X 4 The X Series heavy duty precision N lathe by Kingston is designed for heavy and long work pieces for the energy, mining, textile, paper, and transportation industries. Utilizing the same headstock and spindle bore of Kingston s HR model engine lathe, the X 4 features a 4.06 bore, or swing, 80-280 length. It is equipped with a V8 hydraulic turret, and both a powerful 25HP/30HP main motor and a 5.45 HP and 9.5 HP A servo motor that drives the X and Z-axis respectively. The headstock has 4 gear shifts controlled by hydraulics for greater torque, and the main spindle has a three point bearing support system making it ideal for cutting heavy and extremely hard materials. Also available in 7.09, 10, 12.5 and 14.5 ore. Main spindle 4.06 (104mm) bore hardened and ground alloy steel spindle for greater accuracy. Three-point bearing support system for heavy duty cutting capability Spindle Torque harts M41 HR 5900 5163 Ft-lb 30 HP ( cont.) 4425 2950 1475 HR 5900 5163 Ft-lb 4569 Ft-lb 4425 2950 1475 Torque ( cont.) 7 RPM 0 0 6 onstant onstant Output M42 40 HP 34 HP ( 30 min.) 30 HP ( cont.) Torque ( 30 min.) Torque ( cont.) 0 22 RPM 0 27.5 onstant onstant Output 35 HP 30 HP 25 HP 20 HP 7 HP 0 (HP) 20 HP 14 HP 7 HP 0 (HP) HR 3000 40 HP M43 HR 600 460 Ft-lb 450 405 Ft-lb 2200 1400 750 M44 0 300 2,379 Ft-lb 2,094 Ft-lb 74 RPM onstant onstant 34 HP ( 30min.) 30 HP ( cont.) Torque ( 30min.) Torque ( cont.) 0 125 250 onstant Output onstant Output 34 HP ( 30min.) 30 HP ( cont.) Torque ( 30min.) 40 HP 30 HP Torque ( cont.) 20 HP 15 7 HP 382 RPM 0 (HP) 0 1000 RPM onstant Torque onstant Output 30 HP 20 HP 7 HP (HP) Hardened and ground gears 22 wide two V way bed ox-way cross slide for fine and heavy cutting capability Manual hand wheels for quick and easy setup For more information or to find your local dealer, visit us at www.kingstonmachine.com
X 4 Features 25/30HP, A spindle motor (Fanuc) 22 ed Width with Two V Ways ox Way ross Slide on arriage FANU 0iT ontroller with Manual Guide l, 10.4 L Monitor V8 or H4 Hydraulic Turret Headstock ooling System Hydraulic and Manual Quill Movement Operating, Electric, ontroller & Parts Manual Options Siemens 828 with Shop Turn Tool lock with T-slot Rear Turret Axis Live Tooling 6 oring ar Holder 1072.5 X stroke 414 624 210 30 1240 apacity Swing Over ed Maximum utting iameter istance etween enters Width of ed Headstock Spindle ore Spindle motor Type of Spindle Nose Hght. Floor to Spindle enter Gear ox Number of Speed Ranges Spindle Speed Turret Max. Stroke Rapid Traverse 21.65 27.56 80 / 120 / 160 / 200 /2 /280 22 4.06 25HP / 30HP A2-11 49 52 4 8 to 800 RPM, 12 to 1200 RPM (opt) V8 Hydraulic (Std) or H4, Toolblock with T-slot (Opt) 16.3 83.4 / 124 / 164 / 202 / 247 / 279 240 384 420 30 Motor Servo Motor 5HP 9HP 510 all Screw ø1.26, P=5 ø2.5, P=10 (< 200 ) / 3.15, P=10 ( 200 ) Tailstock Tailstock Quill enter Tailstock Quill iameter Tailstock Quill Travel M.T. # 6 Ø5.9 8.66 Model inch (mm) A X 4 80 X 4 120 X 4 160 X 4 200 X 4 2 X 4 280 195 (4953) 235 (5966) 275 (6998) 314 (7978) 353 (8958) 393 (9982) 261 (6637) 302 (7657) 342 (8689) 380 (9659) 431 (10956) 470 (11944) Swing over bed (870) (1020) 49 (1235) 52 (1310) imension Floor Space Weight 99 W Total Power Required 261 / 302 / 342 / 380 / 431 / 470 L 15,000 / 17,200 / 18,700 / 21,600 / 23,800 /26,000 15,400 / 17,600 / 19,800 / 22,100 / 24,300 /26,500 50 KVA 99"(2513mm) 49"(1240mm) 50"(1273mm) A (66"1680mm) 77"(1963mm)
