Ridder LogicDrive The logical solution for intensive livestock farming and crop storage drive to innovate
The Ridder LogicDrive drive unit Robust and reliable The maintenance-free Ridder LogicDrive unit is designed and built to drive ventilation systems. Equipped with a winch belt, the LogicDrive is the perfect drive unit for accurately opening and closing air inlet valves with automatic spring mechanisms. Equipped with one or more chain couplings, the Logic Drive is extremely suitable for accurately positioning ventilation valves together with rack drives. The drive power required by the LogicDrive is provided by a 24VDC stepper motor. The wear-resistant gear and worm wheel transmissions in the Logic Drive convert this drive power into a slow movement with a distinctive high drive torque. The RLD80 is enclosed in a compact and robust cast iron housing, fitted with a mounting base. This mounting base allows for a quick and secure attachment of the LogicDrive. Thanks to the 24VDC stepper motor, the LogicDrive is highly suitable for applications with an emergency power supply. This allows the LogicDrive to supply sufficient power to adjust the air inlet valves or ventilation valves to the pre-set emergency position should mains power fail. With this 0-10V control signal, the LogicDrive is easy to set. This involves setting the start position, the end position and, if applicable, the emergency position. Adjusting the LogicDrive to an emergency position requires both the Ridder LogicPower emergency power supply and LogicControl control unit. The control unit of the Ridder LogicDrive protects the drive unit against overloading. In the event of an overload, the LogicDrive stops immediately. The Logic Drive then activates an alarm contact to indicate that an overload has occurred. This alarm contact is also activated if the control signal or mains power is lost. Dust and water resistant The quality of the LogicDrive is also reflected in the fact that it is both dust and water resistant: The drive unit has a protection class of IP65. The fully-sealed housing also prevents pests, such as red mites, from entering the unit. Thanks to its smooth surface, the LogicDrive is easy to clean. Intelligent The LogicDrive is not only powerful, but also intelligent. The LogicDrive is controlled by a 0-10V control signal from a climate controller. This control signal is processed by the LogicDrive s integrated control to adjust the unit to the exact position requested. This does not require position feedback. Ridder LogicDrive: Powerful under any conditions Reliable with mains and emergency power supply Accurate positioning High quality in all respects Easy to use and install
Ridder LogicDrive program Create the optimum conditions for animals or crops Robust, reliable and precise - that is what the new Ridder LogicDrive drive units stand for. This innovative product helps farmers or growers accurately control the climate in their livestock or crop storage buildings. Where effective ventilation is needed to create the optimum climate for animals or crops, the Ridder LogicDrive is the perfect drive unit for operating air inlet valves or curtains. The Ridder Logic program for intensive livestock farming and crop storage: The LogicDrive RLD80 and RLD200 drive units The LogicControl RLC101 and RLC102 control units The LogicPower RLP200 emergency power supply Controlled by the climate controller, the LogicDrive positions the air inlet valves to provide the required supply of fresh air and expel unwanted heat and moisture. The LogicDrive delivers excellent performance in its application. Combined with the Ridder LogicControl control unit and LogicPower emergency power supply, the LogicDrive is also ideal in situations where the power supply can be unstable.
Ridder LogicControl and LogicPower Logical links To get the most out of the LogicDrive drive unit, a stable power supply and accurate control is essential. This is possible with the Ridder LogicControl control unit and LogicPower emergency power supply. These products form the logical link between the LogicDrive, 1-phase mains power and the climate controller. Optimum control The Ridder LogicControl provides a stable 24VDC power supply and monitored 0-10V control of the LogicDrive. The LogicControl is easy to configure to make the best possible use of the LogicDrive s capabilities. Should the control signal from the climate controller be lost, the LogicControl will take over control and the LogicDrive will go to the pre-set emergency position. Reliable emergency power supply The Ridder LogicPower makes a ventilation system with a LogicDrive unit even more reliable. The LogicPower is activated if the mains power is lost or instructed to do so by an external alarm, such as a thermostat. In these situations, the LogicPower will serve as the power supply and, if combined with the LogicDrive, adjust the LogicDrive to the emergency position. The LogicPower will also generate an alarm signal.
Our comprehensive product program In addition to the Ridder LogicDrive, Ridder Drive Systems develops, produces and supplies a wide range of drive units. Depending on your application, the desired pull force and your country s voltage, we can always provide the best drive system for your needs. The figure below shows a complete overview of our drive system range. Feedback signal RPU Control 0-10V Nm 24V (DC) 115V (1F) 230V (1F) 208V 400V 480V 600V 24V (DC) 230V (1F) 30 60 90 RW45 Power Roller Tubular motor Power Roller Ridder Logic Drive 80 RW45E 120 200 RW240 Ridder Logic Drive 200 240 400 RW400 RWE series 600 RW600 800 RW800 1000 1400
drive to innovate www.ridder.com