Arden MINI M odel year 2006-2013 Interested? Then just ask your MINI dealer or directly at Arden for our product line. since 1972
aerodynamics & design Installation Arden MINI Steel Mesh Grill for Front Spoiler Installation Arden MINI Steel Mesh Grill for Front Spoiler 180.00 USD 180.00 USD Arden MINI AM2 "Cup" spoiler kit for R56 AMK 10001 1 1,230.00 USD Special "Cup" Spoiler Set consisting of: - Front Spoiler - Rear Diffusor This spoiler kit in connection with this our front-and rear apron stresses the sporty note of your vehicle. At the same time, road contact pressure on the front and rear axle is increased. The vehicle thereby receives a much better road holding. Installation Arden MINI AM2 "Cup" Spoiler Kit +painting 300.00 USD Only in combination with original MINI works aerodynamic front and rear spoiler. We would be pleased to make an offer. Arden MINI Steel Mesh Grill for Front Spoiler (Cooper S) up to 2010 Hand-made stainless steel grille for the front spoiler. (up to 2010) AMK 10102 3 285.00 USD Installation Arden MINI Steel Mesh Grill for Front Spoiler 180.00 USD Arden MINI Steel Mesh Grill for Front Spoiler (Cooper S) from 2011 onwards Hand-made stainless steel grille for the front spoiler with brake ducts (from 2011 onwards) AMK 10122 3 285.00 USD Installation Arden MINI Steel Mesh Grill for Front Spoiler 180.00 USD
Arden MINI Steel Mesh Grill for Front Spoiler (JCW Coupe) from 2012 onwards Hand-made stainless steel grille for the front spoiler with brake ducts (from 2012 onwards) AMK 10123 3 315.00 USD Arden MINI Stainless Steel Radiator Grill (Cooper S) AMK 10101 3 285.00 USD Hand-made Stainless Steel Radiator Grille electrolytically mirror finished and polished. Installation Arden MINI Stainless Steel Radiator Grill 60.00 USD Arden MINI Hood Air Scoop Grille (Cooper S) AMK 10100 3 145.00 USD Mirror finished and polished, hand-made Stainless Steel Grille. Installation Arden MINI Hood Air Scoop Grill 60.00 USD Arden MINI Stainless Steel Mesh-Kit AMK 10107 3 525.00 USD Consisting of: - AMK 10105 Stainless Steel Radiator Grille - AMK 10106 Stainless Steel Front Spoiler grille Fitting Arden Stainless Steel Mesh Kit 180.00 USD Arden MINI Countryman Steel Mesh Grill for lower area front bumper Hand-made stainless steel grille for the front bumper AMK 11103 3 370.00 USD
Arden MINI Stainless Steel Mesh-Kit (Cooper S) up to 2010 AMK 10104 3 975.00 USD Consisting of: - AMK 10100 Hood Air Scoop Grill - AMK 10101 Stainless Steel Radiator Grille (up to 2010) - AMK 10102 Stainless Steel Front Spoiler grille - AMK 10103 Rear Apron grille Installation Arden MINI Stainless Steel Mesh-Kit 360.00 USD Arden MINI daylights and steel mesh grill for front spoiler ARK 8000000 3 735.00 USD Our highly valuable LED daytime running lights complete the lightening of your car and take care of a good look thanks to a brilliant white light. Moreover, road safety is increased due to an improved road saftey. Arden MINI Daylights for Steel Mesh Grill (Cooper S) up to 2010 AMK 10112 3 735.00 USD Arden MINI Daylights and Steel Mesh Grill for MINI Cooper S up to MY2010 The LED s do not only increase road safety but also allow a personalization of your vehicle. Arden MINI Countryman Steel Mesh Grill for front upper area front bumper Hand-made stainless steel grille for the front bumper AMK 11102 3 240.00 USD Arden MINI Countryman Steel Mesh Grill for bonnet AMK 11101 3 495.00 USD Hand-made stainless steel grille for bonnet
