: 1 set drawer profiles, steel/stainless steel 1 set back panel connectors, steel 2 lengthwise railings, steel/stainless steel including front connectors 2 pcs cover caps with Hettich logo Pan-head screws ø 3,5 x 12 mm The following components are all you need for assembling an InnoTech internal pot-and-pan drawer: Pot-and-pan drawer set, height 144 mm + Rear panel of aluminium or wood, mm + Glass drawer front Exclusiv for standard cabinet widths or front panels individually produced by the installer (drawing see page 5.2.37) + Corner connectors for glass drawer front Exclusiv + Quadro drawer slides see page 5.2.65 + Bottom panel, mm Nominal Order no. PU length mm powder-coated steel stainless steel silver anthracite brushed 260 9 079 039 9 079 045 9 079 591 1 set 300 9 079 042 9 079 047 1 set 350 0 013 218 9 079 050 0 040 456 1 set 420 0 013 219 9 079 051 0 040 457 1 set 470 0 013 220 9 079 053 0 040 458 1 set 520 0 013 221 9 079 060 0 040 459 1 set 620 0 013 222 9 079 063 0 040 460 1 set Cover caps with customised imprint available on request Glass drawer front Exclusiv For standard cabinet widths Satin Cabinet width Order no. PU mm 300 9 079 362 1 400 9 079 366 1 450 9 079 372 1 500 9 079 374 1 550 9 079 376 1 600 9 079 378 1 800 9 079 385 1 900 9 079 387 1 1000 9 079 388 1 1200 9 079 389 1 Corner connectors for glass drawer front Exclusiv Corner connector, lacquered zinc die-cast Profiled retainer, length 1042 mm, aluminium lacquered/anodized Front connectors and screws Finish Order no. PU aluminium finish 9 079 329 1 stainless steel finish 9 079 330 1 Aluminium back panel Custom length Length 2000 mm Pan-head screws ø 3,5 x 20 mm Powder-coated Finish Order no. PU silver 0 013 225 1 anthracite 9 079 084 1 Technical information see page 5.2.1 5.2.36 Double walled drawer system InnoTech www.hettich.com

Double walled steel/stainless steel drawer system InnoTech internal pot-and-pan drawer Exclusiv for variable cabinet widths, height 144 mm Quadro V6 Silent System/ Quadro V6 Full-extension Load capacity 30 kg Quadro V6+ Silent System Full-extension Load capacity 50 kg Quadro V8 Silent System Full-extension Load capacity 70 kg Quadro 30 Part-extension Load capacity 30 kg Hole positions for Quadro/ minimum installation height min. 2 ø4 ø6,3 Interior panel min. 2 ø4 ø6,3 Interior panel min. 2 ø4 ø6,3 Interior panel min. 2 ø4 ø6,3 Interior panel For further details see page 5.2.66-5.2.70 181 12 9,5 36 144 187 12 9,5 42 144 192 12 9,5 47 12 144 179 9,5 34,5 min. 2 144 ø3,5x12 ø3,5x12 ø3,5x12 ø3,5x12 From a cabinet width of 800 mm, we recommend use of the Quadro V6+ or Quadro V8 By varying the Quadro installation width (EB), 3 different cabinet side panel thicknesses (KD) can be accommodated without changing the drawer dimensions. The following dimensions apply (mm): Cabinet thickness (KD) 18 19 18 19 Quadro installation width (EB) 12,5 10,5 9,5 12,5 10,5 9,5 Drawer front for internal pot-and-pan drawer Exclusiv Material thickness 4 mm 57 31 135 176 ø10 145 Distance rail For bridging the door/hinge protrusion White plastic 485 25 50 32 37,5 14,5 LB - 2 x EB - 21 14,5 Order no. PU 0 013 952 1 Dimensions LT NL C Wooden rear panel Aluminium rear panel 179 56 F B LB A D 3x ø3,5x12 9 44 144 ø3,5x20 2x! LB = inside cabinet width NL = nominal length LT = min. interior cabinet depth, depending on the Quadro used Size Wooden rear panel Aluminium rear panel A Bottom panel depth NL + 10 NL - 3 B Bottom panel width LB - 2 x EB - 51,5 LB - 2 x EB - 51,5 C Rear panel width LB - 2 x EB - 63 LB - 2 x EB - 63 D Rear panel height 144 F Profiled retainer LB - 2 x EB - 101 LB - 2 x EB - 101 Processing technology see group 2 10 Dimensions Order no. PU mm ø 3,5 x 12 0 045 7 200 ø 3,5 x 20 0 045 8 200 Double walled drawer system InnoTech 5.2.37

Double walled steel drawer system InnoTech preassembled drawers for standard cabinet widths 5.2.38 Double walled drawer system InnoTech www.hettich.com

Double walled steel drawer system InnoTech preassembled drawers for standard cabinet widths As an alternative to variable-width profile systems, we offer preassembled, 3-sided drawers Nominal lengths 420, 470, 520 mm For cabinet width 275-1200 mm As drawer/internal drawer or As pot-and-pan drawer/internal pot-and-pan drawer With drawer profiles and rear panel, powder-coated steel, silver mm bottom panel, silver-grey InnoTech preassembled drawer InnoTech preassembled pot-and-pan drawer InnoTech internal drawer Basic InnoTech internal pot-and-pan drawer Basic InnoTech internal drawer Exclusiv InnoTech internal pot-and-pan drawer Exclusiv...this is the easy way to a finished drawer! Double walled drawer system InnoTech 5.2.39

Double walled steel drawer system InnoTech preassembled drawer for standard cabinet widths, height 70 mm Quick insertion and removal of the drawer Toolless assembly/disassembly and convenient front panel adjustment Perfect drawer action with Quadro partial or full extension; optionally with Silent System for closing quietly and gently adapted to the thickness of the cabinet sides with, 18 and 19 mm The following components are all you need for assembling an InnoTech wooden drawer: Preassembled drawer, height 70 mm + Front connectors with expanding dowel or to screw-on + Quadro drawer slides see page 5.2.65 Preassembled drawer, height 70 mm contains: 1 pcs drawer, powder-coated steel, silver, 3-sided, preassembled, complete with silver-grey drawer bottom 2 pcs cover caps with Hettich logo Cabinet Nominal length mm PU width mm 420 470 520 275 0 078 400 0 078 408 0 078 4 1 300 0 078 401 0 078 409 0 078 417 1 350 0 078 402 0 078 410 0 078 418 1 400 0 078 403 0 078 411 0 078 419 1 450 0 078 404 0 078 412 0 078 420 1 500 0 078 405 0 078 413 0 078 421 1 550 0 078 406 0 078 414 0 078 422 1 600 0 078 407 0 078 415 0 078 423 1 800 0 013 248 0 013 252 1 900 0 013 249 0 013 253 1 1000 0 013 250 0 013 254 1 1200 0 013 251 0 013 255 1 Cover caps with customised imprint available on request Front connectors White plastic Assembly Order no. PU A With expanding dowel 0 077 911 1/40 B Screw-on 0 077 910 1/40 A B Fixing with countersunk chipboard screw ø 3,5 mm Technical information see page 5.2.1 5.2.40 Double walled drawer system InnoTech www.hettich.com

Double walled steel drawer system InnoTech preassembled drawer for standard cabinet widths, height 70 mm Quadro V6 Silent System/ Quadro V6 Full-extension Load capacity 30 kg Quadro V6+ Silent System Full-extension Load capacity 50 kg Quadro V8 Silent System Full-extension Load capacity 70 kg Quadro 30 Part-extension Load capacity 30 kg Hole positions for Quadro/ minimum installation height For further details see page 5.2.66-5.2.70 ø4 ø6,3 97 12 9,5 36 70 ø4 ø6,3 103 12 9,5 42 70 ø4 ø6,3 108 12 9,5 47 12 70 ø4 ø6,3 94 9,5 33 70 ø3,5x12 ø3,5x12 ø3,5x12 ø3,5x12 Hole positions for front connectors A 2x ø10x12,5 A 2x ø10x12,5 A 2x ø10x12,5 A 2x ø10x12,5 40,5 4,5 32 14 32 4,5 14 46,5 51,5 4,5 32 14 32 4,5 14 37,5 KD EB KD EB KD EB KD EB From a cabinet width of 800 mm, we recommend use of the Quadro V6+ or Quadro V8 By varying the Quadro installation width (EB), 3 different cabinet side panel thicknesses (KD) can be accommodated without changing the drawer dimensions. The following dimensions apply (mm): 23 18 21 19 20 Cabinet thickness (KD) 18 19 Quadro installation width (EB) 12,5 10,5 9,5 Dimension A 23 21 20 12,5 10,5 9,5 Processing technology see group 2 Double walled drawer system InnoTech 5.2.41

Double walled steel drawer system InnoTech preassembled pot-and-pan drawer for standard cabinet widths, height 144 mm Quick insertion and removal of the pot-and-pan drawer Toolless assembly/disassembly and convenient front panel adjustment Perfect drawer action with Quadro partial or full extension; optionally with Silent System for closing quietly and gently adapted to the thickness of the cabinet sides with, 18 and 19 mm The following components are all you need for assembling an InnoTech pot-and-pan drawer: 21 Preassembled pot-and-pan drawer, height 144 mm + Front connectors with expanding dowel or to screw-on + Quadro drawer slides see pages 5.2.65 21 Preassembled pot-and-pan drawer, height 144 mm contains: 1 pcs pot-and-pan drawer, powder-coated steel, silver, 3-sided, preassembled, complete with silver-grey drawer bottom 2 lengthwise railings including front connectors, powder-coated steel, silver 2 pcs cover caps with Hettich logo Cabinet width Nominal length mm PU mm 420 470 520 275 0 013 256 0 013 264 0 013 276 1 300 0 013 257 0 013 265 0 013 277 1 350 0 013 258 0 013 266 0 013 278 1 400 0 013 259 0 013 267 0 013 279 1 450 0 013 260 0 013 268 0 013 280 1 500 0 013 261 0 013 269 0 013 281 1 550 0 013 262 0 013 270 0 013 282 1 600 0 013 263 0 013 271 0 013 283 1 800 0 013 272 0 013 284 1 900 0 013 273 0 013 285 1 1000 0 013 274 0 013 286 1 1200 0 013 275 0 013 287 1 21 Cover caps with customised imprint available on request Front connectors White plastic Assembly Order no. PU A B A B With expanding dowel 0 077 911 1/40 Screw-on 0 077 910 1/40 Fixing with countersunk chipboard screw ø 3,5 mm Technical information see page 5.2.1 5.2.42 Double walled drawer system InnoTech www.hettich.com

Double walled steel drawer system InnoTech preassembled pot-and-pan drawer for standard cabinet widths, height 144 mm Quadro V6 Silent System/ Quadro V6 Full-extension Load capacity 30 kg Quadro V6+ Silent System Full-extension Load capacity 50 kg Quadro V8 Silent System Full-extension Load capacity 70 kg Quadro 30 Part-extension Load capacity 30 kg Hole positions for Quadro/ minimum installation height For further details see page 5.2.66-5.2.70 177 ø4 ø6,3 12 9,5 144 183 ø4 ø6,3 12 9,5 144 188 ø4 ø6,3 12 9,5 144 174 ø4 ø6,3 9,5 144 36 42 47 12 33 ø3,5x12 ø3,5x12 ø3,5x12 ø3,5x12 Hole positions for front connectors A 3x ø10x12,5 A 3x ø10x12,5 A 3x ø10x12,5 A 3x ø10x12,5 96 96 96 96 4,5 40,5 32 14 46,5 4,5 32 14 51,5 4,5 32 14 4,5 37,5 32 14 KD EB KD EB From a cabinet width of 800 mm, we recommend use of the Quadro V6+ or Quadro V8 KD EB KD EB By varying the Quadro installation width (EB), 3 different cabinet side panel thicknesses (KD) can be accommodated without changing the drawer dimensions. The following dimensions apply (mm): 23 18 21 19 20 Cabinet thickness (KD) 18 19 Quadro installation width (EB) 12,5 10,5 9,5 Dimension A 23 21 20 12,5 10,5 9,5 Processing technology see group 2 Double walled drawer system InnoTech 5.2.43

Double walled steel drawer system InnoTech preassembled internal drawer Basic for standard cabinet widths, height 70 mm Quick insertion and removal of the internal drawer Toolless assembly/disassembly and convenient front panel adjustment Perfect drawer action with Quadro partial or full extension; optionally with Silent System for closing quietly and gently adapted to the thickness of the cabinet sides with, 18 and 19 mm The following components are all you need for assembling an InnoTech internal drawer: Preassembled drawer, height 70 mm + Aluminium drawer front Basic for standard cabinet widths + Quadro drawer slides see page 5.2.65 Preassembled drawer, height 70 mm contains: 1 pcs drawer, powder-coated steel, silver, 3-sided, preassembled, complete with silver-grey drawer bottom 2 pcs cover caps with Hettich logo Cabinet width Nominal length mm PU mm 420 470 520 300 0 078 401 0 078 409 0 078 417 1 400 0 078 403 0 078 411 0 078 419 1 450 0 078 404 0 078 412 0 078 420 1 500 0 078 405 0 078 413 0 078 421 1 600 0 078 407 0 078 415 0 078 423 1 800 0 013 248 0 013 252 1 900 0 013 249 0 013 253 1 1000 0 013 250 0 013 254 1 1200 0 013 251 0 013 255 1 Cover caps with customised imprint available on request Aluminium front panel Basic With premounted corner connectors, grey plastic For standard cabinet widths Anodised silver Cabinet width Order no. mm PU 1 PU 20 300 0 041 720 9 025 977 400 0 041 722 9 025 981 450 9 079 112 9 025 982 500 0 041 730 9 025 983 600 0 041 740 9 025 984 800 0 041 750 9 047 869 900 0 041 752 9 025 985 1000 0 041 753 9 025 987 1200 9 079 114 9 025 988 Technical information see page 5.2.1 5.2.44 Double walled drawer system InnoTech www.hettich.com

Double walled steel drawer system InnoTech preassembled internal drawer Basic for standard cabinet widths, height 70 mm Quadro V6 Silent System/ Quadro V6 Full-extension Load capacity 30 kg Quadro V6+ Silent System Full-extension Load capacity 50 kg Quadro V8 Silent System Full-extension Load capacity 70 kg Quadro 30 Part-extension Load capacity 30 kg Hole positions for Quadro/ minimum installation height For further details see page 5.2.66-5.2.70 min. 2 ø4x40 Interior panel min. 2 ø4x40 Interior panel min. 2 ø4x40 Interior panel min. 2 ø4x40 Interior panel 102 36 ø4 ø6,3 12 9,5 70 108 42 ø4 ø6,3 12 9,5 70 47 12 ø4 ø6,3 113 12 9,5 70 100 ø4 ø6,3 9,5 34,5 min. 2 70 ø3,5x12 ø3,5x12 ø3,5x12 ø3,5x12 From a cabinet width of 800 mm, we recommend use of the Quadro V6+ or Quadro V8 18 19 By varying the Quadro installation width (EB), 3 different cabinet side panel thicknesses (KD) can be accommodated without changing the drawer dimensions. The following dimensions apply (mm): Cabinet thickness (KD) 18 19 Quadro installation width (EB) 12,5 10,5 9,5 12,5 10,5 9,5 Usable interior depth Distance rail 485 25 For bridging the door/hinge Nominal length - 24 protrusion 50 White plastic Order no. PU 0 013 952 1 Processing technology see group 2 Double walled drawer system InnoTech 5.2.45

Double walled steel drawer system InnoTech preassembled internal drawer Exclusiv For standard cabinet widths, height 70 mm Quick insertion and removal of the internal drawer Toolless assembly/disassembly and convenient front panel adjustment Perfect drawer action with Quadro partial or full extension; optionally with Silent System for closing quietly and gently adapted to the thickness of the cabinet sides with, 18 and 19 mm Preassembled drawer, height 70 mm contains: 1 pcs drawer, powder-coated steel, silver, 3-sided, preassembled, complete with silver-grey drawer bottom 2 pcs cover caps with Hettich logo The following components are all you need for assembling an InnoTech internal drawer: Preassembled drawer, height 70 mm + Glass drawer front Exclusiv for standard cabinet widths or front panels individually produced by the installer (drawing see page 5.2.47) + Corner connectors for glass drawer front Exclusiv + Quadro drawer slides see page 5.2.65 Cabinet width Nominal length mm PU mm 420 470 520 300 0 078 401 0 078 409 0 078 417 1 400 0 078 403 0 078 411 0 078 419 1 450 0 078 404 0 078 412 0 078 420 1 500 0 078 405 0 078 413 0 078 421 1 550 0 078 406 0 078 414 0 078 422 1 600 0 078 407 0 078 415 0 078 423 1 800 0 013 248 0 013 252 1 900 0 013 249 0 013 253 1 1000 0 013 250 0 013 254 1 1200 0 013 251 0 013 255 1 Cover caps with customised imprint available on request Glass drawer front Exclusiv For standard cabinet widths Satin Cabinet width Order no. PU mm 300 9 079 143 1 400 9 079 145 1 450 9 079 147 1 500 9 079 148 1 550 9 079 309 1 600 9 079 310 1 800 9 079 311 1 900 9 079 312 1 1000 9 079 313 1 1200 9 079 314 1 Corner connectors for glass drawer front Exclusiv Corner connector, zinc die-cast with aluminium finish Profiled retainer, length 1042 mm, aluminium silver anodised Front connectors and screws Order no. PU 9 079 115 1 Technical information see page 5.2.1 5.2.46 Double walled drawer system InnoTech www.hettich.com

Double walled steel drawer system InnoTech preassembled internal drawer Exclusiv for standard cabinet widths, height 70 mm Quadro V6 Silent System/ Quadro V6 Full-extension Load capacity 30 kg Quadro V6+ Silent System Full-extension Load capacity 50 kg Quadro V8 Silent System Full-extension Load capacity 70 kg Quadro 30 Part-extension Load capacity 30 kg Hole positions for Quadro/ minimum installation height For further details see page 5.2.66-5.2.70 min. 2 ø4 ø6,3 107 12 9,5 36 Interior panel 70 min. 2 ø4 ø6,3 113 12 9,5 42 Interior panel 70 min. 2 118 ø4 ø6,3 12 9,5 47 12 Interior panel 70 min. 2 ø4 ø6,3 105 9,5 34,5 Interior panel 70 min. 2 ø3,5x12 ø3,5x12 ø3,5x12 ø3,5x12 From a cabinet width of 800 mm, we recommend use of the Quadro V6+ or Quadro V8 By varying the Quadro installation width (EB), 3 different cabinet side panel thicknesses (KD) can be accommodated without changing the drawer dimensions. The following dimensions apply (mm): Cabinet thickness (KD) 18 19 18 19 Quadro installation width (EB) 12,5 10,5 9,5 12,5 10,5 9,5 Drawer front for internal drawer Exclusiv Material thickness 4 mm R2 57 ø10 Distance rail For bridging the door/hinge protrusion White plastic 485 25 50 102 32 37,5 14,5 LB - 2 x EB - 21 14,5 Order no. PU 0 013 952 1 Processing technology see group 2 Double walled drawer system InnoTech 5.2.47

Double walled steel drawer system InnoTech preassembled internal pot-and-pan drawer Basic for standard cabinet widths, height 144 mm Quick insertion and removal of the internal pot-and-pan drawer Toolless assembly/disassembly and convenient front panel adjustment Perfect drawer action with Quadro partial or full extension; optionally with Silent System for closing quietly and gently adapted to the thickness of the cabinet sides with, 18 and 19 mm The following components are all you need for assembling an InnoTech internal pot-and-pan drawer: 21 Preassembled pot-and-pan drawer, height 144 mm + Aluminium drawer front Basic for standard cabinet widths + 22 Lengthwise railings for preassembled internal drawer + Quadro drawer slides see page 5.2.65 21 Preassembled pot-and-pan drawer, height 144 mm contains: 1 pcs pot-and-pan drawer, powder-coated steel, silver, 3-sided, preassembled, complete with silver-grey drawer bottom 2 pcs cover caps with Hettich logo Cabinet Nominal length mm PU width mm 420 470 520 300 0 013 257 0 013 265 0 013 277 1 400 0 013 259 0 013 267 0 013 279 1 450 0 013 260 0 013 268 0 013 280 1 500 0 013 261 0 013 269 0 013 281 1 600 0 013 263 0 013 271 0 013 283 1 800 0 013 272 0 013 284 1 900 0 013 273 0 013 285 1 1000 0 013 274 0 013 286 1 1200 0 013 275 0 013 287 1 21 22 Cover caps with customised imprint available on request Aluminium front panel Basic With premounted corner connectors, grey plastic For standard cabinet widths Anodised silver Cabinet width Order no. mm PU 1 PU 20 300 0 041 756 9 025 989 400 0 041 760 9 025 990 450 9 079 327 9 025 993 500 0 041 770 9 025 995 600 0 041 780 9 025 997 800 0 041 782 9 047 870 900 0 041 790 9 025 998 1000 0 041 793 9 025 999 1200 9 079 328 9 026 001 Technical information see page 5.2.1 22 Lengthwise railings for preassembled internal pot-and-pan drawer Powder-coated steel, silver The longitudinal railing supplied with the preassembled front drawer must not be used Nominal length mm Order no. PU 420 9 079 4 2 470 0 047 311 2 520 0 047 290 2 5.2.48 Double walled drawer system InnoTech www.hettich.com

Double walled steel drawer system InnoTech preassembled internal pot-and-pan drawer Basic for standard cabinet widths, height 144 mm Quadro V6 Silent System/ Quadro V6 Full-extension Load capacity 30 kg Quadro V6+ Silent System Full-extension Load capacity 50 kg Quadro V8 Silent System Full-extension Load capacity 70 kg Quadro 30 Part-extension Load capacity 30 kg Hole positions for Quadro/ minimum installation height For further details see page 5.2.66-5.2.70 Crosswise Crosswise Crosswise min. 2 railing min. 2 railing min. 2 railing min. 2 ø4x40 ø4ø6,3 178 12 9,5 36 Interior panel ø4ø6,3 184 144 ø4x40 12 9,5 42 Interior panel 144 189 ø4x40 12 9,5 47 12 ø4ø6,3 Interior panel ø4ø6,3 144 176 ø4x40 9,5 34,5 min. 2 Crosswise railing Interior panel 144 ø3,5x12 ø3,5x12 ø3,5x12 ø3,5x12 From a cabinet width of 800 mm, we recommend use of the Quadro V6+ or Quadro V8 By varying the Quadro installation width (EB), 3 different cabinet side panel thicknesses (KD) can be accommodated without changing the drawer dimensions. The following dimensions apply (mm): Cabinet thickness (KD) 18 19 18 19 Quadro installation width (EB) 12,5 10,5 9,5 12,5 10,5 9,5 Usable interior depth Distance rail 485 25 For bridging the door/hinge 50 Nominal length - 24 protrusion White plastic Order no. PU 0 013 952 1 Processing technology see group 2 Double walled drawer system InnoTech 5.2.49

Double walled steel drawer system InnoTech preassembled internal pot-and-pan drawer Exclusiv for standard cabinet widths, height 144 mm Quick insertion and removal of the internal pot-and-pan drawer Toolless assembly/disassembly and convenient front panel adjustment Perfect drawer action with Quadro partial or full extension; optionally with Silent System for closing quietly and gently adapted to the thickness of the cabinet sides with, 18 and 19 mm 21 Preassembled pot-and-pan drawer, height 144 mm contains: 1 pcs pot-and-pan drawer, powder-coated steel, silver, 3-sided, preassembled, complete with silver-grey drawer bottom 2 pcs cover caps with Hettich logo The following components are all you need for assembling an InnoTech internal drawer: 21 Preassembled pot-and-pan drawer, height 144 mm + Glass drawer front Exclusiv for standard cabinet widths or front panels individually produced by the installer (drawing see page 5.2.51) + Corner clips for glass drawer front Exclusiv + Quadro drawer slides see page 5.2.65 Cabinet Nominal length mm PU width mm 420 470 520 300 0 013 257 0 013 265 0 013 277 1 400 0 013 259 0 013 267 0 013 279 1 450 0 013 260 0 013 268 0 013 280 1 21 500 0 013 261 0 013 269 0 013 281 1 550 0 013 262 0 013 270 0 013 282 1 600 0 013 263 0 013 271 0 013 283 1 800 0 013 272 0 013 284 1 900 0 013 273 0 013 285 1 1000 0 013 274 0 013 286 1 1200 0 013 275 0 013 287 1 Cover caps with customised imprint available on request Glass drawer front Exclusiv For standard cabinet widths Satin Cabinet width Order no. PU mm 300 9 079 362 1 400 9 079 366 1 450 9 079 372 1 500 9 079 374 1 550 9 079 376 1 600 9 079 378 1 800 9 079 385 1 900 9 079 387 1 1000 9 079 388 1 1200 9 079 389 1 Technical information see page 5.2.1 Corner connectors for drawer front Exclusiv Corner connector, zinc die-cast with aluminium finish Profiled retainer, length 1042 mm, aluminium silver anodised Front connectors and screws Order no. PU 9 079 329 1 5.2.50 Double walled drawer system InnoTech www.hettich.com

Double walled steel drawer system InnoTech preassembled internal pot-and-pan drawer Exclusiv for standard cabinet widths, height 144 mm Quadro V6 Silent System/ Quadro V6 Full-extension Load capacity 30 kg Quadro V6+ Silent System Full-extension Load capacity 50 kg Quadro V8 Silent System Full-extension Load capacity 70 kg Quadro 30 Part-extension Load capacity 30 kg Hole positions for Quadro/ minimum installation height min. 2 ø4 ø6,3 Interior panel min. 2 ø4 ø6,3 Interior panel min. 2 ø4 ø6,3 Interior panel min. 2 ø4 ø6,3 Interior panel For further details see page 5.2.66-5.2.70 181 12 9,5 36 144 187 12 9,5 42 144 192 12 9,5 47 12 144 179 9,5 34,5 min. 2 144 ø3,5x12 ø3,5x12 ø3,5x12 ø3,5x12 From a cabinet width of 800 mm, we recommend use of the Quadro V6+ or Quadro V8 By varying the Quadro installation width (EB), 3 different cabinet side panel thicknesses (KD) can be accommodated without changing the drawer dimensions. The following dimensions apply (mm): Cabinet thickness (KD) 18 19 18 19 Quadro installation width (EB) 12,5 10,5 9,5 12,5 10,5 9,5 Drawer front for internal pot-and-pan drawer Exclusiv Material thickness 4 mm 57 31 135 176 ø10 145 Distance rail For bridging the door/hinge protrusion White plastic 485 25 50 32 37,5 14,5 LB - 2 x EB - 21 14,5 Order no. PU 0 013 952 1 Processing technology see group 2 Double walled drawer system InnoTech 5.2.51

Double walled steel drawer system InnoTech bulk packaging System components An InnoTech drawer comprises the following components: InnoTech drawer profile, left and right Steel rear panel for drawers in standard cabinet widths (rear panel connectors are not required when using steel rear panels!) Rear panel connectors for drawers, left and right (when using wooden rear panels) Cover caps for drawer profile, 2 pcs Drawer front connectors, 2 pcs Drawer slides Quadro for InnoTech, see page 5.2.65 An InnoTech internal drawer Basic comprises the following components: InnoTech drawer profile, left and right Steel rear panel for drawers in standard cabinet widths (rear panel connectors are not required when using steel rear panels!) Rear panel connectors for drawers, left and right (when using wooden rear panels) Cover caps for drawer profile, 2 pcs Aluminium front panel Basic, height 70 mm Drawer slides Quadro for InnoTech, see page 5.2.65 5.2.52 Double walled drawer system InnoTech www.hettich.com

Double walled steel drawer system InnoTech bulk packaging System components An InnoTech pot-and-pan drawer comprises the following components: InnoTech drawer profile, left and right / Steel rear panel for pot-and-pan drawers in standard cabinet widths (rear panel connectors are not required when using steel rear panels!) Rear panel connectors for front panels, left and right (when using wooden rear panels) Cover caps for drawer profile, 2 pcs Drawer front connectors, 2 pcs Lengthwise railings for pot-and-pan drawer, 2 pcs Drawer slides Quadro for InnoTech, see page 5.2.65 / / An InnoTech internal pot-and-pan drawer Basic comprises the following components: InnoTech drawer profile, left and right Steel rear panel for pot-and-pan drawers in standard cabinet widths (rear panel connectors are not required when using steel rear panels!) Rear panel connectors for front panels, left and right (when using wooden rear panels) Cover caps for drawer profile, 2 pcs Aluminium front panel Basic, height 144 mm Lengthwise railings for internal drawer Basic Drawer slides Quadro for InnoTech, see page 5.2.65 Double walled drawer system InnoTech 5.2.53

Double walled steel drawer system InnoTech bulk packaging System components InnoTech drawer Powder-coated steel Rear panel for drawer, height 70 mm Powder-coated steel Nominal Finish Order no. PU length mm left right 260 silver 1 062 013 1 062 014 18 300 silver 9 019 688 9 019 689 18 350 silver 1 062 015 1 062 0 18 420 silver 1 062 017 1 062 018 18 470 silver 1 062 019 1 062 020 18 520 silver 1 062 521 1 062 522 18 620 silver 1 077 781 1 077 782 18 260 anthracite 9 070 215 9 070 2 18 300 anthracite 9 070 220 9 070 221 18 350 anthracite 9 070 222 9 070 223 18 420 anthracite 9 070 229 9 070 230 18 470 anthracite 9 068 042 9 068 043 18 520 anthracite 9 070 233 9 070 234 18 620 anthracite 9 070 247 9 070 248 18 Rear panel for pot-and-pan drawer, height 144 mm Powder-coated steel Cabinet width Finish PU mm silver anthracite 275 0 060 765 9 079 455 10 300 0 060 766 9 079 457 10 350 0 060 767 9 079 459 10 400 0 060 768 9 079 460 10 450 0 060 769 9 079 463 10 500 0 060 770 9 079 465 10 550 0 060 771 9 079 467 10 600 0 060 772 9 079 470 10 800 9 004 074 9 070 476 10 900 9 004 075 9 070 478 10 1000 9 004 076 9 070 479 10 1200 9 004 077 9 070 480 10 Rear panel connector for wooden/aluminium rear panels Powder-coated steel Type Finish left right PU Drawer silver 1 062 501 1 062 502 40 height 70 mm anthracite 9 080 219 9 080 220 40 Pot-and-pan drawer silver 9 007 355 9 007 356 40 height 144 mm anthracite 9 080 197 9 080 199 40 Pot-and-pan drawer silver 9 027 831 9 027 832 40 height 176 mm anthracite 9 080 628 9 080 629 40 Cabinet width Finish PU mm silver anthracite 275 0 060 753 9 079 419 10 300 0 060 754 9 079 421 10 350 0 060 755 9 079 423 10 400 0 060 756 9 079 425 10 450 0 060 757 9 079 428 10 500 0 060 758 9 079 429 10 550 0 060 759 9 079 430 10 600 0 060 760 9 079 431 10 800 0 060 761 9 079 433 10 900 0 060 762 9 079 434 10 1000 0 060 763 9 079 449 10 1200 0 060 764 9 079 453 10 Rear panel for pot-and-pan drawer, height 176 mm Powder-coated steel Cabinet width Finish PU mm silver anthracite 300 9 079 488 9 079 524 10 350 9 079 515 9 079 525 10 400 9 079 5 9 079 528 10 450 9 079 518 9 079 529 10 500 9 079 519 9 079 530 10 550 9 079 521 9 079 532 10 600 9 079 522 9 079 534 10 800 9 081 523 9 081 533 10 900 9 015 071 9 081 534 10 1000 9 081 524 9 081 535 10 1200 9 081 525 9 081 536 10 Cover cap Plastic Finish Order no. PU grey 0 060 779 80 grey with Hettich logo 9 079 220 80 dark grey 9 079 221 80 dark grey with Hettich logo 9 079 223 80 chrome finish 9 079 224 80 chrome finish with Hettich logo 9 079 225 80 stainless steel finish 9 079 227 80 stainless steel finish with Hettich logo 9 079 228 80 5.2.54 Double walled drawer system InnoTech www.hettich.com