X 7 & 10 The X Series is the perfect convergence of Kingston s advanced N engineering and its industry leading heavy duty big bore engine lathes. Utilizing the same headstock and spindle bore as the popular HP and HPX models, the X 7 & 10 features a 7.09 and 10.1 bore respectively, A2-15 spindle nose and comes ready for both front and rear chucks. Two precision taper roller bearings in the spindle ensure heavy duty cutting capability and lasting performance. The powerful 40/50 HP main motor is coupled with a 4-speed headstock for maximum torque, and unique to Kingston is the 5.5 HP and 9.5 HP A servo motor that drives the X and Z-axis. The X model is available in or swing and lengths of 80 280. Also available in 4.06, 12.5 and 14.8 bore. Spindle Torque harts Main spindle 7.09 or 10.1 bore hardened and ground alloy steel for greater accuracy. Heavy duty precision taper roller bearings provide rigid support Hardened and ground gears 22 wide two V way bed ox-way cross slide for fine and heavy cutting capability Manual hand wheels for quick and easy setup For more information or to find your local dealer, visit us at www.kingstonmachine.com
X 7 & 10 Features X 7: 30/40HP, X 10: 40/50HP, A Spindle motor (Fanuc) 22 ed Width with Two V Ways ox Way ross Slide on arriage FANU 0iT ontroller with Manual Guide l, 10.4 L Monitor V8 or H4 Hydraulic Turret Headstock ooling System Hydraulic and Manual Quill Movement Operating, Electric, ontroller & Parts Manual Options Siemens 828 with Shop Turn Tool lock with T-slot Rear Turret Axis Live Tooling 6 oring ar Holder apacity Swing Over ed Maximum utting iameter istance etween enters Width of ed Headstock Spindle ore Spindle motor Type of Spindle Nose Hght. Floor to Spindle enter Gear ox Number of Speed Ranges Spindle Speed 21.65 27.56 80 / 120 / 160 / 200 /2 /280 22 7.09 / 10.1 30/40HP (X7), 40/50HP (X10) A2-15 49 52 4 7 to 750 (7.09 ) / 6 to 600 (10.1 ) 1072.5 624 X stroke 414 210 240 384 420 30 30 1240 Turret Max. Stroke Rapid Traverse V8 Hydraulic (Std) or H4, Toolblock with T-slot (Opt) 16.3 76 / 116 / 157 / 195 / 239 / 272 510 Motor Servo Motor 5HP 9HP all Screw ø1.26, P = 5 ø2.5, P=10 (< 200 ) / 3.15, P=10 ( 200 ) Model X 80 X 120 X 160 X 200 X 2 X 280 Swing over bed (870mm) (1020) inch (mm) A 163 (4146) 204 (5166) 244 (6198) 282 (7168) 326 (8283) 365 (9271) 49 (1235) 52 (1310) 268 (6807) 309 (7827) 349 (8859) 387 (9829) 431 (10956) 470 (11944) Tailstock Tailstock Quill enter Tailstock Quill iameter Tailstock Quill Travel imension Floor Space Weight X 7 X 10 99 W Total Power Required M.T. # 6 Ø5.9 8.66 268 / 309 / 349 / 387 / 431 / 470 L 18,040 / 20,240 / 22,440 / 24,640 / 26,840 / 29,040 18,480 / 20,680 / 22,880 / 25,080 / 27,280 / 29,480 18,480 / 20,680 / 22,880 / 25,080 / 27,280 / 29,480 18,920 / 21,120 / 23,320 / 25,520 / 27,720 / 29,920 50 KVA (X 7) / 60 KVA (X 10) 99"(2513mm) 49"(1240mm) 50"(1273mm) A (66"1680mm) 77"(1963mm)
