Fittings Valves Actuators
Low Emission Valves to 50 PPM Cast Steel Valves 150 2500 ASME; Globe & Check Valves; WCB & High Temperature Chrome Valves; Low Temperature Valves; Flanged, Butt-weld, RTG, End Connections; API 600 Design; 13 Chrome, 316 & Special Alloy Trims Stainless Alloy Valves 150 1500 ASME; Gate, Globe, Check & Ball Valves; 316, 317, A-20, 347, Monel, Inconel & other High Alloy Materials. ANSI, B16.34, API 600 and Cryogenic Designs Ball Valves 150-1500 ASME; Floating Soft Seat, V-Port, Metal Seated and Trunnion Design; API 607; Hypatite, PTFE, Pure Teflon, Carbon Filled, Metal Seat Designs; CSA/UL Certification; Lever, Gear & ISO 5211 Automated Operation BALL VALV ES Kitz/Perrin High Performance & Custom Ball Valves Two Way, Three Way & Multi Port Valves for Temperature of -190 C to +800 C, Sizes Ranging from 1/2"-24" to 2500 ASME Class - High Alloy Body Materials & Special Seating Configurations Brass Bronze & Iron Valves Gate, Globe, Check, Balls Valves & Strainers; CSA, NSF Lead Free, UL, FM, LP Designs; Extension Stems, Locking Handles & Multiple Operators DJ Series Butterfly valves 150-250 Designs; 2" to 24"; Ductile Iron Body; 2 Piece Low Profile, Aluminum Bronze, SS or Ductile Disc; G/F PTFE Low Friction Bearings; EPDM & Buna Liners; Lever, Gear or Direct Mount Actuation. A-Series Brass Appliance Valves CSA Approved; 1 & 2 piece Body Designs; Threaded & Flare End connections B-Series Brass Ball Valves Full and Reduced Port Designs; ASTM 37700 Qualified Brass, NSF Certified & Cast Bronze Models; NPT, Solder, PEX, Compression End Connections; SS Trim; Drain & Quick Opening Valve Designs; CSA, NSF, UL, FM & 250 lb Steam Models; Extension Stems & Locking Handles; In Line Check Valve C-Series Carbon Steel Ball Valves 1, 2 & 3 Piece Body Designs; Full and Regular Port; A105, WCB, LCC Body Materials; Threaded, Encapsulated Body Bolt & Seal Weld Designs; API 607 5th Edition; Stainless Steel, 250 lb Steam & NACE Trim; NPT, Socket Weld End Connections; Positive Locking Lever, Deadman & ISO 5211 Automated Operation D & S Series Butterfly Valves 200 PSI Design, 2" - 42", Ductile Iron, Stainless Steel & Alloy Bodies, AL/BZ, Ductile, Nylon 11, Stainless Steel, PTFE Coated and Other Disc Materials. BUNA & EPDM, Viton, PTFE, Food Grade, Hight Temp, Silicone, Wear Resistant & Other Specialty Seats. Locking & Throttle Plates, Locking Gear Operators & Low Torque Under Cut Discs. Lead- Free NSF Certified & Bi-Directional Rated For Dead End Service. F-Series Flanged Ball Valves 150-600 ASME; 1 & 2 Piece Body; Full & Regular Port Design; WCB, LCC & 316 Body Materials; NACE; Fire Safe Design to API 607; Lever, Gear and ISO 5211 Automated Operation G-Series SS Ball Valves 1, 2 & 3 Piece & 3-Way Body Designs; Full & Regular Port; 316 & 317 Body Materials; Threaded & Encapsulated Body Bolt Design; API 607; G-2/G- 2E CSA Certified for Natural Gas Service; 250 lb Steam Service Seats; NPT, Socket Weld, Butt Weld End Connections; Positive Locking and Deadman Handles; Lever or ISO 5211 Direct Mount Automation. HM-Series High Pressure 3 Piece Ball Valves 3 Piece High Pressure Forged Steel Ball Valves; A105N, LF2 & CF8M Body Materials; 3000 & 6000 PSI (3" 2000 PSI / 4" 1000 PSI); Full Port & Reg. Port Designs; Delrin, PEEK & RPTFE Seating Materials; API 607; NACE / MR-01-75-2002; Large Ductile Iron Positive Lock Handle; ISO 5211; Anti- Static Device Ask us about our 3 Year MAS Valve Limited Warranty
