ER48D Range Page Description Page Description Cooktop Assembly Oven Parts (Diag. ) 3 Cooktop Parts Exterior Components 4 Burners and Tubes 3 Exterior Parts 5 Manifold Assembly 4 Door Assembly (Right) 6 Manifold Parts 5 Door Parts (Right) 7 Control Panel Assy 6 Door Assembly (Left) 8 Control Panel Parts 7 Door Parts (Left) 9 Oven Assy (Diag. ) 8 Base Assembly 0 Oven Assy (Diag. ) 9 Misc. Parts, Fasteners IMPORTANT: This model is not approved for field conversions from one gas type to another and from one altitude setting to another. Revised 07-08-04
ER48D Cooktop Assembly Page
ER48D Cooktop Parts Item Part # Description 3 4 007-0 KNOB, BLACK, RF, RR, LF, LR 05374-0 KNOB, METALLIC, RF, RR, LF, LR 007-0 KNOB, BLACK, CF, CR 05374-0 KNOB, METALLIC, CF, CR Fasteners Required (Quantity) Part # 008CH END CAP, CHROME ( PER UNIT) () 0505 008CP END CAP, COPPER ( PER UNIT) () 0505 008BC END CAP, BLACK CHROME ( PER UNIT) () 0505 008BR END CAP, BRASS ( PER UNIT) () 0505 00CH TRIM RING, CHROME (6 PER UNIT) (3) 8357 00CP TRIM RING, COPPER (6 PER UNIT) (3) 8357 00BC TRIM RING, BLACK CHROME (6 PER UNIT) (3) 8357 00BR TRIM RING, BRASS (6 PER UNIT) (3) 8357 5 00699 BURNER CAP, 8.5K STACK BURNER ( PER UNIT) 6 00699 BURNER RING, 8.5K STACK BURNER ( PER UNIT) 7 00696 BURNER BASE ASSEMBLY 8.5K STACK BURNER ( PER UNIT) () 700007 8 700493 3 BURNER CAP, 6K STACK BURNER ( PER UNIT) 9 700493 3 BURNER RING, 6K STACK BURNER ( PER UNIT) 0 0070 BURNER BASE ASSEMBLY 6K STACK BURNER ( PER UNIT) () 700007 00703 4 BURNER CAP, 8K CROWN BURNER ( PER UNIT) 00703 4 BURNER RING, 8K CROWN BURNER ( PER UNIT) 3 00703 4 BURNER HEAD, 8K CROWN BURNER ( PER UNIT) 4 700 5 THREAD RING, KIT 5 700038 GRATE 4 (3 PER UNIT) 6 00835 SIDE TRIM, SPILL TRAY, CHROME ( PER UNIT) (3) 83708 7 00837 FRONT/REAR TRIM, SPILL TRAY, CHROME ( PER UNIT) (5) 83708 8 00007-0BP SPILL TRAY, LEFT 9 00007-0BP SPILL TRAY, CENTER 0 00007-03BP SPILL TRAY, RIGHT 00836BP PORCELAIN TRIM, SPILL TRAY ( PER UNIT) 6696 6 KIT, GRATE SUPPORT PAD, SERV 3 70045 GASKET, DUAL BURNER, GRAPHITE See fasteners page for description Part number 00699 is a kit containing this part. Kit contains burner ring and burner cap. 3 Part number 700493 is a kit containing this part. Kit contains burner ring and burner cap. 4 Part number 00703 is a kit containing this part. Kit contains burner ring, burner cap and burner head. 5 Part number 700 is a kit containing this part. Kit contains set of 4 thread rings. 6 Part number 6696 is a kit containing this part. Kit contains set of 4 support pads. Page 3
