Product Highlights. Product Highlights ABOUT US. Forging the INTERNATIONAL market with SATA Tools

ifetime Wrrnty

Product Highlights Product Highlights ABOUT US SATA hnd tool progrm is one of the leding hnd tool brnds owned by Apex Tool Group. Apex Tool Group ws formed in July 0 s joint venture combining two world premier tool mnufcturers: Dnher Tool Group nd Cooper Tools. Together the two businesses will offer industril, commercil nd do-it-yourself customers n unprlleled selection of over 30 leding brnds mongst mny others, including,,,,,. Hedqurters t Sprks (North of Bltimore), Mrylnd USA, Apex Tool Group opertes in more thn 30 countries round the world, employees totled to 7,00 with nnul revenues t pproximtely USD.5billion. More detils cn be found t this website, www.pextoolgroup.com Rtcheting Wrench...0 Combintion-Double X X-Bem Double Box Reversible Flex Hed X ocking Flex Hed Adpter Pss-Thru Rtchet & Socket System... FPO FPO Hex Key... Extr ong Extr ong Bll Point Torx T-Hndle Tool Storge...3 Tool Storge Tool Storge - Try Set Guided by strong tem of sesoned industry executives, the new Compny is dedicted to providing its customers with outstnding products, timely delivery, nd customer service tht is second to none. Apex Tool Group is committed to product innovtion driven by listening to our customers nd continuous improvement in everything we do. Through focusing on our Our Core Vlues below, Apex Tool Group is ble to compete efficiently nd effectively on globl bsis. Socket & Drive Tool...0 Punch & Hmmer...37 Punch Bll Pein Clw Engineers Soft-Fce Soft / Hrd Hmmer Tip Customers come first. Our first priority is exceeding customer expecttions for qulity, delivery, vlue, nd innovtion. Integrity in ll we do. Integrity is the key to build strong reltionships with coworkers, customers, suppliers, sles chnnel prtners, nd our communities. Continuous improvement in every spect of our business. Implement nd sustin sfe, len processes to drive out wste nd improve productivity. Innovtion for growth. Cretive ides implemented with speed keep us hed. Best tlent one tem. Our employees re high performing, entrepreneuril individuls who know how to win s tem. We im to continully exceed industry growth rtes through gining shre, ggressive new product development, interntionl expnsion, e-commerce inititives nd cquisition, bringing the hnd tools industry to new level. Forging the INTERNATIONA mrket with SATA Tools SATA Tools re mnufctured by one of the lrgest mechnic hnd tools mnufcturers in the world, Apex Tool Group which is poised to be key plyer in the Interntionl mrket. Widely used by professionls, SATA Tools re designed to cter for vrious industries usge from utomotive repir workshop to plnt mintennce nd repir etc. SATA Tools offer wide rnge of items for your selection from individul open stock to comprehensive dvnced set items. SATA Tools re your IDEA choice! SATA Tools meet or exceed ANSI stndrds nd DIN stndrds with ech piece offering exceptionl vlue to you, t very ffordble price point. SATA Tool mnufcturing fcilities re ISO 900 certified nd Apex Tool Group provides IFETIME WARRANTY to SATA Tools. Impct Socket...5 Wrench... X X-Bem Combintion Offset Box End Deep Offset Double Box End Combintion Double Open End / Box End Rtcheting Adjustble Wrench / Adjustble Wrench Double Socket Flex Hed / Flex Socket Flre Nut Stubby Pipe Wrench Torque Wrench Pliers, Crimping Tool, Snips, Cutter...5 Double-X ong Nose Digonl inesmn Groove Joint Slip Joint Snp Ring Crimping Tool Cutter Screwdriver & Nut Driver...3 Slotted Phillips Torx Nut Driver Insulted Auto Specilty Tool...3 Other Accessories...5 Disply Unit...55 Disply Shelf Socket Dispenser Product Number Index...5 Product Description Index... 3

Rtcheting Wrench Double Rtcheting Wrench - Combintion The SATA rtcheting wrench hs the benefits of rtchet nd more. The strong fine ger rtcheting box end needs s little s 5 of sweep to move fstener, nd stndrd fixed box end needs minimum of 30 or times the re. The ultr smll hed shnk design llows it into the tightest plces, where rtchet nd socket will not fit. The rtcheting box end comes with Surfce Drive configurtion tht nerly elimintes fstener rounding. With the specil ccessory dpters, it becomes fine ger rtchet tht does not require specil sockets. All SATA rtcheting wrench products re designed nd mnufctured to the highest stndrds, with over 0 million units been Professionlly Tested ll over the world. COMBINATION DOUBE RATCHETING DOUBE BOX S.A.E. Metric Productivity The ptented broched opening nd pin mechnism glide round fstener griping it securely in four plces Strength Surfce Drive reduces fstener rounding All SATA rtcheting wrenches re only vilble in mirror finished. REVERSIBE FEX HEAD Rtcheting function t both Box End nd Open End Productivity Rtcheting box end needs s little s 5º to move fstener VS. 30º for stndrd box end wrenches X OCKING FEX HEAD X X-BEAM PRODUCTIVITY 5 rtcheting rc VS. 30 on stndrd combintion wrenches. ACCESS Sleek hed design enbles ccess to tight spots where rtchet will not fit. STRENGTH Surfce Drive provides stronger grip on fsteners. 5

Rtcheting Wrench - X X-Bem Rtcheting Wrench - Reversible Access Up to 5% longer to ccess those hrd to rech fsteners Productivity Rtcheting box end needs s little s 5º to move fstener VS. 30º for stndrd box end wrenches Productivity Compct reversing lever (no need to remove from fstener to chnge direction) Stronger Surfce Drive Plus - Provides stronger grip on fsteners - Reduces fstener rounding Strength Improved box end strength Surfce Drive reduces fstener rounding Improved comfort Up to 0% increse in surfce contct re (vs. stndrd hndle wrench) to reduce hnd ftigue Access 5º offset provides dditionl knuckle clernce Strength Surfce Drive reduces fstener rounding ACCESS The wider, super-strong crossbem increses contct re with your hnd by 0% over trditionl wrenches. DESIGN Forges t 90-degree ngle from the other end, nd the tpered hndle is thicker on both sides thn stndrd wrench. STRENGTH Surfce Drive Plus provides stronger grip on fsteners. PRODUCTIVITY Reversing lever llows you to switch motion from left to right without removing the wrench. DESIGN 5 offset llows for sfe opertion bove the work surfce, providing dditionl knuckle clernce. ACCESS Sleek hed design enbles ccess to tight spots where rtchet will not fit. 7

Rtcheting Wrench - Flex Hed Rtcheting Wrench - X ocking Flex Hed Strength Surfce Drive reduces fstener rounding Productivity Rtcheting box end needs s little s 5º to move fstener VS. 30º for stndrd box end wrenches Access Flex Hed tilts up to º t ny intervl rtchet will not fit Access 3 locking positions with flexible hed Productivity One finger operted lever with options of locking or not locking positions Productivity Serrted bem llows you to feel which wy to pull Access 5% longer thn Flex Hed Rtcheting Wrench to ccess hrd to rech fsteners Productivity Rtcheting box end needs s little s 5º to move fstener VS. 30º for stndrd box end wrenches Stronger Surfce Drive Plus - Provides stronger grip on fsteners - Reduces fstener rounding PRODUCTIVITY Serrted wrench bem llows you to feel which direction to pull. ACCESS Flex Hed tilts up to º t ny intervl. STRENGTH Surfce Drive provides stronger grip on fsteners. PRODUCTIVITY One finger operted lever with options of "locking" or "not locking" positions ACCESS Flexible hed hs 3 locking positions nd is up to 5% longer. STRENGTH Surfce Drive Plus provides stronger grip on fsteners. 9

Double Rtcheting Wrench - Set Double Rtcheting Wrench - Set 5PC. COMBINATION SET (METRIC) 7PC. COMBINATION SET (S.A.E.) PC. COMBINATION SET (METRIC) PC. COMBINATION SET (METRIC) 0907.0 009.5 0007A 3. 09079 5 7.0,,, 3, mm 5/, 3/, 7/, /, 9/, 5/, 3/",,, 3,, 5, 7, 9mm,,,, 3,, 7, 9mm 7PC. COMBINATION SET (METRIC) 7PC. COMBINATION SET (METRIC) PC. COMBINATION SET (METRIC) 090.5 090 5.0 090 9.,,, 3,, 5, mm,,,, 7, 9, mm, 9,,,, 3,, 5,, 7,, 9mm

Rtcheting Wrench - Set Rtcheting Wrench - Set PC. X X-BEAM SET (METRIC) PC. X X-BEAM SET (METRIC) PC. REVERSIBE SET (METRIC) 5PC. FEX HEAD SET (METRIC) 005 7. 00 9.3 0900 9.3 090.,,, 3,, 5, 7, 9mm,,, 3,, 5,, 7,, 9mm,, 3,, 7, 9mm,,, 3, mm PC. DOUBE BOX SET (METRIC) 5PC. REVERSIBE SET (METRIC) 7PC. X OCKING FEX HEAD SET (METRIC) 3PC. SOCKET ADAPTER SET (METRIC) 0905.3 0903. 0903. 090 0.0 x9, x, x3, x5, x, 7x9mm,,, 3, mm,, 3,, 5, 7, 9mm /"Dr. x mm 3/"Dr. x 3mm /"Dr. x 9mm 3

Double Rtcheting Wrench - Open Stock Rtcheting Wrench - Open Stock 5 A A X X-BEAM (S.A.E.) X X-BEAM (METRIC) 3 3 33 3 35 3 37 3 30 30 303 30 305 30 307 30 309 3 3 3 5/" 3/" 7/" /" 9/" 5/" /" 3/" mm 9mm mm mm mm 3mm mm 5mm mm 7mm mm 9mm (mm) 95 0 35 0 75 305 (mm) 5 95 07 0 35 0 75 90 305.5 9..7.3 30.5 3.5 3.0.5 7. 9..7 3.0.3.7 30.5 3.5 3.5 3.0 9 9 9 7 7 3 3 3 9 9 9 9 9 7 7 7 3 3 3 3.9 7. 9. 9..7 7.7 9.5..9.0 7. 9.. 9..7 3. 7.7 9.5.3. DOUBE BOX (S.A.E.) DOUBE BOX (METRIC) 3 0 00 0 03 0 05 0 5/x3/" 7/x/" 9/x5/" /x3/" x9mm xmm xmm x3mm x5mm xmm 7x9mm (mm) 90 30 (mm) 30 70 90 30 B(mm).5 3.0. 3.5 B(mm) 7.0 9.0.5 3.0.7 3.5 3.5.0 0. 5.9 3.5.0.0 9.0.7 5.9.7 30.5 3 3 3 3 9 9 3 3 3 3 3.7 3.7 5.7 7.3 5.9.0 3.. 5.7.3 7.3 B A ASME B7.0-0 (B7.) ASME B7.0-0 (B7.) COMBINATION (S.A.E.) COMBINATION (METRIC) 3 3 33 3 35 3 37 3 39 35 35 35 33 3 35 30 30 303 30 305 30 307 30 309 3 3 3 33 3 35 3 37 3 39 37 3 39 5/" 3/" 7/" /" 9/" 5/" /" 3/" 3/" 7/" 5/" " -/" -/" -/" 5.5mm mm 7mm mm 9mm mm mm mm 3mm mm 5mm mm 7mm mm 9mm mm mm mm 5mm 7mm 30mm 3mm (mm) 59 5 7 90 0 5 9 333 333 333 359 0 5 (mm) 5 5 33 9 59 5 7 7 90 99 0 5 3 9 9 333 333 359 0 5.0 9.0 0. 3. 5.9.7 30.5 3.0 39.0 5.5 5.5 5.5 9.0.0.0.0.0 7.5 9.0 0..7 3. 5.9 7..7 30.5 3,5 3.0 39.0 39,0 5.5 5.5 9.0 9 9 3 3 3 3 3 3 9 9 9 9 9 9 3 3 3 3 3 3 3 3 3 5.5 7. 3.3.0. 5.9.9. 9. 9. 9. 9.3..5. 5.5 5.5 5.5 5.5.0 7. 3.3 3.7.0. 5. 5.9.9 7.7. 9. 9. 9. 9.3..7. ASME B7.0-0 (B7.) ASME B7.0-0 (B7.) * * * * These sizes re with stndrd (non-rtcheting) open end. * * *

Rtcheting Wrench - Open Stock Rtcheting Wrench - Open Stock 7 REVERSIBE (S.A.E.) FEX HEAD (S.A.E.) REVERSIBE (METRIC) FEX HEAD (METRIC) 7 7 73 7 75 7 77 7 79 0 3 7 7 73 7 75 7 77 7 79 0 0 0 03 0 05 0 07 0 09 3 5 0 0 03 0 05 0 07 0 09 3 5 5/" /3" 3/" 7/" /" 9/" 5/" /" 3/" 3/" 7/" 5/" " 5/" 3/" 7/" /" 9/" 5/" /" 3/" 3/" 7/" 5/" " mm 9mm mm mm mm 3mm mm 5mm mm 7mm mm 9mm mm mm mm 5mm mm 9mm mm mm mm 3mm mm 5mm mm 7mm mm 9mm mm mm mm 5mm (mm) 9 59 5 7 90 0 5 9 9 333 333 (mm) 59 5 7 90 0 5 9 333 333 333 (mm) 9 59 5 7 7 90 99 0 5 3 9 9 333 333 (mm) 9 59 5 7 7 90 99 0 5 3 9 9 333 333.9 7.5 9....3 30. 3. 3.0 39.0 39.0 5.5 5.5.0 9.0 0..7 5.9.7 30.5 3.0 39.0 5.5 5.5 5.5.9 7.5 9.. 3.0..3. 30. 3. 33. 3.0 39.0 39.0 5.5 5.5 7.0 7. 9.0 0..7 3. 5.9 7..7 30.5 3.5 3.0 39.0 39.0 5.5 5.5 3 3 3 3 3 3 0 0 0 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 0 0 0 0 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3..3. 3.3.0.7 9..9. 7.9 7.9...5 3..0 5.. 7.3.5..5 0.7 5....3. 3.3 3..0.7 5. 9..9.0. 7.9 7.9...5 3. 3. 3.9..7 5..9 7.. 9.3..5 0.7 5.. A X OCKING FEX HEAD (S.A.E.) X OCKNG FEX HEAD (METRIC) 90 90 903 90 905 90 907 90 909 9 9 9 93 0 0 03 0 05 0 07 0 09 3 5 7 5/" /3" 3/" 7/" /" 9/" 5/" /" 3/" 3/" 7/" 5/" " mm 9mm mm mm mm 3mm mm 5mm mm 7mm mm 9mm 0mm mm mm mm 5mm (mm) 59 7 3 07 9 5 0 3 335 35 37 (mm) 59 7 3 95 07 9 3 5 7 0 97 3 335 35 37.0 7.5 9.0 0. 3. 5.9.7 30.5 3.5 39.0 39.0 5.5 5.5.0 7.5 9.0 0..7 3. 5.9 7..7 30.5 3.5 3.0 39.0 39.0 39.0 5.5 5.5 7 7 7 7 7 7 3 3 3 7 7 7 7 7 7 7 7 3 3 3 3. 5.3.7 7.5.. 9.0.0.5 3.7 3.7 9.0 9.. 5.3.7 7.5 9... 3. 9.0.0.0.5 3. 3.7 3.7 9.0 9. A B SOCKET ADAPTER W/ QUICK REEASE (METRIC) 5 55 5 /"Dr. x mm 3/"Dr. x 3mm /"Dr. x 9mm (mm) 0.3.3 9.3 B(mm) 9.9.9.9.0. 3.5 0 0 0 3..5.0 A ASME B7.0-0 (B7.) ASME B7.0-0 (B7.) ASME B7.0-0 (B7.) ASME B7.0-0 (B7.) ASME B7.0-0 (B7.) ASME B7.0-0 (B7.)

Pss-Thru Rtchet & Socket System Pss-Thru Rtchet & Socket System - Set Productivity 5 Rtcheting rc VS. º on conventionl rtchets Access The vortex socket hs thin wll nd rc design 5PC. /"DR. SOCKET SET (METRIC & S.A.E.) 093. PC. 3/"DR. SOCKET SET (METRIC & S.A.E.) 093. Productivity Pss-Thru rtchet & socket system elimintes the need for deep sockets 3 - Metric Vortex Sockets 3.5,,.5, 5, 5.5,, 7,, 9,,,, 3mm 9 - S.A.E. Vortex Sockets 5/3, 3/, 7/3, /, 9/3, 5/, 3/, 7/, /" - Quick-Relese Adpter - Vortex Extension Br 3" - Pss-Thru Rtchet - Metric Vortex Sockets,,, 3,, 5,, 7,, 9mm 7 - S.A.E. Vortex Sockets 3/, 7/, /, 5/, 9/, /, 3/" - 3/"Dr. x /"M Quick-Relese Adpter - 3/"Dr. x 3/"M Quick-Relese Adpter - Vortex Extension Br 3" - Pss-Thru Rtchet Access Up to % thinner thn conventionl rtchet systems Strength Up to 0% stronger by eliminting drive tng Verstility Adpter llows you to use Pss-Thru rtchet with stndrd squre drive sockets PC. /"DR. SOCKET SET (METRIC) 30PC. /" & 3/"DR. SOCKET SET (METRIC) 0933 3.0 093 7.5 9 - Metric Vortex Sockets 9, 0,,,, 7, 30, 3, 3mm - Quick-Relese Adpter - Vortex Extension Br " - Pss-Thru Rtchet 3 - /"Dr. Metric Vortex Sockets 3.5,,.5, 5, 5.5,, 7,, 9,,,, 3mm - /"Dr. Pss-Thru Rtchet - /"Dr. Vortex Extension Br 3" - /"Dr. Quick-Relese Adpter - 3/"Dr. Metric Vortex Sockets,,, 3,, 5,, 7,, 9mm - 3/"Dr. Pss-Thru Rtchet - 3/"Dr. Vortex Extension Br 3" - 3/"Dr. x /"M Quick-Relese Adpter - 3/"Dr. x 3/"M Quick-Relese Adpter PRODUCTIVITY Pss-Thru rtchet & socket system elimintes the need for deep sockets. ACCESS U p t o 5 0 % t h i n n e r t h n conventionl rtchet systems. STRENGTH U p t o 0 % s t r o n g e r b y eliminting drive tng. 9

Socket & Drive Tool Socket & Drive Tool - Set SATA tools re designed to cter for vrious industries usge from utomotive repir workshop to plnt mintennce nd repir. SATA tools offer wide rnge of items for your selection from individul open stock to comprehensive dvnced set items. SATA tools re your idel choice. 5PC. /"DR. SOCKET SET (METRIC) 0900 - pt. Metric Sockets 3.5,,.5, 5, 5.5,, 7,, 9,,,, 3, mm 5 - pt. Metric Deep Sockets,,,, 3mm - Accessories Quick-Relese Rtchet Spinner Hndle Wobble Extension Brs ", " Sliding T-Br Universl Joint.7 3PC. /"DR. SOCKET SET (METRIC) 0900 - pt. Metric Sockets 3.5,,.5, 5, 5.5,, 7,, 9,,,, 3, mm - Bit Sockets Slotted, 5.5,.5mm Phillips #, # Pozidriv #, # Torx T, T5, T0, T5, T30, T0 Hex 3,, 5,, mm - Accessories Quick-Relese Rtchet Spinner Hndle Sliding T-Br Universl Joint Wobble Extension Brs ", ".7 Ech piece of SATA tool offers exceptionl vlue to you with highest product qulity stndrd t very ffordble price point. SATA's blow mold cses re mde of high qulity P.E. mterils tht re very durble, secure, portble nd sturdy. Compred with the trditionl metlcsing, SATA's blow mold cse is lighter nd is much sfer since there re no shrp edges nd is rustproof. 5PC. /"DR. SOCKET SET (S.A.E.) 0909 - pt. S.A.E. Sockets 5/3, 3/, 7/3, /, 9/3, 5/, /3, 3/, 7/, /" - pt. S.A.E. Deep Sockets 5/3, 3/, 7/3, /, 9/3, 5/, /3, 3/, 7/, /" 5 - Accessories Quick-Relese Rtchet Spinner Hndle Wobble Extension Brs ", " Universl Joint 9.0 5PC. /"DR. SOCKET SET (METRIC) 090 - pt. Metric Sockets, 5,, 7,, 9,,,, 3mm - Bits Phillips #, #, #3 Slotted 5/3, 7/3, 9/3" Hex /, 5/3, 3/" Torx T5, T0, T5 3 - Accessories Quick-Relese Rtchet Wobble Extension Br " Bit Adpter 3. 0

Socket & Drive Tool - Set Socket & Drive Tool - Set 3PC. /"DR. SOCKET SET (METRIC) 5PC. 3/"DR. TUNE UP KIT SET (METRIC & S.A.E.) PC. 3/"DR. SOCKET SET (S.A.E.) PC. 3/"DR. SOCKET SET (METRIC) 095 3. 09003 5 3.0 0905 5. 0953 5. - pt. Metric Sockets, 5,, 7,, 9,,,, 3, mm - Accessories Quick-Relese Rtchet Wobble Extension Br " - Wobble Extension Br " - ocking Extension Br " - Offset Flex Hed Rtchet Hndle - Sprk Plug Sockets, mm - pt. S.A.E. Sockets /, 5/, 3/, 7/, /, 9/, 5/, /, 3/, 3/, 7/" 5 - Accessories Quick-Relese Rtchet Wobble Extension Brs 3", " Flex Hndle " /"F x 3/"M 3-Wy Adpter - pt. Metric Sockets, 9,,,, 3,, 5,, 7,, 9mm - Accessories Quick-Relese Rtchet Wobble Extension Br 3" 5PC. 3/"DR. SOCKET SET (METRIC) 7PC. 3/"DR. SOCKET SET (METRIC & S.A.E.) 9PC. 3/"DR. MOTORCYCE REPAIR SET (METRIC) 0PC. /"DR. SOCKET SET (METRIC) 0900 3 3. 090 3 9. 095.5 09005 0. - pt. Metric Sockets, 7,, 9,,,, 3,, 5,, 7,, 9, 0,,, mm 9 - pt. Metric Deep Sockets,,,, 3,, 5, 7, 9mm - Sprk Plug Sockets, mm - Bit Sockets Slotted 5.5,.5, mm Phillips #, #, #3 Pozidriv #, # Torx T, T5, T0, T5, T30, T0, T5, T, T55 Hex 3,, 5,, 7,, mm 5 - Accessories Quick-Relese Rtchet Wobble Extension Brs 3", " Universl Joint /"F x 3/"M 3-Wy Adpter - pt. Metric Sockets, 7,, 9,,,, 3,, 5,, 7,, 9, 0,,, mm 9 - pt. Metric Deep Sockets,,,, 3,, 5, 7, 9mm - Sprk Plug Sockets 5/, 3/" - pt. S.A.E. Sockets /, 5/, 3/, 7/, /, 9/, 5/, /, 3/, 3/, 7/" 7 - Accessories Quick-Relese Rtchet Wobble Extension Brs 3", ", " Flex Hndle " Universl Joint /"F x 3/"M 3-Wy Adpter 7 - pt. Metric Deep Sockets, 9,,,, 3, mm - Accessories Sliding T-Br Wobble Extension Br " - pt. Metric Sockets,,, 3,, 5,, 7,, 9,, mm 3 - pt. Metric Deep Sockets 3, 7, 9mm - Sprk Plug Socket mm - Accessories Quick-Relese Rtchet Wobble Extension Br " Universl Joint 3/"F x /"M 3-Wy Adpter 3

Socket & Drive Tool - Set Socket & Drive Tool - Set PC. /"DR. SOCKET SET (METRIC & S.A.E.) 5PC. /"DR. SOCKET SET (METRIC) 0PC. /"DR. SOCKET SET (S.A.E.) PC. /"DR. SOCKET SET (S.A.E.) 0900 3 9.9 09007 3.7 0907.7 090.7 0 - pt. Metric Sockets, 9,,,, 3,, 5,, 7,, 9, 0,,, 3,, 7, 30, 3mm 7 - pt. Metric Deep Sockets,, 3,, 5, 7, 9mm - Sprk Plug Sockets, mm - pt. S.A.E. Sockets 3/, 7/, /, 9/, 5/, /, 3/, 3/, 7/, 5/, " - Accessories Quick-Relese Rtchet Flex Hndle " Wobble Extension Brs 5", " Universl Joint 3/"F x /"M 3-Wy Adpter 7 - pt. Metric Sockets,,, 3,, 5,, 7,, 9, 0,,,, 7, 30, 3mm - pt. Metric Deep Sockets,,, 3,, 5, 7, 9mm - Sprk Plug Sockets, mm 5-5/" Shnk 30 Bits Slotted,, mm Phillips #, #, #3, # Pozidriv #, #, #3, # Torx T0, T5, T30, T0, T5, T, T55 Hex, 5,,,,, mm - Accessories Quick-Relese Rtchet 5/" Shnk x /"Dr. Bit Coupler Wobble Extension Brs 5", " Universl Joint 3/"F x /"M 3-Wy Adpter - pt. S.A.E. Sockets 5/, 3/, 7/, /, 9/, 5/, /, 3/" 7 - pt. S.A.E. Sockets 3/, 7/, 5/,, -/, -/, -/" 5 - Accessories Quick-Relese Rtchet Wobble Extension Brs 5", " Flex Hndle 5" 3/"F x /"M 3-Wy Adpter 5 - pt. S.A.E. Sockets 5/, 3/, 7/, /, 9/, 5/, /, 3/, 3/, 7/, 5/,, -/, -/, -/" 7 - Accessories Quick-Relese Rtchet Wobble Extension Brs 5", " Flex Hndle " Sliding T-Br Universl Joint Speed Hndle PC. /"DR. SOCKET SET (METRIC) 7PC. /"DR. SOCKET SET (METRIC) PC. /"DR. SOCKET SET (METRIC) PC. /"DR. SOCKET SET (METRIC) 0900 0900- (0900) 9 - pt. Metric Sockets 9,,,, 3,, 5,, 7,, 9, 0,,, 3,, 7, 30, 3mm 5 - Accessories Quick-Relese Rtchet Wobble Extension Brs 5", " Universl Joint Sliding T-Br (0900-) 9 - pt. Metric Sockets 9,,,, 3,, 5,, 7,, 9, 0,,, 3,, 7, 30, 3mm 5 - Accessories Quick-Relese Rtchet Wobble Extension Brs 5", " Universl Joint Sliding T-Br 0.0 0.0 090 3 - pt. Metric Sockets,,, 3,, 5,, 7,, 9,,, mm - Sprk Plug Socket mm 3 - Accessories Quick-Relese Rtchet Wobble Extension Br 5" Flex Hndle ". 09090 - pt. Metric Sockets,,, 3,, 5,, 7,, 9, 0,,, 3,, 5,, 7,, 30, 3mm 7 - Accessories Quick-Relese Rtchet Wobble Extension Brs 5", " Flex Hndle " Sliding T-Br Universl Joint Speed Hndle 0.5 0903 - pt. Metric Sockets,,, 3,, 5,, 7, 9,,, 7, 30, 3mm - Accessories Quick-Relese Rtchet Wobble Extension Brs 5", " Sliding T-Br.5 5

