Fully Integrated 30 Bottom Mount 8mieleusa.com
SPECIFICATIONS Features: MasterCool controls ClearView lighting system Drop and Lock Shelves SmartFresh storage drawers FullView storage drawers Ice maker RemoteVision capable Acoustic door and temperature alarm Optical door and temperature alarm Energy Star KF 1803 Vi Item 38180301USA - Right Hinged KF 1813 Vi Item 38181301USA - Left Hinged Overall Unit Width Overall Unit Height Overall Unit Depth Niche Minimum Cabinet Opening Width Minimum Cabinet Opening Height Minimum Cabinet Opening Depth Plumbing Water Supply Requirements Water Connection Line Electrical 29 3 /4 (756 mm) 83 1 /2-85 3 /16 (2121 mm - 2165 mm) 24 (610 mm) 30 (762 mm) 83 5 /8 (2124 mm) 25 (635 mm)* Connect to a cold water supply only. Must be connected to a shut-off valve. The water shut-off valve must be accessible after installation. The water pressure must be between 25 psi (1.7 bar) and may not exceed 80 psi (5.5 bar). If the pressure is higher than 80 psi (5.5 bar), a pressure reducing valve must be installed. Standard 1/4 O.D flexible water line. The maximum outer diameter of the water pipe (without fittings): 3/8 (10 mm). Water line is not included. 110V / 120V, 60Hz, 15 Amps Electrical Requirements - Volts/Amps In the case of side-by-side installations, a separate outlet must be used for each appliance. Power Cord - Plug and length Yes - NEMA 5-15 plug, 5 ft (1.52 m) Custom Panel Please refer to the manual for further details. Maximum Panel Weight Upper door - 104 lbs (47 kg) Lower door - 22 lbs (10 kg) Maximum Panel Thickness 1 1 /2 (38 mm) Minimum Panel Thickness 3 /4 (19 mm) Shipping Shipping Weight 503 lbs (228 kg) Shiipping Dimensions 33 1 /2 W x 89 13 /16 H x 29 1 /4 D Support Call Miele 800.843.7231 Miele Website 8www.mieleusa.com 20/20 Link 82020technologies.com Page 2 of 8
FOR FLUSH INSTALLATION * Niche depth assumes a 3/4 (19 mm) panel, please adjust according to custom panel thickness Page 3 of 8
POWER SUPPLY AND WATER CONNECTION BACK VIEW Water connection is located in front of unit. 1/4 compression fitting is needed. Electrical - 5 foot (1.52 m) - 120 Volt - 15 Amp - NEMA 5-15 molded plug Water line - 1/4 flexible water line - not included LOWER HINGE LOCATION Hinge Upper Door FRONT VIEW Hinge Lower Drawer 29 29 1/8 - - 29 29 1/2" 1/2 (740-749 mm) 29 11/16 29 11/16" (754 mm) 1/2" 1/2 - - 2 2 3/8" 3/8 (13-60 mm) Page 4 of 8
CUSTOM PANEL INSTALLATIONS These units do not come equipped with a front panel. They are designed to accept a custom door panel supplied by the cabinet maker. Miele has a unique panel integration system which allows the panels to align with the surrounding cabinets. Panel size is determined in the following manner: Width: Thickness: 29 3/4" 3/4 in (756 all mm) casesin all cases Minumum Minimum 3/4 3/4" (19 outside mm) frame outside frame Standard Upper Panel Height: 53 5/16" 5/16 (1354 mm) Upper Panel Panel Height HOM Note: Finish back side of panels to insure appearance Panel may extend above unit. This is