Double walled steel drawer system InnoTech bulk packaging System components! Front connectors White plastic Assembly Order no. PU With expanding dowel 1 061 450 400 Screw-on 1 065 191 400 Front connector for lengthwise railing White plastic Assembly Order no. PU Screw-on 9 002 503 1000 Lengthwise railing for pot-and-pan drawer Complete with drawer front connection with expanding dowels Nominal powder-coated steel stainless steel PU length mm silver anthracite brushed 260 9 079 535 9 079 544 9 079 574 80 300 9 079 536 9 079 558 9 079 576 80 350 9 079 537 9 079 560 9 079 578 80 420 9 079 538 9 079 562 9 079 580 80 470 0 060 777 9 079 565 9 079 581 80 520 0 060 778 9 079 566 9 079 584 80 620 9 079 540 9 079 573 9 079 585 80 TopSide for pot-and-pan drawer, height 144 mm Nominal powder- translucent length mm coated steel, plastic silver PU PU 260 9 020 077 1 set 9 009 923 40 300 9 021 302 50 sets 9 081 870 50 350 9 011 007 50 sets 9 009 924 50 420 9 005 407 50 sets 9 008 752 100 470 9 004 087 50 sets 9 008 753 100 520 9 005 411 50 sets 9 008 754 100 620 9 006 455 1 set 9 009 926 40 TopSide for pot-and-pan drawer, height 176 mm Translucent plastic Nominal length mm Order no. PU 260 9 080 599 40 300 9 080 600 50 350 9 080 601 50 420 9 080 602 100 470 9 080 603 100 520 9 080 604 100 620 9 080 605 40 Design profile for gluing on Plastic Nominal Finish PU length mm chrome finish stainless steel finish 260 9 068 230 9 068 294 180 300 9 068 237 9 068 315 180 350 9 068 239 9 068 317 180 420 9 068 241 9 068 319 180 470 9 068 242 9 068 320 180 520 9 068 244 9 068 323 180 620 9 068 247 9 068 328 180 Aluminium drawer front for internal drawer Basic Premounted corner connectors, grey plastic Anodised silver Cabinet width Order no. mm PU 1 PU 20 300 0 041 720 9 025 977 400 0 041 722 9 025 981 450 9 079 112 9 025 982 500 0 041 730 9 025 983 600 0 041 740 9 025 984 800 0 041 750 9 047 869 900 0 041 752 9 025 985 1000 0 041 753 9 025 987 1200 9 079 114 9 025 988 Aluminium drawer front for internal pot-and-pan drawer Basic Premounted corner connectors, grey plastic Premounted crosswise railing, powder-coated steel, silver Anodised silver Cabinet width Order no. mm PU 1 PU 20 300 0 041 756 9 025 989 400 0 041 760 9 025 990 450 9 079 327 9 025 993 500 0 041 770 9 025 995 600 0 041 780 9 025 997 800 0 041 782 9 047 870 900 0 041 790 9 025 998 1000 0 041 793 9 025 999 1200 9 079 328 9 026 001 Lengthwise railing for internal pot-and-pan drawer Basic Powder-coated steel, silver Nominal length mm Order no. PU 350 1 073 718 80 420 1 063 796 80 470 1 063 797 80 520 1 063 798 80 620 9 023 000 80 Double walled drawer system InnoTech 5.2.55

Double walled wooden drawer system InnoTech for variable drawer widths/ standard cabinet widths Wooden kitchen organiser high quality, stylish and luxurious... The InnoTech wooden drawer/pot-and-pan drawer with the matching interior organisation lends a warm note to the kitchen. Available as a fixed cutlery tray in solid beech or a variable tray in wood/stainless steel, this is variable kitchen organisation in an attractive mix of materials. 5.2.56 Double walled drawer system InnoTech www.hettich.com

Double walled wooden drawer system InnoTech for variable drawer widths/ standard cabinet widths The wooden drawer/pot-and-pan drawer offers a high quality alternative to the steel drawer/pot-and-pan drawer and includes all the advantages of the system, such as toolless panel height adjustment. Double walled drawer system InnoTech 5.2.57

Double walled wooden drawer system InnoTech for variable drawer widths/ standard cabinet widths, height 70 mm Quick insertion and removal of the drawer No bottom panel machining Toolless assembly/disassembly and convenient front panel adjustment Perfect drawer action with Quadro partial or full extension; optionally with Silent System for closing quietly and gently adapted to the thickness of the cabinet sides with, 18 and 19 mm 23 Wooden drawer set, height 70 mm contains: 1 set drawer profiles, beech lacquered 2 pcs cover caps with Hettich logo Mounting material for rear panel Nominal length mm Order no. PU 260 0 042 727 1 set 300 9 079 6 1 set 350 0 042 728 1 set 420 0 042 729 1 set 470 0 042 731 1 set 520 0 042 732 1 set 620 0 042 733 1 set Cover caps with customised imprint available on request The InnoTech wooden drawer can easily be assembled with the following components: 23 Wooden drawer set, height 70 mm + Front connectors with expanding dowel or to screw-on + 24 Wooden rear panel for standard cabinet widths or 25 Corner connectors for wooden rear panel and 26 Wooden rear panel for cutting to length, mm + Quadro drawer slides see page 5.2.65 + Bottom panel, mm 23 23 24 26 25 23 Front connectors White plastic Assembly Order no. PU A With expanding dowel 0 077 911 1/40 B Screw-on 0 077 910 1/40 A B Fixing with countersunk chipboard screw ø 3,5 mm 24 Wooden rear panel for Cabinet width mm Order no. PU 25 Corner connectors for standard cabinet widths wooden rear panel 275 0 042 734 1 Beech lacquered Beech lacquered 300 0 042 736 1 400 0 042 737 1 Order no. PU 450 0 042 738 1 0 045 597 1 set 500 0 042 739 1 550 0 042 741 1 26 Wooden rear panel 600 0 042 742 1 Custom length Length 1038 mm 800 0 042 743 1 Beech lacquered 900 0 042 744 1 1000 0 042 745 1 Order no. PU Technical information see page 5.2.1 1200 0 042 746 1 9 080 221 1 5.2.58 Double walled drawer system InnoTech www.hettich.com

Double walled wooden drawer system InnoTech for variable drawer widths/ standard cabinet widths, height 70 mm Quadro V6 Silent System/ Quadro V6 Full-extension Load capacity 30 kg Quadro V6+ Silent System Full-extension Load capacity 50 kg Quadro V8 Silent System Full-extension Load capacity 70 kg Quadro 30 Part-extension Load capacity 30 kg Hole positions for Quadro/ minimum installation height For further details see page 5.2.66-5.2.70 ø4 ø6,3 97 12 9,5 36 70 ø4 ø6,3 70 103 12 9,5 42 ø4 ø6,3 108 12 9,5 47 12 70 ø4 ø6,3 94 9,5 33 70 ø3,5x12 ø3,5x12 ø3,5x12 ø3,5x12 Hole positions for front connectors A 2x ø10x12,5 A 2x ø10x12,5 A 2x ø10x12,5 A 2x ø10x12,5 4,5 40,5 32 14 32 4,5 14 46,5 51,5 4,5 32 14 32 4,5 14 37,5 KD EB KD EB KD EB KD EB From a cabinet width of 800 mm, we recommend use of the Quadro V6+ or Quadro V8 By varying the Quadro installation width (EB), 3 different cabinet side panel thicknesses (KD) can be accommodated without changing the drawer dimensions. The following dimensions apply (mm): 23 18 21 19 20 Cabinet thickness (KD) 18 19 Quadro installation width (EB) 12,5 10,5 9,5 Dimension A 23 21 20 12,5 10,5 9,5 Dimensions LT NL C Corner connectors for wooden rear panel Self-made wooden rear panel LB = inside cabinet width LB NL = nominal length LT = min. interior cabinet depth, depending on the Quadro used Size Corner connectors for Self-made wooden rear panel wooden rear panel A Bottom panel depth NL + 10 NL + 10 B Bottom panel width LB - 2 x EB - 51,5 LB - 2 x EB - 51,5 C Rear panel width LB - 2 x EB - 105 LB - 2 x EB - 25 D Rear panel height 60 60 Processing technology see group 2 B A D 2x ø3,5x12 10 14 32 60 14 ø15x12,2 60 21 ø6x18 Dimensions Order no. PU mm ø 3,5 x 12 0 045 7 200 ø 3,5 x 20 0 045 8 200 24 Double walled drawer system InnoTech 5.2.59

Double walled wooden drawer system InnoTech for variable pot-and-pan drawer widths/ standard cabinet widths, height 148,5 mm Quick insertion and removal of the drawer No bottom panel machining Toolless assembly/disassembly and convenient front panel adjustment Perfect drawer action with Quadro partial or full extension; optionally with Silent System for closing quietly and gently adapted to the thickness of the cabinet sides with, 18 and 19 mm 23 Wooden drawer set, height 70 mm contains: 1 set drawer profiles, beech lacquered 2 pcs cover caps with Hettich logo Mounting material for rear panel Nominal length mm Order no. PU 260 0 042 727 1 set 300 9 079 6 1 set 350 0 042 728 1 set 420 0 042 729 1 set 470 0 042 731 1 set 520 0 042 732 1 set 620 0 042 733 1 set Cover caps with customised imprint available on request The following components are all you need for assembling an InnoTech wooden pot-and-pan drawer: 23 Wooden drawer set, height 70 mm + Front connectors with expanding dowel or to screw-on + 27 Longitudinal railing for wooden rear panel + 28 Wooden rear panel for standard cabinet widths or 29 30 Corner clip for wooden rear panel and Wooden rear panel for cutting to length, mm + Quadro drawer slides see page 5.2.65 + Bottom panel, mm 23 23 27 28 30 29 23 Front connectors White plastic Fixing with countersunk chipboard screw ø 3,5 mm Assembly Order no. PU A With expanding dowel 0 077 911 1/40 B Screw-on 0 077 910 1/40 27 Lengthwise railing for wooden rear panel 30 Wooden rear panel Stainless steel brushed Custom length Length 1038 mm Beech lacquered Nominal length Order no. PU mm 260 9 079 620 1 set 300 9 079 621 1 set 350 9 079 625 1 set 420 9 079 627 1 set 470 9 079 629 1 set 520 9 079 631 1 set A B 28 Wooden rear panel for standard cabinet widths Beech lacquered Cabinet width Order no. PU mm 275 0 042 759 1 300 0 042 760 1 400 0 042 761 1 450 0 042 762 1 500 0 042 763 1 550 0 042 764 1 600 0 042 765 1 800 0 042 766 1 900 0 042 767 1 1000 0 042 768 1 1200 0 042 769 1 29 Corner connectors for wooden rear panel Order no. PU Beech lacquered 620 9 079 634 1 set 9 080 222 1 Order no. PU Technical information see page 5.2.1 0 045 598 1 set 5.2.60 Double walled drawer system InnoTech www.hettich.com

Double walled wooden drawer system InnoTech for variable pot-and-pan drawer widths/ standard cabinet widths, height 148,5 mm Quadro V6 Silent System/ Quadro V6 Full-extension Load capacity 30 kg Quadro V6+ Silent System Full-extension Load capacity 50 kg Quadro V8 Silent System Full-extension Load capacity 70 kg Quadro 30 Part-extension Load capacity 30 kg Hole positions for Quadro/ minimum installation height For further details see page 5.2.66-5.2.70 ø4 ø6,3 177 12 9,5 36 148,5 ø4 ø6,3 ø4 ø6,3 148,5 183 188 12 12 9,5 9,5 42 47 12 148,5 ø4 ø6,3 174 9,5 33 148,5 ø3,5x12 ø3,5x12 ø3,5x12 ø3,5x12 Hole positions for front connectors A 3x ø10x12,5 A 3x ø10x12,5 A 3x ø10x12,5 A 3x ø10x12,5 96 96 96 96 4,5 40,5 32 14 4,5 46,5 32 14 4,5 51,5 32 14 4,5 37,5 32 14 KDEB KD EB From a cabinet width of 800 mm, we recommend use of the Quadro V6+ or Quadro V8 KD EB KDEB By varying the Quadro installation width (EB), 3 different cabinet side panel thicknesses (KD) can be accommodated without changing the drawer dimensions. The following dimensions apply (mm): 23 18 21 19 20 Cabinet thickness (KD) 18 19 Quadro installation width (EB) 12,5 10,5 9,5 Dimension A 23 21 20 12,5 10,5 9,5 Dimensions LB LB = inside cabinet width NL = nominal length LT = min. interior cabinet depth, depending on the Quadro used B Size Corner connector for Self-made wooden rear panel wooden rear panel A Bottom panel depth NL + 10 NL + 10 B Bottom panel width LB - 2 x EB - 51,5 LB - 2 x EB - 51,5 C Rear panel width LB - 2 x EB - 105 LB - 2 x EB - 25 D Rear panel height 148,5 148,5 LT NL A C D Corner connector for wooden rear panel 2x ø3,5x12 9 12,5 32 10 3x ø3,5x12 10 64 64 10,5 148,5 Self-made wooden rear panel 9 12,5 32 2x 148,5 ø3,5x12 Dimensions Order no. PU mm ø 3,5 x 12 0 045 7 200 ø 3,5 x 20 0 045 8 200 21 Processing technology see group 2 Double walled drawer system InnoTech 5.2.61

Double walled steel drawer system InnoTech pantry cabinet Mounting examples Flexible hardware system for individual cabinet heights and widths Drawers/pot-and-pan drawers and internal drawers/ internal pot-and-pan drawers which are partly connected to the furniture front ensure unimpeded access to the contents Easy to use: The user does not have to move the full weight of the stored item Drawers/pot-and-pan drawers and internal drawers/ internal pot-and-pan drawers can be individually organized High load capacity (depending on the Quadro drawer slides used) Optionally with dampened closure Silent System for gentle, noiseless closing action Ideal for retrofitting in larder cabinets and pantry cabinets Cabinet heights 1900-2300 mm No. Article Quantity See catalogue page for variable for standard cabinet widths cabinet widths InnoTech drawer 1 pc 5.2.22 5.2.40 Quadro V6 Silent System 1 set 5.2.66 5.2.66 InnoTech front connectors 2 pcs 5.2.22 5.2.40 InnoTech internal pot-and-pan drawer Basic or Exclusiv 1 pc 5.2.34-5.2.37 5.2.48-5.2.51 Quadro V6 Silent System 1 set 5.2.66 5.2.66 InnoTech front panel + accessories 1 pc 5.2.34-5.2.37 5.2.48-5.2.51 InnoTech pot-and-pan drawer 1 pc 5.2.26-5.2.29 5.2.42 Quadro V6 1 set 5.2.67 5.2.67 InnoTech front connectors 2 pcs 5.2.26-5.2.29 5.2.42 InnoTech internal pot-and-pan drawer Basic or Exclusiv 1 pc 5.2.34-5.2.37 5.2.48-5.2.51 Quadro V6 Silent System 1 set 5.2.66 5.2.66 InnoTech front panel + accessories 1 pc 5.2.34-5.2.37 5.2.48-5.2.51 InnoTech pot-and-pan drawer 1 pc 5.2.26-5.2.29 5.2.42 Quadro V8 Silent System 1 set 5.2.69 5.2.69 InnoTech front connectors 2 pcs 5.2.26-5.2.29 5.2.42 Interior equipment see page 5.2.76 5.2.62 Double walled drawer system InnoTech www.hettich.com

Double walled steel drawer system InnoTech pantry cabinet Mounting examples Cabinet heights 1200-00 mm No. Article Quantity See catalogue page for variable for standard cabinet widths cabinet widths InnoTech internal drawer Basic or Exclusiv 1 pc 5.2.30-5.2.33 5.2.44-5.2.47 Quadro V6 Silent System 1 set 5.2.66 5.2.66 InnoTech front panel + accessories 1 pc 5.2.30-5.2.33 5.2.44-5.2.47 InnoTech pot-and-pan drawer 1 pc 5.2.26-5.2.29 5.2.42 Quadro V6 1 set 5.2.67 5.2.67 InnoTech front connectors 2 pcs 5.2.26-5.2.29 5.2.42 InnoTech internal pot-and-pan drawer Basic or Exclusiv 1 pc 5.2.34-5.2.37 5.2.48-5.2.51 Quadro V6 Silent System 1 set 5.2.66 5.2.66 InnoTech front panel + accessories 1 pc 5.2.34-5.2.37 5.2.48-5.2.51 InnoTech pot-and-pan drawer 1 pc 5.2.26-5.2.29 5.2.42 Quadro V8 Silent System 1 set 5.2.69 5.2.69 InnoTech front connectors 2 pcs 5.2.26-5.2.29 5.2.42 Cabinet heights 720-900 mm No. Article Quantity See catalogue page for variable for standard cabinet widths cabinet widths InnoTech drawer 1 pc 5.2.22 5.2.40 Quadro V6 Silent System 1 set 5.2.66 5.2.66 InnoTech front connectors 2 pcs 5.2.22 5.2.40 InnoTech internal pot-and-pan drawer Basic or Exclusiv 1 pc 5.2.34-5.2.37 5.2.48-5.2.51 Quadro V6 Silent System 1 set 5.2.66 5.2.66 InnoTech Front panel + accessories 1 pc 5.2.34-5.2.37 5.2.48-5.2.51 InnoTech pot-and-pan drawer 1 pc 5.2.26-5.2.29 5.2.42 Quadro V6+ Silent System 1 set 5.2.68 5.2.68 InnoTech front connectors 2 pcs 5.2.26-5.2.29 5.2.42 Interior equipment see page 5.2.76 Double walled drawer system InnoTech 5.2.63

InnoTech double-walled steel drawer system for storage cabinet Mounting example Flexible hardware system for individual cabinet heights and widths Optimum use of storage space Customised internal dividers ensure tidy, well-organised drawers High loading capacity of up to 70 kg per internal drawer/ internal pot-and-pan drawer (depending on the Quadro drawer runner used) Recommended cabinet widths 450-1200 mm, as from a cabinet width of 600 mm with 2 hinged doors Can be used with fast assembly Intermat 9956 concealed hinge, see pages 3.1.24-3.1.27 min. 50 min. 50 Intermat 9956 see page 3.1.24-3.1.27 Note: The door must be without any door protrusion! X X = depending on the internal drawer/internal pot-and-pan drawer or accessories used No. Article Quantity See catalogue page for variable for standard cabinet widths cabinet widths InnoTech internal drawer Basic or Exclusiv 1 pc 5.2.30-5.2.33 5.2.44-5.2.47 Quadro V6+ Silent System 1 set 5.2.68 5.2.68 InnoTech Front panel + accessories 1 pc 5.2.30-5.2.33 5.2.44-5.2.47 InnoTech internal pot-and-pan drawer Basic or Exclusiv 1 pc 5.2.34-5.2.37 5.2.44-5.2.47 Quadro V6+ Silent System 1 set 5.2.68 5.2.68 InnoTech front panel + accessories 1 pc 5.2.34-5.2.37 5.2.44-5.2.47 InnoTech internal pot-and-pan drawer Basic oder Exclusiv 1 pc 5.2.34-5.2.37 5.2.44-5.2.47 Quadro V6+ Silent System 1 set 5.2.68 5.2.68 InnoTech front panel + accessories 1 pc 5.2.34-5.2.37 5.2.44-5.2.47 InnoTech internal pot-and-pan drawer Basic or Exclusiv 1 pc 5.2.34-5.2.37 5.2.44-5.2.47 Quadro V6+ Silent System 1 set 5.2.68 5.2.66 InnoTech front panel + accessories 1 pc 5.2.34-5.2.37 5.2.44-5.2.47 Interior equipment see page 5.2.76 Anti-tilt block see page 5.2.73 5.2.64 Double walled drawer system InnoTech www.hettich.com

i Range summary Quadro drawer slides for InnoTech drawer opening system P 2 O (Push-To-Open) Quadro V6 Silent System Full-extension with integrated soft-close function Load capacity 30 kg 5.2.66 Quadro V6 Full-extension with integrated self-closing effect Load capacity 30 kg 5.2.67 Quadro V6+ Silent System Full-extension with integrated soft-close function Load capacity 50 kg 5.2.68 Quadro V8 Silent System Full-extension with integrated soft-close function Load capacity 70 kg 5.2.69 Quadro 30 Partial-extension with integrated self-closing effect Load capacity 30 kg 5.2.70 Drawer opening system P 2 O (Push-To-Open) for Quadro drawer slides with integrated self-closing function 5.2.71 Push-To-Open Double walled drawer system InnoTech 5.2.65

Full-extension drawer slides for InnoTech Quadro V6 Silent System Load capacity 30 kg Slide-on assembly simply place the drawer on the slides and push home Silent System the integrated dampened closure mechanism lets drawers close gently and quietly The integrated roll-out prevention stops accidental opening Perfect vertical and lateral stability. The robust, resilient tracks ensure optimal slide action through precison-guided steel balls. Maintenance-free through self-cleaning ball tracks Flexibility through interchangeability swap between Quadro partial and full-extension slides without changing cabinet, drawer or front panel dimensions! Nominal Min. cabinet depth mm Hole Order no. Order no. Order no. length drawer/ intern. drawer/ spacing mm EB 12,5 EB 10,5 EB 9,5 mm p. & p. drawer p. & p. drawer b1 PU 1 set PU 10 sets PU 1 set PU 10 sets PU 1 set PU 10 sets 260 279 288 0 0 045 298 9 079 636 0 045 304 9 079 654 0 045 309 9 079 668 300 315 324 0 9 079 229 9 079 638 9 079 230 9 079 656 9 079 231 9 079 670 350 365 374 0 0 045 299 9 079 640 0 045 305 9 079 659 0 045 310 9 079 671 420 435 444 224 0 045 301 9 079 641 0 045 306 9 079 662 0 045 311 9 079 672 470 485 494 256 0 045 302 9 079 643 0 045 307 9 079 665 0 045 312 9 079 673 520 535 544 256 0 045 303 9 079 652 0 045 308 9 079 666 0 045 313 9 079 675 Drawer/pot-and-pan drawer Cabinet front edge 37 9 32 Nominal length Usable inside length Cabinet front edge ø4 ø6,3 Internal drawer/internal pot-and-pan drawer 9 9 32 32 Cabinet front edge 12 36 37 9 32 37 b1 Min. cabinet depth = minimum number of screw-fixing positions Usable inside length = nominal length -7,7 Internal drawer/internal pot-and-pan drawer Basic = nominal length - 24 By varying the Quadro installation width (EB), 3 different cabinet side panel thicknesses (KD) can be accommodated without changing the drawer dimensions. The following dimensions apply (mm): 23 18 21 19 20 12,5 10,5 9,5 Cabinet thickness (KD) 18 19 Quadro installation width (EB) 12,5 10,5 9,5 Dimension A 23 21 20 Processing technology see group 2 Dimensions Order no. PU mm ø 6,3 x 10,5 0 051 264 200 ø 6,3 x 14 0 051 265 200 ø 4,0 x 0 010 085 200 5.2.66 Double walled drawer system InnoTech www.hettich.com

Full-extension drawer slides for InnoTech Quadro V6 Load capacity 30 kg Slide-on assembly simply place the drawer on the slides and push home Stop Control the integrated self-closing mechanism closes drawers reliably and automatically and prevents them opening inadvertently Perfect vertical and lateral stability. The robust, resilient tracks ensure optimal slide action through precison-guided steel balls. Maintenance-free through self-cleaning ball tracks Flexibility through interchangeability swap between Quadro partial and full-extension slides without changing cabinet, drawer or front panel dimensions! Can be combined with: P 2 O for Quadro see page 5.2.71 Nominal Min. cabinet depth mm Hole Order no. Order no. Order no. length drawer/ intern. drawer/ spacing mm EB 12,5 EB 10,5 EB 9,5 mm p. & p. drawer p. & p. drawer b1 PU 1 set PU sets PU 1 set PU sets PU 1 set PU sets 260 279 288 0 0 072 911 9 079 677 0 072 998 9 079 683 0 073 273 9 079 689 350 365 374 0 0 078 505 9 079 678 0 079 002 9 079 684 0 079 003 9 079 690 420 435 444 224 0 073 271 9 079 679 0 072 999 9 079 686 0 073 274 9 079 691 470 485 494 256 0 073 056 9 079 680 0 073 272 9 079 687 0 073 275 9 079 692 520 535 544 256 0 078 508 9 079 681 0 078 509 9 079 688 0 078 510 9 079 693 Drawer/pot-and-pan drawer Cabinet front edge 37 9 32 Cabinet front edge Nominal length Usable inside length ø4 ø6,3 Internal drawer/internal pot-and-pan drawer 9 32 9 32 Cabinet front edge 37 9 32 37 b1 12 36 Min. cabinet depth = minimum number of screw-fixing positions Usable inside length = nominal length -7,7 Internal drawer/internal pot-and-pan drawer Basic = nominal length - 24 By varying the Quadro installation width (EB), 3 different cabinet side panel thicknesses (KD) can be accommodated without changing the drawer dimensions. The following dimensions apply (mm): 23 18 21 19 20 12,5 10,5 9,5 Carcase thickness (KD) 18 19 Quadro installation width (EB) 12,5 10,5 9,5 Dimension A 23 21 20 Processing technology see group 2 Dimensions Order no. PU mm ø 6,3 x 10,5 0 051 264 200 ø 6,3 x 14 0 051 265 200 ø 4,0 x 0 010 085 200 Double walled drawer system InnoTech 5.2.67

Full-extension drawer slides for InnoTech Quadro V6+ Silent System Load capacity 50 kg Slide-on assembly simply place the drawer on the slides and push home Silent System the integrated dampened closure mechanism lets drawers close gently and quietly The integrated roll-out prevention stops accidental opening Perfect vertical and lateral stability. The robust, resilient tracks ensure optimal slide action through precison-guided steel balls. Maintenance-free through self-cleaning ball tracks Nominal Min. cabinet depth mm Hole Order no. Order no. Order no. length drawer/ intern. drawer/ spacing mm EB 12,5 EB 10,5 EB 9,5 mm p. & p. drawer p. & p. drawer b1 b2 PU 1 set PU 8 sets PU 1 set PU 8 sets PU 1 set PU 8 sets 300 315 324 0 9 079 070 9 079 694 9 079 077 9 079 049 9 079 081 9 079 059 350 365 374 192 9 079 074 9 079 697 9 079 079 9 079 054 9 079 083 9 079 061 420 435 444 224 0 048 354 9 079 698 0 048 357 9 079 055 0 048 360 9 079 062 470 485 494 256 0 048 355 9 079 699 0 048 358 9 079 056 0 048 361 9 079 065 520 535 544 256 0 048 356 9 079 032 0 048 359 9 079 057 0 048 362 9 079 067 620 635 644 352 64 0 040 269 9 079 044 0 040 270 9 079 058 0 040 271 9 079 068 Drawer/pot-and-pan drawer Cabinet front edge 37 9 32 Nominal length Cabinet front edge ø4 ø6,3 Usable inside length 9 32 9 32 Internal drawer/internal pot-and-pan drawer 12 42 37 9 32 37 b1 b2 Min. cabinet depth = minimum number of screw-fixing positions Usable inside length = nominal length -7,7 Internal drawer/internal pot-and-pan drawer Basic = nominal length - 24 By varying the Quadro installation width (EB), 3 different cabinet side panel thicknesses (KD) can be accommodated without changing the drawer dimensions. The following dimensions apply (mm): 23 18 21 19 20 12,5 10,5 9,5 Cabinet thickness (KD) 18 19 Quadro installation width (EB) 12,5 10,5 9,5 Dimension A 23 21 20 Processing technology see group 2 Dimensions Order no. PU mm ø 6,3 x 10,5 0 051 264 200 ø 6,3 x 14 0 051 265 200 ø 4,0 x 0 010 085 200 5.2.68 Double walled drawer system InnoTech www.hettich.com

Full-extension drawer slides for InnoTech Quadro V8 Silent System Load capacity 70 kg Slide-on assembly simply place the drawer on the slides and push home Silent System the integrated dampened closure mechanism lets drawers close gently and quietly The integrated roll-out prevention stops accidental opening Perfect vertical and lateral stability. The robust, resilient tracks ensure optimal slide action through precison-guided steel balls. Maintenance-free through self-cleaning ball tracks Nominal length Min. cabinet depth mm Hole Order no. PU mm drawer/ intern. drawer/ spacing mm EB 12,5 EB 10,5/9,5 p. & p. drawer p. & p. drawer b1 b2 470 505 514 256 0 0 044 976 0 046 689 1 set 520 535 544 256 0 0 044 979 0 046 691 1 set 620 635 644 352 128 0 044 983 0 046 692 1 set Drawer/pot-and-pan drawer Cabinet front edge 37 9 32 Nominal length Usable inside length Cabinet front edge ø4 ø6,3 Internal drawer/ internal pot-and-pan drawer 9 32 9 32 12 12 47 37 b1 b2 37 9 32 Min. cabinet depth = minimum number of screw-fixing positions Usable inside length = nominal length -7,7 Internal drawer/internal pot-and-pan drawer Basic = nominal length - 24 By varying the Quadro installation width (EB), 3 different cabinet side panel thicknesses (KD) can be accommodated without changing the drawer dimensions. The following dimensions apply (mm): 23 18 21 19 20 12,5 10,5 9,5 Cabinet thickness (KD) 18 19 Quadro installation width (EB) 12,5 10,5 9,5 Dimension A 23 21 20 Processing technology see group 2 Dimensions Order no. PU mm ø 6,3 x 10,5 0 051 264 200 ø 6,3 x 14 0 051 265 200 ø 4,0 x 0 010 085 200 Double walled drawer system InnoTech 5.2.69

