Talos Revolving Doors Talos Circular Sliding Doors For a stylish entrance Convenient Transparent Timeless
Design and function «The entrance area is our hotel's business card - it makes the first and lasting impression on guests. We opted for a Talos revolving door. Along with the stylish design we really appreciate the excellent thermal insulation it provides and how easy it is to pass through even with luggage.» 2
Energy-saving Talos revolving doors and circular sliding doors Versatile Talos revolving doors Thanks to their closed design, revolving doors in particular save the highest possible amount of energy during entry or exit of a building. Without the draught that usually occurs with standard opening doors, the interior next to the revolving door may be optimally used for a reception or seating area. Optimal throughput rates can be achieved by people being able to enter and exit the building at the same time. The revolving doors come in a wide variety of options according to the customers' demands: wheelchair accessible, with emergency exit function, with secure night closure or with corresponding resistance classes against burglary. The transparent design adds to the attractiveness of the entrance area, which is representative of the building as a whole. Effective Talos circular sliding doors With their great flexibility in design, circular sliding doors give each entrance a special, individual touch. The facade s thermal separation is not affected by the circular sliding doors opening one after the other. The slim design with sliding doors allows for a high throughput rate. User friendliness A sophisticated sensor system in compliance with the latest standards prevents users from being injured. A button for wheelchair users reduces the rotational speed of the drive, while the running controller limits the speed and protects against impacts, crushing and jamming. Security For increased security demands, reinforced burglaryresistant versions are certified according to standards RC2 and WK3 respectively. Options such as a rotating unit with emergency exit 1 or night closure function complete the product range. 1 Individual authorisation required (competent building authority) Talos Revolving Doors RDR Throughput rate = 16 to 28 per minute (1 direction) Security level = Comfort = Talos Circular Sliding Doors CSD Throughput rate = over 40 per minute (1 direction) Security level = Comfort = 3
Advantages of Talos revolving doors and circular sliding doors Versatility for users and operators. Talos revolving doors RDR Energy-saving thermal separation Transparent all-glass units with elegant profiles Solutions suitable for escape routes Option with night closure Optional button to make access easer for disabled users Versions with resistance classes RC2 and WK3 Safety sensor system according to DIN EN 16005 Talos circular sliding doors CSD Energy-saving thermal separation High throughput rate Solutions suitable for escape routes Transparent all-glass units with elegant profiles Safety sensor system according to DIN EN 16005 Barrier-free access for revolving doors by adding swing doors or sliding doors at the side, or alternatively by reducing the rotating speed. 4
The ideal solution for any access point Prepared for emergency situations four-leaved revolving door with approved escape route rotating unit Transparent all-glass unit circular sliding door with attractive profiles An elegant combination all-glass design Added security revolving door with night closure 5
