Technical data Patio awnings Valid from 01.03.2017
WAREMA patio awnings for individual sun protection WAREMA awnings are an eye-catching feature for any building. The large choice of designs, colours and fabrics make any individual solution possible. Whether it is the model of a cassette awning, an open or half-closed articulated arm awning design your awning according to your requirements. And when it comes to operation you also have the choice: from manual operation through to an exclusive comfort control. 2
100% quality WAREMA stands for quality. We rely on high-grade materials and first-class processing. Authorised, extensively trained WAREMA dealers offer individual advice and will develop the best solution for your requirements and wishes together with you. Qualified advice, competent planning, reliable mounting and customer-oriented service services that you can rely on from your WAREMA dealer. 3
Perfect atmosphere Integrated lighting Your benefits: Longer summer evenings outside with a pleasant atmosphere Pleasant, warm light through the use of LED lamps Low energy consumption thanks to LED technology The light can be dimmed in steps using the WMS dimmer (LED) Comfortable operation with the WMS hand-held transmitter or by smartphone using WMS WebControl LED stripes in the front profile and cassette LED stripes in the front profile 4
Control systems Sun shading system automatically in perfect position EWFS Standardised WAREMA Radio System The standardised WAREMA radio system offers you the opportunity to control the individual sun shading drive or light with a minimum amount of installation work. The uniform system allows individual expansion of the control system and leaves room for retrofitting further components at any time. WAREMA supplies the appropriate EWFS solution for the different control requirements of any sun shading product. Awnings for example can be controlled with permanent mode. WMS WAREMA Mobile System Radio systems are particularly beneficial with retrofittings because no additional line routing is required. In the WAREMA Mobile System the only components needed are the transmitter and receiver. Users receive feedback about all move commands of their sun shading systems. Distant units can also be reached by transmitting commands from receiver to receiver (routing function). WMS WebControl Simple, comfortable and self-explanatory the control of your awning via smartphone. Thanks to the intuitive user interface you can use your smartphones, tablets or computers to move your sun shading system with only a few steps into the correct position or to request their current position. Immerse into a completely new form of sun protection automation.
Fabrics and frame colours Timeless colour brilliance Fabrics The acrylic awning fabrics are the classics among the fabric qualities and impress by experience and constant further development. They consist of 100 % brand acrylic fabric for which the fibres of the yarns used are spinning nozzle dyed. Furthermore the innovative Lumera Acrylic fabrics have an extremely smooth surface which makes colours appear much deeper and increases brilliance for a long time. Acrylic awning fabrics provide reliable protection against harmful UV radiation and they are also extremely tear-resistant. Frame colours Immerse yourself in the colours of WAREMA and design your awning according to your personal taste. The colours of the extensive WAREMA Colour World provide a selection of frame colours which are harmoniously adapted to the selected fabric and the individual living style. They impress by a durable coating quality which corresponds to the directive GSB-AL 631. Thanks to the fine surface structure water rolls off very easily and removes dirt particles at the same time. Select your favourite colour from the WAREMA Colour World chart. Collection guide Let yourself be inspired when making a decision on the fabric collection. Choose your preferred design with your favourite colours in our online collection guide at www.markisen-kollektion.de. The extensive selection of the WAREMA awnings collection satisfies all wishes. 6
Articulated arm awning half-closed Type H60 The function and design of the half-closed WAREMA H60 articulated arm awning will convince you. Thanks to the additional rain hood and the optional fabric bearing shell, the curtain is protected from rain and weather influences. The LED stripes, which can be integrated on request in the front profile of the awning, create a pleasant atmosphere in the evening. Your benefits: Modern design with many design options Functionality to the last detail Good protection for the fabric thanks to the rain hood Brilliant accessories (optional): Integrated LED stripes in the front profile, radiant heater, valance roller blind, patio side screen, patio frame, LB model, turning gear Technical details Articulated arm awning H60 Articulated arm awning H60 Accessories: LED stripes in the front profile Max. width individual unit 7000 Max. width coupled unit 13000 Max. projection 4000 Max. inclination angle (degree) 45 Operation Crank optional Motor standard Radio motor optional Solar drive optional Fabric bearing shell optional Integrated LED stripes optionally in the front profile Recommended control WMS comfort control WAREMA Colour World standard 7
