DIESEL FORKLIFT TRUCKS

Similar documents
DIESEL FORKLIFT TRUCKS

ELECTRIC FORKLIFT TRUCK

FH60-2 FH70-2 FH80-2 FH80. EU Stage 3B Engine DIESEL FORKLIFT TRUCK HORSEPOWER RATED CAPACITY LOAD CENTER kg. 600 mm

DX50 SERIES. Diesel Forklift Trucks 6.0 TO 8.0 TON

3.5 / / 5.0 ton

10-16 ton. Diesel Pneumatic-Tyre Trucks EPA Tier 3/EU Stage IIIA Emission Compliant. Printed in Japan shi

3.5 / / 5.0 ton

FH35-2/FH40-2/FH45-2/FH50-2

3.5 / / 5.0 ton

HIGH-CAPACITY IC PNEUMATIC

EX50 SERIES. Diesel Pneumatic-Tyre Trucks 10 TO 16 TON

HIGH-CAPACITY IC PNEUMATIC

PNEUMATIC TIRE FORKLIFT

CX50 Pneumatic. 8,000 thru 11,000 lbs. Capacity. Preliminary Specifications

ton. DIESEL and GASOLINE FORKLIFT TRUCKS

n Photo may include optional equipment HYUNDAI DIESEL FORKLIFT TRUCKS - Applied Tier 3 Engine 250D-7E

n Photo may include optional equipment HYUNDAI DIESEL FORKLIFT TRUCKS - Environmental-Friendly 180D-7E

10-16 ton. Diesel Pneumatic-Tyre Trucks. EPA Tier 2/EU Stage II Emission Compliant

Diesel Counterbalance Trucks HYUNDAI HEAVY INDUSTRIES

MOVING YOU FURTHER HYUNDAI HEAVY INDUSTRIES

Building a better future. HYUNDAI LPG FORKLIFT TRUCKS Applied Tier 4 Engine 15/18/20L-7M

HIGH-CAPACITY IC PNEUMATIC

n Photo may include optional equipment HYUNDAI DIESEL FORKLIFT TRUCKS - Stage IIIB emissionised engine 50/60/70D-7A

Building a better future. HYUNDAI LPG FORKLIFT TRUCKS Applied Tier 4 Engine 15/18/20L-7M

BX COMPACT SERIES

Platinum II Nomad Series

Performance Enhanced For stage IV MOVING YOU FURTHER HYUNDAI HEAVY INDUSTRIES. n Photo may include optional equipment

Some of the photos may include optional equipment. HYUNDAI DIESEL FORKLIFT TRUCKS Applied Tier 3 Engine 250D-7E PLEASE CONTACT

Platinum II Nomad Series

Platinum GO4 Diesel. Engine Powered Forklifts. EPA Tier 4 Diesel 8,000 11,000 lbs. Capacities l Pneumatic Tire

DX50 PNEUMATIC TIRE FORKLIFT. The Forklift With Proven Ability. 15,400 18,000 LBS. CAPACITY DIESEL

Platinum II Series. 3,000 8,000 lb. Capacities. Cushion Tire / Engine Powered Models / LPG, Gasoline, Dual Fuel

ton AX50 / BX50 Series. Materials and specifications are subject to change without notice is a trademark of Komatsu Ltd.

Performance Enhanced For Stage IV Engine MOVING YOU FURTHER HYUNDAI HEAVY INDUSTRIES. Photo may include optional equipment

Platinum II Series. 3,000 7,000 lb. Capacities. Pneumatic Tire / Engine Powered Models / LPG, Gasoline, Dual Fuel, Diesel

CORE IC PNEUMATIC SPECIFICATIONS LBS. REACH NEW HEIGHTS CLASS 8FGU FDU15-32 INTERNAL COMBUSTION ENGINE PNEUMATIC TIRE

Some of the photos may include optional equipment. HYUNDAI LPG FORKLIFT TRUCKS Applied Tier 4 Engine 15/18/20LC-7M

Performance Enhanced For Stage IV MOVING YOU FURTHER HYUNDAI HEAVY INDUSTRIES. n Photo may include optional equipment