X 12 & 14 The industry leader for over three decades in heavy duty big bore engine lathes combines experience and its advanced N engineering to create the new Kingston X Series. Utilizing the same headstock as Kingston s popular HK engine lathe model, the X 12 & 14 features a 12.5 and 14.8 bore respectively, A2-20 spindle nose and comes ready for both front and rear chucks. Two precision taper roller bearings in the spindle ensure heavy duty cutting capability and lasting performance. The powerful 40/50 HP main motor is coupled with a 4-speed headstock for maximum torque, and unique to Kingston is the 5.5 HP and 9.5 HP A servo motor that drives the X and Z-axis. The X model is available in or swing and lengths of 80 280. Also available in 4.06, 7.09 and 10 bore. Main spindle 12.5 or 14.8 bore. Rigid and thick spindle wall ideal for cutting heavy and extremely hard materials. Heavy duty precision taper roller bearings provide rigid support Spindle Torque harts Hardened and ground gears 22 wide two V way bed ox-way cross slide for fine and heavy cutting capability Manual hand wheels for quick and easy setup For more information or to find your local dealer, visit us at www.kingstonmachine.com
X 12 & 14 Features 40/50HP, A spindle motor (Fanuc) 22 ed Width with Two V Ways ox Way ross Slide on arriage FANU 0iT ontroller with Manual Guide l, 10.4 L Monitor V8 or H4 Hydraulic Turret Headstock ooling System Hydraulic and Manual Quill Movement Operating, Electric, ontroller & Parts Manual Options Siemens 828 with Shop Turn Tool lock with T-slot Rear Turret Axis Live Tooling 6 oring ar Holder apacity Swing Over ed Maximum utting iameter istance etween enters Width of ed Headstock Spindle ore Spindle motor Type of Spindle Nose Hght. Floor to Spindle enter Gear ox Number of Speed Ranges Spindle Speed 21.65 27.56 80 / 120 / 160 / 200 /2 /280 22 12.5 / 14.8 40HP / 50HP A2-20 49 52 4 10 to 400 (12.5 ), 10 to 300 (14.8 ) 1072.5 624 X stroke 414 210 240 384 420 30 30 1240 Turret Max. Stroke Rapid Traverse V8 Hydraulic (Std) or H4, Toolblock with T-slot (Opt) 16.3 70.8 / 111 / 152 / 190 / 2 / 267 510 Motor Servo Motor 5H 9HP all Screw ø1.26, P = 5 ø2.5, P=10 (< 200 ) / 3.15, P=10 ( 200 ) Model X 80 X 120 X 160 X 200 X 2 X 280 inch (mm) A Swing over bed 30 (760) (870) (1020) 163 (4146) 204 (5166) 244 (6198) 282 (7168) 326 (8283) 365 (9271) 47 (1180) 49 (1235) 52 (1310) 268 (6807) 309 (7827) 349 (8859) 387 (9829) 431 (10956) 470 (11944) Tailstock Tailstock Quill enter Tailstock Quill iameter Tailstock Quill Travel imension Floor Space 99 W Weight X 12 X 14 Total Power Required M.T. # 6 Ø5.9 8.66 268 / 309 / 349 / 387 / 431 / 470 L 20,460 / 22,660 / 24,860 / 27,060 / 20,260 / 31,460 20,900 / 23,110 / 25,300 / 27,500 / 29,700 / 31,900 20,460 / 22,660 / 24,860 / 27,060 / 20,260 / 31,460 20,900 / 23,110 / 25,300 / 27,500 / 29,700 / 31,900 60 KVA 99"(2513mm) 49"(1240mm) 50"(1273mm) A (66"1680mm) 77"(1963mm)