BM Series Rotary Motors BM Series DC Brushless Rotary Servomotors Standard NEMA frame sizes Neodymium iron boron rare-earth magnets maximize performance Skewed stator with 8-pole design minimizes torque ripple and cogging for smooth velocity control over a greater speed range Optional IP65-level construction allows use in harsh environments, including washdown Choice of encoder/hall output or resolver feedback Optional brake, front shaft seal, and precision gear reducers High-Performance Design The BM series motors are Aerotech s high-performance DC brushless rotary motors. The motors feature neodymium iron boron magnets for maximum torque and acceleration in a small package. A skewed stator design and an eightpole rotor provide less torque ripple and smoother velocity. The BM series motors can reach speeds up to 1, and accelerations to 7, rad/sec for improved machine cycle times. Unlike DC brush-type servomotors, the BM series are brushless and maintenance free. This makes them ideal for critical applications where downtime cannot be tolerated. Application Flexibility The standard motor has a 1-line encoder (4-line count after quadrature), RS-4 line driver output with Hall effect device outputs for commutation, and MS connectors. Options include increased encoder resolution, encoders with amplified sine-wave output, resolver feedback, sealing for IP65 level protection, brakes, and gearboxes. Standard models can be delivered from stock and custom variations can be engineered to your requirements with minimal lead time. In addition, the BM series motors have very high power density resulting in high torque in a compact package. Optional IP65 sealing make these motors ideal for harsh environments such as machine tool and even in washdown applications such as food processing. Wide Torque Range The BM motor series covers a wide range of torque and package sizes. output torque ranges from.53 (75 ) to 3 (8 ), with peak torques to 94.4 (84 ). Standard frame sizes include NEMA 3, 34, 4, and IEC 14. This makes it easy to mount any motor to Aerotech s gearbox line with no adapter plates. These motors are well-suited to general purpose and high-end servo applications. All Aerotech motors are manufactured following ISO91 standards.
BM Series SPECIFICATIONS and DIMENSIONS NEMA3 Rotary Motors BM Series Motor Model Units BM75E BM13E BME S tall Torque,.53 (75) 1. (14) 1.41 () P eak Torque 1.41 ().5 (35) 3.5 (5) Maximum Speed Rated Speed 1, 8, 4, R ated Power w atts (hp) 1 (.8) 9 (.39) 45 (.6) Stall Current Torque Constant BEMF Constant /p / / / Volts k 8.5 6..6 8.8.9 6.3 4.5.16.. 31.1 7.1.14.. 8.6 / k 7. 5 18. 7 17. R esistance, 5 C ohms 1.. 1. 1 Inductance Rotor Moment of Inertia Maximum Acceleration Recommended Bus Voltage Motor Constant mh. 8 1. 8 1. 1 kg-m z-in-s o.5x1.7.9x1.13 rad/ s 7, VDC 16 / / Number of Poles P 8.6 8.3.1 15. 1.3x1.19 M otor Weight k g (lb) 1.1 (.5) 1.5 (3.3). (4.3) M ax Radial Load 89 () M ax Axial Load 89 () O perating Temperature C to 4 S torage Temperature C - to 85 Note: All Aerotech amplifiers are rated in amps peak; use torque constant in when sizing. p k.13 19.
BM Series SPECIFICATIONS and DIMENSIONS BM Series Rotary Motors NEMA34 Motor Model Units BM5E BM5E S tall Torque, 1.94 (75) 3.6 (51) P eak Torque 5. (7) 9. (1,75) Maximum Speed 8, 8, Rated Speed 4, 4, R ated Power w atts (hp) 59 (.8) 1,1 () Stall Current 18. 7.1 1.7 /.19.19 / 7.8 7.7 Torque Constant /.8.8 / 39.3 39. BEMF Constant Volts / k 3. 8 3. 6 R esistance, 5 C ohms 1. 1. 5 Inductance mh 1. 3. 8 Rotor Moment of Inertia Maximum Acceleration Recommended Bus Voltage Motor Constant kg-m z-in-s o 7.8x1.11 13.9x1. rad/ s 6, 65, VDC 16/3 16/3 / / Number of Poles P 8 8 M otor Weight k g (lb) 3.6 (8.) 5. (11.) M ax Radial Load 178 (4) 178 (4) M ax Axial Load 89 () 89 () O perating Temperature C to 4 Storage Temperature C - to 85 Note: All Aerotech amplifiers are rated in amps peak; use torque constant in when sizing. p k.18 5..7 39.