Description 1 3 2 4 7.3 10 9 7.2 7.1 5 6 5 8 7.4 70380_1 fig. 34: Articulated arm awning H60 1 3 2 4 7.3 7.2 7.1 6 5 10 9 8 5 7.4 70382_1 fig. 35: Articulated arm awning H60 LB 1 Rain hood 2 Console 3 Fabric shaft 4 Fabric shaft console 5 Side covers 6 Bearing tube 7 Articulated arm 7.1 Articulated arm seat 7.2 Articulated arm profile 7.3 Centre joint 7.4 Front rail seat 8 Front rail 9 Fabric 10 Valance
Description Overview Application Large-area sun shading to screen balconies and patios. Independent mounting due to integrated rain hood, offering protection from rain and dirt from above. Optionally available with valance roller blind or as LB model for large projection with narrow width. Operation Basic motor, 230 V, 50 Hz Orea WT with electronic limit switch-off (optionally with EWFS/WMS Plug receiver) EWFS radio motor, 230 V, 50 Hz (optionally) W-MM with electronic limit switch-off WMS radio motor, 230 V, 50 Hz (optionally) WMS-MM with electronic limit switch-off More information about drives from page 309. Crank Bevel gear with eyelet and free wheel at the lower limit point Ratio: 4.4:1 Crank lengths: 800/1000/1200/1400/1600/1800/ 2000 mm Crank only for individual units. Rain hood ( Material: Surface: aluminium, extruded powder-coated Console (2) Wall and ceiling installation Material: aluminium, extruded Surface: powder-coated Rafter installation Material: aluminium Surface: powder-coated Fabric shaft (3) Material: steel, galvanised Material thickness: 1 mm Dimensions (Ø): 85 mm Profile: groove tube Surface: plain Fabric shaft console (4) Material: aluminium, extruded Surface: powder-coated Side covers (5) for front rail and fabric shaft cover Material: aluminium Colour: powder-coated Bearing tube (6) Material: steel, galvanised Material thickness: 2 mm Dimensions (WxH): 40 x40 mm Profile: square Surface: powder-coated Articulated arm (7) Articulated arm seat (7. Tilting joint with windlock mechanism Material: aluminium, extruded and drop-forged Surface: powder-coated For type H60 LB height offset on the non-drive end. Articulated arm profile (7.2) with two internal tension springs with integrated slide and swinging protection Material: aluminium, extruded Dimensions (WxH): front 33 x 61 mm rear 35 x 68 mm Surface: powder-coated Centre joint (7.3) Material: aluminium, drop-forged Bolts: stainless steel, in Teflon bushings Power transmission: alternatively steel cable (minimum tensile strength of cable over 1 tonne, standard), link chain (with wear-resistant corrud coating), optional segment, aluminium, extruded Surface: powder-coated Front rail seat (7.4) Material: aluminium, extruded Dimensions (WxH): 125 x95 mm Surface: powder-coated For type H60 LB height offset on the non-drive end. Front rail (8) Material: Dimensions (Ø): Surface: aluminium, extruded 70 mm with valance roller blind 90 mm with aluminium valance (WxH) 90 x 185 mm (optional) powder-coated Articulated arm/ cassette awnings Pergola awnings Patio side screens Conservatory awnings Accessories Horizontal awnings Sun sails/fabrics Drives/control systems
Description Fabric (9) Fabric qualities: Designs: Standard/Lumera acrylic fabric Acrylic Perfora/All Weather Soltis 92 fabric Lacquered fabric More information about the fabrics on page 300 according to current WAREMA awning collection Special fabrics not included in our current awning collection are only available upon request and at a surcharge. Valance (10) The valance is individually removable and available in 6 shapes, see page 305. If no shape is stated we will supply valance shape no. 11. Type H60 Dimensions (H): approx. 180 mm Type H60 LB Dimensions (H): approx. 270 mm Optional: valance roller blind, see page 257. Inclination angle adjustment Type H60 Continuously adjustable Inclination angle: 5 45 Standard: 10 Resistance to water collection, class 2, from inclination angle of 14. Fine adjustment of inclination angle during mounting. Tolerance depending on projection ±5. Optional: turning gear, page 255. Type H60 LB Inclination angle: 5 20 Tolerance depending on projection ±5. Turning gear not possible. Weight 16 18 kg/m without consoles, depending on fitted equipment Colours Powder coating of aluminium parts with chrome-free pretreatment according to valid RAL CLASSIC colour chart (except camouflage and luminous colours) or in six DB colours as well as eight textured colours (W4914 W492, four anodised-look colours (WC31 WC34) and further colours according to the WAREMA Colour World (in WAREMA colour specification). Other colour specifications and special colours are available on request at a surcharge. Accessories See page 251.
