Standard Equipment Optional Equipment Robex 250L-7 ISO standard cab ll-weather steel cab with all-around visibility Safety glass windows Rise-up type windshield wiper Sliding fold-in front window Sliding side window Lockable door Hot & cool box ccessory box & sh-tray omputer ided Power Optimization (New PO) system 2-power mode, 3-work mode, 2-user mode uto deceleration & one touch deceleration system uto warm up system uto overheat prevention system Heater & Defroster (7,500kcal/hr, 30,000TU/hr) Self diagnostic system Starting id (air grid heater), cold weather entralized monitoring LD display Engine speed lock & Error code Gauges Fuel level gauge Engine coolant temperature gauge Hyd. oil temperature gauge Warning Fuel level heck Engine & PU Engine oil pressure Engine coolant temperature Hyd. oil temperature Low battery ir cleaner clogging Indicator Power max Preheat & Engine warming-up One touch decel Door and cab locks, one key m/fm radio and US player Remote control switch Two outside rearview mirrors Fully adjustable suspension seat with seat belt Slidable joystic, pilot-operated onsole box tilting system(lh.) Three front working lights Electric horn atteries (2 x 12V x 100 H) attery master switch Removable clean out screen for Hyd. oil cooler utomatic swing brake Removable reservoir tank Fuel pre-filter oom holding system rm holding system ounterweight (4600, 10140 ) Mono boom (5.85 m, 19 2 ) rm (3.05 m, 10 0 ) Track shoes (600 mm, 24 ) Track rail guard Fuel warmer ir-conditioner (5000 kcal/hr, 20000 TU/hr) FT(Full utomatic Temperature ontrol) Sun visor for cabin inside Fuel filler pump (35 /min, 9.5 USgpm) eacon lamp Safety lock valve for boom cylinder with overload warning device Safety lock valve for arm cylinder Single acting piping kit (breaker, etc) Double acting piping kit (cramshell, etc) ccumulator, work equipment lowering 12 volt power outlet (24V D to 12V D converter) Electric transducer Travel alarm Various optional rms Super short arm (2.10m, 6 11 ) Short arm (2.50m, 8 2 ) Long arm (3.60m, 11 10 ) Various optional uckets (SE heaped) Standard bucket (1.08 m 3, 1.41 yd 3 ) Narrow bucket (0.60 m 3, 0.78 yd 3 ) Narrow bucket (0.79 m 3, 1.03 yd 3 ) Narrow bucket (1.03 m 3, 1.35 yd 3 ) Light duty bucket (1.50 m 3, 1.96 yd 3 ) Heavy duty bucket (1.07 m 3, 1.40 yd 3 ) Heavy duty bucket (1.15 m 3, 1.50 yd 3 ) Heavy duty bucket (1.27 m 3, 1.66 yd 3 ) Heavy duty bucket (1.46 m 3, 1.91 yd 3 ) Rock-Heavy duty bucket (1.16 m 3, 1.52 yd 3 ) abin FOPS/FOG(ISO/DIS 10262) abin Roof-cover Transparent type abin lights Engine emergency control cable Track shoes Triple grousers shoe (700mm, 28 ) Triple grousers shoe (800mm, 32 ) Triple grousers shoe (900mm, 36 ) Lower frame under cover Tool kit Operator suit Special cowl Low noise kit Engine emergency control cable Pre-heating system Seat djustable air suspension seat djustable air suspension seat with heater Mechanical suspension seat with heater Pattern changer (2pattern) Some of the photos may include optional equipment. 250L-7 RWLER EXVTOR pplied Tier 3 Engine Standard and optional equipment may vary. ontact your Hyundai dealer for more information. The machine shown may vary according to International standards. ll US measurement rounded off to nearest pounds or inchs. PLESE ONTT www.hyundai-ce.com 2009. 2003. 106 Rev 1. 2
Robex 250L-7 uilt for Maximum Power, Performance, Reliability. new chapter in construction equipment has now begun. Making the dream a reality. Some of the photos may include optional equipment. HYUNDI ONSTRUTION EQUIPMENT 02 / 03
Robex 250L-7 Operator s omfort is Foremost. Wide ab Exceeds Industry Standards. Technology in ab Design Visibility. Even more visibility than before, for safer, more efficient operating. Excellent Ventilation. Ventilation has been improved by the addition of the larger fresh air intake system, and by providing additional air flow throughout the cab.. Sliding front and side windows provide improved ventilation.. large sunroof offers upward visibility and additional ventilation. omfortable Operator Environment. The control levers and seat can be adjusted to provide maximum operator comfort.. The seat is fully adjustable for optimum operating position, reducing operator fatigue.. onsole boxes slide forward and backward for improved accessibility.. The proportional pressure controls reduce unnecessary exertion while ensuring precise operation.. Large windows allow excellent visibility in all directions. 1 Low Noise Design. The Robex new 7 series was designed with low operation noise in mind.. Hyundai engineering helps to keep interior and exterior noise levels to a minimum.. The cab's noise levels have been additionally reduced by improving the door seals for the cab and engine compartments.. n insulated diesel engine compartment with sound-damping material also reduces noise. 2 3 1 Wide, omfortable Operating Space 2 Steel over Sunroof 3 Dial Type Engine Speed Switch and / Key Switch Radio/ US Player & Remote ontrol Switch HYUNDI ONSTRUTION EQUIPMENT 04 / 05