Arden MINI Countryman 4-piece-Set Steel Mesh Grill AMK 11105 3 1,250.00 USD Hand-made stainless steel grills for bonnet, front and rear bumper Arden MINI Countryman Steel Mesh Grill for rear bumper AMK 11104 3 240.00 USD Hand-made stainless steel grille for the rear bumper Arden MINI Stainless Steel Radiator Grill AMK 10105 3 285.00 USD Hand-made Stainless Steel Radiator Grille electrolytically mirror finished and polished. Installation Arden MINI Stainless Steel Radiator Grill 60.00 USD Arden MINI Steel Mesh Grill for Front Spoiler AMK 10106 3 285.00 USD Hand-made stainless steel grille for the frontspoiler. Installation Arden MINI Steel Mesh Grill for Front Spoiler 180.00 USD Arden MINI Stainless Steel Grill for Rear Apron (Cooper S) up to 2010 Hand-made Stainless Steel Grille for Rear Apron. (up to 2010) AMK 10103 3 285.00 USD Installation Arden MINI Stainless Steel Grill for Rear Apron 180.00 USD
Arden MINI AM2 Cup Rear Spoiler AMK 10002 3 1,875.00 USD in preparation exhaust Arden MINI Stainless Steel Exhaust from Catalyst Converter Cooper S 2002-2008 Arden MINI Stainless Steel Exhaust System from the Catalyst Converter With strong and high-powered Sound. For more Efficiency and an improved engine Response (not for convertible) must be fitted only as complete system AMK 10420 3 1,470.00 USD Installation Arden MINI Stainless Steel Exhaust System as of Catalytic Converter 90.00 USD Arden MINI Stainless Steel Exhaust for Cooper S 2002-2008 Convertible Arden MINI Stainless Steel Exhaust System from the Catalyst Converter. With strong and high-powered Sound. For more Efficiency and an improved engine Response Must be fitted only as complete system. AMK 10421 3 1,495.00 USD Installation Arden MINI Stainless Steel Exhaust System as of Catalytic Converter 90.00 USD
breakes Arden MINI high performance braking system AMK 10270 1 4,125.00 USD The braking system is not only suitable for vehicles with a performance increase but also for an increase of road saftey of series cars. The system consists of: Four-piston caliper brakes Front axle: two piece 320x28mm drilled brake discs Rear axle: one piece 259x10mm drilled brake discs Installation Arden MINI High Performance Braking System 300.00 USD chassis Arden MINI Full-Suspension kit AMK 10200 1 1,935.00 USD Special complete chassis with dampers and springs, height adjustable to -40 mm. This complete chassis was developed especially for Mini. this gives a good balance of sportyness and driving comfort. Installation Arden MINI Full-Suspension kit, incl. axle measurement 480.00 USD Arden MINI lowering Kit (spring kit) AMK 10250 1 370.00 USD With this spring kit the vehicle height is lowered by 25mm. moreover, a sportier driving behavior and improved curve layout can be achieved. Installation Arden MINI Lowering Kit, incl. axle measurement 540.00 USD Arden MINI Lock Differential AMK 10225 1 2,895.00 USD LSD differential with gears automatically biases the torque from the spinning wheel across the axle in constantly varying degrees, but never engages fully. Significant traction maximization and minimization of the spinning wheels. This increases the safety, especially in wet conditions. The LSD differential is completely maintenance free and the standard oil lubrication is maintained.
wheels Sporty: Challenge II in polished bright-black AMK 10600 - SGVP 4 The 8x18" alloy rim is characterized by outstanding German manufacturing quality and an elaborate and sporty look. The new rim in OEM quality has the color of polished bright black. 435.00 USD The rims are available in the dimension 8x18" and fits with 215/35R18 tires. Sporty: Challenge II in clear black matt AMK 10600 - SKM 4 The 8x18" alloy rim is characterized by outstanding German manufacturing quality and an elaborate and sporty look. The new rim in OEM quality has the color of black (matt and clear). 435.00 USD The rims are available in the dimension 8x18" and fits 215/35R18 tires. Ultralight: Challenge I AMK 10500 0 1,185.00 USD The rim is milled from one single block and has a weight of 6,9kg only. Hence, the original unsprung mass is reduced and a more agile drivability achieved. Therefore, the rim is perfectly suitable for road traffic and use on race tracks. The rim is available in the dimension 8x18", circular hole 4x100mm with offset 35.