Construction limit values Overview Construction limit values in mm for wall and ceiling installation on concrete/rafter installation (consoles A, E, F) Type H60 Individual unit Projection 1500 2000 2500 3000 3500 4000 Max. width Articulated arm awning with motor 7000 7000 7000 7000 7000 7000 Articulated arm awning with crank 6500 6500 6500 6500 6500 6500 with turning gear 6500 6500 6500 6500 6000 with turning gear and valance roller 6500 6500 6500 5500 4500 blind with valance roller blind 7000 7000 7000 7000 7000 Fabric types Acrylic all qualities 7000 7000 7000 7000 7000 7000 Lacquered fabric 5500 5500 5500 Soltis 92 fabric 5500 5500 5500 Min. width with crank 1910 2430 2930 3440 4220 4730 with motor 1870 2390 2890 3400 4180 4690 with turning gear and crank 2160 2680 3180 3690 4470 with turning gear and motor 2110 2630 3130 3640 4420 Not possible when using a fabric bearing shell and with valance roller blind! Type H60 Group unit/2 sections with slit cover blind - only possible with motor Projection 1500 2000 2500 3000 3500 4000 Max. width Articulated arm awning 13500 13500 13500 13500 13500 13500 with turning gear with turning gear and valance roller blind with valance roller blind 13500 13500 13500 13500 13500 Fabric types Acrylic all qualities 13500 13500 13500 13500 13500 13500 Lacquered fabric Soltis 92 fabric Min. width with motor 4598 5638 6638 7658 8948 9968 Not possible when using a fabric bearing shell and with valance roller blind! Type H60 LB Individual unit Projection 1500 2000 2500 3000 3500 4000 Max. width Articulated arm awning 1900 2420 2920 3430 4210 4720 with valance roller blind 1900 2420 2920 3430 4210 Fabric types Acrylic all qualities 1900 2420 2920 3430 4210 4720 Lacquered fabric 1900 2420 2920 Soltis 92 fabric 1900 2420 2920 Min. width with crank 1211 1471 1721 1976 2231 2756 with motor 1171 1431 1681 1936 2191 2716 Not possible when using a fabric bearing shell and with valance roller blind! The minimum sizes, number of consoles, console positions and pull-out forces indicated in this document refer to concrete C20/25 (B25) as a substructure and mounting on rafters. You can find information on other substructures at konsolenplaner.warema.de. Notes: Group units only possible with fabric bearing shell. Mounting on rafters is only possible for individual units! Min. width differs for console type D Articulated arm/ cassette awnings Pergola awnings Patio side screens Conservatory awnings Accessories Horizontal awnings Sun sails/fabrics Drives/control systems
Fixing 80 40 40 85 17,5 50 17,5 14 KD04/0270 049 KD04/0270 048 fig. 36: Console type A wall installation G60/H60 fig. 37: Console type B - wall installation with 3 drilled holes G60/ H60 kd04/0270 050_2 kd04/0270 051 fig. 38: Console type C - wall installation with small mounting plate G60/H60 fig. 39: Console type D - wall installation with large mounting plate G60/H60 drw0001 165 220 25 25 14 93 30 165 220 25 25 93 30 210 40 130 40 25 14 40 210 285 35 40 25 40 210 285 14 125 330 125 40 35 80 159 88,5 20,5 14 25 260 104 fig. 40: Console type E ceiling installation G60/H60