HYUNDAI HEAVY INDUSTRIES

LARGE IC PNEUMATIC SPECIFICATIONS LBS. REACH NEW HEIGHTS CLASS 8FGU FDU60-80 INTERNAL COMBUSTION ENGINE PNEUMATIC TIRE

50/60/70D-7A. EUROTRADING MORTIER Torhoutbaan ICHTEGEM Tel Fax

HYUNDAI HEAVY INDUSTRIES Atlantic Blvd Norcross, GA TEL (678) FAX (678) With Tier4 Final Engine installed

Diesel Counterbalance Trucks MOVING YOU FURTHER HYUNDAI HEAVY INDUSTRIES. Photo may include optional equipment

20L/25L/30L-7. Dimension. Specification. FORKLIFT TRUCKS Environmentally - Friendly PLEASE CONTACT. Some of the photos may include optional equipment.

STANDARD SPECIFICATIONS MAST SPECIFICATIONS & RATED CAPACITIES: ZX-60 & ZX-70

Diesel Counterbalance Trucks MOVING YOU FURTHER HYUNDAI HEAVY INDUSTRIES. Photo may include optional equipment

Platinum ll Series. Engine Powered Forklifts. Gas, LP, Dual Fuel 3,000-7,000 lbs. Capacities I Pneumatic Tire

HYUNDAI DIESEL FORKLIFT TRUCKS Applied Tier 4 Interim Engine 110/130/160D-7A

35/40/45DS-7E 50DA-7E DIESEL FORKLIFT TRUCKS Environmental - Friendly. n Photo may include optional equipment.

PNEUMATIC TIRE FORKLIFT 15,500 LB CAPACITY LP DIESEL MODELS

Platinum II Nomad Series

Forklift Truck Capacity to kg H 420 H 460 SERIES 356

FGC35K-FGC70K 7,000 15,500 LB CAPACITY CUSHION TIRE FORKLIFT

n Photo may include optional equipment HYUNDAI DIESEL FORKLIFT TRUCKS - Applied Tier 3 Engine 50/60/70/80D-7E

50/60/70/80D-7E. The print quality of this copy is not an accurate representation of the original.

4,500 2,000 2,000 9,891 / 1,188 2,779 / 3, x 16 x 12pr x 12 x 12pr 1,140 2, x 150 x 1,220 1, / / 450.

15/18/20L(G)-7M. Specification. Dimension. HYUNDAI LPG FORKLIFT TRUCKS Applied Tier 4 Engine PLEASE CONTACT. h10 I2 I e. b12.

180D-7E. HYUNDAI DIESEL FORKLIFT TRUCKS Applied Tier 3 Engine PLEASE CONTACT. Some of the photos may include optional equipment.

MID IC PNEUMATIC REACH NEW HEIGHTS

Platinum ll Nomad Series

THINK INSIDE THE BOX

CX 50 P N E U MATI C TI R E FO R K LI FTS. The Forklift With Proven Ability. Courtesy of Crane.Market 8,000 11,000 LBS. CAPACITY GAS, LPG & DIESEL

PNEUMATIC TIRE FORKLIFT 15,500 LB CAPACITY LP DIESEL MODELS THE HEAVY-DUTY FORKLIFT BUILT TO HANDLE TOUGH LOADS

Heavy-Duty Forklift Trucks

Engine Powered Forklift Trucks. FD-A2 Series. EPA Tier 4 Diesel Engine. Specification Sheet. 8,000-11,000 lbs. Class V Pneumatic Tire Type

Optional Items. Various Attachments

1,200 / 1,916. pneumatic PR PR. x2 / Travel speed, unloaded. FOOT Some of the photos may include optional equipment. 6.

CORE IC CUSHION REACH NEW HEIGHTS

Internal Combustion Pneumatic Tire Lift Trucks

Manufacturer. Manufacturer s type designation. Drive: electric (battery or mains),diesel,petrol,fuel gas,manual

Specification. Dimension MOVING YOU FURTHER. Mast Specification. Load Capacity. Optional Items HYUNDAI CONSTRUCTION EQUIPMENT.