Sporty: Challenge II polished bright-black complete wheel set AMK 10605 - SGVP 4 The 8x18" alloy rim in polished bright black is characterized by outstanding German manufacturing quality and an elaborate and sporty look. The rim has OEM quality. 2,890.00 USD The rims are available in the dimension 8x18" including 205/40R18 Vredestein tires (optionally other manufacturers). Sporty: Challenge II clear black matt complete wheel set. AMK 10605 - SKM 4 The 8x18" alloy rim in clear black matt is characterized by outstanding German manufacturing quality and an elaborate and sporty look. The rim has OEM quality. 2,890.00 USD The rims are available in the dimension 8x18" including 205/40R18 Vredestein tires (optionally other manufacturers). Ultralight: Challenge I complete wheel set AMK 10505 4 5,850.00 USD The rim is milled from one single block and has a weight of 6,9kg only. Hence, the original unsprung mass is reduced and a more agile drivability achieved. Therefore, the rim is perfectly suitable for road traffic and use on race tracks. The rims are available in the dimension 8x18" including 205/40R18 sport tires.
Air Pressure Control System to upgrade AAK 21186 1 825.00 USD The air pressure control system supervises the air pressure and temperature of all 4 tyres through sensors every 3,4 seconds. The information is shown in a display. Installation costs for the Arden air pressure control system 360.00 USD interior Arden MINI with two tone Leather interior AMK 10800 1 18,750.00 USD The complete interior is created in two tone noble design, meticulously manufactured from high-grade Nappa leather combined with Alcantara and some special piano lacqueur elements. Classy up to the smallest detail. Each interior can be individually manufactured. Arden MINI Pedal Set including Foot Rest (for Manuell gearbox) AMK 10650 3 465.00 USD Arden aluminum pedal set for accelerator, brake and clutch pedals as well as a foot rest. High gloss polished with nobbly safety surface and Arden engraving. TÜV certificate. For increased operating safety and a sportive appearance. Installation Arden MINI Pedal Set including Food Rest 120.00 USD Arden MINI Pedal Set including Foot Rest (for Automatic gearbox) Arden aluminum pedal set for accelerator, brake pedal and foot rest. High gloss polished with a nobbly safety surface and Arden engraving. TÜV certificate. For increased operating safety and a sportiv appearance. Installation Arden MINI Pedal Set including Food Rest AMK 10660 3 435.00 USD 90.00 USD
Arden MINI Aluminium Shift Knob AMK 10700 3 195.00 USD Arden MINI Aluminium Shift Knob. High gloss polished with 6-gear shift pattern. With integrated Arden crest. Installation Arden MINI Aluminium Shift Knob 45.00 USD Installation Arden MINI Aluminium Handbrake Grip 45.00 USD Arden door sill protectors (pair) AMK 10740 3 295.00 USD Arden stainless steel door sill protector with illuminated Arden logo. Provide your vehicle with a personal touch and choose for a personalised lettering. Contact us for further information. We will gladly advise you. Installation of the Arden door sill protectors 60.00 USD Arden Bi-Color seat arrangement AMK 10820 0 3,900.00 USD Front and back seats in leather or alcantara after choice. Complete seat arrangement dismount and mount 240.00 USD Plus assembly. Developed parts must be sent to us. Complete middle console in leathe or alcantara AMK 10830 0 840.00 USD Complete middle console in a choice of leather or alcantara. Dismount and mount the center console 240.00 USD Plus assembly. Developed parts must be sent to us.
Door and back disguising in leather or alcantara AMK 10840 0 4,350.00 USD Door and panels in leather or alcantara. Colour by choice. Dismount and mount door and panels. 480.00 USD Only possible at the Arden plant in Krefeld Dismounted parts must be sent to us. Arden leather or alcantara upholstery for complete boot AMK 10860 1 2,100.00 USD Arden leather or alcantara upholstery for complete boot in high quality leather. Handcraftet in our own saddlery. Including seat back, floor and side covering. Dismount and mount the boot lining 360.00 USD Only possible at the Arden plant in Krefeld Dismounted parts must be sent to us. Arden leather or alcantara upholstery for the car-roof and A, B, C pillars Arden leather upholstery for the car-roof and the A, B, C pillars in high quality leather or alcantara. Colour adapted. surcharge for roof with sunroof: 299,00 Dismount and mount A B C Columns AMK 10870 1 1,830.00 USD 240.00 USD Only possible at the Arden plant in Krefeld Disassembled parts must be sent to us. Entrence dismount and mount 360.00 USD Plus assembly. Developed parts must be sent to us.
