Early Birds Your GM Muscle Car Headquarters 1 800 463 0546 Visit www.early-birds.ca for most up-to-date catalog this copy was generated April 06 2019 Cutlass / Body Panels / Roof & Hoods Picture Product name Description SKU CAD 1964-1967 Hood Hinge Mounting Kit Hood hinge mounting kit for 1964-67 Cutlass and 442 models. Kit CUFSHMK647 services one car. 22.91 1964-1967 HOOD HINGE, LH THESE ARE GRAY PHOSPHATE PLATING LIKE ORIGINAL. CUAPD132L 90.85 1964-1967 HOOD HINGE, PAIR THESE ARE GRAY PHOSPHATE PLATING LIKE ORIGINAL. CUAPD133S 243.30 Early Birds Order Hotline: 1 800 463 0546 1964-1967 HOOD HINGE, RH THESE ARE GRAY PHOSPHATE PLATING LIKE ORIGINAL. CUAPD132R 90.85 1964-1967 Hood to Fender Rubber Bumper - Ea CUFSHB64 1964-1970 Hood Insulation Clips (Metal) - Ea Correct factory clips to attach your hood insulation pad CUREMCUT-HIC-0 01 3.99 1964-1970 Hood Insulation Clips (Plastic) - Ea Correct factory clips to attach your hood insulation pad CUREMCUT-HIC-0 05 1.99 1964-1972 Hood Adjuster Bolt Kit 2PC INCLUDES: Two adjuster bolts, two lock nuts and two rubber CUD1468F stoppers. 9.00 1964-1972 HOOD HINGE SPRING 9 3/8 High quality reproduction. Plated dull black finish. Correct spring CUHQW759 rate for use with the heavier SS hoods, works perfectly with for all listed steel hoods. Two required. Each. (Note: not for use with any fiberglass hood) Length 9 3/8" 28 coils Group 8.013 GM Part 23.62 Page 1/5
# 3848272 1964-1972 Hood Insulation These are exact replacements of the flame-resistant CUREMCUT-HIN-0 fiberglass-formed material. This factory machine-stamped set is 05 identical to the GM originals in fit and appearance when installed. Experience quieter engine noise and a dramatic increase in heat absorption with these quality reproductions Call for multiple colours, styles or patterns or choose online 47.99 1964-1972 HOOD STOP BOLTS WITH NUTS-PAIR All correct reproduction parts, not generic replacements. Plated. CUHQW401 Set of four pieces. 12.56 1966-1967 Door Hinge A Pillar Assembly - LH Excellent quality reproduction manufactured to duplicate the CUD1483X 361.00 1966-1967 Door Hinge A Pillar Assembly - RH Excellent quality reproduction manufactured to duplicate the CUD1483W 361.00 1966-1967 Roof Drip Rail Panels - PR New proprietary tooling in 2017. Accurate reproduction of CUHQR330 original. This is the metal the moldings attach to. Replace those commonly rusted and dented gutters for that show car look. ensures proper fit for new stainless moldings. GM Part #; RH 4543285, LH - 4543286Shipped Oversized 284.32 1966-1967 Roof Panel Skin It is often easier to replace the entire roof skin than to repair CUD1417X rusted areas. ÊIf you have rust under a vinyl top this item can be a real time saver. ÊMade to OE speicifications this skin covers the entire roof area and mates with the A pillars and quarter panels. 749.00 1966-1967 Windshield Pillar Post Inner Section - LH Excellent quality reproduction manufactured to duplicate the CUAM375-3466-2L 170.62 1966-1967 Windshield Pillar Post Inner Section - RH Excellent quality reproduction manufactured to duplicate the CUAM375-3466-2R 170.62 1966-1967 Windshield Pillar Post Outer Section - LH Excellent quality reproduction manufactured to duplicate the CUD1461K 165.00 1966-1967 Windshield Pillar Post Outer Section - RH Excellent quality reproduction manufactured to duplicate the CUD1461J 165.00 Page 2/5
1968-1969 Hood to Fender Rubber Bumper - Ea 1968-1972 A-Pillar Outer Cover - LH Excellent quality reproduction manufactured to duplicate the CUAM375-3468-1L 132.70 1968-1972 A-Pillar Outer Cover - RH Excellent quality reproduction manufactured to duplicate the CUAM375-3468-1R 132.70 1968-1972 Hood Hinge Mounting Kit Hood hinge mounting kit for 1968-72 Cutlass and 442 models. Kit CUFSHMK682 services one car. 22.91 1968-1972 Hood Pop Up Spring New OEM factory hood pop up spring. Mounts on the core CUPPZ400776 support and assists the hood when it s released to open. Over years of use, the spring tension loosens and doesn t open the hood properly. 22.58 1968-1972 Lightweight Hood Springs - Heavy - Pair Fits heavier fiberglass hoods CUPPLWHSH 69.50 1968-1972 Lightweight Hood Springs - Standard - Pair Fits standard fiberglass hoods CUPPLWHS 69.50 1968-1972 Roof Panel This is a full replacement GM A-body roof panel which saves a lot CUD1418 of time and money over attempting to repair a rusted out or badly dented original roof panel. 628.00 1969 Hood Release T Handle (w/clip) New reproduction outside hood release handle for 1969 Cutlass, CUFSHRH690 442, 88 and 98 models. Plastic T handle, includes retainer clip. 30.02 1969 Hood Tongue (ABS Plastic) Hood tongue made out of abs plastic 86.88 1969 Hurst Olds Factory Hood Scoop We now have a 100% authentic factory hood scoop. It is made CUPPZHO69B out of injection molded reinforced fiberglass. It has ten mounting studs to mount in all factory holes. First time available from The Parts Place. You cannot tell it from one made for Hurst in 1969. This scoop weighs 12 lbs. No other company has one like this - it is 100% correct. You can now replace your damaged original with this new show quality part. Page 3/5 CUFSHB68 CUPPZHT69B 417.10
