PRICE LIST U39-0216R-IP GREASE MANAGEMENT FEBRUARY 1, 2016 SUPERSEDES U39-0215R2-IP (FEBRUARY 9, 2015) Our website pricing is the current list price and may vary from our printed price list. Please visit our website for up-to-date information. Visit us on the web for installation guidelines and operating instructions:
TERMS AND CONDITIONS OF SALE TERMS Cash discount 2% 10 days, net 30. The cash discount is allowed on merchandise only. Prices are subject to change and each order will be priced on the basis of prices in effect at the time of order. All orders are subject to approval of our office. Possession of this price list does not necessarily constitute an offer by the Company to sell to the holder on the basis of the terms described hereon. OVERDUE INVOICES Interest charged at a rate of 1.5% per month on all overdue invoices. FREIGHT $1000.00 net for prepaid freight. All shipments are F.O.B. seller s factory or authorized warehouse. Prepaid orders will be shipped via the most economical route of our choice. If the Customer selects a route with a higher rate, the difference will be charged to the Customer. WEBSITE Our website pricing is the current list price and may vary from our printed price list. Please visit www.ipexamerica.com for up-to-date information. Prices and product availability are subject to change without notice. While we try to ensure accuracy, we reserve the right to correct any errors in pricing or descriptions, and to cancel or refuse to accept any order based on an incorrect price or description. Such corrections may be made even after an order is accepted. SHIPPING RESPONSIBILITY The responsibility of IPEX USA LLC ceases when the carrier signs for the shipment in good order. We cannot be responsible for loss or damage to goods in transit, or delays or carriers in delivering shipments or for damages resulting from such delays as those caused by fire, explosion, act of God, strike or other difference with workmen, shortage of material or labor, delays in transportation, government restrictions, war, riot, civil commotion or cause beyond our control. Where shortage or damage is apparent, details should be noted by the carrier on the freight bill at the time of delivery. In case of concealed damage, carrier should be called at once to inspect the damaged shipment. Do not return damaged goods. RETURNED GOODS A Returned Goods Authorization Form issued by IPEX USA LLC. must accompany goods which are returned. We reserve the right to refuse the return of any item that is not a regular stock item with IPEX USA LLC. On items that are acceptable for credit, a restocking charge of twenty-five percent (25%) will be assessed against the credit to cover our handling, and/or inspecting or repackaging. Freight on returned goods will be the responsibility of the customer unless the reason for the return is due to defective goods. All goods returned must be in a saleable condition. OTHER In addition to sizes listed in this price list, other sizes may be available upon request. The product names used in this price list are for identification purposes only. All trademarks and registered trademarks are the property of their respective owners. Images used are for representation only and actual