Bronze, Brass & Iron Valves Gate, Globe, Check, Ball Valves & Strainers; NPT, Solder, Flanged End Connections; CSA, NSF, UL, FM Designs; Extension Stems, Locking Handles, Multiple Operators. Butterfly valves 150-250 Designs; 2" to 24"; Ductile Iron Body; 2 Piece Low Profile Aluminum Bronze, SS or Ductile Disc; G/F Low Friction Bearings; EPDM & Buna Liners; Lever, Gear or Direct Mount Actuation Bronze & Brass Valves Ball Valves, Circuit Balancing Valves & HVAC Products in NSF Certified Configurations. Ball Valves in EZ-Grip-Pushfit, EZ Press-Crimp, EZ-PEX-Cold Formed PEX, Circuit Balancing Valves in NSF Lead-Free & Standard Bronze, Cast Iron Materials, 1/2" - 12" Fixed & Variable Orifice Designs, c/w High & Low Measuring Points and Precision Indicator Device. Low Flow CBV & Metering Stations, Coil Kits, Ball Checks & Other HVAC Products. Low Emission To 100 PPM Or Less To API 624 Cast & Alloy Steel Flexible Wedge, Parallel Slide Gate, Globe & Tilting Disc Check Pressure Seal Valves; 600 4500 Class 2 to 42 in WCB, High Temperature Chrome, Low Temperature Steel & Corrosion Resistant Stainless Steel & High Alloy Grades; Flanged & Multiple Schedule Butt-Weld & RTJ End Connections Cast & Alloy Steel Gate, Globe & Check Bolted Bonnet Valves; 150-2500 Class - 1 to 60 in Conventional, NON-Return Stop Globes & Bellow Seal Designs; WCB, High Temperature Chrome, Low Temperature Steel and Corrosion Resistant Stainless Steel & High Alloy Grades; Flanged & Multiple Schedule Butt-Weld & RTJ End Connections Cryogenic / LNG / Oxygen Cleaned Valves; ASME B16.34 / 150 1500 Class - ½ 30 in Bronze, Cast Steel, Stainless Steel and High Alloy Steel; Flanged, Threaded, Welded End Connections Forged Steel Gate, Globe, Swing/Lift/Ball Check & Needle Valves; 800 / 150 2680 Class - ¼ 4 in Welded & Bolted Bonnet; A105, F22, F11, F5, F9, 316, 316L & Other Special Alloy Materials; Threaded, Socket Weld; Butt Weld & Flanged End Connections Cast & Alloy Dual Plate Check Valve; 150, 300, 600 Class 2 42 in WCB, 316 & Other High Alloy Materials Cast & Alloy High Performance Butterfly Valves; 150, 300, 600 Class 2 to 42 in WCB, 316 and Other High Alloy Material; Soft, Metal & Fire Safe Seat Designs; Wafer & Lug End Connections Bronze & Iron Gate, Globe & Check Valves; 125, 150 300 Class 1/8 60 Modification & Repair A Full Service Modification Centre in Manning, SC Enabling Fast and Capable Supply of Modified Product to Meet the Market Demand Flow Control Components Materials, Ductile Iron, 304SS, 316SS, 317SS, A-20, 254SMO, and High Alloy Materials Knife Gate Valves Design: MSS-SP-81, MSS-SP-35 Full Body Lug & Wafer Style Full Port, Metal Seated, Resilient Seated. Bi-directional Positive Shut off & 60% V Port Designs Cylinders and Actuation Hand wheel, Bevel Gear, Chain Wheel, Double Acting, Pneumatic & Hydraulic. Tilting Disc Check Valves Flanged End Connections; Off Center Pivot Design Wedge Gate, Globe & Swing Check Valves 150 & 300 ASME & 200 WOG; Flanged, NPT & Socketweld Sampling Valves Full Positive Shut Off; All 316 SS Construction; 2" X 11/2" Instrument Valve All 316 SS Construction; Instrument/Transmitter Isolation Processes Automation Packages* Pneumatic, Hydraulic, Electric