Socket & Drive Tool - Set Socket & Drive Tool - Set PC. /"DR. SOCKET SET (METRIC) PC. /"DR. SOCKET SET (METRIC) PC. /"DR. SOCKET TOO SET (METRIC) PC. /"DR. SOCKET TOO SET (METRIC) 090.5 0905.7 09. 09. - pt. Metric Sockets,,, 3,, 5,, 7, 9,,, 7, 30, 3mm - Accessories Quick-Relese Rtchet Wobble Extension Brs 5", " Sliding T-Br - pt. Metric Sockets, 3,, 5,, 7,, 9, 0,,, 3,,, 7,, 30, 3mm - Accessories Quick-Relese Rtchet Wobble Extension Brs 5", " Sliding T-Br Universl Joint Speed Hndle 9 - pt. Metric Sockets,,,, 7, 9,,, mm - A-Series Screwdrivers Slotted x0mm, xmm Phillips #x0mm, #xmm 3 - Accessories Quick-Relese Rtchet Wobble Extension Br 5" Flex Hndle 5" Combintion Wrenches,,,,, 7, 9mm ong Nose Pliers " Digonl Pliers " inesmn s Pliers 7" 9 - pt. Metric Sockets,, 3,, 7, 9,,, mm - A-Series Screwdrivers Slotted 5x75mm, xmm Phillips #x75mm, #xmm 3 - Accessories Quick-Relese Rtchet Wobble Extension Br 5" Flex Hndle 5" Combintion Wrenches,,,,, 7, 9mm ong Nose Pliers " Digonl Pliers " inesmn s Pliers 7" 3PC. /"DR. SOCKET SET (METRIC) PC. /"DR. SOCKET TOO SET (METRIC) 5PC. /"DR. SOCKET WRENCH SET (METRIC) 35PC. /" & 3/"DR. E-TORX SOCKET & WRENCH SET 0955 3.9 09.5 09.0 090 9.5 - pt. Metric Sockets,, 3,, 5,, 7,, 9,, mm - Accessories Quick-Relese Rtchet Wobble Extension Br 5" - pt. Metric Sockets,,, 3,, 5,, 7,, 9,, mm 3 - pt. Metric Deep Sockets 3, 7, 9mm - Sprk Plug Socket mm - A-Series Screwdrivers Slotted x3mm, 5x75mm Phillips #x3mm, #x0mm - Accessories Quick-Relese Rtchet Wobble Extension Br " Universl Joint 3/"F x /"M 3-Wy Adpter ong Nose Pliers " inesmn s Pliers " - pt. Metric Sockets,,, 3,, 5,, 7,, 9,, mm 3 - pt. Metric Deep Sockets 3, 7, 9mm - Sprk Plug Socket mm 9 - Accessories Quick-Relese Rtchet Wobble Extension Br " Universl Joint 3/"F x /"M 3-Wy Adpter Combintion Wrenches,,, 3, mm 7 - /" Shnk Tmper-Proof Torx Bits T, T5, T0, T5, T7, T30, T0-3/"Dr. E-Torx Sockets E, E5, E, E7, E, E, E, E, E, E, E, E0-3/"Dr. Torx Bit Sockets T, T5, T0, T5, T7, T30, T0, T5, T, T55, T0 5 - Accessories E-Torx Wrenches ExE, ExE, ExE, E0xE /" Shnk x 3/"Dr. Bit Coupler 7

Socket & Drive Tool - Set Socket & Drive Tool - Set PC. /"DR. BIT SOCKET SET (METRIC) PC. /" & /"DR. BIT SOCKET SET 5PC. /" & 3/"DR. SOCKET SET (METRIC & S.A.E.) 09055 5. 090 3. 0905 5 7. - Hex Bit Sockets, 7mm - 70 Hex Bit Socket mm - 0 Hex Bit Socket 7mm - Hex Bit Socket mm - Hex Bit Sockets, mm - Hex Bit Socket 5mm - Hex Bit Socket mm - 0 Triple Squre Bit Socket M - Triple Squre Bit Socket M - Triple Squre Bit Socket M - /"Dr. Bit Sockets Slotted, 5.5,.5mm Phillips #, #, #3 - /"Dr. Triple Squre Bit Sockets M5, M, M, M, M, M - /"Dr. 0 Triple Squre Bit Sockets M5, M, M, M, M, M - /"Dr. pt. Metric Sockets,.5, 5, 5.5,, 7,, 9,,,, 3mm - /"Dr. pt. S.A.E. Sockets 5/3, 3/, 7/3, /, 9/3, 5/, /3, 3/, 7/, /" - /" Shnk 5 Bits Slotted, 5.5,.5mm Phillips #, #, #3 Torx T, T5, T0, T5, T30, T0 Hex 3,, 5,, 7, mm - 3/"Dr. pt. Metric Sockets,,, 3,, 5,, 7,, 9mm - 3/"Dr. pt. S.A.E. Sockets 3/, 7/, /, 9/, 5/, /, 3/, 3/" - 3/"Dr. Sprk Plug Socket mm - Accessories 3/"Dr. Quick-Relese Rtchet 3/"Dr. Wobble Extension Br 3" 3/"Dr. Universl Joint /" Shnk x /"Dr. Bit Coupler 3/"F x /"M Adpter /"Dr. Spinner Hndle Not covered under ifetime Wrrnty. Not covered under ifetime Wrrnty. PC. /" & /"DR. TORX BIT SOCKET SET 0905 5 - /"Dr. Torx Bit Sockets T, T5, T0, T5, T30, T0 - /"Dr. Torx Bit Sockets T30, T0, T5, T, T55, T0 - /"Dr. 0 Torx Bit Sockets T30, T0, T5, T, T55, T0 Not covered under ifetime Wrrnty. 7. PC. /" & /"DR. HEX BIT SOCKET SET (METRIC) 09053 - /"Dr. Hex Bit Sockets 3,, 5,, 7, mm - /"Dr. Hex Bit Sockets 5,, 7,,, mm - /"Dr. 0 Hex Bit Sockets 5,, 7,,, mm Not covered under ifetime Wrrnty. 5 7. PC. /" & /"DR. SOCKET SET (METRIC) 0903 3 9. - /"Dr. pt. Metric Sockets 3.5,,.5, 5, 5.5,, 7,, 9,,,, 3, mm - /"Dr. pt. Metric Deep Sockets, 7,, 9,,,, 3mm 7 - /"Dr. Bit Sockets Slotted, 5.5,.5mm Phillips #, # Pozidriv #, # Torx T, T, T5, T0, T5, T30 Hex 3,, 5, mm - /"Dr. Sprk Plug Sockets, mm - /"Dr. pt. Metric Sockets, 3, 5,, 7,, 9, 0,,,, 7, 30, 3mm - /"Dr. pt. Metric Deep Sockets, 5, 7, 9mm 5-5/" Shnk 30 Bits Slotted,, mm Phillips #3, # Pozidriv #3, # Torx T0, T5, T, T55 Hex,,, mm - Accessories /", /"Dr. Quick-Relese Rtchets /"Dr. Sliding T-Br /"Dr. Wobble Extension Brs ", " /"Dr. Wobble Extension Brs 5", " /", /"Dr. Universl Joints 3/"F x /"M 3-Wy Adpter /"Dr. Spinner Hndle 5/" Shnk x /"Dr. Bit Coupler 9

Socket & Drive Tool - Set Socket & Drive Tool - Set 7PC. /" & /"DR. SOCKET WRENCH SET (METRIC) 0959 3 9. 7 - /"Dr. pt. Metric Sockets, 9,,,, 3, mm - /"Dr. Bit Sockets Slotted, 5.5,.5mm Phillips #, # Pozidriv #, # Torx T, T, T5,T0, T5, T30, T0 Hex 3,, 5, mm - /"Dr. pt. Metric Sockets,,, 3,, 7, 9,,, 7, 30, 3mm 5-5/" Shnk 30 Bits Slotted,, mm Phillips #3, # Pozidriv #3, # Torx T0, T5, T, T55 Hex,,, mm - /"Dr. Sprk Plug Sockets, mm - Accessories /", /"Dr. Quick-Relese Rtchets /"Dr. Sliding T-Br /"Dr. Flex Shft /"Dr. Wobble Extension Brs ", " /"Dr. Wobble Extension Brs 5", " /", /"Dr. Universl Joints /"Dr. Spinner Hndle /"Dr. Sliding T-Br 5/" Shnk x /"Dr. Bit Coupler Combintion Wrenches,,,, 3,, 7, 9, mm PC. /" & 3/" & /"DR. SOCKET WRENCH SET (METRIC & S.A.E.) 095.0 - /"Dr. pt. Metric Sockets, 5,, 7,, 9,,,, 3mm - /"Dr. pt. S.A.E. Sockets 5/3, 3/, 7/3, /, 9/3, 5/, /3, 3/, 7/, /" - /"Dr. pt. Metric Deep Sockets, 5,, 7,, 9mm - 3/"Dr. pt. Metric Sockets 9,,,, 3,, 5,, 7,, 9mm 9-3/"Dr. pt. S.A.E. Sockets 3/, 7/, /, 9/, 5/, /, 3/, 3/, 7/" - 3/"Dr. pt. Metric Deep Sockets,,, 3,, 5mm - 3/"Dr. Sprk Plug Sockets, mm - 3/"DR. Bit Sockets Slotted, 5.5,.5mm Phillips #, #, #3 Pozidriv #, #, #3 Torx T0, T30, T0 Tmper-Proof T5, T, T55, T0 Hex 3,, 5,,, mm - 3/"Dr. pt. E-Torx Sockets E, E, E, E, E, E, E, E0 - /"Dr. pt. Metric Impct Sockets 7, 9,, 3mm 7 - /"Dr. pt. Metric Sockets 0,,,, 7, 30, 3mm - /"Dr. pt. S.A.E. Sockets 5/,, -/, -/" - /"Dr. pt. Metric Deep Sockets,, 3,, 7, 9mm 5 - Accessories /", 3/", /"Dr. Quick-Relese Rtchets /"Dr. Bit Coupler /"Dr. Spinner Hndle /"Dr. Wobble Extension Br " 3/"Dr. ocking Extension Brs 3", " /"Dr. Wobble Extension Br 5" /"Dr. ocking Extension Br " /", 3/", /"Dr. Universl Joints /" Shnk Torx Bits (Tmper-Proof) T, T5, T0, T5, T7, T30, T0 Hex Key Metric Set (pcs) Combintion Wrenches, 9,,,, 3,, 5,, 7,, 9mm Double Box Rtcheting Wrenches x, x3, 7x9mm PC. /" & 3/" & /"DR. SOCKET WRENCH SET (METRIC & S.A.E.) 5PC. 3/"DR. SOCKET SET (METRIC) -SHAPED TIRE WRENCH 090.0 0905 5. 0953 0 3.5 - /"Dr. pt. Metric Sockets, 5,, 7,, 9,,,, 3mm - /"Dr. pt. S.A.E. Sockets 5/3, 3/, 7/3, /, 9/3, 5/, /3, 3/, 7/, /" - /"Dr. pt. Metric Deep Sockets, 9,, mm 7 - /" Shnk 5 Tmper-Proof Torx Bits T, T5, T0, T5, T7, T30, T0-3/"Dr. pt. Metric Sockets 9,,,, 3,, 5,, 7,, 9mm 9-3/"Dr. pt. S.A.E. Sockets 3/, 7/, /, 9/, 5/, /, 3/, 3/, 7/" - 3/"Dr. pt. Metric Deep Sockets 3,, 5, 7mm - 3/"Dr. Sprk Plug Sockets, mm 7-3/"Dr. Bit Sockets Slotted 5.5,.5mm Phillips #, # Pozidriv #, # Torx T0, T30, T0 Tmper-Proof Torx T5, T, T55, T0 Hex 3,, 5, mm - 3/"Dr. E-Torx Sockets E, E, E, E, E, E, E, E0 7 - /"Dr. pt. Metric Sockets 0,,,, 7, 30, 3mm - /"Dr. pt. S.A.E. Sockets 5/,, -/, -/" - /"Dr. pt. Metric Impct Sockets 7, 9,, 3mm 3 - Accessories /", 3/", /"Dr. Quick-Relese Rtchets /"Dr. Spinner Hndle /"Dr. Wobble Extension Br " 3/"Dr. Wobble Extension Brs 3", " /"Dr. Wobble Extension Brs 5", " /", 3/", /"Dr. Universl Joints /" Shnk x /"Dr. Bit Coupler Combintion Wrenches, 9,,,, 3,, 7,, 9mm - pt. Metric Sockets 30, 3, 3, 3, 3,,,, 55, 0mm 5 - Accessories Quick-Relese Rtchet Sliding T-Br Extension Brs ", " Universl Joint 390 - /"Dr. Offset Hndle 35mm 39 - /"Dr. Dul Hed Socket 7x9mm 39 - /"Dr. Dul Hed Socket x3mm 30 3

Socket & Drive Tool - Open Stock Socket & Drive Tool - Open Stock /"DR. PT. SOCKET (S.A.E.) /"DR. PT. DEEP SOCKET (METRIC) 5/3" 3/" 3 7/3" /" 5 9/3" 5/" 7 /3" 3/" 9 7/" /" (mm).5.5.5.5.5.5.5.5.5.5 D(mm) D(mm)..9. 7...5. 9.5..7...5.5 3. 3. 5.7 5.7 7.3 7.3 3 3 3 3 3 3 7. 7. 7.3 7.3 7.3 7.3 5. 3.0 3. 3 5 7 9 mm 5mm mm 7mm mm 9mm mm mm mm 3mm (mm) 9 9 9 9 9 9 9 9 9 9 D(mm) D(mm).9.7.9.0.9 9..9..9.9 3. 3... 5.9 5.9.9.9 7.9 7.9 39 39 39 39 39 7.3.9..5.5 3..3 5. 5. ANSI B7. D D D ANSI B7.5M DIN 3 These sockets should never be used on power drivers, These sockets should never be used on power drivers, D D D /"DR. PT. DEEP SOCKET (S.A.E.) /"DR. QUICK-REEASE RATCHET (5S-0T) /"DR. QUICK-REEASE RATCHET (ROUND HEAD) 3 5 7 9 3/" 7/3" /" 9/3" 5/" /3" 3/" 7/" /" (mm) 9 9 9 9 9 9 9 9 9 D(mm) D(mm).9 7.9.9.9.9 9.9.9.0.9.9 3. 3... 5.9 5.9 7.9 7.9 39 39 39 39 39 7.9..5.0. 3.. 5.7 5.3 905 (mm) 3. ANSI B7.M DIN 3 90 (mm). ANSI B7.M DIN 3 ANSI B7. These sockets should never be used on power drivers, D D D SATA's rtchets feture convenient single hnd direction chnge switch SATA's rtchets hve quick-relese cpbility to esily eject n engged socket even under slippery conditions SATA's rtchets hve quick-relese cpbility to esily eject n engged socket even under slippery conditions /"DR. PT. SOCKET (METRIC) /"DR. QUICK-REEASE RATCHET (5S-0T) /"DR. HEAVY DUTY OFFSET QUICK-REEASE RATCHET 30 30 303 30 305 30 307 30 309 3 3 3 33 3 3.5mm mm.5mm 5mm 5.5mm mm 7mm mm 9mm mm mm mm 3mm mm (mm).5.5.5.5.5.5.5.5.5.5.5.5.5.5 D(mm) D(mm)....7. 7.3..0... 9...7.. 3. 3..3.3 5. 5... 7.9 7.9 9.5 9.5 3 3 3 3 3 3 3 3 7. 7. 7. 7. 7. 7.3 7.3 7.3.. 3. 3. 3..0 D D D These sockets should never be used on power drivers, 90 (mm) 3. ANSI B7.M DIN 3 SATA's rtchets feture convenient single hnd direction chnge switch SATA's rtchets hve quick-relese cpbility to esily eject n engged socket even under slippery conditions 970 (mm) 53 SATA's rtchets feture convenient single hnd direction chnge switch SATA's rtchets hve quick-relese cpbility to esily eject n engged socket even under slippery conditions. ANSI B7.M DIN 3 3 ANSI B7.5M DIN 3 33

Socket & Drive Tool - Open Stock Socket & Drive Tool - Open Stock MAGNETIC PICK-UP TOO /"DR. FEX HANDE /"DR. X /"SHANK BIT COUPER /"DR. FEX SHAFT (mm) (mm) Shnk Driver (mm) 9 30 3 3.0 909 3 5. 9 /" /" 3 9.7 9 3 3. ANSI B7.M DIN 3 ANSI B7.M ong shft gets in tight plces Powerful mgnets re fitted into the brss sleeve on these units These sockets ccessories should never be used on power drivers, Flex shft for esy ccess /"DR. SIDING T-BAR /"DR. SPINNER HANDE /"DR. WOBBE EXTENSION BAR (mm) (mm) (mm) 9 0 3.7 9 3 ANSI B7.M DIN 3 ANSI B7.M DIN 3 903 90 " " 0.. 39 7.0. ANSI B7.M DIN 33 Unique design for dul function For wobble function Push in for stndrd extension br A These sockets ccessories should never be used on power drivers, /"DR. UNIVERSA JOINT /"DR. ADAPTER 3/"DR. PT. SOCKET (S.A.E.) (mm) F M (mm) D(mm) D(mm) 9 3.9. 93 /" 3/" 3 ANSI B7.M DIN 33 9.7 ANSI B7.M DIN 33 3 5 7 9 /" 5/" 3/" 7/" /" 9/" 5/" /" 3/" 3/" 7/" 5 5 5 5 5 5 5 5 5 7. 7. 7. 7. 7. 9.7. 3.9 5.9 7.9 9.7.0.7 3..0 7.9 9.7. 3.9 5.9 7.9 9.7 9 9 9 9 9 7 7 5.5 5.5 5.7.3. 3..5.7 5.. 5. ANSI B7. D D D These sockets ccessories should never be used on power drivers, These sockets ccessories should never be used on power drivers, These sockets should never be used on power drivers, 3 35

Socket & Drive Tool - Open Stock Socket & Drive Tool - Open Stock 3/"DR. PT. DEEP SOCKET (S.A.E.) 3/"DR. PT. DEEP SOCKET (METRIC) (mm) D(mm) D(mm) (mm) D(mm) D(mm) 3 5 7 9 3/" 7/" /" 9/" 5/" /" 3/" 3/" 7/" 3.5 3.5 3.5 3.5 3.5 3.5 3.5 3.5 3.5.. 7. 9..0 3. 5. 7. 9. 3..0 7. 9..0 3. 5. 7. 9. 9 9 7 7 7 7 7.9.3..5 7. 9.7. 9..3 ANSI B7. 3 5 7 9 3 5 mm 9mm mm mm mm 3mm mm 5mm mm 7mm mm 9mm 0mm mm mm 3.5 3.5 3.5 3.5 3.5 3.5 3.5 3.5 3.5 3.5 3.5 3.5 3.5 3.5 3.5......3 9.5 0..0 3. 3. 5.5 7. 7. 9.5.0.9....3 9.5 0..0 3. 3. 5.5 7. 7. 9.5 9 9 9 9 9 7 7 7 7 7 7 7.9.9.9.3.5..5 7. 7.3 9.7 9.9. 9. 9..3 ANSI B7.5M DIN 3 D D D D D D These sockets should never be used on power drivers, These sockets should never be used on power drives, 3/"DR. PT. SOCKET (METRIC) 3/" DR. E-TORX SOCKET (mm) D(mm) D(mm) (mm) D(mm) D(mm) 30 30 303 30 305 30 307 30 309 3 3 3 33 3 35 3 37 3 mm 7mm mm 9mm mm mm mm 3mm mm 5mm mm 7mm mm 9mm 0mm mm mm mm 5 5 5 5 5 5 5 5 5 5 5 5 5 3.5 3.5 7.0 7.0 7.0 7.0 7.0 7.0 7.0.3 9.5 0..0 3.3 3. 5.5 7.0.0.0 9.3..0.9.5 5. 7.0.3 9.5 0..0 3.3.3 5.5 7.0 7.9 9.5 3.9 9 9 9 9 9 9 9 7 7 7 5.5 5.7 5..0.0.0.3 3. 3..0..3..5.0...9 ANSI B7.5M DIN 3 D D D 70 70 703 70 705 70 707 70 709 7 7 7 E E5 E E7 E E E E E E E E0.5.5.5 30.5 7.0 7.0 7.0 7.0 7.0 7.0 7.0 7.0.3.3 9.5.0 7.0.0.0 9.0.5 3.0.0.3.3 9.5.0 9 9 9 9 9 9 9 9 3.9 3.9 3.9 3.9. 5. 5..5.7. D D D These sockets should never be used on power drivers, These sockets should never be used on power drivers, 3 37

Socket & Drive Tool - Open Stock Socket & Drive Tool - Open Stock 3/"DR. QUICK-REEASE RATCHET (5S-0T) 3/"DR. QUICK-REEASE RATCHET (ROUND HEAD) 3/"DR. OCKING EXTENSION BAR 3/"DR. FEX HANDE (mm) (mm) (mm) (mm) 97 00 7.7 90 00 ANSI B7.M DIN 3.3 ANSI B7.M DIN 3 90 907 90 3" " " 75 9. 9. 9. 7 3 3.7. 9.3 ANSI B7.M DIN 33 909 5 3. ANSI B7.M DIN 3 No more dropped sockets, extensions or universl joint A SATA's rtchets feture convenient single hnd direction chnge switch SATA's rtchets hve quick-relese cpbility to esily eject n engged socket even under slippery conditions SATA's rtchets hve quick-relese cpbility to esily eject n engged socket even under slippery conditions These sockets ccessories should never be used on power drivers, These sockets ccessories should never be used on power drivers, 3/"DR. QUICK-REEASE RATCHET (5S-0T) 3/"DR. QUICK-REEASE STUBBY RATCHET 3/"DR. SIDING T-BAR 3/"DR. OFFSET FEXIBE RATCHET (mm) (mm) (mm) (mm) 97 00 7.3 90 5 3.3 9 5 3. 9 75.7 ANSI B7.M DIN 3 ANSI B7.M DIN 3 ANSI B7.M DIN 3 ANSI B7.M DIN 3 SATA's rtchets feture convenient single hnd direction chnge switch SATA's rtchets hve quick-relese cpbility to esily eject n engged socket even under slippery conditions SATA's rtchets feture convenient single hnd direction chnge switch SATA's rtchets hve quick-relese cpbility to esily eject n engged socket even under slippery conditions These sockets ccessories should never be used on power drivers, These sockets ccessories should never be used on power drivers, 3/"DR. HEAVY DUTY OFFSET QUICK-REEASE RATCHET 3/"DR. WOBBE EXTENSION BAR 3/"DR. UNIVERSA JOINT 3/"DR. ADAPTER (mm) (mm) (mm) F M 970 7.3 ANSI B7.M DIN 3 903 90 905 3" " " 75 9. 9. 9. 7 3 3.. 9.5 ANSI B7.M DIN 33 9 55. 7.7 ANSI B7.M DIN 33 93 9 3/" 3/" /" /" 9.. ANSI B7.M DIN 33 SATA's rtchets feture convenient single hnd direction chnge switch SATA's rtchets hve quick-relese cpbility to esily eject n engged socket even under slippery conditions For wobble function Push in for stndrd extension br These sockets ccessories should never be used on power drivers, A These sockets ccessories should never be used on power drivers, These sockets ccessories should never be used on power drivers, 3 39

Socket & Drive Tool - Open Stock Socket & Drive Tool - Open Stock 3/"DR. SPARK PUG SOCKET 3/"DR. X /"SHANK BIT COUPER /"DR. PT. DEEP SOCKET (S.A.E.) 95 9 99 90 mm mm 5/" 3/" 7 7 7 7.3.0.3.0 ANSI B7.3M These sockets ccessories should never be used on power drivers, Shnk Driver 97 /" 3/" 9 9. ANSI B7.M DIN 33 These sockets ccessories should never be used on power drivers, 30 3/" 30 7/" 303 /" 30 9/" 305 5/" 30 /" 307 3/" 30 3/" 309 7/" 3 5/" 3 " 3 -/" 33 -/" 3 -/" (mm) 77 77 77 77 77 77 77 77 77 77 77 77 77 77 D(mm) D(mm).0.5.0 7.0.0..0 0..0.0 3. 3. 5. 5. 7. 7. 9. 9. 3. 3. 33. 33. 35. 35. 37. 37... 7 7 7 7 7 7 7 7.5...9.9.5...3..7 7.0..3 ANSI B7. 3/"DR. FEX SHAFT 3/"DR. 3-WAY ADAPTER (mm) F M 9 00 3 5. 930 3/" /" 7. D D D ANSI B7.M DIN 33 These sockets should never be used on power drivers, /"DR. PT. SOCKET (METRIC) (mm) D(mm) D(mm) Flex shft for esy ccess /"DR. PT. SOCKET (S.A.E.) 3 3 33 3 35 3 37 3 39 3 3 3 33 3 35 5/" 3/" 7/" /" 9/" 5/" /" 3/" 3/" 7/" 5/" " -/" -/" -/" (mm) 37. 37. 37. 37. 37. 37. 37. 37. 37. 37. 37. 0 0 D(mm) D(mm)..5..5. 7.5... 0..... 5.9 5.9 7.9 7.9 9.9 9.9 3.9 3.9 33.9 33.9 35.9 35.9 37.9 37.9.9.9.9.9 5. 5. 5. 5.7 7 5. 7. 5. 5.9.5 7.7.7 9.9.0 ANSI B7. These sockets ccessories should never be used on power drivers, D D D These sockets should never be used on power drivers, 339 330 330 330 3303 330 3305 330 3307 330 3309 33 33 33 333 33 335 33 337 33 33 mm 9mm mm mm mm 3mm mm 5mm mm 7mm mm 9mm 0mm mm mm 3mm mm 7mm 30mm 3mm 3mm 37. 37. 37. 37. 37. 37. 37. 37. 37. 37. 37. 37. 37. 37. 0 0 0 3 3 3 3......... 3.9.9.0.0.0.0.0.0.0 3.0 33.0 3 3.3.3 5.3.5 7. 9.0 0.3.. 3.9.9 5.9 7. 7.9 9.9 3. 3.9 35.9 39.9.9 3.9 These sockets should never be used on power drivers, 7 7 7.9.9.9.9 5. 5. 5. 5.7 5.7 5... 5. 5.9 5.9.5.5.7 5.. 7. ANSI B7.5M DIN 3 D D D 0