Partial-extension drawer slides for InnoTech Quadro 30 Load capacity 30 kg Slide-on assembly simply place the drawer on the slides and push home Stop Control the integrated self-closing mechanism closes drawers reliably and automatically and prevents them opening inadvertently Perfect vertical and lateral stability. The robust, resilient tracks ensure optimal slide action through precison-guided steel balls. Maintenance-free through self-cleaning ball tracks Flexibility through interchangeability swap between Quadro partial and full-extension slides without changing cabinet, drawer or front panel dimensions! Can be combined with: P 2 O for Quadro see page 5.2.71 Nominal Min. cabinet depth mm Hole Extension Order no. PU length drawer/ intern. drawer/ spacing mm loss EB 12,5 EB 10,5 EB 9,5 mm p. & p. drawer p. & p. drawer b1 EL mm 260 279 288 128 50 9 079 087 9 079 106 9 079 121 19 sets 350 365 374 0 74 9 079 096 9 079 111 9 079 123 19 sets 420 435 444 256 86 9 079 097 9 079 113 9 079 124 19 sets 470 485 494 256 98 9 079 101 9 079 1 9 079 127 19 sets 520 535 544 256 110 9 079 103 9 079 117 9 079 129 19 sets Drawer/pot-and-pan drawer Cabinet front edge Cabinet front edge 37 9 32 Nominal length ø4 ø6,3 Usable inside length Internal drawer/ internal pot-and-pan drawer 9 9 33 37 9 32 EL 37 b1 Min. cabinet depth = minimum number of screw-fixing positions Usable inside length = nominal length -7,7 Internal drawer/internal pot-and-pan drawer Basic = nominal length - 24 By varying the Quadro installation width (EB), 3 different cabinet side panel thicknesses (KD) can be accommodated without changing the drawer dimensions. The following dimensions apply (mm): 23 18 21 19 20 12,5 10,5 9,5 Cabinet thickness (KD) 18 19 Quadro installation width (EB) 12,5 10,5 9,5 Dimension A 23 21 20 Processing technology see group 2 Dimensions Order no. PU mm ø 6,3 x 10,5 0 051 264 200 ø 6,3 x 14 0 051 265 200 ø 4,0 x 0 010 085 200 5.2.70 Double walled drawer system InnoTech www.hettich.com

Push-To-Open Drawer opening system P 2 O (Push-To-Open) for Quadro drawer slides with integrated self-closing function For opening handleless InnoTech drawers/pot-and-pan drawers A nudge is all it takes to open the drawer/pot-and-pan drawer Used with Quadro V6 (see page 5.2.67) or Quadro 30 (see page 5.2.70) A trial mounting is recommended Set contains: P 2 O-mechanical Screw-on panel plate ø3 Order no. PU 9 079 606 1 set 13 ø3 ø3 14,5 0-3 mm adjustable 42,5 19 85 42,5 19 41,5 85 Mounting examples! Double walled drawer system InnoTech 5.2.71

Accessories for InnoTech drawer system Side stabilizer Recommended for drawers/pot-and-pan drawers in cabinets widths of 800 mm Can be used both for variable-widths as well as for pre-assembled drawers/pot-and-pan drawers and internal drawers/ internal pot-and-pan drawers Set contains: 2 racks, plastic 1 shaft for cutting to length to fit cabinet widths up to 1200 mm, aluminium 2 cogwheels, plastic 2 supports, plastic 2 rod bearings, plastic Article Order no. PU Side stabilizer 9 079 333 1 set Drilling jig EB 12,5 9 080 311 1 Drilling jig EB 9,5/10,5 9 080 312 1 Nominal length + 33,5 EB 9,5/10,5 = inside cabinet width - 2 x EB - 37 EB 12,5 = inside cabinet width - 2 x EB - 33 Technical information see page 5.2.1 5.2.72 Double walled drawer system InnoTech www.hettich.com

Accessories for InnoTech drawer system Anti-tilt block for variable-width drawers/pot-and-pan drawers or internal drawers/pot-and-pan drawers Prevents several drawers/pot-and-pan drawers or internal drawers/internal pot-and-pan drawers from being opened at the same time Ideal anti-tilt protection on mobile pedestals or standalone elements Invisibly mounted behind the rear panel of the drawer/ pot-and-pan drawer or rear panel of the internal drawer/ pot-and-pan drawer Can only be used with Quadro drawer slides EB 12,5 Set for a maximum of 5 drawers/pot-and-pan drawers The InnoTech anti-tilt block can be assembled from the following components: + Anti-tilt block set + locking bar Stop Control/ Stop Control Plus see group 6 Set contains: 1 locking head (only required in conjunction with Stop Control Plus locking bar) 5 housings with pre-mounted glide 5 activators 5 activator holders Order no. PU 0 048 326 1 set 26,4 40 min. 75 mm for upper drawers fitting space 20,6 ø5 for drawer/pot-and-pan drawer = nominal length + 14,5 for internal drawer/internal pot-and-pan drawer = nominal length + 23,5 7 12,5 46 min. inside cabinet depth for drawer/pot-and-pan drawer = nominal length + 56 for internal drawer/internal pot-and-pan drawer = nominal length + 65 Technical information see page 5.2.1 Double walled drawer system InnoTech 5.2.73

Accessories for InnoTech drawer system Front stabiliser Front angle Front stabiliser VB 36 with ball pin For stabilising wide and/or high fronts Reinforces the connection between drawer/ pot-and-pan drawer bottom and front panel Height and side adjustment also possible with front stabiliser installed Set contains: 1 pc connecting fitting VB 36, nickel-plated zinc die-cast 1 pc ball pin Order no. PU 0 040 067 1 set 9,5 +0,5 10 20 32 12 10,5 12,5 8 Front angle For stabilising wide and/or high fronts Reinforces the connection between drawer/ pot-and-pan drawer bottom and front panel For mounting below the drawer/pot-and-pan drawer bottom panel after adjusting the front Set contains: 1 pc front angle, chromated steel 3 pcs special screw ø 5 x 14 mm 1 pc pan-head screws ø 4,0 x 12 mm Order no. PU 9 079 232 1 set 14 40 13,5 12 20 40 5.2.74 Double walled drawer system InnoTech www.hettich.com

Accessories for InnoTech drawer system Drawer bottom panels Stop attachment Drawer bottom panels Can be used in conjunction with variable-width sets for drawers, pot-and-pan drawers, internal drawers and internal pot-and-pan drawers Can be tailored to individual bottom panel dimensions For nominal lengths 260/300/350/420/470/520/620 mm For cabinet widths right up to 1200 mm Chipboard mm Surfaces identical to InnoTech preassembled drawers/ pot-and-pan drawers Top side: silver-grey Under side: white For cabinet width Dimensions mm Order no. PU 600 mm and less 500 x 630 0 013 395 1 1200 mm and less 1100 x 630 0 013 396 1 Stop attachment For 5 mm hole diameter Transparent plastic ø8 Order no. PU 9 079 298 1/1000 1,5 5,5 ø5 Stop attachment For 6 mm hole diameter Plastic 1,5 ø8 7 ø6 Finish Order no. PU white 0 025 048 1/1000 brown 0 021 154 1/1000 beige 0 047 353 1/1000 Stop attachment ø 8 mm, self-adhesive Transparent plastic Order no. PU 0 072 120 50 0 046 695 1000 Double walled drawer system InnoTech 5.2.75

Range summary InnoTech Organisation i InnoTech designer-style profile/ designer cover cap 5.2.78 Cutting board 5.2.78 OrgaTray Basic cutlery/spice tray knife/spice rack 5.2.79-5.2.82 OrgaTray Professional cutlery tray 5.2.83 OrgaTray Classic cutlery tray knife/spice rack 5.2.84-5.2.85 OrgaTray Premium cutlery tray knife/spice rack 5.2.86-5.2.89 OrgaTray Exclusiv cutlery/spice tray knife/spice rack 5.2.90-5.2.91 OrgaTray Deluxe cutlery/spice tray 5.2.92-5.2.93 InnoPlus cutlery tray 5.2.94 5.2.76 Double walled drawer system InnoTech www.hettich.com

i Range summary InnoTech Organisation OrgaWing 5.2.95 TopSide for pot-and-pan/internal pot-and-pan drawers 5.2.96-5.2.97 Railing systems 5.2.98 OrgaFlag 5.2.99 Crosswise railing/orgastore Basic 5.2.100 OrgaStore Classic 5.2.101 OrgaStore Professional 5.2.102 OrgaStore Exclusiv 5.2.103 OrgaStore Deluxe glass jar/storage container organisation rail organizer 5.2.104-5.2.105 Double walled drawer system InnoTech 5.2.77

InnoTech drawer system organisation Designer-style profile/ designer-style cover cap Cutting board Designer-style profile and cover cap Simple, effective means of distinguishing InnoTech drawers Profiles are glued on afterwards Can also be used with TopSide, see pages 5.2.96-5.2.97 Set contains: 2 design-style profiles, plastic 2 designer-style cover caps, plastic Nominal length Order no./finish PU mm chrome finish stainless steel finish 260 9 079 133 9 079 150 1 set 300 9 079 136 9 079 152 1 set 350 9 079 141 9 079 153 1 set 420 9 079 142 9 079 155 1 set 470 9 079 144 9 079 159 1 set 520 9 079 146 9 079 9 1 set 620 9 079 149 9 079 170 1 set Cutting board Suitable for InnoTech drawers and pot-and-pan drawers Slides front to back Solid beech, oiled and steamed Cabinet width Order no. PU mm 550 9 082 553 1 600 9 082 555 1 246 10 10 488/538 20 5.2.78 Double walled drawer system InnoTech www.hettich.com

InnoTech drawer system organisation Cutlery tray OrgaTray Basic 1 for drawers/internal drawers Universal application Easy to trim to size Knife and/or spice rack can be added, see page 5.2.81 Environmentally friendly: made of fully recyclable polystyrene Antistatic, easy to clean Surface finish: silver For cabinet width Width Order no./depth mm PU mm mm 380-440 441-520 581-620 263-288 175-200 0 044 968 0 044 955 1 289-338 201-250 0 044 967 0 044 954 1 339-388 251-300 0 044 966 0 044 953 1 389-438 301-350 0 044 965 0 044 952 1 439-488 351-400 0 044 964 0 044 951 1 489-538 401-450 0 044 963 0 044 949 1 539-588 451-500 0 044 962 0 044 948 1 589-638 501-550 0 044 961 0 044 947 0 044 938 1 789-838 701-750 0 044 959 0 044 946 0 044 937 1 889-938 801-850 0 044 958 0 044 945 0 044 936 1 989-1038 901-950 0 044 957 0 044 944 0 044 935 1 1189-1238 1101-1150 0 044 956 0 044 943 0 042 595 1 Partitioning Depth 380-440 Depth 441-520 * * Width 175-200 201-250 251-300 301-350 351-400 401-450 451-500 Depth 380-440 Depth 441-520 * * * * * * * * * * * Depth 581-620 * * * * * * * * * * * Width 501-550 701-750 801-850 901-950 1101-1150 * knife and spice rack can be incorporated, see page 5.2.81 Double walled drawer system InnoTech 5.2.79

InnoTech drawer system organisation Tray OrgaTray Basic 2/OrgaTray Basic 3 for drawers/internal drawers Multi-purpose tray OrgaTray Basic 2 Universal application Easy to trim to size Environmentally friendly: made of fully recyclable polystyrene Antistatic, easy to clean Surface finish: silver For cabinet width Width Order no. PU mm mm Partitioning Depth 441-520 201 Width - 250 301-350 351-400 401-450 501-550 289-338 201-250 0 044 933 1 389-438 301-350 0 044 932 1 439-488 351-400 0 044 931 1 489-538 401-450 0 044 929 1 589-638 501-550 0 044 928 1 Cutlery/spice tray OrgaTray Basic 3 Universal application Easy to trim to size Knife and/or spice rack can be added, see page 5.2.81 Environmentally friendly: made of fully recyclable polystyrene Antistatic, easy to clean Surface finish: silver Partitioning Depth 441-520 Width * * * 701-850 1101-1150 For cabinet width Width Order no. PU mm mm 789-938 701-850 9 061 547 1 1189-1238 1101-1150 9 061 546 1 * knife and spice rack can be incorporated, see page 5.2.81 Trimmed width Cut sizes for trays OrgaTray Basic 1, 2 and 3 The wide rim can be trimmed to fit drawer size. Use a circular saw and calculate tray size using the following formulae: 23 55 Trimmed width = inside cabinet width - 2 x EB - 31 When using fascia profiles = inside cabinet width - 2 x EB - 35 Trimmed depth For drawer/internal drawer Exclusiv = nominal length - 7,7 For internal drawer Basic = nominal length - 24 EB Inside cabinet width 5.2.80 Double walled drawer system InnoTech www.hettich.com

InnoTech drawer system organisation Cutlery tray OrgaTray Basic 4 for drawers/internal drawers Exclusiv Cutlery tray OrgaTray Basic 4 Designed for standard cabinet widths Knife and/or spice rack can be added, see below Environmentally friendly: made of fully recyclable polystyrene Antistatic, easy to clean Surface finish: silver Partitioning Nominal length 470 520 Width Depth 462 512 For cabinet width * * * * * 312 412 462 512 812 400 500 550 600 900 Cabinet width Order no./nominal length mm PU mm 470 520 400 9 079 172 9 079 184 1 500 9 079 173 9 079 194 1 550 9 079 174 9 079 198 1 600 9 079 178 9 079 201 1 900 9 079 191 9 079 204 1 * knife and spice rack can be incorporated, see below Accessories for OrgaTray Basic trays Knife/spice rack Beech lacquered Stainless steel containers Matches spice rack 170 60 ø50 ø48 Article Order no. PU Salt-cellar 0 080 852 1 Pepper-pot 0 080 853 1 Article Order no. PU Knife holder (knives not included) 0 074 430 1 Spice rack ø 53 mm, standing 0 044 934 1 (spices not included) Spice rack, lying flat 9 079 207 1 (spices not included) Duster, e.g. for icing sugar 0 080 854 1 Coarse duster 0 080 855 1 Fine duster 0 080 856 1 With acrylic lid 0 080 857 1 Spice shaker/mill 9 079 347 1 Fascia profile with sealing lip For clipping on at the side Plastic Tray width needs to be reduced by 4 mm For nominal length Length Order no./finish PU mm mm chrome finish stainless steel finish 470 462 9 079 222 9 079 239 2 520 512 9 079 226 9 079 241 2 620 620 9 079 236 9 079 245 2 Double walled drawer system InnoTech 5.2.81

InnoTech drawer system organisation Spice tray OrgaTray Basic 5 for drawers/internal drawers Anti-slip mat Spice tray OrgaTray Basic 5 Universal application Easy to trim to size Environmentally friendly: made of fully recyclable polystyrene Antistatic, easy to clean Surface finish: silver For cabinet width Width Order no. PU mm mm 404-453 301-350 9 061 552 1 504-553 401-450 9 061 550 1 604-653 501-550 9 061 549 1 Trimmed width Partitioning 23 Depth 441-520 31 Width 301-350 401-450 501-550 EB Inside cabinet width Cut sizes for spice tray OrgaTray Basic 5 Trimmed width = inside cabinet width - 2 x EB - 46 When using fascia profiles = inside cabinet width - 2 x EB - 50 Trimmed depth = For drawer/internal drawer Exclusiv = nominal length - 7,7 For internal drawer Basic = nominal length - 24 Anti-slip mat 5 m roll Polystyrene rubber, nobbed Trimmed width = inside cabinet width - 2 x EB - 59 For nominal length Length Order no./finish PU mm mm silver transparent 420 412 0 045 121 0 045 125 1 470 462 0 045 122 0 045 126 1 520 512 0 045 123 0 045 127 1 620 612 0 045 124 0 045 128 1 5.2.82 Double walled drawer system InnoTech www.hettich.com

InnoTech drawer system organisation Cutlery tray OrgaTray Professional for drawers/internal drawers Exclusiv Designed for standard cabinet widths Organisation can be tailored to personal needs using the variable dividers set contains two dividers per compartment Environmentally friendly: made of fully recyclable polystyrene Antistatic, easy to clean Height 60 mm Surface finish: silver Cabinet width Order no./nominal length mm PU mm 420 470 520 300 0 013 228 0 013 301 0 013 312 1 set 350 0 013 229 0 013 302 0 013 313 1 set 400 0 013 230 0 013 303 0 013 314 1 set 450 0 013 231 0 013 304 0 013 315 1 set 500 0 013 232 0 013 305 0 013 3 1 set 550 0 013 615 0 013 6 0 013 617 1 set 600 0 013 234 0 013 306 0 013 317 1 set 800 0 013 307 0 013 318 1 set 900 0 013 308 0 013 319 1 set 1000 0 013 309 0 013 320 1 set 1200 0 013 310 0 013 321 1 set Additional dividers Length Order no. PU mm 78 9 005 930 1/50 128 9 005 931 1/50 Partitioning Nominal length 420 470 520 Depth 412 462 512 Width For cabinet width 215 265 315 365 415 465 515 300 350 400 450 500 550 600 Nominal length 470 520 Depth 462 512 Width For cabinet width 715 815 915 1115 800 900 1000 1200 Fascia profile with sealing lip For clipping on at the side Plastic Tray width needs to be reduced by 4 mm For nominal length Length Order no./finish PU mm mm chrome finish stainless steel finish 470 462 9 079 222 9 079 239 2 520 512 9 079 226 9 079 241 2 Double walled drawer system InnoTech 5.2.83

InnoTech drawer system organisation Cutlery tray OrgaTray Classic 1 for drawers/internal drawers Universal application Easy to trim to size Dividers, knife and/or spice rack can be added, see page 5.2.85 Environmentally friendly: made of fully recyclable polystyrene Antistatic, easy to clean Surface finish: silver For cabinet width Width Order no./depth mm PU mm mm 380-440 441-520 581-620 260-285 175-200 9 079 249 9 079 018 1 286-335 201-250 9 079 257 9 079 019 1 336-385 251-300 9 079 258 9 079 020 1 386-435 301-350 9 079 009 9 079 022 1 436-485 351-400 9 079 010 9 079 024 1 486-535 401-450 9 079 011 9 079 025 1 536-585 451-500 9 079 012 9 079 027 1 586-635 501-550 9 079 013 9 079 028 9 079 035 1 786-835 701-750 9 079 014 9 079 030 9 079 036 1 886-935 801-850 9 079 015 9 079 031 9 079 038 1 986-1035 901-950 9 079 0 9 079 033 9 079 040 1 1186-1235 1101-1150 9 079 017 9 079 034 9 079 041 1 Trimmed width Partitioning Depth 380-440 ** ** 23 60 Depth 441-520 ** ** * * EB Inside cabinet width Depth Width 581-620 175-200 201-250 251-300 301-350 351-400 401-450 451-500 ** * 501-550 Trim sizes for cutlery tray OrgaTray Classic 1 The wide rim can be trimmed to fit drawer size. Use a circular saw and calculate tray size using the following formulae: Depth Depth 380-440 441-520 ** ** ** ** ** ** ** ** ** ** ** ** ** ** ** ** ** ** ** ** ** ** ** ** ** ** ** ** * * * * * * * * * * * * * * Trimmed width = inside cabinet width - 2 x EB - 28 When using fascia profiles Depth = inside cabinet width - 2 x EB - 32 Trimmed depth Width For drawer/internal drawer Exclusiv = nominal length - 7,7 For internal drawer Basic = nominal length - 24 * ** 581-620 ** ** ** ** ** ** ** ** ** ** ** ** ** ** * * * * * * * * * * * * * * 701-750 801-850 901-950 1101-1150 knife and spice rack can be incorporated, see page 5.2.85 dividers can be used, see page 5.2.85 5.2.84 Double walled drawer system InnoTech www.hettich.com

InnoTech drawer system organisation Cutlery tray OrgaTray Classic 2 for drawers/internal drawers Exclusiv Cutlery tray OrgaTray Classic 2 Designed for standard cabinet widths Dividers, knife and/or spice rack can be added, see below Environmentally friendly: made of fully recyclable polystyrene Antistatic, easy to clean Surface finish: silver Partitioning Nominal length 470 520 Depth 462 512 Cabinet width Order no./nominal length mm PU mm 470 520 400 9 079 043 9 079 066 1 500 9 079 046 9 079 069 1 550 9 079 048 9 079 071 1 600 9 079 052 9 079 073 1 900 9 079 064 9 079 075 1 ** ** * * ** ** ** * * * Width 315 415 465 515 815! For cabinet width 400 500 550 600 900 * ** knife and spice rack can be incorporated, see below dividers can be used, see below Accessories for cutlery trays OrgaTray Classic Stainless steel containers Matches spice rack 60 Article Material Order no. PU Knife holder beech 9079076 1 (knives not included) lacquered Spice rack, beech 9079078 1 ø 53 mm lacquered (spices not included) Dividing element plastic 9 079 080 1/2 grey Article Order no. PU Salt-cellar 0 080 852 1 Pepper-pot 0 080 853 1 Duster, e.g. for icing sugar 0 080 854 1 Coarse duster 0 080 855 1 Fine duster 0 080 856 1 With acrylic lid 0 080 857 1 ø50 Fascia profile with sealing lip For clipping on at the side Plastic Tray width must be reduced by 4 mm For nominal length Length Order no./finish PU mm mm chrome finish stainless steel finish 470 462 9 079 222 9 079 239 2 520 512 9 079 226 9 079 241 2 620 620 9 079 236 9 079 245 2 Double walled drawer system InnoTech 5.2.85

201 InnoTech drawer system organisation Cutlery tray OrgaTray Premium 1 for drawers/internal drawers Universal application Easy to trim to size Knife and/or spice rack can be added, see page 5.2.87 Environmentally friendly: made of fully recyclable polystyrene Antistatic, easy to clean Surface finish: anthracite For cabinet width Width Order no./depth mm PU mm mm 380-440 441-520 581-620 263-288 175-200 9 079 082 9 079 156 1 289-338 201-250 9 079 085 9 079 158 1 339-388 251-300 9 079 086 9 079 1 1 389-438 301-350 9 079 088 9 079 2 1 439-488 351-400 9 079 091 9 079 3 1 489-538 401-450 9 079 093 9 079 4 1 539-588 451-500 9 079 095 9 079 5 1 589-638 501-550 9 079 098 9 079 7 9 079 185 1 789-838 701-750 9 079 099 9 079 179 9 079 186 1 889-938 801-850 9 079 100 9 079 180 9 079 187 1 989-1038 901-950 9 079 102 9 079 181 9 079 188 1 1189-1238 1101-1150 9 079 154 9 079 183 9 079 189 1 Trimmed width Partitioning Depth 380-440 - 250 * 23 55 Depth 441-520 EB Inside cabinet width Trim sizes for cutlery tray OrgaTray Premium 1 The wide rim can be trimmed to fit drawer size. Use a circular saw and calculate tray size using the following formulae: Depth Width Depth Depth 581-620 380-440 441-520 * 175-200 201-250 * 251-300 301-350 351-400 ** 401-450 451-500 * ** 501-550! Trimmed width = inside cabinet width - 2 x EB - 31 When using fascia profiles = inside cabinet width - 2 x EB - 35 Trimmed depth For drawer/internal drawer Exclusiv = nominal length - 7,7 For internal drawer Basic = nominal length - 24 * Depth Width 581-620 * * * * * * * 701-750 801-850 901-950 knife and spice rack can be incorporated, see page 5.2.87 1101-1150 5.2.86 Double walled drawer system InnoTech www.hettich.com

InnoTech drawer system organisation Cutlery tray OrgaTray Premium 2 for drawers/internal drawers Exclusiv Cutlery tray OrgaTray Premium 2 Designed for standard cabinet widths Knife and/or spice rack can be added, see below Environmentally friendly: made of fully recyclable polystyrene Antistatic, easy to clean Surface finish: anthracite Partitioning Nominal length 470 520 * Depth 462 512 Width For cabinet width * * 312 412 462 512 812 400 500 550 600 900 knife and spice rack can be incorporated, see below Cabinet width Order no./nominal length mm PU mm 470 520 400 9 079 190 9 079 197 1 500 9 079 192 9 079 199 1 550 9 079 193 9 079 200 1 600 9 079 195 9 079 202 1 900 9 079 196 9 079 203 1 Accessories for OrgaTray Premium trays Knife/spice rack Beech lacquered Stainless steel containers Matches spice rack 60 ø50 Article Order no. PU Knife holder type 1 (knives not included) 9 079 205 1 Spice rack, ø 53 mm type 1 (spices not included) 9 079 206 1 Knife holder type 2 (knives not included) 9 080 244 1 Spice rack, ø 53 mm type 2 (spices not included) 9 080 245 1 Article Order no. PU Salt-cellar 0 080 852 1 Pepper-pot 0 080 853 1 Duster, e.g. for icing sugar 0 080 854 1 Coarse duster 0 080 855 1 Fine duster 0 080 856 1 With acrylic lid 0 080 857 1 Fascia profile with sealing lip For clipping on at the side Plastic Tray width must be reduced by 4 mm For nominal length Length Order no./finish PU mm mm chrome finish stainless steel finish 470 462 9 079 222 9 079 239 2 520 512 9 079 226 9 079 241 2 620 620 9 079 236 9 079 245 2 Double walled drawer system InnoTech 5.2.87

201 InnoTech drawer system organisation Cutlery tray OrgaTray Premium 1 for drawers/internal drawers Universal application Easy to trim to size Knife and/or spice rack can be added, see page 5.2.89 Environmentally friendly: made of fully recyclable polystyrene Antistatic, easy to clean Surface stainless steel finish For cabinet width Width Order no./depth mm PU mm mm 380-440 441-520 581-620 263-288 175-200 9 080 313 9 079 396 1 289-338 201-250 9 079 315 9 079 401 1 339-388 251-300 9 079 3 9 079 403 1 389-438 301-350 9 079 317 9 079 406 1 439-488 351-400 9 079 318 9 079 407 1 489-538 401-450 9 079 319 9 079 409 1 539-588 451-500 9 079 320 9 079 410 1 589-638 501-550 9 079 321 9 079 413 9 079 266 1 789-838 701-750 9 079 322 9 079 415 9 079 267 1 889-938 801-850 9 079 323 9 079 262 9 079 268 1 989-1038 901-950 9 079 324 9 079 264 9 079 270 1 1189-1238 1101-1150 9 079 395 9 079 265 9 079 271 1 Trimmed width Partitioning Depth 380-440 - 250 * 23 55 Depth 441-520 EB Inside cabinet width Trim sizes for cutlery tray OrgaTray Premium 1 The wide rim can be trimmed to fit drawer size. Use a circular saw and calculate tray size using the following formulae: Depth Width Depth Depth 581-620 380-440 441-520 * 175-200 201-250 * 251-300 301-350 351-400 ** 401-450 451-500 * ** 501-550! Trimmed width = inside cabinet width - 2 x EB - 31 When using fascia profiles = inside cabinet width - 2 x EB - 35 Trimmed depth For drawer/internal drawer Exclusiv = nominal length - 7,7 For internal drawer Basic = nominal length - 24 * Depth Width 581-620 * * * * * * * 701-750 801-850 901-950 knife and spice rack can be incorporated, see page 5.2.89 1101-1150 5.2.88 Double walled drawer system InnoTech www.hettich.com

InnoTech drawer system organisation Cutlery tray OrgaTray Premium 2 for drawers/internal drawers Exclusiv Cutlery tray OrgaTray Premium 2 Designed for standard cabinet widths Knife and/or spice rack can be added, see below Environmentally friendly: made of fully recyclable polystyrene Antistatic, easy to clean Surface stainless steel finish Partitioning Nominal length 470 520 * Depth 462 512 Width For cabinet width * * 312 412 462 512 812 400 500 550 600 900 knife and spice rack can be incorporated, see below Cabinet width Order no./nominal length mm PU mm 470 520 400 9 079 272 9 079 337 1 500 9 079 273 9 081 213 1 550 9 079 334 9 078 868 1 600 9 079 335 9 080 242 1 900 9 079 336 9 080 243 1 Accessories for OrgaTray Premium trays Knife/spice rack Beech lacquered Stainless steel containers Matches spice rack 60 ø50 Article Order no. PU Knife holder type 1 (knives not included) 9 079 205 1 Spice rack, ø 53 mm type 1 (spices not included) 9 079 206 1 Knife holder type 2 (knives not included) 9 080 244 1 Spice rack, ø 53 mm type 2 (spices not included) 9 080 245 1 Article Order no. PU Salt-cellar 0 080 852 1 Pepper-pot 0 080 853 1 Duster, e.g. for icing sugar 0 080 854 1 Coarse duster 0 080 855 1 Fine duster 0 080 856 1 With acrylic lid 0 080 857 1 Fascia profile with sealing lip For clipping on at the side Plastic Tray width must be reduced by 4 mm For nominal length Length Order no./finish PU mm mm chrome finish stainless steel finish 470 462 9 079 222 9 079 239 2 520 512 9 079 226 9 079 241 2 620 620 9 079 236 9 079 245 2 Double walled drawer system InnoTech 5.2.89

InnoTech drawer system organisation Use of OrgaTray Exclusiv 1/Exclusiv 2 for drawers/internal drawers Exclusiv Cutlery tray OrgaTray Exclusiv 1 Designed for standard cabinet widths Cabinet widths of up to 1200 mm can be organised by combining several cutlery/spice trays and universal boxes Can be extended by knife, spice or foil holder, see below Beech lacquered 8 48 56 3 Partitioning Cabinet width Order no./nominal length mm PU mm 470 520 400 0 046 104 0 046 109 1 450 0 046 105 0 046 111 1 500 0 046 106 0 046 112 1 550 9 079 208 9 079 348 1 600 0 046 108 0 046 114 1 900 9 067 742 9 079 209 1 Nominal length 470 520 Depth 462 512 100 100 100 67 100 67 100 200 Width For cabinet width 312 362 400 450 412 462 500 550 512 600 812 900 Accessories for adding width Beech lacquered / Nominal length 470 520 Depth 462 512 67/ 7 Width Nominal width 188 200 88/188 100/200 Article Nominal width Order no./nominal length mm PU mm 470 520 Spice tray 200 0 046 121 0 046 117 1 Universal tray 100 0 046 127 0 046 129 1 Universal tray 200 0 046 128 0 046 131 1 Spice tray OrgaTray Exclusiv 2 Cabinet widths of up to 1200 mm can be organised by combining several cutlery/spice trays and universal boxes Beech lacquered Nominal length 470 520 Width For cabinet width Depth 462 512 312/412/512 400/500/600 Cabinet width Order no./nominal length mm PU mm 470 520 400 0 046 122 0 046 118 1 500 9 079 215 9 079 2 1 600 9 079 218 9 079 219 1 5.2.90 Double walled drawer system InnoTech www.hettich.com

