Wide variety of applications from consumer electronics to commercial Standard epoxy sealed terminations Gold contacts available for low power applications Available support brackets for greater stability Up to four poles with five functions available Anti-rotation feature on flat toggles High torque bushing prevents separation - E222871 from frame during installation Wide variety of terminal options SPECIFICATIONS Electrical Ratings Electrical Life Contact Resistance Dielectric Strength Insulation Resistance Operating Temperature Storage Temperature 5A @ 120 VAC, 28VDC 2A @ 250VAC 50,000 cycles typical < 20 mω max initial @ 2-4VDC, 100mA 1500Vrms min > 100MΩ min -40 C to 85 C -40 C to 85 C MATERIALS Actuator Housing Cover Bushing Contacts Terminals Brass, Chrome Plated DAP Diallyl Phthalate Stainless Steel Brass, Nickel Plated Phosphor Bronze, Silver Plated Brass, Silver Plated
TOGGLE SWITCH ORDERING INFORMATION Series: 2 3 T M Number of Poles: 1 = SPDT 2 = DPDT 3 = 3PDT 4 = 4PDT Switch Function: 1 = ON-NONE-ON 2 = ON-NONE-(ON) 3 = ON-OFF-ON 4 = (ON)-OFF-(ON) 5 = ON-OFF-(ON) 6 = ON-ON-ON ** for SP3T use 26 and for DP3T use 46. Please see 3-Way Wiring Diagram section for schematics. Actuator: T = 5.08mm, Std S = 10.41mm, Std X = 13.97mm, Std V = 16.26mm, Std W = 21.34mm, Std U1 = 7.20mm, Flat Toggle **only available with H/H1 U = 9.76mm, Flat Toggle **only available with H/H1 Z = 11.86mm, Large Toggle Z1 = 17.45mm, Large Toggle LK = 15.68mm, Locking Toggle, Round Top LK1 = 14.50mm, Locking Toggle, Flat Top Bushing: E / E1 = 8.89mm, ¼-40NS / Non-Threaded, Keyway K = 8.89mm, M6P0.75 / Non-Threaded, Keyway F / F1 = 7.10mm, ¼-40NS / Non-Threaded, Keyway J / J1 = 9.60mm, ¼-40NS / Non-Threaded, Flat G / G1 = 7.52mm, High Torque, ¼-40NS / Non-Threaded, Flat H / H1 = 8.00mm, High Torque, ¼-40NS / Non-Threaded, Keyway L = Splash proof (only available with switch functions 1 & 3) **See Actuator Option section for bushing availability with LK, LK1, Z, & Z1 actuators Terminals: B = Solder Lug C = PC Pin D = Quick Connect H = Horizontal Mount, Right Angle PC Pin (not available in 4 pole version) V = Vertical Mount, Right Angle PC Pin S20 / V20 = PC Pin with Support Bracket / Snap-in Support Bracket S25 / V25 = PC Pin with Support Bracket / Snap-in Support Bracket S35 / V35 = PC Pin with Support Bracket / Snap-in Support Bracket S40 / V40 = PC Pin with Support Bracket / Snap-in Support Bracket Contacts: Q = Silver Plated R = Gold Plated G = Gold over Silver Plated Epoxy Seal: Blank = No Epoxy Seal E = Epoxy Seal Actuator Cover: Actuator Cover Colors: ** Available for S and T actuator covers only Blank = No Cover 1 = White S = for S actuator 2 = Black T = for T actuator 3 = Red K = for K bushing 4 = Yellow E = for E bushing 5 = Blue Z = for Z and Z1 actuators B Q E
SWITCH FUNCTION Function Toggle Position SPDT 1 ON NONE ON 2 ON NONE (ON) 3 ON OFF ON 4 (ON) OFF (ON) 5 ON OFF (ON) Terminals 2-3 --- 2-1 Function Toggle Position DPDT 1 ON NONE ON 2 ON NONE (ON) 3 ON OFF ON 4 (ON) OFF (ON) 5 ON OFF (ON) 6 ON ON ON Terminals 2-3,5-6 --- 2-1, 5-4 Function Toggle Position 3PDT 1 ON NONE ON 2 ON NONE (ON) 3 ON OFF ON 4 (ON) OFF (ON) 5 ON OFF (ON) Terminals 2-3,5-6 8-9 --- 2-1, 5-4 8-7 Function Toggle Position 4PDT 1 ON NONE ON 2 ON NONE (ON) 3 ON OFF ON 4 (ON) OFF (ON) 5 ON OFF (ON) 6 ON ON ON Terminals 2-3,5-6 8-9, 11-12 --- 2-1, 5-4 8-7, 11-10
ACTUATOR OPTIONS S T X W V ** The actuator heights are shown with the E bushing. The actuator heights will change with other bushing options U U1 ** The U and U1 actuators can only be used with the H & H1 bushings Z Z1 LK LK1 ** Threaded bushings are standard with Z, Z1, LK, LK1 actuators. No bushing designator is used for these standard bushings. LK and LK1 are available with a non-threaded bushing, designated N. LK, LK1, Z, & Z1 are available with a splash proof bushing, designated L. **LK and LK1 are not available with momentary switch functions.
BUSHING OPTIONS E = Threaded K = Threaded F = Threaded J = Threaded G = Threaded E1 = Non-Threaded F1 = Non-Threaded J1 = Non-Threaded G1 = Non-Threaded Panel Mounting ¼ Bushing Without Locking Ring H = Threaded H1 = Non-Threaded L Splash Proof Bushings ¼ Bushing Without Locking Ring Metric Bushing 15/32 Bushing With LK Actuator With non-locking Actuator With Z Actuator
TERMINAL OPTIONS B = Solder Lugs D = Quick Connects C = PC Pins H = Horizontal Mount, Right Angle PC Pins V = Vertical Mount, Right Angle PC Pins
S20 / S25 = PC Pins with Support Brackets S20 / S25 Brackets Shown **Snap-in Feature V20, V25
V35 / V40 = PC Pins with Support Brackets S35 / S40 Brackets Shown Terminal Option THREE WAY WIRING DIAGRAMS **Snap-in Feature V35, V40 Support Bracket Options A Dimension Terminal Option A Dimension Bracket Terminal Width S20 11.68 V20 11.68 3.18mm S25 16.00 V25 16.00 3.18mm S35 11.68 V35 11.68 6.35mm S40 16.00 V40 16.00 6.35mm CONTACT OPTIONS Designator Contact Material Terminal Material Electrical Ratings Q Silver Plating Silver Plating 5A @ 120VAC, 28VDC; 2A @ 250VAC R Gold over Nickel Plating Gold over Nickel Plating.4 VA max @ 20VAC or VAC max G Gold over Silver Plating Gold over Silver Plating.4 VA max @ 20VAC or VAC max or 5A @ 120VAC, 28VDC; 2A @ 250VAC
EPOXY SEAL ACTUATOR COVERS S T E = For Standard Bushing K = For Metric Bushing Z Designator Color 1 White 2 Black 3 Red 4 Yellow 5 Blue **Colors only available for S & T covers HARDWARE NUTS Standard Dress Metric Standard for Z & Z1 Knurled Locking Rings Standard Keyway Standard Flat Standard for Z & Z1 Lock Washers Standard Standard for Z & Z1