Socket & Drive Tool - Open Stock Socket & Drive Tool - Open Stock /"DR. PT. DEEP SOCKET (METRIC) /"DR. PT. SOCKET (METRIC) (mm) D(mm) D(mm) (mm) D(mm) D(mm) 30 30 303 30 305 30 307 30 309 3 3 3 33 3 35 3 37 mm mm mm 3mm mm 5mm mm 7mm mm 9mm 0mm mm mm mm 7mm 30mm 3mm 77 77 77 77 77 77 77 77 77 77 77 77 77 77 77 77 77.0.0.0.0.0.0.0 3.. 5. 7. 7. 9. 3. 35. 39.. 5.3.5 7. 9.0 0.3..0 3.. 5. 7. 7. 9. 3. 35. 39.. 7 7 7 7 7 7 7 7 7 7 7.5....9.9.9.5.....3. 7.0 9.5.3 ANSI B7.5M DIN 3 39 30 30 30 303 30 305 30 307 30 309 3 3 3 33 3 35 3 37 3 mm 9mm mm mm mm 3mm mm 5mm mm 7mm mm 9mm 0mm mm mm 3mm mm 7mm 30mm 3mm 37. 37. 37. 37. 37. 37. 37. 37. 37. 37. 37. 37. 37. 37. 0 0 0 3 3 3......... 3.9.9.0.0.0.0.0.0.0 3.0 33.0 3.3.3 5.3.5 7. 9.0 0.3.. 3.9.9 5.9 7. 7.9 9.9 3. 3.9 35.9 39.9.9 7 7 7.9.9.9 5. 5. 5. 5. 5. 5. 5... 5. 5.9 5.9.5.5.7 5.. D D D D D D ANSI B7.5M DIN 3 These sockets should never be used on power drivers, These sockets should never be used on power drivers, /"DR. PT. SOCKET (S.A.E.) /"DR. E-TORX SOCKET 3 5/" 3 3/" 33 7/" 3 /" 35 9/" 3 5/" 37 /" 3 3/" 39 3/" 35 7/" 35 5/" 35 " 353 -/" 35 -/" 355 -/" (mm) 37. 37. 37. 37. 37. 37. 37. 37. 37. 37. 37. 0 0 D(mm) D(mm)..5..5. 7.5... 0..... 5.9 5.9 7.9 7.9 9.9 9.9 3.9 3.9 33.9 33.9 35.9 35.9 37.9 37.9.9.9 7 7.9.9 5. 5. 5. 5.7 5.. 5. 5.9.5 7.7.7 9.9. 370 370 3703 370 3705 370 3707 370 E E E E E E0 E E (mm) 3 3 3 3 3 3 3 0 D(mm) D(mm) 3.0.0.0 7.0.0 9.0.0.0 3. 3.5 5. 5. 5. 7. 7. 7 5. 5. 5.7 5.7. 5.9.5.5 ANSI B7. D D D D D D These sockets should never be used on power drivers, These sockets should never be used on power drivers, 3

Socket & Drive Tool - Open Stock Socket & Drive Tool - Open Stock /"DR. QUICK-REEASE RATCHET (5S-0T) /"DR. QUICK-REEASE RATCHET (ROUND HEAD) /"DR. OCKING EXTENSION BAR /"DR. FEX HANDE (mm) (mm) (mm) (mm) 397. 390 ANSI B7.M DIN 3 5. ANSI B7.M DIN 3 390 3907 390 3" 5" " 75 5.7.7.7.7..9 ANSI B7.M DIN 33 3909 39 395 375 3.7 9..9 ANSI B7.M DIN 3 No more dropped sockets, extensions or universl joint A SATA's rtchets feture convenient single hnd direction chnge switch SATA's rtchets hve quick-relese cpbility to esily eject n engged socket even under slippery conditions SATA's rtchets hve quick-relese cpbility to esily eject n engged socket even under slippery conditions These sockets ccessories should never be used on power drivers, These sockets ccessories should never be used on power drivers, /"DR. QUICK-REEASE RATCHET (5S-0T) /"DR. QUICK-REEASE STUBBY RATCHET /"DR. SIDING T-BAR /"DR. UNIVERSA JOINT (mm) (mm) (mm) (mm) 397. 390. 39.7 39 70..3 ANSI B7.M DIN 3 ANSI B7.M DIN 3 ANSI B7.M DIN 3 ANSI B7.M DIN 33 SATA's rtchets feture convenient single hnd direction chnge switch SATA's rtchets hve quick-relese cpbility to esily eject n engged socket even under slippery conditions SATA's rtchets feture convenient single hnd direction chnge switch SATA's rtchets hve quick-relese cpbility to esily eject n engged socket even under slippery conditions These sockets ccessories should never be used on power drivers, These sockets ccessories should never be used on power drivers, /"DR. HEAVY DUTY OFFSET QUICK-REEASE RATCHET /"DR. WOBBE EXTENSION BAR /"DR. ADAPTER /"DR. X 5/"SHANK BIT COUPER (mm) (mm) F M Shnk Driver 3970. ANSI B7.M DIN 3 390 3905 5" " 5.7.7..3 ANSI B7.M DIN 33 393 39 /" /" 3/" 3/" 5 9. 5. ANSI B7.M DIN 33 39 5/" /" 7. ANSI B7.M DIN 33 SATA's rtchets feture convenient single hnd direction chnge switch SATA's rtchets hve quick-relese cpbility to esily eject n engged socket even under slippery conditions For wobble function Push in for stndrd extension br These sockets ccessories should never be used on power drivers, A These sockets ccessories should never be used on power drivers, These sockets ccessories should never be used on power drivers, 5

Socket & Drive Tool - Open Stock Socket & Drive Tool - Open Stock /"DR. SPARK PUG SOCKET /"DR. OFFSET HANDE 3/"DR. PT. SOCKET (S.A.E.) 395 39 397 39 mm mm 5/" 3/" 7 0.5. 7..3 ANSI B7.3M These sockets ccessories should never be used on power drivers, 399 (mm) 0.5 ANSI B7.M DIN 3 3 5 7 9 5 5 5 53 5 55 5 57 5 59 5 5 53 3/" 3/" 7/" 5/" " -/" -/" -3/" -/" -5/" -3/" -7/" -/" -9/" -5/" -/" -3/" -3/" -7/" " -/" -/" -/" (mm) 5 5 5 5 5 5 5 5 5 0 7 5 70 7 7 7 D(mm) D(mm) 9. 33.0 3. 33.0 3. 3.0 3. 3.0 37.0 3.0 3.0 3.0 0.0 3.0.0 3.0.0 3.0.0 3.0.0.0.0.0.0.0 0.0.0.0.0.0.0 70.0.0 7.0.0 7.0.0 0 0 0 0 0 0 3 3 3 3 3. 3. 3. 3. 3. 3..5 3.5..9.0 5..0 3....3 9.7.3 7.5..7 ANSI B7.5M DIN 3 These sockets should never be used on power drivers, /"DR. 3-WAY ADAPTER /"DR. SPEED HANDE 3/"DR. PT. SOCKET (METRIC) F M 3930 /" 3/" 5. ANSI B7.M DIN 33 These sockets ccessories should never be used on power drivers, 700 (inch) " 5. ANSI B7.M DIN 3 3 5 7 9 3 5 7 9 3 9mm mm mm 3mm mm 5mm mm 7mm mm 9mm 30mm 3mm 33mm 3mm 35mm 3mm 3mm mm mm mm 55mm 0mm (mm) 5 5 5 5 5 5 5 5 5 0 5 70 7 7 7 D(mm) D(mm) 9.0 33.0 3. 33.0 3. 3.0 33. 3.0 3. 3.0 3.0 3 37.0 3.0 3.0 3.0 39.0 3.0 0.0 3.0.0 3.0.0 3.0.0 3.0 7.0 3.0.0.0.0.0.0 7.0.0.0 7.0.0 0.0.0 0 0 0 0 0 0 0 0 3 3 3 3 3 3. 3. 3. 3. 3. 3. 3. 3..0.5 3.5...9.0 5..0..3.3. 3. ANSI B7.5M DIN 3 These sockets should never be used on power drivers, 7

Socket & Drive Tool - Open Stock Socket & Drive Tool - Open Stock 3/"DR. QUICK-REEASE RATCHET (TEAR DROP) 3/"DR. EXTENSION BAR 3/"DR. OFFSET HANDE /"DR. TORX BIT SOCKET 90 (mm) 5 0. ANSI B7.M DIN 3 90 903 90 " " " (mm) 0 00 00 3 3 5. 3. 9.3 ANSI B7.M DIN 33 99 (mm) 30 5. ANSI B7.M DIN 3 3 5 7 T T T5 T0 T5 T7 T30 T0 (mm) 37 37 37 37 37 37 37 37 3. 3. 3. 3. 3. 3. 3. 3. SATA's rtchets feture convenient single hnd direction chnge switch SATA's rtchets hve quick-relese cpbility to esily eject n engged socket even under slippery conditions These sockets ccessories should never be used on power drivers, 3/"DR. SIDING T-BAR 3/"DR. FEX HANDE (mm) (mm) 905 35. 90 75 9 7.9 ANSI B7.M DIN 3 ANSI B7.M DIN 3 These bit sockets should never be used on power drivers, Not covered under ifetime Wrrnty. /"DR. HEX BIT SOCKET (METRIC) /"DR. PHIIPS BIT SOCKET (mm) (mm) These sockets ccessories should never be used on power drivers, These sockets ccessories should never be used on power drivers, 3 5 3mm mm 5mm mm 7mm mm 37 37 37 37 37 37 39 39 39 39 39 39.7 9. 9. 9..3.3 30 30 303 # # #3 37 37 37 39 39 39.7 9. 9. 3/"DR. UNIVERSA JOINT 3/"DR. ADAPTER (mm) F M 907 3. 90 3/" /" 3. ANSI B7.M DIN 33 ANSI B7.M DIN 3 These sockets ccessories should never be used on power drivers, These sockets ccessories should never be used on power drivers, These bit sockets should never be used on power drivers, Not covered under ifetime Wrrnty. These bit sockets should never be used on power drivers, Not covered under ifetime Wrrnty. 9

Socket & Drive Tool - Open Stock Socket & Drive Tool - Open Stock /"DR. POZI-DRIVE BIT SOCKET /"DR. SOTTED BIT SOCKET 3/"DR. PHIIPS BIT SOCKET 3/"DR. POZI-DRIVE BIT SOCKET (mm) (mm) (mm) (mm) 3 # # #3 37 37 37 39 39 39.7 9. 9. 3.0mm 5.5mm.5mm 37 37 37 39 39 39 9. 9. 9. 30 30 303 # # #3 9 9 9 9. 9. 9.5 0 0 03 # # #3 9 9 9 9. 9.5 9. These bit sockets should never be used on power drivers, Not covered under ifetime Wrrnty. These bit sockets should never be used on power drivers, Not covered under ifetime Wrrnty. These bit sockets should never be used on power drivers, Not covered under ifetime Wrrnty. These bit sockets should never be used on power drivers, Not covered under ifetime Wrrnty. 3/"DR. TORX BIT SOCKET 3/"DR. HEX BIT SOCKET (METRIC) 3/"DR. SOTTED BIT SOCKET 3/"DR. TORX BIT SOCKET (TAMPER-PROOF) (mm) (mm) (mm) (mm) 3 5 7 9 T T5 T0 T5 T7 T30 T0 T5 T T55 T0 9 9 9 9 9 9 9 9 9 9 9 9..9 9. 9. 9. 9. 9.5.0...7 0 0 03 0 05 0 07 3mm mm 5mm mm 7mm mm mm 9 9 9 9 9 9 9.9 9. 9. 9. 9..9.0 3 5.5mm.5mm.0mm 9 9 9 9. 9. 9. 0 0 03 0 T5 T T55 T0 9 9 9 9 9. 9. 9.. These bit sockets should never be used on power drivers, Not covered under ifetime Wrrnty. These bit sockets should never be used on power drivers, Not covered under ifetime Wrrnty. These bit sockets should never be used on power drivers, Not covered under ifetime Wrrnty. These bit sockets should never be used on power drivers, Not covered under ifetime Wrrnty. 5

Socket & Drive Tool - Open Stock Socket & Drive Tool - Open Stock /"DR. TORX BIT SOCKET /"DR. HEX BIT SOCKET (METRIC) /"DR. 0 TORX BIT SOCKET /"DR. 0 HEX BIT SOCKET (METRIC) (mm) (mm) (mm) (mm) 3 5 7 9 T0 T5 T7 T30 T0 T5 T T55 T0..3. 5.3.. 7.. 0 0 03 0 05 0 07 0 09 mm 5mm mm 7mm mm mm mm mm 7mm.3. 5.3.. 7.3.9 3. 5. 5 5 53 5 55 5 57 5 59 T0 T5 T7 T30 T0 T5 T T55 T0 0 0 0 0 0 0 0 0 0 7 7 7 7 7 7 7 7 7 7.3 7. 7.5 7.7 7. 7.9.0 9.0 3.3 3 5 7 9 mm 5mm mm 7mm mm mm mm mm 7mm 0 0 0 0 0 0 0 0 0 7 7 7 7 7 7 7 7 7 7. 7. 7.5 7..0 9.5 3..0.7 These bit sockets should never be used on power drivers, Not covered under ifetime Wrrnty. These bit sockets should never be used on power drivers, Not covered under ifetime Wrrnty. These bit sockets should never be used on power drivers, Not covered under ifetime Wrrnty. These bit sockets should never be used on power drivers, Not covered under ifetime Wrrnty. /"DR. HEX BIT SOCKET (S.A.E.) /"DR. TRIPE SQUARE BIT SOCKET /"DR. 0 TRIPE SQUARE BIT SOCKET (mm) (mm) (mm) 0 0 03 0 05 0 07 /" 5/" 3/" 7/" /" 9/" 5/".. 7.3 0..9 3. 5. 0 0 03 0 05 0 07 M5 M M M M M M.3.5.9... 3. 3 5 7 M5 M M M M M M 0 0 0 0 0 0 0 7 7 7 7 7 7 7 7. 7. 7.7. 3.3 3.. These bit sockets should never be used on power drivers, Not covered under ifetime Wrrnty. These bit sockets should never be used on power drivers, Not covered under ifetime Wrrnty. These bit sockets should never be used on power drivers, Not covered under ifetime Wrrnty. 5 53

Impct Socket Impct Socket - Set & Open Stock For use with impct drivers. PC. /"DR. IMPACT SOCKET SET (S.A.E.) PC. /"DR. IMPACT SOCKET SET (METRIC) 0900. 09009 5.7 - pt. S.A.E. Sockets 7/, /, 9/, 5/, /, 3/, 3/, 7/, 5/, " - Impct Universl Joint - Impct Extension Br 5" - pt. Metric Sockets,, 3,, 7, 9,,, 3, mm - Impct Universl Joint - Impct Extension Br 5" Mnufctured from Chrome Molybdenum mteril for incresed strength nd greter impct resistnce. Mngnese phosphte tretment for better corrosion protection. Eye protection must lwys be worn when using impct tool. /"DR. IMPACT ADAPTER 37 F /" M 3/" 0 300 5. ANSI B7. DIN 39 3/"DR. PT. IMPACT SOCKET (METRIC) 30 30 303 30 305 30 307 30 309 3 3 3 33 3 mm 7mm mm 9mm mm mm mm 3mm mm 5mm mm 7mm mm 9mm 7 7 7 0 0 3.9 3.9 3.9 3.9 3.9 3.9 3.9.0.7 5..0.5.0.3 ANSI B7. DIN 39 5 55

Impct Socket - Open Stock Impct Socket - Open Stock 3/"DR. IMPACT EXTENSION BAR 3/"DR. IMPACT UNIVERSA JOINT /"DR. PT. IMPACT SOCKET (METRIC) (mm) F M 370 370 3" " 75 0 5.. ANSI B7. 390 3/" 3/" 7. ANSI B7. 3303 330 3305 330 3307 330 3309 33 33 33 33 335 33 337 330 33 333 335 mm mm mm 3mm mm 5mm mm 7mm mm 9mm mm mm 3mm mm 7mm 9mm 30mm 3mm 7 7 7 7 7 7 7 7 7.7 7. 7. 7.9 7.9 7.9 7.9..5.7 9..0.0.. 5.5 5.7. ANSI B7. DIN 39 3/"DR. IMPACT ADAPTER /"DR. PT. IMPACT SOCKET (S.A.E.) /"DR. PT. DEEP IMPACT SOCKET (METRIC) F M 375 3/" /" 0 00.3 ANSI B7. DIN 39 33 33 333 33 335 33 337 33 339 33 7/" /" 9/" 5/" /" 3/" 3/" 7/" 5/" " 7 7 7 7 7 7.0 7. 7.9 7.9 9.. 9...7. ANSI B7. 303 30 305 30 307 30 309 3 3 3 3 35 37 39 30 3 33 35 mm mm mm 3mm mm 5mm mm 7mm mm 9mm mm mm mm mm 7mm 9mm 30mm 3mm 7 7 7 7 7 7 7 7 3.7 3. 3.......9. 3.0..7 7...3..5 ANSI B7. DIN 39 5 57

Impct Socket - Open Stock Impct Socket - Open Stock /"DR. IMPACT EXTENSION BAR /"DR. IMPACT UNIVERSA JOINT 3/"DR. PT. IMPACT SOCKET (METRIC) (mm) F M 339 3703 370 3705 370 3" 5" " " " 75 5 300 7 7 3 30 3..9 9.9.9. ANSI B7. 379 /" /" 90.0 ANSI B7. 35 3 37 3 39 35 35 35 353 35 355 35 357 35 359 3 35 35 353 35 355 35 357 35 359 7mm mm 9mm 0mm mm mm 3mm mm 5mm mm 7mm mm 9mm 30mm 3mm 3mm 33mm 3mm 35mm 3mm 37mm 3mm 39mm 0mm mm 7 7 7 7 7 7 5 5 5 5 3 3 3 3 3 3 3 3 3 3 3 3 3 30 30.5 7.5.0. 9.0.5 9.0 7.5..0.0 5.7.0.0.0 7.0 7.0 7.5 9.0 0.0 0.0.0. 9.0 ANSI B7. DIN 39 /"DR. IMPACT ADAPTER 3/"DR. PT. DEEP IMPACT SOCKET (METRIC) F M 37 377 /" /" 3/" 3/" 0 00 0.3.0 ANSI B7. DIN 39 305 30 307 30 309 3 3 3 33 3 35 3 37 3 39 30 3 3 33 3 35 3 3 39 7mm mm 9mm 0mm mm mm 3mm mm 5mm mm 7mm mm 9mm 30mm 3mm 3mm 33mm 3mm 35mm 3mm 37mm 3mm 0mm mm 3 3 3 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 9.5 0.0 0.0.0.9 3. 3. 3. 3. 3..0.0..7.0 7.0 7.3 7..0. 9.0 9.3.0. ANSI B7. DIN 39 5 59

Impct Socket - Open Stock Impct Socket - Open Stock 3/"DR. IMPACT EXTENSION BAR 3/"DR. IMPACT UNIVERSA JOINT "DR. PT. IMPACT SOCKET (METRIC) (mm) F M 370 37 " " 0 3/"DR. IMPACT ADAPTER F M 3 9.0.0 ANSI B7. 370 3/" 3/" 7.3 ANSI B7. 3 35 3 37 3 39 330 33 33 333 33 335 33 337 33 339 30 3 3 33 3 35 3 37 3 39 3 35 35 353 3mm 37mm 3mm 39mm 0mm mm mm 3mm mm 5mm mm 7mm mm 9mm mm 5mm 5mm 53mm 5mm 55mm 5mm 57mm 5mm 59mm 0mm 3mm 5mm 7mm mm 9mm 9.0 9. 9. 9. 9... 5. 5.7.7.3. 0.0 0. 0.. 7.0 7.3 7.7. 9. 9.5 3.....3 9.0 9. 37 37 3/" 3/" /" " 7 9.0.0 ANSI B7. DIN 39 ANSI B7. DIN 39 "DR. PT. DEEP IMPACT SOCKET (METRIC) 39 395 39 39 399 3930 393 393 3937 393 390 3mm 37mm 3mm 0mm mm mm 3mm mm 9mm mm 55mm 3. 3.5.0..3 5.5 5.5.0..5. ANSI B7. DIN 39 0

Wrench WORK WITH THE WRENCHES WIDER SIDE FOR... Combintion Offset Box End 0 MORE POWER WITH ESS STRESS 0 offset on box end to rech recessed fsteners Meet DIN 33 stndrd Deep Offset Double Box End Stronger Surfce Drive Plus - Provides stronger grip on fsteners - Reduces fstener rounding ength Up to 5% longer to ccess those hrd to rech fsteners 70 Improved comfort Up to 0% increse in surfce contct re (vs. stndrd hndle wrench) to reduce hnd ftigue Strength Improved box end strength Surfce Drive reduces fstener rounding 70 offset on box ends to rech recessed fsteners Meet DIN 33 stndrd 3

Wrench - Set Wrench - Set PC. X X-BEAM COMBINATION SET (METRIC) PC. X X-BEAM COMBINATION SET (METRIC) 9PC. COMBINATION SET (S.A.E.) 9PC. COMBINATION SET (METRIC) 0005.7 000. 0909 3.0 0900 3.0,,, 3,, 5, 7, 9mm,,, 3,, 5,, 7, m, 9mm /, 5/, 3/, 7/, /, 9/, 5/, /, 3/",,,, 3,, 5, 7, 9mm PC. COMBINATION SET (S.A.E.) PC. COMBINATION SET (METRIC) PC. COMBINATION SET (S.A.E.) PC. COMBINATION SET (METRIC) 0907 3.5 090 3. 090 9.0 090 5. 5/, 3/, 7/, /, 9/, 5/",,, 3,, 5mm /, 5/, 3/, 7/, /, 9/, 5/, /, 3/, 3/, 7/", 9,,,, 3,, 5, 7, 9, mm 5

Wrench - Set Wrench - Set 7PC. COMBINATION OFFSET BOX END SET (METRIC) 7PC. COMBINATION SET (METRIC) PC. COMBINATION SET (METRIC) PC. COMBINATION SET (S.A.E.) 00 5.5 0907 9.9 090.5 090 9.0, 7,, 9,,,, 3,, 5,, 7,, 9, 0,, mm,, 3,, 5, 7, 9mm, 9,,,, 3,, 7, 9,, mm 3/, 7/, /, 9/, 5/, /, 3/, 3/, 7/, 5/, " 7PC. COMBINATION SET (METRIC) PC. COMBINATION SET (METRIC) PC. COMBINATION SET (METRIC) PC. COMBINATION SET (METRIC) 09070.5 0909 0903 090.,,, 3,, 7, 9mm,,,,, 7,9, mm,,,, 3,, 7, 9,,, 30, 3mm, 9,,,, 3,, 5,, 7,, 9,, mm 7

Wrench - Set Wrench - Set PC. COMBINATION SET (METRIC) PC. COMBINATION SET (METRIC) 3PC. COMBINATION SET (METRIC) PC. COMBINATION SET (METRIC) 090 0.5 0905 0907 3.0 09093,,, 3,,, 7, 9,,,, 7, 30, 3mm,,, 3,, 7, 9,,, 3,, 7, 30, 3mm, 7,, 9,,,, 3,, 5,, 7,, 9, 0,,, 3,, 5, 7, 30, 3mm, 7,, 9,,,, 3,, 5,, 7,, 9, 0,,, 3,, 5,, 7,, 9, 30, 3mm PC. COMBINATION SET (S.A.E.) PC. COMBINATION SET (S.A.E.) 7PC. COMBINATION SET (METRIC) PC. DEEP OFFSET DOUBE BOX END SET (METRIC) 0909 3.0 0907 7. 0903.5 003 5.5 3/, 7/, /, 9/, 5/, /, 3/, 3/, 7/, 5/,, -/, -/, -/" /, 5/, 3/, 7/, /, 9/, 5/, /, 3/, 3/, 7/, 5/,, -/, -/, -/",,,, 7, 9, mm x7, x9, x, x3, x5, x7, x9, 0x, x3, x7, 30x3mm 9

Wrench - Set Wrench - Set PC. DOUBE BOX END SET (METRIC) 7PC. DOUBE BOX END SET (METRIC) PC. DOUBE BOX END SET (METRIC) PC. DOUBE OPEN END SET (METRIC) 090.0 0907 0.0 090. 0905.0 x, x3, x, 7x9, x3, xmm x, x, x, x7, 7x9, x3, xmm x, x, x3, x, x7, 7x9, 9x, x3, x, 3x, x7mm x7, x, x3, x, 7x9, x3mm PC. DOUBE BOX END SET (METRIC) PC. DOUBE BOX END SET (METRIC) 7PC. DOUBE OPEN END SET (METRIC) 7PC. DOUBE OPEN END SET (METRIC) 00 9. 00.9 0907.5 09073 9. 5.5x7, x, 9x, x, x7, 7x9, 9x, x7mm 5.5x7, x, 9x, x, x, x7, 7x9, 9x, x7, 30x3mm x, x, x, x7, 7x9, x3, xmm x7, x9, x, x3, x5, x7, 9xmm 70 7

Wrench - Set Wrench - Set PC. DOUBE OPEN END SET (METRIC) PC. DOUBE OPEN END SET (METRIC) 3PC. DOUBE OPEN END SET (METRIC) PC. E-TORX SET 0009 003 0909 3. 090.0 5.5x7, x, x, x, x7, 7x9, 9x, xmm x7, x9, x, x3, x5, x7, x9, xmm x7, x, x, x3, x, x7, 7x9, 9x, x3, x, 3x, x7, 30x3mm ExE, ExE, ExE, E0xE PC. DOUBE OPEN END SET (METRIC) PC. DOUBE OPEN END SET (METRIC) 7PC. STUBBY SET (METRIC) PC. FEX-SOCKET SET (METRIC) 00. 009 09033. 09037 9. 5.5x7, x, 9x, x, x, x7, 7x9, 9x, x7, 30x3mm x7, x9, x, x3, x5, x7, x9, x3, x7, 30x3mm,,, 3,, 7, 9mm,, 3,, 7, 9mm 7 73

Wrench - Set Wrench - Open Stock 3PC. FEX HEAD SOCKET SET (METRIC) 3PC. FARE NUT SET (S.A.E.) 090 7. 0903 3 5. x, x, 7x9mm 3/x7/, /x9/, 5/x/" X X-BEAM COMBINATION (S.A.E.) X X-BEAM COMBINATION (METRIC) (mm) D(mm) D(mm) (mm) D(mm) D(mm) 3PC. FARE NUT SET (METRIC) 0 0 03 0 05 0 07 0 5/" 3/" 7/" /" 9/" 5/" /" 3/" 5 3 0. 57 7.0.3. 0.3.0..5.5. 3.0 5..0 3.3 35. 3.0. 9 9 9 7 7 3 3 3.. 7. 7... 7.. 0 0 03 0 05 0 07 0 09 090 09 09 mm 9mm mm mm mm 3mm mm 5mm mm 7mm mm 9mm 55.3 5 3 95 0. 33 57 73 7.0.9.3. 9.0 0.3.0 3.0..5 7..5. 0. 3.0 5. 7..0 3.3 33.0 35. 3.0 3.7. 9 9 9 9 9 7 7 7 3 3 3 3. 5.. 7.. 7.... 7... 0903 3 9x, 3x, x7mm D 5 D 7 75