InnoTech drawer system organisation Accessories for OrgaTray Exclusiv Combination examples When using a combination of several trays: Cabinet width 800 Cutlery tray 400 Universal tray 100 Spice tray 400 Cabinet width 1000 Cutlery tray 400 Spice tray 200 Cutlery tray 500 Cutlery tray 600 Universal tray 100 Spice tray 400 Cutlery tray 500 Universal tray 200 Spice tray 400 Cabinet width 1200 Cutlery tray 600 Universal tray 100 Cutlery tray 600 Cutlery tray 600 Universal tray 100 Spice tray 600 Accessories for fitting into cutlery tray OrgaTray Exclusiv 1/universal tray Beech lacquered/stainless steel Stainless steel containers Matches spice tray/rack 170 60 Article Width Order no./ PU mm nominal length mm 470 520 Knife holder 99 0 046 115 0 046 1 1 Spice rack ø 53 66 9 079 210 9 079 211 1 Roll holder 66 9 079 212 9 079 214 1 ø50 Article Order no. PU Salt-cellar 0 080 852 1 Pepper-pot 0 080 853 1 Duster, e.g. for icing sugar 0 080 854 1 Coarse duster 0 080 855 1 Fine duster 0 080 856 1 With acrylic lid 0 080 857 1 Spice shaker/mill 9 079 347 1 ø48 Double walled drawer system InnoTech 5.2.91

InnoTech drawer system organisation Cutlery tray OrgaTray Deluxe 1 for drawers/internal drawers Exclusiv Designed for standard cabinet widths With variable dividers for customised organisation Set contains: 6 stainless-steel profiles 2 side rails, beech lacquered Dividing elements, beech lacquered Cabinet width Number of Order no./nominal length mm PU mm dividing elements 470 520 620 400 5 0 046 421 0 046 429 0 046 659 1 set 450 5 0 046 422 0 046 431 0 046 660 1 set 500 7 0 046 423 0 046 432 0 046 661 1 set 550 7 9 080 303 9 080 304 9 080 305 1 set 600 7 0 046 424 0 046 433 0 046 662 1 set 800 7 0 046 425 0 046 434 0 046 663 1 set 900 10 0 046 426 0 046 435 0 046 664 1 set 1000 10 0 046 427 0 046 436 0 046 665 1 set 1200 10 0 046 428 0 046 437 0 046 666 1 set Partitioning Nominal length 470 520 620 Depth 462 512 612 Width 320 370 420 470 520 720 For cabinet width 400 450 500 550 600 800 Nominal length 470 520 620 Depth 462 512 612 Width For cabinet width 820 920 900 1000 1120 1200 5.2.92 Double walled drawer system InnoTech www.hettich.com

InnoTech drawer system organisation Spice tray OrgaTray Deluxe 2 for drawers/internal drawers Exclusiv Designed for standard cabinet widths With variable dividers for customised organisation Set contains: 4 stainless-steel profiles 2 side rails, beech lacquered 2 cross-rails, beech lacquered 2 spice racks, beech lacquered 2 longitudinal dividers, beech lacquered 10 spice jars, stainless steel Dividing elements, beech lacquered Cabinet width Number of Order no./nominal length mm PU mm dividing elements 470 520 620 550 3 9 080 306 9 080 307 9 080 308 1 set 600 3 0 046 467 0 046 473 0 046 667 1 set 800 5 0 046 468 0 046 474 0 046 668 1 set 900 7 0 046 469 0 046 475 0 046 669 1 set 1000 7 0 046 471 0 046 476 0 046 670 1 set 1200 7 0 046 472 0 046 477 0 046 671 1 set Partitioning Nominal length 470 520 620 Depth 462 512 612 Width For cabinet width 470 550 520 600 720 800! Nominal length 470 520 620 Depth 462 512 612 Width For cabinet width 820 920 900 1000 1120 1200 Double walled drawer system InnoTech 5.2.93

InnoTech drawer system organisation Cutlery tray InnoPlus for drawers/internal drawers Exclusiv Designed for standard cabinet widths For nominal length 470 and 520 mm Elements simply push together Set including anti-slip mat, silver burled Environmentally friendly: made of 100% recyclable steel Powder-coated steel, silver Partitioning Cabinet width mm Order no. PU 300 1 069 953 1 400 1 069 954 1 450 1 069 955 1 500 1 069 956 1 600 1 069 957 1 800 1 081 997 1 900 1 081 998 1 1000 1 082345 1 Nominal length 470 Depth 462 Width 220 320 370 420 520 For cabinet width 300 400 450 500 600 Nominal length 470 Depth 462 Width For cabinet width 720 820 800 900 920 1000 Assembly 50 Secured with 2 wooden strips* Nominal length 520 *InnoPlus can also be used in drawers with 520 mm nominal length, but then needs to be held in place by 2 wooden strips. 5.2.94 Double walled drawer system InnoTech www.hettich.com

InnoTech drawer system organisation Pop-out compartments OrgaWing Provides InnoTech pot-and-pan drawers, 144 mm height, with an additional swing-out storage level above the railing. The moving compartments automatically swing out to the side when the pot-and-pan drawer is opened. They gently glide back to the home position on closing the drawer. Suitable for cabinet widths of 800 mm and over For nominal length 470 mm Set contains: 2 pop-out compartments, plastic silver 2 turning mechanisms, right/left 2 lateral guide rollers 2 support rollers 2 end stops Order no. PU 0 049 084 1 set Minimum installation height 140 Position for screw-mounting side guiding roller 230 32 8 144 187 470 252 Double walled drawer system InnoTech 5.2.95

InnoTech drawer system organisation TopSide for pot-and-pan drawers, height 144/176 mm and internal pot-and-pan drawers Exclusiv, height 144 mm Closes off the sides between railing and drawer profile Attractive design Easy to install Can be retrofitted Nominal length mm Height mm Order no./finish PU powder-coated translucent satin steel, silver plastic glass* 260 144 9 020 077 9 079 462 9 079 386 1 set 300 144 9 079 443 9 079 468 9 079 391 1 set 350 144 9 014 708 9 079 471 9 079 393 1 set 420 144 9 005 408 0 041 071 9 079 398 1 set 470 144 9 004 315 0 041 072 9 079 400 1 set 520 144 9 005 412 0 041 073 9 079 405 1 set 620 144 9 006 455 0 041 074 9 079 418 1 set 260 176 9 079 489 1 set 300 176 9 079 490 1 set 350 176 9 079 491 1 set 420 176 9 079 492 1 set 470 176 9 079 493 1 set 520 176 9 079 494 1 set 620 176 9 079 495 1 set * please order TopSide universal adapter separately TopSide universal adapter For using TopSide in satinised glass or materials of personal choice Plastic Set contains: 2 front pieces left/right 2 rear elements left/right Nominal length - 28 59,5 4 Finish Order no. PU grey 9 079 648 1 set aluminium finish 9 079 426 1 set stainless steel finish 9 079 432 1 set 5.2.96 Double walled drawer system InnoTech www.hettich.com

InnoTech drawer system organisation TopSide for internal pot-and-pan drawers Basic, height 144 mm Anti-slip mat TopSide for internal pot-and-pan drawers Basic, height 144 mm Closes off the sides between railing and drawer profile Attractive design Easy to install Can be retrofitted Translucent plastic Nominal length mm Order no. PU 350 9 079 496 1 set 420 9 079 498 1 set 470 9 079 501 1 set 520 9 079 504 1 set 620 9 079 507 1 set TopSide front for internal pot-and-pan drawers Basic, height 144 mm Closes off the front between aluminium profile and railing Attractive design Easy to install Can be retrofitted Translucent plastic Cabinet widths mm Order no. PU 300 0 045 839 1 400 0 045 841 1 450 0 045 842 1 500 0 045 843 1 600 0 045 844 1 900 0 045 845 1 1000 0 045 846 1 1200 0 045 847 1 Anti-slip mat 5 m roll Polystyrene rubber, nobbed Trimmed width = inside cabinet width - 2 x EB - 59 Nominal length Length Order no./finish PU mm mm silver transparent 420 412 0 045 121 0 045 125 1 470 462 0 045 122 0 045 126 1 520 512 0 045 123 0 045 127 1 620 612 0 045 124 0 045 128 1 Double walled drawer system InnoTech 5.2.97

InnoTech drawer system organisation Railing systems Add-on set, lengthwise railing The 70 mm height drawer set see page 5.2.22-5.2.23 - can be turned into a variable-width pot-and-pan drawer with wooden rear panel using the add-on lengthwise railing set Any rear panel height and number of railings can be selected to meet personal needs A Inside cabinet width - 2 x EB - 63 9 6,5 12,5 14 ø10x12,5 14 32 2x ø3,5 X A X - 52,5 Set contains: 1 set lengthwise railing with adapter for wooden rear panel 2 front connectors for lengthwise railings, white plastic 2x ø3,5x12 KD EB Inside cabinet width EB KD Nominal length Order no./finish PU mm powder-coated steel, stainless steel silver brushed 470 0 010 048 9 079 629 1 set 520 0 010 049 9 079 631 1 set 620 0 010 050 9 079 634 1 set Add-on set, 2nd railing level A 2nd railing level can be added quickly and easily to pot-and-pan drawers Crosswise railing must be ordered separately, see below Set contains: 1 set of corner posts, grey plastic 2 lengthwise railings, powder-coated steel, silver 2 front connectors for lengthwise railings, white plastic * 64 see pot-andpan drawer height 144 or height 176 mm A inside cabinet width 2 x EB 41 * Nominal length mm Order no. PU 260 9 079 510 1 set 300 9 079 435 1 set 350 0 010 014 1 set 420 0 010 015 1 set 470 0 010 0 1 set 520 0 010 017 1 set 620 0 010 018 1 set KD EB Crosswise railing for 2nd railing level Length 1140 mm Order no. PU 0 077 924 1/5 5.2.98 Double walled drawer system InnoTech www.hettich.com

InnoTech drawer system organisation Organiser system OrgaFlag for pot-and-pan drawers/internal pot-and-pan drawers Exclusiv OrgaFlag organiser system Designed for standard cabinet widths Additional OrgaFlag perforated profiles also permit the construction of other drawer widths in 50 mm intervals Silver-grey plastic Set contains: 2 fascia profiles left/right Perforated profiles OrgaFlags with pre-mounted threaded pin Cabinet width Number of Order no./nominal length mm PU mm OrgaFlags 470 520 550 4 0 069 849 0 069 850 1 set 600 4 0 048 791 0 048 794 1 set 800 5 0 048 792 0 049 078 1 set 900 6 0 048 793 0 049 079 1 set Additional OrgaFlag Silver-grey plastic Perforated profile for OrgaFlag Silver-grey plastic Order no. PU 0 049 080 1 Nominal length mm Order no. PU 470 9 079 412 1 520 9 079 527 1 158 146 12 Double walled drawer system InnoTech 5.2.99

InnoTech drawer system organisation Crosswise railing Organiser system OrgaStore Basic Crosswise railing For pot-and-pan and internal pot-and-pan drawers Custom length Length 1140 mm Powder-coated steel, silver Mount for crosswise railing Grey plastic * inside cabinet width 2 x EB 41 * Article Order no. PU Crosswise railing 0 077 924 1/ 5 Mount for crosswise railing 0 077 925 1/40 Organiser system OrgaStore Basic For pot-and-pan drawers, 144 mm height/ internal pot-and-pan drawers Designed for standard cabinet widths Can also be used for customised drawer widths by shortening the crosswise railing Set contains: 1 crosswise railing, powder-coated steel, silver 2 mounts for crosswise railing, grey plastic Organisation elements, grey plastic *! For cabinet width Number of organisation Order no. PU mm elements 450 4 9 005 266 1 set 500 5 9 005 267 1 set 600 6 9 005 268 1 set 800 8 9 005 269 1 set 900 9 9 005 270 1 set 1000 10 9 005 271 1 set inside cabinet width 2 x EB 41 * Additional organisation element Order no. PU 0 013 292 1 set 5.2.100 Double walled drawer system InnoTech www.hettich.com

InnoTech drawer system organisation Organiser system OrgaStore Classic for (internal) pot-and-pan drawers, 144 mm height OrgaStore Classic organiser system Tailored to standard cabinet widths Can also be used for customised drawer widths by shortening the aluminium partition Set contains: 1 aluminium partition Organisation elements, grey plastic Support pieces, black plastic * inside cabinet width 2 x EB 238 * Cabinet width Number of Number of Order no. PU mm organisation support pieces elements 600 5 3 9 005 289 1 set 800 6 4 9 005 290 1 set 900 7 5 9 005 291 1 set 1000 7 5 9 005 292 1 set 1200 8 6 9 005 293 1 set Additional organisation element Set contains: 1 organisation element with cap, grey plastic 1 support piece, black plastic Order no. PU 0 013 292 1 set Double walled drawer system InnoTech 5.2.101

Organiser system OrgaStore Professional for pot-and-pan drawers, 144 mm height/ internal pot-and-pan drawers Exclusiv OrgaStore Professional organiser system Tailored to standard cabinet widths Can also be used for customised drawer widths by shortening the aluminium partition Set contains: 1 set glass holder, silver-grey plastic 1 set TopSide, powder-coated steel, silver 6 glass jars with blue lid 2 aluminium partitions Dividing elements, grey plastic Cabinet width Number of Order no./ PU mm dividing elements nominal length mm 470 520 600 1 9 004 123 9 005 300 1 set 800 2 9 004 124 9 005 301 1 set 900 3 9 004 125 9 005 302 1 set 1000 4 9 004 126 9 005 303 1 set 1200 5 9 004 127 9 005 304 1 set Additional dividing element Grey plastic Order no. PU 0 013 397 1 Glass jar with blue lid Set consists of 4 glasses Order no. PU 1 081 864 1 set! Inside cabinet width - 2 x EB - 329 6 EB Inside cabinet width EB 5.2.102 Double walled drawer system InnoTech www.hettich.com

InnoTech drawer system organisation Perforated panel OrgaStore Exclusiv 1/Exclusiv 2 for pot-and-pan drawers/internal pot-and-pan drawers Perforated hardboard OrgaStore Exclusiv 1 Tailored to standard cabinet widths Multiplex beech, varnished Dividing rails need to be ordered separately, see below 190 175 15 Cabinet width Order no./nominal length mm PU mm 470 520 600 0 046 159 0 046 5 1 800 0 046 1 0 046 6 1 900 0 046 2 0 046 7 1 1000 0 046 3 0 046 8 1 1200 0 046 4 0 046 9 1 Perforated hardboard OrgaStore Exclusiv 2 For cutting to size Dimensions 1100 x 630 mm Multiplex beech, varnished Dividing rails need to be ordered separately, see below Order no. PU 0 046 171 1 15 8 8 Trimmed width Trimmed width = inside cabinet width - 2 x EB - 48 Trimmed depth = For pot-and-pan drawer/internal pot-and-pan drawer Exclusiv = nominal length - 7,7 For internal pot-and-pan drawer Basic = nominal length - 24 Dividing rail for perforated panel OrgaStore Exclusiv With pre-mounted dowel Beech lacquered Order no. PU 0 046 172 1/ 6 0 046 173 1/12 Double walled drawer system InnoTech 5.2.103

InnoTech drawer system organisation Organiser system OrgaStore Deluxe 1 for pot-and-pan drawers/internal pot-and-pan drawers Exclusiv Organiser system OrgaStore Deluxe 1 Tailored to standard cabinet widths With variable dividers for customised organisation Set contains: 4 stainless steel profiles 2 cross-rails, beech lacquered 2 longitudinal dividers, beech lacquered 2 side rails, beech lacquered Dividing elements, beech lacquered Divider for organising glass jars/ storage containers, beech lacquered Cabinet width Number of Number of dividers for organising Order no./nominal length mm PU mm dividing elements glass jars/storage containers 470 520 620 600 3 3 0 046 438 0 046 444 0 046 672 1 set 800 5 6 0 046 439 0 046 445 0 046 673 1 set 900 5 6 0 046 441 0 046 446 0 046 674 1 set 1000 7 6 0 046 442 0 046 447 0 046 675 1 set 1200 7 6 0 046 443 0 046 448 0 046 676 1 set Partitioning Nominal length 470 520 620 Depth 462 512 612 Width For cabinet width 520 600 720 800 Nominal length 470 520 620 Depth 462 512 612 Width For cabinet width 820 920 900 1000 1120 1200 Storage container with lid For use in organiser system OrgaStore Deluxe 1 Stainless steel with acrylic lid 0 Order no. PU 9 079 533 1 ø120 5.2.104 Double walled drawer system InnoTech www.hettich.com

Organiser system OrgaStore Deluxe 2/3 for pot-and-pan drawers/ internal pot-and-pan drawers Exclusiv Tailored to standard cabinet widths With variable dividers for customised organisation Set contains: 2 side rails, beech 2 dividers, beech 3 railings for dividers, stainless steel Organiser system OrgaStore Deluxe 2 for pot-and-pan drawers, 144 mm height/internal pot-and-pan drawers Exclusiv Cabinet width Order no./nominal length mm PU mm 470 520 620 400 9 079 233 9 079 248 9 079 340 1 set 450 9 079 234 9 079 250 9 079 341 1 set 500 9 079 235 9 079 252 9 079 342 1 set 550 9 079 237 9 079 253 9 079 343 1 set 600 9 079 238 9 079 254 9 079 344 1 set 800 9 079 240 9 079 255 9 079 345 1 set 900 9 079 242 9 080 223 9 079 346 1 set 1000 9 079 244 9 079 338 9 079 364 1 set 1200 9 079 246 9 079 339 9 079 369 1 set Additional divider for OrgaStore Deluxe 2 Beech lacquered Order no. PU 9 079 589 1 Organiser system OrgaStore Deluxe 3 for pot-and-pan drawers, height 176 mm Cabinet width Order no./nominal length mm PU mm 470 520 620 400 9 079 539 9 079 549 9 079 572 1 set 450 9 079 541 9 079 550 9 079 577 1 set 500 9 079 542 9 079 552 9 079 582 1 set 550 9 080 309 9 079 213 9 079 217 1 set 600 9 079 543 9 079 556 9 079 586 1 set 800 9 079 545 9 079 559 9 079 588 1 set 900 9 079 546 9 079 563 9 079 592 1 set 1000 9 079 547 9 079 568 9 079 594 1 set 1200 9 079 548 9 079 569 9 079 596 1 set Additional divider for OrgaStore Deluxe 3 Beech lacquered Order no. PU 9 079 602 1 Double walled drawer system InnoTech 5.2.105

Double-walled steel drawer system InnoTech preassembled under-sink drawer OrgaFlex with plastic containers For utilising the space below the sink Freely positionable and removable plastic containers provide additional storage space to the right and/or left of the siphon and flexibly adapt to the specific situation they are used in Designed for standard cabinet widths Nominal length 470 mm The following components are all you need for assembling an InnoTech drawer for sink cabinets: 31 OrgaFlex preassembled drawer for sink cabinets + Front connectors with expanding dowel or to screw-on + Quadro drawer slides see page 5.2.65 31 Preassembled drawer for sink cabinets OrgaFlex 31 Cabinet width Number of Order no. PU mm OrgaFlex plastic containers 550 2 0 069 848 1 600 2 0 049 081 1 800 3 0 049 082 1 900 4 0 049 083 1 Front connectors White plastic Assembly Order no. PU A With expanding dowel 0 077 911 1/40 B Screw-on 0 077 910 1/40 A B Fixing with countersunk chipboard screw ø 3,5 mm Additional plastic container With lid and support Plastic Order no. PU 9 053 342 1 5.2.106 Double walled drawer system InnoTech www.hettich.com

Double-walled steel drawer system InnoTech preassembled under-sink drawer OrgaFlex with plastic containers Quadro V6 Silent System/ Quadro V6 Full-extension Load capacity 30 kg Quadro V6+ Silent System Full-extension Load capacity 50 kg Quadro V8 Silent System Full-extension Load capacity 70 kg Quadro 30 Part-extension Load capacity 30 kg Hole positions for Quadro/ minimum installation height ø4 ø6,3 ø4 ø6,3 ø4 ø6,3 ø4 ø6,3 For further details see page 5.2.66-5.2.70 204 144 210 144 215 144 201 144 12 9,5 36 42 12 9,5 12 9,5 47 12 33 9,5 ø3,5x12 ø3,5x12 ø3,5x12 ø3,5x12 Hole positions for front connectors A 3x ø10x12,5 A 3x ø10x12,5 A 3x ø10x12,5 A 3x ø10x12,5 96 96 96 96 4,5 40,5 32 14 4,5 46,5 32 14 51,5 4,5 32 14 4,5 37,5 32 14 KD EB KD EB From a cabinet width of 800 mm, we recommend use of the Quadro V6+ or Quadro V8 KD EB KD EB By varying the Quadro installation width (EB), 3 different cabinet side panel thicknesses (KD) can be accommodated without changing the drawer dimensions. The following dimensions apply (mm): 23 18 21 19 20 Cabinet thickness (KD) 18 19 Quadro installation width (EB) 12,5 10,5 9,5 Dimension A 23 21 20 12,5 10,5 9,5 250 0 110 5 180 80 6 Double walled drawer system InnoTech 5.2.107

Double-walled steel drawer system InnoTech preassembled under-sink drawer Cut-out railing for under-sink drawer InnoTech preassembled drawer for sink cabinets For utilising the space below the sink Designed for a standard 900 mm cabinet width Nominal length 470 mm Powder-coated steel, silver The following components are all you need for assembling an InnoTech drawer for sink cabinet: 32 Preassembled drawer for sink cabinets + Front connectors with expanding dowel or to screw-on + Quadro drawer slides see page 5.2.65 32 Preassembled drawer for sink cabinets Order no. PU 0 043 006 1 32 Cut-out railing for under-sink drawer For utilising the space below the sink For customised drawer widths The following components are all you need for assembling an InnoTech drawer for sink cabinets: 33 Cut-out railing for under-sink drawer + Pot-and-pan drawer set, height 144 mm see pages 5.2.26-5.2.27 + Front connectors with expanding dowel or to screw-on + Aluminium rear panel see pages 5.2.26-5.2.27 or Wooden rear panel, mm + Quadro drawer slides see page 5.2.65 + Bottom panel, mm 33 Order no. PU 0 040 119 1 Cut sizes for the drawer base see page 5.2.109 Front connectors White plastic Assembly Order no. PU A With expanding dowel 0 077 911 1/40 B Screw-on 0 077 910 1/40 A B Fixing with countersunk chipboard screw ø 3,5 mm 5.2.108 Double walled drawer system InnoTech www.hettich.com

Double-walled steel drawer system InnoTech preassembled under-sink drawer Cut-out railing for under-sink drawer Quadro V6 Silent System/ Quadro V6 Full-extension Load capacity 30 kg Quadro V6+ Silent System Full-extension Load capacity 50 kg Quadro V8 Silent System Full-extension Load capacity 70 kg Quadro 30 Part-extension Load capacity 30 kg Hole positions for Quadro/ minimum installation height For further details see page 5.2.66-5.2.70 177 ø4 ø6,3 12 9,5 144 183 ø4 ø6,3 12 9,5 144 188 ø4 ø6,3 12 9,5 144 174 ø4 ø6,3 9,5 144 36 42 47 12 33 ø3,5x12 ø3,5x12 ø3,5x12 ø3,5x12 Hole positions for front connectors A 3x ø10x12,5 A 3x ø10x12,5 A 3x ø10x12,5 A 3x ø10x12,5 96 96 96 96 4,5 40,5 32 14 46,5 4,5 32 14 51,5 4,5 32 14 4,5 37,5 32 14 KD EB KD EB From a cabinet width of 800 mm, we recommend use of the Quadro V6+ or Quadro V8 KD EB KD EB By varying the Quadro installation width (EB), 3 different cabinet side panel thicknesses (KD) can be accommodated without changing the drawer dimensions. The following dimensions apply (mm): 23 18 21 19 20 Cabinet thickness (KD) 18 19 Quadro installation width (EB) 12,5 10,5 9,5 Dimension A 23 21 20 12,5 10,5 9,5 B ø5 x 13 384 K L C1 D 471,5 M A H C2 Wooden rear panel 3x ø3,5x12 144 100 Aluminium rear panel 2x 100 ø3,5x12 Size Wooden rear panel Aluminium rear panel A Bottom panel depth NL + 10 NL - 3 B Bottom panel width LB - 2 x EB - 51,5 LB - 2 x EB - 51,5 C1 Rear panel width K - 20 K - 20 C2 Rear panel width H - 20 H - 20 D Rear panel height 144 L Cut-out depth 280 267 M Hole distance 293 280 NL = nominal length/lb = inside cabinet width 9 44 10 Dimensions Order no. PU mm ø 3,5 x 12 0 045 7 200 ø 3,5 x 20 0 045 8 200 Double walled drawer system InnoTech 5.2.109

Double-walled steel drawer system InnoTech preassembled electrical appliance drawer Includes 2 wired socket outlets with child guard With pre-installed wiring Designed for standard cabinet widths Nominal length 470 mm The system is pre-mounted and comes with two wired socket outlets with child guard Must only be connected to a 230V/50 Hz/ A mains power supply The following components are all you need for assembling an InnoTech electrical appliance drawer: 34 Preassembled electrical pot-and-pan drawer + Front connectors with expanding dowel or to screw-on + Quadro drawer slides see page 5.2.65 Approved for use in: Germany, Sweden, Norway, Finland, Spain, Italy! 34 Preassembled electrical pot-and-pan drawer 34 Cabinet width Order no. PU mm 600 9 010 202 1 900 9 010 206 1 Front connectors White plastic Assembly Order no. PU A B A B With expanding dowel 0 077 911 1/40 Screw-on 0 077 910 1/40 Fixing with countersunk chipboard screw ø 3,5 mm A 3x ø10x12,5 min. 515 96 144 505 min. 227 4,5 12 9,5 min. 86 KD EB 32 min. 90,5 46 ø50 EB 41,5 55,5 32 80 5.2.110 Double walled drawer system InnoTech www.hettich.com

Double-walled steel drawer system InnoTech preassembled XXL drawer For additionally utilising storage space at plinth level With spill-proof plastic tub Create space for large and bulky items, from saucepans and buckets to bottle crates With plinth lifting mechanism for neat appearance and smooth running action without leaving scratches or marks Designed for standard cabinet widths Nominal length 470 mm The following components are all you need for assembling an InnoTech XXL drawer: 35 Preassembled XXL drawer + Front connectors with expanding dowel or to screw-on + Quadro drawer slides V6+ Silent System or V8 Silent System see pages 5.2.65 35 35 Preassembled XXL drawer Cabinet width Order no. PU mm 600 0 042 725 1 800 0 048 255 1 900 0 042 726 1 Front connectors White plastic Assembly Order no. PU A B A B With expanding dowel 0 077 911 1/40 Screw-on 0 077 910 1/40 Fixing with countersunk chipboard screw ø 3,5 mm Quadro V6+ Silent System = min. 485 Quadro V8 Silent System = min. 505 A 3x ø10x12,5 141 T (min. 47) min. 150 20 Nominal length 470 314 1 13 188 ø5x13 13 Cross member 141 4,5 min. T 47 98 - T 32 KDEB 96 32 14 600 = 417 800 = 614 900 = 714 6 25-85 min. 125 Leveller see group 8 600 = 567 800 = 767 900 = 867 Double walled drawer system InnoTech 5.2.111

Double-walled steel drawer system InnoTech for under-oven bottom drawer Height 54 mm Quick insertion and removal of the drawer No bottom panel machining Toolless assembly/disassembly and convenient front panel adjustment Cabinet width 600 mm or customised cabinet widths Nominal length 470 mm Perfect drawer action with Quadro partial or full extension; optionally with Silent System for closing quietly and gently adapted to the thickness of the cabinet sides with, 18 and 19 mm The following components are all you need for assembling an InnoTech under-oven drawer for cabinet width of 600 mm: 36 Preassembled drawer, height 54 mm + Front connectors with expanding dowel or to screw-on + Quadro drawer slides see page 5.2.65 36 Preassembled drawer, height 54 mm contains: 1 pcs drawer, powder-coated steel, silver, 3-sided, preassembled, complete with silver-grey drawer bottom panel 2 pcs cover caps with Hettich logo Order no. PU 0 077 941 1 Cover caps with customised imprint available on request 36 Drawer set, height 54 mm contains: 1 set drawer profiles, powder-coated steel 1 set back panel connectors, powder-coated steel 2 pcs cover caps with Hettich logo Pan-head screws ø 3,5 x 12 mm The following components are all you need for assembling a customised InnoTech under-oven drawer: Drawer set, height 54 mm + Front connectors with expanding dowel or to screw-on + Quadro drawer slides see page 5.2.65 + Bottom and rear panel, mm Nominal length Order no./ PU mm finish silver anthracite 470 9 079 029 9 079 037 1 set Cover caps with customised imprint available on request Front connectors White plastic Assembly Order no. PU A With expanding dowel 0 077 911 1/40 B Screw-on 0 077 910 1/40 A B Fixing with countersunk chipboard screw ø 3,5 mm 5.2.112 Double walled drawer system InnoTech www.hettich.com

Double walled steel drawer system InnoTech for variable drawer widths Height 54 mm Quadro V6 Silent System/ Quadro V6 Full-extension Load capacity 30 kg Quadro V6+ Silent System Full-extension Load capacity 50 kg Quadro V8 Silent System Full-extension Load capacity 70 kg Quadro 30 Part-extension Load capacity 30 kg Hole positions for Quadro/ minimum installation height For further details see page 5.2.66-5.2.70 81 36 ø4 ø6,3 12 9,5 54 ø4 ø6,3 12 87 9,5 42 54 ø4 ø6,3 92 12 9,5 47 12 54 ø4 ø6,3 54 78 9,5 33 ø3,5x12 ø3,5x12 ø3,5x12 ø3,5x12 Hole positions for front connectors 40,5 4,5 A 2x ø10x12,5 32 14 A 2x ø10x12,5 4,5 32 14 46,5 A 2x ø10x12,5 32 4,5 14 51,5 A 2x ø10x12,5 32 4,5 14 37,5 KD EB KD EB KD EB KD EB From a cabinet width of 800 mm, we recommend use of the Quadro V6+ or Quadro V8 By varying the Quadro installation width (EB), 3 different cabinet side panel thicknesses (KD) can be accommodated without changing the drawer dimensions. The following dimensions apply (mm): 23 18 21 19 20 Cabinet thickness (KD) 18 19 Quadro installation width (EB) 12,5 10,5 9,5 Dimension A 23 21 20 12,5 10,5 9,5 Dimensions LT Wooden rear panel NL C LB = inside cabinet width NL = nominal length LT = min. interior cabinet depth, depending on the Quadro used Size Wooden rear panel A Bottom panel depth NL + 10 B Bottom panel width LB - 2 x EB - 51,5 C Rear panel width LB - 2 x EB - 63 D Rear panel height 53 B LB A D 9 38 53 10 2x ø3,5x12 Dimensions Order no. PU mm ø 3,5 x 12 0 045 7 200 ø 3,5 x 20 0 045 8 200 Double walled drawer system InnoTech 5.2.113