product may vary from that depicted TABLE OF CONTENTS Page Endura Grease Interceptors 3 Endura Solids 5 Endura Plaster Trap 5 Interceptor Flow Controls 7 Components & Accessories 8 Floor Sinks 12 Floor Sink Grates 12 CAUTION - Installing threaded fittings When installing threaded fittings, best practice requires that a suitable sealing medium, for example PTFE tape or non oilbased plumbers putty is used, to both seal the joint and ensure a positive and correct fit. Do not over tighten. Correct sizing is critical to the function of your interceptor. Find our GI sizing calculator online at: www.mygi.net - 2 -
HERE PRY PRY HERE ALL UNITS INCLUDE FLOW CONTROL FITTING w/cleanout and Air Intake Extended warranty applies when warranty card is filled out and sent back within 30 days of installation, otherwise standard 12 month warranty applies. www.endurawarranty.com ENDURA GREASE INTERCEPTORS * 7-15 GPM COMPACT UNITS G.P.M./ Lbs. - 3-7/14 3907A02 2 10/20 3910A02 2 15/30 3915A02C 2 20 GPM UNIT G.P.M./ Lbs. 20/40 3920A02 2 SUB OPS PLUMBING COMMITTEE ENDURA GREASE INTERCEPTORS with Spigot or Threaded Format Flow Control Fittings includes Spigot or Threaded Flow Control Fitting w/cleanout and Air Intake. SFCD required for, states of MA, AK, City of San Francisco and City of New York.*Where applicable. SUFFIX PART NUMBER WITH S OR T RESPECTIVELY. * 7 g.p.m. (0.44 L/sec.) 10 g.p.m. (0.63 L/sec.) 15 g.p.m. (0.95 L/sec.) 20 g.p.m. (1.26 L/sec.) APPROVED SUB OPS PLUMBING COMMITTEE APPROVED MEA 160-08-E Actual Grease Capacity (ASME 112.14.3) 32 lbs. (14.49 kg) 38 lbs. (17.28 kg) 41 lbs. (18.58 kg) Actual Grease Capacity (ASME 112.14.3) 76 lbs. (34.65 kg.) 25 GPM LO-PRO UNIT (LOW PROFILE) G.P.M./ Lbs. 25/50 3925A02LO 2 25 GPM UNITS G.P.M./ Lbs. G.P.M./ Lbs. 25/50 3925XTA02 2 25/50 3925XTA03 3 35 GPM UNITS 35/70 3935A03 3 35/70 3935A04 4 50 GPM UNIT G.P.M./ Lbs. 50/100 3950A03 3 50/100 3950A04 4 25 g.p.m. (1.58 L/sec.) 25 g.p.m. (1.58 L/sec.) 25 g.p.m. (1.58 L/sec.) 35 g.p.m. (2.21 L/sec.) 35 g.p.m. (2.21L/sec.) 50 g.p.m. (3.15 L/sec.) 50 g.p.m. (3.15 L/sec.) Actual Grease Capacity (ASME 112.14.3) 53 lbs. (24.22kg.) Actual Grease Capacity (ASME 112.14.3) 72.55 lbs. (32.90 kg.) 73.01 lbs. (33.11 kg.) Actual Grease Capacity (ASME 112.14.3) 139 lbs. (62.8 kg.) 139 lbs. (62.8kg.) Actual Grease Capacity (ASME 112.14.3) 122 lbs. (55.3 kg.) 122 lbs. (55.3 kg.) Shipping Weight 19 lbs. (8.78 kg.) 19 lbs. (8.78 kg.) 19 lbs. (8.78 kg.) Shipping Weight 25 lbs. (11 kg.) Shipping Weight 45 lbs. (20 kg.) Shipping Weight 35.61 lbs. (16.15 kg.) 37.77 lbs. (17.13 kg.) Shipping Weight 54 lbs. (25 kg.) 57 lbs. (26 kg.) Shipping Weight 65 lbs. (30 kg.) 70 lbs. (32 kg.) 830.37 880.63 1005.24 1238.91 1832.46 1335.08 1350.79 1931.94 2052.36 2471.20 2607.33 ASME A112.14.3