Wrench - Open Stock 7 Wrench - Open Stock 77 COMBINATION (METRIC) COMBINATION (S.A.E.) 033 00 00 003 00 005 00 007 00 009 0 0 0 03 0 05 0 07 0 09 00 035 0 03 037 0 03 0 0 03 0 05 0 07 0 09 0 0 0 03 0 05 0 5.5mm mm 7mm mm 9mm mm mm mm 3mm mm 5mm mm 7mm mm 9mm 0mm mm mm 3mm mm 5mm mm 7mm mm 9mm 30mm 3mm /" 5/" 3/" 7/" /" 9/" 5/" /" 3/" 3/" 7/" 5/" " -/" -/" -/" (mm) 7. 7. 33.7. 9. 59. 5.5 7. 7. 90.9 99.7 0. 5. 3.9.0.7 70.3 9.5 303. 3.7 33. 359. 359. 0.5 0.5 5. 5. (mm) 5.9 3. 5.3 5.5 7. 90.9 0. 5..0 70.3 9.5 3.7 33. 359. 0.5 30. D(mm) 3.5 3.5..7. 0.9 3.0 5. 7. 9.3 3.3 33. 35.5 37. 39.7. 3.9.0.. 5. 5. 5..7.7.9.9 D(mm) 3.5.7 0.9 3.0 7. 9.3 33. 35.5 39.7 3.9.0. 5. 5..7 5. D(mm).7.7.9 3.9 5.3 7.7. 0..5 3..3.7 7..5 9.7 30. 3.3 33.3 3. 3.0 3. 3. 0. 0..0.0 D(mm).7 3.9 5.3 7.7 0..5.5.7.5 30. 3.3 3. 3.0 3...0 9 9 9 9 3 3 3 3 3 3 3 3 3 3 3 9 9 3 3 3 3 3 3 3......7. 3. 3.. 5.5 5.9. 7.5 7. 7.. 9. 9.5 7. 9. 9..7 9. 9..0...7. 3.. 5.5 5.9 7.5 7.. 9. 7. 9. 9..0 ASME B7.0-0 (B7.) DIN 33 ASME B7.0-0 (B7.39) DIN 3 ASME B7.0-0 (B7.) DIN 33 JUMBO COMBINATION (S.A.E.) SAND BAST FINISHED JUMBO COMBINATION (METRIC) SAND BAST FINISHED 07 0 09 0 0 0 03 0 0 0 03 0 05 0 0 09 0 05 05-5/" -3/" -7/" -/" -5/" -3/" -7/" " 3mm 35mm 3mm 3mm mm mm mm mm mm 55mm 0mm (mm) 75 75 0 0 00 (mm) 75 75 0 0 00 7 75 D(mm).0.0 77.0 77.0.0.0 90.0 97.0 D(mm).0.0 5 5 0.0 0.0.0 7.0 7.0 9.0 9.0 D(mm).0.0 5 5 0.0 0.0.0 7.0 D(mm).0.0 5 5 0.0 0.0.0 7.0 7.0.0 9.0 - -.3.3.0.0. 5.7 0.7 0.7.3.3.0.0.. 5.7 0.7 0.7 7.5 9.5 5 D D DOUBE OPEN END (S.A.E.) DOUBE OPEN END (METRIC) 3 5 7 30 7 30 3 303 5 9 30 305 7 5 5 9 3 3 /x5/" 3/x7/" /x9/" 5/x/" /x3/" 3/x7/" 5/x" -/x-/" 5.5x7mm x7mm x9mm xmm 9xmm xmm xmm x3mm x3mm xmm 3x5mm 3xmm x5mm x7mm x7mm xmm 7x9mm x9mm 9xmm 9xmm xmm x3mm xmm 3xmm x7mm 7x30mm 30x3mm 30x3mm 3x3mm 3x3mm (mm) 7 0 300 333 (mm) 37 3 75 3 7 9 0 0 0 0 5 5 300 300 30 333 337 337 3 D(mm) 7.3 3. 9.9 3. 0.3. 5. 7.5 D(mm) 7.3 7.3 9..5 3. 3. 5.7 7. 7. 9.9 3.0 3.0 3.9 3. 3. 3. 0.3 0.3.5....7 5.9 5.9 3.3 7.5 70.3 70.3 7. D(mm) 3..5 7. 3.0 3..5.7 3.3 D(mm) 3. 3.0 7.3 7.3.5.5.5 3. 5. 5.7 7. 7. 9.9 9.9 3.0 3.0 3. 3. 0.3 0.3.5.5... 57.0 3.3.. 70.3 9 3 3 3 3 9 9 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3..9. 7.. 7...0...5.5.7.9.9 3.5.0.0.3 5. 5. 5. 7. 7....7.7.. 9... 5.5.5 7.0.. ASME B7.0-0 (B7.) ASME B7.0-0 (B7.39) ASME B7.0-0 (B7.) D D

Wrench - Open Stock Rtcheting Adjustble Wrench - Open Stock Verstility ser etched Metric/SAE mrkings Speed Smooth rtcheting ction is intuitive nd esy to use Convenience Rtcheting on/off switch llows wrench to lso be used s trditionl djustble wrench DOUBE BOX END (S.A.E.) 5 7 3/x7/" /x9/" /x3/" 3/x7/" 7/x5/" 5/x" (mm) 95 0 90 30 30 D(mm) D(mm).3. 9...3 7. 30. 33.3 3. 3.3 3. 37.3 3 3 3.0 5.....0 ASME B7.0-0 (B7.9) DOUBE BOX END (METRIC) 3 0 5 0 03 0 3 7 05 9 0 07 0 0 09 5 5.5x7mm x7mm x9mm xmm 9xmm xmm xmm x3mm x3mm xmm 3x5mm 3xmm x5mm x7mm x7mm xmm 7x9mm 9xmm 9xmm x3mm xmm 3xmm x7mm 7x30mm 30x3mm (mm) 9 70 5 5 0 95 95 05 0 0 3 35 35 35 0 70 90 30 30 30 397 37 D(mm) D(mm).0 3..5..3.3.3 5...3..3.. 0.. 0. 9...0.3.. 0. 3.0. 5..0.3. 7..3 7. 7. 30. 7. 3. 30. 33.3 3. 3.3 3. 37.3 3. 37.3 3..9 3.3 7. 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3.. 3. 3..0.0.0. 5. 5. 5.7 5.7.0.0 7. 7.. 7. 7..3....3. Verstility Movble jw works on ny - or -point fstener up to mm Strength Meet ANSI torque specifiction Comfort Unique hndle design ccommodtes wide vriety of hnd sizes. TPR soft grip mteril for mximum comfort.. 3.. ogo Pd printed logo on PP lyer ASME B7.0-0 (B7.9) DIN 3 D D 0 0 RATCHETING ADJUSTABE WRENCH (mm) (mm) T(mm) 703 " 5..5 3 3.0 ASME B7.0-0 (B7.) DIN 37 T 7 79

Wrench - Open Stock Wrench - Open Stock Hex jw design reduces slippge nd tightly grips bolt DOUBE SOCKET RATCHET HANDE (METRIC) (mm) D(mm) d(mm) d(mm) FEX HEAD SOCKET (METRIC) (mm) D(mm) D(mm) rger knurl for smoother opertion 7305 730 7309 73 73 737 739 73 xmm x7mm 7x9mm 7xmm 9xmm xmm xmm x7mm 35 70 3 3 3 355 355 3 3.0 3.0.0.0 53.0.5 0.0.0.0.0.0 30.0 3.5 9.0 3.5.0.0.0 3 3.5 3.5 3..5.0.0.0.0.0 3.0 7 7 73 7 75 7 X9mm xmm x3mm x5mm x7mm x9mm 0 39 55 9.5.0 9.0 9.5.0.0 3.5.0 9.0.5.0.0 90 90 90 90 90 90 9.7. 7.0.9.0 Wide opening jw for greter cpcity nd llows ech tool to work with more fstener sizes D Wide hndle for improved comfort nd better leverge d D D These fetures cn be found in prt no. 70~70 d ADJUSTABE WRENCH ADJUSTABE WRENCH WITH DIPPING GRIP FEX SOCKET (METRIC) T-HANDE PT. SOCKET (METRIC) (mm) (mm) T(mm) (mm) (mm) T(mm) (mm) D(mm) D(mm) (mm) T(mm) 70 70 703 70 705 70 707 70 " " " " " 5" " " 0 00 300 30 0 3..5 9. 33. 39. 5. 53.... 5. 7. 3. 7.7 35. 3 3 3...5...9 9.. ASME B7.0-0 (B7.) DIN 37 7 7 73 7 75 7 " " " " " 5".7 3.3 33 39.5 3.0 0.0 30.0 3.0..5..0 0. 3 3. 9.5... 9.3 ASME B7.0-0 (B7.) DIN 37 70 70 703 70 705 70 mm mm 3mm mm 7mm 9mm 95 30 35 55.0 9.0 9.0 9.5.0.0 0.9 5. 7. 9.3 35.5 39.7 7 7 7 7 7....5. 770 770 7703 770 7705 770 7707 77 77 mm 9mm mm mm mm 3mm mm 7mm 9mm 3 3 3 3 3 3 3 3 3 00 00 00 00 00 00 00 00 00 3 3 3 3 3 3 3..... 5.7 5.7 7. 7. T D D T T 0

Wrench - Open Stock A-Series Mechnicl Torque Wrench FARE NUT (METRIC) (mm) D(mm) D(mm) FARE NUT (S.A.E.) (mm) D(mm) D(mm) Durble 3-teeth terdrop rtchet hed Audible click nd/or impulse when torque setting is reched 00 0 0 0 03 xmm 9xmm xmm 3xmm x7mm 5 7.7 93. 7.3 9..0.9 9.0.0. 3.5. 3.0 3 3 3 3 3 3.3 3..0 5. 7.3 30 30 303 3/x7/" /x9/" 5/x/" 5 7.7 93..0.9 9.0.. 3.0 3 3 3 3. 5. 7.3 ASME B7.0-0 (B7.0) ASME B7.0-0 (B7.0) DIN 3 Mtte finish nd hrdened steel body Detent style locking collr prevents ccidentl chnge of torque setting Aluminum knurled hndle nd simplifies use with gresy hnds D D D D D ±3% clockwise ccurcy between 0% nd 0% of rnge Avilble in /"~3/" drive Electronic Torque Wrench STUBBY (METRIC) PIPE WRENCH 90 90 903 90 905 90 9 mm mm mm 3mm mm 7mm 9mm (mm) 9 5 7 3 D(mm) D(mm) 5.3 0.9 7.7 3.0.9 5. 0. 7.. 9.3. 35.5.5 39.7 9 9 9 3 3 3 5.3 5.3.0.7 3.3.5.3 ASME B7.0-0 (B7.) DIN 33 70 703 70 705 70 707 70 709 " " " " " " 3" " (mm) 90 0. 70 30 5.5 3 - - -.0.0.0.0 7.0 9.0 0.0 3.0 Thin profile 0-teeth terdrop rtchet hed for better ccess, incresed strength nd improved dirt infiltrtion Bcklit CD screen mkes reding torque vlues quick nd esy Buzzer nd Red, Yellow nd Green lights to lert user when trget torque is reched Shock-resistnt housing provides durbility D D Chrome plted nd hrdened steel body Torque Wrench is precision instrument. Plese refer to wrrnty conditions on Pge. ±% clockwise, ±3% counterclockwise ccurcy between 0% nd 0% of rnge Aluminum knurled hndle nd simplifies use with gresy hnds 3

T-Series Mechnicl Torque Wrench Double-X Pliers Quick-relese -teeth terdrop rtchet hed Audible click when torque setting is reched Productivity Mximum ccess nd strength with miniml movement Access Aligned serrted tips for precision gripping fstener up to mm Mtte finish steel body ocking collr prevents ccidentl chnge of torque setting Strength Flush rivet for strength nd nrrow profile ±% clockwise ccurcy between 0% nd 0% of rnge A-SERIES MECHANICA TORQUE WRENCH 9 9 93 93 933 9 9 Drive /" 3/" /" /" /" 3/" 3/" (mm) 57 55 03 5 5 Cpcity(Nm) -5 5-5 0-0 0-00 -30-5 -00..9.. 0... DIN 537-99-5903-9 EECTRONIC TORQUE WRENCH 953 955 Drive 3/" /" (mm) 0 0 Cpcity(Nm) 7-35 -339.7.5 DIN 537-99-5903-9 Comfort Two-tone mterils incresed comfort nd ergonomics Protect hnds working in high temperture Durbility Corrosion resistnt lloy steel Access Double rticultion ensures tht even with mximum opening of the spout nd hndle, the body of the clmp remins nrrow, providing brod ccess nd less effort Productivity Compound joint llows ccess with miniml hndle movement Jws open greter distnce thn the hndle for dded rech in tight loctions T-SERIES MECHANICA TORQUE WRENCH Drive (mm) Cpcity(Nm) CONVERSION FORMUA Nm = 0.9 Kgm = 0.7375 Ft/b Ft/b = 0.33 Kgm =.355 Nm Ft/b = Inch/b 9 903 9303 930 90 90 /" 3/" /" /" 3/" 3/" 3 35 535 5 5 9-30 0-0- 75-3 0-0 -700.9.0. 3..0. DIN 537-99-5903-9 REPAIR AND CAIBRATION SERVICE All Torque Wrenches should be checked for ccurcy periodiclly. This should be done t lest once yer, or every,000 torque ppliction cycles, whichever comes first. Reclibrtion is lso recommended fter ny bnorml hndling. WARRANTY SATA Torque Products re wrrntee to () be free of defects in mteril nd workmnship. () Accurcy stndrds for clibrtion re wrrntee for 90 dys from dte of purchse. Products for which wrrnty repir is requested should be returned, t Buyer's cost, to your nerest repir center. SATA Torque Products re precision instruments tht contin moving prts. These components re subject to norml wer through use, nd replcement there of is the responsibility of the Buyer. Torque Products should be routinely checked for clibrtion t n uthorized repir center using SATA repir prts. SUITABE Work in confined res nd hot prts. Relese ltches, clmps, connectors. SUPERFINE Allows work in extremely restricted res. PROFIE Extr long rech to get into confined & hot res. Torque Wrench is precision instrument. Plese refer to wrrnty conditions on Pge. This Wrrnty shll not pply to Products which hve been misused, bused, dmged by ccident or otherwise, repired by nyone other thn n uthorized repir center or modified by nyone other thn SATA Tools. 5

Double-X Pliers Pliers, Crimping Tool, Snips & Cutter THE VERSATIITY OF PIERS WITH THE SCOPE YOU VE NEVER SEEN! Profile superfine Allows work in extremely restricted res Extr long rech to get into confined & hot res Mde of chrome-nickel steel. Gives 30% longer service life thn CR-V steel TPE two-tone hndle provides better holding comfort Anti-slip nd oil resistnt AVAIABE IN STRAIGHT BEAK AND CURVED BEAK Suitble for Generl use Work in confined res nd hot prts Hold nd pull pieces Bending wires Relese ltches, clmps, connectors Blck finishing increse rust resistnt STRAIGHT ( ONG NOSE) (mm) T(mm) (mm) 5 DEGREE (mm) T(mm) (mm) Specil treted cutting edge cut wire hrdness up to HRC3 707 3-/" 0.0 7.0 3 3 0. 707 3-/" 75.0 7.0 3 3 0. ANSI B7.M DIN 53 ANSI B7.3M DIN 53 e e Specil leverge design tht reduces efforts by 0% T T 7

Pliers, Crimping Tool, Snips & Cutter Pliers, Crimping Tool, Snips & Cutter 5PC. SNAP RING SET ONG NOSE GROOVE JOINT SIP JOINT (mm) T(mm) (mm) b(mm) (mm) T(mm) (mm) b(mm) (mm) T(mm) (mm) b(mm) 095 - Snp Ring Pliers -.mm Stright Tip -.mm Stright Tip - 5 Degree Tip - 90 Degree Tip 5.3 70A 70A 70A 70A " " " " 59 07.5.0 9.0.0 Cutting Cpcity(mm) Copper Wire Ø., Iron Wire Ø.0, Hrd Wire Ø. Copper Wire Ø., Iron Wire Ø., Hrd Wire Ø.0 3.0. ANSI B7.3M DIN 53 70 70 703 70 70 70 703 70 " " " " " " " " 00 300 00.5 9.5 3.0 Pipe Di(mm) -3 5-5 5-5 -9.0 7 90.0 7.0 73.0 9 3 7 3 0 7.3.0 5.9. ANSI B7.3M DIN 53 705 705 705 705 " " " " 59 0 7.0 9. Pipe Di(mm) 5-30 -3.0 53.0 7 7.3 5. ANSI B7.3M DIN 53 T c b A style stright jws Body is mde of CR-V steel T b Body is mde of CR-V steel T b DIAGONA INESMAN INSUATED ONG NOSE INSUATED DIAGONA 700A 700A 7003A 700A 700A 7003A 5" " 7" 5" " 7" (mm) 30 T(mm).0.5 3.5 (mm).5 9.5 3.5 b(mm) 7 3 7.0.3 3.0 Cutting Cpcity(mm) Copper Wire Ø., Iron Wire Ø.0, Hrd Wire Ø. Copper Wire Ø., Iron Wire Ø., Hrd Wire Ø.0 Copper Wire Ø., Iron Wire Ø., Hrd Wire Ø.0 7030A 7030A 70303A " 7" " (mm) 00 7030A 7030A 70303A " 7" " T(mm).5 3.0 3.5 (mm).0.0 b(mm) 53.0 3 3 3 9.0. Cutting Cpcity(mm) Copper Wire Ø., Iron Wire Ø., Hrd Wire Ø.0 Copper Wire Ø., Iron Wire Ø., Hrd Wire Ø.0 Copper Wire Ø., Iron Wire Ø.5, Hrd Wire Ø.3 703 703 703 703 " " " " (mm) T(mm) (mm) b(mm).0.0 59.0 00.0 3.0 59.0 Cutting Cpcity(mm) Medium Hrd Wire Ø. Medium Hrd Wire Ø. 3.0. ANSI B7.3M DIN 53 703 7033 703 7033 " 7" " 7" (mm) T(mm) (mm) b(mm).0 9.0.0.5 30.0 Cutting Cpcity(mm) Medium Hrd Wire Ø. Medium Hrd Wire Ø.0 3 3..0 ANSI B7.M DIN 53 ANSI B7.M DIN 53 ANSI B7.3M DIN 53 T e b T b Body is mde of 0CR-V steel Surfce with ntirust Ferro-nickel lloy steel coting Hrdness of body is HRC0- Hrdness of cutter is HRC55-5 VDE certified, meet IEC/EN0900-00 stndrd For use in high-voltge res Up to 00V lternting current T b Body is mde of 0CR-V steel Surfce with ntirust Ferro-nickel lloy steel coting Hrdness of body is HRC0- Hrdness of cutter is HRC55-5 VDE certified, meet IEC/EN0900-00 stndrd For use in high-voltge res Up to 00V lternting current T b 9

Pliers, Crimping Tool, Snips & Cutter Pliers, Crimping Tool, Snips & Cutter INSUATED INESMAN MINIATURE INESMAN MINIATURE FAT NOSE MINIATURE DIAGONA (mm) T(mm) (mm) b(mm) (mm) T(mm) (mm) b(mm) (mm) T(mm) (mm) b(mm) (mm) T(mm) (mm) b(mm) 7033 7033 70333 7033 7033 70333 " 7" " " 7" " 00.0.0.0.0.0.0 Cutting Cpcity(mm) Medium Hrd Wire Ø. Medium Hrd Wire Ø.0 Medium Hrd Wire Ø.0 0.0 0.0 0.0 0 3 3 5.5. 7.0 ANSI B7.0M DIN 5 70A ".5 5.5 9.5 Cutting Cpcity(mm) Copper Wire Ø.5, Iron Wire Ø.3, Medium Hrd Wire Ø.0 9 9. ANSI B7.0M 70A 5" 5.0.5 9 9. ANSI B7.3M 705A " 7.0.0 Cutting Cpcity(mm) Copper Wire Ø.5, Iron Wire Ø.3, Medium Hrd Wire Ø.0 9 9. ANSI B7.M Performnce Comprison Clmp Constitution Performnce Comprison Clmp Constitution Performnce Comprison Clmp Constitution Body is mde of 0CR-V steel Surfce with ntirust Ferro-nickel lloy steel coting Hrdness of body is HRC0- Hrdness of cutter is HRC55-5 VDE certified, meet IEC/EN0900-00 stndrd For use in high-voltge res Up to 00V lternting current T b New sndwich designed structure gives 30% longer service life Hndle mde of two-tone PP plstic mteril T e b New sndwich designed structure gives 30% longer service life Hndle mde of two-tone PP plstic mteril T e b New sndwich designed structure gives 30% longer service life Hndle mde of two-tone PP plstic mteril T e b MINIATURE ONG NOSE MINIATURE BENT NOSE MINIATURE END NIPPERS CURVED JAW OCKING PIERS (mm) T(mm) (mm) b(mm) (mm) T(mm) (mm) b(mm) (mm) T(mm) (mm) b(mm) (mm) T(mm) (mm) 70A 5" 7.5.5 5.5 Cutting Cpcity(mm) Copper Wire Ø.5, Iron Wire Ø.3, Medium Hrd Wire Ø.0 9 9. ANSI B7.3M 703A 5" 7.5.5 5.5 Cutting Cpcity(mm) Copper Wire Ø.5, Iron Wire Ø.3, Medium Hrd Wire Ø.0 9 9. ANSI B7.3M 70A " 5 3.5 5.5 9 Cutting Cpcity(mm) Copper Wire Ø.5, Iron Wire Ø.3, Medium Hrd Wire Ø.0 9. ANSI B7.M 7 7 73 7 7 73 5" 7" " 5" 7" ".5 3.0..0.9 Mx Jws Opening(mm) 5 90 3 0.0 0.7 0.5 FederlGGG-W-009 Performnce Comprison Clmp Constitution Performnce Comprison Clmp Constitution Performnce Comprison Clmp Constitution New sndwich designed structure gives 30% longer service life Hndle mde of two-tone PP plstic mteril T e b New sndwich designed structure gives 30% longer service life Hndle mde of two-tone PP plstic mteril T e b New sndwich designed structure gives 30% longer service life Hndle mde of two-tone PP plstic mteril T e b Jws mde of Alloy Steel Hndle mde of CR-Mo Steel Curved jws with wire cutter 90 9

Pliers, Crimping Tool, Snips & Cutter Pliers, Crimping Tool, Snips & Cutter STRAIGHT JAW OCKING PIERS ONG NOSE OCKING PIERS C-CAMP OCKING PIERS CHAIN CAMP OCKING PIERS (mm) T(mm) (mm) (mm) T(mm) (mm) (mm) T(mm) (mm) (mm) T(mm) (mm) 7 73 7 73 7" " 7" " 5.5 3.0.5 9.0 Mx Jws Opening(mm) 0 3 0.0.0 FederlGGG-W-009 730 730 730 730 " 9" " 9" 9 5.0.0 3.0 57.0 Mx Cutter Opening(mm) 7 3.0 9. Mx Jws Opening(mm) 79 7 7 " " 73 Depth(mm) 7.5.0 3 Mx Jws Opening(mm) 93 0.0 770 770 9" 9" 7.5 Chin ength(mm) 5.0 3 9.3 Jws mde of Alloy Steel Hndle mde of CR-Mo Steel Jws mde of Alloy Steel Hndle mde of CR-Mo Steel Jws with wire cutter Jws mde of CR-V steel Hndle mde of CR-Mo Steel T Jws nd hndle mde of CR-Mo Chin is mde of crbon steel. WEDING CAMP OCKING PIERS META SHEET CAMP OCKING PIERS SNAP RING - EXTERNA OPEN STRAIGHT SNAP RING - EXTERNA OPEN CURVED (mm) T(mm) (mm) (mm) T(mm) (mm) (mm) Circlip(mm) (mm) Circlip(mm) 7 9" 0 9.0.7 3 5.9 7 " 3 70.5 7.0 3.9 700 7" 75-0 90.0 700 7" 75-0 90.0 7 9" Depth(mm) 70 Mx Jws Opening(mm) 7 " Width(mm) 7.5 Mx Jws Opening(mm) 700 7" Di(mm) Ø. 700 7" Di(mm) Ø. Jws nd Hndle mde of CR-Mo Steel T Jws nd Hndle mde of CR-Mo Steel T Mde of strong nd durble tempering lloy-steel Anti-rust blck finishing Mde of strong nd durble tempering lloy-steel Anti-rust blck finishing 9 93

Pliers, Crimping Tool, Snips & Cutter Pliers, Crimping Tool, Snips & Cutter SNAP RING - INTERNA COSE STRAIGHT SNAP RING - INTERNA COSE CURVED GERMAN TYPE SNAP RING PIERS INTERNA STRAIGHT GERMAN TYPE SNAP RING PIERS INTERNA CURVED (mm) Circlip(mm) (mm) Circlip(mm) (mm) Circlip(mm) (mm) Circlip(mm) 700 700 7" 7" 75 Di(mm) Ø. -5 90.0 7005 7" 75-5 90 7005 7" Di(mm) Ø..0 703 703 7033 703 5" 7" 9" 3" 5 75 5 35-9-0 3-0 5-3 3 3 3. 7.7. 9. 70 70 703 70 5" 7" 9" 3" 5 75 5 35-9-0 3-0 5-3 3 3 3. 7.7. 9. 703 703 7033 703 5" 7" 9" 3" Di(±0.05)(mm).5.75.5.95 DIN 55 70 70 703 70 5" 7" 9" 3" Di(±0.05)(mm).5.75.5.95 DIN 55 Mde of strong nd durble tempering lloy-steel Anti-rust blck finishing Mde of strong nd durble tempering lloy-steel Anti-rust blck finishing Mde of CR-V steel Mde of CR-V steel GERMAN TYPE SNAP RING PIERS EXTERNA STRAIGHT GERMAN TYPE SNAP RING PIERS EXTERNA CURVED ENERGY SAVING TYPE - INESMAN ENERGY SAVING TYPE - DIAGONA CUTTING (mm) Circlip(mm) (mm) Circlip(mm) (mm) T(mm) (mm) b(mm) (mm) T(mm) (mm) b(mm) 70 70 703 70 70 70 703 70 5" 7" 9" 3" 5" 7" 9" 3" 5 75 5 35 Di(±0.05)(mm).5.75.5.95-9-0 3-0 5-3 3 3 3 7.7. 9. DIN 55 70 70 703 70 70 70 703 70 5" 7" 9" 3" 5" 7" 9" 3" 5 75 5 35 Di(±0.05)(mm).5.75.5.95-9-0 3-0 5-3 3 3 3 7.7. 9. DIN 55 703A " 00.0.0 59.0 3 Cutting Cpcity(mm) Copper Wire Ø., Iron Wire Ø.5, Hrd Wire Ø.3.3 ANSI B7.0M DIN 5 730A 7303A 730A 7303A 7" " 7" " 75 00 70.5 70.5 7.0 7.0 59.0 59.0 3 3.5.3 Cutting Cpcity(mm) Copper Wire Ø., Iron Wire Ø., Hrd Wire Ø.0 Copper Wire Ø., Iron Wire Ø., Hrd Wire Ø.0 ANSI B7.M DIN 53 e b b Mde of CR-V steel Mde of CR-V steel T T 9 95