Robex 250L-7 Improved Intelligent Display Instrument Panel is installed in front of RH console box. It is easy to check all critical systems with easy-to-read indicators. Minimization of Shock and Vibration through ab Mounting System The application of Viscous Mounting to the cabin support provides the operator with a much improved ride. The operator work efficiency will increase as the shock and noise level in the cabin decreases. Operating Environment Maximum Protection The cab is roomy and ergonomically designed with low noise level and good visibility. full view front window and large rear and side windows provide excellent visibility in all directions. Wide, omfortable Operating Space ll the controls are designed and positioned according to the latest ergonomic research. Reinforced pillars have also been added for greater cab rigidity. Easy-to-Reach ontrol Panels Rear Emergency Exit Window Raise-up Wiper and abin Lights New joystick grips for precise control have been equipped with 4 switches. Switches and other essential controls are located near the operator. This helps keep operator movement to a minimum, enhancing control with less operator fatigue. Rear Exit Window is designed with easy exit for operator's safety. Raise-up wiper has enhanced for the better front view. abin Lights enhances safety by brightly lighting the surroundings during night work(optional) Power boost/dummy One touch deceleration Right Horn/Optional/Dummy Left The best working conditions in a pleasant environment. entralized control panel Horn button ᵾ Wide ab with Excellent Visibility Highly Sensitive Joystick and Easy Entrance n dditional storage box and cup holder are located behind operator s seat, and it keeps food and beverages cool or hot. Storage ox and up Holder Option button Smooth Travel Pedal and Foot Rests Remote Radio control Travel lever luster One touch decel button Hour meter Travel pedal Fully adjustable suspension seat Safety lever Power boost button Joystick control lever ir onditioner and Heater controller HYUNDI ONSTRUTION EQUIPMENT 06 / 07
UMMINS QS6.7 Engine utomatic Engine Overheat Prevention If the engine coolant temperature gets too high, the PU controller lowers the engine speed and cools the engine. nti Restart System Power oost ontrol System utomatic Warming-up System The new system protects the starter from re-starting during engine operation, even if the operator accidentally turns the start key again. When the power boost system is activated, digging power increases about 10%. It is especially useful when extra power is temporarily needed, for instance, when digging hard earth and rock, or if the bucket teeth are stopped by a stubborn tree root. fter the engine is started, if the engine coolant temperature is low, the PU controller increases the engine speed and automatically increases the pump flow rate to warm up the engine more effectively. The Definition of Progress The Quantum System Series 6.7-liter engine combines full-authority electronic controls with the reliable performance. The electronics with the QS6.7 have been proven with our high-horsepower productsworking in the harshest, most demanding environments-search as dusty, non-stop mining operations while meeting emissions regulations worldwide. The QS6.7 features 24 valve designed with centered injectors and symmetrical piston bowl. The combination of improved airflow and evenly dispersed fuel results in increased power, improved transient reponse and reduced fuel consumption. The six cylinders, turbocharged, 4 cycle, harger air cooled engine is built for power, reliability, economy and low emissions. This engine meets Tier 3 emissions regulations. dvanced Hydraulic System Self Diagnosis System DVNED PO SYSTEM The advanced PO(omputer ided Power Optimization) system maintains engine and mutual pump power at optimum levels. Mode selections are designed for various work loads and maintaining high performance while reducing fuel consumption. Features such as auto deceleration and power boost are included in the system. The