Complete With a 2 Year Double C Factory Warranty WKM DynaCentric High Performance & Resilient Seated Butterfly Valves WKM HPBV 150-600 ANSI; 21/2" 30" Wafer & Lug Body Designs; WCB, LCC, CF8M Body Materials; Temperature Range 50 to 1000 F; Bi Direction Teflon, Metal to Metal Class V & Fire Safe Seat Design; Double Offset Eccentric Disc to Seat Closure Motion Demco Resilient Seated Butterfly Valves 285, 200, 150 PSI Models; Cast Iron, Ductile Iron & Carbon Steel Body Materials; Multiple Seat to Disc Combinations; SS, Monel, Al Bronze, DI, A-20, Hastelloy C, Low Profile Disc Materials; Non- Squeeze Cartridge Seat Designed for Reliable Dead End Lug Service Shut-Off; Truly REPAIRABLE SEAT/Disc Design; Lever, Gear, Extended and Automated Operation Cast Steel 150-2500 ASME; API 600/ ASME B16.34; Gate, Globe, Check & Pressure Seal Designs; WCB, LCC, SS & High Chrome & Alloy Body Materials; NACE Conformance; Flanged, Butt Weld, RTJ End Connections; API Trim 1, 2, 5, 10, 12, 16, Bronze; Handwheel, Chain Wheel or Motor Operated. Forged Steel 150-1500 ASME; API 602, Gate, Globe (Y & T Pattern), Lift Check, Swing Check & Extended Body Design; A105N, LF2, F-316 Body Materials; Bolted Bonnet & Welded Bonnet Body Designs; HF, FHF, Alloy Trim Materials; Threaded, Socket Weld, TSW & Flanged End Connections API 603 Stainless Steel 150-600 ASME; 1/2" - 12" Gate, Globe & Check in CF3, CF3M, CF8, CF8M CN7M & Other Corrosive Resistant Materials. Flanged, Butt Weld & Ring Type End Connections, Integral or Welded Seats, Graphite Packing & Gaskets with Bellow Seal & Cryogenic Availability. Trunnion Ball Valves 150-2500 ASME, A105, LF-2, F316, CF8M and Other Alloy Body Materials. 316 & ENP Trim with RPTE, Nylon, PEEK Seats & GLT (Viton), NBR. HSM. FKM, PTFE, Polymite Seals. Double Piston (Single & Both Sides) c/w Self Relieving Seats API 6D & 6A, ASME B16.34, CSA Z245.15, ANSI B16.5, API 607 & 6FA, NACE Forged Steel Valves 150-4000 ASME; Gate, Globe & Check Valves; Reduced & Full Port Flow Designs; A105N, 316, F-5, F-11, F-22, F-91, LF2 & Other Specialty Body Materials; 13% Chrome, HF, FHF, Alloy, NACE & Multiple Trim Materials; Threaded, Socketweld, PSW & Flanged End Connections; Bolted, Welded, Bellow Seal, Drain, Pressure Seal, Y-Pattern Body Types Cast Steel Valves 150-2500 AMSE; API 600; Gate, Globe, Check, Pressure Seal, Thru Conduit, Parallel Slide Body Designs; WCB, Low Temp, High Alloy Chrome, Stainless Alloy Body Materials; Flanged & Buttweld End Connections
Promation Engineering Product line includes: CSA Approved. ¼ Turn Electric Actuators, from 55 lb to 40,000 lb. Spring Return, Electric actuators from 90 /lb to 2300 /lb. Linear Electric Actuators, offering four different output forces provide a more closely matched actuator/ valve combination - without over-driving the valve. Up to 100mm stroke and up to 4400 lb. thrust. Hazardous Location Actuators 800 in lbs. through 13,250 in lbs. Torque. CSA Class I, Division 1, Groups C, D CSA Class II, Division 1, Groups E, F, G; CSA Class III, Division 1; T6 (85 C) Standard features include, manual override, heater, and auxiliary switches. Optional Accessories, Local control stations, timers, cold weather heaters, position feedback, power feedback, proportional control, three phase power, torque switch, wireless