Pliers, Crimping Tool, Snips & Cutter Pliers, Crimping Tool, Snips & Cutter ENERGY SAVING TYPE - ONG NOSE ENERGY SAVING TYPE - END NIPPER PIERS D-SUB CONTACT CRIMPING TOO CABE FERRUES CRIMPING TOO (mm) T(mm) (mm) b(mm) (mm) T(mm) (mm) b(mm) (mm) (mm) (mm) (mm) 70A " 00.0.0 59.0 3.7 73A " 00.0.0 59.0 3. 9 " 0 7.0 30. 9 " 0 7.0 30. Cutting Cpcity(mm) Copper Wire Ø., Iron Wire Ø., Hrd Wire Ø.0 ANSI B7.3M DIN 53 Cutting Cpcity(mm) Copper Wire Ø., Iron Wire Ø., Hrd Wire Ø.0 AWG 30- - Cpcity 0.5-0.5MM² 0.5-MM² Crimping Shpe: AWG -0 - - - - Cpcity 0.5-0.75MM² -.5MM².5MM² MM² MM² Terminl Shpe: T c b b High ccurcy connector crimping pin to modertely press connector on cble wire without dmging the connector Mde of high crbon steel with glss fiber hndle Adjustble locking mechnism esily controlled by pressing/relese of hndle High ccurcy connector crimping pin to modertely press connector on cble wire without dmging the connector Mde of high crbon steel with glss fiber hndle Adjustble locking mechnism esily controlled by pressing/relese of hndle WIRE & CABE CUTTING PASTIC CUTTING COAX CRIMPING TOO HEAVY DUTY CRIMPING TOO (mm) (mm) (mm) (mm) (mm) (mm) 7 7 73 7 7 73 " " " " " " 00 Cutting Rnge(mm) Ø9 Ø Ø3 90 9.9 7. 7.0 70 70 703 70 70 703 5" " 7" 5" " 7" 5 75 Cutting Rnge(mm) ResinØ3 ResinØ5 ResinØ 0 3.0 9.0.0 ANSI B7.M 9 9-/" 0 7.0 Crimping rnge.7mm²,.5mm², 5.MM²,.MM²,.MM² Terminl Shpe: Coxil Cble 3 9.5 95 9" 0 7.0 30 AWG - - - Cpcity 0.5-MM².-.5MM² -MM² Terminl Shpe:.0 For cutting vinyl coted or copper cble Mde of 0CR-V steel Body hrdness HRC3- Cutting edge hrdness HRC5- Jpnese curved style with spring For cutting plstic/vinyl coted cble Not for use in cutting metl mteril Not covered under ifetime Wrrnty. High ccurcy connector crimping pin to modertely press connector on cble wire without dmging the connector Mde of high crbon steel with glss fiber hndle Adjustble locking mechnism esily controlled by pressing/relese of hndle High ccurcy connector crimping pin to modertely press connector on cble wire without dmging the connector Mde of high crbon steel with glss fiber hndle Adjustble locking mechnism esily controlled by pressing/relese of hndle 9 97

Pliers, Crimping Tool, Snips & Cutter Pliers, Crimping Tool, Snips & Cutter HEAVY DUTY NON - INSUATED CRIMPING TOO TAB CONNECTOR CRIMPING TOO AVIATION TIN SNIPS - RIGHT AVIATION TIN SNIPS - STRAIGHT (mm) (mm) (mm) (mm) (mm) T(mm) (mm) b(mm) (mm) T(mm) (mm) b(mm) 9 -/" 7.0 30 9.0 97 9" 7.0 30.3 93 " 70.5.0 77.0 3. 933 93 " " 75 70.5 70.5.0.0 77.0 77.0 3 0. 9. AWG - - - - Cpcity.5MM².5-MM² -MM² MM² AWG - - - Cpcity 0.5-MM².-.5MM² -MM² Terminl Shpe: ANSI B7.M ANSI B7.M Terminl Shpe: b b High ccurcy connector crimping pin to modertely press connector on cble wire without dmging the connector Mde of high crbon steel with glss fiber hndle Adjustble locking mechnism esily controlled by pressing/relese of hndle High ccurcy connector crimping pin to modertely press connector on cble wire without dmging the connector Mde of high crbon steel with glss fiber hndle Adjustble locking mechnism esily controlled by pressing/relese of hndle Drop forged se- chrome-vndium steel bldes with serrted edges Hrdened HRC 55-0 Induction hrdened cutting edges 0- HRC Cuts up to.mm cold rolled steel or 0.7 mm stinless steel Not covered under ifetime Wrrnty. Drop forged se- chrome-vndium steel bldes with serrted edges Hrdened HRC 55-0 Induction hrdened cutting edges 0- HRC Cuts up to.mm cold rolled steel or 0.7 mm stinless steel Not covered under ifetime Wrrnty. MODUAR CONNECTOR CRIMPING TOO AVIATION TIN SNIPS - EFT SEF ADJUSTING CUTTER STRIPPER WIRE STRIPPER W/CUTTER (mm) T(mm) (mm) b(mm) (mm) T(mm) (mm) b(mm) (mm) T(mm) (mm) (mm) T(mm) (mm) b(mm) 99 9" 30.0.0 9.0.0 93 " 70.5.0 77.0 3. 9 -/" 70.5 0.0 0 5.9 9 " 55 70.5 77.0 9 7" 3 70.5 0.0 77.0. 9. Crimping rnge PC, PC, PC, PC, PC, PC, PC, PC, PC ANSI B7.M Wire stripping rnge Single wire or flt cble of dimeter from 0.5~.0mm 9 9 " 7" AWG 0-30 - Cpcity 0.5-0.05MM² 0.3-5.MM² b High ccurcy connector crimping pin ensure cble wire nd connector re contcted properly. Connector rnge from telephone nd network connector, including P, P nd P Wire strpping nd cutting functions T b Drop forged se- chrome-vndium steel bldes with serrted edges Hrdened HRC 55-0 Induction hrdened cutting edges 0- HRC Cuts up to.mm cold rolled steel or 0.7 mm stinless steel Not covered under ifetime Wrrnty. T Accurte wire stripping pin for esy cutting of insulted surfce without dmging the inner wire Circlip design for convenient storge Plstic hndle for comfortble use Body is mde of high crbon steel 9 99

Pliers, Crimping Tool, Snips & Cutter Pliers, Crimping Tool, Snips & Cutter AUTOMATIC WIRE STRIPPER TYPE A AUTOMATIC WIRE STRIPPER TYPE B BOT CUTTER (mm) (mm) (mm) (mm) b(mm) 9 7" Wire cpcity Ø0.5,.,.,.0MM 0. 93 7" 0 Wire cpcity Ø,.,,., 3.MM. 93 933 93 935 93 937 93 939 " " " " 30" 3" " " 35 370 70 3 75 97 53 3.0 0.0 0.0.0.0.0.0 39.0.0.0.0.0 90.0.0.0 0 0 0 5 3.0.5 3.5 5. 7.0.0.0 93 933 93 935 93 937 93 939 " " " " 30" 3" " " Cutting Cpcity(mm) ow Crbon Steel Ø5(3/"), Medium Crbon Steel Ø(5/") ow Crbon Steel Ø7(/"), Medium Crbon Steel Ø5(3/") ow Crbon Steel Ø(5/"), Medium Crbon Steel Ø(/") ow Crbon Steel Ø(3/"), Medium Crbon Steel Ø(5/") ow Crbon Steel Ø3(/"), Medium Crbon Steel Ø(3/") ow Crbon Steel Ø(5/"), Medium Crbon Steel Ø(7/") ow Crbon Steel Ø9(3/"), Medium Crbon Steel Ø(9/") ow Crbon Steel Ø(7/"), Medium Crbon Steel Ø(5/") Provide ccurte wire stripping function without dmging the inner wire In ccordnce to QB/T07-99 mnufcturing stndrd Not covered under ifetime Wrrnty. Provide ccurte wire stripping function without dmging the inner wire In ccordnce to QB/T07-99 mnufcturing stndrd Not covered under ifetime Wrrnty. Do not cut medium or high crbon steel with HRC>35. Do not twist or pry with tool while cutting. Not covered under ifetime Wrrnty. ANSI B7.M b STRAIGHT PATTERN SNIPS BOT CUTTER TUBING CUTTER TUBING CUTTER 9330 93303 9330 93305 9330 " " " " " (mm) 05 5 305 355 5 (mm) 30.0 3 0.0 0 b(mm) 7.0.0.0-3 7..9 7.0.0 9.0 93 " (mm).5 (mm) b(mm).0 3.5 0 Cutting Cpcity(mm) ow Crbon Steel Ø3.7(/"), Medium Crbon Steel Ø3.7(/") 9. 9730 9730 Cutting Rnge(mm) 3-30 3-3 0 0 5.7 9. 97303 Cutting Rnge(mm) -.7 9330 93303 9330 93305 9330 " " " " " Cold rolling iron sheet 0.MM 0.7MM 0.9MM.MM.MM Stnless steel sheet 0.MM 0.5MM 0.3MM 0.7MM MM ANSI B7.M b b For copper, brss, or luminum tubing nd thin-wll conduit Feed knob contins bckup bldes Keep the wheel wy from the blde nd mintins with lubricnts regulrly For copper, brss, or luminum tubing nd thin-wll conduit Feed knob contins bckup bldes Keep the wheel wy from the blde nd mintins with lubricnts regulrly One-piece drop forged construction Cutting edges induction hrdened to HRC 5-0 Bulldog pttern snips for trimming extr hevy stock Not covered under ifetime Wrrnty. Do not cut medium or high crbon steel with HRC>35. Do not twist or pry with tool while cutting. Not covered under ifetime Wrrnty. Not covered under ifetime Wrrnty. Not covered under ifetime Wrrnty. 0

Pliers, Crimping Tool, Snips & Cutter Insulted Screwdriver PVC TUBING CUTTER MINI TUBING CUTTER 9730 Cutting Rnge(mm) 3- Cutting Rnge(mm). 97305 3-. Blde is mde of high performnce chrome vndium molybdenum lloy steel, fully hrden nd tempered to provide mximum strength nd durbility Individully tested to,000 volts nd rted up to 00 volts for sfety. Meet DIN stndrds nd GS / VDE certified Hndle locks for sfety For cutting PVC tubes only Het tretment on stinless steel blde for durbility Not covered under ifetime Wrrnty. For cutting copper, luminum, brss nd thin wll tubing rge knob for greter torque Suitble for use in confined spce Not covered under ifetime Wrrnty. Ergonomic dul mteril (PP+TPR) hndle for comfort nd strength. Oil nd solvent resistnt PC SPARE BADE PC SPARE BADE 973 3.0xmm 0. 973.xmm,.xmm 0.9 Mde in Germny Spre blde for 9730, 9730 nd 97305 tubing cutter Mde of hrdened lloy steel For cutting copper, luminum, brss nd thin wll tubing Spre blde for 97303 tubing cutter Mde of hrdened lloy steel For cutting copper, luminum, brss nd thin wll tubing Every single hndle is individully tested for mximum sfety performnce. Suitble for working on live circuits of 00V. Slim tip design ccesses fsteners in tight res fster nd esier. Not covered under ifetime Wrrnty. Not covered under ifetime Wrrnty. Alwys clen the tools fter usge. It is importnt to keep the tools clen nd dry both in use nd when storing the tools. Check the tools on regulr bsis nd if there is ny sign of dmge or wer on insultion lyer, the tool should be replced. 3

A-Series Screwdriver P-Series Screwdriver Blde is mde of chrome vndium lloy steel, fully hrden nd tempered to provide mximum strength nd durbility Blde is mde of chrome vndium lloy steel, fully hrden nd tempered to provide mximum strength nd durbility Unique texture design provides non slip grip Precision finished tip Precision finished tip Acette hndle for greter strength, durbility nd impct resistnt Ergonomic polypropylene hndle for comfort nd performnce T-Series Screwdriver Rtcheting Screwdriver Blde is mde of chrome vndium lloy steel, fully hrden nd tempered to provide mximum strength nd durbility Go-through design for tpping the hed of the screw Mgnetic tip for greter fstener control. Precision finished tip Ergonomic dul mteril (PP+TPR) hndle for comfort nd strength. Oil nd solvent resistnt Interchnge shft system High torque rtcheting design Fine tooth with movement Ergonomic dul mteril helps reduce ftigue nd improve grip nd torque 5

Screwdriver & Nut Driver - Set Screwdriver & Nut Driver - Set 7PC. COMBINATION INSUATED SET PC. A-SERIES COMBINATION SET PC. A-SERIES COMBINATION SET PC. T-SERIES COMBINATION SET 0930A 3. 09303E 5.0 0930 5. 09309 7. PHIIPS - #0x0mm, #x0mm, #x0mm SOTTED -.5x75mm, x0mm 5.5x5mm,.5xmm PHIIPS - #0x75mm, #x0mm, #x0mm SOTTED - 3.x75mm, 5x75mm, x0mm PHIIPS - #x75mm, #x3mm, #x0mm, #xmm SOTTED - 5x75mm, x3mm, x0mm, xmm PHIIPS - #x75mm, #x0mm, #xmm SOTTED - 5x75mm, 5x0mm, xmm Mde in Germny PC. A-SERIES COMBINATION SET PC. A-SERIES TORX SET PC. P-SERIES TORX SET PC. P-SERIES COMBINATION SET 0930E 3.0 09305 5 7.0 09307 5 7. 0930 5 7.3 PHIIPS - #x0mm, #x3mm, #x0mm #xmm, #3xmm SOTTED - 5x75mm, x3mm, x0mm xmm, xmm TORX - Tx75mm, Tx0mm, T5x0mm T0x0mm, T5x0mm, T7x0mm T30x0mm, T0x0mm TORX - Tx75mm, Tx0mm, T5x0mm, T0x0mm, T5x0mm, T7x0mm, T30x0mm, T0x0mm PHIIPS - #x3mm, #x75mm, #x0mm, #xmm SOTTED - x3mm, 5x75mm, x0mm, xmm 7

Screwdriver & Nut Driver - Set Screwdriver & Nut Driver - Set PC. PRECISION SOTTED SET PC. PRECISION COMBINATION SET 7PC. PRECISION TORX SET 9PC. PRECISION COMBINATION SET 093 3. 093 3. 0935 3.9 093.9 SOTTED -.0x0mm,.x0mm,.0x0mm.x0mm, 3.0x0mm, 3.5x0mm PHIIPS - #0x0mm, #-x0mm SOTTED -.x0mm,.0x0mm.x0mm, 3.0x0mm TORX - T5x0mm, Tx0mm, T7x0mm, Tx0mm T9x0mm, Tx0mm, T5x0mm PHIIPS - #0-3x0mm, #0-x75mm, #0x75mm, #x0mm SOTTED -.0x0mm,.0x0mm,.x95mm 3.0x75mm,.0x0mm PC. PRECISION TORX SET 7PC. PRECISION COMBINATION SET 5PC. PRECISION COMBINATION SET PC. RATCHETING SCREWDRIVER SET 0933 3. 093 3.9 0937. 093 5. TORX - Tx 0mm, T7x0mm, Tx0mm T9x0mm, Tx0mm, T5x0mm PHIIPS - #0-3x0mm, #0-x0mm, #0x0mm SOTTED -.x0mm,.0x0mm.x0mm, 3.0x0mm PHIIPS - #0-3x0mm, #0x0mm, #-x0mm SOTTED -.0x0mm,.0x0mm, 3.0x0mm, 3.5x0mm TORX - Tx0mm, Tx0mm, Tx0mm, T5x0mm HEX -.5x0mm,.0x0mm,.5x0mm, 3.0x0mm - T-Hndle Rtcheting Screwdriver - /" x /"Dr. Extension " - /" x /"Dr. Flex Extension " - /"Dr. Bit Adpter 0 - Bits Zip bg nd screwdriver bits re not covered under ifetime Wrrnty. 9

Screwdriver & Nut Driver - Set Screwdriver & Nut Driver - Set & Open Stock 5PC. RATCHETING SCREWDRIVER SET PC. RATCHETING SCREWDRIVER SET 0PC. /"DR. RATCHETING BIT DRIVER SET 093 5.3 0933 5. 093 9.0 - Stubby Rtcheting Screwdriver - Mgnetic Bit Holder 3-/" - /" x /"Dr. Extension 3-/" - /" x /"Dr. Flex Extension " - /"Dr. Bit Adpter 0 - Bits Zip bg nd screwdriver bits re not covered under ifetime Wrrnty. - Stndrd Rtcheting Screwdriver - /" x /"Dr. Extension 3-/" - /" x /"Dr. Extension " - /" x /"Dr. Extension " - /" x /"Dr. Flex Extension " - /"Dr. Bit Adpter 0 - Bits Zip bg nd screwdriver bits re not covered under ifetime Wrrnty. 33-5 Bits Phillips #0, #, #(pc), #3 Slotted 3,, 5, 5.5,,.5mm Hex,.5, 3,, 5, mm Torx T, T, T5, T0, T5, T7, T30, T0 Tmper Torx T, T, T5, T0, T5, T7, T30, T0 3 - Bits Phillips #0, #, #, #3 Slotted 3,, 5, 5.5,,.5mm Hex,.5, 3,, 5, mm Torx T, T, T5, T0, T5, T7, T30, T0 Tmper Torx T, T, T5, T0, T5, T7, T30, T0-5 Double End Bits PH-PH, PH-PH, PH3-PH3,.5mm-PH, 5.5mm-PH,.5mm-PH3, PH-PH, PH-PH3 3 - Double End Bits PH-PH, PH-PH, PH3-PH3 - Accessories 5 Adpter Bit for Socket Adpter Bit for Socket Mgnetic Bit Holder 0mm Rtcheting Bit Driver Screwdriver bits re not covered under ifetime Wrrnty. 0PC. /"DR. RATCHETING BIT DRIVER SET A-SERIES SOTTED A-SERIES PHIIPS 093 - pt. Metric Sockets 3.5,,.5, 5, 5.5,, 7,, 9,,,, 3, mm - 5 Bits Phillips #0, #, #, #3 Slotted 3,, 5.5,.5mm Hex,.5, 3,, 5, mm Torx T, T5, T0, T5, T7, T30, T0 Tmper Torx T, T5, T0, T5, T7, T30, T0 - Bits Phillips #, #, #3 Slotted, 5.5,.5mm Hex, 5, mm Torx T5, T0, T5 - Accessories 5 Adpter Bit for Socket Adpter Bit for Socket Mgnetic Bit Holder 0mm Rtcheting Bit Driver Flex Shft Bit Adpter.0 0 03 0 05 07 0 09 3 5 7 3.x75mm 3.x0mm 3.xmm 3.x00mm 5x75mm 5x0mm 5xmm 5x00mm x3mm x0mm xmm x00mm xmm xmm x00mm (mm) 75 5 75 5 90 0 90 9 03 53 303 353 5 35 3.5 3.5 3.5 3.5.0.0.0.0 35.5 3.0 3.0 3.0 3.0 35.5 35.5 B(mm) 3. 3. 3. 3..0.0.0.0.0.0.0 00 57 0 300 300 0 0 90. 9.3 0... 9.5 7. 9.. 3.7 5.3 7.0.7 9.. ANSI B7.5 DIN 55 30 303 30 305 307 30 309 3 3 3 33 3 35 3 37 #0x75mm #0x0mm #0xmm #0x00mm #x75mm #x0mm #xmm #x00mm #x3mm #x0mm #xmm #x00mm #xmm #3xmm #3x00mm (mm) 75 5 75 5 90 0 90 9 03 53 303 353 5 35 3.5 3.5 3.5 3.5.0.0.0.0 35.5 3.0 3.0 3.0 3.0 35.5 35.5 B(mm) 3. 3. 3. 3..0.0.0.0.0.0.0 00 00 57 0 300 300 0 0 90..7 0.3.. 9.7 7.7 9.5.9 3.7 5. 7.0.9 9.5.7 ANSI B7.5 DIN 5 Screwdriver bits re not covered under ifetime Wrrnty. B A B A

Screwdriver & Nut Driver - Open Stock Screwdriver & Nut Driver - Open Stock A-SERIES TORX NUT DRIVER T-SERIES GO-THROUGH SOTTED T-SERIES GO-THROUGH PHIIPS (mm) B(mm) (mm) B(mm) (mm) B(mm) (mm) B(mm) 3 5 7 Tx75mm Tx0mm T5x0mm T0x0mm T5x0mm T7x0mm T30x0mm T0x0mm 5 90 90 90 03 03 03 03 3.5 3.5 3.5 3.5 3.0 3.0 3.0 3.0.0.0.0.0 7.0 00 300 300 300. 0.0 9.7 9.7.0.0 0.7.5 3 5 7 5x75mm x75mm 7x75mm x75mm 9x75mm x75mm x75mm x75mm 7 7 7 7 7 90 90 90 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0....0.5.0.0.0 5.5 7.3.9 7. 7. 0. 0. 0. 3 5 7 x0mm xmm xmm x00mm xmm 7.5 3.5 37.5 35.5 35.5 39.0 39.0 39.0.0.0.0.0.0.7 7.3.7.7.0 ANSI B7.5 DIN 5 703 705 70 707 70 #x0mm #xmm #3xmm #3x00mm #3xmm 7.5 3.5 37.5 35.5 35.5 39.0 39.0 39.0.0.0.0.0.0.7 7.3.5. 7. ANSI B7.5 DIN 5 ANSI B7.5 DIN 5 ANSI B7.5 DIN 5 B A B A B A B A MAGNETIC BIT DRIVER RATCHETING BIT DRIVER T-SERIES SOTTED (mm) B(mm) (mm) B(mm) 0 /"x0mm 35.5.0 0. 03 /"x0mm 3 ANSI B7.5 DIN 5.0 ANSI B7.5 DIN 5 30 303 30 305 307 30 309 3 3 3 33 3 35 3 37 3x75mm 3x0mm 3xmm 3x00mm 5x75mm 5x0mm 5xmm 5x00mm x3mm x0mm xmm x00mm xmm xmm x00mm.3 5.3 35.3 5.3 79.3 0.3 5.3 30.3 9.0.3.3 3.3 3.3 7.3 3.3.0.0 3.5 3.5.0.0.0.0 35.5 3. 3. 3.0 3.0 35.5 3. 3.0 3.0 3.0 3.0.0.0.0.0.0.0.0 7 3 7 7 3 7 7.7... 3.3 3..9.5.5. 5.. 3.3.0.0 ANSI B7.5 DIN 55 B A B A 3

Screwdriver & Nut Driver - Open Stock Screwdriver & Nut Driver - Open Stock 5 P-SERIES PHIIPS T-SERIES DUA HEAD 0 03 0 05 0 #&mmx3mm #&5mmx0mm #&mmx0mm #&5mmxmm #&mmxmm (mm) 9.0.3.3.3.3 B(mm)..... 3.0 3. 3. 3. 3. 3. 3. 3... ANSI B7.5 DIN 5 Not covered under ifetime Wrrnty. P-SERIES SOTTED T-SERIES PHIIPS 0 0 03 0 05 0 07 0 0 07 09 00 0 0 03 0 0 05 09 030 3 5 7 7 9 3 5 9 3 33 3 35 37 3 39 35 35 35 353 35 355 35 357 3x75mm 3x0mm 3xmm 3x00mm 5x75mm 5x0mm 5xmm 5x00mm 5xmm 5x300mm x3mm x0mm xmm x00mm xmm x300mm xmm x00mm xmm x300mm #0x75mm #0x0mm #0xmm #0x00mm #x75mm #x0mm #xmm #x00mm #xmm #x300mm #x3mm #x0mm #xmm #x00mm #xmm #x300mm #3xmm #3x00mm #3xmm #3x300mm #0x75mm #0x0mm #0xmm #0x00mm #x75mm #x0mm #xmm #x00mm #x3mm #x0mm #xmm #x00mm #xmm #3xmm #3x00mm (mm) 57.. 3.. 7 03 53 303 353 03 0 3. 3. 33. 33. 3. 3. 33.5 373.5 3.5 (mm) 57.. 3.. 7 03 53 303 353 03 0 3. 3. 33. 33. 3. 73.5 33.5 373.5 3.5 (mm).3 5.3 35.3 5.3 79.3 0.3 5.3 30.3 9.0.3.3 3.3 3.3 7.3 3.3 B(mm) 3.0 3.0 3.0 3.0.0.0.0.0.0.0.0.0.0.0 B(mm) 3.0 3.0 3.0 3.0.0.0.0.0.0.0.0.0.0.0 B(mm) 3.0 3.0 3.0 3.0.0.0.0.0.0.0.0.9.9.9.9 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3. 3. 3. 3. 3. 37. 37. 37. 37..9.9.9.9 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3. 3. 3. 3. 3. 37. 37. 37. 37..0 3.5 3.5 3.5.0.0.0.0 3.0 3. 3. 3.0 3. 3. 3. 9 9 9 9 7 7 7 7 7 9 9 7 7 7 7 7 3 7 3 7 7 7... 7..5...0.5.5 7...0 5. 3...0 3.5 3..0. 5. 5. 7..5...0.5.5 7...0.0 3...0 3.5 3..0..5.. 3. 3. 3.0.3.. 5.5.0 3.5.0.0 ANSI B7.5 DIN 5 ANSI B7.5 DIN 5 ANSI B7.5 DIN 5 B A INSUATED PHIIPS INSUATED SOTTED 3 3 3 33 3 35 #0x0mm #x0mm #x0mm #3xmm.5x75mm 3x0mm x0mm 5.5x5mm.5xmm (mm) 0 70 (mm) 3 0 33 5 B(mm).. 9.3. B(mm).7. 7.9.7 9.0 C(mm) 3.0.5.0.0 C(mm).5 3.0.0 5.5.0 3. 3. 3.0.0 5.9 3.3 3.3 3. 0 0 0 0 0 0 00 00.9 0.7.9.. 0. 0.5 7. 0. ANSI B7.5 DIN 5 ANSI B7.5 DIN 5 C A B Mde in Germny Mde in Germny C A B P-SERIES TORX 0 0 03 0 05 0 07 0 Tx75mm Tx0mm T5x0mm T0x0mm T5x0mm T7x0mm T30x0mm T0x0mm (mm) 57. 03 03 03 3. 3. 3. 3.5 B(mm) 3.0.0.0.0.0.9 3.0 3.0 3.0 3. 3. 3. 37. 7 5........ ANSI B7.5 DIN 5 B A B A B A B A