system monitors engine speed, coolant temperature, and hydraulic oil temperature. ontained within the system are self diagnostic capabilities which are displayed by error codes on the cluster. uto Decel / One Touch Decel RPM 2 1 3 1 POWER MODE H mode: High power S mode: Standard power 2 WORK MODE Heavy duty work General work reaker 3 USER MODE M mode: Maximum Power U mode : Memorizing Operator s Preferable Power Setting uto Deceleration System When remote-control valves are in neutral position more than 4 seconds, PU controller instructs the accel actuator to reduce engine speed to auto decel rpm. This decreases fuel consumption and reduces cab noise levels. Increased Higher Performance The PU controller diagnoses problems in the PO system caused by electric and hydraulic malfunctions and displays them on the LD monitor of the cluster through error codes. This controller has the capacity to identify 48 distinct types of errors. s the information from this device, such as engine rpm, main pump delivery pressure, battery voltage, hyd. temperature, and the state of all types of electric switches, provides the operator with a much more exact state of machine operating condition. This makes the machine easier to troubleshoot when anything does go wrong. Reinforced ucket and ucket Linkage Sealed and adjustable bucket linkage provides less wear of pins and bushes as well as silent operation.the design includes bucket link durability and anti wear characteristics. dditional reinforcement plates on cutting edge section. Reinforced bucket is made with thicker steel and additional lateral plate. One Touch Decel System When the one touch decel switch is pressed, PU controller controls the accel actuator to reduce engine speed to low idle. nd then the one touch decel switch is pressed again, the engine speed recovers. Strong and Stable Lower Frame Pump Flow ontrol System In neutral position: Pump flow is reduced to a minimum to eliminate power loss. In operation: Maximum pump flow is delivered to the actuator to increase the speed. With movement of the control lever, pump flow is automatically adjusted and the actuator speed can be proportionally controlled. Reinforced box-section frame is all welded, low-stress, high-strength steel. It guarantees safety and resistance against external impact when driving on rough ground and working on wet sites through high tensile strength steel panels, with highly durable upper and lower rollers and track guards. Long undercarriage incorporates heavy duty excavator style components. X-leg type center frame is integrally welded for maximum strength and durability. Powerful and Preciser Swing ontrol Improved shock absorbing characteristics make stopping a precise and smooth action oom & rm Holding System The Holding valves in the main control valve prevents the boom & arm from dropping over an extended period in neutral position. rm Flow Regeneration System rm flow regeneration valve provides smooth arm-in operation without cavitation. Max. Flow ut-off System Hydraulic Damper in Travel Pedal For precise control and finishing work, the Max. Flow ut-off System reduces pump flow, thus allowing smooth operation. Improved travel controllability & feeling by shock reducing when starting and stopping. Track Rail Guide & djusters Durable track rail guides keep track links in place. Track adjustment is made easy with standard grease cylinder track adjusters and shock absorbing springs. (Full Track Guide : Option) HYUNDI ONSTRUTION EQUIPMENT 08 / 09
Robex 250L-7 Full Open Doors and Master Key System Provide Easy ccess for Servicing. Durability of structure proven through FEM(Finite Element Method) analysis and long term durability test. Reliability & Serviceability Side over with Left & Right Swing Open Type Easy to Maintain Engine omponents Easy access to vital components gives unrestricted view of component allows easy maintenance and repair. The cooling and preheating system are provided for optimum and immediate operation, guaranteeing longer life for the engine and hydraulic components. Servicing of the engine and hydraulics is considerably simplified due to total accessibility. entralized Electric ontrol ox and Easy to hange ir leaner ssembly Highly Efficient Hydraulic Pump Large Tool ox for Extra Storage Electric control box and ir cleaner are centralized in one or the same compartment for easy service. HYUNDI ONSTRUTION EQUIPMENT 10 / 11