25XT Grease Interceptor New! Tool-Free EZ-Open latching system Optimized dimensions for max. performance Endura 25XT models The Endura 25XT models introduce new user-identified features, refreshing our 25gpm platform. Endura 25XT models incorporate all the valued features you have come to expect of Endura Grease Management products plus... EZ-Open cover latches now include finger friendly detail simplifying access Unique & proven production process adds rigidity without the need for external ribs allowing smooth tank finish for ease of cleaning New! EZ-Clean smooth finish New! Pry points for easy cover removal Inlet & outlet markings on lid side wall and inside flange Improved grease separation efficiency for peace of mind & operational performance Additional marking of In and Out inside tank flange Installed On-floor or In-floor, provides clear indication of flow direction & cover orientation Unique Processing Technology for new XT Using a specialized & proven injection molding process, unique to Endura, our PP thermoplastic is designed to build a structural framework to offer strength and durability for larger volume parts, while optimizing the overall product weight. Pry points are added to the cover providing defined location for a suitable tool when removing a stubborn cover Endura 3925XTA02 and 3925XTA03 models are supplied with 2 or 3 connections, our uniquely accessible flow control device and full installation and operation guidelines - 4 -
141/2 ENDURA Solids Interceptor Material 3911A02 Polypropylene 2 1216.75 ENDURA Solids Interceptor Basket 3911A-1 Polypropylene 2 472.71 Uses all the best features of the fieldproven Endura Grease interceptor, but now with solids management capability. The Solids Basket Accessory can be fitted directly in to your Endura grease interceptor in place of the inlet baffle or be located within its own stand alone tank for ease of access and location. The Solids Basket Accessory is compatible with full height models of Endura Grease Interceptors 20GPM to 50GPM Plaster Trap Plaster Trap The Endura Plaster Trap is Installed on a wide range of applications, where by gravity, fine material is required to be separated from the waste water flow. This includes materials such as plaster, clay, sand, sediment, grit and general debris. Any material heavier than water can be successfully separated in the Endura Plaster Trap. ENDURA PLASTER TRAP Tank 3910PA15 14.6 x 17.5 x 16.3 2 1084.82 3920PA15 23.6 x 17.5 x 16.3 2 1176.96-5 -
Multi-User input was key in the development of the Endura XL models Taking our product experience, manufacturing and distribution expertise, we blended this with the operational needs of the industry. We worked hard to ensure that whatever your interaction with Endura XL, IPEX has made Grease Management easy for you! WITH TRAFFIC RATED COVERS - CSA B481.0 S RATED 4075A04 4 40100A04 4 75 g.p.m. (4.73L/sec.) 100 g.p.m. (6.31L/sec.) Actual Grease Capacity (ASME 112.14.3) Cover Load Rating 559 lbs. (253 kg) S 1058 lbs. (480 kg) S WITH PEDESTRIAN / LIGHT TRAFFIC COVERS - CSA B481.0 M RATED 4075A04M 4 40100A04M 4 75 g.p.m. (4.73L/sec.) 100 g.p.m. (6.31L/sec.) 559 lbs. (253 kg) M 1058 lbs. (480 kg) M See U40 Price List See U40 Price List See U40 Price List See U40 Price List - 6 - NEW! Also available Class M covers (Proof load >4000 lbs) for internal/ external pedestrian and light traffic applications.
