Dakshin Gujarat Vij Company Limited CIN U40102GJ2003SGCO42909 Regd. & Corporate Office: Urja Sadan, Nana Varachha Road, Kapodara Char Rasta,Surat 395 006 C & R DEPARTMENT Phone No.: 0261 2506100-200-175 Fax No.: 0261-2572636 Web Site: www.dgvcl.com E-mail : secom.dgvcl@gmail.com No. DGVCL/C&R/DSM/15/ : Tender For Supply of new BEE 5 Star Rated energy efficient ceiling fans with electronic regulator under Demand Side Management Programme for Subsidiaries of GUVNL (DGVCL, MGVCL, UGVCL & PGVCL) (A) SCOPE OF WORK:- 1. Scope :- The Scope of Work includes Supply of new BEE 5 Star Rated energy efficient ceiling fans with electronic regulator under Demand Side Management Programme for Subsidiaries of GUVNL (DGVCL, MGVCL, UGVCL & PGVCL). The detailed description of work is given below The bidder shall supply BEE 5 star rated energy efficient ceiling fan with electronic regulator at the desired location of the all DISCOMS. A BEE 5 Star Rated energy efficient Ceiling Fan will provide low power electricity consumption than the conventional ceiling fan. The BEE 5 star rated Energy Efficient Ceiling Fan consists of following components i. Fan, ii. Complete enclosed type fan motor iii. Blade in 3 Nos. iv. Capacitor as per IS Specification v. Clamping nut, bolt, washer etc. vi. One set of clamping device as extra. vii. Electronic open type Regulator with 5+ Off position viii. Wires for connection ix. Down rod. Scope of Work and Tech.Spec. (Sign. & Seal of the Bidder) (Page 1 of 7)
2. Quantity distribution of BEE 5 Star Rated energy efficient Ceiling Fans with electronic regulator and validity of order. The BEE 5 Star Rated energy efficient Ceiling Fans with electronic regulator are required to be supplied in following Electricity Distribution Companies (DISCOMs) viz DGVCL, MGVCL, UGVCL and PGVCL. Name Of DISCOMS/Name of beneficiary DGVCL MGVCL UGVCL PGVCL Qty in numbers in Nos. 43050 67754 35385 34400 180589 Note: quantity can be increase/decreased as per requirement. 3. Time Schedule for supply The BEE 5 Star Rated energy efficient Ceiling Fans with electronic regulator as per the quantity mentioned are required to be supplied within 07 month from the date of placing order. Scope of Work and Tech.Spec. (Sign. & Seal of the Bidder) (Page 2 of 7)
(B) TECHNICAL SPECIFICATION:- 1. BROAD PERFORMANCE SPECIFICATIONS Sr.No. Description Final 1 Blade sweep 1200mm(48 inch.) 2 Fan motor A.C. permanent capacitor single phase induction motor class 1 with basic insulation 3 Capacitor rating As per guideline of BEE 5 star rating and IS:374/79 and also comply with IS:1709/1984 with latest amendment 4 Rated voltage 220/240 volts, 50 Hz, 1-ph AC 5 Test voltage 230 volts, 50 Hz, 1-ph AC 6 Rated Frequency 50 Hz 7 Rated power input 52 Watt 8 Rated current As per IS:374/79 9 Rated power factor 0.9 lagging(min) 10 Rated speed 360 + / - 3% RPM 11 Rated air delivery 210 CMM Minimum 12 Rated service value 4.0 CMM / Watt 13 No. of Blades Three 14 Types of blade leaf 1.05 mm thick Aluminum Alloy sheet 15 Type of regulator Electronics (open type) No. of running 5 + Off position 16 positions 17 Type of Switch Rotary type 18 Speed regulation Min.50 % (approx.) Class of motor Class ''E'' 19 insulation 20 No. of Bearings Two ball bearings, Top 6202, Bottom 6201 as per IS specification 21 Motor wdg. Temp rise Shall not exceed 75 0 C over and ambient of 40 0 C by resistance method at 245 Volts 22 Insulation resistance Shall not be less than Two Mega Ohms(2 M Ohms) High voltage test Shall withstand 1.5 Kv,50 Hz AC between current carrying and non-current carrying metal parts without any flash over for one(1) 23 min 24 Leakage current Should not exceed 210 Micro Amp. 25 Type of down rod Length-300 mm, ID - 15 mm,od - 19 mm,ms Split shackle clips. 26 Finish White Powder coated with two gold lines with DGVCL logo. As per IS 13871 (1993): Powder Coatings [CHD 20: Paints, Varnishes and Related Products] 27 Tolerance of performance Power input, watt& current, Air Delivery & Fan Speed as per IS:374/1979 with latest amendment 28 Warranty 05 Years on site warranty Scope of Work and Tech.Spec. (Sign. & Seal of the Bidder) (Page 3 of 7)