Fixing Overview 30 150 30 30 100 230 (or custom made) fig. 41: Console type F rafter installation G60/H60 fig. 42: Cable exit Sun sails/fabrics Articulated arm/ cassette awnings Pergola awnings 165 Patio side screens Conservatory awnings 234 Accessories 25 ke040420224_3d_bem 70511 Horizontal awnings 45 66 fig. 43: 256 Fixing to the wall with aluminium valance 70800 Drives/control systems
Mounting options Type H60 Type H60 LB 165 234 25 244 70368 70374 fig. 44: Fixing to the wall fig. 47: Fixing to the wall 70 68 268 254 70369 70375 fig. 45: Fixing to the ceiling 268 230 (Or custom made) 165 304 25 244 70 68 254 fig. 48: Fixing to the ceiling 339 230 (Or custom made) 339 254 70370 254 70376 fig. 46: Fixing to rafter fig. 49: Fixing to rafter
Measuring instructions Overview Individual unit Order width Articulated arm/ cassette awnings B C = = C = = B GAM_single_1 Pergola awnings fig. 50: Individual unit type H60 Individual unit with turning gear C B = = Order width = C = B Patio side screens fig. 51: Coupled unit Individual unit with turning gear type H60 GAM_orient_1 Conservatory awnings B C = = Order width = = F E Total width E F Accessories The 3rd or 5th console is in the middle. Horizontal awnings Sun sails/fabrics Order width = = C B fig. 52: Coupled unit type H60 kd040550004_3 Drives/control systems
Dimensions tables for console positions on concrete Dimensional drawing for console position see page 47. Individual unit type H60 Projection Width Dimension "B" Dimension "C" Consoles Force/screw anchor Force/screw Rafter (N) from to from to from to Number Type Wall (N) Ceiling (N) 1500 2000 330 480 2 A, E, F 573 828 1519 2001 2500 355 505 2 A, E, F 679 981 1799 2501 3000 155 305 605 755 2 A, E, F 785 1135 2079 3001 3500 405 555 855 900 2 A, E, F 891 1288 2359 3501 5500 580 730 2 A, E, F 1316 1901 3480 5501 7000 580 730 3 2) A, E, F 1634 2361 4320 2000 2500 330 480 2 A, E, F 1040 1502 2753 2501 3000 345 495 2 A, E, F 1202 1737 3182 3001 3500 145 295 595 745 2 A, E, F 1364 1972 3611 3501 4000 395 545 845 900 2 A, E, F 1527 2207 4040 4001 5500 580 730 2 A, E, F 2014 2911 5327 5501 7000 580 730 3 2) A, E, F 2501 3615 3307 2500 3000 330 480 2 A, E, F 1772 2561 4692 3001 3500 345 495 2 A, E, F 2001 2892 5297 3501 4000 145 295 595 745 2 A, E, F 2230 3223 2952 4001 4500 395 545 845 900 2 A, E, F 2460 3555 3254 4501 5500 580 730 2 A, E, F 2918 4217 3860 5501 6000 580 730 3 2) A, E, F 3147 4548 4162 6001 7000 555 705 955 1105 5 2) A, E, F 2006 2899 5303 3000 3500 330 480 2 A, E, F 2665 3851 3527 3501 4000 340 490 2 A, E, F 2971 4294 3931 4001 4500 140 290 590 740 2 A, E, F 3278 4737 4336 4501 5000 365 515 765 915 4 A, E, F 1792 2590 4741 5001 5500 555 705 955 1105 4 A, E, F 2174 3142 5748 5501 7000 555 705 955 1105 5 2) A, E, F 2697 3898 7131 3500 4500 100 140 390 430 4 A, E, F 2174 3142 5751 4501 5000 110 260 510 660 4 A, E, F 2653 3834 7016 5001 5500 105 255 505 655 4 A, E, F 2879 4160 7613 5501 6000 355 505 755 905 5 2) A, E, F 3105 4487 8210 6001 6500 555 705 955 1105 5 2) A, E, F 3331 4814 8807 6501 7000 555 705 955 1105 5 2) A, E, F 3557 5140 7155 3) 4000 5000 100 140 390 430 4 A, E, F 3316 4793 8771 5001 5500 105 255 505 655 4 A, E, F 3600 