XXL under-oven drawer For additionally utilising the space at plinth level below the oven With non-spill plastic tub and moveable storage tray Creates space for large and bulky items With plinth lifting mechanism for neat appearance and smooth running action without leaving scratches or marks For plinth heights from 100 mm Cabinet width 600 mm Nominal length 470 mm The following components are all you need for assembling a XXL under-oven drawer: 37 Preassembled XXL under-oven drawer + Quadro drawer slides see pages 5.2.65 37 XXL under-oven drawer contains: 1 plastic tub with storage tray 2 plinth lifting mechanisms 2 front connections 2 levelling feet right/left Plinth height min. Order no. PU mm 100 0 046 814 1 150 0 046 8 1 Mounting application 434 383 60 92,5 / 142,5 min. 499 4 1,5 T-10 3 20-70 Y T min. 81 14 4 KS 60 600 467 Y = drawer front overlay T = space required for plinth 26 10 10 26 ø4 92,5 / 142,5 32 9 256 32 37 9 443 14 26 10 32 320 32 23 ø4 ø6,3 = minimum number of screw-fixing positions Plinth hole pattern Drawer front hole pattern 448 32 384 517 490 426 Y min. 81 ø5 26,5 T - 10 32 26,5 32 41,5 ø4 ø6,3 5.2.114 Double walled drawer system InnoTech www.hettich.com

i Range summary Waste systems behind drawer fronts for InnoTech drawer system InnoTech Pull 9.1.68 InnoFlex 9.1.69-9.1.71 Bin.it Flex 9.1.72 top-running for InnoTech pull-out cabinets Quadro full-extension slide Dampened closure Silent System bottom-running for InnoTech pot-and-pan drawers Quadro full-extension slide Dampened closure Silent System for InnoTech pot-and-pan drawers Quadro full-extension slide Dampened closure Silent System InnoDeluxe 9.1.72 InnoTech Vario 9.1.73 bottom-running for InnoTech pot-and-pan drawers Quadro full-extension slide Dampened closure Silent System Stainless steel look for InnoTech pot-and-pan drawers Quadro full-extension slide Dampened closure Silent System Stainless steel look Double walled drawer system InnoTech 5.2.115

Technical information i Wooden rear panel assembly Steel/stainless-steel drawer Wooden rear panel assembly Beech drawer/pot-and-pan drawer ø3,5x12 Rear panel connector Steel/stainless-steel pot-and-pan drawer ø3,5x12 Rear panel connector Drawer installation ø3,5x12 Alternatively: Knock adapter claws into the base 5.2.1 Double walled drawer system InnoTech www.hettich.com

i Technical information InnoFit Pro For assembling InnoTech drawers and pot-and-pan drawers Quickly set using latch levers for - Drawer widths of 275 mm and 300 to 1200 mm in 50 mm increments - Drawer depths of 260, 300, 350, 420, 470, 520 and 620 mm - Rear panel heights of 70, 144 and 176 mm Also for customised drawer widths Sturdy aluminium frame Order no. PU 0 041 777 1 For further assembly machinery, see Group 2 Railing installation Steel/stainless steel Railing installation Beech ø3,5 Double walled drawer system InnoTech 5.2.117

Technical information i Quadro drawer slides assembly Fitting drawer Remove drawer 5.2.118 Double walled drawer system InnoTech www.hettich.com

i Technical information Installing front panel Removing front panel Toolless assembly Toolless disassembly Adjusting front panel Toolless height adjustment Side adjustment on right-hand drawer profile only ±2 mm ± 1,5 mm Tilt adjustment Double walled drawer system InnoTech 5.2.119

Technical information i Installing front panel Internal drawer Basic ø3,5x40 Removing front panel Internal drawer Exclusiv 4x M3,5 x 19 = = = ca. 100-150 LB - 2 x EB -101 ø4 ø3,5 x 12 5.2.120 Double walled drawer system InnoTech www.hettich.com

i Technical information Installing front panel Internal pot-and-pan drawer Basic ø3,5x40 Removing front panel Internal pot-and-pan drawer Exclusiv 2x M3,5 x 8 4x M3,5 x 19 = = = ca. 100-150 LB - 2 x EB -101 ø4 ø3,5 x 12 Double walled drawer system InnoTech 5.2.121

Technical information i Assembly of add-on set, 2nd railing level Assembly of add-on set, lengthwise railing ø3,5 5.2.122 Double walled drawer system InnoTech www.hettich.com

i Technical information Side stabilizer assembly ø 2,5 Drilling jig 40 22,5 EB 9,5=14,6 EB 10,5=14,6 EB 12,5=12,6 EB 9,5/10,5 = inside cabinet width - 2 x EB - 37 EB 12,5 = inside cabinet width - 2 x EB - 33 ø3,5x Anti-tilt assembly 26,4 ø5 20,6 12,5 Double walled drawer system InnoTech 5.2.123

5.2.124 www.hettich.com

i Range summary 5.3 Single-wall steel drawer system MultiTech MultiTech Drawer profile height 54 mm 5.3.4-5.3.5 MultiTech Drawer profile height 86 mm 5.3.6-5.3.7 MultiTech Drawer profile height 118 mm 5.3.8-5.3.9 MultiTech Drawer profile height 150 mm 5.3.10-5.3.11 MultiTech Drawer profile height 214 mm 5.3.12-5.3.13 MultiTech Railing set for pot-and-pan drawers/ Cabinet side view and hole positions 5.3.14-5.3.15 MultiTech Hanging file frame set/ Accessories for central lock 5.3. - 5.3.17 MultiTech Accessories 5.3.18-5.3.19 MultiTech Technical information/ Assembly aid MultiFit Pro 5.3.20-5.3.24 Single-wall steel drawer system MultiTech 5.3.1

Single-wall steel drawer system MultiTech Drawer profile Full range with drawer profile heights of 54, 86, 118, 150 and 214 mm, the variable drawer system ensures a large variety of uses. Depths ranging from 250 to 550 mm ensure perfect variability. Drawer runner Roller runner with partial or over-extension Load capacity: 25 kg with partial-extension 30 kg with over-extension With integrated self-closing effect and double stop With captive guide rail on one side and automatic tolerance compensation 5.3.2 Single-wall steel drawer system MultiTech www.hettich.com

Single-wall steel drawer system MultiTech Use storage space effectively MultiTech internal drawers enlarge the available storage space considerably Use the space under the built-in kitchen range effectively MultiTech with a drawer profile height of 54 mm Broad application spectrum The extensive arge range of accessories allows MultiTech system components to be used for a variety of purposes in the kitchen, office, living room or bedroom... Plenty of space for large or bulky items MultiTech with a drawer profile heigth of 214 mm Single-wall steel drawer system MultiTech 5.3.3

Single-wall steel drawer system MultiTech for variable drawer widths Drawer profile height 54 mm Single-wall steel drawer system with roller runner as partially extending system with self-closing function Load capacity 25 kg No bottom panel machining Quick insertion and removal of the drawer Simple assembly and front panel adjustment One-sided constrained guidance, automatic tolerance compensation ±1 mm Integrated double stop The following components are all you need for assembling a MultiTech drawer: Drawer set, height 54 mm + Front connectors + Bottom and rear panel, mm Drawer set, height 54 mm contains: 1 set drawer profiles, powder-coated steel 1 set cabinet rails (part-extension), powder-coated steel Nominal length Order no. PU mm white grey 250 0 050 001 0 050 002 1/10 sets 275 0 051 404 0 051 405 1/10 sets 350 0 050 003 0 050 004 1/10 sets 400 0 050 005 0 050 006 1/10 sets 450 0 050 007 0 050 008 1/10 sets 500 0 050 009 0 050 010 1/10 sets 550 0 050 011 0 050 012 1/10 sets Front connectors Nickel-plated zinc die-cast A B Assembly Order no. PU A Press-in 0 079 173 1/10 sets B Screw on 0 079 174 1/10 sets Technical information see page 5.3.20 5.3.4 Single-wall steel drawer system MultiTech www.hettich.com

Single-wall steel drawer system MultiTech for variable drawer widths Drawer profile height 54 mm Hole position Roller runner/minimum installation height Part-extension For further details see page 5.3.15 ø3,5 ø6,3 min. 24 Fixing screws Dimensions mm Order no. PU 78 49 min. 5 39 ø 6,3 x 10,5 0 051 264 200 ø 6,3 x 14 0 051 265 200 ø 3,5 x 12 9 079 791 200 ø 3,5 x 0 071 925 200 ø 4,0 x 12 0 058 243 200 ø4x12 Hole position Front connectors Hole position Rear panel Drawer ø2,5 ø10x12,5 9 2x ø4x12 32 12 18,5 8,5 8,5 Dimensions LT NL C LB = inside cabinet width NL = nominal length NH = nominal height, 54 mm Size Drawer A Shelf depth NL - 3 NH D B Shelf width LB - 32 C Rear panel width LB - 32 B A D Rear panel height 39 LT Inside cabinet depth min. NL + 5 LB Processing technology see group 2 Single-wall steel drawer system MultiTech 5.3.5

Single-wall steel drawer system MultiTech for variable drawer/internal drawer widths Drawer profile height 86 mm Single-wall steel drawer system with roller runner as part-extension or over-extension with self-closing effect Load capacity 25 kg (part-extension) 30 kg (over-extension) No bottom panel machining Quick insertion and removal of the drawer/internal drawer Simple assembly and front panel adjustment One-sided constrained guidance, automatic tolerance compensation ±1 mm Integrated double stop The following components are all you need for assembling a MultiTech drawer/internal drawer: Drawer set, height 86 mm contains: 1 set drawer profiles, powder-coated steel 1 set cabinet rails (part-extension), powder-coated steel Drawer set, height 86 mm + Front connectors + Bottom and rear panel, mm Optional: Cover cap Front connector for internal drawer Additional set for over-extension Nominal length Order no. PU mm white grey 250 0 050 013 0 050 014 1/10 sets 275 0 051 406 0 051 407 1/10 sets 350 0 050 015 0 050 0 1/10 sets 400 0 050 017 0 050 018 1/10 sets 450 0 050 019 0 050 020 1/10 sets 500 0 050 021 0 050 022 1/10 sets 550 0 050 023 0 050 024 1/10 sets Front connectors Nickel-plated steel A B C Assembly Order no. PU A Press-in 0 054 998 1/20 B Screw on 0 054 997 1/20 C With expanding sockets 0 051 477 1/20 Cover cap Plastic Finish Order no. PU white 0 046 096 1/20 grey 0 046 097 1/20 Cover caps with customised imprint available on request Front connector for internal drawer Plastic Finish Order no. PU white 0 051 487 1/10 sets grey 0 051 488 1/10 sets Technical information see page 5.3.20 Additional set for over-extension contains: 1 set cabinet rails, powder-coated steel (the cabinet rails from the drawer kit must not be used!) 1 set centre profile, powder-coated steel 1 set safety catch, plastic Nominal length Order no. PU mm white grey 350 0 051 478 0 051 479 1/10 sets 400 0 051 409 0 051 410 1/10 sets 450 0 051 411 0 051 412 1/10 sets 500 0 051 413 0 051 414 1/10 sets 550 0 051 415 0 051 4 1/10 sets 5.3.6 Single-wall steel drawer system MultiTech www.hettich.com

Single-wall steel drawer system MultiTech for variable drawer/internal drawer widths Drawer profile height 86 mm Hole position Roller runner/minimum installation height Part-extension Over-extension For further details see page 5.3.15 ø3,5 ø6,3 ø3,5 ø6,3 min. 24 min. 56 Fixing screws 110 81 min. 5 71 110 49 min. 5 71 Dimensions mm Order no. PU ø 6,3 x 10,5 0 051 264 200 ø 6,3 x 14 0 051 265 200 ø 3,5 x 12 9 079 791 200 ø 3,5 x 0 071 925 200 ø4x12 ø4x12 ø 4,0 x 12 0 058 243 200 Hole position Front connectors Hole position Rear panel Drawer Internal drawer ø2,5 ø10x12,5 9 9 2x ø4x12 64 2x ø3,5x12 18 71 32 34,5 18,5 8,5 8,5 Dimensions LT NL C LB = inside cabinet width NL = nominal length NH = nominal height, 86 mm Size Drawer Internal drawer A Shelf depth NL - 3 NL - 19 E NH D B Shelf width LB - 32 LB - 32 C Rear panel width LB - 32 LB - 32 F B A D Rear panel height 71 71 E Front panel - LB - 58 LB F Front height - 71 LT Inside cabinet depth min. NL + 5 min. NL + 14 Processing technology see group 2 Single-wall steel drawer system MultiTech 5.3.7

Single-wall steel drawer system MultiTech for variable drawer/internal drawer widths Drawer profile height 118 mm Single-wall steel drawer system with roller runner as part-extension or over-extension with self-closing effect Load capacity 25 kg (part-extension) 30 kg (over-extension) No bottom panel machining Quick insertion and removal of the drawer/internal drawer Simple assembly and front panel adjustment One-sided constrained guidance, automatic tolerance compensation ±1 mm Integrated double stop The following components are all you need for assembling a MultiTech drawer/internal drawer: Drawer set, height 118 mm contains: 1 set drawer profiles, powder-coated steel 1 set cabinet rails (part-extension), powder-coated steel Drawer set, height 118 mm + Front connectors + Bottom and rear panel, mm Optional: Cover cap Front connector for internal drawer Additional set for over-extension Nominal length Order no. PU mm white grey 250 0 050 033 0 050 034 1/10 sets 275 0 051 417 0 051 418 1/10 sets 350 0 050 035 0 050 036 1/10 sets 400 0 050 037 0 050 038 1/10 sets 450 0 050 039 0 050 040 1/10 sets 500 0 050 041 0 050 042 1/10 sets 550 0 050 043 0 050 044 1/10 sets Front connectors Nickel-plated steel A B C Assembly Order no. PU A Press-in 0 054 998 1/20 B Screw on 0 054 997 1/20 C With expanding sockets 0 051 477 1/20 Cover cap Plastic Finish Order no. PU white 0 046 096 1/20 grey 0 046 097 1/20 Cover caps with customised imprint available on request Front connector for internal drawer Plastic Finish Order no. PU white 0 051 489 1/10 sets grey 0 051 490 1/10 sets Technical information see page 5.3.20 Additional set for over-extension contains: 1 set cabinet rails, powder-coated steel (the cabinet rails from the drawer kit must not be used!) 1 set centre profile, powder-coated steel 1 set safety catch, plastic Nominal length Order no. PU mm white grey 350 0 051 478 0 051 479 1/10 sets 400 0 051 409 0 051 410 1/10 sets 450 0 051 411 0 051 412 1/10 sets 500 0 051 413 0 051 414 1/10 sets 550 0 051 415 0 051 4 1/10 sets 5.3.8 Single-wall steel drawer system MultiTech www.hettich.com

Single-wall steel drawer system MultiTech for variable drawer/internal drawer widths Drawer profile height 118 mm Hole position Roller runner/minimum installation height Part-extension ø3,5 ø6,3 Over-extension ø3,5 ø6,3 For further details see page 5.3.15 min. 24 min. 56 142 113 min. 5 ø4x12 103 142 81 min. 5 ø4x12 103 Fixing screws Dimensions mm Order no. PU ø 6,3 x 10,5 0 051 264 200 ø 6,3 x 14 0 051 265 200 ø 3,5 x 12 9 079 791 200 ø 3,5 x 0 071 925 200 ø 4,0 x 12 0 058 243 200 Hole position Front connectors Hole position Rear panel Drawer Internal drawer ø2,5 ø10x12,5 9 64 2x ø3,5x12 9 48 103 64 2x ø4x12 40,5 34,5 18,5 8,5 Dimensions E NH F B LB LT NL A C D LB = inside cabinet width NL = nominal length NH = nominal height, 118 mm Size Drawer Internal drawer A Shelf depth NL - 3 NL - 19 B Shelf width LB - 32 LB - 32 C Rear panel width LB - 32 LB - 32 D Rear panel height 103 103 E Front panel - LB - 58 F Front height - 103 LT Inside cabinet depth min. NL + 5 min. NL + 14 Processing technology see group 2 Single-wall steel drawer system MultiTech 5.3.9

Single-wall steel drawer system MultiTech for variable drawer/internal drawer widths Drawer profile height 150 mm Single-wall steel drawer system with roller runner as part-extension or over-extension with self-closing effect Load capacity 25 kg (part-extension) 30 kg (over-extension) No bottom panel machining Quick insertion and removal of the drawer/internal drawer Simple assembly and front panel adjustment One-sided constrained guidance, automatic tolerance compensation ±1 mm Integrated double stop The following components are all you need for assembling a MultiTech drawer/internal drawer: Drawer set, height 150 mm contains: 1 set drawer profiles, powder-coated steel 1 set cabinet rails (part-extension), powder-coated steel Drawer set, height 150 mm + Front connectors + Bottom and rear panel, mm Optional: Cover cap Front connector for internal drawer Additional set for over-extension Nominal length Order no. PU mm white grey 250 0 050 053 0 050 054 1/10 sets 275 0 051 419 0 051 420 1/10 sets 350 0 050 055 0 050 056 1/10 sets 400 0 050 057 0 050 058 1/10 sets 450 0 050 059 0 050 060 1/10 sets 500 0 050 061 0 050 062 1/10 sets 550 0 050 063 0 050 064 1/10 sets Front connectors Nickel-plated steel A B C Assembly Order no. PU A Press-in 0 054 998 1/20 B Screw on 0 054 997 1/20 C With expanding sockets 0 051 477 1/20 Cover cap Plastic Finish Order no. PU white 0 046 096 1/20 grey 0 046 097 1/20 Cover caps with customised imprint available on request Front connector for internal drawer Plastic Finish Order no. PU white 0 051 491 1/10 sets grey 0 051 492 1/10 sets Technical information see page 5.3.20 Additional set for over-extension contains: 1 set cabinet rails, powder-coated steel (The cabinet rails from the drawer kit must not be used!) 1 set centre profile, powder-coated steel 1 set safety catch, plastic Nominal length Order no. PU mm white grey 350 0 051 478 0 051 479 1/10 sets 400 0 051 409 0 051 410 1/10 sets 450 0 051 411 0 051 412 1/10 sets 500 0 051 413 0 051 414 1/10 sets 550 0 051 415 0 051 4 1/10 sets 5.3.10 Single-wall steel drawer system MultiTech www.hettich.com

Single-wall steel drawer system MultiTech for variable drawer/internal drawer widths Drawer profile height 150 mm Hole position Roller runner/minimum installation height Part-extension Over-extension ø3,5 ø6,3 ø3,5 ø6,3 For further details see page 5.3.15 min. 24 min. 56 174 145 135 174 135 Fixing screws min. 5 ø4x12 113 min. 5 ø4x12 Dimensions mm Order no. PU ø 6,3 x 10,5 0 051 264 200 ø 6,3 x 14 0 051 265 200 ø 3,5 x 12 9 079 791 200 ø 3,5 x 0 071 925 200 ø 4,0 x 12 0 058 243 200 Hole position Front connectors Drawer Internal drawer Hole position Rear panel ø2,5 ø10x12,5 9 9 2x ø4x12 64 2x ø3,5x12 64 135 96 72,5 52,5 18,5 8,5 Dimensions Processing technology see group 2 E NH F LT NL B LB A C D LB = inside cabinet width NL = nominal length NH = nominal height, 150 mm Size Drawer Internal drawer A Shelf depth NL - 3 NL - 19 B Shelf width LB - 32 LB - 32 C Rear panel width LB - 32 LB - 32 D Rear panel height 135 135 E Front panel - LB - 58 F Front height - 135 LT Inside cabinet depth min. NL + 5 min. NL + 14 Single-wall steel drawer system MultiTech 5.3.11

Single-wall steel drawer system MultiTech for variable drawer widths Drawer profile height 214 mm Single-wall steel drawer system with roller runner as part-extension or over-extension with self-closing effect Load capacity 25 kg (part-extension) 30 kg (over-extension) No bottom panel machining Quick insertion and removal of the drawer Simple assembly and front panel adjustment One-sided constrained guidance, automatic tolerance compensation ±1 mm Integrated double stop The following components are all you need for assembling a MultiTech drawer: Drawer set, height 214 mm + Front connectors + Bottom and rear panel, mm Optional: Cover cap Additional set for over-extension Drawer set, height 214 mm contains: 1 set drawer profiles, powder-coated steel 1 set cabinet rails (part-extension), powder-coated steel Nominal length Order no. PU mm white grey 350 0 051 457 0 051 458 1/5 sets 400 0 051 449 0 051 450 1/5 sets 450 0 051 451 0 051 452 1/5 sets 500 0 051 453 0 051 454 1/5 sets 550 0 051 455 0 051 456 1/5 sets Front connectors Nickel-plated steel A B C Assembly Order no. PU A Press-in 0 054 998 1/20 B Screw on 0 054 997 1/20 C With expanding sockets 0 051 477 1/20 Cover cap Plastic Additional set for over-extension contains: 1 set cabinet rails, powder-coated steel (The cabinet rails from the drawer kit must not be used!) 1 set centre profile, powder-coated steel 1 set safety catch, plastic Finish Order no. PU white 0 046 096 1/20 grey 0 046 097 1/20 Cover caps with customised imprint available on request Technical information see page 5.3.20 Nominal length Order no. PU mm white grey 350 0 051 478 0 051 479 1/10 sets 400 0 051 409 0 051 410 1/10 sets 450 0 051 411 0 051 412 1/10 sets 500 0 051 413 0 051 414 1/10 sets 550 0 051 415 0 051 4 1/10 sets 5.3.12 Single-wall steel drawer system MultiTech www.hettich.com

Single-wall steel drawer system MultiTech for variable drawer widths Drawer profile height 214 mm Hole position Roller runner/minimum installation height Part-extension Over-extension For further details see page 5.3.15 ø3,5 ø6,3 ø3,5 ø6,3 min. 24 min. 56 238 209 199 238 199 177 Fixing screws Dimensions mm Order no. PU ø 6,3 x 10,5 0 051 264 200 ø 6,3 x 14 0 051 265 200 min. 5 min. 5 ø 3,5 x 12 9 079 791 200 ø 3,5 x 0 071 925 200 ø 4,0 x 12 0 058 243 200 ø4x12 ø4x12 Hole position Front connectors Drawer Hole position Rear panel Dimensions LB = inside cabinet width NL = nominal length NH = nominal height, 214 mm LT NL ø2,5 ø10x12 9 C 3x ø4x12 64 64 NH D 64 B A 136,5 96 LB ø 2,5 8,5 Processing technology see group 2 18,5 Size Drawer A Shelf depth NL - 3 B Shelf width LB - 32 C Rear panel width LB - 32 D Rear panel height 199 LT Inside cabinet depth min. NL + 5 Single-wall steel drawer system MultiTech 5.3.13

Single-wall steel drawer system MultiTech for front pull-outs Railing set MultiTech drawer sets with drawer profile widths of 86, 118 and 150 mm can be combined with the railing set to create pot-and-pan drawers For drawer lengths 350, 400, 450, 500 and 550 mm Load capacity 25 kg (part-extension) 30 kg (over-extension) The following components are all you need for assembling a MultiTech pot-and-pan drawer: Drawer set (see page 5.3.6-5.3.11) + Front connectors (see page 5.3.6-5.3.11) + Railing set + Bottom and rear panel, mm Optional: Cover cap (see page 5.3.6-5.3.11) Additional set for over-extension (see page 5.3.6-5.3.11) Crosswise railing Mount for crosswise railing Railing set contains: 2 railing tubes, powder-coated steel 2 drawer front connections with expanding socket for railing bar Nominal length Order no. PU mm white grey 350 0 051 421 0 051 422 1/10 sets 400 0 051 426 0 051 427 1/10 sets 450 0 051 481 0 051 482 1/10 sets 500 0 051 483 0 051 484 1/10 sets 550 0 051 485 0 051 486 1/10 sets Crosswise railing Custom length Length 1100 mm Powder-coated steel Crosswise railing length = inside cabinet width - 38 Hole position Front connectors ø10x12,5 6,5 Hole position Rear panel 9 2x 12,5 ø3,5x12 32 ø2,5 ø10x12,5 Y 2x ø4x12 RW 64 Z Order no. PU white grey 9 081 054 9 081 055 1/5 Mount for crosswise railing Plastic Order no. PU white grey 9 078 355 9 078 356 1/40 Technical information see page 5.3.20 8,5 X Drawer profile Size Size Size Size height mm RW mm X mm Y mm Z mm 86 min. 125 8,5 Rear panel height + 32 118 min. 157 40,5 bottom panel 64 thickness - 6,5 150 min. 189 72,5 96 18,5 5.3.14 Single-wall steel drawer system MultiTech www.hettich.com

Single-wall steel drawer system MultiTech Cabinet side view and hole positions Part-extension Cabinet front edge Drawer Cabinet front edge! ø3,5 ø6,3 Nominal length 37 9 Internal drawer Cabinet front edge 37 EL 37 128 b1 b2 b3 Min. cabinet depth = minimum number of screw-fixing positions!! Nominal length Hole spacing mm Extension loss Min. cabinet depth mm mm b1 b2 b3 EL mm drawer internal drawer 250 64 - - 85 255 264 275 96 - - 85 280 289 350 96 64-85 355 364 400 96 96 32 85 405 414 450 96 128 32 95 455 464 500 96 128 64 100 505 514 550 96 128 128 110 555 564 Over-extension Drawer Cabinet front edge! Cabinet front edge ø3,5 ø6,3 Nominal length 37 Internal drawer Cabinet front edge 9 15 37 128 96 b1 b2 Min. cabinet depth = minimum number of screw-fixing positions 37! Nominal length Hole spacing mm Min. cabinet depth mm mm b1 b2 drawer internal drawer 350 64-355 364 400 96-405 414 450 128 32 455 464 500 128 96 505 514 550 128 128 555 564 Processing technology see group 2 Single-wall steel drawer system MultiTech 5.3.15

Single-wall steel drawer system MultiTech Hanging file frame set/accessories for central lock MultiTech drawer sets with frame heights of 86, 118 and 150 mm can be used with the file frame set for office applications. For drawer lengths 400, 450, 500 and 550 mm Load capacity 25 kg (part-extension) 30 kg (over-extension) The following components are all you need for assembling a MultiTech drawer with hanging file frame: Drawer set (see page 5.3.6-5.3.11) + Front connectors (see page 5.3.6-5.3.11) + Hanging file frame set + Bottom and rear panel, mm Optional: Cover cap (see page 5.3.6-5.3.11) Additional set for over-extension (see page 5.3.6-5.3.11) Locking stop for central locking Locking device for central lock with anti-tilt blokking function Locking bar Cylinder cam lock including rosette Hanging file frame set contains: 2 file frame profiles, nickel-plated steel 4 adapters for file frame profiles, left/right Nominal length Order no. PU mm 400 0 051 495 1 set 450 0 051 497 1 set 500 0 051 499 1 set 550 0 051 501 1 set Accessories for central lock Locking stop Locking device Order no. PU 0 051 496 1/10 Order no. PU 0 051 498 1/10 Locking bar With five adjustable pins Cylinder cam lock including rosette Barrel Z23 see group 7.2 Order no. PU 0 051 500 1 Order no. PU 0 013 337 1 Technical information see page 5.3.20 5.3. Single-wall steel drawer system MultiTech www.hettich.com

Single-wall steel drawer system MultiTech Hanging file frame set/accessories for central lock Hole position for adapter Front Rear panel 2x ø3,5x,5 ø4 9,5 32 56,2 L 32 R 26 32,5 14,2 9,5 2x ø3,5x H K 21 L M 8,5 H = rear panel height + panel thickness - 9,5 min. K = L - 2 x,5 + 2 x 26 K + 32 Central lock 37 Lock 29 87 32 18,5 18,5 ø19 20 1000 19 ø7 G 20 10 7 Height Size G mm mm Part-extension Over-extension 86 76,5 44,5 118 108,5 76,5 150 140,5 108,5 Processing technology see group 2 Single-wall steel drawer system MultiTech 5.3.17

Single-wall steel drawer system MultiTech Accessories Cutlery tray Universal application for nominal lengths 450 and 500 mm Cutlery tray depth 433-483 mm White plastic, high-gloss laminate For cabinet width Order no. PU mm 300 0 044 924 1/10 350 0 044 923 1/10 400 0 044 922 1/10 450 0 044 921 1/10 500 0 044 919 1/10 600 0 044 918 1/10 The wide rim can be trimmed to fit drawer size. Use a circular saw and calculate tray size using the following formulae Trim sizes for cutlery tray Trimmed width = inside cabinet width - 32 mm Trimmed depth = nominal length - 17 mm (for rear panel mm) 81 Cutlery tray 50 ±1 Possible trim sizes Cutlery tray depth 433-483 mm Cutlery tray Width 200-240 250-290 300-340 350-390 400-440 500-540 For cabinet width 300 350 400 450 500 600 5.3.18 Single-wall steel drawer system MultiTech www.hettich.com

Single-wall steel drawer system MultiTech Accessories Spacers/distance rail for side clearance For drawers positioned behind doors The spacers/distance rail bridge the door/hinge protrusion For larger clearances several spacers can be clipped together White plastic Article Distance Order no. PU mm Spacers 3 0 033 681 1/100 4 0 033 682 1/100 5 0 033 683 1/100 Distance rail 25 0 013 952 1 485 25 50 Stop attachment For 5 mm hole diameter Transparent plastic ø8 Order no. PU 9 079 298 1/1000 1,5 5,5 ø5 Stop attachment For 6 mm hole diameter Plastic 1,5 ø8 7 ø6 Finish Order no. PU white 0 025 048 1/1000 brown 0 021 154 1/1000 beige 0 047 353 1/1000 Stop attachment ø 8 mm, self-adhesive Transparent plastic Order no. PU 0 072 120 50 0 046 695 1000 Single-wall steel drawer system MultiTech 5.3.19

Single-wall steel drawer system MultiTech Technical information/assembly aid MultiFit Pro i Drawer installation 4x ø4x12 4x ø4x12 Assembly aid for MultiTech drawers MultiFit Pro For assembling MultiTech drawers and pot-and-pan drawers Quickly set using latch levers for - Drawer widths of 275 mm and 300 to 900 mm in 50 mm increments - Drawer depths of 250, 275, 350, 400, 500 and 550 mm - Rear-panel heights of 86, 118, 150 and 214 mm Also for customised drawer widths Sturdy aluminium frame For further details see page 2.3.6-2.3.7 Order no. PU 9 079 392 1 Mounting the cabinet rails/engaging the drawer Part-extension Processing technology see group 2 5.3.20 Single-wall steel drawer system MultiTech www.hettich.com

i Single-wall steel drawer system MultiTech Technical information Over-extension Assembly of the front connectors... press-in... screw on... with expanding sockets ø10x12,5 4x ø10x12,5 ø3,5 Processing technology see group 2 Single-wall steel drawer system MultiTech 5.3.21

Single-wall steel drawer system MultiTech Technical information i Assembly of the front panels Drawer click Pot-and-pan drawer 4x ø3,5 click Internal drawer click 4x ø3,5 click Front panel removal 45 Article Order no. PU Disassembly tool 9 080 310 1 Front adjustment Height adjustment Side adjustment Tilt adjustment ± 1,5 m ± 2 mm Processing technology see group 2 5.3.22 Single-wall steel drawer system MultiTech www.hettich.com

i Single-wall steel drawer system MultiTech Technical information Hanging file frames click Locking device/locking stop 2x ø4,5x Processing technology see group 2 Single-wall steel drawer system MultiTech 5.3.23