Canopy: A cover shall be provided to partly or wholly conceal the hook and the shackle.with same colour as fan. BEE 5 star rated energy efficient Ceiling fan shall confirm to IS 374-1979, with latest amendments for performance and safety. Material of construction of motor enclosure shall be Mild Steel (MS). Earthing: Fan shall be provided with an earthing terminal or contact, which shall be indelibly marked with the symbol. The Suspension system of the ceiling fan shall be of adequate strength and shall withstand a minimum tensile load of 1000 kg without breakage and a torsion load of 500 kg cm without breakage. Each fan shall be supplied along with the following items for suspension of the fan: (i) (ii) (iii) (iv) Mounting bolt & nut : 3 nos (one set) with 1 no hole in each for fixing split pin (The hole shall be approximately at a distance of 4 mm from the nut end) Rubber bushing : 1 no. Split pin: 3 nos, split pin size: (Length: 41 mm, 2 mm Dia) shall be properly inserted to the hole of the mounting bolt One complete set of above items [ i), ii) & iii) ] shall be supplied extra as spare. Electronics Fan regulator : The regulator shall be capable of reducing the speed of at least 50% of the full speed at the rated voltage. Fans shall be capable of running on all the running positions of the regulator at the rated voltage & shall conform to IS: 11037/1984 (Reaffirmed 2005). Engraving : (i) Successful tender will require to engrave the words" DSM Programme-2016" on all ceiling fan. As per annexure 16. (ii) All ceiling fan must display the label for 5 star rated Energy Efficient Ceiling fan as per BEE. Technical Particular For BEE 5 star rated energy efficient Electric Ceiling Fans A. Specification: ISI marked electric BEE 5 star rated energy efficient ceiling fan capacitor type with double ball bearing complete with capacitor,300 mm down rod, canopies, shackles, three number blades made of aluminum alloy, suitable for single phase, AC 230 volt, 50 Hz supply and conforming to class I of IS: 374/1979 with latest amendment up to the last date of tender submission, As follows:- Sweep Size (mm): 1200 mm Type of Regulator: Electronic Open Type Scope of Work and Tech.Spec. (Sign. & Seal of the Bidder) (Page 4 of 7)
The down rod shall be capable to withstand a tensile load of 1000 Kg without breakage and a torsoin load of 500 kg cm without breakage as per cl. 10.14.1 of IS: 374/1979 with latest amendment. Item Description: down rod 300 mm B. Type Test Certificates:- 1. Tenderers shall furnish complete and satisfactory type test certificate as per T/E specification (IS374/1979 with latest amendment )for each Fan and electronic regulator to the Chief Engineer (IT, C&R) DGVCL with Bid. The TTC shall be from approved laboratory of (NABL) and BEE. 2. TTC shall indicate clearly and categorically the following parameters. a) Blade angle at root, elevation and at tip. b) Width of the blade and material of the blade. c) Capacitance value. d) Material of the body of the fan motor e) weight of the fan motor. C. TESTS AND TESTING FACILITIES : 1 ROUTINE TESTS: All the Routine tests as per IS: 374-1979 amended upto date shall be carried out before acceptance of bulk quantity. 1) Flash test 2) Insulation resistance 3) A simple running test to determine the Fan is in working condition. The details of facility available in the manufacturer's works in this connection should be given in the bid. 2 ACCEPTANCE TESTS: All Acceptance tests as per IS: 374/1979 and modified upto date including the optional test shall be carried out on sample taken from the delivery lot. The following acceptance test should be carried out 1. Starting 2. Fan speed & Input 3. Earthing Connections 4. Leakage current 5. High Voltage. 6. Additional test to determine Energy saving. Scope of Work and Tech.Spec. (Sign. & Seal of the Bidder) (Page 5 of 7)