5203 7223 3) 5501 6000 130 280 530 680 5 2) A, E, F 3884 5613 7760 3) 6001 6500 380 530 780 930 5 2) A, E, F 4168 6024 8296 3) 6501 7000 555 705 955 1105 5 2) A, E, F 4452 6434 8832 3) The specified data are based on a concrete mounting with a pressure-resistant substructure and rafter mounting for wind resistance class 2. Data for other substructures can be found at konsolenplaner.warema.de. With 2 consoles either dimension B or C applies (preferably dimension B). With 4 consoles, dimension B and dimension C apply. With 4 consoles, each console must be installed symmetrically to the axis of the articulated arm seat. 2) The 3rd or 5th console is in the middle. 3) Wind resistance class 1
Dimensions tables for console positions on concrete Overview Dimensional drawing for console position see page 47. Individual unit with valance roller blind type H60 Projection Width Dimension "B" Dimension "C" Consoles Force/screw anchor Force/screw Rafter (N) from to from to from to Number Type Wall (N) Ceiling (N) 1500 2000 330 480 2 A, E, F 652 943 1729 2001 2500 355 505 2 A, E, F 778 1125 2062 2501 3000 155 305 605 755 2 A, E, F 904 1307 2395 3001 3500 405 555 855 900 2 A, E, F 1030 1489 2727 3501 5500 580 730 2 A, E, F 1534 2217 4058 5501 7000 580 730 3 2) A, E, F 1912 2764 5056 2000 2500 330 480 2 A, E, F 1172 1694 3104 2501 3000 345 495 2 A, E, F 1361 1967 3603 3001 3500 145 295 595 745 2 A, E, F 1550 2240 4102 3501 4000 395 545 845 900 2 A, E, F 1739 2513 4601 4001 5500 580 730 2 A, E, F 2306 3332 3049 5501 7000 580 730 3 2) A, E, F 2873 4151 3798 2500 3000 330 480 2 A, E, F 1971 2848 5217 3001 3500 345 495 2 A, E, F 2233 3227 2955 3501 4000 145 295 595 745 2 A, E, F 2495 3606 3302 4001 4500 395 545 845 900 2 A, E, F 2758 3986 3648 4501 5500 580 730 2 A, E, F 3282 4744 4342 5501 7000 555 705 955 1105 5 2) A, E, F 2238 3234 5916 3000 3500 330 480 2 A, E, F 2943 4254 3895 3501 4000 340 490 2 A, E, F 3289 4754 4352 4001 4500 115 265 515 665 4 A, E, F 1818 2628 4809 4501 5000 365 515 765 915 4 A, E, F 1991 2878 5267 5001 5500 555 705 955 1105 4 A, E, F 2392 3458 6327 5501 7000 555 705 955 1105 5 2) A, E, F 2976 4300 7867 3500 4500 100 140 390 430 4 A, E, F 2383 3443 6303 4501 5000 110 260 510 660 4 A, E, F 2885 4169 7629 5001 5500 105 255 505 655 4 A, E, F 3134 4529 8288 5501 6000 355 505 755 905 5 2) A, E, F 3383 4889 8946 6001 7000 555 705 955 1105 5 2) A, E, F 3881 5610 8013 3) The specified data are based on a concrete mounting with a pressure-resistant substructure and rafter mounting for wind resistance class 2. Data for other substructures can be found at konsolenplaner.warema.de. With 2 consoles either dimension B or C applies (preferably dimension B). With 4 consoles, dimension B and dimension C apply. With 4 consoles, each console must be installed symmetrically to the axis of the articulated arm seat. 2) The 3rd or 5th console is in the middle. 3) Wind resistance class 1 Articulated arm/ cassette awnings Pergola awnings Patio side screens Conservatory awnings Accessories Sun sails/fabrics Horizontal awnings Drives/control systems
