April 25 th at 2:00 PM at the Sharonville Car Show May 16 th at 2:00 PM at Quaker Steak and Lube in Beavercreek. President s Corner.

Similar documents
2015 (LA) Challenger SRT Hellcat

Clay is the Way Is a clay bar kit in your future?...it is if you want the best shine possible for your musclecar!

SECTION 6 5 SERVICE PROCEDURES AND SPECIFICATIONS. Body

Auto Detailing User Guide Part 1 Exterior & Part 2 Interior. Part 1 Exterior

SECTION 6 5 SERVICE PROCEDURES AND SPECIFICATIONS. Body

Application Guide DISTRIBUTED BY:

Breakthrough Technology for a New Level of Auto Paint Protection!

New Car Protection. OCD valeting want to give your new purchase the very best start in life. 2 Day Booking / FROM 300. Wheels & Arches.

Ensure the boat is completely out of the water and that you are in compliance with local environmental regulations prior to starting.

MATTE PAINT CARE FIRST TIME USE GUIDELINES MORE INFO... Wash Vehicle. Protect Finish

HOW TO REPARE A DENT

PART 1: AUTO DETAILING

Excerpt from. Introduction to Automotive Detailing

Vehicle Care ! WARNING: CLEANING PRODUCTS CLEANING THE EXTERIOR

Engine Oil Transmission Oil + Filter

Two Bucket Wash Method

SECTION 6 CORROSION PREVENTION AND APPEARANCE CARE. Corrosion prevention and appearance care

14 Car Driving & Maintenance Myths

UPGRADE YOUR CAR S PAINT & UPHOLSTERY PROTECTION TO PREMIUMCARCARE

Appendix B Day of Event Check List

Hood stripes Tools needed from AutoZone or any auto parts store: bottle spray, squeegee, a towel that you re using to clean you car up after washing,

How to Properly Clean your Trumpet

GENERAL FIBERGLASS REPAIR SEQUENCE FOR SCRATCHES AND SCUFFS

Electronic Paint- Thickness Gauges What They Are, and Why You Need Them

PRESERVE & PROTECT A Tradition of Excellence Since Don t Settle For Ordinary Protection

Vehicle Care ! WARNING: CLEANING PRODUCTS CLEANING THE EXTERIOR

Reading this manual. Preface

Section 10: Engraving Machine Cleaning

WARNING These following pages are instruction for C5 CE stripes; however, it is the same method applying vinyl. Please spend time to read thru these

Max Protect Ltd London, UK Office: +44 (0)

4.2 Friction. Some causes of friction

HP-100 Acrylic Kit Restoration

Para mas información sobre los productos y la compañía visite:

How I installed new brake pads on my i with Sport Package (should be fine for other E39 s) By Robert B.

JUST LIKE NEW. PROTECT YOUR PAINTWORK AND INTERIOR FOR LIFE. MINI PROTECT X

SW20 Coolant System Maintenance.

Detailing Product Update 2018

Roehrig Engineering, Inc.

1128 W. Tuscarawas St. Canton, OH

Removing Rust During Restoration

KR-70 Kit Acrylic Restoration

USA - INDIA OPT Products Pricelist Ver 1.0

Brake, suspension and side slip testers... the facts! October 2009 Technical Newsletter

INSTALLATION INSTRUCTIONS TOP MOUNT SINKS

Auto Care WIPECO INDUSTRIES

Subaru SVX 1/43 Scale Model Assembly Instructions

What You Need at the Flying Field

Always refer to the manufacturers recommendations located within the literature contained within the unit packet.

Light condition and operation Windshield glass condition Wiper blade condition Paint condition and corrosion Fluid leaks Door and hood lock condition

Mercedes Diesel Valve Adjustment Procedure

Winterizing the Truma-Equipped Winnebago Travato

FINISHING SYSTEMS SILICONE-FREE POLISHING & COMPOUNDING PRODUCTS

HOW - TO SCRATCH & DENT REPAIRS

Refurbishing Kettle Front Brake Callipers

Motion System Components Diagram. Note: #2 Mirror Cover and X-Axis Motor Cover have been removed for visibility. Maintenance.

Fuel Additives. Turbo 108 Fuel Injector Cleaner. Turbo 108 Octane Boost 16 oz & 32 oz.

Brochure Car Wash Chemicals. Nano for Everyone!!

TOYOTA SUPRA JZA80 HEADLIGHT LENS TUTORIAL

Harley-Davidson Dyna saddlebags installation guide

SERVICE BULLETIN. Č: SB-B_SD ENG Date: 03.JUL 2017 Revision: - Date: - Number of pages: 1 + (7, 1) TOMARK, s.r.o. Strojnícka Prešov

3M Automotive Aftermarket 3M Paint Finishing Solutions.