Hyundai 20DA-7E DIESEL seated 2, ,410 3,116 4,478 / 643 1,200 / 1,916. pneumatic PR PR x2 /

HYUNDAI HEAVY INDUSTRIES

seated 4,500 2,000 2,000 6,579 9,891 / 1,188 2,779 / 3, x 16 x 12pr 7.00 x 12 x 14pr 7.00 x 12 x 12pr 1,282 1,140 1,140 8 / 10 2,220

100D/120D/135D/160D-7

HYUNDAI HEAVY INDUSTRIES

Pneumatic Tire Forklift. 15,500 lb capacity LP Diesel models THE HEAVY-DUTY FORKLIFT BUILT TO HANDLE TOUGH LOADS

LARGE IC CUSHION REACH NEW HEIGHTS

7 - S E R I E S P N E U M A T I C 3, ,5 0 0 L B S S P E C I F I C A T I O N S

HYUNDAI HEAVY INDUSTRIES

HYUNDAI HEAVY INDUSTRIES

110D/130D/140D/160D-7E

Engine-Powered Forklift Trucks ton (Counter-Balanced Type)

Electric Counterbalance Trucks HYUNDAI FORKLIFT

n Photo may include optional equipment HYUNDAI LPG FORKLIFT TRUCKS - Applied Tier 4 Engine 35L/40L/45L/50L-7A

Some of the photos may include optional equipment. HYUNDAI LPG FORKLIFT TRUCKS Applied Tier 4 Engine 60L/70L-7A

EFG 425 S30. Electric Four-Wheel Counterbalanced Trucks (5,000 6,500 lbs.)

Some of the photos may include optional equipment. 60/70L-7A

The Toyota Tonero Range

Some of the photos may include optional equipment. HYUNDAI LPG FORKLIFT TRUCKS Applied Tier 4 Engine 25LC/30LC-7M 25GC/30GC-7M

MOVING YOU FURTHER HYUNDAI HEAVY INDUSTRIES

EQUIPMENT OPERATING WEIGHT

1.5 5 ton Flexilift_1.5-5 ton Brochure_20pp.indd 1 13/10/ :55 pm

PNEUMATIC TIRE FORKLIFT 3,000-7,000 LB CAPACITY LP GAS, GASOLINE AND DIESEL MODELS YOUR GO-TO PNEUMATIC TIRE FORKLIFT TRUCK

1B1 U-model ton. at 500mm Load Center. SH1B1U-4 / 30 Sep. 13

Engine powered forklift ton

LPG Forklift Trucks Capacity 5000, 5500, 6000 and 6500 lbs. H25CT, H27CT, H30CT, and H32CT HYDROSTATIC, CUSHION TIRE SERIES

PNEUMATIC TIRE FORKLIFT 3,000-7,000 LB CAPACITY LP GAS, GASOLINE AND DIESEL MODELS YOUR GO-TO PNEUMATIC TIRE FORKLIFT TRUCK

Diesel Pneumatic Tire Lift Truck. Capacity: 15,500 lb

EFG 540k S50. Electric Four-Wheel Counterbalanced Trucks (8,000 11,000 lbs.) Broad capacity range for enhanced flexibility

Transcription:

RATED OUTPUT Gross: 129 kw 173 HP / 2200 min-1 Net: 122 kw 164 HP / 2200 min-1 Gross: 165 kw 221 HP / 2200 min-1 Net: 154 kw 207 HP / 2200 min-1 CAPACITY - 25000 FD 250 DIESEL FORKLIFT TRUCKS Photos may include optional equipment.

D IESEL F ORKLIFT T RUCKS WALK-AROUND Productivity High Performance Komatsu Engine Heavy Duty Brakes Automatic Transmission Large Fuel Tank Three Independent Hydraulic Circuits Safety & Comfort Comfortable Cab Design Pillar-less Cab Operator Presence Sensing System See page 5. See pages 4. Serviceability & Reliability Excellent Serviceability Engineered for Reliability Information & Counication Technology Komatsu Machine Tracking System See page 6. See page 6. 2

DIESEL FORKLIFT TRUCKS RATED OUTPUT Gross: 129 kw 173 HP / 2200 min-1 Net: 122 kw 164 HP / 2200 min-1 Gross: 165 kw 221 HP / 2200 min-1 Net: 154 kw 207 HP / 2200 min-1 CAPACITY - 25000 3

