Water and Wastewater Pump Products

Water and Wastewater Pump Products EBARA Fluid Handling Division

EBARA Fluid Handling an EBARA International Corporation company 1651 Cedar Line Drive, Rock Hill, SC 29730 8033275005 8033275097 (fax) pumpsebaracom Trade Show Pumps and Material Order Process The following catalog contains EBARA water and wastewater pumps, artwork, literature, and promotional items available to authorized EBARA Fluid Handling distributors and customers for use at regional trade shows *Important Note: Please allow at least two weeks PRIOR to your required date, EXCLUDING TRANSIT TIME, for processing your show materials request Please complete the form ** to request the show pumps and/or items for use at trade shows Email the order form to: customer_service@pumpsebaracom (as indicated on the form) The order will be reviewed and checked for availability You will receive an email confirming your order details After receiving the confirmation email, please submit a PO (like a typical order) EBARA FHD will ship the show pumps with freight prepaid An RMA number will be issued to ship and return the show pumps to the factory Credit will be issued once the show pumps have been received and inspected by EBARA Fluid Handling Please return the show pumps and materials as soon as possible in order for FHD to quickly handle all requests Status of the order can be checked (as with any order) after logging into the distributor portal on pumpsebaracom For further information or questions, please contact: customer_service@pumpsebaracom, or by calling (803) 327-5005 **The form is (now) separate from the PDF catalog to make it easier to complete/download and send! It can be accessed by clicking the below link, or by pasting the full URL into the browser address area: http://wwwpumpsebaracom/docs/tscat/ebara-fhd_tradeshow_catalog_formpdf

Contents Section Water and Wastewater Show Items Page Stainless Steel Show Pumps Optima-3AS1 3 Optima-3SS1 4 EPD-5AS1 5 3U32-125 5 Hp 6 3U65-200 Casing 7 50DWXFAU64S 8 CDU ¾ 9 JEU1506 10 EVMU 10-14 PEO 11 EVMUG 45-4-1 PEO 12 EVMU 3-18 5 Hp 13 EVMUG 64-2-1 20 Hp 14 EVMUG 45-4-1 30 Hp 15 2CDXU70/206T2 16 DWO-3006 17 MATRIX 5-3T6/13 18 Cast Iron Show Pumps DWP 19 DGFU 2 Hp 20 DSU 5 Hp 21 EBG 22 DMLE 23 DLFU 10 Hp 24 DLKFMU 25 Hp 25 DVDFMU 25 Hp 26 EFQT 4 27 DLFU W/ QDC & Panel 28 DSC3 29 DSC4 30 DSZ3 31 EBG Basin 32 EFQT 2 Rotating Assembly 33 Grinder Assembly 34 D-Series Casing 35 K-Series Impeller 36 K-Series Suction Cover 37 Other Show Equipment Brand Stand 39 Artwork 40 Brochure 51 2

Model: OPTIMA-3AS1 (16) (15X15X10) (11) (6x9x11) $500 Stainless steel submersible PRO Drainer series used for the pumping of slurry or semi-dirty water It is ideally suited for many industrial, commercial, residential, and agricultural liquid applications including fixed or portable installations 3

Model: OPTIMA-3SS1 (16) (15X15X10) (11) (6x9x11) $500 Stainless steel submersible PRO Drainer series used for the pumping of slurry or semi-dirty water It is ideally suited for many industrial, commercial, residential, and agricultural liquid applications including fixed or portable installations Show item is the "slim line" model which can be used in smaller spaces 4

Model: EPD-5AS1 (27) (21X13X15) (22) (8x8x17) $1000 I SH2-EPD Stainless steel submersible PRO Drainer series used for the pumping of slurry or semi-dirty water It is ideally suited for many industrial, commercial, residential, and agricultural liquid applications including fixed or portable installations Show item is the automatic model 5

Model: 3U 32-125 5Hp Single PH Pump (100) (24X17X18) (95) (18x10x11) $750 ItemNo: SH3-3U5S Stainless steel end suction centrifugal pump designed for rugged continuous duty with a range of HP from 3 to 30 hp It is suitable for many general water applications that require corrosion resistance including moderately aggressive liquids Show item is complete pump with cutaway 6

Model: 3U65-200 CASING (POLISHED) (20) (18X15X13) (15) (13X6X16) $250 SH4-3U65C Show item is stainless steel casing for the 3U-65-200 model 7

Model: 50DWXFAU64S (POLISHED ) (42) (26X13X15) (36) (8x9x22) $500 SH5-DWXF Submersible stainless steel pump that is ideal for residential, commercial and industrial applications It is capable of handling wastewater with suspended solids of up to 2" in diameter Show item is a complete pump with cutaway 8

Model: CDU ¾ HP (55) (21X13X15) (50) (14x9x8) $800 ItemNo: SH6-CDU Stainless steel end suction centrifugal pump designed for rugged continuous duty with a range of HP from ¾ to 3 hp It is suitable for many general water applications that require corrosion resistance including moderately aggressive liquids Show item is complete pump with cutaway 9