not considered in height calculation Upper Maximum panel weight: 104 103.6 Pounds Lower Panel Panel "B" Height TKH Lower Panel Height: Use the following calculation: Panel Height = HOM - 53 9/16 - (1360.5 TKH mm) - TKH HOM = Total height of machine. Can be adjusted to to match match adjoining cabinets - - typically 84" 84 (2133 HOM is mm). adjustable between 83 1/2" - 85 3/8" HOM is adjustable between 83 1/2 - TKH = 85 Toe-kick 3/8 (2121 height mm (2"-- 2165 8 3/8") mm) Lower TKH = Maximum Toe-kick height panel 2 weight: - 8 3/8 (51-212 22 Pounds mm) Upper Panel Notes Lower Maximum panel weight: 22 Pounds If the adjoining cabinets are taller than the height of machine (HOM) - the upper panel may be extended accordingly. Find the difference between height of the adjoining cabinets and the height of machine (HOM) and add to 53 5/16" Adjoining cabinet Extended Panel Machine Example: Ajoining cabinet height: 87 87" (2210 mm) Height of machine: 84 84" (2133 mm) Difference: 3 3" (76 mm) Extended panel height: 56 5/16 5/16" (1430 mm) Page 5 of 8
HINGING DETAILS 90 Door 115 Door Thickness options Thickness options 0-1/8 (3 mm) 0-1/8 (3 mm) 0-1/8" 0-1/8" 0-3/4 (19 mm) 0-3/4" 1 (25 mm) 1" 1-1/4 (32 mm) 1-1/4" 1-1/2 (38 mm) 1-1/2" 1-3/4" 1-3/4 (44 mm) 0-3/4 (19 mm) 0-3/4" 1 (25 mm) 1" 1-1/4 (32 mm) 1-1/4" 1-1/2 (38 mm) 1-1/2" 1-3/4 (44 mm) 1-3/4" 2" 2 (51 mm) Cabinet Front Cabinet Front 0-3/4 (19 mm) 1 (25 mm) 1-1/4 (32 mm) 1-1/2 (38 mm) 1-1/4" 1-1/2" 1" 0-3/4" Front Panel 0-3/4 (19 mm) 1 (25 mm) 1-1/4 (32 mm) 1-1/2 (38 mm) 1-1/2" 1-1/4" 1" 0-3/4" Front Panel Door Swing 7/16 7/16" (11 mm) Door Swing 11 3/4 (298 14 3/8" mm) MAX Max 32 11 32 /16 11/16" (830 mm) NOTE: Additional space needed depending on the thickness of front panels and handle used. Freezer units cannot be stop pinned at 90 NOTE: Additional space needed depending on the thickness of front panels and handle used. Freezer units cannot be stop pinned at 90 Page 6 of 8
HINGING DETAILS 115 o OPENING 0-1/8 (3 mm) 0-1/8" 0-3/4 (19 mm) 0-3/4" 1 (25 mm) 1" 1-1/4 (32 mm) 1-1/4" 1-1/2 (38 mm) 1-1/2" 1-3/4 (44 mm) 1-3/4" Cabinet Front 1-3/8 (35mm) 1-1/6 (29.6mm) 17/24 (18mm) 1/4 (6.4mm) 3 (76.2mm) 2-5/8 (67mm) 2-1/3 (59mm) 2-1/24 (52mm) 1-3/4 (44.5mm) 1-1/2 (38 mm) 0-3/4" 1" 1-1/4" 1-1/2" 0-3/4 (19 mm) 1 (25 mm) 1-1/4 (32 mm) Front Panel Door Swing Page 7 of 8
HINGING DETAILS 90 o OPEING 0-3/4 (19 mm) 0-3/4" 1 (25 mm) 1" 1-1/4 (32 mm) 1-1/4" 1-1/2 (38 mm) 1-1/2" 1-3/4 (44 mm) 1-3/4" 2 (51 mm) 2" 1-7/16 (36.5mm) 1-11/16 (43mm) 1-15/16 (49.2mm) 7/16 (11 mm) 1-3/16 (30mm) 0-1/8 (3 mm) 0-1/8" Cabinet Front Handle or object that is NOT flush with Cabinet Front. 0-3/4 (19 mm) 1 (25 mm) 1-1/4 (32 mm) 1-1/2 (38 mm) 1-1/2" 1-1/4" 1" 0-3/4" Front Panel r Swing When installing hinge side next to an appliance or object that is within range of the door panel, limit the door opening angle to 90 o. This is done by installing the banking pin as illustrated. Insert the banking pin through the holes and drive in with a hammer. Page 8 of 8