Single-wall steel drawer system MultiTech Technical information i Locking bar Extension is stopped by the first notch The integrated double stop, second notch, engages the extension in the front position Processing technology see group 2 5.3.24 Single-wall steel drawer system MultiTech www.hettich.com

i Range summary 5.4 Partial and full-extension runners for wooden drawers Drawer slides Quadro Range summary/technical comparison 5.4.2-5.4.3 Ball bearing slides Range summary/technical comparison 5.4.32-5.4.33 Roller runners Range summary/technical comparison 5.4.48 Partial and full-extension runners for wooden drawers 5.4.1

Range summary/technical comparison Drawer slides Quadro i Quadro for wooden drawers with grooved frame and pull-out shelves, slide-on application Quadro V6 Silent System Quadro 30 Silent System Quadro V6 Page number 5.4.4-5.4.5 5.4.6-5.4.7 5.4.8-5.4.9 Brief description Full-extension with Partial-extension with Full-extension with integrated dampened closure integrated dampened closure integrated self-closing effect Load capacity 30 kg 30 kg 30 kg For drawer lengths 280-600 mm 250-550 mm 280-600 mm Assembly to the cabinet side to the cabinet side to the cabinet side Quadro for wooden drawers with rebated frame, slide-on application Quadro V6+ Silent System Quadro V6 Silent System Page number 5.4. - 5.4.17 5.4.18-5.4.19 Brief description Full-extension with integrated dampened closure Full-extension with integrated dampened closure Load capacity 50 kg 30 kg For drawer lengths 300-620 mm 260-520 mm Assembly to the cabinet side to the cabinet side Quadro for wooden drawers and pull-out shelves, plug-on assembly Quadro 25 Silent System Quadro 25 Quadro 40 Page number 5.4.20-5.4.21 5.4.22-5.4.23 5.4.24-5.4.25 Brief description Partial-extension with Partial-extension with Over-extension integrated dampened closure integrated self-closing effect Load capacity 25 kg 25 kg 40 kg For drawer lengths 250-550 mm 250-700 mm 280-700 mm Assembly to the cabinet side to the cabinet side to the cabinet side 5.4.2 Range summary of drawer slides Quadro www.hettich.com

i Range summary/technical comparison Drawer slides Quadro Quadro 30 5.4.10-5.4.11 Catches 5.4.12-5.4.13 Variario 5.4.14-5.4.15 Partial-extension with integrated self-closing effect 30 kg 250-650 mm to the cabinet side Catches for wooden drawers/ pull-out shelves Solid wood drawer insert 500 mm Quadro V6 BM Silent System 5.4.26-5.4.27 Quadro 40 BM 5.4.28-5.4.29 P 2 O (Push-To-Open) 5.4.30 Push-To-Open Accessories Stop attachment/ bracket/ front panel fitting 5.4.30-5.4.31 Full-extension with Part-extension Drawer opening system integrated dampened closure 30 kg 40 kg for Quadro drawer slides with integrated self-closing function 350-500 mm 270-680 mm on cabinet base on cabinet base Range summary of drawer slides Quadro 5.4.3

Full-extension for wooden drawers with grooved frame Quadro V6 Silent System Load capacity 30 kg Slide-on assembly simply place the drawer on the slides and push home Silent System the integrated dampened closure mechanism lets drawers close gently and quietly The integrated roll-out prevention stops accidental opening Perfect vertical and lateral stability. The robust, resilient tracks ensure optimal slide action through precison-guided steel balls. Maintenance-free through self-cleaning ball tracks Flexibility through interchangeability swap between Quadro partial and fullextension slides without changing cabinet, drawer or front panel dimensions! Nominal length/drawer length Hole spacing Min. cabinet depth Order no. mm b1 mm mm PU 1 set PU 10 sets 280 0 293 0 045 284 9 080 224 300 192 313 0 045 285 9 080 225 320 192 333 0 045 286 9 080 226 350 192 363 0 045 287 9 080 231 380 224 393 0 045 288 9 080 232 400 224 413 0 045 289 9 080 233 420 224 433 0 045 290 9 080 234 450 256 463 0 045 291 9 080 235 480 256 493 0 045 292 9 080 236 500 288 513 0 045 293 9 080 237 520 288 533 0 045 294 9 080 238 550 288 563 0 045 295 9 080 239 580 352 593 0 045 296 9 080 240 600 352 613 0 045 297 9 080 241 Catch for wooden drawers For safely connecting the Quadro extension and wooden drawer without the aid of tools (slide-on assembly) Infinite height adjustment up to + 2 mm via a knurled wheel (toolless) The set height is retained when the drawer is dismantled Details see page 5.4.12 Black plastic Article Order no. PU Catch left 0 075 806 100 Catch right 0 075 807 100 Set left/right 9 058 303 1/5 sets Pull-out combination system for front and inside drawer see group 9.1 Catch for pull-out shelves/wooden drawers with flush bottom see page 5.4.13 Solid wood drawer insert Variario see page 5.4.14-5.4.15 Processing technology see group 2 5.4.4 Drawer slides Quadro www.hettich.com

Full-extension for wooden drawers with grooved frame Quadro V6 Silent System Load capacity 30 kg ø4 ø6,3 max. 7 ø6 12 9,5 11 36 12-15 26,5 EB 20 26 Dimensions mm Order no. PU 6,3 x 10,5 0 051 264 200 6,3 x 14 0 051 265 200 4,0 x 0 010 085 200 10 ø6 11 Cabinet front edge Nominal length ø4 ø6,3 9 32 9 32 12 36 37 b1 Min. cabinet depth = minimum number of screw-fixing positions Assembly Disassembly Drawer slides Quadro 5.4.5

Partial-extension for wooden drawers with grooved frame Quadro 30 Silent System Load capacity 30 kg Slide-on assembly simply place the drawer on the slides and push home Silent System the integrated dampened closure mechanism lets drawers close gently and quietly The integrated roll-out prevention stops accidental opening. Perfect vertical and lateral stability. The robust, resilient tracks ensure optimal slide action through precison-guided steel balls. Maintenance-free through self-cleaning ball tracks Flexibility through interchangeability swap between Quadro partial and fullextension slides without changing cabinet, drawer or front panel dimensions! Nominal length/slide length Hole spacing Min. cabinet depth Extension loss Order no. mm b1 mm mm EL mm PU 1 set PU 12 sets 250 0 263 50 0 047 812 1 909 800 280 0 293 50 0 047 831 1 909 802 300 0 313 50 0 047 432 1 909 804 320 192 333 62 0 047 426 1 909 806 350 192 363 62 0 047 425 1 909 808 380 224 393 62 0 047 424 1 909 823 400 224 413 74 0 047 433 1 909 825 420 224 433 74 0 047 832 1 909 827 450 256 463 86 0 047 431 1 909 829 480 256 493 86 0 047 833 1 909 831 500 288 513 98 0 047 429 1 909 833 520 288 533 98 0 047 834 1 909 835 550 320 563 98 0 047 835 1 909 837 Coupling for wooden drawers For safely connecting the Quadro extension and wooden drawer without the aid of tools (slide-on assembly) Infinite height adjustment up to + 2 mm via a knurled wheel (toolless) The set height is retained when the drawer is dismantled Details see page 5.4.12 Black plastic Article Order no. PU Catch left 0 075 806 100 Catch right 0 075 807 100 Set left/right 9 058 303 1/5 sets Pull-out combination system for front and inside drawer see group 9.1 Catch for pull-out shelves/wooden drawers with flush bottom see page 5.4.13 Solid wood drawer insert Variario see page 5.4.14-5.4.15 Processing technology see group 2 5.4.6 Drawer slides Quadro www.hettich.com

Partial-extension for wooden drawers with grooved frame Quadro 30 Silent System Load capacity 30 kg ø4 ø6,3 max. 7 ø6 12 9,5 11 34 12-15 24,5 EB 20 25 Dimensions mm Order no. PU 6,3 x 10,5 0 051 264 200 6,3 x 14 0 051 265 200 4,0 x 0 010 085 200 Cabinet front edge 10 ø6 11 Nominal length ø4 ø6,3 9 32 9 32 12 34 EL 37 b1 Min. cabinet depth = minimum number of screw-fixing positions Assembly Disassembly Drawer slides Quadro 5.4.7

Full-extension for wooden drawers with grooved frame Quadro V6 Load capacity 30 kg Stop Control Slide-on assembly simply place the drawer on the slides and push home Stop Control the integrated self-closing mechanism closes drawers reliably and automatically and prevents them opening inadvertently Perfect vertical and lateral stability. The robust, resilient tracks ensure optimal slide action through precison-guided steel balls. Maintenance-free through self-cleaning ball tracks Flexibility through interchangeability swap between Quadro partial and fullextension slides without changing cabinet, drawer or front panel dimensions! Nominal length/slide length Hole spacing Min. cabinet depth Order no. mm b1 mm mm PU 1 set PU 15 sets 280 0 293 0 072 4 9 080 246 300 192 313 0 072 172 9 080 247 320 192 333 0 072 5 9 080 248 350 192 363 0 072 173 9 080 249 380 224 393 0 072 6 9 080 250 400 224 413 0 072 174 9 080 251 420 224 433 0 072 7 9 080 252 450 256 463 0 072 175 9 080 253 480 256 493 0 072 8 9 080 254 500 288 513 0 072 176 9 080 255 520 288 533 0 072 9 9 080 256 550 288 563 0 072 177 9 080 257 580 352 593 0 072 170 9 080 258 600 352 613 0 072 178 9 080 259 Catch for wooden drawers For safely connecting the Quadro extension and wooden drawer without the aid of tools (slide-on assembly) Infinite height adjustment up to + 2 mm via a knurled wheel (toolless) The set height is retained when the drawer is dismantled Details see page 5.4.12 Black plastic Article Order no. PU Catch left 0 075 806 100 Catch right 0 075 807 100 Set left/right 9 058 303 1/5 sets Pull-out combination system for front and inside drawer see group 9.1 Catch for pull-out shelves/wooden drawers with flush bottom see page 5.4.13 Solid wood drawer insert Variario see page 5.4.14-5.4.15 Processing technology see group 2 5.4.8 Drawer slides Quadro www.hettich.com

Full-extension for wooden drawers with grooved frame Quadro V6 Load capacity 30 kg ø4 ø6,3 max. 7 ø6 12 9,5 11 36 12-15 26,5 EB 20 Dimensions mm Order no. PU 6,3 x 10,5 0 051 264 200 6,3 x 14 0 051 265 200 4,0 x 0 010 085 200 Cabinet front edge Nominal length ø4 ø6,3 10 ø6 11 9 32 9 32 12 36 37 b1 Min. cabinet depth = minimum number of screw-fixing positions Assembly Disassembly Drawer slides Quadro 5.4.9

Partial-extension for wooden drawers with grooved frame Quadro 30 Load capacity 30 kg Stop Control Slide-on assembly simply place the drawer on the slides and push home Stop Control the integrated self-closing mechanism closes drawers reliably and automatically and prevents them opening inadvertently Perfect vertical and lateral stability. The robust, resilient tracks ensure optimal slide action through precison-guided steel balls. Maintenance-free through self-cleaning ball tracks Flexibility through interchangeability swap between Quadro partial and fullextension slides without changing cabinet, drawer or front panel dimensions! Nominal length/ Hole spacing Min. cabinet Extension Order no. PU Order no. PU slide b1 mm depth mm loss EL mm length mm 250 0 263 50 0 072 904 1 set 9 080 260 28 sets 280 0 293 50 0 048 901 1 set 9 080 261 19 sets 300 0 313 50 0 072 905 1 set 9 080 262 19 sets 320 192 333 62 0 048 902 1 set 9 080 263 19 sets 350 192 363 62 0 073 210 1 set 9 080 264 19 sets 380 224 393 62 0 048 903 1 set 9 080 265 19 sets 400 224 413 74 0 073 211 1 set 9 080 266 19 sets 420 224 433 74 0 033 686 1 set 9 080 267 19 sets 450 256 463 86 0 073 212 1 set 9 080 268 19 sets 480 256 493 86 0 047 481 1 set 9 080 269 19 sets 500 288 513 98 0 033 687 1 set 9 080 270 19 sets 520 288 533 98 0 047 482 1 set 9 080 271 19 sets 550 320 563 98 0 073 214 1 set 9 080 272 19 sets 580 352 593 110 0 048 904 1 set 9 080 273 19 sets 600 352 613 110 0 073 215 1 set 9 080 274 15 sets 650 384 663 134 0 073 2 1 set 9 080 275 15 sets Catch for wooden drawers For safely connecting the Quadro extension and wooden drawer without the aid of tools (slide-on assembly) Infinite height adjustment up to + 2 mm via a knurled wheel (toolless) The set height is retained when the drawer is dismantled Details see page 5.4.12 Black plastic Article Order no. PU Catch left 0 075 806 100 Catch right 0 075 807 100 Set left/right 9 058 303 1/5 sets Pull-out combination system for front and inside drawer see group 9.1 Catch for pull-out shelves/wooden drawers with flush bottom see page 5.4.13 Solid wood drawer insert Variario see page 5.4.14-5.4.15 Processing technology see group 2 5.4.10 Drawer slides Quadro www.hettich.com

Partial-extension for wooden drawers with grooved frame Quadro 30 Load capacity 30 kg ø4 ø6,3 max. 7 ø6 12 9,5 11 33 12-15 EB 20 23,5 Dimensions mm Order no. PU 6,3 x 10,5 0 051 264 200 6,3 x 14 0 051 265 200 4,0 x 0 010 085 200 Cabinet front edge Nominal length 10 ø6 11 ø4 ø6,3 9 32 9 32 12 33 EL 37 b1 Min. cabinet depth = minimum number of screw-fixing positions Assembly Disassembly Drawer slides Quadro 5.4.11

Accessories Quadro V6 Silent System/Quadro V6 Quadro 30 Silent System/Quadro 30 Catch for wooden drawers For safely connecting the Quadro extension and wooden drawer without the aid of tools (slide-on assembly) Infinite height adjustment up to + 2 mm via a knurled wheel (toolless) The set height is retained when the drawer is dismantled Black plastic Article Order no. PU Catch left 0 075 806 100 Catch right 0 075 807 100 Set left/right 9 058 303 1/5 sets Cabinet side 9 Drawer frame Quadro max. 79 64 48 Mounting with countersunk wood screws ø 3,5 10 6 7,5 Fixing options Stepless height adjustment of +2 mm Three-sided wooden drawer Four-sided wooden drawer Internal pot-and-pan drawer 5.4.12 Drawer slides Quadro www.hettich.com

Accessories Quadro V6 Silent System/Quadro V6 Quadro 30 Silent System/Quadro 30 Catch for pull-out shelves/wooden drawers with flush bottom For safely connecting the Quadro extension and pull-out shelf without the aid of tools (slide-on assembly) For - 19 mm pull-out shelves Complete with 2 rear mountings; the length of the pull-out shelf/drawer is reduced by 12 mm when using these mountings Black plastic Order no. PU 0 075 808 1/5 sets Chipboard screw ø 3,5 Pull-out shelf/drawer length = nominal length - 12 mm Pull-out shelf/drawer width = inside cabinet width - mm 13 10 32 7 12 10 37,4 Quadro 26,5 Chipboard screw ø 3,5 47,5 ø8 x 13 20 Chipboard screw ø 3,5 6 Drawer slides Quadro 5.4.13

Solid wood drawer insert Variario Variable width adjustable Variable width adjustable from 351-559 mm or 710-1126 mm For nominal drawer length 500 mm Can be ideally combined with organizer accessories, see below and page 5.4.15 Beech lacquered Width mm Order no. PU 351-559 9 079 300 1 710-1126 9 079 301 1 C A 57 A B B A B 473 351-559 57 A 710-1126 473 Cutlery insert for insertion in compartment A With 5 diagonal compartments Width 208 mm Depth 418 mm Beech lacquered 418 208 Order no. PU 9 079 351 1 Knife holder for insertion in compartment A For 6 knives Width 208 mm Depth 418 mm Beech lacquered 418 208 Order no. PU 9 079 350 1 5.4.14 Drawer slides Quadro www.hettich.com

Solid wood drawer insert Variario Variable width adjustable Roll holder for insertion in compartment B For 2 rolls Width 208 mm, can be cut to 130 mm Depth 440 mm Stainless steel/beech lacquered Order no. PU 9 079 359 1 440 208 Cutlery insert for insertion in compartment B With 2 compartments Width 208 mm, can be cut to 110 mm Depth 440 mm Beech lacquered 440 208 Order no. PU 9 079 354 1 Spice box holder for insertion in compartments B and C For 5 jars Width 85 mm Depth 440 mm Beech lacquered ø53 440 Order no. PU 9 079 357 1 85 Stainless steel containers for spice box holders 60 Article Order no. PU Salt-cellar 0 080 852 1 Pepper-pot 0 080 853 1 Duster, e.g. for icing sugar 0 080 854 1 Coarse duster 0 080 855 1 Fine duster 0 080 856 1 with acrylic lid 0 080 857 1 ø50 Drawer slides Quadro 5.4.15

Full-extension for wooden drawers with rebated frame Quadro V6+ Silent System Load capacity 50 kg Slide-on assembly simply place the drawer on the slides and push home Silent System the integrated dampened closure mechanism lets drawers close gently and quietly The integrated roll-out prevention stops accidental opening Perfect vertical and lateral stability. The robust, resilient tracks ensure optimal slide action through precison-guided steel balls. Maintenance-free through self-cleaning ball tracks Nominal length/slide length Hole spacing mm Min. cabinet depth Order no. mm b1 b2 mm PU 1 set PU 8 sets 300 0-315 9 079 070 9 079 694 350 192-365 9 079 074 9 079 697 420 224-435 0 048 354 9 079 698 470 256-485 0 048 355 9 079 699 520 256-535 0 048 356 9 079 032 620 352 64 635 0 040 269 9 079 044 Catch for wooden drawers with rebated frame For safely connecting the Quadro extension and wooden drawer without the aid of tools (slide-on assembly) Infinite height adjustment up to + 2 mm via a knurled wheel (toolless) The set height is retained when the drawer is dismantled Black plastic Article Order no. PU Catch left 1 081 030 100 Catch right 1 081 031 100 Set left/right 9 080 297 1/5 sets 9 Cabinet side Drawer frame Quadro 8 79 64 48 Mounting with countersunk wood screws ø 3,5 10 6 7,5 Processing technology see group 2 5.4. Drawer slides Quadro www.hettich.com

Full-extension for wooden drawers with rebated frame Quadro V6+ Silent System Load capacity 50 kg ø4 ø6,3 8 7 ø6 12 9,5 11 42 12-15 31,5 EB 12,5 26 Dimensions mm Order no. PU 6,3 x 10,5 0 051 264 200 6,3 x 14 0 051 265 200 4,0 x 0 010 085 200 10 ø6 11 Cabinet front edge ø4 ø6,3 Nominal length 9 32 9 32 12 42 37 b1 b2 Min. cabinet depth = minimum number of screw-fixing positions Assembly Disassembly Drawer slides Quadro 5.4.17

Full-extension for wooden drawers with rebated frame Quadro V6 Silent System Load capacity 30 kg Slide-on assembly simply place the drawer on the slides and push home Silent System the integrated dampened closure mechanism lets drawers close gently and quietly The integrated roll-out prevention stops accidental opening. Perfect vertical and lateral stability. The robust, resilient tracks ensure optimal slide action through precison-guided steel balls. Maintenance-free through self-cleaning ball tracks Nominal length/slide length Hole spacing Min. cabinet depth Order no. mm b1 mm mm PU 1 set PU 10 sets 260 0 279 0 045 298 9 079 636 300 0 315 9 079 229 9 079 638 350 0 365 0 045 299 9 079 640 420 224 435 0 045 301 9 079 641 470 256 485 0 045 302 9 079 643 520 256 535 0 045 303 9 079 652 Catch for wooden drawers with rebated frame For safely connecting the Quadro extension and wooden drawer without the aid of tools (slide-on assembly) Infinite height adjustment up to + 2 mm via a knurled wheel (toolless) The set height is retained when the drawer is dismantled Black plastic Article Order no. PU Catch left 1 081 030 100 Catch right 1 081 031 100 Set left/right 9 080 297 1/5 sets 9 Cabinet side Drawer frame Quadro 8 79 64 48 Mounting with countersunk wood screws ø 3,5 10 6 7,5 Processing technology see group 2 5.4.18 Drawer slides Quadro www.hettich.com

Full-extension for wooden drawers with rebated frame Quadro V6 Silent System Load capacity 30 kg ø4 ø6,3 8 7 ø6 12 9,5 11 36 12-15 26,5 EB 12,5 26 Dimensions mm Order no. PU 6,3 x 10,5 0 051 264 200 6,3 x 14 0 051 265 200 4,0 x 0 010 085 200 10 ø6 11 Cabinet front edge Nominal length ø4 ø6,3 9 32 9 32 12 36 37 b1 Min. cabinet depth = minimum number of screw-fixing positions Assembly Disassembly Drawer slides Quadro 5.4.19

Part-extension for wooden drawers Quadro 25 Silent System Load capacity 25 kg Plug-on assembly simply place the drawer on the locating pins and slides Silent System the integrated dampened closure mechanism lets drawers close gently and quietly The integrated roll-out prevention stops accidental opening Integrated height adjustment up to + 3 mm Perfect vertical and lateral stability. The robust, resilient tracks ensure optimal slide action through precison-guided steel balls. Maintenance-free through self-cleaning ball tracks Nominal length/slide length Hole spacing mm Min. cabinet depth Extension loss Order no. mm b1 C mm EL mm PU 1 set PU 12 sets 250 0 188,5 263 50 9 080 276 0 043 645 300 0 188,5 313 50 9 080 277 0 043 646 320 192 221,5 333 62 9 080 278 0 043 647 350 192 221,5 363 62 9 080 279 0 043 648 380 224 249,5 393 62 9 080 280 0 043 649 400 224 249,5 413 74 9 080 281 0 043 651 450 256 283,5 463 86 9 080 282 0 043 652 500 288 309,5 513 98 9 080 283 0 043 654 550 320 338,5 563 98 9 080 284 0 043 655 Push-on holder For drawers with flush bottom and pull-out shelves Plastic Article Finish Order no. PU Front mounting beige 0 047 2 1/200 Rear mounting* white 0 073 213 1/200 * The length of the pull-out shelf/drawer is reduced by 10 mm when using rear mountings Solid wood drawer insert Variario see page 5.4.14-5.4.15 Processing technology see group 2 5.4.20 Drawer slides Quadro www.hettich.com

Part-extension for wooden drawers Quadro 25 Silent System Load capacity 25 kg Grooved bottom panel Flush bottom panel ø4 ø6,3 max. 7 ø6 10 10 13 20 26,5 8 ø4 ø6,3 ø6 34 12 9,5 ø6 11 10 24,5 C C 8 ø6 x 10 6 EB 20 25 EB 20 Dimensions mm Order no. PU 6,3 x 10,5 0 051 264 200 6,3 x 14 0 051 265 200 4,0 x 0 010 085 200 Cabinet front edge 10 ø6 11 Nominal length C ø4 ø6,3 9 32 9 32 12 34 EL 37 b1 Min. cabinet depth = minimum number of screw-fixing positions Assembly Grooved bottom panel Flush bottom panel Drawer slides Quadro 5.4.21

Part-extension for wooden drawers Quadro 25 Load capacity 25 kg Stop Control Plug-on assembly simply place the drawer on the locating pins and slides Stop Control the integrated self-closing mechanism closes drawers reliably and automatically and prevents them opening inadvertently Integrated height adjustment + 3 mm Perfect vertical and lateral stability. The robust, resilient tracks ensure optimal slide action through precison-guided steel balls. Maintenance-free through self-cleaning ball tracks Nominal length/slide length Hole spacing mm Min. cabinet depth Extension loss Order no. PU mm b1 C mm EL mm 250 0 188,5 263 50 0 072 154 1/18 sets 300 0 188,5 313 50 0 046 364 1/18 sets 350 192 221,5 363 62 0 046 365 1/18 sets 400 224 249,5 413 74 0 046 366 1/18 sets 450 256 283,5 463 86 0 046 367 1/18 sets 500 288 309,5 513 98 0 046 368 1/18 sets 550 320 338,5 563 98 0 046 369 1/18 sets 600 352 370,5 613 110 0 046 370 1/18 sets 650 384 400,0 663 122 0 046 371 1/18 sets 700 4 430,0 713 134 0 046 372 1/18 sets Push-on holder For drawers with flush bottom and pull-out shelves Plastic Article Finish Order no. PU Front mounting beige 0 047 2 1/200 Rear mounting* white 0 073 213 1/200 * The length of the pull-out shelf/drawer is reduced by 10 mm when using rear mountings Solid wood drawer insert Variario see page 5.4.14-5.4.15 Processing technology see group 2 5.4.22 Drawer slides Quadro www.hettich.com

Part-extension for wooden drawers Quadro 25 Load capacity 25 kg Grooved bottom panel Flush bottom panel 33 ø6 10 10 13 ø4 ø6,3 ø4 ø6,3 max. 7 20 26,5 8 ø6 ø6 11 C C 12 9,5 8 10 23,5 ø6 x 10 6 EB 20 EB 20 Dimensions mm Order no. PU 6,3 x 10,5 0 051 264 200 6,3 x 14 0 051 265 200 4,0 x 0 010 085 200 Cabinet front edge Nominal length C 10 ø6 11 ø4 ø6,3 9 32 9 32 12 33 EL 37 b1 Min. cabinet depth = minimum number of screw-fixing positions Assembly Grooved bottom panel Flush bottom panel Drawer slides Quadro 5.4.23

Over-extension for wooden drawers Quadro 40 Load capacity 40 kg Plug-on assembly simply place the drawer on the locating pins and slides Perfect vertical and lateral stability. The robust, resilient tracks ensure optimal slide action through precison-guided steel balls. Maintenance-free through self-cleaning ball tracks With roll-out prevention and bumpers one roll-out prevention (order number 0 064 338) and two bumpers are enclosed per set Drawer length Hole spacing mm Min. cabinet depth Over-extension Order no. PU mm b1 C mm OE mm 280-400 192 249,5 293-413 28 0 047 213 1/12 sets 350-500 256 309,5 363-513 29 0 047 214 1/12 sets 470-700 352 430,0 483-713 25 0 047 215 1/12 sets Push-on holder For drawers with flush bottom and pull-out shelves Plastic Article Finish Order no. PU Front mounting beige 0 047 2 1/200 Rear mounting* white 0 073 213 1/200 * The length of the pull-out shelf/drawer is reduced by 10 mm when using rear mountings Solid wood drawer insert Variario see page 5.4.14-5.4.15 Processing technology see group 2 5.4.24 Drawer slides Quadro www.hettich.com

Over-extension for wooden drawers Quadro 40 Load capacity 40 kg Grooved bottom panel Flush bottom panel ø4 ø6,3 max. 7 ø6 ø6 10 10 13 20 26,5 8 ø4 ø6,3 ø6 11 8 7,5 10 C C 29 36,5 6 ø6 x 10 EB 20 EB 20 Dimensions mm Order no. PU 6,3 x 10,5 0 051 264 200 6,3 x 14 0 051 265 200 4,0 x 0 010 085 200 Cabinet front edge Drawer length C ø4 ø6,3 10 ø6 11 Rubber bumper 9 23 9 32 29 OE 37 b1 Min. cabinet depth = minimum number of screw-fixing positions Assembly Grooved bottom panel Flush bottom panel Drawer slides Quadro 5.4.25

Full-extension for base mounting Quadro V6 BM Silent System Load capacity 30 kg i Slide-on assembly simply place the drawer on the slides and push home Silent System the integrated dampened closure mechanism lets drawers close gently and quietly The integrated roll-out prevention stops accidental opening Perfect vertical and lateral stability. The robust, resilient tracks ensure optimal slide action through precison-guided steel balls. Maintenance-free through self-cleaning ball tracks Nominal length/drawer length Hole spacing Min. cabinet depth Order no. PU mm mm mm 350 256 363 9 079 486 1 set 400 288 413 9 079 523 1 set 450 256 463 9 079 437 1 set 500 256 513 9 079 454 1 set Catch for wooden drawers For safely connecting the Quadro extension and wooden drawer without the aid of tools (slide-on assembly) Infinite height adjustment up to + 2 mm via a knurled wheel (toolless) The set height is retained when the drawer is dismantled Details see page 5.4.12 Black plastic Article Order no. PU Catch left 0 075 806 100 Catch right 0 075 807 100 Set left/right 9 058 303 1/5 sets Catch for pull-out shelves/wooden drawers with flush bottom For safely connecting the Quadro extension and pull-out shelf without the aid of tools (slide-on assembly) For - 19 mm pull-out shelves Complete with 2 rear mountings; the length of the pull-out shelf/drawer is reduced by 12 mm when using these mountings Details see page 5.4.13 Black plastic Order no. PU 0 075 808 1/5 sets Solid wood drawer insert Variario see page 5.4.14-5.4.15 Processing technology see group 2 5.4.26 Drawer slides Quadro www.hettich.com

Full-extension for base mounting Quadro V6 BM Silent System Load capacity 30 kg max. 7 ø6 11 24 12-15 28 EB 20 22,5 28 ø4 Dimensions mm Order no. PU 4,0 x 0 010 085 200 10 ø6 11 Cabinet front edge Nominal length ø4 99 99 37 b1 Min. cabinet depth At least 4 screws per Quadro for attaching to base Assembly Disassembly Drawer slides Quadro 5.4.27

Partial-extension for bottom panels Quadro 40 BM Load capacity 40 kg Plug-on assembly simply place the drawer on the locating pins and slides Perfect vertical and lateral stability. The robust, resilient tracks ensure optimal slide action through precison-guided steel balls. Maintenance-free through self-cleaning ball tracks Integrated height adjustment + 3 mm With roll-out guard one roll-out guard is included in each set (order no. 0 064 338) Drawer length Hole spacing mm Min. cabinet depth Extension loss Order no. PU mm b1 C mm EL mm 270-395 192 249,5 283-408 75 0 066 079 1 set 330-490 256 309,5 343-503 99 0 066 075 1 set 455-680 384 430,0 468-693 147 0 066 065 1 set Push-on holder For drawers with flush bottom and pull-out shelves Plastic Article Finish Order no. PU Front mounting beige 0 047 2 1/200 Rear mounting* white 0 073 213 1/200 * The length of the pull-out shelf/drawer is reduced by 10 mm when using rear mountings Solid wood drawer insert Variario see page 5.4.14-5.4.15 Processing technology see group 2 5.4.28 Drawer slides Quadro www.hettich.com