ER48D Burners and Tubes Item NG Part # LP Part # NGH Part # LPH Part # Description 700067 700346 700499-0 700499-0 ASSY, INJECTOR HOLDER, 8.5K 700068 700348 700500-0 700500-0 ASSY, INJECTOR HOLDER, 6K 3 700066 700345 700498-0 700498-0 ASSY, INJECTOR HOLDER, 8K 4 70045 70045 70045 70045 GASKET, DUAL BURNER, GRAPHITE 5 70005 70005 70005 70005 O-RING, 6K BURNER 6 700036 700036 700036 700036 O-RING, 8.5K BURNER 7 00580 00580 00580 00580 FLEX TUBING, 3/6 x 8 8 00579 00579 00579 00579 FLEX TUBING, 5/6 x 8 9 00578 00578 00578 00578 FLEX TUBING, 5/6 x 9.5 0 00788 00788 00788 00788 FLEX TUBING, 3/6 x 3 00785 00785 00785 00785 FLEX TUBING, 5/6 x 4 00900 00900 00900 00900 FLEX TUBING, 3/6 x 6 3 06087 06087 06087 06087 IGNITER KIT, 8.5K/6K 4 06088 06088 06088 06088 IGNITER KIT, 8K 5 03798 03798 03798 03798 BRACKET, ISOLATOR 6 83538 83538 83538 83538 NYLON, PCB SUPPORT 7 0604 0604 0604 0604 BOARD, LED ISOLATOR 8 0608 0608 0608 0608 SHIELD, LED ISOLATOR Page 4
ER48D Manifold Assembly Page 5
ER48D Manifold Parts Item NG Part # LP Part # Description 0060 0060 WIRING HARNESS COOKTOP 06005 06005 WIRING HARNESS COOKTOP 00595 3 00595 3 IGNITER WIRE 3 7066/7067 5 7066/7067 5 LED Kit 5 4 70067 70067 ASSY, INLET, MAIN MANIFOLD 5 7634 7634 IGNITER MODULE 6 0090 0090 INSULATION, SINGLE POINT IGNITER 7 0563 0563 SCREW, VALVE MOUNTING 8 0564 0564 WASHER, VALVE MOUNTING 9 056 056 WASHER, VALVE MOUNTING 0 700494-0 4 700494-03 4 ASSEMBLY, MANIFOLD, LH 700494-0 4 700494-04 4 ASSEMBLY, MANIFOLD, RH 056-0 056-06 VALVE, 8.5K, LR 3 056-03 056-08 VALVE, 8K, LF/RF 4 056-0 056-07 VALVE, 6K, CR 5 056-05 056-0 VALVE, 6K, CF 6 056-04 056-09 VALVE, 8.5K, RR 7 00653 00965 REGULATOR 3/4 8 03789 03789 SWITCH, SPARK (not shown) - 790 790 HOLDER, BLUE LIGHT (not shown) - 03757 03757 RETAINING RING (not shown) - 0600 0600 WIRING HARNESS, 5 VDC (not shown) Use with Rev. A-C for ER48D/NG and ER48D/LP models. Use with Rev. A-D for ER48D/NG/H and ER48D/LP/H models. Use with Rev. D and above for ER48D/NG and ER48D/LP models. Use with Rev. E and above for ER48D/NG/H and ER48D/LP/H models. 3 Part number 00595 is a kit containing 6 wires, cut to the correct lengths to accommodate all 6 burners. 4 May be ordered only with RTM approval. Serial number required. Cannot be ordered to convert range to a different fuel. 5 Use kit P/N 7066 for units before serial number F-C-0340006. Use kit P/N 7067 for units after serial number F-C-0340006 (includes isolator board). All versions include 6 LED assembles. Replace all 6 so that they match in brightness. Page 6
ER48D Control Panel Assembly Page 7