1969-1970 Hood Extension Seal Hood extension seal for all 1969-70 Cutlass, 442 and F-85 CUFSHES690 models. This is the gasket that goes between the hood edge and the extension between the grilles. 7.90 1969-1970 RAM AIR HOOD KIT (INCLUDES STEEL FRAMED RAM AIR HOOD, FACTORY CUPPBP8523T CHROME TWIST PINS WITH STAINLESS ESCUTCHEONS, PIN RETAINERS & CORE SUPPORT LOCKING BRACKETS) 1546.80 1969-1970 W25 Ram Air Hood (w/steel Frame) This hood features the steel frame and injection molded CUD1874 fiberglass upper and functional Ram Air section like GM originally made. Accepts the factory hood hinges and hood springs for the steel hood, uses center hood latch on core support and original hood twist pins (sold separately). New factory style hood hinge for right or passenger side. Fits all CUPPZHH69LB 1969 / 1970 / 1971 and 1972 Cutlass or 442 / W30 / W31 / Rally 350 models. Replace your worn out hinge and get the proper hood alignment on your factory steel or Ram Air hood. Fit all model hoods. New factory style hood hinge for right or passenger side. Fits all CUPPZHH69RB 1969 / 1970 / 1971 and 1972 Cutlass or 442 / W30 / W31 / Rally 350 models. Replace your worn out hinge and get the proper hood alignment on your factory steel or Ram Air hood. Fit all model hoods. 1775.00 1970 Hood Extension (Metal) Hood extension for all 1970 Cutlass, 442 and F-85 models. This CUFSHE700 new metal extension for between the grilles attaches to the hood and is manufacured using new tooling and original material. You must drill the holes for your emblem or numerals. Save your old hood extension for use as a pattern. 140.62 1970 Hood Tongue (ABS Plastic) Hood tongue made out of abs plastic 86.88 1970-1972 Hood Latch Hood latch for cars with inside hood release. This hood latch CUPPZHRL70B assembly mounts on core support and is designed to accept the inside hood release cable. Fits 1970-72 Cutlass & 442 and 1969-70 GTO. (Will work on 68 GTO) Cable is not included. 1970-1972 HOOD LATCH INSIDE RELEASE ASSEMBLY Hood latch assembly for cars with inside hood release. Fits CUPPZHL70B 1970-1972 Cutlass models and 1969-1970 GTO but will work on 1968 GTO also. Includes hood release cable, handle and latch. 208.54 1970-1972 Hood Lock Brackets (w/oai hood) - PR Hood lock brackets for 1970-72 Cutlass and 442 models with CUFSHLB702 Outside Air Induction. Brackets mount on top of radiator core support to accept the chrome hood locks. Sold in a pair, includes mounting hardwars. 118.50 1970-1972 Hood Lock Chrome Fastener (w/retainer) - Ea Chrome Hood Locks used on all 1970-72 Cutlass and 442 CUFSHL7025 equipped with the Outside Air Induction (Ram Air) Hood. Includes retainer. 60.83 1969-1972 Hood Hinge - LH 1969-1972 Hood Hinge - RH Page 4/5 CUPPZHT70B
1970-1972 Hood Lock Chrome Fastener Set (w/retainers) - Chrome Hood Lock SetÊused on all 1970-72 Cutlass and 442 CUFSHL7025P PR equipped with the Outside Air Induction (Ram Air) Hood. Includes retainers. Sold as set of 2 locks 121.66 1970-1972 Hood Lock Retainer - Ea Hood lock retainer for 1970-72 Cutlass and 442 models with CUFSHLR7025 Outside Air Induction. Two per car, sold each. Retainer used to hold hood lock in place when hood is unlocked. Prevents hood lock from separating from hood. Included with our hood locks. 15.01 1970-1972 Hood Release T Handle (w/clip) Hood release T handle for 1970-72 Cutlass and 442 models. CUFSHRH702 New exact reproduction of a hard to find often broken part. Handle includes retainer clip. 30.02 1970-1972 Hood to Fender Rubber Bumper - Ea 1970-1972 INSIDE HOOD RELEASE HANDLE and CABLE Housing and cable assembly with chrome lever. Fits all 1970-72 CUPPZHC70B Cutlass / 442 models. This was only used as an accessory on 1969 and 1970 GTO but will work on 1968 GTO also. 1970-1972 Rear Hood Bumper on Cowl - Ea 10.27 Early Birds specializes in hard-to-find Cutlass parts and has been serving you for over 25 years. Call us at 1 800 463 0546 Mon - Fri 9:00 AM - 4:00 PM (EST) - we know our cars! Fax your order: (416) 630 8794 Our Mailing Address: Early Birds 25 Saunders Road, Unit 9 Barrie, Ontario L4N 9A7 Canada Page 5/5 CUFSHB70 CUFSHB75