3 TESTING FACILITIES: The supplier / tenderer shall clearly state as to what testing facilities are available in the works of manufacturer and whether the facilities are adequate to carry out type, routine and acceptance tests mentioned in IS : 374 ( amended upto closing date of tender ). The facilities shall be provided to purchaser s representative for witnessing the tests at the manufacturer s works. If any test cannot be carried out at manufacturer s works, reason should be clearly stated in the tender. All other requirements for this fans including testing procedures, tolerances, sampling plan and criteria of conformity sizes shall be as per IS:374/79 (with latest amendment ) & BEE. 2. QUALITY AND WARRANTY a. The BEE 5 Star Rated energy efficient ceiling Fan with electronic regulator will be warranted for a period of five and half years from the date of supply. b. The Warranty Card to be supplied with the system must contain the details of the system. The manufacturers can also provide additional information about the system and conditions of warranty as necessary. If any complain regarding BEE 5 star rated energy efficient fan, then beneficiary can directly approach to the supplier so that supplier has to give details of contact person s name, contact no., etc. The details shall be mentioned in warranty card. 3. OPERATION and MAINTENANCE MANUAL An Operation, Instruction and Maintenance Manual, in English and the Gujarati language, should be provided with the BEE 5 Star Rated energy efficient ceiling Fan. The following minimum details must be provided in the Manual: Basic principles of Operation. A small write-up (with a block diagram) on BEE 5 Star Rated energy efficient ceiling Fan - its components, like capacitor, motor, accessories,etc.. Type, Model number, voltage & wattage, capacitor used in fan. Clear instructions on regular maintenance and trouble shooting of the BEE 5 Star Rated energy efficient Ceiling Fans. DO's and DONT's. Name and address of the contact person for repair and maintenance 4. Submission of Test Report:- The test report of the BEE 5 Star Rated energy efficient Ceiling Fans is required to be submitted along with the tender for the test confirming to the standards and carried out from approved laboratory of NABL and BEE by the bidders. 5. Prequalification criterion of bidder: i. The Bidder shall be a manufacturer of BEE 5 star rated energy efficient ceiling Fan and having manufacturing experience of minimum Three year. Scope of Work and Tech.Spec. (Sign. & Seal of the Bidder) (Page 6 of 7)
ii. The bidder shall have all the facility in his works for design, assembly, quality assurance, testing (all routine and acceptance tests). iii. iv. The Bidder shall have minimum average annual turnover (audited balance sheet) of 2.25 crore in last three financial year ending on the 31 march of 2016. Experience of having successfully executed similar type of supply to reputed govt. organizations as specified in the document during the last seven years ending before last date of tender submission should be either of the following. (A) Single Purchase Order (PO) of min. 36118 nos of similar item each. OR (B) Two Purchase Order (PO) of min. 27088 nos of similar item each. OR (C) Three Purchase Order (PO) of min. 18059 nos of similar item each. v. Similar item supply means bidder has executed satisfactory supply of all type of ceiling fan to any govt. organization Scope of Work and Tech.Spec. (Sign. & Seal of the Bidder) (Page 7 of 7)