Specifications ackhoe ttachment Engine Rated flywheel horse power uckets Swing system Model ummins QS6.7 Type Water cooled, 4 cycle Diesel, 6-ylinders in line, direct injection, Turbocharged, charge air cooled, Low emission J1995 (gross) J1349 (net) 6271/1 (gross) DIN 6271/1 (net) SE Max. torque ore ᴧ stroke Piston displacement atteries Starting motor lternator 176 HP (131 kw) at 1,900 rpm 163 HP (121 kw) at 1,900 rpm 178 PS (131 kw) at 1,900 rpm 165 PS (121 kw) at 1,900 rpm 81.4 f.m(589 f.ft) at 1,400 rpm 107 x 124 mm (4.2 x 4.9 ) 6,700 cc (409 cu in) 2 x 12 V x 100 H 24 V, 4.5kW 24 V, 50 mp Hydraulic system Main pump Type Two variable displacement piston pumps 2ᴧ222ὀ/min (59.2 US gpm / 49.3 UK gpm) Max. flow Gear pump Sub-pump for pilot circuit ross-sensing and fuel saving pump system Hydraulic motors Two speed axial piston motor with brake valve and parking brake Travel xial piston motor with automatic brake Swing Relief valve setting Implement circuits 330 f/cm2 (4,690 psi) Travel 330 f/cm2 (4,690 psi) Power boost (boom, arm, bucket) 360 f/cm2 (5,120 psi) Swing circuit 275 f/cm2 (3,910 psi) Pilot circuit 35 f/cm2 (500 psi) Service valve Installed Hydraulic cylinders oom : 2-140 ᴧ 1345 mm (5.5 ᴧ 52.9 ) No. of cylinderrm : 1-150 ᴧ 1620 mm (5.9 ᴧ 63.8 ) bore ᴧ stroke ucket : 1-135 ᴧ 1185 mm (5.3 ᴧ 46.7 ) xial piston motor Planetary gear reduction Grease-bathed Multi wet disc 12 rpm SE heaped m3 (yd3) 0.60 (0.78) 0.79 (1.03) Fully hydrostatic type xial piston motor, in-shoe design Planetary reduction gear 21,600 f (47,600 f) 5.3 km/hr (3.3 mph) / 3.3 km/hr (2.0 mph) 35ᴋ(70 %) Multi wet disc ontrol (refilling) Fuel tank Engine coolant Engine oil Swing device Final drive(each) STD/H Hydraulic system(including tank) Hydraulic tank liter 340 35 24 6 3.3 300 190 UK gal 74.8 7.7 5.3 1.3 0.73 66.0 41.8 US gal 89.8 9.2 6.3 1.6 0.87 79.3 50.2 Undercarriage X-leg type center frame is integrally welded with reinforced box-section track frames. The undercarriage includes lubricated rollers, idlers, track adjusters with shock absorbing spring and sprockets, and track chain with double or triple grouser shoes. X - leg type Pentagonal box type 51 2 9 2 enter frame Track frame No. of shoes on each side No. of carrier roller on each side No. of track roller on each side No. of rail guard on each side apacity m3 (yd3) Traveling and steering Engine throttle Lights Two levers with pedals Electric, Dial type Two lights mounted on the boom and one in the battery box Width mm (in) SE heaped EE heaped Without side cutters With side cutters 0.60 (0.78) 0.79 (1.03) 1.03 (1.35) ᵀ 1.08 (1.41) 1.50 (1.96) ᶉ1.07 (1.40) ᶉ1.15 (1.50) ᶉ1.27 (1.66) ᶉ1.46 (1.91) 1.16 (1.52) 0.55(0.72) 0.70 (0.92) 0.90 (1.18) 0.95 (1.24) 1.30 (1.70) 0.95 (1.24) 1.00(1.31) 1.10 (1.44) 1.28 (1.67) 1.00 (1.31) 760(29.9) 890 (35.0) 1090 (42.9) 1130 (44.5) 1490 (58.7) 1150 (45.3) 1210 (47.6) 1310(51.6) 1460 (57.5) 1340 (52.8) 880(34.6) 1010 (39.8) 1210 (47.6) 1250 (49.2) 1610 (63.4) - Weight () rm 720 (1590) 790 (1740) 890 (1960) 910 (2000) 1080 (2380) 1120 (2470) 1160 (2560) 1240 (2730) 1320 (2910) 1280 (2820) ᵀ: Standard backhoe bucket ᶉ: Heavy-duty bucket : Rock-Heavy duty bucket Recommendation mm(ft.in) ᵀ5850 (19 2 ) oom (6 11 ) 2500 (8 2 ) 3050 (10 0 ) 3600 M M : M pplicable for materials with density of 2,000 / m (3,370 / yd ) or less pplicable for materials with density of 1,600 / m3 (2,700 / yd3) or less : pplicable for materials with density of 1,100 / m3 (1,850 / yd3) or less 3 3 : rms oom and arms are of all-welded, low-stress, full-box section design. 5850 mm(19 2 ) mono boom and mm(6 11 ), 2500 mm(8 2 ), 3050 mm(10 0 ), 3600 mm, arms are available. uckets are all-welded, high-strength steel implements. Operating weight, including 5680mm (18 8 ) boom, 2920m (9 7 ) arm, SE heaped 0.92m3 (1.20 yd3) backhoe bucket, lubricant, coolant, full fuel tank, hydraulic tank and the standard equipment. mm (6ᴯ11ᴰ) 2500mm (8ᴯ2ᴰ) Upperstructure ounterweight oom (with rm cylinder) Shoes Type Double grouser Operating weight () pressure f/cm (psi) R250L-7 25,200(55,600) 0.51(7.25) R250L-7 H/ 27,450(60,520) 0.53(7.54) 700 mm (28 ) R250L-7 25,500(56,200) 0.44(6.26) R250L-7 H/ 28,020(61,770) 0.46(6.54) 800 mm (32 ) R250L-7 25,800(56,900) 0.39(5.55) R250L-7 H/ 28,400(62,610) 0.41(5.83) ᵀStandard equipment R250L-7 R250L-7 H/ 26,100(57,500) 28,620(63,100) rm 2 ᵀ600 mm (24 ) 710 mm (28 ) 3600mm (11ᴯ10ᴰ) Digging force Width mm(in) 900 mm (35.4 ) ᵀ3050mm (10ᴯ0ᴰ) 5,520 (12,170 ) 4,600 (10,140 ) 2,280 (5,030 ) Operating weight Pilot pressure operated joysticks and pedals with detachable lever provide almost effortless and fatigueless operation. Pilot control 1.16 (1.52) ᶉ1.07(1.40) ᶉ1.27(1.66) ᶉ1.15(1.50) ᶉ1.46(1.91) Operating weight (approximate) Triple grouser Two joysticks with one safety lever (LH): Swing and arm, (RH): oom and bucket(iso) ᵀ1.08 (1,41) 1.50 (1,96) 1.03 (1.35) oolant & Lubricant capacity Major component weight Drives & rakes Drive method Drive motor Reduction system STD/H Max. drawbar pull Max. travel speed(high) / (low) Gradeability Parking brake Swing motor Swing reduction Swing bearing lubrication Swing brake Swing speed 0.35(4.98) 0.46(6.54) ucket digging force rm crowd force ᵀ3050 (10 0 ) 1450 (3200) 3600 1520 (3350) 156.9 [171.2] 16000 [17450] 35270 [38480] 156.9 [171.2] 16000 [17450] 35270 [38480] 156.9 [171.2] 16000 [17450] 35270 [38480] 178.5 [194.7] 18200 [19850] 40120 [43770] 178.5 [194.7] 18200 [19850] 40120 [43770] 178.5 [194.7] 18200 [19850] 40120 [43770] 178.5 [194.7] 18200 [19850] 40120 [43770] SE kn f f 135.3 [147.6] 13800 [15050] 30420 [33190] 130.4 [142.3] 13300 [14510] 29320 [31990] 114.7 [125.2] 11700 [12760] 25790 [28130] 116.7 [127.3] 11900 [12980] 26230 [28610] ISO kn f f 140.2 [153.0] 14300 [15600] 31530 [34400] 134.4 [146.6] 13700 [14950] 30200 [32950] 118.7 [129.4] 1 [13200] 26680 [29110] 120.6 [131.6] 12300 [13420] 27120 [29590] Length Weight mm(ft.in) () (6 11 ) 1330 (2930) 2500 (8 2 ) 1360 (3000) SE kn f f 156.9 [171.2] 16000 [17450] 35270 [38480] ISO kn f f Note : rm weight including bucket cylinder and linkage. Remark [ ]: Power oost ᵀStandard arm HYUNDI ONSTRUTION EQUIPMENT 12 / 13
Dimensions & Working Ranges Dimensions R250L-7 Dimensions R250L-7 High hassis E G F J D, D' K H L I D D E F G H Tumbler distance Overall length of crawler clearance of counterweight Tail swing radius Rear-end length Overall width of upperstructure Overall of cab Min. ground clearance Track gauge 3830 4640 1115 2965 2870 2840 2990 480 2580 (12 7 ) (15 3 ) (3 8 ) (9 9 ) (9 11 ) (9 11 ) (9 10 ) (1 7 ) (8 6 ) ᵀ5850 (19 2 ) oom length rm length (6 11 ) 2500 (8 2 ) ᵀ3050 (10 0 ) 3600 I Overall length 10050 (33 0 ) 10000 (32 10 ) 9920 (32 7 ) 9910 (32 6 ) J Overall of boom 3530 (11 7 ) 3590 (11 9 ) 3220 (10 7 ) 3590 (11 9 ) K Track shoe width ᵀ600 (24 ) 700 (28 ) 800 (32 ) 900 (36 ) L Overall width 3180 (10 5 ) 3280 (10 9 ) 3380 (11 1 ) 3480 (11 5 ) D D E F G H Tumbler distance Overall length of crawler clearance of counterweight Tail swing radius Rear-end length Overall width of upperstructure Overall of cab Min. ground clearance Track gauge 4030 4940 1470 2965 2870 2840 3345 765 2790 (13 3 ) (16 2 ) (4 10 ) (9 9 ) (9 5 ) (9 4 ) (11 0 ) (2 6 ) (9 2 ) ᵀStandard Equipment ᵀ5850 (19 2 ) oom length rm length (6 11 ) 2500 (8 2 ) ᵀ3050 (10 6 ) 3600 I Overall length 10060 (33 0 ) 9970 (32 9 ) 9760 (32 0 ) 9930 (32 7 ) J Overall of boom 3610 3750 (12 4 ) 3240 (10 8 ) 3620 (11 11 ) K Track shoe width ᵀ600 (23.6 ) 700 (27.6 ) 800 (31.5 ) 900 (35.4 ) L Overall width 3390 (11 1 ) 3490 (11 5 ) 3590 (11 9 ) 3690 (12 1 ) ᵀStandard Equipment Working ranges R250L-7 Working ranges R250L-7 High hassis ᵀ5850(19 2 ) oom length ᵀ5850(19 2 ) oom length rm length (6 11 ) 2500 (8 2 ) ᵀ3050 (10 0 ) 3600 rm length (6 11 ) 2500 (8 2 ) ᵀ3050 (10 6 ) 3600 Max. digging reach 9550 (31 4 ) 9870 (32 5 ) 10360 (34 0 ) 10870 (35 8 ) Max. digging reach 9550 (31 4 ) 9870 (32 5 ) 10360 (34 0 ) 10870 (35 8 ) Max. digging reach on ground 9360 (30 9 ) 9680 (31 9 ) 10190 (33 5 ) 10700 (35 1 ) Max. digging reach on ground 9280 (30 5 ) 9160 (31 6 ) 10110 (33 2 ) 10360 (34 11 ) Max. digging depth 6050 (19 10 ) 6450 (21 2 ) 7000 (23 0 ) 7550 (24 9 ) Max. digging depth 5680 (18 8 ) 6080 (19 11 ) 6630 (21 9 ) 7180 (23 7 ) Max. digging depth (8' level) 5840 (19 2 ) 6260 (20 6 ) 6830 (22 5 ) 7400 (24 3 ) Max. digging depth (8' level) 5470 (17 11 ) 5890 (19 4 ) 6460 (21 2 ) 7030 (23 1 ) Max. vertical wall digging depth 5480 (18 0 ) 5640 (18 6 ) 6150 (20 2 ) 6830 (22 5 ) Max. vertical wall digging depth 5120 (16 10 ) 5300 (17 5 ) 5790 (19 0 ) 6470 (21 3 ) D Max. digging 9450 (31 0 ) 9460 (31 0 ) 9670 (31 9 ) 9920 (32 7 ) D Max. digging 9820 (32 3 ) 9840 (32 3 ) 10040 (32 11 ) 10280 (33 9 ) E Max. dumping 6360 (20 10 ) 6420 (21 1 ) 6630 (21 9 ) 6860 (22 6 ) E Max. dumping 6730 (22 1 ) 6790 (22 3 ) 7000 (23 0 ) 7220 (23 8 ) F Min. swing radius 4420 (14 6 ) 4200 (13 9 ) 3980 (13 1 ) 3900 (12 10 ) F Min. swing radius 4140 (13 7 ) 4030 (13 3 ) 3940 (12 11 ) 3900 (12 10 ) ᵀStandard Equipment ᵀStandard Equipment HYUNDI ONSTRUTION EQUIPMENT 14 / 15