D IESEL F ORKLIFT T RUCKS PRODUCTIVITY Komatsu develops and produces major components such as engines and engine controllers in house. Since the engine and the truck work in harmony with Komatsu Technology, achieves high levels of productivity. High Performance Komatsu Engine is powered by the Komatsu SAA6D107E-1 engine with 6-cylinders and 6.7liter displacement. This engine is also used in Komatsu construction machinery, and its durability is field-proven. The Komatsu engine is highly efficient and environment-friendly, and brings out the greatest performance of the truck. Low Emissions The Komatsu SAA6D107E-1 engine is designed to meet U.S. EPA Tier 3 and EU Stage 3A emission regulations, which require 40% less NOx + HC (Hydrocarbon) emissions compared to the second stage regulations. Fuel Economy Komatsu original High Pressure Coon Rail (HPCR) fuel injection system with an electronic controller optimizes fuel combustion, realizes fuel economy and HIGH POWER CLEAN DIESEL ENGINE low emissions. SAA6D107E Heavy Duty Brakes Automatic Transmission Sealed wet disc brakes with independent and large capacity 4-speed automatic transmission is equipped as standard. brake oil cooler realize superior overheating resistance. A suitable gear is automatically selected accordingly The brake performance is consistent even in harsh to the travel speed. The operator is freed from frequent applications. Brake discs are sealed and protected from gear changes, and the acceleration is smooth from gear water, dust, and debris, therefore its service life is longer to gear. and it is highly reliable. *4-Speed manual transmission is also available as an option Large Fuel Tank Large fuel tank enables non-stop multi-shift operation. Its capacity is 400L for and 600L for. Less refueling stops means more uptime and increases productivity. Three Independent Hydraulic Circuits Hydraulic circuits are independent for the lifting, steering and brakes. They are individually driven by three pumps, therefore lifting while steering is very Sealed wet disc brakes smooth. 4

DIESEL FORKLIFT TRUCKS WA380-6 SAFETY & COMFORT Comfortable Cab Design Pillar-less Cab Variety of features are incorporated into the cab to enhance All four corners of the cab are pillar-less and enables operator s work place comfort. non-obstructed views. The superb all-around views enhance safety of operation. Suspension Seat Suspension seat with armrests is equipped. Fore-aft, seat height, lumber support and weight adjustments are provided. Air Conditioner Air conditioner has three outlet ducts, located on the front right, left and rear of the cab. Climate-controlled air is lead to the operator from all directions. Full-floating Cab Four rubber mounts insulate the cab from the chassis, thus the operator is not directly exposed to the engine vibrations. Large Handrails Large handrails provide firm grips for the operator, and wide steps enable easy entry and exit of the truck. Operator Presence Sensing System Operator Presence Sensing system allows traveling or lifting only when the operator is properly positioned in the operator s seat. If the operator is off from the position while traveling or lifting, traction power is disengaged*, control levers are locked, and an alarm buzzer sets off. * Traction power is disengaged but brakes are not automatically applied. 5

D IESEL F ORKLIFT T RUCKS SERVICEABILITY & RELIABILITY Excellent Serviceability Engineered for Reliability Easy Access incorporates various components that are also used in Komatsu construction machinery. With Komatsu It is easy to access internal components from the top hood Technology, the truck achieves high level of reliability. and side covers. The top hood is gas spring assisted and it can be opened and closed easily. Side covers are fitted with latches so that they do not close unintentionally. High Cooling Capacity The cooling system incorporates large capacity radiator and Serviceability is excellent and routine checks can be done after-cooler. In addition, individual oil coolers are provided easily. for hydraulic, brake and torque converter oil lines. High cooling capacity enables superb overheat resistance. Sealed Connectors for Electrics Water tight and dust resistant sealed connectors are incorporated to the connections between major harnesses and controllers. The sealed connectors are widely used in Komatsu construction machinery and their reliability is well proven in the field. Sealed connector Hydraulic Connections with O-ring Seals Hydraulic connectors in the truck are flat face-to-face O-ring seal type, which provides secure seal to prevent oil leakage. Additional Fuel Pre-filter with Water Separator They are also widely used in Fuel pre-filter with water separator is equipped in addition to Komatsu construction the main fuel filter to ensure water and contaminants are machinery and their reliability is removed. The engine and the fuel injection systems are well field proven. Hydraulic connections with o-ring seals protected. INFORMATION & COMMUNICATION TECHNOLOGY Komatsu Machine Tracking System Mobile phone network Customer KOMTRAX* sends machine information via mobile phone network and stores them in a Komatsu server. It allows you to analyze the machine utilization, grasp the fuel consumption, schedule the maintenance, and more. Global Positioning System (GPS) Satellite Internet Distributor KOMTRAX helps you to keep your machine operating at a peak performance and reduces your operating costs. Server * KOMTRAX is available for limited countries and regions. Please check with Komatsu representatives for availability of KOMTRAX in your area. 6

