Corn Light Series Features Have a temperature protection function, if the temperature of lamp reaches 110 C, the electricity will cut off automatically to protect the whole lamp; Meanwell Driver, Wide voltage AC90-305V,High efficiency constant current drives. Use chips which achieve 110lm/w; Unique construction design with full beam angle (); Fin Magnesium heat dissipation system (patent design); Various lamp holder are available, a wide range of applications. (E26/E27/E39/E40); Could replace the conventional compact CFL, Halogen,HID, Mercury light directly. Applications Factories, Warehouses, Courtyard, Parks, Workshops, Construction Site, Subway, Gas Stations, School, Hospital, Toll Stations, Indoor Stadiums, Museums, Convention Centers, Apartments, Villas, Commercial buildings, Movie theaters, Fitness halls,etc.
Contents Special Technical Advantages of Corn Lights....3 Electrical and Photometric Specification.........4 Mechanical and Environmental Specification........4 Light Distribution..........5 Dimensions..........5 Installation.........6
Special Technical Advantages of Corn Lights Heat dissipation of the heak sink structure 1. The design of heat sink aims to fully utilize the surface area of structural parts to transfer heat to air; 2. Using magnesium alloy, which is good for heat dissioation; 3. The gaps of the cooling fin come into being convention, which is beneficial to heat dissipation; 4. This structure enables air to convect and fully pass through the gaps between modules by utilizing the honeycomb effect, thus to remove the heat rapidly. PC cover PC cover, made of Japan MITSUBISHI, which will not become yellow and not easy to be broken. Easy installation E39 or E40 holder, in consideration that the high-power lights are generally installed in higher operating environment, the operators require as few tools as possible for their convenience and security. IP65 protection It can avoid the penetration of water vapor; its silicon-rubber rings insulate LEDs with the outside environment completely, thus to eliminate any erosion to chips and PCB boards from outside. High-efficacy LED Light source It adopts Original Korea Generation 2 LED source, high luminous efficiency, low decline and long lifespan. Meanwell Driver With good quality Meanwell Driver, its PF is over than 0.95 and voltage is range from 90V to 305V, more safety in use.
Electrical and Photometric Specification Model Input Voltage (V) DC Voltage (V) Power (W) Luminous Efficacy (lm/w) Flux (lm) CCT (K) Clear Cover Milky Cover Beam Angle LED Brand CRI XTCNL-60 AC90-305V 24 60 6600±5% 6000±5% XTCNL-80 AC90-295V 24 80 8800±5% 8000±5% XTCNL-100 AC90-305V 24 100 XTCNL-120 AC90-305V 24 120 120±5 (MilkyCover) 12000±5% 10000±5% 13200±5% 12000±5% 2000K-75lm/W 2000K-70lm/W 3000K-100lm/W 3000K-95lm/W 4000K-100lm/W 4000K-95lm/W 5000K-110lm/W 5000K-100lm/W 6000K-110lm/W 6000K-100lm/W K-110lm/W K-100lm/W XTCNL-150 AC90-305V 24 150 120±5 13200±5% 12000±5% XTCNL-180 AC90-305V 24 180 19800±5% 18000±5% Note: External Meanwell Driver Mechanical and Environmental Specification Model Working Environment Storage Temperature Lumen Maintence (h) Housing Material Surge Protection THD Power Factor Power Efficiency N.W (kg) Without Driver Driver Type XTCNL-60 89% 0.9 LPF-60-24 XTCNL-80 91% 1.0 CEN-100-24 XTCNL-100 93% 1.1 H-100-24 XTCNL-120-40 ~+60, Magnesium -40 ~+80 >40000 20%~95%RH Alloy 4KV <15% >0.95 93% 1.1 H-120-24 XTCNL-150 93% 1.2 H-150-24 XTCNL-180 93% 1.2 H-185-24 XTCNL-200 93% 1.2 H-240-24
Light Distribution 100W 180W Dimensions XTCNL-60 XTCNL 80W 100W 120W 150W 180W
Installation 60W and 80W 100W 120W 150W 180W Step 1: Install the corn light to E39/E40 holes on the bracket; Step 2: Connect the wires to Meanwell driver and then connect the AC wires;