Soiled Leather Seats? Clean Them First Before Thinking Replacement. Removing Aged Wrap Guard or Clear Guard. Nov 2008

10 Critical Paint Meter Mistakes That Cost Unsuspecting Car Dealers A Fortune

BUFFER/POLISHER SYSTEM

Brake master cylinder replacement

MINNESOTA S CHEVELLE AND EL CAMINO CLUB

FACTS ABOUT WATERPROOF RC PRODUCTS

INSTALLATION GUIDE PARTS INCLUDED LED LIGHTS INCLUDED HARDWARE INCLUDED TOOLS REQUIRED PAGE 1 FIG 1 FIG FORD F-150 KING RANCH, & PLATINUM

Wench With a Wrench. By Gail Wagner. A Shocking Discussion. Should I or Shouldn t I? That is The Question

Service Packages Prices (All packages may be costumized upon request)

RF81 Finish Defects. Copyright 1999 Inter-Industry Conference On Auto Collision Repair v.4.0

Some tips and tricks I learned from getting clutch out of vehicle Skoda Octavia year 2000

Shay - Painting The Trucks & Frames

INSTALLATION INSTRUCTIONS UNDERMOUNT SINKS

SURFACE CARE GUIDE Table of Contents

TURTLE WAX CERAMIC PAINT PROTECTION

Troubleshooting Guide for Limoss Systems

Cleaning, Maintenance and Repair

March 2018 Newsletter

THE LAB ZONE CLEAN / POLISH / PROTECT PRIVATE LABEL PRODUCTS

User s Guide MODEL 1000 ULTIMATE DETAILING MACHINE

PLEASE READ CAREFULLY AND COMPLETELY BEFORE BEGINNING THIS INSTALLATION, you will find many helpful hints in the instructions.

ALLOY WHEEL. Installation Instructions PLEASE READ ALL INSTRUCTIONS BEFORE INSTALLING WHEELS

Productline Exterior. March For internal use only. MSDS: Daimler AG GSP/BPM D Stuttgart

Chemical Price List Effective

Detailing Hand Book. Provided By, Written By, Michael (MikeyC) Cohen

AUTOMOTIVE DETAILING

New products at a glance

/ GMC SIERRA 2500 / 3500 START HERE BEFORE YOU BEGIN STEP 2

Service Bulletin INFORMATION

SAFETY. Copyright 2001 DaimlerChrysler Motors Corporation

Take care of your equipment

MGB V8 Roadster restoration project Report 97

START HERE FRONT BUMPER REMOVAL. 1) Turn off engine and chalk tires with stop block. Open Hood. Disconnect Battery.

Flute / Piccolo Care Daily Care Monthly Care Yearly Care

We all put our heads together to try and determine what the facts were. They were as follows:

START UP INSTRUCTIONS

New products at a glance

Corrado Club of Canada. VR6 Engine FAQ. By: Dennis

PROFESSIONAL RANDOM ORBITAL

Transcription:

Club Events April 25 th at 2:00 PM at the Sharonville Car Show May 16 th at 2:00 PM at Quaker Steak and Lube in Beavercreek 2010 Volume 1 Keep your eye on the Tri-State Web Site for more information: http://www.chevelles.net/tristate/ Inside this Issue 1 2 3 4 Club Events President s Corner by Mike Woodford Cleaning your car properly by Jeff Thompson (article by Andy Boxall) Associated Pics By Mike Woodford President s Corner Wow 2010! 2009 was a really busy year for the club and it looks like 2010 will just as busy. We embarked on our first taste of helping to run a cruise-in for the Milford Quaker State and Lube. It was a lot of work and not a great return on our investment but that was the way that year went anyways! I will have to say the highlight was the Cavalcade of Customs (and that was really 2010). With not much more than a month or two to prepare out of a off the cuff suggestion from Secretary elect at the time Jeff Thompson we did a great job. It was a lot of teamwork and after hour dedication to pull it off but is was well worth it. I will have to admit that I was not looking forward to the worries of getting the car there, getting time off and driving there everyday but it was way more fun than I could have imagined. So much so I can't wait until next year. See pics at bottom. Come on SPRING! By now you Guys and Gals should be in spring mode - thinking about getting those Chevelles out to cruise-ins and car shows but before you go the car has to be.. WHAT!!!!!! >>>>>>>> CLEANED <<<<<<<< Now if you have it made like our fearless leader Mike, he just gets Tanya to cleans his. Or if you lucky and Linds is around (Paul Wiley 's wife), she will have your car cleaned before you turn around. The rest of us will need help and this is what this article written by Andy Boxall is about. A Simple Guide to Cleaning Your Car Properly By Andy Boxall The simplest way to clean your car is to visit the car wash, pay for your ticket, wash and then drive away. Of course, if this were also the best way, then this would be a very short guide indeed. Washing your car at an automated car wash should only be done as an absolute last resort, as it is a one-stop shop for damaging the delicate paint on your car. Tech Tips Cleaning your car properly By Jeff Thompson Imagine that your cars paintwork is the skin on your face. Then imagine what your face would look like if, every time you washed it, you used the cheapest soap, applied it with a bottle cleaning.......................