Arden leather upholstery for dashboard AMK 10810 0 2,400.00 USD Upholstery of the complete dashboard in high-quality processed leather or Alcantara. Colour aligned. Installation dashboard 720.00 USD Plus assembly. Developed parts must be sent to us. Arden MINI floor carpets (4 pieces) AMK 10300 3 295.00 USD Floor carpets of premium velour manufactured in the highest prezision and quality. With Arden logo. Color aligned. If requested with incorporated personal initials: from 145.00 USD. engine
Arden Performance-Kit for "Pro" for John Cooper Works 1.6 (155 kw / 211 hp) Performance increase of 35 kw (47 hp), torque increase of 60 Nm and optimization of the complete torque profile by using: - additional ECU (AMK 99109) - sport performance air filter - sport intercooler (AMK 10945) - stainless steel exhaust system (middle and rear end silencer) incl. dyno run before and after tuning (incl. documents) Please contact us before your order if you have a convertible. Comment: export version The installation of this product at Arden in Krefeld cost 720.00 USD. AMK 99114 1 6,290.00 USD
Arden Power Increase "Z1" for John Cooper Works 1.6 (155 kw / 211 hp) Performance increase of 31 kw (42 hp), torque increase of 52 Nm and optimization of the complete torque profile by using an additional ECU. Easy installation by using factory connectors. (comment: one wire has to be soldered!) Optionally we offer a remote control (ARK 71000) for this ECU. So you can activate or deactivate the power increase. The installation of this product at Arden in Krefeld cost 120.00 USD. AMK 99109 1 2,005.00 USD Arden Power Increase "Z1" for Cooper S 1.6 (128 kw / 174 hp) AMK 99102 1 1,880.00 USD Performance increase of 25 kw (34 hp), torque increase of 35 Nm and optimization of the complete torque profile by using an additional ECU. Easy installation by using factory connectors. Inkl. TÜV certificates Optionally we offer a remote control (ARK 71000) for this ECU. So you can activate or deactivate the power increase. The installation of this product is for free at the Arden workshop in Krefeld. Arden MINI Intercooler with Motorsport-Net AMK 10945 1 1,260.00 USD Improves the Cooling of the injected Charged Air. Installation Arden MINI Motorsport-Net 180.00 USD Arden Power Increase "Z1" for Cooper One D 1.4 (55 kw / 75 PS) Performance increase of 11 kw (15 hp), torque increase of 40 Nm and optimization of the complete torque profile by using an additional ECU. Easy installation by using factory connectors. (comment: one wire has to be soldered!) Inkl. TÜV certificates Optionally we offer a remote control (ARK 71000) for this AMK 99105 1 1,330.00 USD
ECU. So you can activate or deactivate the power increase. The installation of this product at Arden in Krefeld cost 120.00 USD. Arden Power Increase "Z1" for Cooper One D 1.4 (65 kw / 88 hp) Performance increase of 13 kw (18 hp), torque increase of 38 Nm and optimization of the complete torque profile by using an additional ECU. Easy installation by using factory connectors. (comment: one wire has to be soldered!) Inkl. TÜV certificates Optionally we offer a remote control (ARK 71000) for this ECU. So you can activate or deactivate the power increase. The installation of this product at Arden in Krefeld cost 120.00 USD. AMK 99106 1 1,330.00 USD Arden Power Increase "Z1" for Cooper One D 1.6 (66 kw / 90 hp) Performance increase of 13 kw (18 hp), torque increase of 43 Nm and optimization of the complete torque profile by using an additional ECU. Easy installation by using factory connectors. (comment: one wire has to be soldered!) Optionally we offer a remote control (ARK 71000) for this ECU. So you can activate or deactivate the power increase. The installation of this product at Arden in Krefeld cost 120.00 USD. AMK 99107 1 1,330.00 USD Arden Power Increase "Z1" for Cooper One Clubman D 1.6 (66 kw / 90 hp) Performance increase of 14 kw (18 hp), torque increase of 43 Nm and optimization of the complete torque profile by using an additional ECU. Easy installation by using factory connectors. (comment: one wire has to be soldered!) AMK 99108 1 1,330.00 USD