INTERCEPTOR FLOW CONTROLS (Modular) COMPACT FLOW CONTROL with Cleanout and Air Intake (PVC Grey) 3922107C 7 g.p.m. (0.44 L/sec.) 2 85.23 3922110C 10 g.p.m. (0.63 L/sec.) 2 85.23 3922115C 15 g.p.m. (0.95 L/sec.) 2 85.23 3922120C 20 g.p.m. (1.26 L/sec.) 2 85.23 3922125C 25 g.p.m. (1.58 L/sec.) 2 85.23 FLOW CONTROL with Cleanout and Air Intake (PVC Grey) 3922107 7 g.p.m. (0.44 L/sec.) 2 85.23 3922110 10 g.p.m. (0.63 L/sec.) 2 85.23 3922115 15 g.p.m. (0.95 L/sec.) 2 85.23 3922120 20 g.p.m. (1.26 L/sec.) 2 85.23 3922125 25 g.p.m. (1.58 L/sec.) 2 85.23 TFCD Required for City of Chicago. TFCD Pre-Packed with `T Suffix G.I. Models, eg. 3925403T THREADED FORMAT COMPACT FLOW CONTROL with Cleanout and Air Intake (PVC Grey) 3922107CAT 7 g.p.m. (0.44 L/sec.) 2 95.46 3922110CAT 10 g.p.m. (0.63 L/sec.) 2 95.46 3922115CAT 15 g.p.m. (0.95 L/sec.) 2 95.46 3922120CAT 20 g.p.m. (1.26 L/sec.) 2 95.46 3922125CAT 25 g.p.m. (1.58 L/sec.) 2 95.46 THREADED FORMAT FLOW CONTROL with Cleanout and Air Intake (PVC Grey) 3922107AT 10 g.p.m. (0.63 L/sec.) 2 106.82 3922110AT 10 g.p.m. (0.63 L/sec.) 2 106.82 3922115AT 15 g.p.m. (0.95 L/sec.) 2 106.82 3922120AT 20 g.p.m. (1.26 L/sec.) 2 106.82 3922125AT 25 g.p.m. (1.58 L/sec.) 2 106.82 SFCD Required for, State of MA, City of San Francisco and City of New York. SPIGOT FORMAT COMPACT FLOW CONTROL with Cleanout and Air Intake (PVC Grey) 3922107CAS 7 g.p.m. (0.44 L/sec.) 2 95.46 3922110CAS 10 g.p.m. (0.63 L/sec.) 2 95.46 3922115CAS 15 g.p.m. (0.95 L/sec.) 2 95.46 3922120CAS 20 g.p.m. (1.26 L/sec.) 2 95.46 3922125CAS 25 g.p.m. (1.58 L/sec.) 2 95.46 SPIGOT FORMAT FLOW CONTROL with Cleanout and Air Intake (PVC Grey) 3922107AS 7 g.p.m. (0.44 L/sec.) 2 106.82 3922110AS 10 g.p.m. (0.63 L/sec.) 2 106.82 3922115AS 15 g.p.m. (0.95 L/sec.) 2 106.82 3922120AS 20 g.p.m. (1.26 L/sec.) 2 106.82 3922125AS 25 g.p.m. (1.58 L/sec.) 2 106.82-7 -
FLOW CONTROLS INTERCEPTOR COMPONENTS & ACCESSORIES FLOW CONTROL with Cleanout and Air Intake (PVC Grey) 3933125 25 g.p.m. (1.58 L/sec.) 3 95.46 3933135 35 g.p.m. (2.21 L/sec.) 3 95.46 3933150 50 g.p.m. (3.15 L/sec.) 3 95.46 3944235A 35 g.p.m. (2.21 L/sec.) 4 130.89 3944250A 50 g.p.m. (3.15 L/sec.) 4 130.89 NOTE: Where local jurisdiction allows an AAV can be used as an alternative to traditional venting practice. AIR ADMITTANCE VALVE Material 392010 1-1/2 & 2 ABS 63.80 392011 1-1/2 & 2 PVC 99.99 NOTE: SDR 35 or SDR 28 sewer pipe required for sleeve - by others 392203W requires 6 sewer pipe 392204W requires 8 sewer pipe TFCD Required for City of Chicago. TFCD Pre-Packed with `T Suffix G.I. Models, eg. 3925403T THREADED FORMAT FLOW CONTROL with Cleanout and Air Intake (PVC Grey) 3933125AT 25 g.p.m. (1.58 L/sec.) 3 106.81 3933135AT 35 g.p.m. (2.21 L/sec.) 3 106.81 3933150AT 50 g.p.m. (3.15 L/sec.) 3 106.81 3944235AT 35 g.p.m. (2.21 L/sec.) 4 151.83 3944250AT 50 g.p.m. (3.15 L/sec.) 4 151.83 FLOW CONTROL EXTENSION KIT 392203W 3 57.96 392204W 4 65.91 NOTE: Use 3910A-4 for outlet baffle replacement on 7,10 and 15GPM compact models INLET/OUTLET BAFFLE Tank 3920A03-3 7-10-15/15C-20-25-35 64.87 3950A03-3 50 118.37 SFCD Required for, State of MA, City of San Francisco and City of New York. SPIGOT FORMAT FLOW CONTROL with Cleanout and Air Intake (PVC Grey) 3933125AS 25 g.p.m. (1.58 L/sec.) 3 124.99 3933135AS 35 g.p.m. (2.21 L/sec.) 3 124.99 3933150AS 50 g.p.m. (3.15 L/sec.) 3 124.99 3944235AS 35 g.p.m. (2.21 L/sec.) 4 151.83 3944250AS 50 g.p.m. (3.15 L/sec.) 4 151.83 OUTLET BAFFLE Tank 3910A-4 7-10-15C 61.25-8 -