BM Series SPECIFICATIONS and DIMENSIONS NEMA4 Rotary Motors BM Series Motor Model Units BM8E BM14E S tall Torque, 5.5 (78) 9.6 (1365) P eak Torque 14. (,) 4. (3,4) Maximum Speed Rated Speed 6, 6, 3, 3, R ated Power w atts (hp) 1,4 (1.9),33 (3.1) Stall Current Torque Constant BEMF Constant / p / / / k 1.6 7.5.5 74..74 15. 18. 1.7.5 74..74 15. Volts / k 6. 6. R esistance, 5 C ohms 1.. 5 Inductance Rotor Moment of Inertia Maximum Acceleration Recommended Bus Voltage Motor Constant mh 3. 8 1. 7 kg-m z-in-s o 3.x1.4 56.x1.8 rad/ s 46, 4, VDC 3 3 / ew / ew Number of Poles P 8 8 M otor Weight k g (lb) 6.6 (14.5) 1.7 (3.5) M ax Radial Load (5) (5) M ax Axial Load 89 () 89 () Operating Temperature Storage Temperature Note: All Aerotech amplifiers are rated in amps peak; use torque constant in when sizing.4 58. C to 4 C - to 85. p k.7 98.
BM Series DIMENSIONS BM Series Rotary Motors IEC14 Motor Model Units BME BM34E BM45E S tall Torque, N -m () 14.7 (13) 3.7 (1) 3 (8) P eak Torque N -m () 43.9 (39) 7.8 (63) 94.4 (84) Maximum Speed Rated Speed,7,4 R ated Power w atts (hp) 3,8 (4.4) 5,73 (6.8) 6,789 (9.1) Stall Current Torque Constant BEMF Constant R esistance, 5 C, line-lin e Inductance, line-line Rotor Moment of Inertia Maximum Acceleration Recommended Bus Voltage / / / / Volts k hms 16.8 11.9.87 7.7 1. 1.9 7.8 19.7.85 7.5 1. 1.6 / 99. 37.1 6..85 7.5 1. 1.6 o.66.4.13 mh 4. 7. 1. 4 kg-m -s rad/ s.119.16.1.188.38.73 4,65 3,675 9,94 VDC 3 M otor Weight k g (lb) 16.3 (36.) 3.1 (51.) 9.9 (66.) Motor Constant / /.9 13.3 Number of Poles P 6 1.4 M ax Radial Load 668 (15) M ax Axial Load 3 (5) O perating Temperature C to 4 S torage Temperature C - to 85 Note: All Aerotech amplifiers are rated in amps peak; use torque constant in when sizing. p k. 83.
BM Series MOTOR and AMP PERFORMANCE BM75 and BA-16 (BM75+BA) 1.4 1. Cont (BM75+BA) 18 16 1. 14.8 1 1.6 8.4 6 4.. 1 3 4 5 Motor Speed () BM13 and BA-16 (BM13+BA).5 35 Cont (BM13+BA). 3 5 1. 15 1.5 5. 1 3 4 5 Motor Speed () Rotary Motors BM Series BM and BA-16 BM5 and BA-16 (BM+BA) 3. Cont (BM+BA) 4.5 35. 3 5 1. 15 1.5 5. 1 3 4 5 Motor Speed () (BM5+BA) 4.5 Cont (BM5+BA) 6 4. 3.5 5 3. 4.5. 3 1..5 1. 1 3 4 5 Motor Speed () BM5 and BA3-3 BM8 and BA3-3 7. (BM5+BA3) 6. Cont (BM5+BA3) 9 8 5. 7 4. 6 5 3. 4. 3 1. 1. 1 3 4 5 Motor Speed () (BM8+BA3) 16. 14 Cont (BM8+BA3) 14. 1 1. 1 8 8. 6. 6 4. 4.. 1 3 4 Motor Speed ()
BM Series MOTOR and AMP PERFORMANCE BM Series Rotary Motors BM14 and BA5-3 (BM14+BA5) 3. Cont (BM14+BA5) 5 5.. 15 15. 1 5. 5. 1 3 4 Motor Speed () BM and BA5-3 (BM+BA5) 5. Cont (BM+BA5) 45. 4 4. 35 35. 3 3. 5 5.. 15 15. 1 5. 5. 5 1 15 5 3 Motor Speed () BM34 and BA75-3 BM45 and BA1-3 (BM34+BA75) 8. 7 Cont (BM34+BA75) 7. 6 6. 5 5. 4 4. 3. 3. 1. 5 1 15 5 3 Motor Speed () (BM45+BA1) 1. 9. Cont (BM45+BA1) 8 8. 7 7. 6 6. 5 5. 4 4. 3 3.. 1. 5 1 15 5 3 Motor Speed ()
BM Series MOTOR and AMP PERFORMANCE BM75E 1.6 1.4 1. 1. 15.8 1.6.4 5.. 1 3 4 5 Motor Speed () BM13E.5 35. 3 5 1. 15 1.5 5. 1 3 4 5 Motor Speed () Rotary Motors BM Series BME BM5E 4. 3.5 5 3. 4.5. 3 1..5 1. 1 3 4 5 Motor Speed () 4.5 6 4. 3.5 5 3. 4.5. 3 1..5 1. 1 3 4 5 Motor Speed () BM5E BM8E 14 9. 1 8. 7. 1 6. 8 5. 4. 6 3. 4. 1.. 1 3 4 5 Motor Speed () 16. 14 14. 1 1. 1 8 8. 6. 6 4. 4.. 1 3 4 Motor Speed ()
