CCERTIFIED CLIP-IN SILENCE ERTIFIED Glass partition and door system for acoustic insulation SYSTEMS
CLIP-IN SILENCE Fully glazed, silicone-free, sound-insulating partitioning system Description Do you wish to enjoy the transparency of glass in peace and quiet, using an extremely flexible system? CLIP-IN SILENCE combines all of these desirable features. Walls The CLIP-IN SILENCE uses SGG STADIP SILENCE, which is glass laminated using an acoustic PVB interlayer. The acoustic foil has no effect whatsoever on the translucence of the glass. The laminated glass is a safety glass, offering protection against injury. The walls have been tested up to a noise reduction level of 48 db. the use of silicone. The CLICK25 section is available in blank anodised aluminium (EV1), in stainless steel or in the client s preferred RAL colour. The glass couplers can be supplied in 3 models: CLIP-IN X-profile for straight couplings, CLIP-IN T-profile for panels positioned at right angles to the wall, and CLIP-IN H-profile for a 90 degree angled structure. A D E Detail D CLIP-IN X-profile for straight couplings Doors is the collective name for these acoustic door systems, which can be used with the acoustic partition walls to create a fully acoustic system. This product range includes both hinging and pivoting doors. The doors have been tested by TNO and Peutz up to R W values of 32dB to 42 db. Detail A Basic detail of the structural connections for the CLICK25 (also for the wall connection) Detail E CLIP-IN H-profile for 90 degree angles Partition detail The following details form the basis of the silicone-free fully-glazed CLIP-IN SILENCE partitioning system. These basic details are common to all variants of this unique silicone-free partitioning system and they are explained on the following pages. Details A and B display the structural connections for the CLICK25 system. CLICK25 is an optional aluminium section that can be installed without B Detail B Basic detail of the structural connections for the CLICK25 section with an end cover for the door connections F Detail F CLIP-IN T-profile for three-way joins page 2 / 243
PC1032/PC1135/PC1337 PC1032/PC1135/PC1337 This acoustic door has an R W -value of 32dB, 35dB or 37dB. The PC doors can be used in spaces where you do not want any grooves in the floor (in the case of under-floor heating, for example), or where it is not possible or permissible to drill deep into the floor. The frame section is made of aluminium and is available in anodised aluminium, stainless steel or standard RAL colours. The mountings can be adapted as desired. This door is a simple action door. Decibel ratings Wall SYSTEMS CLIP-IN SILENCE 1132 Rw=32dB Peutz report 2283-5-RA Wall SYSTEMS CLIP-IN SILENCE 1136 Rw=36dB TNO reprt: MON-RPT-2008-01826 Wall SYSTEMS CLIP-IN SILENCE 1338 Rw=38dB TNO reprt: MON-RPT-2008-01824 Door PC1032 Rw=32dB TNO report: MON-RPT-2010-01980 Door PC1135 Rw=35dB TNO report: MON-RPT-2010-01981 Door PC1337 Rw=37dB TNO report: MON-RPT-2010-01982 page 244 PC1032/PC1135/PC1337 5 1 Detail PC1135 1 (the same as PC1032, PC1337) Frame section with hinge Detail PC1335 5 (the same as PC1032, PC1337) Frame section attachment top 2 4 Detail PC1135 2 (the same as PC1032, PC1337) Frame section with handle lock Detail PC1135 4 (the same as PC1032, PC1337) Drop sill under fully-glazed acoustic door page 3 / 244
CLIP-IN 1337-01/1337-02 CLIP-IN 1337-01 This designer acoustic door has an R W -value of 37dB. The acoustic pivotal door revolves on a floor spring (detail 1337-01-02 18). The standard mountings are made of stainless steel. At the top (detail 1337-01 6) and bottom (detail 1337-01 7), the door has a CLIP-IN groove into which a special noise-resistant seal profile is clipped. This seal profile is also used between the side-light and the door (detail 1337-01-02 5). The maximum dimensions of the CLIP-IN 1337-01 are 1,100 x 2,700 mm. CLIP-IN 1337-02 This acoustic door, which also has an R W -value of 37dB, has a top light that distinguishes it from the 1337-01 door. At the top (detail 1337-02 9), the door has an CLIP-IN groove into which a special noise-resistant seal profile is clipped. The top light is connected to the side-lights using stainless steel attachment fittings (detail 1337-02 16 and 17). The maximum dimensions of the SYSTEMS CLIP-IN 1337-02 are 1,100 x 2,500 mm in the case of a maximum wall height of 3,000 mm. Decibel ratings Wall SYSTEMS CLIP-IN SILENCE 1338 R W = 38 db TNO report: MON-RPT-2008-01824 Door SYSTEMS CLIP-IN 1337 R W = 37 db TNO report : MON-RPT-2008-01823 5 7 18 Detail 1337-01-02 5 Noise-resistant seal between the side-light and the door Detail 1337-01-02 7 Noise-resistant seal at the bottom of the door Detail 1337-01-02 18 Floor spring door with noise-resistant seal page 4 / 245