INTERCEPTOR COMPONENTS & ACCESSORIES NOTE: Complete lid assembly excluding PDI plate which is to be transferred from old unit. LO-PRO INLET/OUTLET BAFFLE Tank 3925ALO-3 25LO 68.19 LID ASSEMBLY REPLACEMENT Lid 3910A-2ARPL 7-10-15C 302.26 3920A-2ARPL 15-20-25 337.50 3935A-2ARPL 25LO-25ALT-35-50 421.57 3925A-2ARPL 25XT 378.80 LO-PRO DIFFUSER ASSEMBLY Tank 3925A02LO-6A 25LO 302.27 REPLACEMENT LATCH KITS *Kit includes 4x latch components and replacement pivot pins. **Kit includes 4x latch components (2 LH & 2 RH) and replacement pivot pins. Lid 3920A-9RPL* 7-10-15C-20-25 65.91 3935A-6RPL** 25LO-25ALT-25XT-35-50 70.45 25XT 1 Piece Model DIFFUSER BAFFLE Tank 3935A03-4 25ALT-35-50 117.96 RISER EXTENSION Tank 3920AX6 20-25 693.16 3935AX6 25LO-25ALT-35-50 806.79 3925AX6 25XT 761.34 DIFFUSER BAFFLE-COMPACT MODELS Tank 3910A-3 7-10-15C 67.04 NOTE: Used to replace stripped/loosened cover fixing locations. FIXING REPLACEMENT/REFURB KIT 3925AX6 Contents 3920AR 2x insert/screws 23.86 SILICONE RUBBER LID GASKET Tank 3910A-5 7-10-15C 57.96 3920A-5 15-20-25 73.86 3935A-5 25LO-25ALT-35-50 96.59 3925XT-3 25XT 85.00 Note: Easy on-site solution for applications where local jurisdiction requires fixed baffles. GREASE INTERCEPTOR FIXED BAFFLE KIT Contents 392035FBK 2x stainless steel rivet 18.75-9 -
SOLIDS BASKET ACCESSORY NOTE: The Solids Basket Accessory is compatible with full height models of Endura Grease Interceptors 20GPM to 50GPM 3911A-1 N/A 472.71 NOTE: Installed as a integrated part of the plumbing to prevent debris from causing blockages. ENDURA IN-LINE DRAIN STRAINER For trap adapters and connections to other materials refer to IPEX ABS or PVC DWV fittings price list. All 1-1/2 fittings with SPG in their description can be fitted directly to IDS 1 1/2 hubs if required Material 393243A ABS 1-1/2 170.68 393243AW PVC 1-1/2 170.68 SOLIDS INTERCEPTOR INLET COVER Tank 3911-4 N/A 55.28 NOTE: Includes access cap, filter screen and o-ring seal. REPLACEMENT STRAINER & ACCESS CAP Material 393243AR ABS 70.45 393243AWR PVC 70.45 SOLIDS INTERCEPTOR COARSE SCREEN Tank 3911-2 N/A 52.95 SOLIDS INTERCEPTOR FINE SCREEN Tank 3911-3 N/A 52.95 Note: Required for (Allegheny County PA), PA code. Requires Ball Valve(s) for installation. SEMI-AUTOMATIC DRAW-OFF KIT (required for Philadelphia, PA code) 394000 3/4 198.95-10 - * Not NSF Certified
Z1 Water exits Installed on individual sink wastes in kitchen and sanitary applications, the Endura Inline Drain Strainer (IDS) prevents food debris, hair, lint and similar solid material from entering the drainage system, causing restriction and blockage. Waste water and debris from sink, basin or appliances Safeguards against the loss of valuable items such as rings & jewelry Strainer traps solids Product Dimensions Endura In-Line Drain Strainer Material A B C D Z1 393243A ABS 2.0 * 8.1 4.0 4.3 5.0 393243AW PVC 2.0 * 8.1 4.0 4.3 5.0 *Endura IDS is sized to accept connection width 1-1/2 diameter DWV pipe. Visit our website for more information Correct sizing is critical to the function of your interceptor. Find our GI sizing calculator online at: www.mygi.net - 11 -