Dimensions tables for console positions on concrete Dimensional drawing for console position see page 47. Individual unit with turning gear type H60 Projection Width Dimension "B" Dimension "C" Individual unit with turning gear and valance roller blind type H60 Consoles Force/screw anchor Force/screw Rafter (N) from to from to from to Number Type Wall (N) Ceiling (N) 1500 2500 430 580 2 A, E, F 679 981 1799 2501 3000 200 275 575 725 2 A, E, F 785 1135 2079 3001 3500 375 525 825 900 2 A, E, F 891 1288 2359 3501 5500 550 700 2 A, E, F 1316 1901 3480 5501 6500 550 700 3 2) A, E, F 1528 2208 4040 2000 3000 430 580 2 A, E, F 1202 1737 3182 3001 3500 200 265 565 715 2 A, E, F 1364 1972 3611 3501 4000 365 515 815 900 2 A, E, F 1527 2207 4040 4001 5500 550 700 2 A, E, F 2014 2911 5327 5501 6500 550 700 3 2) A, E, F 2339 3380 3093 2500 3500 430 580 2 A, E, F 2001 2892 5297 3501 4000 200 265 565 715 2 A, E, F 2230 3223 2952 4001 4500 365 515 815 900 2 A, E, F 2460 3555 3254 4501 5500 550 700 2 A, E, F 2918 4217 3860 5501 6000 550 700 3 2) A, E, F 3147 4548 4162 6001 6500 555 705 955 1105 5 2) A, E, F 1876 2712 4961 3000 4000 430 580 2 A, E, F 2971 4294 3931 4001 4500 200 260 560 710 2 A, E, F 3278 4737 4336 4501 5000 365 515 765 915 4 A, E, F 1792 2590 4741 5001 5500 555 705 955 1105 4 A, E, F 2174 3142 5748 5501 6500 555 705 955 1105 5 2) A, E, F 2523 3646 6670 3500 4500 200 270 520 590 4 A, E, F 2174 3142 5751 4501 5000 200 260 510 570 4 A, E, F 2653 3834 7016 5001 5500 200 255 505 560 4 A, E, F 2879 4160 7613 5501 6000 355 505 755 905 5 2) A, E, F 3105 4487 8210 Projection Width Dimension "B" Dimension "C" Consoles Force/screw anchor Force/screw Rafter (N) from to from to from to Number Type Wall (N) Ceiling (N) 1500 2500 430 580 2 A, E, F 778 1125 2062 2501 3000 200 275 575 725 2 A, E, F 904 1307 2395 3001 3500 375 525 825 900 2 A, E, F 1030 1489 2727 3501 5500 550 700 2 A, E, F 1534 2217 4058 5501 6500 550 700 3 2) A, E, F 1786 2581 4723 2000 3000 430 580 2 A, E, F 1361 1967 3603 3001 3500 200 265 565 715 2 A, E, F 1550 2240 4102 3501 4000 365 515 815 900 2 A, E, F 1739 2513 4601 4001 5500 550 700 2 A, E, F 2306 3332 3049 5501 6000 550 700 3 2) A, E, F 2495 3605 3299 6001 6500 550 700 3 2) A, E, F 2684 3878 3548 2500 3500 430 580 2 A, E, F 2233 3227 2955 3501 4000 200 265 565 715 2 A, E, F 2495 3606 3302 4001 4500 365 515 815 900 2 A, E, F 2758 3986 3648 4501 5500 550 700 2 A, E, F 3282 4744 4342 5501 6500 555 705 955 1105 5 2) A, E, F 2092 3023 5531 3000 4000 430 580 2 A, E, F 3289 4754 4352 4001 4500 200 265 515 580 4 A, E, F 1818 2628 4809 4501 5000 365 515 765 915 4 A, E, F 1991 2878 5267 5001 5500 555 705 955 1105 4 A, E, F 2392 3458 6327 3500 4500 200 270 520 590 4 A, E, F 2383 3443 6303 The specified data are based on a concrete mounting with a pressure-resistant substructure and rafter mounting for wind resistance class 2. Data for other substructures can be found at konsolenplaner.warema.de. With 2 consoles either dimension B or C applies (preferably dimension B). With 4 consoles, dimension B and dimension C apply. With 4 consoles, each console must be installed symmetrically to the axis of the articulated arm seat. 2) The 3rd or 5th console is in the middle.