RDR Revolving Doors Standard units Note RDR-E01 Construction Outside diameter 2100 3700 Entrance and escape route width See dimensions table on page 11. Total height 2300 Passage height 2100 Upper part of body 200 Number of door leaves 4 Rotary cycle 180 Body Side panels With 8 mm laminated safety glass, alternatively metal-clad. Rotating unit Finish Function Installation Thermal separation Top cover/ceiling Maintenance openings In facade level. Top dustproof cover made of raw aluminium plate. Two maintenance openings in the lower ceiling plate (for DL option, outer opening can be locked using customer s profile half cylinder). Framed in T40 light metal profiles. Tempered safety glass. With sealing brushes. Black U-shaped handles. Bolt lock prepared for on-site profile cylinder. Powder-coated in a RAL colour. Can be revolved manually, smooth running. On finished floor level (FFL). All dimensions in mm 6
RDR-C01 Additional options compared to RDR-E01. 2100 3700 See dimensions table on page 11. 2300 2100 200 4 180 With 8 mm laminated safety glass, alternatively metal-clad. In facade level. Top dustproof cover made of raw aluminium plate. Two maintenance openings in the lower ceiling plate (for DL option, outer opening can be locked using customer s profile half cylinder). Framed in T40 light metal profiles. Tempered safety glass. With sealing brushes. Black U-shaped handles. Bolt lock prepared for on-site profile cylinder. Powder-coated in a RAL colour. Can be revolved manually, smooth running. On finished floor level (FFL). 1050 DH = 2100 DR GH = DH + DR official member of Ø2000 - Ø3600 Ø2100 - Ø3700 7
RDR Revolving Doors Standard units RDR-C03 Note Including emergency exit function, activated using emergency stop switch located on inner corner post. Construction Outside diameter 2100 3700 Entrance and escape route width See dimensions table on page 11. Total height 2300 Passage height 2100 Upper part of body 200 Number of door leaves 4 Rotary cycle 180 Body Side panels With 8 mm laminated safety glass, alternatively metal-clad. Thermal separation In facade level. Safety strips On opposite closing edges. Top cover/ceiling Top dustproof cover made of raw aluminium plate. Maintenance openings Two maintenance openings in the lower ceiling plate (for DL option, outer opening can be locked using customer s profile half cylinder). Rotating unit Framed in T56 light metal profiles. Tempered safety glass, including break-out symbols to stick on the door leaves. With sealing brushes. Black U-shaped handles. Safety strips Horizontal and vertical on the door leaves. Two bar locks to lock the rotating unit upwards and downwards. Finish Function Electrical equipment Installation Powder-coated in a RAL colour. Fully automatic K8-SA1 with OPL 01 and KGB emergency escape module. Motion started using infrared sensors. Reverse button in the entrance segments. Two buttons, Ø 20, for disabled persons. Two emergency stop switches. Control system integrated in the unit. Power supply 230 VAC, 50 Hz. On finished floor level (FFL). All dimensions in mm 8
RDR-S01 RDR-C02 2100 3300 (3700 only in the case of T40) 3920-4920 See dimensions table on page 11. See dimensions table on page 11. 2230 2400 2100 2200 130 200 4 4 180 180 With 8 mm laminated safety glass. With 8 mm laminated safety glass, alternatively metal-clad. In facade level. In facade level. On opposite closing edges. Glass ceiling consisting of 2 laminated safety glass segments. Top dustproof cover made of raw aluminium plate. In the lower ceiling plate. Framed in T25 light metal profiles (Ø 3700 T40). Tempered safety glass. Framed in T56 light metal profiles. Tempered safety glass. With sealing brushes. Black U-shaped handles. Bolt lock prepared for on-site profile cylinder (closed downwards). Powder-coated in a RAL colour. With sealing brushes. Without handles. Horizontal and vertical on the door leaves. Two bar bolts prepared for on-site profile cylinder. Powder-coated in a RAL colour. Can be revolved manually, smooth running. SA3 servo drive with OPL 03. On finished floor level (FFL). Motion started using infrared sensors. Two pre-sensors, flush-mounted in ceiling plate. Reverse button in the entrance segments. Two buttons, Ø 20, for disabled persons. Two emergency stop switches. Control system integrated in the unit. Power supply 230 VAC, 50 Hz. On finished floor level (FFL). 1050 DH=2200 DR GH=DH+DR 1050 DH=2200 DR GH=DH+DR 2557-3264 Ø3800-Ø4800 Ø3920-Ø4920 9