Hex Key Hex Key - Set All hex keys re precision formed to exct dimensionl tolernces for precise fit Chmfered tips for fster insertion Mde of Chrome Vndium steel to provide mximum strength nd durbility Strong torque performnce meeting ANSI specs 9PC. EXTRA ONG BA POINT SET (METRIC) 09A.5,,.5, 3,, 5,,, mm 3.9 PC. EXTRA ONG BA POINT SET (S.A.E.) 09 3 /, 5/, 3/3, 7/, /, 9/, 5/3, 3/, 7/3, /, 5/, 3/" 7. Bll point keys llow for ngled ccess to fsteners Mde of Chrome Vndium Steel to provide mximum strength nd durbility 9PC. EXTRA ONG SET (METRIC) PC. EXTRA ONG SET (S.A.E.) 093A 3.9 09 3.9.5,,.5, 3,, 5,,, mm /, 5/, 3/3, 7/, /, 9/, 5/3, 3/, 7/3, /, 5/, 3/" Up to 30% longer for improved ccess nd leverge 7

Hex Key - Set Hex Key - Set 9PC. ONG ARM BA POINT SET (METRIC) PC. ONG ARM BA POINT SET (S.A.E.) 9PC. EXTRA ONG BA POINT WITH HANDE (METRIC) PC. ONG ARM TORX SET (TAMPER-PROOF) 095A 7.0 09.5 09 7. 0970 7 7..5,,.5, 3,, 5,,, mm /, 5/, 3/3, 7/, /, 9/, 5/3, 3/, 7/3, /, 5/, 3/",.5, 3,, 5,, 7,, mm T, T7, T, T9, T, T5, T0, T5 Hndle increses Torque, Comfort nd Sfety 9PC. ONG ARM SET (METRIC) PC. ONG ARM SET (S.A.E.) 9PC. ONG ARM TORX SET (TAMPER-PROOF) PC. FOD-UP SET (METRIC) 097A 9. 09 9.9 0970. 09 7.3.5,,.5, 3,, 5,,, mm /, 5/, 3/3, 7/, /, 9/, 5/3, 3/, 7/3, /, 5/, 3/" T, T5, T0, T5, T7, T30,T0, T5, T.5,,.5, 3,, 5,, mm Compct design with uncompromised strength llows esy crry nd verstile pplictions 9

Hex Key - Set Hex Key - Open Stock 9PC. FOD-UP SET (S.A.E.) PC. FOD-UP TORX SET (TAMPER-PROOF) EXTRA ONG BA POINT (METRIC) EXTRA ONG ARM (METRIC) (mm) D(mm) (mm) D(mm) 09 7 3.3 093 7 5/, 3/3, 7/, /, 9/, 5/3, 3/, 7/3, /" T9, T, T5, T0, T5, T7, T30, T0 3. 0A 05A 0A 07A 0A 0A 0A 0A 0A.5mm mm.5mm 3mm mm 5mm mm mm mm 9 3 3 07 33.5.0.5 3.0.0.0.0.0 7 7 7 3 3 3 3 0 00 0 0 300 0 3.3. 3. 5.... 3.0.9 030A 0305A 030A 0307A 030A 03A 03A 03A 03A.5mm mm.5mm 3mm mm 5mm mm mm mm 9 3 3 07 33.5.0.5 3.0.0.0.0.0 7 7 7 3 3 3 3 3 3 3 7 7. 3.7 3.7..5 5..5.5 3.9 DIN 9 DIN 9 Compct design with uncompromised strength llows esy crry nd verstile pplictions Compct design with uncompromised strength llows esy crry nd verstile pplictions D D CADDY FEATURE Cddy holder offers esy removl of keys. No need to remove lrger keys in order to remove the smller ones Mde of nylon fiber mteril for impct resistnt nd durbility ONG ARM BA POINT (METRIC) A 5A A 7A A A A A 3A A A.5mm mm.5mm 3mm mm 5mm 5.5mm mm 7mm mm mm (mm) 75 9 9 5 3 5 D(mm).5.0.5 3.0.0 5.5.0 7.0.0.0 7 7 7 3 3 3 3 3 3 3 3 3 7 7. 3.7 3.3. 7.. 5. 7.0 9. 7.0.0 ONG ARM (METRIC) 30A 305A 30A 307A 30A 3A 3A 3A 3A.5mm mm.5mm 3mm mm 5mm mm mm mm (mm) 7 5 9 3 3 D(mm).5.0.5 3.0.0.0.0.0 7 7 7 3 3 3 3 3 3 3 7 7.3..7 3.5..0 5... DIN 9 DIN 9 D D

Hex Key - Open Stock Tool Storge T-HANDE BA POINT (METRIC) T-HANDE (METRIC) (mm) (mm) d(mm) d(mm) (mm) (mm) d(mm) d(mm) 35 3 37 3 3 3 33 3 3 mm.5mm 3mm mm 5mm mm 7mm mm mm 35 5 5 77 7 9 9 09 93.5 9.5 9.0.0.0 3.0 3.0 3.5 3.5.0.5 3.0.0.0 7.0.0.0.0.5 3.0.0.0 7.0.0.0 7 7 7 7.5 5. 5.5 7.0.9.3.7 3.. 3305 330 3307 330 33 33 333 33 33 mm.5mm 3mm mm 5mm mm 7mm mm mm 3 5 5 77 7 9 9 09 93.5 9.5 9.0.0.0 3.0 3.0 3.5 3.5.0.5 3.0.0.0 7.0.0.0.0.5 3.0.0.0 7.0.0.0 7 7 7 7.5 5. 5.5 7.0.9.9.7 3..5 d d d d Ergonomic non-slip grip delivers superior strength nd ultimte comfort in use Ergonomic non-slip grip delivers superior strength nd ultimte comfort in use HEX KEY (METRIC) ONG TORX WRENCH (TAMPER-PROOF) (mm) D(mm) (mm) Ø(mm) 3 30 33 35 3 mm mm 7mm 9mm mm 9 7 9 7 9-7 9. 9. 5..0.5 3 5 7 9 5 5 5 53 T T7 T T9 T T5 T0 T5 T7 T30 T0 T5 T 70 7 7 90 95 0 5 33 5 7 9 0 9 3 7 7 7 7 7 7 7 7 7 7 7 7 7 3 3 3 3 3.7.9 5..5..3.9.9.3.9.3..5 D ø 3

Tool Storge Tool Storge 7 DRAWER TOO TROEY D(mm) PVC hndle for comfortble grip TOO CHEST D(mm) TOO CHEST D(mm) 957 70 (fter ssembled) 5 73 D(mm) 5 995 7.5 95 " 30 5.5 95 953A 7" 0" 77 3.3.3 Screwdriver comprtment for esy nd convenience storge High durbility roller trck enble smooth sliding Ech drwer cpcity should not exceed 35kg Totl trolley cpcity should not exceed 0kg.mm thickness steel body for strong nd lsting usge Two swivel (with stopper) nd two fixed csters with pin rolling berings Mde of glvnized steel, phosphte for rust-resistnt 0.mm thickness steel body for strong nd lsting usge Strong comfort hndle Mde of glvnized steel, phosphte for rust-resistnt 0.mm thickness steel body for strong nd lsting usge Strong comfort hndle DRAWER TOO TROEY D(mm) PVC hndle for comfortble grip 5 CANTIEVER TOO CHEST D(mm) 3 DRAWER TOO CHEST D(mm) 959 570. 95A 30 00 00. 955 70 35 5 7.9 (fter ssembled) 3 D(mm) 5 3 High durbility roller trck enble smooth sliding Ech drwer cpcity should not exceed 35kg Totl trolley cpcity should not exceed 0kg.mm thickness steel body for strong nd lsting usge Two swivel (with stopper) nd two fixed csters with pin rolling berings Mde of glvnized steel, phosphte for rust-resistnt 0.5mm thickness steel body for strong nd lsting usge Strong comfort hndle High durbility roller trck enble smooth sliding ocking system 0.mm thickness steel body for strong nd lsting usge 5

Tool Storge Tool Storge DRAWER TOO CHEST UTIITY TROEY DRAWER TOO TROEY DRAWER TOO TROEY 95 0 D(mm) 305 30. 95A 70 D(mm) 30 3.0 95 90 D(mm) 570 D(mm) 959 90 30 7.0 (fter ssembled) 5 D(mm) 0 (fter ssembled) 33 D(mm) 90 (fter ssembled) 90 D(mm) 535 3 High durbility roller trck enble smooth sliding ocking system 0.mm thickness steel body for strong nd lsting usge Compct size for multiple usges Top try for esy tools plcement while work-in-progress Bottom try cter for big size tools which cn t fit into drwers Ech drwer cpcity should not exceed 35kg Totl trolley cpcity should not exceed kg Screwdriver comprtment for esy nd convenience storge Two swivel (with stopper) nd two fixed csters with pin rolling berings Flip open top provides greter ccessibility to tools Foldble side tble is convenient nd sves spce High durbility roller trck enble smooth sliding Ech drwer cpcity should not exceed 35kg Totl trolley cpcity should not exceed kg PVC hndle for comfortble grip Two swivel (with stopper) nd two fixed csters with pin rolling berings Flip open top provides greter ccessibility to tools Foldble side tble is convenient nd sves spce High durbility roller trck enble smooth sliding protective covered legs prevent dmge ginst knocks Ech drwer cpcity should not exceed 5kg Totl trolley cpcity should not exceed 0kg MINI TOO TROEY ROING TOO TROEY AUMINUM TOO BOX PASTIC TOO BOX D(mm) D(mm) D(mm) D(mm) 95 7 0 990 0.0 953 70 3 030 " 5 305 5 5. 95 5" 35 0. (fter ssembled) 35 D(mm) 390 00 (fter ssembled) 75 D(mm) 0 5 See-through net structure on side pnels Shuttle door for esy open / close Open top try for esy tools plcement Totl trolley cpcity should not exceed 0kg Two swivel (with stopper) nd two fixed csters with pin rolling berings High durbility roller trck enble smooth sliding Not covered under ifetime Wrrnty. Not covered under ifetime Wrrnty. Not covered under ifetime Wrrnty. 7

Tool Storge Tool Storge - Try Set PASTIC TOO BOX PASTIC TOO BOX D(mm) D(mm) 95 " 00 5 03.0 953 " 3. Not covered under ifetime Wrrnty. Not covered under ifetime Wrrnty. Usge: For dily usge to orgnize your tools systemticlly, voiding misplce nd shortges PASTIC TOO BOX 95 " 530 D(mm) 53 0 PASTIC CANTIEVER TOO BOX D(mm) 5. 95 7" 0 30 3. Advntges: Net nd presentble imge Instnt vilbility check Avoid / reduce tools replcement rte due to misplce Try sets vilble to meet your different needs Not covered under ifetime Wrrnty. Not covered under ifetime Wrrnty. 9

Tool Storge - Try Set Tool Storge - Try Set PC. /"DR. SOCKET SET (METRIC) 33PC. 3/"DR. SOCKET SET (METRIC) PC. DOUBE BOX END WRENCH SET (METRIC) 30PC. COMBINATION WRENCH AND HEX KEY SET (METRIC) (mm) (mm) (mm) (mm) 0990 375 5.9 0990 375 5.9 09905 375 5.0 0990 375 5.3 - Pt. Metric Sockets 3.5,,.5, 5, 5.5,, 7,, 9,,,, 3, mm - Pt. Metric Deep Sockets,.5, 5, 5.5,, 7,, 9,,,, 3mm 3 - Bit Sockets Slotted, 5.5,.5 mm Phillips #, #, #3 Pozidriv #, #, #3 Torx T, T, T5, T0, T5, T7, T30, T0 Hex 3,, 5,, 7, mm - 5 Bits Phillips #0, #, #, #3 Slotted 3,, 5, mm 9 - Accessories Quick-Relese Rtchet Spinner Hndle Wobble Extension Brs ", " Flex Shft Sliding T-Br Universl Joint Mgnetic Quick-Relese Bit Holder Bit Adpter 5 - Pt. Metric Sockets, 9,,,, 3,, 5,, 7,, 9,,, mm - Pt. Metric Deep Sockets,,, 3,, 5, 7,9mm 3 - Sprk Plug Sockets,, mm 7 - Accessories Quick-Relese Rtchet Wobble Extension Br " 3/"F x /"M Adpter Universl Joint Bit Adpter ocking Extension Br 3" /"F x 3/"M 3-Wy Adpter x7, x, x, x3, x, x7, 7x9, 9x, x3, x7mm - Combintion Wrenches, 9,,,, 3,, 5,, 7,, 9mm 9 - Extr ong Bll Point Hex Key Set.5,,.5, 3,, 5,,, mm 9 - ong Arm Temper-Proof Torx Key Set T, T5, T0, T5, T7, T30, T0, T5, T 7PC. /"DR. SOCKET SET (METRIC) PC. WRENCH SET (METRIC) PC. COMBINATION WRENCH SET (METRIC) 5PC. ADJUSTABE WRENCH AND PIERS SET (mm) (mm) (mm) (mm) 09903 375 5.0 0990 375 5.5 09907 375 5. 09909 375 5.5 7 - Pt. Metric Sockets,,, 3,, 5,, 7,, 9,,,, 7, 30, 3, 3mm 5 - Pt. Metric Deep sockets, 3, 7, 9, mm 5 - Accessories Quick-Relese Rtchet Wobble Extension Br " Universl Joint ocking Extension Br 5" 3/"F x /"M 3-Wy Adpter - Double Rtcheting Combintion Wrenches 3, mm - Double Open End Wrenches x7, x, x, x3, x, x, x7, 30x3mm 5.5,, 7, 0,,, 3, mm - Adjustble Wrenches ", " - ong Nose Pliers " - Curved Jw ocking Pliers 7" - ong Nose ocking Pliers " 30 3

Tool Storge - Try Set Tool Storge - Try Set PC. FIE SET PC. SNAP RING PIERS SET 3PC. 3/" & /"DR. IMPACT SOCKET SET (METRIC) PC. /"DR. SOCKET SET (METRIC) (mm) (mm) (mm) (mm) 099 375 5.3 099 375 5 5.3 099 375 5 7.3 0995 375 5 5.5 - Flt File " - Hlf-Round File " - Squre File " - Round File " - Three Squre File " 3-3 x mm Needle Files - Flt, Hlf Round, Round - Externl Stright 7" - Externl Curved 7" - Internl Stright 7" - Internl Curved 7" - /"Dr. Metric Impct Sockets,,, 3,, 5,, 7,, 9,,,, 7, 30, 3 mm 3-3/"Dr. Metric Impct Sockets 7,, 9,,,, 3,, 5,, 7,, 9mm - 3/"Dr Impct Extension Br 3" - /"F x 3/"M Impct Adpter - /"F x 3/"M Impct Adpter - /"Dr. Impct Extension Br " - 3/"F x /"M Impct Adpter - 3/"F x /"M Impct Adpter - /"Dr. Impct Universl Joint 0 - Pt. Metric Sockets, 9,,,, 3,, 5,, 7,, 9, 0,,, 3,, 7, 30, 3mm 5 - Pt. Metric Deep Sockets, 7, 9,, mm - Quick-Relese Rtchet Not covered under ifetime Wrrnty. PC. PIERS SET 3PC. SCREWDRIVER SET 9PC. TOO STORAGE AND TRAY SET (mm) (mm) (mm) 099 375 5. 0993 375 5 5. 099 0 5 0 7.5 - ong Nose " - Digonl " - inesmn " - Plstic Cutting " - Precision Slotted.0x0mm,.0x0mm,.x0mm, 3.0x0mm - Precision Phillips #3x0mm, #0x0mm 3 - T-Series Slotted 3x75mm, 5x75mm, x0mm - T-Series Phillips #0x75mm, #x75mm, #x0mm, #3xmm 957-7 Drwer Tool Trolley 09903 - Try Set 7pc /"Dr. Socket (Metric) 0990 - Try Set 30pc Combintion Wrench & Hex Key 099 - Try Set pc Snp Ring Pliers 099 - Try Set pc Pliers 0993 - Try Set 3pc Screwdriver 0995 - Try Set 9pc Double Rtcheting Combintion Wrench Try set nd tool trolley re pcked seprtely 3 33

Tool Storge - Try Set Tool Storge - Try Set PC. TOO STORAGE AND TRAY SET 59PC. /"DR. SOCKET SET (S.A.E.) 9PC. 3/"DR. SOCKET SET (S.A.E.) (mm) (mm) (mm) 0997 0 5 0 7.5 0999 375 5.5 0990 375 5. 957-7 Drwer Tool Trolley 0990 - Try Set pc /"Dr. Socket (Metric) 0990 - Try Set 33pc 3/"Dr. Socket (Metric) 09903 - Try Set 7pc /"Dr. Socket (Metric) 09905 - Try Set pc Double Box End Wrench (Metric) 0990 - Try Set 30pc Combintion Wrench & Hex Key 09909 - Try Set 5pc Adjustble Wrench nd Pliers 099 - Try Set pc File 0993 - Try Set 3pc Screwdriver 0995 - Try Set 9pc Double Rtcheting Combintion Wrench - Pt. S.A.E. Sockets 5/3, 3/, 7/3, /, 9/3, 5/, /3, 3/, 7/, /" 9 - Pt. S.A.E. Deep Sockets 3/, 7/3, /, 9/3, 5/, /3, 3/, 7/, /" 3 - Bit Sockets Slotted, 5.5,.5 mm Phillips #, #, #3 Hex 3,, 5,, 7, mm Pozidriv #, #, #3 Torx T, T, T5, T0, T5, T7, T30, T0-5 Bits Slotted 3,, 5, mm Phillips #0, #, #, #3 9 - Accessories Quick-Relese Rtchet Spinner Hndle Wobble Extension Brs ", " Flex Extension Br Sliding T-Br Universl Joint Mgnetic Quick-Relese Bit Holder Bit Adpter - Pt. S.A.E. Sockets /, 5/, 3/, 7/, /, 9/, 5/, /, 3/, 3/, 7/" 9 - Pt. S.A.E. Deep Sockets 3/, 7/, /, 9/, 5/, /, 3/, 3/, 7/" - Sprk Plug Sockets 5/, 3/" 7 - Accessories Quick-Relese Rtchet Wobble Extension Br " ocking Extension Br 3" Universl Joint 3/"F x /"M Adpter Bit Adpter /"F x 3/"M 3-Wy Adpter Try set nd tool trolley re pcked seprtely PC. TOO STORAGE AND TRAY SET 5PC. /"DR. SOCKET SET (S.A.E.) 7PC. COMBINATION WRENCH AND HEX KEY SET (mm) (mm) (mm) 099 0 5 0 7.5 099 375 5 7. 099 375 5.0 957-7 Drwer Tool Trolley 0990 - Try Set pc /"Dr. Socket (Metric) 0990 - Try Set 33pc 3/"Dr. Socket (Metric) 0990 - Try Set pc Wrench (Metric) 09905 - Try Set pc Double Box End Wrench (Metric) 0990 - Try Set 30pc Combintion Wrench & Hex Key 09909 - Try Set 5pc Adjustble Wrench And Pliers 099 - Try Set pc File 099 - Try Set pc Snp Ring Pliers 099 - Try Set pc Pliers 0993 - Try Set 3pc Screwdriver 099 - Try Set 3pc 3/"Dr. + /"Dr. Impct Socket 0995 - Try Set pc /"Dr. Socket (Metric) 5 - Pt. S.A.E. Sockets 5/, 3/, 7/, /, 9/, 5/, /, 3/, 3/, 7/, 5/,, -/, -/, -/" 5 - Pt. S.A.E. Deep Sockets /, 9/, 5/, 3/, 3/" 5 - Accessories Quick-Relese Rtchet Wobble Extension Br " ocking Extension Br 5" Universl Joint 3/"F x /"M 3-Wy Adpter 9 - S.A.E. Combintion Wrenches /, 5/, 3/, 7/, /, 9/, 5/, /, 3/" 9 - Extr ong Bll Point Hex Key Set.5,,.5, 3,, 5,,, mm 9 - ong Arm Tmper-Proof Torx Key Set T, T5, T0, T5, T7, T30, T0, T5, T Try set nd tool trolley re pcked seprtely 3 35

Tool Storge - Try Set Punch & Hmmer PC. DOUBE RATCHETING COMBINATION WRENCH SET (S.A.E.) PC. /"DR. SOCKET SET (S.A.E.) (mm) (mm) 0993 375 5.5 099 375 5 - S.A.E. Double Rtcheting Combintion Wrenches 5/, 3/, 7/, /, 9/, 5/, /, 3/, 3/, 7/" - /"Dr. x mm Quick-Relese Adpter - 3/"Dr. x 3mm Quick-Relese Adpter - /"Dr. x 9mm Quick-Relese Adpter - /"Dr. x mm Bit Adpter 5 - Pt. S.A.E. Sockets 5/, 3/, 7/, /, 9/, 5/, /, 3/, 3/, 7/, 5/,, -/, -/, -/" 5 - Pt. S.A.E. Deep Sockets /, 9/, 5/, 3/, 3/" - Quick-Relese Rtchet 9PC. DOUBE RATCHETING COMBINATION WRENCH SET (METRIC) PC. TOO SET (mm) (mm) 0995 375 5 9. 0993 375 5 0.0 5 - Double Rtcheting Combintion Wrenches 5.5,, 7,, 9,,,, 3,, 5,, 7,, 9mm - /"Dr. x mm Quick Relese Adpter - 3/"Dr. x 3mm Quick Relese Adpter - /"Dr. x 9mm Quick Relese Adpter - /"Dr. x mm Bit Adpter - 5 Piece Punch Set - 3 Piece Feeler Guges Set - Bll Pein - Wood Hndle 0G / oz - Finishing - Wood Hndle 35mm 3 37

Punch - Set Punch & Hmmer 5PC. PUNCH SET PC. PIN PUNCH SET CENTER PUNCH PIN PUNCH (mm) B(mm) (mm) B(mm) 09 - Center Punch mm - Drift Punch 3mm - Pin Punch mm - Cpe Chisel 5mm - Flt Chisel mm 0 0.5 09, 3,, 5,, mm 7. 9075 907 mm 5mm.0 9.5.0 0.5 3.7 9077 9077 90753 9077 90775 9077 mm 3mm mm 5mm mm mm.0 3.0.0.0.0 9.5 9.5 9.5 9.5.0.0 00 00 300 00..0...9 3.5 Not covered under ifetime Wrrnty. Not covered under ifetime Wrrnty. COD CHISE COD CHISE Complies to USA ASME sfety requirement Chisel ASME B7.7M-99 Punch ASME B7.M-99 Mde of 0CR-V steel to provide mximum strength nd durbility Chromte tretment is resistnt to rust Complies to USA ASME sfety requirement Punch ASME B7.M-99 Mde of 0CR-V steel to provide mximum strength nd durbility Chromte tretment is resistnt to rust 907 9073 5mm mm (mm) 75.0 B(mm).0.0 0 5..5 907 9075 907 0mm mm 5mm (mm) 00 300 0 5 B(mm) 0 5..7.3 Not covered under ifetime Wrrnty. Not covered under ifetime Wrrnty. 3PC. COD CHISE SET 3PC. PUNCH SET 093 3. 09. Flt Chisels 0,, 5mm - Center Punches, 5mm - Drift Punch 3mm - Pin Punches, 3,, 5,, mm - Cpe Chisel 5mm 3 - Flt Chisels, 5, mm Not covered under ifetime Wrrnty. STANDARD BUMPING Not covered under ifetime Wrrnty. HEAVY SHRINKING Wgt(g) Overll (mm) (mm) B(mm) Wgt(g) Overll (mm) (mm) B(mm) 9 3 330 97.0 3.0 3. 9 3 330 97.0.0 3 5. Complies to USA ASME sfety requirement Chisel ASME B7.7M-99 Mde of 0CR-V steel to provide mximum strength nd durbility Powder Coting tretment is resistnt to rust Complies to USA ASME sfety requirement Chisel ASME B7.7M-99 Punch ASME B7.M-99 Mde of 0CR-V steel to provide mximum strength nd durbility Chromte tretment is resistnt to rust Not covered under ifetime Wrrnty. Not covered under ifetime Wrrnty. HICKORY wood hndle is durble nd provides comfortble grip HICKORY wood hndle is durble nd provides comfortble grip 3 39

Hmmer Hmmer CURVED PEIN & FINISHING IGHT SHRINKING BA PEIN - WOOD HANDE CAW - WOOD HANDE Wgt(g) Overll (mm) (mm) Wgt(g) Overll (mm) (mm) B(mm) Wgt(g) Overll (mm) Wgt(g) Overll (mm) 93 0 330.0 3. 9 3 330 97.0 3.0 3 5. ASME B7.5-999 93 933 93 5 / oz 0 / oz 9 / 3oz 33 35 37 5.9.3 93 933 93 370 / 3oz 5 / oz 57 / 0oz 30 330 330 3..0. HICKORY wood hndle is durble nd provides comfortble grip HICKORY wood hndle is durble nd provides comfortble grip STRAIGHT PEIN & FINISHING PICK & FINISHING Wgt(g) Overll (mm) (mm) Wgt(g) Overll (mm) (mm) 95 0 330.0 3. ASME B7.5-999 9 5 330 37 3.0 3 5. ASME B7.5-999 Hmmer hed is mde of high crbon steel to withstnd strong impct HICKORY wood hndle is durble nd provides comfortble grip Hmmer hed is mde of high crbon steel to withstnd strong impct HICKORY wood hndle is durble nd provides comfortble grip ENGINEERS - WOOD HANDE SOFT-FACE - WOOD HANDE Wgt(g) Overll (mm) Wgt(g) Overll (mm) HICKORY wood hndle is durble nd provides comfortble grip HICKORY wood hndle is durble nd provides comfortble grip 90 90 903 90 905 90 00 300 00 0 00 00 5 300 30 30 3 30 5..9.7 5.9..3 9 9 93 9 95 30 5 77 0 300 30 30 35.0.0 3 0.0 0 3 3 0.7 7.7 3..5. BA PEIN - FIBERGASS CAW - FIBERGASS Wgt(g) Overll (mm) Wgt(g) Overll (mm) 930 9303 930 5 / oz 0 / oz 9 / 3oz 335 390 390... 930 9307 5 / oz 0 / oz 330 390.3. A Hmmer hed is mde of high crbon steel to withstnd strong impct Fiberglss hndle provides comfortble grip Hmmer hed is mde of high crbon steel to withstnd strong impct Fiberglss hndle provides comfortble grip Hmmer hed is mde of high crbon steel to withstnd strong impct HICKORY wood hndle is durble nd provides comfortble grip Hmmer hed is mde of Aluminum Alloy with interchngeble soft-fce / hrd-fce hmmer tips HICKORY wood hndle is durble nd provides comfortble grip Plstic hmmer hed is not covered under ifetime Wrrnty.