BM Series MOTOR and AMP PERFORMANCE BM Series Rotary Motors BM14E 5.. 15 15. 1 5. 5. 1 3 4 Motor Speed () BME 5. 45. 4 4. 35 35. 3 3. 5 5.. 15 15. 1 5. 5. 5 1 15 5 3 Motor Speed () BM34E BM45E 8. 7 7. 6 6. 5 5. 4 4. 3. 3. 1. 5 1 15 5 3 Motor Speed () 1. 9 8 8. 7 6 6. 5 4. 4 3. 1. 5 1 15 5 3 Motor Speed ()
BM Series ORDERING INFORMATION Ordering Example BM 13 -MS -EH -X M otor Series Motor Torque () 75, 13,, 5, 5, 8, 14,, 34, 45 Standard motor/encoder = BM13E (MS connectors, E1H encoder) Connector Option MS Encoder Resolution with Hall Tracks E1H (std), E14H, E15H, E18H, EH, E5H, E5H Motor Options BK1, BK, BK3, BK4, BK5, NS, XX, VAC6 Brushless Rotary Servomotors BM75E NEMA 3 - Tcont =.5 (75) brushless motor, 15 in. integral cable with MS connectors, 1 line encoder with line driver output BM13E NEMA 3 - Tcont =.9 (13) brushless motor, 15 in. integral cable with MS connectors, 1 line encoder with line driver output BME NEMA 3 - Tcont = 1.4 () brushless motor, 15 in. integral cable with MS connectors, 1 line encoder with line driver output BM5E NEMA 34 - Tcont = 1.9 (6) brushless motor with MS connectors, 1 line encoder with line driver output BM5E NEMA 34 - Tcont = 3.6 (51) brushless motor with MS connectors, 1 line encoder with line driver output BM8E NEMA 4 - Tcont = 5.5 (78) brushless motor with MS connectors, 1 line encoder with line driver output BM14E NEMA 4 - Tcont = 9.6 (1365) brushless motor with MS connectors, 1 line encoder with line driver output BME IEC 14 metric shaft and flange, Tcont = 15 (13, ) brushless motor with MS connectors, 1 line encoder with line driver output BM34E IEC 14 metric shaft and flange, Tcont = 4 (1, 34 ) brushless motor with MS connectors, 1 line encoder with line driver output BM45E IEC 14 metric shaft and flange, Tcont = 3 (8, 45 ) brushless motor with MS connectors, 1 line encoder with line driver output Rotary Motors BM Series Connectors -MS Feedback Options -E1H -E14H -E15H -E18H -EH -E5H -E5H -RS MS Conectors for feedback and motor power (standard) Encoder, A quad B with marker, 5 VDC, 1 line, line-driver output Encoder, A quad B with marker, 5 VDC, 14 line, line-driver output Encoder, A quad B with marker, 5 VDC, 15 line, line-driver output Encoder, A quad B with marker, 5 VDC, 18 line, line-driver output Encoder, A quad B with marker, 5 VDC, line, line-driver output Encoder, A quad B with marker, 5 VDC, 5 line, line-driver output (brake option not available on BM75, BM13) Encoder, A quad B with marker, 5 VDC, 5 line, line-driver output (brake option not available on BM75, BM13) Single speed brushless resolver (replaces encoder) Options (Brushless Rotary Motors) -BK1 Brake, Holding torque =.8 (11), 4 VDC,.3 A for BM75, BM13 and BM -BK Brake, Holding torque = 1.7 (4), 4 VDC,.4 A for BM5, BM5 -BK3 Brake, Holding torque = 5.6 (8), 4 VDC,.7 A for BM8, BM14 -BK4 Brake, Holding torque = 7.5 (16), 4 VDC,.7 A for BM8, BM14 -BK5 Brake, Holding torque = 4.7 (36), 4 VDC,.7 A for BM, BM34, BM45 -NS IP65 rated Nitrile front shaft seal (not available for BM75, BM13, BM) -XX XX = integral cable length in feet for NEMA 3 motors only -VAC6 Vacuum prep for up to 1-6 torr Example: 1. Motor with line encoder and nitrile shaft seal: BM13-MS-EH-NS. Motor with 1 line encoder and 5 ft. integral cable: BM75-MS-E1H Accessories MCM1-3 MCM-3 MCF-3 Connector, MS motor power mate (BM, BM34, BM45) Connector, MS motor power mate (BM75, BM13, BM, BM5, BM5, BM8, BM14) Connector, MS motor feedback mate for all BM motors