DIESEL FORKLIFT TRUCKS WA380-6 SPECIFICATIONS Others Model Power Type Operation Type Rated Capacity Load Center Load Distance Wheelbase Service Weight Manufacturer's Designation Electric, Diesel, Gasoline, LPG, Cable Diesel Diesel Sitting Sitting Q Rated Capacity [16600] 25000 900 [1220] 1220 c Rated Load Center x Front Axle Center to Fork Face 925 [1025] 955 [1060] y 3700 4400 27670 [28500] 32850 [33500] Front 43715 53100 Loaded Rear 3955 4750 Axle Loading Front 13850 15755 Unloaded Rear 13820 17095 Tire Type Pneumatic Pneumatic Front 14.00-24-20PR 14.00-24-24PR Tire Size Rear 14.00-24-20PR 14.00-24-24PR Number of Wheel Front/Rear (x=driven) 4x/2 4x/2 Tread, Front b10 2230 2230 Tread, Rear b11 2265 2265 Tilting Angle a / b Forward/Backward degree 6/12 6/12 Mast Height, Lowered h1 2-stage Mast 3640 3800 Std. Free Lift h2 2-stage Std. Mast, from Ground 0 0 3000 3000 Std. Lift Height h3 2-stage Std. Mast, from Ground Mast Height, Extended h4 2-stage Std. Mast 5130 5290 Height, Overhead Guard h6 3705 3705 Length, with Std. Forks L1 7205 [7905] 8695 [8800] Length, to Fork Face L2 5385 [5485] 6275 [6380] Width, at Tire b1 3095 3095 95 x 280 x 1820 [100 x 280 x 2420] 107 x 310 x 2420 [107 x 310 x 2420] Forks s/e/l Thickness x Width x Length Width, Fork Carriage b3 2500 [2730] 2500 [2760] m1 Under Mast 325 305 Ground Clearance 400 395 m2 at Center of Wheelbase Right Angle Stacking Aisle* Ast plus load length 6175 [6275] 6805 [6910] Turning Radius Wa 5250 5850 Loaded km/h 17 24 5.1 Travel Speed (FWD) Unloaded km/h 28 32 Loaded /s 270 275 5.2 Lifting Speed Unloaded /s 295 285 Loaded /s 350 350 5.3 Lowering Speed Unloaded /s 350 350 5.6 Max. Drawbar Pull Loaded 1.5 km/h, 3 min rating kn 80 103 5.8 Max. Gradeability Loaded 1.5 km/h, 3 min rating % 17 18 Foot/Wet Disc Brake Foot/Wet Disc Brake 5.10 Service Brake Operation/Type 5.11 Parking Brake Operation/Control Hand/Mechanical Hand/Mechanical 5.12 Steering Type Power Steering Power Steering Voltage/Capacity at 5-hour rating V/Ah 24/88 24/88 6.4 Battery Make KOMATSU KOMATSU 7.1 Model SAA6D107E-1 SAA6D107E-1 7.2 Rated Output, SAE net kw 122 154 2200 2200 7.3 Rated RPM min-1 Nm/min-1 575/1600 931/1500 7.3.1 Max. Torque, SAE net 7.4 No. of Cylinder/Displacement cm3 6/6690 6/6690 7.6 Fuel Tank Capacity L 400 600 8.2 Relief Pressure for Attachment Mpa 20.6 20.6 8.2.1 Hydraulic tank Capacity L 324 475 8.7 Transmission TORQFLOW TORQFLOW * : Right Angle Stacking Aisle does not include any operational clearance. b11 b1 b3 b10 Wa h4 h1 h6 h3 x y L2 L1 LOAD CAPACITY CURVE FD200 Capacity () 1.2 1.3 1.4 1.5 1.6 1.8 1.9 2.1 2.2 2.2.1 2.3 2.3.1 3.1 3.2 3.3 3.5 3.6 3.7 4.1 4.2 4.3 4.4 4.5 4.7 4.19 4.20 4.21 4.22 4.24 4.31 4.32 4.33 4.35 DIMENSIONS Mast height 3m, 3.5m, 4m, 5m 18000 17000 16000 Mast height 6m 14000 12000 11000 9001000 1400 1800 Load center () FD250 25000 24000 Capacity () I.C Engine Performance Dimensions Tires Weight Characteristics SPECIFICATIONS Mast height 3m Mast height 3.5m, 4m, 5m 22000 Mast height 6m 18000 16000 14000 1220 1500 1800 2100 2400 Load center () [ ] : Value of hydraulic fork positioner with side shift function MAXIMUM LOAD AND OVERALL HEIGHT OF MAST BY LIFTING HEIGHT 䡵 2-stage free view mast Load capacity () maximum fork height () Overall height [Lowered / Extended] () (load center 900 ) (load center 1220 ) 3000 25000 3640/5150 3800/5310 3500 24000 3890/5650 4050/5810 4000 24000 4140/6150 4300/6310 5000 24000 4840/7350 5000/7510 6000 17000 22000 5340/8350 5500/8510 model 7