Hmmer Auto Specilty Tool SOFT-FACE HAMMER TIP 95 95 953 95 955 Outside Dimeter mm mm 35mm 5mm 0mm 0 0 5. 7.3 9... HARD-FACE HAMMER TIP 953 953 9533 953 9535 Outside Dimeter mm mm 35mm 5mm 0mm 30 0 0 5. 7. 9..7. Tools tht hve been specilly designed to your gretest conveniences Simplify your job Esy to use Relible nd Sfe to use Specilly designed wrench removes nd instlls hrd-to-rech oil filters. Not covered under ifetime Wrrnty. DEAD BOW HAMMER (RUBBER) Wgt(g) 990 00 990 9903 990 0 Overll (mm) 0 3 370 3 5 3 3.3 0..0 9. Not covered under ifetime Wrrnty. Mostly used in mesuring the clernce between two prts. A Two-wy ction instlls or removes filters. Industril SB rubber bsorbs impct, resistnt to oil nd provides non-slip, comfortble grip Soft fce hmmer does not mr surfce/equipments or cuse sprks Approprite for fire prevention environment Hmmer hed consists of bll-berings for impct bsorbing Not covered under ifetime Wrrnty. 3

Auto Specilty Tool Auto Specilty Tool PC. AUTO BODY REPAIR KIT PC. FEEER GAUGES SET 3PC. FEEER GAUGES SET PC. END CAP OI FITER WRENCH SET 095.0 090. 0907 0.7 09703 9. - Anvil Dolly - Curved Dolly - Pry & Bumping Spoon - Toe Dolly - ight Shrinking Hmmer - Pick & Finishing Hmmer 0.05, 0., 0.5, 0.0, 0.5, 0.30, 0.0, 0., 0.0, 0.70, 0.0, 0.90,.00mm 0.0, 0.03, 0.0, 0.05, 0.0, 0.07, 0.0, 0.09, 0., 0.3, 0.5, 0., 0.0, 0.3, 0.5, 0., 0.30, 0.33, 0.3, 0.0, 0.5, 0., 0.55, 0.0, 0.3, 0.5, 0.70, 0.75, 0.0, 0.5, 0.90,.00mm - 3/"Dr. End Cp Oil Filter Wrenches 5, 7, 7, 0, 90, 93mm - 3/"Dr. Quick-Relese Rtchet - /"F x 3/"M Adpter Blde is mde of 5#Mn polished steel Blde length 3" Conform to DIN75 & JIS B 75-99 stndrd Blde is mde of 5#Mn polished steel Blde length 3.5" Conform to DIN75 & JIS B 75-99 stndrd Not covered under ifetime Wrrnty. Not covered under ifetime Wrrnty. Specilly designed wrench removes nd instlls hrd-to-rech oil filters. Cution: Do not use with power tools. PC. FEEER GAUGES SET 3PC. FEEER GAUGES SET PC. AUTO REPAIR MASTER TOO SET 090 7. 0905. 09 9. 0.05, 0., 0.5, 0.0, 0.5, 0.30, 0.35, 0.0, 0., 0.55, 0.0, 0.70, 0.75, 0.0, 0.90,.00mm Blde is mde of 5#Mn polished steel Blde length 3" Conform to DIN75 & JIS B 75-99 stndrd 0.0, 0.03, 0.0, 0.05, 0., 0.5, 0.0, 0.5, 0.30, 0.35, 0.0, 0.5, 0., 0.55, 0.0, 0.5, 0.70, 0.75, 0.0, 0.5, 0.90, 0.95,.00mm Blde is mde of 5#Mn polished steel Blde length " Conform to DIN75 & JIS B 75-99 stndrd - /"Dr. pt. Metric Sockets,,, 7,, 9, 0,,,, 7mm - /"Dr. Bit Socket Hex 7mm - /"Dr. 0 Bit Socket Hex 7mm 9 - /"Dr. Extr ong Bit Sockets Hex x70, x, x, 5x, x, xmm Triple Squre Mx0, Mx, Mxmm 9 - Extr ong Arm Bll Point Hex Key Set.5,,.5, 3,, 5,,, mm - /"Dr. Sprk Plug Sockets, mm - T-Series Go-Through Screwdrivers Slotted x0mm Phillips #x0mm 5 - Accessories /"Dr. Quick-Relese Rtchet /"Dr. Sliding T-Br /"Dr. Wobble Extension Brs 5", " /"Dr. Universl Joint /"Dr. Offset Hndle 0mm 3/"Dr. Two Wy Oil Filter Wrench with Adpter Rised Pnel Combintion Wrenches,, 3, 7, 9, mm Front Shock Absorption Instll Tool Shock Absorption Instll Socket Not covered under ifetime Wrrnty. Not covered under ifetime Wrrnty. 5

Auto Specilty Tool Auto Specilty Tool 5PC. AUTO REPAIR MASTER TOO SET 5PC. HOOK AND PICK SET CROSS WRENCH 099 0. 09709 0 00.0 7, 9, mm, /" 7.0 5-3/"Dr. pt. Metric Sockets 7,,,,, 3,, 5,, 7,, 9,,, mm 5 - /" Shnk 5 Bits Slotted, 5,.5mm Phillips #, #3 Hex 3,, 5, mm Tmper Torx T, T5, T0, T5, T30, T0-3/"Dr. Sprk Plug Sockets, mm - T-Series Go-Through Screwdrivers Slotted x0mm Phillips #x0mm - Accessories /"Dr. Spinner Hndle /"Dr. Adpter /"Dr. x /"Shnk Bit Coupler 3/"Dr. Quick-Relese Rtchet 3/"Dr. Wobble Extension Brs 3", " 3/"Dr. Universl Joint 3/"Dr. Adpter /"Dr. 3-Wy Adpter Combintion Wrenches,,, 3,, 5,, 7,, 9, mm ong Nose Pliers " Slip Joint Pliers " Includes piece of Mgnetic extr long hndle Het-treted to improve durbility It s convenient to work on O-rings, sels nd spilt pins etc DIGITA CIRCUIT TESTER 0 0 9. Mde of CR-V steel Not covered under ifetime Wrrnty. JAW GEAR PUERS 903 90 90 90 3" " " " (mm) 5 55 0 35 D(mm) 7 0 0.0 70~95.0 ~ 00.0 75~35 5. 0.9.5 9.0 5PC. EXTRACTOR SET 0970, 3,,.5, 7mm 5PC. EXTRACTOR SET 0.3 0970A 7 3.3, 5.3,.,.,.mm. No bttery required CD Digitl disply Induction test for esy brek-point test, microwve rdition nd lekge conditions Direct or in-direct mesure for, 3, 55, nd 0 Voltge (AC & DC) Do not test on 30 Voltge electric sources Do not use s norml screwdrivers Not covered under ifetime Wrrnty. The shft tip hs gone through specil het tretment to increse durbility Slip-resistnt jws design D H 3 JAW GEAR PUERS UNIVERSA BA JOINT PUER (mm) D(mm) 9033 903 903 903 3" " " " 5 55 0 35 7 0.0.0 00.0 0 70~95 ~ 75~35 5.3 9..0 3.9 905 9.0 Tpered extrctors for broken screws nd studs Mde from hrdened nd tempered steel (Cr-Mo) For removing screws nd studs tht cnnot be held firmly Not covered under ifetime Wrrnty. Mde of GCr5 bering steel with HRC5-0 For removing screws nd studs tht cnnot be held firmly Not covered under ifetime Wrrnty. The shft tip hs gone through specil het tretment to increse durbility Slip-resistnt jws design D H For seprting bll joints Mde of CR-V steel with specil het tretment 7

Auto Specilty Tool Auto Specilty Tool UNIVERSA BA JOINT PUER ANVI DOY GASKET SCRAPER GREASE COUPER 90 90..0 903 7.0 975 7.0 97 7 3. For seprting bll joints High qulity screws to ensure mximum Torque Mde of CR-V steel with specil het tretment Slip-resistnt jws design Mde of high crbon steel by forging nd tempering, boosting strength nd durbility Not covered under ifetime Wrrnty. Nozzle with bll-bering ensures no reverse flow Works with hydrulic-type grese fittings Not covered under ifetime Wrrnty. CURVED DOY TOE DOY HIGH PRESSURE FEXIBE NYON HOSE 3/"DR. END CAP OI FITER WRENCH Flute 905 0.5 907.0 97 973 300mm mm 9 9 7 7 7. 9.5 970 9703 970 9705 970 9707 5mm 7mm 7mm 0mm 90mm 93mm 5 5 5 5 7 7 7 7 7 7.5..3.5 3.5.3 Hevy-duty flexible nylon hose Mde of high crbon steel by forging nd tempering, boosting strength nd durbility Mde of high crbon steel by forging nd tempering, boosting strength nd durbility Not covered under ifetime Wrrnty. Specil design with Chromte tretment PRY AND BUMPING SPOON SCRAPER WITH WOOD HANDE TWO WAY OI FITER WRENCH OI FITER PIERS 909 7.0 9 7. 97 3-mm 9. 97 " 3 7.5 Hevy Duty edge Mde of high crbon steel by forging nd tempering, boosting strength nd durbility Not covered under ifetime Wrrnty. Two-wy ction instlls or removes filters Works with /" nd 3/" drive tools For removing 3.5-mm oil filters Two clmp hndle llows lrger clmping power Plstic wrpped hndle provides comfortble grip 9

Auto Specilty Tool Auto Specilty Tool /"DR. STRAP OI FITER WRENCH PISTON RING COMPRESSORS SCISSOR JACK ROTATING HANDE HYDRAUIC FOOR JACK Mxi od Mxi od 97 " 7.5 97 97 3" " 30 3 0 0.5 0.5 973.5T 33.0 97 97 T 3T. 7.9 It cn work with /" drive tools nd 3/" spinner hndles. It cn demount oil filters with dimeter below mm The strong nd durble nylon belt cn work in confined spce Positive lock ction provides positive compression nd fingertip relese Hevy spring steel compresses the stiffest rings evenly Tool is beded long lower edge to prevent compressor from entering the cylinder Working rnge: 97 : 53-75MM 97 : 0-75MM Not covered under ifetime Wrrnty. VAVE SEA RING PIERS 975 0.0 EECTRICA WIRE STRIPPER AND CRIMPER 975 7.5 ifting rnge 95-3mm Supplied complete with crnking hndle Not covered under ifetime Wrrnty. Designed for use in hevy duty truck, hevy construction nd griculturl equipment mintennce grges Chromed rm nd dust sels on floor jck prevent hydrulic contmintion Sfety by-pss nd overlod systems protect hydrulic block Additionl foot pedl pumping provides fst sddle rising to the lod Spring loded "T" hndle on floor jck cn be ctivted to lower lod in ny hndle position by pulling nd rotting it clockwise / turn High crbon steel chssis provides mximum strength in lightweight floor jck design Not covered under ifetime Wrrnty. HYDRAUIC BOTTE JACK ONG RAM JACK-PORTABE HYDRAUIC EQUIPMENT KIT For mounting nd dismounting vlve sels nd springs DROP FORGED COI SPRING COMPRESSORS Multi-purpose usge: Clmp Insulted crimping pliers Wire stripper(0.75-mm) Non-insulted crimping pliers Cble cutter 7-MM Auto crimping pliers Bolt cutter M.-M5 979 979 9793 979 9795 979 9797 979 Mxi od T 3T 5T T T 0T 30T T.0 0.. 5. 7. 0. 0.7 30.7 9799 Mxi od T 9.0 9770 9770 70mm 370mm 5. 7. Mde of qulity crbon steel Works with ½ drive tools or mm sockets nd wrenches Suitble for use where spce under wheel rch is limited Specil reinforced screw thred design to ensure sfety All steel construction Designed for use in utomotive, industril, construction or griculturl jobs for lifting, pushing, bending nd strightening Adjustble top screw Fewer working prts, extremely smooth bering surfces, nd close tolernces ensure trouble-free service nd long life. Screw djustble pd Jcks cn be used in verticl nd horizontl positions Not covered under ifetime Wrrnty. Esy to mintin, esy to clen remote control jcks deliver power where you need it, especilly in hrd to rech plces on utomotive frmes nd bodies They include pump, rm, nd connecting hose with quick couple for fst esy detchment Not covered under ifetime Wrrnty. 5

Other Accessories Other Accessories 5PC. TOO SET PC. AUTO TOO SET 53PC. PROFESSIONA EECTRONIC TOO SET 000 3. 00. 09535 9.0 3 - A-Series Screwdrivers Slotted 5x0mm Phillips #x0mm Circuit Tester 5mm - Accessories Adjustble Wrench / Dipping Grip " ong Nose Pliers " inesmn Pliers " Insulted Tpe Fine Point Tweezer Tpe Mesure 3mxmm Utility Knife Scissors Aluminum Flshlight 5# Mini Hcksw Clw Hmmer W/ Wood Hndle Oz Plstic Box - /"Dr. Type Extendble Socket Wrench - /"Dr. Double-end Sockets 7x9, x3mm - inesmn Pliers 7" - ong Nose Pliers " - Adjustble Wrench " - A-Series Screwdriver Slotted x0mm - A-Series Screwdriver Phillips #x0mm - Tpe Mesure 3mxmm - Utility Knife x0mm - ED Flshlight - /"Dr. pt. Metric Sockets, 5, 5.5,, 7,, 9,,,, 3mm 5 - /" Shnk 5 Bits Slotted, 5.5,.5mm Phillips #, #, #3 Torx T, T5, T0 Hex,.5, 3,, 5, mm - A-Series Screwdrivers Philips #x75mm, #x0mm Slotted 5x75mm, x0mm - Precision Combintion Screwdrivers Philips #0x75mm, #0x0mm, #xmm Slotted x75mm, 3x0mm, xmm 7 - Accessories /"Dr. Bit Adpter 5mm Bit Screwdriver With Mgnet Circuit Tester ong Nose Pliers " Digonl Pliers " Electricin's Knife ong ife Soldering Iron 30w Mini Stnd For Soldering Iron Anti-sttic Brush Digitl Multi-meter Solder Absorber Insulted Tpe Adjustble Wrench " Solder Wire.0mm / 7g Aluminum Flshlight Self Adjusting Cutter Stripper -/" Tpe Mesure 3mx3mm PC. MOTOR CYCE REPAIR TOO SET CIRCUIT TESTER AUTO VOTAGE TESTER 095 9 - Combintion Wrenches,, 3,, 5,, 7,, 9mm 3 - Double Box End Wrenches x, x7, 9xmm - A-Series Screwdrivers Philips #x3mm, #xmm Slotted x3mm, xmm 3.3 5mm 90mm 0 7.7 3. 3 V-V-V 3. Mesure rnge 0VAC Do not use s norml screwdrivers Not covered under ifetime Wrrnty. Specilly designed for vehicles low voltge circuits Not covered under ifetime Wrrnty. 5 53

Other Accessories Other Accessories / Disply Unit MECHANICS BENCH VISE TAPE MEASURE BI-META SAW BADES HAWK SAW FRAME W/CARBON STEE BADE Opening(mm) Cpcity(kg) 70 70 703 705 " 5" " " 33 5 03 700 0 3000 000.0.0 9.0 0.0 93 93 933 3.5mxmm 5mx9mm 7.5mx5mm 7 7.5 7.0.5 9307 " 0 00 9. 930 " 3 3. teeth Excellent elsticity, strong teeth, smooth cutting nd outstnding toughness Approprite for cutting tough nd hrdly divisible steel, non-ferrous metls nd plstics Not covered under ifetime Wrrnty. Adjustble, with interchngeble or bldes Not covered under ifetime Wrrnty. SATA DISPAY SHEF SOCKET DISPENSER D(mm) D(mm) Mde of hevy duty cst iron with electrosttic coting Metric nd S.A.E. scles Durble ABS cse, contour shpe fits comfortbly in hnd SA-STAND 0 00 300 90.0 SA-SKRACK 30 3 90.7 Not covered under ifetime Wrrnty. Not covered under ifetime Wrrnty. MINI HACK SAW HACK SAW 930 " 9305 " 7.0 ABS hndle provides comfort nd durbility One bi-metl " sw blde (#9307) included Ergonomic hndle provides extr comfort Not covered under ifetime Wrrnty. Not covered under ifetime Wrrnty. Not covered under ifetime Wrrnty. Not covered under ifetime Wrrnty. 5 55

Product Number Index Product Number Index 5 Pge Pge Pge Pge Pge Pge Pge 030 7 000 5 00 5 0005 000 0007A 0009 7 00 7 00 70 00 70 003 7 005 00 00 009 003 9 0900 0900 09003 0900 09005 3 0900 09007 0900 55 09009 55 090 7 090 9 090 73 0903 9 090 30 0905 3 090 0907 090 0909 5 0900 5 090 5 090 5 090 0905 090 7 0907 9 090 7 0909 73 0903 7 0903 7 09033 73 0903 9 09037 73 0903 3 090 7 0905 7 090 70 090 0905 0905 09053 09055 0900 0900-090 0903 7 090 7 090 0907 090 7 0909 09070 0907 7 0907 70 09073 7 0907 0907 09079 0900 3 090 3 0903 090 3 0905 3 090 0907 5 090 5 09090 5 0909 09093 9 0909 09A 7 09 7 093A 7 09 7 095A 09 097A 09 09 9 09 093 09 9 093 9 093 9 0933 9 093 9 095 09 3 09 3 093 3 09 3 0903 5 090 0905 090 095 0930A 09303E 0930E 09305 0930 7 09307 7 0930 7 09309 7 093 093 0933 093 0935 9 093 9 0937 9 093 093 093 9 093 0933 090 090 0905 0907 5 09 09 7 09 7 09 7 09 5 099 095 3 095 3 095 0959 30 095 0953 3 0955 0953 3 09535 53 0970 9 0970 9 09703 5 0970 0970A 09709 7 0990 30 0990 30 09903 30 0990 30 09905 3 0990 3 09907 3 09909 3 099 3 099 3 099 3 0993 3 099 33 0995 33 099 33 0997 3 099 3 0999 35 0990 35 099 35 099 35 0993 3 099 3 0995 3 0993 3 3 3 3 3 3 5 3 3 7 3 3 9 3 3 3 3 3 3 3 5 3 3 7 3 3 9 3 30 3 30 3 303 3 30 3 305 3 30 3 307 3 30 3 309 3 3 3 3 3 3 3 33 3 3 3 33 33 3 33 33 5 33 33 7 33 33 9 33 33 90 33 903 35 90 35 905 33 90 33 909 3 9 3 9 3 9 3 93 3 9 35 9 35 9 3 970 33 35 35 3 35 35 5 35 35 7 35 35 9 35 35 35 3 3 3 3 3 5 3 3 7 3 3 9 3 30 3 30 3 303 3 30 3 305 3 30 3 307 3 30 3 309 3 3 3 3 3 3 3 33 3 3 3 35 3 3 3 37 3 3 3 37 37 3 37 37 5 37 37 7 37 37 9 37 37 37 37 3 37 37 5 37 70 37 70 37 703 37 70 37 705 37 70 37 707 37 70 37 709 37 7 37 7 37 7 37 90 3 903 3 90 3 905 3 90 39 907 39 90 39 909 39 9 39 9 39 9 39 93 39 9 39 95 0 9 0 97 0 99 0 90 0 9 0 930 0 90 3 970 3 97 3 97 3 3 0 3 0 33 0 3 0 35 0 3 0 37 0 3 0 39 0 3 0 3 0 3 0 33 0 3 0 35 0 30 30 303 30 305 30 307 30 309 3 3 3 33 3 330 330 3303 330 3305 330 3307 330 3309 33 33 33 333 33 335 33 337 33 339 330 33 30 30 303 30 305 30 307 30 309 3 3 3 33 3 35 3 37 3 3 33 3 35 3 37 3 39 35 35 35 353 35 355 30 3 30 3 303 3 30 3 305 3 30 3 307 3 30 3 309 3 3 3 Pge Pge Pge Pge Pge Pge Pge 3 3 3 3 33 3 3 3 35 3 3 3 37 3 3 3 39 3 30 3 370 3 370 3 3703 3 370 3 3705 3 370 3 3707 3 370 3 390 390 3905 390 5 3907 5 390 5 3909 5 39 5 39 5 39 5 393 5 39 5 395 39 397 39 399 3930 39 5 395 5 390 3970 397 397 7 7 3 7 7 5 7 7 7 7 7 9 7 5 7 5 7 5 7 53 7 5 7 55 7 5 7 57 7 5 7 59 7 7 5 7 5 7 53 7 7 3 7 7 5 7 7 7 7 7 9 7 7 7 7 3 7 7 5 7 7 7 7 7 9 7 7 7 3 7 7 90 90 903 90 905 90 907 90 99 9 700 9 9 3 9 9 5 9 9 7 9 9 9 9 3 9 9 5 9 9 30 9 30 9 303 9 3 3 3 5 7 9 0 0 03 0 05 0 07 30 5 30 5 303 5 0 5 0 5 03 5 5 5 3 5 0 5 0 5 03 5 0 5 5 5 3 5 5 5 5 5 7 5 5 9 5 0 5 0 5 03 5 0 5 05 5 0 5 07 5 0 5 09 5 0 5 0 5 03 5 0 5 05 5 0 5 07 5 0 5 0 5 03 5 0 5 05 5 0 5 07 5 5 53 5 53 53 53 5 53 55 53 5 53 57 53 5 53 59 53 53 53 3 53 53 5 53 53 7 53 53 9 53 53 53 3 53 53 5 53 53 7 53 390 5 33 5 33 5 333 5 33 5 335 5 33 5 337 5 33 5 339 5 33 5 339 5 30 55 30 55 303 55 30 55 305 55 30 55 307 55 30 55 309 55 3 55 3 55 3 55 33 55 3 55 3303 57 330 57 3305 57 330 57 3307 57 330 57 3309 57 33 57 33 57 33 57 33 57 335 57 33 57 337 57 330 57 33 57 333 57 335 57 303 57 30 57 305 57 30 57 307 57 30 57 309 57 3 57 3 57 3 57 3 57 35 57 37 57 39 57 30 57 3 57 33 57 35 57 35 59 3 59 37 59 3 59 39 59 35 59 35 59 35 59 353 59 35 59 355 59 35 59 357 59 35 59 359 59 3 59 35 59 35 59 353 59 35 59 355 59 35 59 357 59 35 59 359 59 305 59 30 59 307 59 30 59 309 59 3 59 3 59 3 59 33 59 3 59 35 59 3 59 37 59 3 59 39 59 30 59 3 59 3 59 33 59 3 59 35 59 3 59 3 59 39 59 370 5 370 5 3703 5 370 5 3705 5 370 5 370 0 37 0 37 55 375 5 37 5 377 5 37 0 379 5 370 0 37 0 3 35 3 37 3 39 330 33 33 333 33 335 33 337 33 339 30 3 3 33 3 35 3 37 3 39 3 35 35 353 39 395 39 39 399 3930 393 393 3937 393 390 0 7 0 7 03 7 0 7 05 7 0 7 07 7 0 7 09 7 0 7 0 7 0 7 03 7 0 7 05 7 0 7 07 7 0 7 09 7 0 7 0 7 0 7 03 7 0 7 0 75 0 75 03 75 0 75 05 75 0 75 07 75 0 75 00 7 00 7 003 7 00 7 005 7 00 7 007 7 00 7 009 7 0 7 0 7 0 7 57

Product Number Index Product Number Index 5 Pge Pge Pge Pge Pge Pge Pge 03 7 0 7 05 7 0 7 07 7 0 7 09 7 00 7 0 7 0 7 03 7 033 7 035 7 03 7 037 7 0 7 0 7 03 7 0 7 05 7 0 7 0 7 09 7 0 7 05 7 05 7 0 75 0 75 03 75 0 75 05 75 0 75 07 75 0 75 09 75 090 75 09 75 09 75 77 77 3 77 77 5 77 77 7 77 77 77 77 3 77 77 5 77 77 7 77 77 9 77 77 77 77 3 77 77 5 77 77 7 77 77 9 77 77 77 77 3 77 5 77 77 30 77 30 77 303 77 30 77 305 77 7 7 7 5 7 7 7 7 0 7 0 7 03 7 0 7 05 7 0 7 07 7 0 7 09 7 7 7 7 3 7 7 5 7 7 7 7 7 9 7 0 7 7 7 3 7 7 5 7 33 3 35 37 3 39 3 3 33 3 35 3 37 3 39 35 35 35 30 30 303 30 305 30 307 30 309 3 3 3 33 3 35 3 37 3 39 30 30 303 5 5 3 5 5 00 5 0 5 0 5 03 5 0 5 05 5 0 5 30 5 30 5 303 5 30 5 305 5 30 5 307 5 30 5 309 5 3 5 3 5 3 5 3 5 3 5 33 5 3 5 35 5 3 5 37 5 3 5 0 0 03 0 05 0 07 0 09 3 5 7 7 73 7 75 7 77 7 79 0 0 0 03 0 05 0 07 0 09 3 5 5 7 55 7 5 7 7 7 73 7 75 7 77 7 79 0 3 0 7 0 7 03 7 0 7 05 7 0 7 07 7 0 7 09 7 7 7 7 3 7 7 5 7 7 7 7 90 7 90 7 903 7 90 7 905 7 90 7 907 7 90 7 909 7 9 7 9 7 9 7 93 7 70 0 70 0 703 0 70 0 705 0 70 0 707 0 70 0 7 0 7 0 73 0 7 0 75 0 7 0 7305 730 7309 73 73 737 739 73 703 79 7 7 73 7 75 7 70 70 703 70 705 70 770 770 7703 770 7705 770 7707 77 77 7 00 0 0 03 0 30 30 303 90 90 903 90 905 90 9 0 03 3 5 7 3 5 3 3 33 3 35 3 5 7 3 3 5 3 3 7 3 3 703 3 705 3 70 3 707 3 70 3 0 5 0 5 03 5 0 5 05 5 0 5 07 5 0 5 09 5 00 5 0 5 0 5 03 5 0 5 05 5 0 5 07 5 0 5 09 5 030 5 5 5 3 5 5 5 5 5 7 5 5 9 5 5 5 5 3 5 5 5 5 5 7 5 5 9 5 5 0 03 0 05 07 0 09 3 5 Pge Pge Pge Pge Pge Pge Pge 7 30 303 30 305 307 30 309 3 3 3 33 3 35 3 37 0 5 0 5 03 5 0 5 05 5 0 5 07 5 0 5 53 53 3 53 0 7 30 3 303 3 30 3 305 3 307 3 30 3 309 3 3 3 3 3 3 3 33 3 3 3 35 3 3 3 37 3 3 33 3 35 37 3 39 35 35 35 353 35 355 35 357 0 03 0 05 0 70A 70A 703 9 703 9 700A 700A 7003A 703 9 7033 9 7030A 7030A 70303A 7033 90 7033 90 70333 90 70 9 70 9 703 9 70 9 705 9 705 9 70A 90 70A 90 703A 90 70A 9 705A 9 70A 9 70 9 70 9 703 9 707 707 70 703 70 705 70 707 70 709 70 5 70 5 703 5 705 5 7 9 7 9 73 9 7 9 73 9 730 9 730 9 7 9 7 9 7 93 770 93 700 93 700 93 700 9 7005 9 70 9 70 9 703 9 70 9 70 9 70 9 703 9 70 9 703 95 703 95 7033 95 703 95 70 95 70 95 703 95 70 95 703A 95 730A 95 7303A 95 70A 9 7 9 7 9 73 9 73A 9 0A 05A 0A 07A 0A 0A 0A 0A 0A 030A 0305A 030A 0307A 030A 03A 03A 03A 03A A 5A A 7A A A A A 3A A A 30A 305A 30A 307A 30A 3A 3A 3A 3A 35 3 37 3 3 3 33 3 3 3305 330 3307 330 33 33 333 33 33 3 30 33 35 3 3 5 7 9 5 5 5 53 903 7 90 7 90 7 90 7 9033 7 903 7 903 7 903 7 905 7 90 90 9075 39 90753 39 907 39 9077 39 9077 39 9077 39 90775 39 9077 39 907 39 9073 39 907 39 9075 39 907 39 9 97 9 97 9 97 95 97 9 9 97 9 9 99 99 9 9 99 9 99 9 0 93 0 93 5 93 5 933 5 9 39 9 39 93 9 95 9 903 905 907 909 930 9303 930 930 9307 93 933 93 93 933 93 90 90 903 90 905 90 9 9 93 9 95 95 95 953 95 955 953 953 9533 953 9535 990 990 9903 990 93 9 93 99 933 99 93 99 9330 0 93303 0 9330 0 93305 0 9330 0 930 5 9305 5 9307 55 93 0 93 933 93 935 93 937 93 939 930 55 95 5 95 5 953A 5 95A 5 955 5 95 957 95A 959 95 953 95 7 959 7 95 7 95 953 95 95 9 9 903 9 9 9303 930 93 93 933 90 90 9 9 953 955 975 9 97 9 97 9 973 9 9730 9730 97303 9730 97305 973 973 970 9 9703 9 970 9 9705 9 970 9 9707 9 97 9 97 9 97 97 97 975 975 9770 9770 973 5 97 5 97 5 979 5 979 5 9793 5 979 5 9795 5 979 5 9797 5 979 5 9799 5 SA-SKRACK 55 SA-STAND 55 59