Lifting apacities Lifting capacities - R250L-7 Rating over-front Rating over-side or 360 degree oom : 5.85m (19 2 ) rm : 2.10 m (6 11 ) ucket : 1.08 m 3 SE heaped Shoe : 600mm(24 ) triple grouser with 4,600 (10,140 ) counterweight oom : 5.85m (19 2 ) rm : 3.60 m ucket : 1.08 m 3 SE heaped Shoe : 600mm(24 ) triple grouser with 4,600 (10,140 ) counterweight t max. reach 7.5 m (25.0 ft) apacity Reach t max. reach 7.5 m (25.0 ft) 9.0 m (30.0 ft) apacity Reach - - - *15590 *34370 *17410 *38380 *13610 *30000 15160 33420 15470 34110 *13610 *30000 *7950 *10440 *23020 *12520 *27600 13110 28900 13090 28860 *12310 *27140 *9640 *21250 *7950 8200 18080 7520 16580 7250 15980 7230 15940 7390 16290 7790 17170 *5900 *13010 *6630 *14620 *7750 *17090 8250 18190 8010 17660 7940 17500 8050 17750 5840 12870 5570 12280 5190 11440 4850 10690 4640 10230 4580 10100 4680 10320 6060 13360 5900 13010 5720 12610 5600 12350 3690 8140 3550 7830 3380 7450 3270 7210 5220 11510 4520 9960 4210 9280 4170 9190 4410 9720 5060 11160 *6420 *14150 3200 7050 2710 5970 2480 5470 2430 5360 2580 5690 2990 6590 3980 8770 8.32 (27.3) 8.91 (29.2) 9.17 (30.1) 9.14 (30.0) 8.80 (28.9) 8.13 (26.7) 6.98 (22.9) - - - *9080 *20020 *9080 *20020 *12710 *28020 *11110 *24490 *13310 *29340 *16960 *37390 *18260 *40260 *12170 *28020 *11110 *24490 *13310 *29340 14680 32360 15050 33180 *10140 *22350 *12150 *26790 12950 28550 12880 28400 *12250 *27010 8040 17730 7390 16290 7090 15630 7040 15520 7180 15830 *6010 *13250 *7400 *16310 8070 17790 7830 17260 7750 17090 7850 17310 5490 1 5040 11110 4680 10320 4470 9850 4400 9700 4490 9900 *4210 *9280 *4620 *10190 *5300 *11680 5790 12760 5570 12280 5430 11970 5390 11880 4040 8910 3890 8580 3670 8090 3430 7560 3230 7120 3100 6830 3070 6770 *2800 *6170 *3990 *8800 4210 9280 4090 9020 2650 5840 2550 5620 2430 5360 2320 5110 3960 8730 3530 7780 3310 7300 3260 7190 3380 7450 3710 8180 4420 9740 *5900 *13010 2360 5200 2040 4500 1870 4120 1820 4010 1890 4170 4630 2550 5620 3580 7890 9.77 (32.1) 10.27 (33.7) 10.49 (34.4) 10.46 (34.3) 10.18 (33.4) 9.62 (31.6) 8.71 (28.6) 7.30 (24.0) Rating over-front Rating over-side or 360 degree oom : 5.85m (19 2 ) rm : 2.50 m (8 2 ) ucket : 1.08 m 3 SE heaped Shoe : 600mm(24 ) triple grouser with 4,600 (10,140) counterweight oom : 5.85m (19 2 ) rm : 2.10 m (6 11 ) ucket : 1.08 m 3 SE heaped Shoe : 600mm(24 ) triple grouser with 4,600 (10,140) counterweight t max. reach 7.5 m (25.0 ft) apacity Reach t max. reach 7.5 m (25.0 ft) apacity Reach - - - *16500 *36380 *16500 *36380 *15230 *33580 *18440 *40650 *15140 *33380 14960 32980 15250 33620 *15140 *33380 *9730 *21450 *12000 *26460 13150 28990 13050 28770 *12700 *28000 *10620 *23410 8410 18540 7650 16870 7280 16050 7190 15850 7300 16090 7620 16800 *6190 *7350 *16200 8310 18320 8030 17700 7910 17440 7970 17570 5670 12500 5280 11640 4910 10820 4660 10270 4560 10050 4610 10160 *5740 *12650 5950 13120 5750 12680 5600 12350 5550 12240 3770 8310 3590 7910 3410 7520 3270 7210 3220 7100 4900 10800 4280 9440 3990 8800 8710 4150 9150 4690 10340 5940 13100 3000 6610 2550 5620 2340 5160 2290 5050 2410 5310 2750 6060 3550 7830 8.67 (28.4) 9.23 (30.3) 9.48 (31.1) 9.45 (31.0) 9.13 (30.0) 8.49 (27.9) 7.41 (24.3) - - - *15590 *34370 *17410 *38380 *13610 *30000 13120 28920 13420 29590 *13610 *30000 *7950 *10440 *23020 *12520 *27600 13050 28770 13030 28730 *12310 *27140 *9640 *21250 *7950 7330 16160 6670 14700 6410 14130 6390 14090 6540 14420 6930 15280 *5900 *13010 *6630 *14620 *7750 *17090 8210 18100 7970 17570 7900 17420 8020 17680 5290 11660 5030 11090 4660 10270 4330 9550 4120 9080 4060 8950 4160 9170 6040 13320 5870 12940 5690 12540 5570 12280 3310 7300 3170 6990 3010 6640 2900 6390 5200 11460 4500 9920 4190 9240 4150 9150 4390 9680 5040 11110 *6420 *14150 2870 6330 2410 5310 2190 4830 2150 4740 2280 5030 2660 5860 3560 7850 8.32 (27.3) 8.91 (29.2) 9.17 (30.1) 9.14 (30.0) 8.80 (28.9) 8.13 (26.7) 6.98 (22.9) oom : 5.85m (19 2 ) rm : 3.05 m (10 0 ) ucket : 1.08 m 3 SE heaped Shoe : 600mm(24 ) triple grouser with 4,600 (10,140 ) counterweight oom : 5.85m (19 2 ) rm : 2.50 m (8 2 ) ucket : 1.08 m 3 SE heaped Shoe : 600mm(24 ) triple grouser with 4,600 (10,140 ) counterweight t max. reach 7.5 m (25.0 ft) apacity Reach t max. reach 7.5 m (25.0 ft) apacity Reach - - - *10020 *22090 *30090 *17980 *39640 *10020 *22090 *30090 *17980 *39640 *13880 *30600 *9530 *21010 *10660 *23500 *13980 *30820 *18590 *40980 *16880 *37210 *13880 *30600 *9530 *21010 *10660 *23500 *13980 *30820 14860 32760 15340 33820 *8560 *18870 *11070 *24410 *12720 *28040 12930 28510 12960 28570 *11570 *25510 *8560 *18870 7800 17200 7280 16050 7090 15630 7110 15670 7340 16180 *5460 *12040 *6670 *14700 *7970 *17570 8010 17660 7830 17260 7820 17240 8020 17680 *5460 *12040 5360 11820 4950 10910 4640 10230 4480 9880 4470 9850 4640 10230 *4100 *9040 *5160 *11380 *5780 *12740 5750 12680 5560 12260 5460 12040 8710 3830 8440 3620 7980 3400 7500 3230 7120 3140 6920 4400 9700 3880 8550 3630 8000 3580 7890 3730 8220 4150 9150 5080 11200 *6060 *13360 2660 5860 2280 5030 2090 4610 2040 4500 2130 4700 2390 5270 2980 6570 4480 9880 9.22 (30.2) 9.74 (32.0) 9.98 (32.7) 9.95 (32.6) 9.65 (31.7) 9.05 (29.7) 8.06 (26.4) 6.48 (21.3) - - - *16500 *36380 *16500 *36380 *15230 *33580 *18440 *40650 *15140 *33380 12930 28510 13210 29120 13750 30310 *9730 *21450 *12000 *26460 13090 28860 12990 28640 *12700 *28000 *10620 *23410 7530 16600 6790 14970 6440 14200 6350 14000 6450 14220 6760 14900 *6190 *7350 *16200 8270 18230 7990 17610 7880 17370 7940 17500 5130 11310 4750 10470 4380 9660 4140 9130 4040 8910 4090 9020 *5740 *12650 5920 13050 5720 12610 5570 12280 5520 12170 3380 7450 3210 7080 3030 6680 2900 6390 2850 6280 4880 10760 4260 9390 3970 8750 3930 8660 4130 9110 4670 10300 5910 13030 2680 5910 2270 5000 2070 4560 2020 4450 2120 4670 2440 5380 3170 6990 8.67 (28.4) 9.23 (30.3) 9.48 (31.1) 9.45 (31.0) 9.13 (30.0) 8.49 (27.9) 7.41 (24.3) 1. Lifting capacity is based on SE J1097, ISO 10567. 2. Lifting capacity of the Robex Series does not exceed 75% of tipping load with the machine on firm, level ground or 87% of full hydraulic capacity. 3. The load point is a hook (standard equipment) located on the back of the bucket. 4. (*) indicates load limited by hydraulic capacity. 1. Lifting capacity is based on SE J1097, ISO 10567. 2. Lifting capacity of the Robex Series does not exceed 75% of tipping load with the machine on firm, level ground or 87% of full hydraulic capacity. 3. The load point is a hook (standard equipment) located on the back of the bucket. 4. (*) indicates load limited by hydraulic capacity. HYUNDI ONSTRUTION EQUIPMENT 16 / 17
Lifting apacities oom : 5.85m (19 2 ) rm : 3.05 m (10 0 ) ucket : 1.08 m 3 SE heaped Shoe : 600mm(24 ) triple grouser with 4,600 (10,140) counterweight oom : 5.85m (19 2 ) rm : 2.50 m (8 2 ) ucket : 1.08 m 3 SE heaped Shoe : 600mm(24 ) triple grouser with 4,600 (10,140) counterweight t max. reach 7.5 m (25.0 ft) apacity Reach t max. reach 7.5 m (25.0 ft) apacity Reach - - - *10020 *22090 *30090 *17980 *39640 *10020 *22090 *30090 *17980 *39640 *13880 *30600 *9530 *21010 *10660 *23500 *13980 *30820 *18590 *40980 *16880 *37210 *13880 *30600 *9530 *21010 *10660 *23500 12620 27820 12840 28310 13290 29300 *8560 *18870 *11070 *24410 *12720 *28040 12870 28370 12900 28440 *11570 *25510 7780 17150 6940 15300 6430 14180 6250 13780 6270 13820 6490 14310 *5460 *12040 *6670 *14700 *7970 *17570 7980 17590 7790 17170 7780 17150 7980 17590 5230 11530 4830 10650 4420 9740 4120 9080 3960 8730 8710 4120 9080 *4100 *9040 *5160 *11380 *5780 *12740 5720 12610 5530 12190 5430 11970 3570 7870 3440 7580 3240 7140 3030 6680 2850 6280 2760 6080 4380 9660 3860 8510 3610 7960 3560 7850 3710 8180 4130 9110 5060 11160 *6060 *13360 2370 5220 2020 4450 1840 4060 1790 1860 4100 4630 2640 5820 4010 8840 9.22 (30.2) 9.74 (32.0) 9.98 (32.7) 9.95 (32.6) 9.65 (31.7) 9.05 (29.7) 8.06 (26.4) 6.48 (21.3) - - - *17990 *39660 *17990 *39660 *16770 *36970 *17840 *39330 *13960 *30780 *16770 *36970 *17840 *39330 *13960 *30780 *7770 *17130 *10330 *22770 *12400 *27340 *13360 *29450 *13340 *29410 *12370 *27270 *9750 *21500 *7770 *17130 10080 22220 9390 20700 9090 20040 9050 19950 9210 20300 9610 21190 *5540 *12210 *6440 *14200 *7650 *16870 *8780 *19360 *9520 *20990 9560 21080 *9020 *19890 *5540 *12210 *6440 *14200 6380 14070 6020 13270 5800 12790 5730 12630 5830 12850 *5850 *12900 *6430 *14180 6860 15120 6730 14840 4600 10140 4410 9720 4230 9330 4110 9060 *5050 *11130 5030 11090 4790 10560 4810 10600 5120 11290 5900 13010 *6400 *14110 3560 7850 3140 6920 2950 6500 2940 6480 3140 6920 3640 8020 4810 10600 8.83 (29.0) 9.32 (30.6) 9.50 (31.2) 9.40 (30.8) 9.01 (29.6) 8.28 (27.2) 7.07 (23.2) oom : 5.85m (19 2 ) rm : 3.60 m ucket : 1.08 m 3 SE heaped Shoe : 600mm(24 ) triple grouser with 4,600 (10,140 ) counterweight oom : 5.85m (19 2 ) rm : 3.05 m ucket : 1.08 m 3 SE heaped Shoe : 600mm(24 ) triple grouser with 4,600 (10,140 ) counterweight t max. reach 7.5 m (25.0 ft) 9.0 m (30.0 ft) apacity Reach t max. reach 7.5 m (25.0 ft) apacity Reach - - - *9080 *20020 *9080 *20020 *12710 *28020 *11110 *24490 *13310 *29340 *16960 *37390 *18260 *40260 *12710 *28020 *11110 *24490 12560 27690 12660 27910 13010 28680 *10140 *22350 *12150 *26790 12890 28420 12820 28260 *12250 *27010 7160 15790 6540 14420 6250 13780 6190 13650 6330 13960 *6010 *13250 *7400 *16310 8030 17700 7790 17170 7710 17000 7820 17240 4940 10890 4510 9940 4160 9170 8710 3880 8550 3970 8750 *4210 *9280 *4620 *10190 *5300 *11680 5760 12700 5540 12210 5400 11900 5370 11840 3660 8070 3510 7740 3290 7250 3060 6750 2860 6310 2730 6020 2700 5950 *2800 *6170 *3990 *8800 4180 9220 4070 8970 2350 5180 2250 4960 2130 4700 2030 4480 3940 8690 3510 7740 3290 7250 3240 7140 3360 7410 3690 8140 4390 9680 *5900 *13010 2090 4610 1790 1630 3590 1580 3480 1640 3620 1830 4030 2240 4940 3190 7030 9.77 (32.1) 10.27 (33.7) 10.49 (34.4) 10.46 (34.3) 10.18 (33.4) 9.62 (31.6) 8.71 (28.6) 7.30 (24.0) - - - *7400 *16310 *10840 *23900 *14600 *32190 *7400 *16310 *10840 *23900 *14600 *32190 *15600 *34390 *9380 *20680 *11330 *24980 *14940 *32940 *19040 *41980 *15600 *34390 *9380 *20680 *11330 *24980 *14940 *32940 *19040 *41980 *9200 *20280 *11560 *25490 *12950 *28550 *13340 *29410 *12790 *28200 *10980 *24210 *9200 *20280 9510 20970 9060 19970 8920 19670 9000 19840 9290 20480 *5720 *12610 *6980 *15390 *8240 *18170 *9180 *20240 9460 20860 *9310 *20530 *5720 *12610 6450 14220 6050 13340 5760 12700 5640 12430 5660 12480 *4570 *10080 *5290 *11660 *5940 *13100 *6640 *14640 6680 14730 6610 14570 *4570 *10080 4650 10250 4430 9770 4220 9300 4060 8950 3990 8800 *4600 *10140 4590 10120 4370 9630 4380 9660 4620 10190 5220 11510 6120 *13490 3190 7030 2830 6240 2660 5860 2650 5840 2800 6170 3180 7010 4040 8910 9.37 (30.7) 9.82 (32.2) 9.99 (32.8) 9.90 (32.5) 9.53 (31.3) 8.85 (29.0) 7.76 (25.5) Lifting capacities - R250L-7 High hassis Rating over-front Rating over-side or 360 degree oom : 5.85m (19 2 ) rm : 2.10 m (6 11 ) ucket : 1.08 m 3 SE heaped Shoe : 600mm(24 ) triple grouser with 4,600 (10,140) counterweight oom : 5.85m (19 2 ) rm : 3.60 m ucket : 1.08 m 3 SE heaped Shoe : 600mm(24 ) triple grouser with 4,600 (10,140 ) counterweight t max. reach 7.5 m (25.0 ft) apacity Reach t max. reach 7.5 m (25.0 ft) 9.0 m (30.0 ft) apacity Reach - - *17660 *38930 *16740 *36910 *17660 *38930 *16740 *36910 *8510 *18760 *11020 *24290 *12840 *28310 *13480 *29720 *13180 *29060 *11890 *26210 1. Lifting capacity is based on SE J1097, ISO 10567. 2. Lifting capacity of the Robex Series does not exceed 75% of tipping load with the machine on firm, level ground or 87% of full hydraulic capacity. *8510 *18760 9880 21780 9280 20460 9080 20020 9100 20060 9310 20530 *6020 *13270 *6870 *15150 *8020 *17680 *9060 *19970 9620 21210 9590 21140 *8600 *18960 *6020 *13270 6680 14730 6290 13870 5970 13160 5790 12760 5760 12700 5920 13050 *6200 *13670 *6710 *14790 6840 15080 6740 14860 4530 9990 4370 9630 4210 9280 4120 9080 *5390 *11880 5310 11710 5040 11110 5080 11200 5450 12020 6380 14070 *6310 *13910 3. The load point is a hook (standard equipment) located on the back of the bucket. 4. (*) indicates load limited by hydraulic capacity. 3780 8330 3310 7300 3110 6860 3120 6880 3360 7410 8710 5420 11950 8.49 (27.9) 9.00 (29.5) 9.19 (30.2) 9.09 (29.8) 8.68 (28.5) 7.91 (26.0) 6.61 (21.7) - - - *6860 *15120 *9790 *21580 *13030 *28730 *16990 *37460 *6860 *15120 *9790 *21580 *13030 *28730 *16990 *37460 *12780 *28180 *11520 *25400 *11460 *25260 *14050 *30970 *18050 *39790 *38650 *12780 *28180 *11520 *25400 *11460 *25260 *14050 *30970 *18050 *39790 *38650 *8090 *17840 *10710 *23610 *12470 *27490 *13240 *29190 *13080 *28840 *11820 *26060 1. Lifting capacity is based on SE J1097, ISO 10567. 2. Lifting capacity of the Robex Series does not exceed 75% of tipping load with the machine on firm, level ground or 87% of full hydraulic capacity. *8090 *17840 9730 21450 9150 20170 8910 19640 8900 19620 9100 20060 *6340 *13980 *7720 *17020 *8820 *19440 9440 20810 9400 20720 *8500 *18740 *6340 *13890 6130 13510 5800 12790 5610 12370 5580 12300 5720 12610 *4280 *9440 *4760 *10490 *5480 *12080 6260 13800 6680 14730 6560 14460 6560 14460 *4280 *9440 4720 10410 4480 9880 4240 9350 4050 8930 3940 8690 3940 8690 *3150 *6940 *4200 *9260 *4810 *10600 *4500 *9920 *3150 *6940 3200 7050 3070 6770 2980 6570 3. The load point is a hook (standard equipment) located on the back of the bucket. 4. (*) indicates load limited by hydraulic capacity. *4210 *9280 4190 9240 4000 8820 4000 8820 4200 9260 4670 10300 5650 12460 *5890 *12990 2870 6330 2560 5640 2410 5310 2390 5270 2510 5530 2810 6190 3450 7610 5000 11020 9.92 (32.5) 10.34 (33.9) 10.50 (34.4) 10.42 (34.2) 10.07 (33.0) 9.44 (31.0) 8.43 (27.7) 6.86 (22.5) HYUNDI ONSTRUTION EQUIPMENT 18 / 19