STANDARD EQUIPMENT Komatsu SAA6D107E-1 diesel engine (U.S. EPA Tier 3 and EU Stage 3A emission compliant) HPCR fuel injection system Electronic engine control system 4-Speed automatic transmission Heavy-duty wet disc brakes with independent oil cooler Fully hydrostatic power steering Upward exhaust pipe Cyclone air cleaner (double element) with rain cap Additional fuel pre-filter with water separator Steel cab Air conditioner Operator's seat with suspension and armrests (reclining, height adjust, fore-aft adjust, lumber support adjust and weight adjust) Operator Presence Sensing System Tiltable steering column Standard directional lever (left) Combination switch (turn signal lamp & lamp switch) Speedometer Hour meter (service meter) Engine coolant temperature gauge Fuel gauge Torque converter oil temperature gauge Battery charge circuit caution lamp Air cleaner element warning lamp Coolant level warning lamp Parking brake pilot lamp Engine warning lamp Central warning lamp Neutral pilot lamp Lifting interlock caution lamp Headlamps (with Hi-Lo beams) Turn signal lamps Rear combination lamps Back-up buzzer Rear view mirrors Rear under mirror Fuel tank level gauge (truck side) Hydraulic oil tank level gauge (truck side) Fuel cap with key Two rear working lamps on counterweight Back-up buzzer (large sound) Tilt cylinder boots Power steering cylinder boots Rear under mirrors (2pc) Centralized grease piping (mast, rear axle) Tool kit Additional control valves and levers for attachments Attachment: Hydraulic fork positioner with side shift function Tire: Front double tires, pneumatic Rear single tire, pneumatic Attachment: Manual type fork positioner Fork: 1820 (standard for ) 2420 (standard for ) OPTIONAL EQUIPMENT Overhead guard specification Canvas cab Front glass with wiper Front glass without wiper Heater & defroster Overhead guard cover 4-Speed manual transmission Cyclone air cleaner (double element) with pre-cleaner Directional lever (right) Flash beacon (yellow, red) Two front working lamps (fender) Working lamps (2 on mast, 2 on counterweight) One rear working lamp on counterweight www.komatsu.com CEN00716-00 Fork: 2420 (option for ) Cold district spec (-30 C) Sandy/dusty environment spec (90 A brushless alternator, tilt cylinder boots, power steering cylinder boots) Tire: Front double tires, elastic cushion Rear single tire, elastic cushion Printed in Japan 201604 IP.SIN Materials and specifications are subject to change without notice is a trademark of Komatsu Ltd. Japan Powered by TCPDF (www.tcpdf.org)