Model: JEU1506 2HP (53) (26X13X15) (48) (20x9x10) $500 SH7-JEU Stainless steel self-priming jet pump suitable for many general clean water applications that require corrosion resistance including water supply, pressure boosting, small irrigation systems and pool/tank emptying Show item is complete pump with cutaway 10

Model: EVMU 10-14 Pump (100) (15X15X30) (100) (15X15X30) $500 SH8-EVMU Pump End Only 11

Model: EVMUG 45-4-1 Pump End (200) (15X15X35) (200) (15X15X35) $500 SH9-EVMUG Pump End Only 12

Model: EVMU 3-18 5 Hp (200) (10X10X39) (200) (10X10X39) $500 SH10-EVMU Designed for booster, water purification, and hot water applications Complete pump cutaway 13

Model: EVMUG 64-2-1 20 Hp (250) (15X15X47) (250) (15X15X47) $500 SH11-EVMU Designed for booster, water purification, and hot water applications Complete pump cutaway 14

Model: EVMUG 45-4-1 30 Hp (300) (15X15X56) (300) (15X15X56) $500 SH12-EVMU Designed for booster, water purification, and hot water applications Complete pump cutaway 15

Model: 2CDXU70/206T2 (45) (21X13X15) (40) (15X8X10) $500 SH13-2CDXU Stainless steel 2-stage centrifugal pump designed for corrosion resistance and rugged continuous duty It is suitable for pressure boosting applications and can handle moderately aggressive liquids Show item is complete pump with cutaway 16

Model: DWO-3006 (45) (21X13X15) (40) (16x7x10) $500 SH14-DWO Stainless steel open impeller, end suction centrifugal pump suitable for applications with suspended solids including food and beverage processes, dirty liquid handling and industrial washing machines that may contain solids Show item is complete pump with cutaway 17

Model: MATRIX 5-3T6/13 (38) (21X13X15) (33) (16x6x9) $500 SH15-MTRX Stainless steel horizontal multi-stage centrifugal pump suitable for a wide range of applications in the industrial and domestic sector including industrial washing equipment, pressure boosting, and irrigation Show item is a complete pump 18

Model: DWP (386) (38X26X84) (300) (38X26X84) $1,000 SH16-DWP Submersible, portable slim line top discharge pump used for dewatering service They are capable of handling contaminated fluids in the corrosive and severest of applications at construction sites, mines, power stations, steel plants, ships and in aquaculture Available in standard and 316 stainless steel construction Show item is pump with cutaway with skid cover 19

Model: 32DGFU615S2 2HP, 1 PHASE (135) (22X40X20) (110) (9X11X29) $2500 SH17-DGU Small lightweight submersible grinder pump used for small pressurized sewage/drainage transfer and commercial/household sewage and transfer FM explosion proof motors are available Show item is a complete pump 20

Model: 80DSU6372 5HP (160) (22X40X20)) (142) (12X10X26) $500 SH18-DSU Submersible sump/drainage pump with semi-open impellers designed for handling stringy and abrasive materials The DSHU model can handle hot water applications up to 176 F Show item is a complete pump 21

Model: EBG (105) (40X22X20) (80) (8X11X27) $500 SH19-EBG Submersible grinder pump that easily handles residential or light commercial sanitary waste, reducing it to fine slurry for non-clog flow Show item is a complete pump 22

Model: DMLEU 10HP (315) (48X40X24) (285) (12X16X33) $1,000 SH20-DMLE Submersible pump with single channel enclosed impeller Not available in explosion proof Show item is pump only with cutaway 23

Model: DLFU 10hp (380) (48X40X24) (340) (17X22X41) $1,000 SH21-DLF The model DLFU submersible non-clog pumps are constructed of rugged cast iron with heavy duty, high efficiency motors suitable for industrial and municipal water and wastewater applications, including flood control The high efficiency impeller makes it possible to pass large solids up to 3 1/4" 24

Model: DLKFMU6184 25HP (600) (48X40X24) (540) (18X22X48) $1,500 SH22-DLKF The model DLKFU submersible non-clog pumps are constructed of rugged cast iron with heavy duty, high efficiency motors suitable for industrial and municipal water and wastewater applications, including flood control The high efficiency impeller makes it possible to pass large solids up to 3 1/4" 25

Model: DVDFMU6184 25HP (730) (48X40X24) (690) (18X14X46) $1,000 SH23-DVDF Submersible sewage pump with semi-open recessed vortex impeller that gives it the ability to pass large solids up to 5" Show item is pump only with explosion proof motor 26

Model: EFQT 4 (863) (35X50X41) (800) (20X33X30) $1,500 SH24-EFQT Self Priming trash pump that is able to handle solids and light slurries The large volute allows for quick priming even with the casing only partially filled and an open suction line Show item is a complete pump 27

Model: DLFU 5HP WITH QDC & PANEL (1061) (57X27X87) (950) (57X27X87) $5,000 SH25-DLFQ Wet well system consisting of 5HP DLFU with QDC and control panel 28