ER48D Control Panel Parts Item Part # Description 006 PRINTED CIRCUIT BOARD, POWER Fasteners Required (Quantity) Part # 0083 TRANSFORMER, LIGHTING () 8303 3 709 DOOR LATCH () 8303 4 777 CONNECTOR, MEAT PROBE 5 8987 SWITCH, HIGH LIMIT () 8303 6 0063 COVER, POWER BOARD (4) 8303 7 99-0 BUSHING,.00 8 00596 WIRING HARNESS, CONTROLLER BOARD 9 0673 CONTROLLER BOARD (4) 83308 0 053 MEMBRANE KEYPAD (3) 83308 70053-0 ASSEMBLY, FLIP UP CONTROLLER, SERVICE (4) 83308 00605 WIRE, GROUND, CONTROL PANEL 3 8303 SCREW, SLOT HWH, #0 x 3/8-003 WIRING HARNESS, MAIN (not shown) - 00598 WIRING HARNESS, LIGHTING (not shown) - 0059 WIRING HARNESS, DOOR LATCH (not shown) See fasteners page for description Kit part number 700057-0 includes the entire control panel assembly with wiring harnesses (except the controller board). Page 8
ER48D Oven Parts (Diagram ) Item Part # Description Fasteners Required (Quantity) Part # 707 CONVECTION BAFFLE KIT (right oven) (4) 83708 7755 SMOKE ELIMINATOR () 83708 3 779 CONVECTION ELEMENT (right oven) (3) 83708 4 775 TEMPERATURE SENSOR () 83708 5 60 3 CONVECTION MOTOR AND FAN (3) 83709 6 889 FILTER, CONVECTION 7 0034 COOLING FAN 8303 8 708 4 CONVECTION BAFFLE KIT (left oven) (4) 83708 9 8377 CONVECTION ELEMENT (left oven) (3) 83708 See fasteners page for description Part number 707 is a kit containing these parts. Kit contains convection baffle and 4 screws. 3 Part number 60 is a kit the convection fan, motor and hardware. Kit contains convection fan motor, fan blade, washer and nut. 4 Part number 708 is a kit containing these parts. Kit contains convection baffle and 4 screws. Page 9
ER48D Oven Assembly (Diagram ) Page 0
ER48D Oven Parts (Diagram ) Item Part # Description Fasteners Required (Quantity) Part # 706,3 RACK SUPPORT (4) 83708 7865BP FRAME, BROIL, RIGHT OVEN (4) 83708 3 0068 ELEMENT, BROIL, RIGHT OVEN (4) 83708 4 760 GLASS, BROIL ELEMENT, RIGHT OVEN 5 70088 4 BAKE ELEMENT KIT, RIGHT OVEN 6 70088 4 BAKE ELEMENT KIT, RIGHT OVEN 7 7898 GLASS, BAKE 8 797BP FRAME, BAKE (8) 83708 9 7900 GASKET, BAKE GLASS 0 9398 LIGHT FIXTURE, HALOGEN (INCLUDES FIXTURE AND LENS) 0049 LIGHT BULB, HALOGEN, V, 0 W 00590 WIRING HARNESS, MALE TO FEMALE, RIGHT BROIL/BAKE ELEMENT 3 0059 WIRING HARNESS, MALE TO MALE, RIGHT BROIL/BAKE ELEMENT 4 6076 ELEMENT, BROIL, LEFT OVEN () 83708 5 664 BAKE ELEMENT, LEFT OVEN () 83708 6 773 MEAT PROBE See fasteners page for description PN 706 is a kit containing both rack supports. 3 On the right oven, use PN 07099-0 (left rack support) and PN 07099-0 (right rack support) on the following revisions: Revision H of models ER48D-C-SCH/LP, ER48D-C-SCH/NG, ER48DSCH/LP, ER48DSCH/NG Revision J of models ER48D-C-SCH/LP/H, ER48D-C-SCH/NG/H, ER48DSCH/LP/H, ER48DSCH/NG/H and serial numbers: F-G30003, F-G30004, F-G3004, F-G3006 (ER48DSCH/NG) All units manufactured before or after these revisions use kit PN 706. 4 PN 70088 is a kit containing these parts. Kit contains bake element and bake element tray. Page