FLOOR SINKS FLOOR FINISH CONCRETE STRUCTURAL SLAB STANDARD FLOOR (PVC-white body) Pipe Ctn/Qty 394708 4 Hub 9 x 9 x 6 5 100.24 394713 4 Hub 12 x 12 x 6 5 117.69 394718 3 Hub 9 x 9 x 6 5 94.69 394723 3 Hub 12 x 12 x 6 5 112.31 FLOOR SINK GRATES FULL GRATE - PVC white Ctn/Qty List Price 394709A 9 x 9 5 66.98 394712A 12 x 12 5 89.70 HALF GRATE - PVC white Ctn/Qty List Price 394709C 9 x 9 5 74.51 394712C 12 x 12 5 99.78 THREE QUARTERS GRATE - PVC white Ctn/Qty List Price 394709B 9 x 9 5 66.17 394712B 12 x 12 5 88.60 FLOOR SINK REPLACEMENT STRAINER Ctn/Qty List Price 394712-4 5 5 11.77 FLOOR SINK REPLACEMENT HARDWARE KIT Kit For Drains 3947NNH 394708 394709 394712 394713 Includes 2 of #10 x 1-1/2 Grate Screws and 12 of #10 x 5/8 Flange Screws List Price 14.77-12 -
PART# WEIGHT (Lbs.) CARTON BARCODE PG. # 3907A02 16.605 10662671055160 3 3910A-3 0.891 10662671055047 9 3910A-4 1.651 10662671055030 8 3910A-5 0.126 00662671052438 9 3910A02 16.612 10662671055139 3 3910PA15 12.399 10662671055771 5 3910A-2ARPL 3.241 00662671055026 9 3911A02 18.041 10662671055603 5 3911A-1 6.394 10662671055610 10 3911-2 0.71 10662671055511 10 3911-3 0.62 10662671055528 10 3911-4 0.379 10662671055535 10 3915A02C 16.603 10662671055108 3 3920A-2ARPL 5.152 00662671390486 9 3920A-5 0.194 00662671390233 9 3920A-9RPL 0.099 10662671390360 9 3920AR 0.084 10662671379051 9 3920AX6 8.045 10662671390353 9 3920A02 21.218 10662671390155 3 3920A03-3 1.755 10662671021813 8 3920PA15 21.288 10662671390612 5 392010 0.306 10662671058680 8 392011 0.346 10662671390520 8 392035FBK 0.004 10662671390391 9 392203W 0.683 10662671390537 8 392204W 1.299 10662671390544 8 3922107 1.01 10662671054910 7 3922107AS 1.407 10662671055085 7 3922110 1.012 10662671021974 7 3922110C 0.461 10662671063806 7 3922107AT 1.279 00662671055972 7 3922110AT 1.321 10662671055078 7 3922110CAT 0.769 10662671064032 7 3922110AS 1.409 10662671055061 7 3922110CAS 0.858 10662671063981 7 3922115 0.997 10662671390308 7 3922115C 0.45 10662671063813 7 3922115AS 1.396 10662671390551 7 PART# WEIGHT (Lbs.) CARTON BARCODE PG. # 3922115CAS 0.847 10662671063998 7 3922115AT 1.305 10662671390797 7 3922115CAT 0.758 10662671064049 7 3922120 1.005 10662671399097 7 3922120C 0.45 10662671063820 7 3922120CAS 0.847 10662671064001 7 3922120AT 1.314 10662671390803 7 3922120CAT 0.761 10662671064056 7 3922125 1.012 10662671391039 7 3922125C 0.452 10662671063837 7 3922125AS 0.853 10662671021981 7 3922125CAS 0.849 10662671064018 7 3922125AT 1.321 10662671021998 7 3922125CAT 0.761 10662671064063 7 3925A02LO 38.864 10662671390971 3 3925A02LO-6A 4.515 10662671058215 9 3925ALO-3 0.767 10662671022131 9 3925XTA02 35.612 10662671070323 3 3925XTA03 37.779 10662671070330 3 3925AX6 10.871 10662671070460 9 3925XT-3 0.192 00662671069801 9 393243A 1.332 10662671390407 10 393243AR 0.353 10662671390506 10 393243AW 1.784 10662671390490 10 393243AWR 0.43 10662671390513 10 3933125 2.617 10662671390186 8 3933125AS 3.583 10662671390575 8 3933125AT 3.501 10662671390810 8 3933135 2.604 10662671390193 8 3933135AS 3.569 10662671390582 8 3933135AT 3.488 10662671390827 8 3933150 2.595 10662671390209 8 3933150AS 3.561 10662671390599 8 3933150AT 3.479 10662671390834 8 3944235AS 7.269 10662671068580 8 3944235AT 6.998 10662671069457 8 3944250AS 7.009 10662671068573 8 3944250AT 6.671 10662671069464 8 PART# WEIGHT (Lbs.) CARTON BARCODE PG. # 3925A-2ARPL N/A N/A 9 3935A-2ARPL 11.614 00662671390318 9 3935A-5 0.176 00662671390257 9 3935A-6RPL 0.108 10662671390711 9 3935AX6 