transmitter, quarter turn timer, rotation modification, single wire control. Max-Air/MAS brand Pneumatic Double Acting & Spring Return 1/4 Turn Actuators, Solenoid Valves and Limit Switches. High Cycle Reliability, Compact Rack & Pinion Design Available With Technopolymer, Extruded Aluminum & Stainless Steel Housings. Easily Adjustable & Extremely Versatile ISO 5211 Mounting Flanges. A Great Fit When Using Our MAS Direct Mount G-series Ball Valves. Unlimited Cycle Warranty. Actuators & Controls Pneumatic Industrial and Commercial Designs. Double Acting, Spring Return and Linear Applications. Accessories Include Positioners, Solenoids,Limit Switches, Speed Controls and Position Monitors. Electric Operators for Quarter, Multiturn, On/Off Modulating and Fail Safe. Strainers Y-Type 125-2500# Iron, NSF Certified Bronze, Carbon, 316 SS and Special Alloys in Threaded, Socketweld and Flanged Configurations Simplex Basket 125-300# Iron, Bronze, Carbon, and Stainless Steel through 72" Ball-Plex/Duplex 125-600# Critical Service Strainers in Iron, Bronze, Carbon, Stainless Steel with Flanged or Threaded End Connections Through 24" UL Listed Fireline Strainers Fabricated and Specialty products 150# through 2500# Check Valves 2"- 56" Control, Wafer, Center Guided, Silent and Double Disc Check Designs in Iron (UL), Carbon, Stainless and Special Alloy, Chexter Check Light Weight Wafer Valves. Fittings Malleable Pipe Fittings 150 lb and 300 lb. 1/8" to 6" Sizes. Black and Galvanized. Cast Iron, Ductile Iron, Stainless Steel Flanged Ball Valves. Unique Patented PFA Fused Stainless Steel Ball Lowers Torque and Provides the Unequaled Corrosion Resistance of Teflon. ANSI Class Face to Face Dimensions for Gate Valve Retrofits. Flanged & Grooved End Design. Wafer Check Valves 125, 150, 300 & 600 lb Pressure Class. Cast Iron, Cast Steel and Stainless Steel Materials. Viton A, Teflon and Stainless Steel seats. ULC Approved models, ANSI, and API Designs. Outside Lever, Counterweights and Dashpots Available. Technical data, dimensions, materials & specifications are subject to change without notice. MAS LC- 04/17/2015 Printed in Canada
www.mastewart.com Head Office 12900 87th Avenue Surrey, British Columbia Canada V3W 3H9 mail to: P.O. 258, Surrey, BC, V3T 4W8 Phone: (604) 594-8431 Toll Free North America: 1-800-594-8431 Fax: (604) 594-4335 Ontario Branch 40 Pugsley Court, Ajax, Ontario L1Z 0L8 Phone: (905) 683-7303 Fax: (905) 683-9108 Alberta Branch 6125-56th Avenue Edmonton, Alberta T6B 3E2 Phone: (780) 436-9051 Fax: (780) 435-0463 Toll Free in Alberta 1-800-232-7376 Quebec Branch 79H Brunswick Blvd. Dollard-des-Ormeaux, Que. H9B 2J5 Phone: (514) 421-6311 Fax: (514) 421-6323 Sales Offices Calgary, Alberta Phone: (403) 252-7262 Fax: (403) 253-8455 Winnipeg, Manitoba Phone: (204) 837-5604 Fax: (204) 896-1992 Dartmouth, Nova Scotia Phone: (905) 683-7303 Fax: (905) 683-9108 Long Beach Branch 1811 E. 28th Street Signal Hill, CA 90755 Phone: (562) 595-1811 Toll Free: 1-888-337-7598 Fax: (562) 426-6016 Bakersfield Branch 5225 Gilmore Ave. Bakersfield, CA 93308-6302 Phone: (661) 322-1935 Toll Free: 1-877-258-6166 Fax: (661) 322-6719 Charlotte Branch 803 Pressley Road, Suite 107 Charlotte, North Carolina, 28217 Phone: (704) 527-0722 Toll Free: 1-866-582-5837 Fax: (704) 527-0791 Toll Free: 1-866-810-9287