Product Description Index Product Description Index Description Pge Description Pge /"DR. PT. DEEP SOCKET (S.A.E.) / (METRIC) 3, 33 /"DR. PT. SOCKET (S.A.E.) / (METRIC) 3 /"DR. SPINNER HANDE 3 /"DR. WOBBE EXTENSION BAR ", " 35 /"DR. x /" SHANK BIT COUPER 35 /"DR. & 3/"DR. FEX SHAFT 35, 0 /"DR. & 3/"DR. HEX BIT SOCKET (METRIC) 9, /"DR. & 3/"DR. PHIIPS BIT SOCKET 9, 5 /"DR. & 3/"DR. POZI-DRIVE BIT SOCKET, 5 /"DR. & 3/"DR. SOTTED BIT SOCKET, 5 /"DR., 3/"DR. & /"DR. HEAVY DUTY OFFSET QUICK REEASE RATCHET 33, 3, /"DR., 3/"DR. & /"DR. QUICK-REEASE RATCHET (5S-0T) 33, 3, /"DR., 3/"DR. & /"DR. QUICK-REEASE RATCHET (ROUND HEAD) 33, 3, /"DR., 3/"DR. & /"DR. TORX BIT SOCKET 9,, 5 /"DR., 3/"DR., /"DR. & 3/"DR. ADAPTER 3, 39, 5, /"DR., 3/"DR., /"DR. & 3/"DR. FEX HANDE 3, 39, 5, /"DR., 3/"DR., /"DR. & 3/"DR. IMPACT ADAPTER 55, 5, 5, 0 /"DR., 3/"DR., /"DR. & 3/"DR. SIDING T-BAR 3, 39, 5, /"DR., 3/"DR., /"DR. & 3/"DR. UNIVERSA JOINT 3, 39, 5, 3/"DR. PT. DEEP SOCKET (S.A.E) / (METRIC) 3, 37 3/"DR. PT. IMPACT SOCKET (METRIC) 55 3/"DR. PT. SOCKET (S.A.E.) / (METRIC) 35, 3 3/"DR. x /" SHANK BIT COUPER 0 3/"DR. & /"DR. 3-WAY ADAPTER 0, 3/"DR. & /"DR. QUICK REEASE STUBBY RATCHET 3, 3/"DR. & /"DR. SPARK PUG SOCKET 0, 3/"DR., /"DR. & 3/"DR. IMPACT UNIVERSA JOINT 5, 5, 0 3/"DR. E-TORX SOCKET 37 3/"DR. END CAP OI FITER WRENCH 9 3/"DR. IMPACT EXTENSION BAR 3", " 5 3/"DR. OCKING EXTENSION BAR 3", ", " 39 3/"DR. OFFSET FEXIBE RATCHET 39 3/"DR. TORX BIT SOCKET (TAMPER-PROOF) 5 3/"DR. WOBBE EXTENSION BAR 3", ", " 3 /"DR. PT. DEEP IMPACT SOCKET (METRIC) 57 /"DR. PT. DEEP SOCKET (S.A.E.) / (METRIC), /"DR. PT. IMPACT SOCKET (S.A.E.) / (METRIC) 5, 57 /"DR. PT. SOCKET (S.A.E.) / (METRIC) 0, /"DR. PT. SOCKET (S.A.E.) / (METRIC), 3 /"DR. 0 HEX BIT SOCKET (METRIC) 53 /"DR. 0 TORX BIT SOCKET 53 /"DR. 0 TRIPE SQUARE BIT SOCKET 53 /"DR. x 5/" SHANK BIT COUPER 5 /"DR. & 3/"DR. OFFSET HANDE, /"DR. E-TORX SOCKET 3 /"DR. HEX BIT SOCKET (S.A.E.) 5 /"DR. IMPACT EXTENSION BAR 3", 5", ", ", " 5 /"DR. OCKING EXTENSION BAR 3", 5", " 5 /"DR. SPEED HANDE /"DR. STRAP OI FITER WRENCH " /"DR. TRIPE SQUARE BIT SOCKET 5 /"DR. WOBBE EXTENSION BAR 5", " 3/"DR. PT. DEEP IMPACT SOCKET (METRIC) 59 3/"DR. PT. IMPACT SOCKET (METRIC) 59 3/"DR. PT. SOCKET (S.A.E.) / (METRIC) 7 3/"DR. EXTENSION BAR ", ", " 3/"DR. IMPACT EXTENSION BAR ", " 0 3/"DR. QUICK-REEASE RATCHET(TEAR DROP) "DR. PT. DEEP IMPACT SOCKET (METRIC) "DR. PT. IMPACT SOCKET (METRIC) DRAWER TOO TROEY 7 JAW GEAR PUERS 7 PC SPARE BADE 3 DRAWER TOO CHEST 5 3 JAW GEAR PUERS 7 3 PC COD CHISE SET 3 3 PC FARE NUT WRENCH SET (S.A.E.) / (METRIC) 7 3 PC FEX HEAD SOCKET SET (METRIC) 7 3 PC SOCKET ADAPTER SET (METRIC) 3 DRAWER TOO TROEY 7 PC TORX WRENCH SET 73 5 CANTEVER TOO CHEST 5 5 PC 3/"DR. TUNE UP KET (METRIC & S.A.E.) 5 PC COMBINATION DOUBE RATCHETING WRENCH SET (METRIC) 5 PC EXTRACTOR SET 5 PC FEX RATCHETING WRENCH SET (METRIC) 3 5 PC HOOK & PICK SET 7 5 PC PUNCH SET 3 5 PC REVERSIBE RATCHETING WRENCH SET (METRIC) 5 PC SNAP RING PIER SET DRAWER TOO CHEST PC A-SERIES SCREWDRIVER SET PC AUTO BODY REPAIR KIT PC COMBINATION WRENCH SET (S.A.E.) / (METRIC) PC DOUBE BOX END WRENCH SET (METRIC) 70 PC DOUBE BOX RATCHETING WRENCH SET (METRIC) PC DOUBE OPEN END WRENCH SET (METRIC) 7 PC FEX-SOCKET WRENCH SET (METRIC) 73 PC PIN PUNCH SET 3 PC PRECISION COMBINATION SCREWDRIVER SET PC PRECISION SOTTED SCREWDRIVER SET PC PRECISION TORX SCREWDRIVER SET PC REVERSIBE RATCHETING WRENCH SET (METRIC) 3 PC T-SERIES COMBINATION SCREWDRIVER SET 7 7 DRAWER TOO TROEY 7 PC COMBINATION DOUBE RATCHETING WRENCH SET (S.A.E.) / (METRIC) 7 PC COMBINATION INSUATED SCREWDRIVER SET 7 PC COMBINATION WRENCH SET (METRIC), 9 7 PC DOUBE BOX END WRENCH SET (METRIC) 70 7 PC DOUBE OPEN END WRENCH SET (METRIC) 7 7 PC PRECISION COMBINATION SCREWDRIVER SET 7 PC PRECISION TORX SCREWDRIVER SET 9 7 PC STUBBY WRENCH SET (METRIC) 73 7 PC X OCKING FEX HEAD RATCHETING WRENCH SET (METRIC) 3 DRAWER TOO TROEY PC A-SERIES SCREWDRIVER SET 7 PC A-SERIES TORX SCREWDRIVER SET PC COMBINATION DOUBE RATCHETING WRENCH SET (METRIC) PC COMBINATION WRENCH SET (METRIC) PC DOUBE BOX END WRENCH SET (METRIC) 70 PC DOUBE OPEN END WRENCH SET (METRIC) 7 PC END CAP OI FITER WRENCH SET 5 PC FODUP HEX KEY SET (METRIC) 9 PC FODUP TORX HEX KEY SET (TAMPER-PROOF) PC ONG ARM TORX KEY SET (TAMPER-PROOF) 9 PC P-SERIES COMBINATION SCREWDRIVER SET 7 PC P-SERIES TORX SCREWDRIVER SET 7 PC X X-BEAM COMBINATION WRENCH SET (METRIC) PC X X-BEAM RATCHETING WRENCH SET (METRIC) 9 PC 3/"DR. MOTORCYCE REPAIR SET (METRIC) 3 9 PC ONG ARM BA POINT HEX KEY SET (METRIC) 9 PC COMBINATION WRENCH SET (S.A.E.) / (METRIC) 5 9 PC EXTRA ONG BA POINT HEX KEY SET (METRIC) 7 9 PC EXTRA ONG BA POINT WITH HANDE HEX KEY SET (METRIC) 9 9 PC EXTRA ONG HEX KEY SET (METRIC) 7 9 PC EXTRA ONG TORX KEY SET (TAMPER-PROOF) 9 9 PC FODUP HEX KEY SET (SAE) Description Pge Description Pge 9 PC ONG ARM BA POINT HEX KEY SET (METRIC) 9 PC ONG ARM HEX KEY SET (METRIC) 9 PC PRECISION COMBINATION SCREWDRIVER SET 9 PC A-SERIES SCREWDRIVER SET PC DOUBE BOX END WRENCH SET (METRIC) 70 PC DOUBE OPEN END WRENCH SET (METRIC) 7 PC X X-BEAM COMBINATION WRENCH SET (METRIC) PC X X-BEAM RATCHETING WRENCH SET (METRIC) PC AUTO TOO SET 5 PC COMBINATION WRENCH SET (S.A.E.) / (METRIC) 5, 7 PC DEEP OFFSET DOUBE BOX END WRENCH SET (METRIC) 9 PC DOUBE BOX END WRENCH (METRIC) 7 PC /"DR. BIT SOCKET SET (METRIC) PC /"DR. IMPACT SOCKET SET (S.A.E.) / (METRIC) 55 PC /"DR. PASS-THRU RATCHET SOCKET SET (METRIC) 9 PC COMBINATION DOUBE RATCHETING WRENCH SET (METRIC) PC COMBINATION WRENCH SET (METRIC) 7 PC EXTRA ONG BA POINT HEX KEY SET (S.A.E.) 7 PC EXTRA ONG HEX KEY SET (S.A.E.) 7 PC ONG ARM BA POINT HEX KEY SET (S.A.E.) PC ONG ARM HEX KEY SET (S.A.E.) 3 PC /"DR. SOCKET SET (METRIC) 3 PC /"DR. SOCKET SET (METRIC) 3 PC DOUBE OPEN END WRENCH SET (METRIC) 73 3 PC PUNCH SET 3 PC 3/"DR. SOCKET SET (METRIC) 3 PC COMBINATION WRENCH SET (S.A.E.) / (METRIC) 7, PC FEEER GAUGES SET 5 PC 3/"DR. SOCKET SET (METRIC) 3 5 PC PRECISION COMBINATION SCREWDRIVER SET 9 5 PC TOO SET 5 PC 3/"DR. SOCKET SET (S.A.E.) 3 PC COMBINATION WRENCH SET (S.A.E.) PC FEEER GAUGES SET PC MOTOR CYCE REPAIR TOO SET (METRIC) 5 7 PC /"DR. SOCKET SET (METRIC) 7 PC COMBINATION OFFSET BOX END WRENCH SET (METRIC) PC /"DR. SOCKET SET (METRIC) 5 PC /"DR. & /"DR. BIT SOCKET SET (METRIC) PC /"DR. & /"DR. HEX BIT SOCKET SET (METRIC) PC /"DR. & /"DR. TORX BIT SOCKET SET (METRIC) 0 PC /"DR. SOCKET SET (METRIC) / (S.A.E.) 3 0 PC /"DR. SOCKET SET (S.A.E.) 5 PC 3/"DR. PASS-THRU RATCHET SOCKET SET (METRIC & S.A.E.) 9 0 PC /"DR. SOCKET SET (S.A.E.) 5 3 PC COMBINATION WRENCH SET (METRIC) 9 3 PC FEEER GAUGES SET PC /"DR. SOCKET SET (METRIC) PC /"DR. PT. & PT. SOCKET SET (METRIC) PC RATCHETING SCREWDRIVER SET 9 5 PC /"DR. SOCKET WRENCH SET (METRIC) 7 5 PC /"DR. PASS-THRU RATCHET SOCKET SET (METRIC & S.A.E.) 9 5 PC /"DR. SOCKET SET (METRIC) / (S.A.E.) 5 PC RATCHETING SCREWDRIVER SET PC /"DR. SOCKET TOO SET (METRIC), 7 PC COMBINATION WRENCH SET (METRIC) 9 PC RATCHETING SCREWDRIVER SET PC /"DR. SOCKET SET (METRIC) 5 30 PC /"DR. & 3/"DR. PASS-THRU RATCHET SOCKET SET (METRIC) 9 3 PC FEEER GAUGES SET 5 35 PC /"DR. & 3/"DR. E-TORX SOCKET & WRENCH SET (METRIC) 7 3 PC /"DR. SOCKET SET (METRIC) 5 DOUBE-X ONG NOSE PIERS PC /"DR. SOCKET SET (METRIC & S.A.E.) 7 PC 3/"DR. SOCKET SET (METRIC & S.A.E.) PC AUTO REPAIR MASTER TOO SET 5 53 PC PROFESSIONA EECTRONIC TOO SET 53 5 PC AUTO REPAIR MASTER TOO SET 5 PC 3/"DR. SOCKET SET (METRIC) 5 PC /"DR. SOCKET SET (METRIC) 0 PC /"DR RATCHETING BIT DRIVER SET 5 PC /"DR. & 3/"DR. SOCKET SET (METRIC & S.A.E.) 9 7 PC /"DR. & /"DR. SOCKET WRENCH SET (METRIC) 30 0 PC /"DR. RATCHETING BIT DRIVER SET PC /"DR. & /"DR. SOCKET SET (METRIC) 9 9 PC TOO STORAGE AND TRAY SET 33 PC /"DR., 3/"DR. & /"DR. SOCKET WRENCH SET (METRIC & S.A.E.) 30 PC /"DR., 3/"DR. & /"DR. SOCKET WRENCH SET (METRIC & S.A.E.) 3 PC TOO STORAGE AND TRAY SET 3 PC TOO STORAGE AND TRAY SET 3 ADJUSTABE WRENCH 0 ADJUSTABE WRENCH WITH DIPPING GRIP 0 AUMINUM TOO BOX " 7 ANVI DOY A-SERIES MECHANICA TORQUE WRENCH A-SERIES PHIIPS SCREWDRIVER A-SERIES SOTTED SCREWDRIVER A-SERIES TORX SCREWDRIVER AUTO VOTAGE TESTER 53 AUTOMATIC WIRE STRIPPER 0 AVIATION TIN SNIPS 9, 99 BA PEIN HAMMER - FIBERGASS BA PEIN HAMMER - WOOD HANDE BI-META SAW BADES 55 BOT CUTTER 0, CABE FERRUES CRIMPING TOO 97 C-CAMP OCKING PIERS 93 CENTRE PUNCH 39 CHAIN CAMP OCKING PIERS 93 CIRCUIT TESTER 53 CAW HAMMER - FIBERGASS CAW HAMMER - WOOD HANDE COAX CRIMPING TOO 97 COD CHISE 39 COMBINATION DOUBE RATCHETING WRENCH (S.A.E.) / (METRIC) COMBINATION WRENCH (S.A.E.) / (METRIC) 7 CROSS WRENCH 7 CURVED DOY CURVED JAW OCKING PIERS 9 CURVED PEIN & FINISHING HAMMER DEAD BOW HAMMER (RUBBER) DIAGONA CUTTING PIERS DIGITA CIRCUIT TESTER 7 DOUBE BOX END WRENCH (S.A.E.) / (METRIC) 7 DOUBE BOX RATCHETING WRENCH (S.A.E.) / (METRIC) 5 DOUBE OPEN END WRENCH (S.A.E.) / (METRIC) 77 DOUBE SOCKET RATCHET HANDE (METRIC) DROP FORGED COI SPRING COMPRESSORS D-SUB CONTACT CRIMPING TOO 97 EECTRICA WIRE STRIPPER AND CRIMPER EECTRONIC TORQUE WRENCH ENERGY SAVINGS TYPE - DIAGONA CUTTING PIERS 95 ENERGY SAVINGS TYPE - END NIPPER PIERS 9 ENERGY SAVINGS TYPE - INESMAN PIERS 95 ENERGY SAVINGS TYPE - ONG NOSE PIERS 9 ENGINEER HAMMER WITH WOOD HANDE EXTRA ONG ARM HEX KEY (METRIC)

Product Description Index Product Highlights Description Pge Description Pge EXTRA ONG BA POINT HEX KEY (METRIC) FARE NUT WRENCH (S.A.E.) / (METRIC) FEX HEAD RATCHETING WRENCH (S.A.E.) / (METRIC) FEX HEAD SOCKET WRENCH (METRIC) FEX-SOCKET WRENCH (METRIC) GASKET SCRAPER 9 GERMANY TYPE SNAP RING PIERS 9, 95 GREASE COUPER 9 GROOVE JOINT PIERS 9 HACK SAW 5 HAWK SAW FRAME W/CARBON STEE BADE 55 HEAVY DUTY CRIMPING TOO 97 HEAVY DUTY NON-INSUATED CRIMPING TOO 9 HEAVY SHRINKING HAMMER 39 HEX KEY (METRIC) HIGH PRESSURE FEXIBE NYON HOSE 9 HYDRAUIC BOTTE JACK 5 INSUATED DIAGONA PIERS 9 INSUATED INESMAN PIERS 90 INSUATED ONG NOSE PIERS 9 INSUATED PHIIPS SCREWDRIVER INSUATED SOTTED SCREWDRIVER JUMBO COMBINATION WRENCH(S.A.E.) / (METRIC) SAND BAS FINISHED 7 IGHT SHRINKING HAMMER INESMAN PIERS ONG ARM BA POINT HEX KEY (METRIC) ONG ARM HEX KEY (METRIC) ONG NOSE OCKING PIERS 9 ONG NOSE PIERS ONG RAM JACK-PORTABE HYDRAUIC EQUIPMENT KIT 5 ONG TORX WRENCH HEX KEY (TAMPER-PROOF) -SHAPED TIRE WRENCH 3 MAGNETIC BIT DRIVER MAGNETIC PICK-UP TOO 3 MAGNETIC BENCH VISE 5 META SHEET CAMP OCKING PIERS 9 MINI HACKSAW 5 MINI TOO TROEY MINI TUBING CUTTER MINIATURE BENT NOSE PIERS 90 MINIATURE DIAGONA PIERS 9 MINIATURE END NIPPERS PIERS 9 MINIATURE FAT NOSE PIERS 9 MINIATURE INESMAN PIERS 90 MINIATURE ONG NOSE PIERS 90 MODUAR CONNECTOR CRIMPING TOO 9 NUT DRIVER SCREWDRIVER OI FITER PIERS 9 PICK & FINISHING HAMMER PIN PUNCH 39 PIPE WRENCH PISTON RING COMPRESSORS PASTIC CANTIEVER TOO BOX 5" PASTIC CUTTING PIERS 9 PASTIC TOO BOX 7, PRY AND BUMPING SPOON P-SERIES PHIIPS SCREWDRIVER 5 P-SERIES SOTTED SCREWDRIVER 5 P-SERIES TORX SCREWDRIVER 5 PVC TUBING CUTTER RATCHETING ADJUSTABE WRENCH 79 RATCHETING BIT DRIVER REVERSIBE RATCHETING WRENCH (S.A.E.) / (METRIC) ROING TOO TROEY ROTATING HANDE HYDRAUIC FOOR JACK 5 SATA DISPAY SHEF 55 SCISSORS JACK 5 SCRAPER WITH WOOD HANDE SEF ADJUSTING CUTTER STRIPPER 99 SIP JOINT PIERS 9 SNAP RING PIERS 93, 9 SOCKET ADAPTER W/QUICK REEASE (METRIC) 7 SOCKET DISPENSER 55 SOFT-FACE / HARD-FACE HAMMER TIPS SOFT-FACE HAMMER - WOOD HANDE STANDARD BUMPING HAMMER 39 STRAIGHT DOUBE-X ONG NOSE PIERS STRAIGHT JAW OCKING PIERS 9 STRAIGHT PATTERN SNIPS 0 STRAIGHT PEIN & FINISHING HAMMER STUBBY WRENCH (METRIC) TAB CONNECTOR CRIMPING TOO 9 TAPE MEASURE 5 T-HANDE PT. SOCKET (METRIC) T-HANDE BA POINT HEX KEY (METRIC) T-HANDE HEX KEY (METRIC) TOE DOY TOO CHEST 5 TRAY SET - PC DOUBE BOX END WRENCH SET (METRIC) 3 TRAY SET - PC WRENCH SET (METRIC) 30 TRAY SET - 3PC SCREWDRIVER SET 3 TRAY SET - PC DOUBE RATCHETING COMBINATION WRENCH SET (S.A.E.) 3 TRAY SET - 9PC DOUBE RATCHETING COMBINATION WRENCH SET (METRIC) 3 TRAY SET - PC /"DR. SOCKET SET (S.A.E.) 3 TRAY SET - 5PC /"DR. SOCKET SET (S.A.E.) 35 TRAY SET - PC /"DR. SOCKET SET (METRIC) 33 TRAY SET - 7PC /"DR. SOCKET SET (METRIC) 30 TRAY SET - 7PC COMBINATION WRENCH (S.A.E.) & HEX KEY SET 35 TRAY SET - 9PC 3/"DR. SOCKET SET (S.A.E.) 35 TRAY SET - 30PC COMBINATION WRENCH (METRIC) & HEX KEY SET 3 TRAY SET - 33PC 3/"DR. SOCKET SET (METRIC) 30 TRAY SET - 3PC 3/"DR. & /"DR. IMPACT SOCKET SET (METRIC) 33 TRAY SET - PC PIERS SET 3 TRAY SET - PC SNAP RING PIERS SET 3 TRAY SET - PC TOO SET 3 TRAY SET - 59PC /"DR. SOCKET SET (S.A.E.) 35 TRAY SET - 5PC ADJUSTABE WRENCH AND PIERS SET 3 TRAY SET - PC /"DR. SOCKET SET (METRIC) 30 TRAY SET - PC COMBINATION WRENCH SET (METRIC) 3 TRAY SET - PC FIE SET 3 T-SERIES DUA HEAD SCREWDRIVER T-SERIES GO-THROUGH PHIIPS SCREWDRIVERS 3 T-SERIES GO-THROUGH SOTTED SCREWDRIVERS 3 T-SERIES MECHANICA TORQUE WRENCH T-SERIES PHIIPS SCREWDRIVER T-SERIES SOTTED SCREWDRIVER 3 TUBING CUTTER TWO WAY OI FITER WRENCH 9 UNIVERSA BA JOINT PUER 7, UTIITY TROEY VAVE SEA RING PIERS WEDING CAMP OCKING PIERS 9 WIRE & CABE CUTTING PIERS 9 WIRE STRIPPER W/CUTTER PIERS 99 X OCKING FEX HEAD RATCHETING WRENCH (S.A.E.) / (METRIC) 7 X X-BEAM COMBINATION WRENCH (S.A.E.) / (METRIC) 75 X X-BEAM RATCHETING WRENCH (S.A.E.) / (METRIC) 5 IFETIME WARRANTY All SATA Products (unless otherwise stted) re fully wrrnted ginst mnufcturing defult including fulty mterils nd workmnship, subjected to being used for its intended purpose nd llowing for fir wer nd ter. Defective tools will be repired nd/or replced t SATA's discretion free of chrge. They should be held by buyers or returned for inspection to the fctory upon request. This lifetime wrrnty does not extend to products tht hve been improperly used, ltered, bused or repired by others. Rustiness fter usge, electroplte desqumtion, surfce scrped or plstic hndle dmge re not within wrrnty rnge. Dmge in the pckging is lso out of wrrnty rnge. WARRANTY INFORMATION The obvious dent or electroplte desqumtion indictes tht pipe wrench or hmmer (or other form of "cheter") hs been bused on this rtchet. Plese use lrger size of rtchet to increse the leverge of ny wrench. The obvious slippge on socket end or crck on socket wll indictes tht this impct tools hs been used on this socket. When you re working with impct tools, plese choose impct sockets with blck cot. The brech of hndle, blde chip-off nd bent shnks re the results of using screwdriver s pry br, punch or chisel. Distort or brech on the wrench is lso result of using the wrench s pry br. Plese use the right pry br for prying. Torx is registered trdemrk of Acument Intellectul Properties, C. 3

Authorized Distributor: www.sttools.com.sg 0