Model: DSC3 W/ Seal Cutaway (3394) (36x58x100) Tools needed: 30MM Wrench and Socket, Flat head screw driver (3250) (35X55X100) $10,000 SH26-DSC Submersible non-clog wastewater pump with ability to pass spherical solids up to 8" in diameter and can be installed in wet or dry pit applications Show item is the pump with skid cover and display mechanical seal 29

Model: DSC4 W/ Impeller Cutaway (3655 lbs) (50X63X98) (3500 lbs) (50X63X98) Tools needed: 30MM wrench and socket, flat head screw driver $15,000 SH27-DSC4 Submersible sewage wastewater pump able to pass large spherical solids in wet or dry pit applications It is available with semi-open or enclosed impellers Show item is the pump with impeller cutaway and skid cover 30

Model: DSZ3 (1814) (42X42X98) Tools needed: 2-24MM, 1-19MM Wrench, crowbar (1700) (42X42X98) $10,000 SH28-DSZ Large submersible non-clog pump with axial flow impeller This pump is suitable for industrial and municipal water and wastewater, sewage and flood control applications Show item is the pump cutaway with skid cover 31

Model: EBG WITH BASIN CUTAWAY (581) (40X40X57) (500) (40X40X57) $3,000 SH29-EBGB Show item is a basin cutaway with an EBG pump 32

Model: EFQT 2 Rotating Assembly (50) (21X13X15) (50) (21X13X15) $300 SH30-EFQRA Rotating Assembly for 2 EFQT 33

Model: Grinder Assembly Cutaway (75) (21X13X15) (70) (12X12X15) $600 SH31-GA Pump end on base & mirror 34

Model: DLFU/DLMFU Casing Cutaway (40) (18X15X13) (35) (13X16X8) $250 SH32-DLFCC Show item is a Cutaway of a D-Series Casing 35

Model: K-Series Impeller (20) (15X15X10) (20) (10X10X6) $150 SH33-KSI K-Series Impeller 36

Model: K-Series Suction Cover (20) (15X15X10) (20) (10X10X6) $150 SH34-KSSC K-Series Suction Cover 37

Water and Wastewater Artwork Brand Stand Cast Iron Image $ 250 ItemNo:SH36-CIBS Brand Stand Stainless Steel Images $ 250 ItemNo:SH37-SSBS 39

Water and Wastewater Artwork Large EBARA Logo 23 X 22 $ 50 ItemNo:SH38-LEL Small EBARA Logo 12 X 11 ¼ $ 50 ItemNo:SH39-SEL 40

Water and Wastewater Artwork Dominators Group 24 ¾ X 20 $ 50 ItemNo:SH41-DWP 41

Water and Wastewater Artwork Sump Image 18 x 15 $ 50 ItemNo:SH42-SIP 3U Booster Package 30 X 20 $ 50 ItemNo:SH43-3UBP 42

Water and Wastewater Artwork CWW Lake Oliver 30 X 19 1/2 $ 50 ItemNo:SH44-CWWP DLFU Wet Well 25 X 16 $ 50 ItemNo:SH45-DWWP 43

Water and Wastewater Artwork 350 DSC3 17 5/8 x 15 $ 50 ItemNo:SH46-DSCP Cast Iron Pumps 24 X 18 $ 50 ItemNo:SH47-CIP 44

Water and Wastewater Artwork Cast Iron Wet Well 30 X 20 $ 50 ItemNo:SH48-CIWWP Chattanooga 24 X 15 $ 50 ItemNo:SH49-CHTP 45

Water and Wastewater Artwork DSC3 Wet Well (lg) Harpeth Valley Inlet 30 X 20 $ 50 ItemNo:SH50-DSCHV Elbows 15 X 18 $ 50 ItemNo:SH51-ELBP 46

Water and Wastewater Artwork Palm Beach County (lg) 24 X 18 $ 50 ItemNo:SH52-PBP Dry Pit 30 X 20 $ 50 ItemNo:SH53-DPP 47

Water and Wastewater Artwork Sm Stainless Steel Booster System 14 ½ X 24 $ 50 ItemNo:SH54-SSBP 48

Water and Wastewater Artwork Manatee County Dry Pit 31 X 20 $ 50 ItemNo:SH56-MCDP 49

Water and Wastewater Literature Company Brochure Limited quantities available, minimum pieces will ship with order at Ebara s discretion SHL- CBE Wastewater Brochure Limited quantities available, minimum pieces will ship with order at Ebara s discretion SHL- WWBE 50

EBARA Fluid Handling an EBARA International Corporation company 1651 Cedar Line Drive, Rock Hill, SC 29730 8033275005 8033275097 (fax) pumpsebaracom Show Pump and Materials Order Form **The form is (now) separate from the PDF catalog to make it easier to complete/download and send! It can be accessed by clicking the below link, or by pasting the full URL into the browser address area: http://wwwpumpsebaracom/docs/tscat/ebara-fhd_tradeshow_catalog_formpdf