Optionally we offer a remote control (ARK 71000) for this ECU. So you can activate or deactivate the power increase. The installation of this product at Arden in Krefeld cost 120.00 USD. Arden Power Increase "Z1" for Cooper D 1.6 / Clubman D 1.6 (80 kw / 106 hp) Performance increase of 15 kw (20 hp), torque increase of 40 Nm and optimization of the complete torque profile by using an additional ECU. Easy installation by using factory connectors. (comment: one wire has to be soldered!) Incl. TÜV certificates Optionally we offer a remote control (ARK 71000) for this ECU. So you can activate or deactivate the power increase. The installation of this product at Arden in Krefeld cost 120.00 USD. AMK 99100 1 1,385.00 USD Arden Power Increase "Z1" for Cooper D 1.6 (82 kw / 112 hp) AMK 99101 1 1,490.00 USD Performance increase of 17 kw (21 hp), torque increase of 54 Nm and optimization of the complete torque profile by using an additional ECU. Easy installation by using factory connectors. (comment: one wire has to be soldered!) Optionally we offer a remote control (ARK 71000) for this ECU. So you can activate or deactivate the power increase. The installation of this product at Arden in Krefeld cost 120.00 USD. Arden Power Increase "Z1" for Cooper SD 2.0 (105 kw / 143 hp) AMK 99104 1 1,630.00 USD Performance increase of 21 kw (28 hp), torque increase of 50 Nm and optimization of the complete torque profile by using an additional ECU. Easy installation by using factory connectors. (comment:
one wire has to be soldered!) Inkl. TÜV certificates Optionally we offer a remote control (ARK 71000) for this ECU. So you can activate or deactivate the power increase. The installation of this product at Arden in Krefeld cost 120.00 USD. Arden Power Increase "P1" for Cooper One D 1.4 (55 kw / 75 hp) Performance increase of 9 kw (12 hp), torque increase of 35 Nm and optimization of the complete torque profile by customizing the original engine map. AMK 99119 1 1,385.00 USD Only possible at the Arden workshop in Krefeld or the ECU must be sent to us Arden Power Increase "P1" for Cooper One D 1.4 (65 kw / 88 hp) Performance increase of 10 kw (13 hp), torque increase of 35 Nm and optimization of the complete torque profile by customizing the original engine map. AMK 99120 1 1,385.00 USD Only possible at the Arden workshop in Krefeld or the ECU must be sent to us Arden Power Increase "P1" for Cooper One D 1.6 (66 kw / 90 hp) Performance increase of 11 kw (15 hp), torque increase of 35 Nm and optimization of the complete torque profile by customizing the original engine map. AMK 99121 1 1,385.00 USD Only possible at the Arden workshop in Krefeld or the ECU must be sent to us
Arden Power Increase "P1" for Cooper One Clubman D 1.6 (66 kw / 90 hp) Performance increase of 11 kw (15 hp), torque increase of 35 Nm and optimization of the complete torque profile by customizing the original engine map. AMK 99122 1 1,385.00 USD Only possible at the Arden workshop in Krefeld or the ECU must be sent to us Arden Power Increase "P1" for Cooper D 1.6 / Clubman D 1.6 (80 kw / 106 hp) Performance increase of 13 kw (18 hp), torque increase of 35 Nm and optimization of the complete torque profile by customizing the original engine map. AMK 99116 1 1,450.00 USD Only possible at the Arden workshop in Krefeld or the ECU must be sent to us Arden Power Increase "P1" for Cooper D 1.6 (82 kw / 112 hp) AMK 99117 1 1,510.00 USD Performance increase of 13 kw (18 hp), torque increase of 35 Nm and optimization of the complete torque profile by customizing the original engine map. Only possible at the Arden workshop in Krefeld or the ECU must be sent to us Arden Power Increase "P1" for Cooper SD 2.0 (105 kw / 143 hp) AMK 99118 1 1,730.00 USD Performance increase of 18 kw (24 hp), torque increase of 45 Nm and optimization of the complete torque profile by customizing the original engine map. Only possible at the Arden workshop in Krefeld or the ECU must be sent to us
Arden Automobilbau GmbH Automotive Experience since 1972 fon: +49 (0) 2151 / 37 23 0 fax: +49 (0) 2151 / 37 23 23 Untergath 175 D-47805 Krefeld arden@arden.de www.arden.de All original Arden attaching parts will be delivered with a perspicuous construction guidance. Installation can be done in every service center. If modifications can only be done at Arden plant Krefeld, the tranfer of car is at cost price. Aerodynamic and design parts are design copyrighted. Images may differ from original. since 1972