Dimensions tables for console positions on concrete Overview Dimensional drawing for console position see page 47. Type H60 LB Projection Width Dimension "B" Type H60 LB with valance roller blind Dimension "C" Consoles Force/screw anchor Force/screw Rafter (N) from to from to from to Number Type Wall (N) Ceiling (N) 1500 1500 330 480 2 A, E, F 467 675 1239 1501 1900 100 215 515 665 2 A, E, F 573 828 1519 2000 1500 330 480 2 A, E, F 715 1033 1896 1501 2000 385 535 2 A, E, F 877 1268 2324 2001 2420 185 335 635 785 2 A, E, F 1040 1502 2753 2500 2000 330 480 2 A, E, F 1314 1898 3481 2001 2500 100 210 510 660 2 A, E, F 1543 2229 4086 2501 2920 310 460 760 900 2 A, E, F 1772 2561 4692 3000 2000 330 480 2 A, E, F 1746 2523 4624 2001 2500 380 530 2 A, E, F 2052 2966 5434 2501 3000 180 330 630 780 2 A, E, F 2358 3409 3122 3001 3430 430 580 880 900 2 A, E, F 2665 3851 3527 3500 2500 100 140 390 430 4 A, E, F 1386 2002 3669 2501 3000 100 180 430 510 4 A, E, F 1583 2287 4189 3001 3500 150 300 550 700 4 A, E, F 1780 2572 4710 3501 4000 400 550 800 950 4 A, E, F 1977 2857 5231 4001 4210 555 705 955 1105 4 A, E, F 2174 3142 5751 4000 3000 100 140 390 430 4 A, E, F 2180 3151 5769 3001 3500 100 190 440 530 4 A, E, F 2464 3561 6520 3501 4000 290 440 690 840 4 A, E, F 2748 3972 7270 4001 4500 540 690 940 1090 4 A, E, F 3032 4382 8020 4501 4720 555 705 955 1105 4 A, E, F 3316 4793 8771 Projection Width Dimension "B" Dimension "C" Consoles Force/screw anchor Force/screw Rafter (N) from to from to from to Number Type Wall (N) Ceiling (N) 1500 1500 330 480 2 A, E, F 527 761 1397 1501 2000 100 215 515 665 2 A, E, F 652 943 1729 2000 1500 330 480 2 A, E, F 794 1148 2106 1501 2000 385 535 2 A, E, F 983 1421 2605 2001 2500 185 335 635 785 2 A, E, F 1172 1694 3104 2500 2000 330 480 2 A, E, F 1446 2090 3831 2001 2500 100 210 510 660 2 A, E, F 1708 2469 4524 2501 3000 310 460 760 900 2 A, E, F 1971 2848 5217 3000 2000 330 480 2 A, E, F 1905 2753 5045 2001 2500 380 530 2 A, E, F 2251 3253 2980 2501 3000 180 330 630 780 2 A, E, F 2597 3753 3437 3001 3500 430 580 880 900 2 A, E, F 2943 4254 3895 3500 2500 100 140 390 430 4 A, E, F 1502 2170 3975 2501 3000 100 180 430 510 4 A, E, F 1722 2488 4557 3001 3500 150 300 550 700 4 A, E, F 1942 2807 5139 3501 4000 400 550 800 950 4 A, E, F 2162 3125 5721 4001 4500 555 705 955 1105 4 A, E, F 2383 3443 6303 The specified data are based on a concrete mounting with a pressure-resistant substructure and rafter mounting for wind resistance class 2. Data for other substructures can be found at konsolenplaner.warema.de. With 2 consoles either dimension B or C applies (preferably dimension B). With 4 consoles, dimension B and dimension C apply. With 4 consoles, each console must be installed symmetrically to the axis of the articulated arm seat. Articulated arm/ cassette awnings Pergola awnings Patio side screens Conservatory awnings Accessories Horizontal awnings Sun sails/fabrics Drives/control systems
Dimensions tables for console positions on concrete Dimensional drawing for console position see page 47. Coupled unit with slit cover blind type H60 Projection Width Dimension "B" Dimension "C" Dimension "E" Dimension "F" Consoles from to from to from to from to from to Number Type Wall (N) Force/screw anchor The specified data are based on a concrete mounting with a pressure-resistant substructure for wind resistance class 2. Data for other substructures can be found at konsolenplaner.warema.de. With 2 consoles either dimension B or C applies (preferably dimension B). With 4 consoles, dimension B and dimension C apply. With 4 consoles, each console must be installed symmetrically to the axis of the articulated arm seat. 2) The 3rd or 5th console is in the middle. Ceiling (N) 1500 2500 330 480 735 885 2 A, E 679 981 2501 3000 100 175 475 625 735 885 2 A, E 785 1135 3001 3500 405 