ER48D Exterior Components 8 Page
ER48D Exterior Parts Item Part # Description Fasteners Required (Quantity) Part # 00457 ISLAND, TRIM (5) PN 83708, (8) PN 8303 700447 3 BACKGUARD, 3-INCH (5) PN 83708, (8) PN 8303 700436 4 BACKGUARD, 9-INCH (5) PN 83708, (8) PN 8303 70047 5 BACKGUARD, 4-INCH (5) PN 83708, (4) PN 8303 0454 PANEL, RR, LEFT 3 0456 PANEL, RR, RIGHT 4 045 COVER, JUNCTION BOX () 8303 5 045 COVER, REGULATOR (4) 8303 6 7009 ASSY, SIDE PANEL, RIGHT 83708 7 7000 ASSY, SIDE PANEL, LEFT 83708 8 8368 RUBBER BUMPER ( REQUIRED PER UNIT) 9 00853E CONTROL PANEL, ETCHED 0 007B INTAKE GRILL (8) 83709 700 ASSY, KICK PANEL (3) 83708 774 BRACKET, ANTI-TIP LEVELER 3 06440 LEVELER, ANTI-TIP 4 700000 LEG *****PLASTIC INSERT, LEG 6683******* 5 00730 NUT, JAM, HEX, #0-3/4 6 604 6 BRACKET, ANTI-TIP (4) 83054 7 0450 BOX, RR PANEL 8 0384 TERMINAL BLOCK 9 70084 KIT, HINGE RECEPTACLE ( right. left) (4 per set) 83709 0 00084BP COVER, MID-CELL, FRONT () 83709 See fasteners page for description Replacement part number shown. Order PN AERB48D0 for complete kit. 3 Replacement part number shown. Order PN AERB48D3 for complete kit. 4 Replacement part number shown. Order PN AERB48D9 for complete kit. 5 Replacement part number shown. Order PN AERB48D4 for complete kit. 6 Screw kit must be ordered separately. Order screw kit PN 70034. Kits contains 4 screws. Page 3
ER48D Door Assembly (Right) Page 4
ER48D Door Parts (Right) Item Part # Description 700050 ASSY, DOOR HANDLE, CHROME TRIM, RIGHT DOOR Fasteners Required (Quantity) Part # 705 3 ASSY, DOOR SKIN WITH LOGO () 83709 3 0004B HEAT SHIELD, OUTER, RIGHT DOOR (4) 83709 4 003B HEAT SHIELD, LOWER, RIGHT DOOR (4) 83709 5 0003B HEAT SHIELD, INNER, RIGHT DOOR (4) 83709 6 7968 WINDOW PACK, RIGHT DOOR 7 0005 GASKET, WINDOW PACK, RIGHT DOOR 8 3674 COVER, BRACKET, HINGE MOUNTING, ( PER DOOR) (3) 83709 9 703 4 HINGE KIT, RIGHT DOOR 0 0005BP DOOR LINER, RIGHT DOOR 000 GASKET, RIGHT DOOR 7793 SPACER, DOOR LINER, RIGHT DOOR 3 0006 SCREW, 0-3 x.00 TORX, PAN HEAD 4 75CH LOGO, DACOR 5 00390CP/CH/BC/BR END CAP, HANDLE, COPPER/CHROME/BLACK CHROME/BRASS - - HINGE RECEPTACLE (see External Components) See fasteners page for description Order as kit, part number 700050. Kit includes handle, end caps and mounting screws. 3 Order as kit, part number 705. Includes factory installed front glass. 4 Order as kit, part number 703. Kit includes both hinges. Page 5
ER48D Door Assembly (Left) Page 6