CLIP-IN 1337-01/1337-02 6 Detail 1337-01 6 Top of door with noise-resistant seal 17 9 16 Detail 1337-02 17 Door attachment fitting with side-light and top light Detail 1337-02 9 Top of door with noise-resistant seal with top light Detail 1337-02 16 Pivotal door with attachment fitting CLIP-IN 1337-01 CLIP-IN 1337-02 page 5 / 246
1338/1739 1338 This acoustic pivotal door, which has an R W -value of 38dB, revolves on a floor spring (detail 1338 19). The standard mountings are manufactured from anodised aluminium but can also be supplied in stainless steel or in a standard RAL colour. At the top (detail 1338 10) and bottom (detail 1338 11), the door has a skirting-panel. A stainless steel door pusher is fitted from skirting-panel to skirting-panel. 1739 This acoustic door has an R W -value of 39dB. The door model is identical to the 1338 except that the thickness of the glass is different. Decibel ratings Wall CLIP-IN SILENCE 1338 R W = 38 db TNO report: MON-RPT-2008-01824 Door 1338 R W = 38 db TNO report: IS-RPT-060038 Wall CLIP-IN SILENCE 1739 R W = 39 db TNO report: MON-RPT-2008-01823 Door 1739 R W = 39 db TNO report: IS-RPT-060040 1338/1739 page 6 / 247
1338/1739 10 Detail 1338 10 Skirting-panel at the top of the door containing the noise-resistant seal 15 15 Detail 1338 15 Noise-resistant seal on door with side-light Detail 1338 15 Noise-resistant seal on door with side-light 19 11 Detail 1338 19 Pivotal point with skirting-panel and floor spring containing the noise-resistant system Detail 1338 11 Skirting-panel at the bottom of the door containing the noise-resistant seal page 7 / 248
7042 7042 This acoustic door has an R W -value of 42dB, which is unique for its type. This noise-reducing hinged door model is installed completely flush. The border frames of the glass and the glued metal frame are available in every desirable standard RAL colour. The door can be combined with double acoustic walls: CLIP-IN SILENCE 6 600 / 42 R w = 42 db 6 500 / 45 R w = 45 db 6 600 / 48 R w = 48 db Decibel ratings Wall SYSTEMS CLIP-IN SILENCE 6600/42 R w =42dB Peutz report A 2283 13 RA Wall SYSTEMS CLIP-IN SILENCE 6500/45 R w =45dB Peutz report A 2283 2 RA Wall SYSTEMS CLIP-IN SILENCE 6600/48 R w =48dB Peutz report 2283 14 RA Door 7042 R w =42dB TNO report: MON-RPT-2010-01986 Standard wall details for CLIP-IN SILENCE 6570/43T and 8670/47 C Structural connection at top, bottom and side connections E Corner glass connection with CLIP-IN H-profile D Glass connections with CLIP-IN X-profile F Glass connection T-fork with CLIP-IN H-profile and CLIP-IN X-profile page 8 / 249
7042 Details 7042 and walls 3 Detail 7042 3 Detail of top frame section with glass door and noise-resistant seal 1 2 Detail 7042 1 Detail 7042 2 Frame section with hinge and Handle lock with frame section and noise-resistant seal noise-resistant seal 4 Detail 7042 4 Bottom of door with drop sill 7042 page 9 / 250
SILENCE SLIDING DOOR SLIDING DOOR 1736 The SYSTEMS SILENCE SLIDING DOOR 1736 This acoustic sliding door has an R W -value of 36dB, which is unique for a fully-glazed sliding door. This acoustic sliding door rolls on stainless steel wheels over a floor profile; the door also has a guide-rail at the top. The system has a standard stainless steel T-handle. The door can be combined with a acoustic partitioning: CLIP-IN SILENCE 1739, R W = 39dB. Decibel ratings Wall CLIP-IN SILENCE 1739 R W = 39 db TNO report: MON-RPT-2008-01823 Door SILENCE SLIDING DOOR 1736 R W = 36 db Peutz report: A 2054-1-RA 16 juli 2010 SILENCE SLIDING DOOR 1736 page 10 / 251
SILENCE SLIDING DOOR SLIDING DOOR 1736 22 Detail 1736 22 Top guide-rail sliding door and slidepanel seal 21 Detail 1736 21 Side connection with seal for sliding door and side-panel 20 Detail 1736 20 Side connection with seal for sliding door and side-panel 23 Detail 1736 23 Bottom seal for stainless steel wheels of sliding door and seal for side-panel page 11 / 252
PC1032/PC1135/PC1337 In addition to supplying these siliconefree acoustic CLIP-IN partitioning systems, the Glassolutions network is a specialist in glass for interiors. We are always willing to contribute our know-how regarding specific glazing requirements such as fire-resistance, noise-resistance and security. STRUCTURE Fully-glazed fire-resistant walls and doors SILENCE Acoustic insulation for partitions and doors PROTECT Anti-bandit and bulletresistant partitions and doors CLIP-IN silicone-free acoustic partitioning system All the brands quoted in this brochure are either registered or trademarked by Saint-Gobain. By Muchimuchi - Saint-Gobain Glass Solutions France RCS Nanterre 447768169 - June 2011 May be subject to change Distributor For Glassolutions contact details by country, please refer to the last page. www.glassolutions.eu