555 855 900 405 555 855 900 2 A, E 891 1288 3501 5500 580 730 580 730 2 A, E 1316 1901 5501 7000 580 730 580 730 3 2) A, E 1634 2361 2000 3000 330 480 735 885 2 A, E 1202 1737 3001 3500 100 155 455 605 735 885 2 A, E 1364 1972 3501 4000 395 545 845 900 395 545 845 900 2 A, E 1527 2207 4001 5500 580 730 580 730 2 A, E 2014 2911 5501 7000 580 730 580 730 3 2) A, E 2501 3615 2500 3500 330 480 735 885 2 A, E 2001 2892 3501 4000 100 155 455 605 735 885 2 A, E 2230 3223 4001 4500 395 545 845 900 395 545 845 900 2 A, E 2460 3555 4501 5500 580 730 580 730 2 A, E 2918 4217 5501 6000 580 730 580 730 3 2) A, E 3147 4548 6001 7000 555 705 955 1105 555 705 955 1105 5 2) A, E 2006 2899 3000 4000 330 480 735 885 2 A, E 2971 4294 4001 4500 100 145 445 595 735 885 2 A, E 3278 4737 4501 5000 365 515 765 915 410 515 765 870 4 A, E 1792 2590 5001 5500 555 705 955 1105 555 705 955 1105 4 A, E 2174 3142 5501 7000 555 705 955 1105 555 705 955 1105 5 2) A, E 2697 3898 3500 4500 100 140 390 430 410 410 660 660 4 A, E 2174 3142 4501 5000 100 110 360 370 410 410 660 660 4 A, E 2653 3834 5001 5500 100 140 390 430 410 410 660 660 4 A, E 2879 4160 5501 6000 355 505 755 905 410 505 755 850 5 2) A, E 3105 4487 6001 7000 555 705 955 1105 555 705 955 1105 5 2) A, E 3557 5140 4000 5500 100 140 390 430 410 410 660 660 4 A, E 3600 5203 5501 6000 100 150 400 450 410 410 660 660 5 2) A, E 3884 5613 6001 6500 380 530 780 930 410 530 780 900 5 2) A, E 4168 6024
Dimensions tables for console positions on concrete Overview Dimensional drawing for console position see page 47. Coupled unit with slit cover blind and valance roller blind type H60 Projection Width Dimension "B" Dimension "C" Dimension "E" Dimension "F" Consoles from to from to from to from to from to Number Type Wall (N) Force/screw anchor The specified data are based on a concrete mounting with a pressure-resistant substructure for wind resistance class 2. Data for other substructures can be found at konsolenplaner.warema.de. With 2 consoles either dimension B or C applies (preferably dimension B). With 4 consoles, dimension B and dimension C apply. With 4 consoles, each console must be installed symmetrically to the axis of the articulated arm seat. 2) The 3rd or 5th console is in the middle. Ceiling (N) 1500 2500 330 480 735 885 2 A, E 778 1125 2501 3000 100 175 475 625 735 885 2 A, E 904 1307 3001 3500 405 555 855 900 405 555 855 900 2 A, E 1030 1489 3501 5500 580 730 580 730 2 A, E 1534 2217 5501 7000 580 730 580 730 3 2) A, E 1912 2764 2000 3000 330 480 735 885 2 A, E 1361 1967 3001 3500 100 155 455 605 735 885 2 A, E 1550 2240 3501 4000 395 545 845 900 395 545 845 900 2 A, E 1739 2513 4001 5500 580 730 580 730 2 A, E 2306 3332 5501 7000 580 730 580 730 3 2) A, E 2873 4151 2500 3500 330 480 735 885 2 A, E 2233 3227 3501 4000 100 155 455 605 735 885 2 A, E 2495 3606 4001 4500 395 545 845 900 395 545 845 900 2 A, E 2758 3986 4501 5500 580 730 580 730 2 A, E 3282 4744 5501 7000 555 705 955 1105 555 705 955 1105 5 2) A, E 2238 3234 3000 4000 330 480 735 885 2 A, E 3289 4754 4001 4500 100 120 370 390 410 410 660 660 4 A, E 1818 2628 4501 5000 365 515 765 915 410 515 765 870 4 A, E 1991 2878 5001 5500 555 705 955 1105 555 705 955 1105 4 A, E 2392 3458 5501 7000 555 705 955 1105 555 705 955 1105 5 2) A, E 2976 4300 3500 4500 100 140 390 430 410 410 660 660 4 A, E 2383 3443 4501 5000 100 110 360 370 410 410 660 660 4 A, E 2885 4169 5001 5500 100 140 390 430 410 410 660 660 4 A, E 3134 4529 5501 6000 355 505 755 905 410 505 755 850 5 2) A, E 3383 4889 6001 7000 555 705 955 1105 555 705 955 1105 5 2) A, E 3881 5610 Articulated arm/ cassette awnings Pergola awnings Patio side screens Conservatory awnings Sun sails/fabrics Horizontal awnings Accessories Drives/control systems
e u ne 6 Plane Tree Avenue Dingley Village VIC 3172 T. +61 3 9558 3006 e e u ne 7 een e e e u