brush from the kitchen, rinsed with cold water and dried it using your hair dryer. Chances are it would rarely look its best! To keep your car looking its best, the most preferable way to clean it is by hand. Far from being boring or hard work, washing your car this way can actually be very therapeutic, the repeated motions almost acting as a meditation and when done properly, the results can be very satisfying. There are a few supplies the dedicated car washer needs before commencing though. Washing First you need buckets, not just one, but two. Then you need a decent car wash product such as Meguiars, AutoGlym or Poorboys. Under no circumstances should you use washing-up liquid as this contains ingredients that attack the shiny topcoat of your paint and will, over time, make it dull. Your first bucket should be filled with hot or cold water (it makes no difference except to your hands) and the recommended amount of cleaning product. Your second bucket should be filled with plain water and will be used to rinse out the applicator, ensuring that you don t contaminate your wash mixture with dirt. Traditionally, the humble yellow sponge would be dunked into the wash bucket, but for the best results, a wash mitt should be used. The reason for this is that a sponge has a flat surface that can collect grains of dirt or specs of grit that, when rubbed across your cars bodywork, cause minute scratches and swirl marks that ruin the look of your paintwork. A wash mitt avoids this by trapping anything harmful into its deep pile of fibres and then removed when you rinse it in your second bucket. Now you are armed with your two buckets and a wash mitt, it is time to put them aside and turn your attention to preparing the car for washing. Rinse the car using a hose or buckets of water. If using a hose, the stream should be like rain on the car, rather than a strong jet of water, as this can blast dirt into the paintwork. Using a separate mitt or soft sponge, clean the wheels with an alloy wheel cleaner or some of your wash mixture and ensure that any loose dirt under the wheel arches has been removed. With the car wet, start at the top and work down with your wash mitt, remembering to rinse in the second bucket regularly. Side-to-side strokes are perfect for the washing phase and pressure should only be used on any tough spots you may come across. When you have cleaned the whole car, empty your buckets and get the hose to rinse the car off. Drying After thoroughly rinsing any soapy suds off the car, it s time to dry the paintwork. Many people ignore this step, preferring to let the car dry on its own. This is pointless as the water will dry in patches, making the car look as bad as it did before you started! Again, tradition calls for the use of a chamois leather and while they do a respectable job, there is a better item available today. The microfiber towel is far more absorbent than a chamois, making drying quick and painless. If you can find a microfiber mitt, then the drying takes mere moments, with a great finish. A different microfiber towel should be used for the wheels. Some people use a blade, similar to the ones used by window cleaners, to wipe the loose water off their car. Although they do a great job, they come with a similar danger to the sponge in that if a piece of grit is caught between the bodywork and the blade, you could find yourself with a big scratch as you drag the blade over the car. They should be fine for the windows though. Options Now we get to the optional part, a polish. Polishing your car doesn t have to be done every time you clean it, in fact it should only be done around four or five times per year. You can always tell when a car needs polishing, as the water stops beading on the paintwork when it rains or when you wash it. Depending on the age of your car, there is a step which should be inserted between drying and polishing, and that is claying. Detailing Clay Once the reserve of professional detailers only, this great product can now be found at most car care shops. In the box you get a spray bottle of lubricant and a small bar of clay (actually a mix of man made products rather than actual clay). Break off a third of the bar of clay and spray the lubricant onto your bodywork in a small patch. Then, using very little pressure, move the clay bar back and forth over the wet paint. As you do this you will feel it stick and then release; this is the clay doing its job. What it is actually doing is removing all those contaminants (tree sap, road dirt, bird droppings etc.) that regular washing won t. Doing the whole car is relatively time consuming, but what you will be left with is a car with paint as smooth and shiny as glass. If you have the time and your car is not new, then this is a very worthwhile treatment. Once the claying is done, you must polish your car as the clay will have removed any old polish that was left. Polishing Apply your polish with an applicator pad that may come with the product itself, or can be purchased separately. Again, the same brands as the car wash are recommended. Working on a small section of paintwork at one time, the best method is to use smooth, circular motions followed by back and forth to ensure good coverage. Then remove the polish with a microfiber towel, polish removal mitt or car-care cotton wool. A good polish is easy to apply, dries fairly quickly and doesn t require too much effort to remove. Finishing Touches 2........................

With your car washed, clayed and polished, chances are it looks totally different! But for it to stand out, there are a few final things to be done. First the wheel require a good buff up and a product for blackening the tires can be used, then a good glass polish will make your windows shine too. With all this done you can stand back and admire your clean car, safe in the knowledge that rather than destroy the paintwork in a car wash, you have extended its life by caring for it by hand. 3

Cavalcade of Customs January 2010 4........................

........................ 5

6........................

........................ 7