Partial-extension for bottom panels Quadro 40 BM Load capacity 40 kg Grooved bottom panel Flush bottom panel ø6 10 10 13 7 20 26,5 ø6 ø6 11 C C 8 10 19,5 ø6 x 10 12 6 27,5 47 47 27,5 ø4 Dimensions mm Order no. PU 4,0 x 0 010 085 200 Cabinet front edge Drawer length C 10 ø6 11 ø4 32 32 37 EL b1 Min. cabinet depth At least 4 screws per Quadro for attaching to base Assembly Grooved bottom panel Flush bottom panel Drawer slides Quadro 5.4.29

Drawer opening system P 2 O (Push-To-Open) for Quadro drawer slides with integrated self-closing function Push-To-Open For opening handleless wooden drawers A nudge is all it takes to open the drawer Suitable for use with Quadro drawer slides for slide-on assembly (see pages 5.4.8-5.4.11) and Quadro drawer slides for plug-on assembly (see pages 5.4.22-5.4.25) A trial mounting is recommended Set contains: P 2 O-mechanical Screw-on panel plate ø3 Order no. PU 9 079 606 1 set 13 ø3 ø3 14,5 42,5 19 adjustable 85 0-3 mm 42,5 19 41,5 85 Mounting examples! 5.4.30 Drawer slides Quadro www.hettich.com

Accessories for drawer slides Quadro Stop attachment For 5 mm hole diameter Transparent plastic Stop attachment For 6 mm hole diameter Plastic ø8 ø8 1,5 7 ø6 Order no. PU 9 079 298 1/1000 1,5 5,5 ø5 Finish Order no. PU white 0 025 048 1/1000 brown 0 021 154 1/1000 beige 0 047 353 1/1000 Stop attachment ø 8 mm, self-adhesive Transparent plastic Bracket For fixing drawer bottoms and rear panels White plastic 10,7 15 4,7 Order no. PU 0 072 120 50 0 046 695 1000 Order no. PU 0 079 438 1/200 Front panel fitting For two-dimensional adjustment of fronts on 4-sided drawers For knocking into the drawer fronts White plastic ø5 ± ± ø20 10 Use ø 4 mm countersunk screws to fix the front panel fitting. Order no. PU 0 071 833 1/200 Screw length = frame thickness + 10 mm fitting thickness After adjustment, the front panel must be secured by means of one additional countersunk screw. Spacer discs/bar see page 5.4.55 Drawer slides Quadro 5.4.31

Range summary/technical comparison Ball bearing slides i Ball bearing slide systems for slot mounting KA 1730 KA 270 KA 290 Page number 5.4.34 5.4.35 5.4.36 Brief description Part-extension Part-extension Over-extension Load capacity 10 kg 12 kg 20 kg For drawer lengths 155-550 mm 230-550 mm 200-550 mm Groove measurement 17 mm 27 mm 27 mm Ball bearing slide systems for 12,7 mm installed width, mounted on sides KA 3432 KA 5332 KA 5632 SC Page number 5.4.37 5.4.38 5.4.39 Brief description Part-extension, detachable Full-extension, detachable Full-extension with integrated self-closing effect, detachable Load capacity 34 kg 30 kg 40 kg For drawer lengths 250-700 mm 350-550 mm 300-700 mm Ball bearing slide systems for 12,7 mm installed width, mounted on sides Page number KA 5632 5.4.40 KA 4932 5.4.41 Brief description Full-extension, detachable Over-extension, detachable Load capacity 45 kg 60 kg For drawer lengths 250-700 mm 250-700 mm 5.4.32 Range summary of ball bearing slides www.hettich.com

i Range summary/technical comparison Ball bearing slides Ball bearing slide systems for 12,7 mm installed width with screw-on assembly Page number KA 5632 AM 5.4.42 KA 4932 AM 5.4.43 Brief description Full-extension, detachable Over-extension, detachable Load capacity 45 kg 60 kg For drawer lengths 350-600 mm 350-600 mm Ball bearing slide systems for heavy loads KA 4620 KA 3320 KA 3550 Page number 5.4.44 5.4.45 5.4.46 Brief description Over-extension for Full-extension for Over-extension for 19 mm installed width, detachable 19 mm installed width 24 mm installed width Load capacity 90 kg 136 kg 143-214 kg For drawer lengths 300-700 mm 310-910 mm 305-711 mm Accessories Page number Stop attachment/ bracket/front panel fitting 5.4.47 Range summary of ball bearing slides 5.4.33

Part-extension for wooden drawers Ball bearing slide KA 1730 17 mm groove, load capacity 10 kg Precision partial-extension slide with pull-out stop and roll-out prevention Slide and ball race form a single inseparable unit Smooth action and high side stability through precision slide Arrow marking fitting direction Additional front support for drawers longer than 430 mm For wooden drawers with grooved, rebated or loosely fitted bases Galvanized steel Nominal Drawer Extension Hole spacing Cabinet Drawer slide Order no. PU length mm length loss mm rail mm mm EL mm b1 C mm 200 155-210 32 96 101 150 133 0 079 054 1/20 sets 250 185-260 44 128 132 182 4 0 079 055 1/20 sets 300 185-305 44 128 153 182 185 0 030 765 1/20 sets! 330 220-340 56 0 178 214 210 0 066 933 1/20 sets 350 220-355 56 0 185 214 217 0 071 835 1/20 sets 380 250-390 68 192 209 246 241 0 071 836 1/20 sets 400 250-410 68 192 217 246 249 0 030 766 1/20 sets Front support from 430 mm 430 430 86 224 398 278 430 0 079 056 1/20 sets 450 450 86 224 418 278 450 0 030 767 1/20 sets 480 480 98 256 448 310 480 0 079 057 1/20 sets 500 500 98 256 468 310 500 0 030 768 1/20 sets 550 550 110 288 518 342 550 0 030 769 1/20 sets 2 M4 x 9 screws are included in every set Cabinet front edge 10 6-7 max. 13 M4x9 Drawer length ø3,5 ø6,3 17 8,5 8,5 C 32 9 32 M4 EL 37 b1 Min. cabinet depth = drawer length + 1 = minimum number of screw-fixing positions Assembly ø3,5 ø6,3 Fixing screws Dimensions mm Order no. PU ø 6,3 x 10,5 0 051 264 200 ø 6,3 x 14 0 051 265 200 ø 3,5 x 12 9 079 791 200 ø 3,5 x 0 071 925 200 M4 x 9 0 079 527 200 Processing technology see group 2 5.4.34 Ball bearing slides www.hettich.com

Part-extension for wooden drawers Ball bearing slide KA 270 27 mm groove, load capacity 12 kg Precision partial-extension slide with pull-out stop and roll-out prevention Slide and ball race form a single inseparable unit Smooth action and high side stability through precision slide For wooden drawers with grooved, rebated or loosely fitted bases Galvanized steel Nominal Drawer Extension Hole spacing Cabinet Drawer Order no. PU length mm length loss mm rail slide mm mm EL mm b1 C mm 350 230-350 56 0 190 214 222 0 025 155 1/10 sets 550 350-550 80 288 296 342 328 0 025 156 1/10 sets 2 M4 x 9 screws are included in every set 13,5 27 13,5 6-7 10 max. 13 M4x9 Drawer length C Cabinet front edge ø3,5 ø6,3 32 9 32 M4 ø3,5 ø6,3 37 EL b1 Min. cabinet depth = Drawer length + 1 = minimum number of screw-fixing positions Assembly Fixing screws Dimensions mm Order no. PU ø 6,3 x 10,5 0 051 264 200 ø 6,3 x 14 0 051 265 200 ø 3,5 x 12 9 079 791 200 ø 3,5 x 0 071 925 200 M4 x 9 0 079 527 200 Processing technology see group 2 Ball-bearing slides 5.4.35

Over-extension for wooden drawers Ball bearing slide KA 290 27 mm groove, load capacity 20 kg Precision full-extension slide with pull-out stop and roll-out prevention Slide and ball race form a single inseparable unit Smooth action and high side stability through precision slide For wooden drawers with grooved, rebated or loosely fitted bases Galvanized steel Nominal Drawer Over-extension Hole spacing Cabinet rail Drawer Order no. PU length mm length OE mm mm mm slide mm mm b1 C 310 200-310 24 192 5 246 197 0 026 561 1/5 sets 450 310-450 24 256 271 310 303 0 026 562 1/5 sets 550 450-550 40 256 296 310 328 0 026 578 1/5 sets Cabinet front edge 2 M4 x 9 screws are included in every set Drawer length C 9 32 ø3,5 ø6,3 32 M4 OE 37 b1 Min. cabinet depth for drawer length 200 up to 249 = 250, for drawers longer than 250 = drawer length +1 max. 13 = minimum number of screw-fixing positions 27 13,5 13,5 M4x9 6-7 20 Assembly ø3,5 ø6,3 Fixing screws Dimensions mm Order no. PU ø 6,3 x 10,5 0 051 264 200 ø 6,3 x 14 0 051 265 200 ø 3,5 x 12 9 079 791 200 ø 3,5 x 0 071 925 200 M4 x 9 0 079 527 200 Processing technology see group 2 5.4.36 Ball-bearing slides www.hettich.com

Part-extension for wooden drawers Ball bearing slide KA 3432 12,7 mm installation width, load capacity 34 kg! Precision partial-extension slide with pull-out stop and roll-out prevention Using a release lever, the drawer can be detached from the slide and thus removed and re-fitted with ease. Smooth action and high side stability through precision slide For wooden drawers with grooved, rebated or loosely fitted bases Galvanized steel, blue passivated Drawer Min. cabinet Extension Hole spacing mm Order no. PU length mm depth mm loss EL mm b1 b2 b3 C 250 254 60 - - - 192 0 041 344 1 set 300 304 65 96 - - 242 0 041 345 1 set 350 354 72 96 - - 292 0 041 346 1 set 400 404 84 96 96-342 0 041 347 1 set 450 454 97 96 128-392 0 041 348 1 set 500 504 109 96 128 64 442 0 041 349 1 set 550 554 122 96 128 96 492 0041351 1 set 600 604 134 96 128 128 542 0 041 352 1 set 650 654 147 96 128 192 592 0 041 353 1 set 700 704 159 96 128 224 642 0 041 354 1 set Cabinet front edge 37 Drawer length C ø4 ø6,3 Fix to drawer with at least 8 screws 2 EL 12,7 37 128 b1 b2 b3 17,5 35 17,5 ø4 Min. cabinet depth = minimum number of screw-fixing positions Assembly ø4 ø6,3 Fixing screws Dimensions mm Order no. PU ø 6,3 x 10,5 0 051 264 200 ø 6,3 x 14 0 051 265 200 ø 4,0 x 0 010 085 200 ø 4,0 x 12 0 058 243 200 Processing technology see group 2 Ball-bearing slides 5.4.37

Full-extension for wooden drawers Ball bearing slide KA 5332 12,7 mm installation width, load capacity 30 kg! Precision full-extension slide with pull-out stop and roll-out prevention Using a release lever, the drawer can be detached from the slide and thus removed and re-fitted with ease. Smooth action and high side stability through precision slide For wooden drawers with grooved, rebated or loosely fitted bases Galvanized steel, blue passivated Drawer Min. cabinet Hole spacing mm Order no. PU length mm depth mm b1 b2 b3 b4 C 350 354 - - 292 9 057 402 1/10 sets 400 404 96-342 9 057 403 1/10 sets 450 454 128-392 9 057 404 1/10 sets 500 504 128 64 442 9 057 405 1/10 sets 550 554 128 64 32 32 492 9 057 407 1/10 sets Cabinet front edge 37 C Drawer length ø4 ø6,3 Fix to drawer with at least 8 screws 37 128 96 b1 b2 b3 b4 Min. cabinet depth = minimum number of screw-fixing positions 12,7 46 23 23 ø4 Assembly ø4 ø6,3 Fixing screws Dimensions mm Order no. PU ø 6,3 x 10,5 0 051 264 200 ø 6,3 x 14 0 051 265 200 ø 4,0 x 0 010 085 200 ø 4,0 x 12 0 058 243 200 Processing technology see group 2 5.4.38 Ball bearing slides www.hettich.com

Stop Control Full-extension for wooden drawers Ball bearing slide KA 5632 SC with self-closing facility 12,7 mm installation width, load capacity 40 kg! Precision full-extension slide the integrated self-closing feature reliably and automatically closes the drawer Using a release lever, the drawer can be detached from the slide and thus removed and re-fitted with ease. Smooth action and high side stability through precision slide For wooden drawers with grooved, rebated or loosely fitted bases Galvanized steel, blue passivated or black Drawer Min. cabinet Hole spacing mm Order no. PU length mm depth mm b1 b2 b3 b4 C blue passivated black 300 304 - - 242 9 080 470 9 080 483 1 set 350 354 - - 292 9 080 471 9 080 484 1 set 400 404 96-342 9 080 474 9 080 486 1 set 450 454 128-392 9 080 475 9 080 487 1 set 500 504 128 64 442 9 080 476 9 080 488 1 set 550 554 128 64 32 32 492 9 080 478 9 080 489 1 set 600 604 128 96 32 32 542 9 080 479 9 080 490 1 set 650 654 128 0 32 32 592 9 080 480 9 080 492 1 set 700 704 128 192 32 32 642 9 080 481 9 080 493 1 set! Cabinet front edge 37 C Drawer length ø4 ø6,3 Fix to drawer with at least 8 screws 12,7 37 128 96 b1 b2 b3 b4 Min. cabinet depth = minimum number of screw-fixing positions 46 23 23 ø4 Assembly ø4 ø6,3 Fixing screws Dimensions mm Order no. PU ø 6,3 x 10,5 0 051 264 200 ø 6,3 x 14 0 051 265 200 ø 4,0 x 0 010 085 200 ø 4,0 x 12 0 058 243 200 Processing technology see group 2 Ball bearing slides 5.4.39

Full-extension for wooden drawers Ball bearing slide KA 5632 12,7 mm installation width, load capacity 45 kg! Precision full-extension slide with pull-out stop and roll-out prevention Using a release lever, the drawer can be detached from the slide and thus removed and re-fitted with ease. Smooth action and high side stability through precision slide For wooden drawers with grooved, rebated or loosely fitted bases Galvanized steel, blue passivated or black Drawer Min. cabinet Hole spacing mm Order no. PU length mm depth mm b1 b2 b3 b4 b5 C blue passivated black 250 254 - - - 192 0 073 276 0 044 9 1 set 300 304 96 - - 242 0 073 277 0 044 915 1 set 350 354 96 - - 292 0 073 278 0 044 914 1 set 400 404 96 96-342 0 073 279 0 044 913 1 set 450 454 96 128-392 0 073 280 0 044 912 1 set 500 504 96 128 64 442 0 073 281 0 044 911 1 set 550 554 96 128 64 32 32 492 0 073 282 0 044 909 1 set 600 604 96 128 96 32 32 542 0 073 283 0 044 908 1 set 650 654 96 128 0 32 32 592 0 073 284 0 044 907 1 set 700 704 96 128 192 32 32 642 0 041 355 0 044 906 1 set! Cabinet front edge 37 C Drawer length ø4 ø6,3 Fix to drawer with at least 8 screws 12,7 37 128 b1 b2 b3 b4 b5 Min. cabinet depth = minimum number of screw-fixing positions 46 23 23 ø4 Assembly ø4 ø6,3 Fixing screws Dimensions mm Order no. PU ø 6,3 x 10,5 0 051 264 200 ø 6,3 x 14 0 051 265 200 ø 4,0 x 0 010 085 200 ø 4,0 x 12 0 058 243 200 Ball bearing slide KA 5632 in conjunction with central locking Stop Control see group 6.1 Processing technology see group 2 5.4.40 Ball bearing slides www.hettich.com

Over-extension for wooden drawers Ball bearing slide KA 4932 12,7 mm installation width, load capacity 60 kg! Precision full-extension slide with pull-out stop and roll-out prevention Using a release lever, the drawer can be detached from the slide and thus removed and re-fitted with ease. Smooth action and high side stability through precision slide For wooden drawers with grooved, rebated or loosely fitted bases Galvanized steel, blue passivated Drawer Min. cabinet Hole spacing mm Order no. PU length mm depth mm b1 b2 b3 b4 b5 C 250 254 - - - - - 192 0 041 356 1 set 300 304 96 - - - - 242 0 041 357 1 set 350 354 96 - - - - 292 0 041 358 1 set 400 404 96 96 - - - 342 0 041 359 1 set 450 454 96 128 - - - 392 0041361 1 set 500 504 96 128 64 - - 442 0 041 362 1 set 550 554 96 128 64 32 32 492 0 041 363 1 set 600 604 96 128 96 32 32 542 0 041 364 1 set 650 654 96 128 0 32 32 592 0 041 365 1 set 700 704 96 128 192 32 32 642 0 041 366 1 set Cabinet front edge ø4 ø6,3 37 Drawer length C Fix to drawer with at least 8 screws 38 37 128 b1 b2 b3 b4 b5 12,7 Min. cabinet depth = minimum number of screw-fixing positions 50 25 25 ø4 Assembly ø4 ø6,3 Fixing screws Dimensions mm Order no. PU ø 6,3 x 10,5 0 051 264 200 ø 6,3 x 14 0 051 265 200 ø 4,0 x 0 010 085 200 ø 4,0 x 12 0 058 243 200 Processing technology see group 2 Ball bearing slides 5.4.41

Full-extension for wooden drawers Ball bearing slide KA 5632 AM, overlay assembly 12,7 mm installation width, load capacity 45 kg! Precision full-extension slide with pull-out stop and roll-out prevention Overlay drawer assembly Using a release lever, the drawer can be detached from the slide and thus removed and re-fitted with ease. Smooth action and high side stability through precision slide For wooden drawers with grooved, rebated or loosely fitted bases Galvanized steel, blue passivated Drawer Min. cabinet Hole spacing mm Order no. PU length mm depth mm b1 b2 b3 b4 C 350 354 - - 283 9 080 285 1 set 400 404 96-333 9 080 286 1 set 450 454 128-383 9 080 287 1 set 500 504 128 64 433 9 080 288 1 set 550 554 128 64 32 32 483 9 080 289 1 set 600 604 128 96 32 32 533 9 080 290 1 set 37 C Drawer length Cabinet front edge ø4 ø6,3 37 128 96 b1 b2 b3 b4 Min. cabinet depth = minimum number of screw-fixing positions 46 23 23 12,7 8,7 ø4 15 Assembly ø4 ø6,3 Fixing screws Dimensions mm Order no. PU ø 6,3 x 10,5 0 051 264 200 ø 6,3 x 14 0 051 265 200 ø 4,0 x 0 010 085 200 ø 4,0 x 12 0 058 243 200 Processing technology see group 2 5.4.42 Ball bearing slides www.hettich.com

Over-extension for wooden drawers Ball bearing slide KA 4932 AM, overlay assembly 12,7 mm installation width, load capacity 60 kg! Precision full-extension slide with pull-out stop and roll-out prevention Overlay drawer assembly Using a release lever, the drawer can be detached from the slide and thus removed and re-fitted with ease. Smooth action and high side stability through precision slide For wooden drawers with grooved, rebated or loosely fitted bases Galvanized steel, blue passivated Drawer Min. cabinet Hole spacing mm Order no. PU length mm depth mm b1 b2 b3 b4 C 350 354 - - - - 283 9 080 291 1 set 400 404 96 - - - 333 9 080 292 1 set 450 454 128 - - - 383 9 080 293 1 set 500 504 128 64 - - 433 9 080 294 1 set 550 554 128 64 32 32 483 9 080 295 1 set 600 604 128 96 32 32 533 9 080 296 1 set 37 C Drawer length Cabinet front edge ø4 ø6,3 38 37 128 96 b1 b2 b3 b4 = minimum number of screw-fixing positions Min. cabinet depth 25 12,7 8,7 ø4 Assembly 50 25 15 ø4 ø6,3 Fixing screws Dimensions mm Order no. PU ø 6,3 x 10,5 0 051 264 200 ø 6,3 x 14 0 051 265 200 ø 4,0 x 0 010 085 200 ø 4,0 x 12 0 058 243 200 Processing technology see group 2 Ball bearing slides 5.4.43

Over-extension for wooden drawers Ball bearing slide KA 4620 19 mm installation width, load capacity 90 kg! Precision full-extension slide with pull-out stop and roll-out prevention Using a release lever, the drawer can be detached from the slide and thus removed and re-fitted with ease. Smooth action and high side stability through precision slide For wooden drawers with grooved, rebated or loosely fitted bases Galvanized steel, blue passivated Drawer length Min. cabinet depth Hole spacing mm Order no. PU mm mm b1 b2 C 300 304 125-233,5 0 041 389 1 set 350 354 175-283,5 0041391 1 set 400 404 111 114 333,5 0 041 392 1 set 450 454 136 139 383,5 0 041 393 1 set 500 504 1 4 433,5 0 041 394 1 set 550 554 186 189 483,5 0 041 395 1 set 600 604 211 214 533,5 0 041 396 1 set 650 654 236 239 583,5 0 041 397 1 set 700 704 261 264 633,5 0 041 398 1 set Cabinet front edge 34 Drawer length C ø4,5 ø6,3 Fix to drawer with at least 8 screws ø8,2 ø4,5 ø6,3 12 12 38 46 57 b1 b2 Min. cabinet depth = minimum number of screw-fixing positions 19 Assembly 58 29 29 ø4,5 ø4,5 ø6,3 Fixing screws Dimensions mm Order no. PU ø 6,3 x 10,5 0 051 264 200 ø 6,3 x 14 0 051 265 200 Processing technology see group 2 5.4.44 Ball bearing slides www.hettich.com

Full-extension for wooden drawers Ball bearing slide KA 3320 19 mm installation width, load capacity 136 kg Precision full-extension runner with push-in and pull-out stops Smooth action and high side stability through precision slide Slide and ball race form a single inseparable unit For wooden drawers with grooved, rebated or loosely fitted bases Galvanized steel Drawer length Min. cabinet depth Hole spacing mm Order no. PU mm mm b1 C 310 312 127,0 217,5 0 073 287 1 set 360 362 178,0 268,5 0 073 288 1 set 410 412 228,5 319,5 0 073 289 1 set 460 462 279,5 370,0 0 073 290 1 set 510 512 330,0 421,0 0 073 291 1 set 560 562 381,0 471,5 0 073 292 1 set 610 612 432,0 522,5 0 073 293 1 set 660 662 482,5 573,5 0 073 294 1 set 710 712 533,5 624,0 0 073 295 1 set 760 762 584,0 675,0 0 073 296 1 set 810 812 635,0 725,0 0 041 367 1 set 860 862 686,0 776,0 0 041 368 1 set 910 912 736,5 827,0 0 041 369 1 set Cabinet front edge Drawer length 34 C ø5 Fix to drawer with at least 8 screws 5x 9,5 15 ø8 8x10 76 b1 76 Min. cabinet depth = minimum number of screw-fixing positions 19 +0,75 Assembly 38 76 38 ø4,5 ø5 Processing technology see group 2 Ball bearing slides 5.4.45

Over-extension for wooden drawers Ball bearing slide KA 3550 24 mm installation width, load capacity 143-214 kg! Precision over-extension slide with push-in and pull-out stops Smooth action and high side stability through precision slide Slide and ball race form a single inseparable unit For wooden drawers with grooved, rebated or loosely fitted bases Galvanized steel, blue passivated Drawer Min. cabinet Load Over-extension Hole spacing mm Order no. PU length mm depth mm capacity kg OE mm b1 b2 b3 C 305 311 214 17 38,1 123,8-273,0 0 079 794 1 set 356 362 210 21 88,9 123,8-323,8 0 079 795 1 set 406 412 203 21 139,7 123,8-374,6 0 079 796 1 set 457 463 196 21 101,6 88,9 123,8 425,4 0 079 797 1 set 508 514 189 21 127,0 114,3 123,8 476,2 0 079 798 1 set 559 565 180 21 152,4 139,7 123,8 527,0 0 079 799 1 set 610 6 9 21 177,8 5,1 123,8 577,8 0 079 800 1 set 660 666 157 21 203,2 190,5 123,8 628,6 0079801 1 set 711 717 143 21 228,6 215,9 123,8 679,4 0079802 1 set Cabinet front edge Drawer length C ø4,5 ø6,3 Fix to drawer with at least screws 36,1 24+0,6 OE 111,1 b1 b2 b3 17 Min. cabinet depth = minimum number of screw-fixing positions 71,4 36,1 ø4,5 Assembly min.19 ø4,5 ø6,3 Fixing screws Dimensions mm Order no. PU ø 6,3 x 11 0 047 451 200 ø 6,3 x 14 0 047 452 200 Processing technology see group 2 5.4.46 Ball bearing slides www.hettich.com

Accessories for ball bearing slides Stop attachment For 5 mm hole diameter Transparent plastic Stop attachment For 6 mm hole diameter Plastic ø8 ø8 1,5 7 ø6 Order no. PU 9 079 298 1/1000 1,5 5,5 ø5 Finish Order no. PU white 0 025 048 1/1000 brown 0 021 154 1/1000 beige 0 047 353 1/1000 Stop attachment ø 8 mm, self-adhesive Transparent plastic Bracket For fixing drawer bottoms and rear panels White plastic 10,7 15 4,7 Order no. PU 0 072 120 50 0 046 695 1000 Order no. PU 0 079 438 1/200 Front panel fitting For two-dimensional adjustment of fronts on 4-sided drawers For knocking into the drawer fronts White plastic ø5 ± ± ø20 10 Use ø 4 mm countersunk screws to fix the front panel fitting. Order no. PU 0 071 833 1/200 Screw length = frame thickness + 10 mm fitting thickness After adjustment, the front panel must be secured by means of one additional countersunk screw. Ball bearing slides 5.4.47

Range summary/technical comparison Roller runners i FR 302 FR 402 FR 602 Page number 5.4.49 5.4.50 5.4.51 Brief description Part-extension Part-extension Part-extension Load capacity 20 kg 25 kg 35 kg For drawer lengths 250-500 mm 250-600 mm 250-800 mm Page number FR 6142 5.4.52 FR 1105 5.4.53 Brief description Over-extension Part-extension Load capacity 50 kg 80-100 kg For drawer lengths 250-800 mm 400-1000 mm Page number Accessories 5.4.54-5.4.56 Brief description Central locking/ spacer discs/distance rail/ stop attachment/bracket/front panel fitting 5.4.48 Range summary of roller runners www.hettich.com

Part-extension runner for wooden drawers Roller runner FR 302 Load capacity 20 kg With captive guide rail on one side For screw-on assembly Integrated self-closing feature, double stop and roll-out prevention Automatic tolerance compensation ± 1 mm Steel powder-coated white Drawer length Min. cabinet depth Extension loss Hole spacing mm Order no. PU mm mm EL mm b1 b2 b3 b4 250 253 69 64 - - - 0 075 993 1/20 sets 300 303 69 96 - - - 0 075 994 1/20 sets 350 353 69 96 64 - - 0 075 995 1/20 sets 400 403 69 96 128 - - 0 075 996 1/20 sets 450 453 79 96 128 32-0 075 997 1/20 sets 500 503 86 96 128 64 32 0 013 089 1/20 sets Drawer length Cabinet front edge ø3,5 ø6,3 50 Cabinet front edge min.3,5 30 EL 9 37 128 b1 b2 b3 b4 Min. cabinet depth = minimum number of screw-fixing positions Assembly min.2,5 min.1,5 up to 20 min. Double stop engages the extension in the front position 12,5 ±1 12,5 11 35 ø3,5 ø3,5 ø6,3 Dimensions mm Order no. PU ø 6,3 x 10,5 0 051 264 200 ø 6,3 x 14 0 051 265 200 ø 3,5 x 12 9 079 791 200 ø 3,5 x 0 071 925 200 Processing technology see group 2 Roller runners 5.4.49

Part-extension runner for wooden drawers Roller runner FR 402 Load capacity 25 kg With captive guide rail on one side For screw-on assembly Integrated self-closing feature, double stop and roll-out prevention Automatic tolerance compensation ± 1 mm Steel powder-coated white or brown Drawer Min. cabinet Extension loss Hole spacing mm Order no. PU length mm depth mm EL mm b1 b2 b3 b4 white brown 250 253 69 64 - - - 1 061 611-1/20 sets 300 303 69 96 - - - 1 058 344-1/20 sets 350 353 69 96 64 - - 1 058 345 1 075 324 1/20 sets 400 403 69 96 128 - - 1 058 346 1 067 544 1/20 sets 450 453 79 96 128 32-1 058 347 1 067 545 1/20 sets 500 503 86 96 128 64 32 1 058 348 1 067 546 1/20 sets 550 553 94 96 128 128-1 058 349 1 078 799 1/20 sets 600 603 104 96 128 128-1 058 350 1 078 800 1/20 sets 50 Cabinet front edge Drawer length Cabinet front edge ø3,5 ø6,3 min.3,5 30 min.2,5 min.1,5 up to 20 EL 9 37 128 b1 b2 b3 b4 Min. cabinet depth = minimum number of screw-fixing positions Assembly min. Double stop engages the extension in the front position 12,5 ±1 12,5 11 35 ø3,5 ø3,5 ø6,3 Dimensions mm Order no. PU ø 6,3 x 10,5 0 051 264 200 ø 6,3 x 14 0 051 265 200 ø 3,5 x 12 9 079 791 200 ø 3,5 x 0 071 925 200 Processing technology see group 2 5.4.50 Roller runners www.hettich.com

Part-extension runner for wooden drawers Roller runner FR 602 Load capacity 35 kg With captive guide rail on one side For screw-on assembly Integrated self-closing feature, double stop and roll-out prevention Automatic tolerance compensation + 2 mm Steel powder-coated white or brown Drawer Min. cabinet Extension loss Hole spacing mm Order no. PU length mm depth mm EL mm b1 b2 b3 white brown 250 253 74 - - - 0 041 657-1/20 sets 300 303 74 96 - - 0 041 659-1/20 sets 350 353 74 96 64-0 041 661 0 041 660 1/20 sets 400 403 74 96 96-0 041 663 0 041 662 1/20 sets 450 453 87 96 128-0 041 665 0 041 664 1/20 sets 500 503 87 96 128 96 0 041 667 0 041 666 1/20 sets 550 553 102 96 128 128 0 041 669 0 041 668 1/20 sets 600 603 102 96 128 128 0 041 671 0 041 670 1/20 sets 650 653 112 224 224-0 041 673-1/20 sets 700 703 122 224 256-0 041 675-1/20 sets 750 753 137 224 256-0 041 677-1/20 sets 800 803 137 224 256 128 0 041 679-1/20 sets 50 Cabinet front edge Drawer length Cabinet front edge ø3,5 ø6,3 min.3,5 30 min.2,5 up to 20 EL 9 min.1,5 min. 37 128 b1 b2 b3 Min. cabinet depth = minimum number of screw-fixing positions Assembly 15 11 12,5 +2 12,5 33 Double stop engages the extension in the front position ø3,5 ø3,5 ø6,3 Dimensions mm Order no. PU ø 6,3 x 10,5 0 051 264 200 ø 6,3 x 14 0 051 265 200 ø 3,5 x 12 9 079 791 200 ø 3,5 x 0 071 925 200 Processing technology see group 2 Roller runners 5.4.51