11.334 10662671390322 9 3935A03 47.773 10662671390100 3 3935A03-4 1.956 10662671022674 9 3935A04 50.125 10662671390124 3 394000 1.107 10662671390285 10 3944235A 4.956 10662671068559 8 3944250A 4.696 00662671068538 8 394708 3.66 10662671052701 12 394709A 2.075 10662671052916 12 394709B 2.218 10662671052923 12 394709C 2.218 10662671052930 12 394712A 3.757 10662671052961 12 394712B 3.757 10662671052497 12 394712C 3.757 10662671052503 12 394713 4.581 10662671052978 12 394718 4.189 10662671052992 12 3394723 5.113 10662671053029 12 3947NNH 0.093 10662671052558 12 3950A03 58.694 10662671390117 3 3950A03-3 2.253 10662671022940 8 3950A04 60.793 10662671390131 3 INTERCEPTOR SIZING & SELECTION Sizing your application is easy at www.mygi.net. Simply enter your sink dimensions and any additional appliances that will discharge through your interceptor. Choose and enter your drain period and the tool does the rest! It s that easy. CAUTION The Seller does not recommend the Endura Grease Interceptor for testing of plumbing systems with compressed air or compressed water. The use of Endura Interceptors during testing voids our warranty for the products so used. For further information, contact your IPEX USA LLC. representative. ENDURA Grease Interceptor 10 Year Extended Warranty The Endura Grease Interceptor is warranted for ten (10) years from the date of installation based on the receipt of acompleted warranty card (included with the grease interceptor). Said warranty card must be returned to the manufacturer within thirty (30) days of the installation date, in order to be eligible for this extended warranty. The ten (10) year warranty covers defects resulting from faulty manufacture of materials as well as perforation of the grease interceptor based on normal operating conditions. The manufacturer does not provide a warranty for perforation resulting from mechanical or chemical causes of abnormal use. The Endura Grease Interceptor is warranted only to the extent that the manufacturer will replace, without charge, products proven to have manufacturing defects or perforation (other than perforation resulting from mechanical or chemical causes) within the specified ten (10) year warranty period and provided the manufacturer has been given an opportunity to inspect the product alleged to be defective and the installation and use thereof. No warranty is provided for any expense for removal, reinstallation or other consequential damages arising from and defect or perforation. The warranties set out above are the only warranties made by the manufacturer and are expressly in lieu of all other warranties, expressed or - 13 - implied, including the warranties of merchantability and fitness for a particular purpose. Please Note: This warranty is offered by IPEX USA LLC. No claim should be placed upon the Installer or Service Company if properly installed and serviced. All Endura Grease Interceptors are tested and certified to Standard PDI-G101 of the Plumbing and Drainage Institute.
NOTES - 14 -
NOTES - 15 -
GREASE MANAGEMENT Eastern U.S. Customers Tel: (289) 881-0120 Toll Free: 1-800-463-9572 Fax: (905) 844-0826 Western U.S. Customers Tel: (303) 373-1918 Toll Free: 1-888-461-5307 Fax: (303) 373-1923 sales@ipexamerica.com