ER48D Door Parts (Left) Item Part # Description 700059 ASSY, DOOR HANDLE, CHROME TRIM, RIGHT DOOR Fasteners Required (Quantity) Part # 70006-0 ASSEMBLY, DOOR SKIN, LEFT DOOR () 83709 3 00068B HEAT SHIELD, OUTER, LEFT DOOR (4) 83709 4 0030B HEAT SHIELD, LOWER, LEFT DOOR (4) 83709 5 00067B HEAT SHIELD, INNER, LEFT DOOR (4) 83709 6 00069 WINDOW PACK, LEFT DOOR 7 00073 GASKET, WINDOW PACK, LEFT DOOR 8 3674 COVER, BRACKET, HINGE MOUNTING, ( PER DOOR) (3) 83709 9 704 3 HINGE KIT, LEFT DOOR 0 00074BP DOOR LINER, LEFT DOOR 0007 GASKET, LEFT DOOR 7793 SPACER, DOOR LINER, RIGHT DOOR 3 0006 SCREW, 0-3 x.00 TORX, PAN HEAD 4 00390CP/CH/BC/BR END CAP, HANDLE, COPPER/CHROME/BLACK CHROME/BRASS - - HINGE RECEPTACLE (see External Components) See fasteners page for description. Order as kit, part number 700059. Kit includes handle, end caps and mounting screws. 3 Order as kit, part number 704. Kit includes both hinges. Page 7
ER48D Base Assembly Item Part # Description Fasteners Required (Quantity) Part # 0000 BASE, FRONT/REAR 8303 700000 LEG 3 0069 BASE, SIDE SUPPORT 4 00730 NUT, JAM, HEX, #0-3/4 5 774 BRACKET, ANTI-TIP LEVELER 6 06440 LEVELER, ANTI-TIP 8303-6683 PLASTIC INSERT, LEG (not shown) See fasteners page for description. Page 8
ER48D Misc. Parts, Accessories, Fasteners Part # AWR4 AG44 AEGR3648 WOK RING GRIDDLE GRILL 807 STANDARD BROIL PAN Miscellaneous Parts and Accessories 806 GRILL FOR STANDARD BROIL PAN Description 70707 GLIDERACK OVEN RACK (for use with right oven only) 6783 STANDARD TYPE OVEN RACK, RIGHT OVEN 678 STANDARD TYPE OVEN RACK, LEFT OVEN AORPVR ABS0 ACS363 LARGE CAPACITY ROAST/BROIL PAN WITH V-SHAPED RACK PIZZA BAKING STONE COOKIE SHEETS (3 PER CARTON) Use PN 70633 on the following revisions: Revision H of models ER48D-C-SCH/LP, ER48D-C-SCH/NG, ER48DSCH/LP, ER48DSCH/NG Revision J of models ER48D-C-SCH/LP/H, ER48D-C-SCH/NG/H, ER48DSCH/LP/H, ER48DSCH/NG/H and serial numbers: F-G30003, F-G30004, F-G3004, F-G3006 (ER48DSCH/NG) All units manufactured before or after these revisions use PN 70707. Use PN 070 on the following revisions: Revision H of models ER48D-C-SCH/LP, ER48D-C-SCH/NG, ER48DSCH/LP, ER48DSCH/NG Revision J of models ER48D-C-SCH/LP/H, ER48D-C-SCH/NG/H, ER48DSCH/LP/H, ER48DSCH/NG/H and serial numbers: F-G30003, F-G30004, F-G3004, F-G3006 (ER48DSCH/NG) All units manufactured before or after these revisions use PN 6783. Fasteners Part # Description 0505 SCREW, 4-40 x / P FL 700007 SCREW COUNTER SUNK HEAD M4 x 0.5 8303 SCREW, SLOT #0 x 3/8 HWH 83308 NUT, KEPS, 6-3 8357 SCREW, PHILLIPS HEAD, #8 x 3/8 83708 SCREW,TORX, WAFER HEAD, #8 x /, CHOME 83709 SCREW,TORX, WAFER HEAD, #8 x /, BLACK Page 9