Over-extension runner for wooden drawers Roller runner FR 6142 Load capacity 50 kg Two-sided captive guide rail For screw-on assembly Integrated self-closing feature Automatic tolerance compensation + 2 mm Steel powder-coated white or brown Safety catch and lockable centre runner Drawer Min. cabinet Over-extension Hole spacing mm Order no. PU length mm depth mm OE mm b1 b2 b3 b4 white brown 250 255 10 - - - - 0 041 633-1/4 sets 300 305 15 96 - - - 0 041 635-1/4 sets 350 355 15 96 64 - - 0 041 637 0 041 636 1/4 sets 400 405 30 96 96 - - 0 041 639 0 041 638 1/4 sets 450 455 30 96 128 - - 0 041 641 0 041 640 1/4 sets 500 505 30 96 128 64 32 0 041 643 0 041 642 1/4 sets 550 555 30 96 128 128-0 041 645 0 041 644 1/4 sets 600 605 30 96 128 128-0 041 647 0 041 646 1/4 sets 650 655 30 224 224 - - 0 041 649-1/4 sets 700 705 30 224 256 - - 0 041 651-1/4 sets 750 755 30 224 256 - - 0 041 653-1/4 sets 800 805 30 224 256 128-0 041 655-1/4 sets Cabinet front edge ø3,5 ø6,3 50 Cabinet front edge Drawer length min.3,5 30 9 min.2,5 OE 37 128 b1 b2 b3 b4 Min. cabinet depth min.1,5 = minimum number of screw-fixing positions Assembly 12,5 +1 12,5 +1 2 min.48 43 60 1 3 ø3,5 ø3,5 ø6,3 Centre runner Press safety catch into centre runner Dimensions mm Order no. PU ø 6,3 x 10,5 0 051 264 200 ø 6,3 x 14 0 051 265 200 ø 3,5 x 12 9 079 791 200 ø 3,5 x 0 071 925 200 Processing technology see group 2 5.4.52 Roller runners www.hettich.com

Part-extension runner for wooden drawers Roller runner FR 1105 Load capacity 80-100 kg For screw-on assembly Integrated self-closing feature, double stop and roll-out prevention Automatic tolerance compensation + 1 mm Steel, bright galvanised Drawer Min. cabinet Load capacity Extension loss Hole spacing mm Order no. PU length mm depth mm kg EL mm b1 b2 b3 b4 400 405 100 89 0 0 - - 0 030 273 1 set 450 455 100 89 192 192 - - 0 030 274 1 set 500 505 100 89 0 128 0,0-0 030 275 1 set 550 555 100 89 0 0 0,0-0 030 276 1 set 600 605 90 99 192 0 192,0-0 030 277 1 set 650 655 90 99 192 192 201,5-0 030 278 1 set 700 705 80 119 224 192 219,5-0 030 279 1 set 750 755 80 119 224 224 237,5-0 030 280 1 set 800 805 80 119 256 224 255,5-0 030 281 1 set 850 855 80 119 192 192 192,0 204,5 0 030 282 1 set 900 905 80 134 288 288 259,5-0 030 283 1 set 950 955 80 134 320 256 309,5-0 030 284 1 set 1000 1005 80 134 352 224 359,5-0 030 285 1 set Cabinet front edge Cabinet front edge 34 25 Drawer length ø4 ø6,3 9 EL 34 b1 b2 b3 Min. cabinet depth = minimum number of screw-fixing positions b4 min. 20 Assembly 9 12,5 min. 20 17 +0,5 17 +0,5 32 Double stop engages the extension in the front position ø4 ø4 ø6,3 Dimensions mm Order no. PU ø 6,3 x 11 0 047 451 200 ø 6,3 x 14 0 047 452 200 ø 4,0 x 0 010 085 200 Processing technology see group 2 Roller runners 5.4.53

Accessories for roller runners Central locking Central locking system for wooden drawers with roller runner FR 302/402 or 602 Barrel Z23 see group 7 Article Order no. PU Locking bar with 5 adjustable pins 0 051 500 1 Cylinder cam lock including rosette 0 013 337 1 Anti-tilt block for wooden drawers 0 040 227 1/10 37 87 29 32 18,5 18,5 ø19 min. 128 1000 Roller runner system FR 302/402/602 20 X = min. 29 19 ø7 12,5 ±1 min. 128 X+6 11 20 10 7 7 5.4.54 Roller runners www.hettich.com

Accessories for roller runners Spacers/distance rail for side clearance For drawers positioned behind doors The spacers/distance rail bridge the door/hinge protrusion For larger clearances several discs can be clipped together White plastic Article Distance Order no. PU mm Spacers 3 0 033 681 1/100 4 0 033 682 1/100 5 0 033 683 1/100 Distance rail 25 0 013 952 1 485 25 50 Roller runners 5.4.55

Accessories for roller runners Stop attachment For 5 mm hole diameter Transparent plastic Stop attachment For 6 mm hole diameter Plastic ø8 ø8 1,5 7 ø6 Order no. PU 9 079 298 1/1000 1,5 5,5 ø5 Finish Order no. PU white 0 025 048 1/1000 brown 0 021 154 1/1000 beige 0 047 353 1/1000 Stop attachment ø 8 mm, self-adhesive Transparent plastic Bracket For fixing drawer bottoms and rear panels White plastic 10,7 15 4,7 Order no. PU 0 072 120 50 0 046 695 1000 Order no. PU 0 079 438 1/200 Front panel fitting For two-dimensional adjustment of fronts on 4-sided drawers For knocking into the drawer fronts White plastic ø5 ± ± ø20 10 Use ø 4 mm countersunk screws to fix the front panel fitting. Order no. PU 0 071 833 1/200 Screw length = profile thickness + 10 mm fitting thickness After adjustment, the front panel must be secured by means of one additional countersunk screw. 5.4.56 Roller runners www.hettich.com

i Range summary/technical comparison 5.5 Drawer runners for special applications Quadro for writing tables KA 3434 Keyboard tray Double-Ender Page number 5.5.2 5.5.3 5.5.4 Brief description Part-extension with Part-extension with Full-extension for drawers locating catch locating catch which extend in both directions, with integrated dampened closure mechanism Load capacity 25 kg 20 kg 25 kg Runner lengths - 300-550 400-800 mm Quadro sliding panel Quadro sliding panel Pull-out system for pantry units Page number 5.5.5 5.5.6-5.5.7 5.5.8 Brief description Part-extension Part-extension Full-extension with optional dampening Load capacity 40 kg 50 kg 120-150 kg Runner lengths - 400-1000 mm 400-1000 mm Summary of drawer runners for special applications 5.5.1

Partial-extension for writing tables Quadro 25 Load capacity 25 kg Integrated locating catch Push the shelf panel onto the rear hooks and screw through brackets at the front Galvanized steel Order no. PU 0 056 014 1 set Example 1 Free space, e.g. for espagnolette lock 10 ø6 9,5 Cabinet front edge 388 14 Min. installation depth 37 320 364 Panel depth 84 Min. installation depth 388 37 320 378 Panel depth 84 Example 2 Min. installation depth 355 37 288 345 Panel depth 68 Assembly 27 min. 5 ø6 12 9,5 30,5 22 Locating catch ø3,5 ø6,3 Fixing screws Dimensions mm Order no. PU ø 6,3 x 11 0 047 451 200 ø 6,3 x 14 0 047 452 200 ø 3,5 x 12 9 079 791 200 ø 3,5 x 0 071 925 200 5.5.2 Drawer runners for special applications www.hettich.com

Partial-extension for keyboards Ball bearing runner KA 3434 Load capacity 20 kg Precision partial-extension runner with locating catch and roll-out prevention For keyboard trays, drawers and pull-outs Variable installation height 62,5 to 105,5 mm via 5 slot positions Galvanized steel, blue passivated! Nominal length Min. cabinet depth Extension loss Hole spacing mm Order no. PU mm mm EL mm b1 C 300 310 103 213,0 108,0 0 077 800 1 set 350 360 1 263,5 158,5 0077801 1 set 400 410 128 314,5 184,0 0077802 1 set 450 460 141 365,0 209,5 0 077 803 1 set 500 515 154 4,0 260,5 0 077 804 1 set 550 565 7 4,0 311,0 0 077 805 1 set Cabinet front edge 40 25 b1 71,5 C EL 25 Nominal length ø4 Min. cabinet depth 40 25,5 27 12,5 ø4 105,5 95,5 84,5 73,5 62,5 24 35 38 25 30 8,5 ø4,5 14,5 Assembly Fixing screws 9,8 7 18 ø4 Dimensions mm Order no. PU ø 4 x 0 010 085 200 Drawer runners for special applications 5.5.3

Full-extension for drawers which extend in both directions Double-Ender Load capacity 25 kg Face-mounted drawer fronts Integrated dampening system Silent System Drawer widths up to 900 mm Innovative drawer solution for serving hatches, connecting partitions or kitchen blocks Powder-coated steel, silver Depth mm Order no. PU 400-480 9 080 298 1 set 480-560 9 080 299 1 set 560-640 9 080 300 1 set 640-720 9 080 301 1 set 720-800 9 080 302 1 set Cabinet hole positions X 96 ø5 x 12 X 96 Y 96 X T Y 22 96 X LM 22 LH Depth mm T mm Y mm LM mm 400-480 400-479 110 450-600 480-560 480-559 190 450-680 560-640 560-639 270 450-760 640-720 640-719 350 450-840 720-800 720-800 430 450-920 LH = min. 111/max. 240 X = (T Y 192) / 2 Drawer hole positions Z Z C OA 47 LH BH ø2x10 LH FH SA LM FB SA UA FB = LM + (2 x SA) FH = LH + OA + UA BH= UA + 50 C = min. 0,5/max. 3 Z = SA + 25 10 ST = = 11 LH 72 297 193 10 29 = = 32 8,5 SB 1,5 ø5 x 12 SB = LM 77 SH = LH 23 ST = T + (2 x C) 96 96 Y SH 90 90 5.5.4 Drawer runners for special applications www.hettich.com

Part-extension runner for sliding panels Quadro 40 Load capacity 40 kg For pull-out panels, sample walls and displays which are vertically mounted between two Quadro drawer runners Integrated pull-out stop Galvanized steel Order no. PU 0 028 155 1 set Max. extension 5 Max. sliding panel depth 685 Min. sliding panel depth 520 250 Cabinet front edge 260 Assembly note The extension loss of 189 mm can be reduced by 90 mm if the sliding panel is shortened by this amount at the back. The maximum installation depth is 595 mm in this case. Use M4 screws to fasten the sliding panel to the Quadro runners. M4 M4 28 128 128 128 10 250 48 32 Extension loss Cut off max. min. 99 90 Extension loss 189 18,75 14 7 14,5 + 0,3 H 14,5 + 0,3 18,75 14 7 Drawer runners for special applications 5.5.5

Part-extension runner for roll-out cabinets Quadro 50 Load capacity 50 kg For ceiling and/or floor assembly Suitable for roll-out cabinets in living areas and kitchens, or pharmacies and medical practices Mounting plates fixed with through-bolts Galvanized steel Roll-out runner Installation Hole spacing mm Order no. PU length mm a1 a2 a3 a4 a5 a6 400 0 128-224 - - 0 047 485 1 450 0 0-256 - - 0 047 486 1 500 128 128 128 0 0-0 047 487 1 550 128 0 128 0 0-0 047 488 1 600 0 0 128 192 192-0 047 489 1 650 0 0 0 192 192-0 047 490 1 700 0 0 0 224 224-0 047 491 1 750 192 192 192 0 0 0 0 047 492 1 800 192 224 192 0 192 0 0 047 493 1 850 224 224 224 192 192 192 0 047 494 1 900 224 224 224 192 192 192 0 047 495 1 950 224 224 224 224 224 224 0 047 496 1 1000 224 224 224 224 224 224 0 047 497 1 Top guide rail Length Hole spacing mm Order no. PU mm b1 b2 b3 b4 390 95 95 64-0 047 498 1 440 120 120 64-0 047 499 1 490 145 145 64-0 047 500 1 540 170 170 64-0 047 501 1 590 195 195 64-0 047 502 1 640 108 224 108 64 0 047 503 1 690 133 224 133 64 0 047 504 1 740 158 224 158 64 0 047 505 1 790 183 224 183 64 0 047 506 1 840 208 224 208 64 0 047 507 1 890 233 224 233 64 0 047 508 1 940 258 224 258 64 0 047 509 1 990 283 224 283 64 0 047 510 1 Roller unit for upper guide rail Order no. PU 0 047 511 1 Ceiling/floor assembly Floor assembly 56,5 45 M6 32 For optimal stability install a set of runners both at the top and bottom! (Load capacity 50 kg) 45 M6 32 25 Top guide rail Height adjustment via tolerance plate 56,5 32 Load capacity 75 kg Attention: Replace countersunk screws with ø 4.5 mm pan-head screws when using the height adjustment. Assembly accessories/drilling jigs, see group 2 5.5.6 Drawer runners for special applications www.hettich.com

Part-extension runner for roll-out cabinets Quadro 50 Load capacity 50 kg Ceiling/floor assembly Cabinet front edge 37 44 a1 a2 a3 a6 a5 a4 90 Installation length M6 Floor assembly with top guide rail Installation length Cabinet front edge 37 64 b1 b2 b3 44 b4 a6 a5 a4 90 37 a1 a2 a3 M6 Drawer runners for special applications 5.5.7

Differential full-extension for pantry units of wooden construction Load capacity 120-150 kg For flexible widths (from 110 mm) and heights Automatic top guide tolerance compensation Optional dampening Silent System Steel, white, zinc-plated from 600 mm length Length Min. cabinet depth Load capacity Order no. PU mm mm kg 390 400 150 0 048 263 1 490 500 150 0 048 265 1 530 540 150 0 048 266 1 600 610 150 0 048 267 1 700 710 120 0 048 268 1 800 810 120 0 048 269 1 900 910 120 0 048 271 1 1000 1010 120 0 048 273 1 Dampened closure Silent System 0 044 831 1 Assembly Assembly of top cabinet rail/ Dampened closure Silent System Min. cabinet depth 29 32 128 32 40 37-45 15 32 32 32 24 47 Assembly of top extension rail 40 224 A B C Assembly of bottom extension rail 88 ø6 Through-holes 56,5 15 102 D E F Assembly of bottom cabinet rail 30 5 24 G 30 Drawer bottom must be reinforced for attaching the pull-out! Length Hole spacing mm mm A B C D E F G 390 96 - - 202 - - 310 490 0 - - 265 - - 410 530 224 - - 321 - - 450 600 224 - - 402 51-520 700 224 0-238 264 51 620 800 224 224-288 314 51 720 900 224 224 0 338 364 51 820 1000 224 224 0 388 277 70 920 5.5.8 Drawer runners for special applications www.hettich.com

i General information pertaining to drawer and runner systems Range of application Hettich drawer and runner systems are suitable for domestic and commercial furniture applications in living and bed rooms, kitchens, bathrooms and offices. Load Capacity and pull-out prevention The load capacity (according to DIN EN 15338) shown in the catalogue refers to the empty weight of the drawer including contents in kg. All Hettich drawer systems have a lift-up and pull-out prevention and meet the requirements of the stop position within a test frame according to DIN EN 15338. Depending on the appropriate installation the drawer and runner systems are suitable for furniture according to DIN 14749. The maximum drawer front height depends in particular on the material, the drawer measurements and the runner system. For further information please contact your Hettich representative. Corrosion testing Hettich drawer and runner systems meet corrosion requirements according to DIN EN 15338, 72 hour condensation water testing according to EN 6720. Additional information Using a chipboard quality - with reference to the screw pull-out resistance according to DIN EN 320 (>1.000 N) we recommend an installation with screws according to the attachment illustrations in the catalogue. Modes of attachment which diverge from the specification need to be verified by the furniture manufacturer. 5.5.9

Range summary/technical comparison 5.6 Table extension slides i Table extension slides for frame profiles Trimanis Basic Trimanis Advanced Trimanis Alu square Page number 5.6.2-5.6.3 5.6.4-5.6.5 5.6.6 Installation length 700/1350 mm 850/1350 mm 1310/60 mm Number of extension leaves 1/2 1/2 1/2 Width of extension leaf max. 500 mm max. 500 mm max. 600/500 mm Load capacity max. 60/90 kg max. 60 kg max. 90 kg Material galvanized steel galvanized steel aluminium silver/dark anodised Table extension slides for tables with fixed lower frame Page number Trimanis Combi 5.6.7-5.6.9 Trimanis Combi Alu 5.6.10 Installation length 720/980/1200/1500 mm 980/1200 mm Number of extension leaves 2/3/4/5 3/4 Width of extension leaf max. 500 mm max. 500 mm Load capacity max. 90/100 kg max. 100 kg Material galvanized steel aluminium silver anodised 5.6.0 Range summary of table extension slides www.hettich.com

i Range summary/technical comparison 5.6 Table extension slides Table extension slides for tables with extension to one side Trimanis Frontslide Trimanis Frontslide Alu square Trimanis Frontslide Alu Page number 5.6.11 5.6.12-5.6.13 5.6.14 Installation length 1300/1800 mm 1200/1800 mm 1315/1815 mm Number of extension leaves 2 1/2 2 Width of extension leaf max. 500 mm max. 600/500 mm max. 500 mm Load capacity max. 90 kg max. 90 kg max. 90 kg Material galvanized steel aluminium silver/dark anodised aluminium silver anodised Table extension slides Folding leaf fitting Page number Trimanis Classic 5.6.15-5.6.18 5.6.19 Installation length 450/740/650 mm - Number of extension leaves 1/2/3/4 1 Width of extension leaf max. 600/500 mm max. 500/600 mm Load capacity max. 60/90 kg - Material galvanized steel galvanized steel Accessories Corner bracket/reinforcing bar/ plate with support pin Page 5.6.20 Range summary of table extension slides 5.6.1

Table extension slide for frame profiles Trimanis Basic Table extension slide for 1 extension leaf with max. leaf width of 500 mm For installation in open frame systems With synchronized control: for simultaneously opening and closing both table tops (only Trimanis Basic synchron) Installation length 700 mm Max. load capacity 60 kg Can be combined with folding leaf fitting, see page 5.6.19 Galvanized steel 31 ±0,5 40 ±0,5 Set contains: 1 pair of table extension slides, standard or synchronous 8 dowels/bushes 4 locking hooks 13,5 ±0,5 Article Order no. PU Trimanis Basic standard 9 079 738 1 set Trimanis Basic synchron 9 079 660 1 set 27 112 112 32 700 120 20 ø5,1 ø5,1 ø7,5 y 500 min. 600 min. 10 1 extension leaf y x 500 mm! 5.6.2 Table extension slides www.hettich.com

Table extension slide for frame profiles Trimanis Basic Table extension slide for 2 extension leaves with max. leaf width of 500 mm For installation in open frame systems With synchronized control: for simultaneously opening and closing both table tops (only Trimanis Basic synchron) Integrated rope brake (only Trimanis Basic synchron) Installation length 1350 mm Max. load capacity 90 kg Galvanized steel 36 ±0,5 49 ±0,5 Set contains: 1 pair of table extension slides, standard or synchronous 12 dowels/bushes 6 tension jacks (only Trimanis Basic standard) Article Order no. PU Trimanis Basic standard 9 079 739 1 set Trimanis Basic synchron 9 079 663 1 set 47 112 112 32 32 112 112 1350 370 10 5 20 6 x 55 ø5,1 y 500 min. 10 min. 600 2 extension leaves y x 500 mm Table extension slides 5.6.3

Table extension slide for frame profiles Trimanis Advanced Table extension slide for 1 extension leaf with max. leaf width of 500 mm For installation in closed frame systems With synchronized control (for simultaneously opening and closing both table tops) Integrated rope brake Installation length 850 mm Max. load capacity 60 kg Can be combined with folding leaf fitting, see page 5.6.19 Galvanized steel Set contains: 1 pair of table extension slides 8 dowels/bushes 36,6 ±0,5 22 50 ±0,5 Order no. PU 9 079 740 1 set 150 11 4x32 850 ø5,1 43 112 112 32 y 500 min. 600 1 extension leaf y x 500 mm 5.6.4 Table extension slides www.hettich.com

Table extension slide for frame profiles Trimanis Advanced Table extension slide for 2 extension leaves with max. leaf width of 500 mm For installation in closed frame systems With synchronized control (for simultaneously opening and closing both table tops) Integrated rope brake Installation length 1350 mm Max. load capacity 60 kg Can be combined with folding leaf fitting, see page 5.6.19 Galvanized steel Set contains: 1 pair of table extension slides 12 dowels/bushes 36,6 ±0,5 49 ±0,5 Order no. PU 9 079 741 1 set 150 11 4x32 1350 ø5,1 43 112 112 32 32 112 112 y 500 min. 10 min. 600 2 extension leaves y x 500 mm Table extension slides 5.6.5

Table extension slide for frame profiles Trimanis Alu square High-quality aluminium table extension slide for one or two extension leaves with a leaf width of max. 600/500 mm Table extension slide acts as frame profile With synchronized control: for simultaneously opening and closing both table tops Integrated rope brake 58,5 Max. load capacity 90 kg ±0,5 Anodised aluminium ±0,3 52 M8 Set contains: 1 pair of table extension slides 8 or 12 dowels/bushes 28 Installation length Number of extension leaves Width of extension leaves Order no./finish PU mm mm silver anodised dark anodised 1310 1 600 9 079 742 9 079 744 1 set 60 2 500 9 079 746 9 079 747 1 set Installation length 1310 mm 10 ø11 24 448 178 650 12 64 872 356 14 40 28 448 ø14 ø10 ø6,5 1300 1310 600 min. 10 Installation length 60 mm 10 min. 700 1 extension leaf y x 600 mm 27 ø11 448 350 825 12 64 12 700 14 384 28 448 ø14 ø10 ø6,5 50 60 500 min. 10 min. 600 2 extension leaves y x 500 mm 5.6.6 Table extension slides www.hettich.com

Table extension slide for tables with fixed lower frame Trimanis Combi Table extension slide for 2 extension leaves with max. leaf width of 500 mm Installation length 720 mm Integrated rope brake Max. load capacity 90 kg Galvanized steel 81 ±0,5 Set contains: 1 pair of table extension slides 12 dowels/bushes 57 Order no. PU 9 079 772 1 set 450 720 ø5,1 7x55 20 20 60 60 y 500 min. 10 min. 600 2 extension leaves y x 500 mm Table extension slides 5.6.7

Table extension slide for tables with fixed lower frame Trimanis Combi Table extension slide for 3 extension leaves with max. leaf width of 500 mm Installation length 980 mm Integrated rope brake Max. load capacity 90 kg Galvanized steel 81 ±0,5 Set contains: 1 pair of table extension slides dowels/bushes 73 Order no. PU 9 079 773 1 set 650 980 ø5,1 7x55 2020 60 60 60 y 500 min. 10 min. 600 3 extension leaves y x 500 mm 5.6.8 Table extension slides www.hettich.com

Table extension slide for tables with fixed lower frame Trimanis Combi Table extension slide for 4 or 5 extension leaves with max. leaf width of 500 mm Integrated rope brake Max. load capacity 100 kg Galvanized steel 87,4 ±0,5 Set contains: 1 pair of table extension slides 20 or 24 dowels/bushes 82 Installation length mm Number of extension leaves Order no. PU 1200 4 9 079 774 1 set 1500 5 9 079 775 1 set Installation length 1200 mm 900 1200 ø5,1 7x55 2020 60 60 60 y 500 min. 10 min. 600 4 extension leaves y x 500 mm Installation length 1500 mm 900 1500 ø5,1 7x552020 60 60 60 60 y 500 min. 10 min. 600 5 extension leaves y x 500 mm Table extension slides 5.6.9

Table extension slide for tables with fixed lower frame Trimanis Combi Alu High-quality aluminium table extension slide for three or four extension leaves with a leaf width of max. 500 mm Integrated rope brake Max. load capacity 100 kg Aluminium silver anodised 88,5 ±0,5 Set contains: 1 pair of table extension slides or 20 dowels/bushes 82 Installation length mm Number of extension leaves Order no. PU 980 3 9 079 748 1 set 1200 4 9 079 750 1 set Installation length 980 mm 4x100 20 ø5,1 980 60 60 60 y 500 min. 10 Installation length 1200 mm min. 600 3 extension leaves y x 500 mm 5x100 20 ø5,1 1200 60 60 60 y 500 min. 10 min. 600 4 extension leaves y x 500 mm 5.6.10 Table extension slides www.hettich.com

Table extension slide for tables with extension to one side Trimanis Frontslide Table extension slide for 2 extension leaves with max. leaf width of 500 mm Integrated rope brake Max. load capacity 90 kg Galvanized steel 41 ±0,5 Set contains: 1 pair of table extension slides 12 dowels/bushes 74,5 ±0,5 Installation length mm Order no. PU 1300 9 079 751 1 set 1800 9 079 753 1 set Installation length 1300 mm 43 112 112 32 32 112 112 32 ø5,1 1300 35 250 250 250 250 9,5 5 30 Installation length 1800 mm 43 112 112 3232 112 112 32 32 112 112 32 ø5,1 1800 35 6 x 250 5 9,5 30 y 500 min. 600 2 extension leaves y x 500 mm Table extension slides 5.6.11

Table extension slide for tables with extension to one side Trimanis Frontslide Alu square High-quality aluminium table extension slide for one or two extension leaves with a leaf width of max. 600/500 mm Can optionally be combined with Trimanis 2-leg frames With premounted angle connector Table extension slide acts as frame profile Integrated rope brake Max. load capacity 90 kg Anodised aluminium Set contains: 1 pair of table extension slides 8 or 12 dowels/bushes Installation length Number of extension leaves Width of extension leaves Order no./finish PU mm mm silver anodised dark anodised 1200 1 600 9 079 759 9 079 760 1 set 1800 2 500 9 079 762 9 079 763 1 set 100 5x200 ø5,3 Installation length 1200 mm 9,5 1200 100 8x200 ø5,3 Installation length 1800 mm 9,5 1800 ø5,3 77 48 1 11 26 52,5 ø8 600/ 500 30 56,5 43,5 48 5.6.12 Table extension slides www.hettich.com

Accessories for Trimanis Frontslide Alu Square Trimanis 2-leg frame High-quality aluminium frame with 2 legs Can be combined with Trimanis Frontslide Alu Anodised aluminium Set contains: 2 pcs 2-leg frames Fixing accessories Finish Order no. PU silver anodised 9 079 779 1 set dark anodised 9 079 780 1 set 1200 / 1800 13 755 50 x 50 900 755 50 50 900 Table extension slides 5.6.13

Table extension slide for tables with extension to one side Trimanis Frontslide Alu High-quality aluminium table extension slide for two extension leaves with a leaf width of max. 500 mm Table extension slide acts as frame profile Integrated rope brake Max. load capacity 90 kg Aluminium silver anodised 88 ±0,5 Set contains: 1 pair of table extension slides 12 dowels/bushes 73,2 Installation length mm Order no. PU 1315 9 079 765 1 set 1815 9 079 781 1 set Installation length 1315 mm 5x250 1290 1155 0 960 451 35 195 ø4,2 45 26 Installation length 1815 mm 5x350 1790 1515 300 1005 35 195 451 ø4,2 45 26 y 500 min. 10 min. 600 2 extension leaves y x 500 mm 5.6.14 Table extension slides www.hettich.com

Table extension slide for single telescopic extension Trimanis Classic Table extension slide for 1 extension leaf with max. leaf width of 600 mm For tables without frame structure Installation length 450 mm Max. load capacity 60 kg Galvanized steel 71 ±0,5 Set contains: 1 pair of table extension slides 8 dowels/bushes 4 tension jacks 40 ±0,5 Order no. PU 9 079 768 1 set 35 20 ø7,5 ø5,1 450 Table extension slides 5.6.15

Table extension slide for multiple telescopic extension Trimanis Classic Table extension slide for 2 extension leaves with max. leaf width of 500 mm For tables without frame structure Installation length 740 mm Max. load capacity 60 kg Galvanized steel 72 ±0,5 Set contains: 1 pair of table extension slides 12 dowels/bushes 6 tension jacks 1,50 50,5 ±0,5 Order no. PU 9 079 769 1 set 20 7x55 ø5,1 740 5.6. Table extension slides www.hettich.com

Table extension slide for multiple telescopic extension Trimanis Classic Table extension slide for 3 extension leaves with max. leaf width of 500 mm For tables without frame structure Installation length 740 mm Max. load capacity 90 kg Can optionally be combined with supporting leg Galvanized steel 86 ±0,5 Set contains: 1 pair of table extension slides dowels/bushes 8 tension jacks 1,5 50,5 ±0,5 Order no. PU 9 079 770 1 set Trimanis supporting leg Leg for central support of the table extension slide Secured to the table extension slide 100 640 ø19 M6 x 6 Order no. PU 9 079 782 1 60 665 20 7x55 740 Table extension slides 5.6.17

Table extension slide for multiple telescopic extension Trimanis Classic Trimanis Classic Table extension slide for 4 extension leaves with max. leaf width of 500 mm For tables without frame structure Installation length 650 mm Max. load capacity 90 kg Can optionally be combined with supporting leg Galvanized steel 100 ±0,5 Set contains: 1 pair of table extension slides 20 dowels/bushes 10 tension jacks 1,5 ±0,5 50,5 Order no. PU 9 079 771 1 set Trimanis supporting leg Leg for central support of the table extension slide Secured to the table extension slide 100 640 ø19 M6 x 6 Order no. PU 9 079 782 1 60 665 20 7x55 650 5.6.18 Table extension slides www.hettich.com

Accessories for table extension slide Trimanis Folding leaf fittings Retractable, for extension leaves with a width of 500 mm For use in combination with table extension slides with closed frame system or central leg Galvanized steel Set contains: 2 stop plates for extension leaf 2 bearings for turn bar 1 turn bar with closed frame system or central leg Order no. PU 9 079 783 1 set Functional principle Retractable, for inlaid panels with a width of 500-600 mm For use in combination with table extension slides with open frame system Galvanized steel, yellow passivated Set contains: 2 stop plates for inlaid panel left/right 2 rod bearings left/right Order no. PU 9 079 707 1 set Functional principle Table extension slides 5.6.19

Accessories for table extension slides Trimanis Corner bracket For connecting table leg and table frame profile Galvanized steel 8,5 15,6 11,3! 11,8 40 10,4 60 28 75 7 43 90 2 5 56 90 2 7 43 90 2 30 ca. 52 31 Height x Depth mm Order no. PU 40 x 43 9 079 776 32 60 x 56 9 079 777 75 x 43 9 079 778 Reinforcing bar for solid wood panels Application: to prevent warpage of thick, solid table tops Length: 700 mm Width: 40 mm Height: 20 mm Grey steel 5 10 40 20 700 Order no. PU 9 082 436 2 Plate with support pin For assembly of the extension leaf Chromated steel 9 38 27 38 Order no. 9 078 640 2 PU 5,5 5,5 27 ø5,3 2,6 42 5.6.20 Table extension slides www.hettich.com