CSD Circular Sliding Doors Standard units CSD-C01 CSD-C02 Construction 2000-4100 2000-4100 Outside diameter Entrance and escape route width See dimensions table on page 11. See dimensions table on page 11. Total height 2300 2300 Passage height 2100 2100 Upper part of body 200 200 Body Side panels With 8 mm laminated safety glass, alternatively metal-clad. With 8 mm laminated safety glass, alternatively metal-clad. Thermal separation In facade level. In facade level. Top cover/ceiling Top cover made of raw aluminium plate, dustproof. Top cover made of raw aluminium plate, dustproof. Maintenance openings Removable ceiling panels. Removable ceiling panels. Sliding door leaf Framed in light alloy profiles. Framed in light alloy profiles. 8 mm laminated safety glass panel. 8 mm laminated safety glass panel. Inner and outer doors double-leaved. Double-leaved. Finish Powder-coated in a RAL colour. Powder-coated in a RAL colour. Function Installation 2 drives with control unit and 6 infrared motion detectors for automatic opening in the upper part of the body. On sub floor level SFL, measure X = 60-79. 1 drive with control unit in the upper part of the body and 3 infrared motion detectors. On sub floor level SFL, measure X = 60-79. X DH 2100-3500 GH = DH + 200 DH 2100 GH = DH + 200 DR DR Ø 1900-4000 80 DB= Ø/2*1,284-70 80 Ø1990-4090 DB= Ø/2*1,284-70 All dimensions in mm Ø 2000-4100 10
Dimensions tables RDR-E01/RDR-C01 Ø outside Ø inside Entrance width 2100 2000 1332 2200/2300 2100/2200 1402/1474 2400/2500 2300/2400 1544/1615 2600/2700 2500/2600 1685/1756 2800/2900 2700/2800 1826/1897 3000/3100 2900/3000 1968/2039 3200/3300 3100/3200 2109/2180 3400/3500 3300/3400 2251/2322 3600/3700 3500/3600 2392/2463 RDR-C03 Ø outside Ø inside Entrance width Escape route width 2100 2000 1300 925 2200/2300 2100/2200 1370/1440 975/1025 2400/2500 2300/2400 1510/1580 1075/1125 2600/2700 2500/2600 1650/1720 1175/1225 2800/2900 2700/2800 1790/1860 1275/1325 3000/3100 2900/3000 1930/2000 1375/1425 3200/3300 3100/3200 2070/2140 1475/1525 3400/3500 3300/3400 2210/2280 1575/1625 3600/3700 3500/3600 2350/2420 1675/1725 RDR-S01 Ø outside Ø inside Entrance width 2100 2000 1332 2300 2200 1474 2500 2400 1615 2700 2600 1756 2900 2800 1897 3100 3000 2039 3300 3200 2180 3700 3600 2463 RDR-C02 Ø outside Ø inside Entrance width Escape route width 3920 3800 2557 1825 4120 4000 2698 1925 4320 4200 2839 2025 4520 4400 2981 2125 4720 4600 3122 2225 4920 4800 3264 2325 CSD-C01 Ø outside Ø inside Entrance width 2000 1900 1140 2100 2000 1210 2300 2200 1340 2500 2400 1470 2700 2600 1600 2900 2800 1725 3100 3000 1855 3300 3200 1980 3500 (Dual) 3400 2110 3700 (Dual) 3600 2240 3900 (Dual) 3800 2370 4100 (Dual) 4000 2500 CSD-C02 Ø outside Ø inside Entrance width 2000 1900 1140 2100 2000 1210 2300 2200 1340 2500 2400 1470 2700 2600 1600 2900 2800 1725 3100 3000 1855 3300 3200 1980 3500 (Dual) 3400 2110 3700 (Dual) 3600 2240 3900 (Dual) 3800 2370 4100 (Dual) 4000 2500 11
Options (depending on unit type) Construction Increase passage height. Increase upper part of body. Glass ceiling without frame (side panels, 12 mm laminated safety glass). RDR-E01 RDR-C01 RDR-C03 RDR-S01 RDR-C02 Water tray or waterproof cover of outer part of body, made of light metal. Insulation of outer upper part of the body. Resistance class RC2. Resistance class WK3. Varied night closures. Motor for night closure. Monitoring of night closure, notification of status closed or closed and locked. Rotating unit, three-leaf (120 ). T40 rotating unit, P4A laminated safety glass. T25 or T40 foldable rotating unit, every leaf is manually foldable, including bolt lock and separate contacts for electrical transmission, up to max. outside diameter of 3000. Stainless steel handle horizontal or vertical, installed on door leaf. Monitoring of door leaf locking upwards (except -S01) or downwards. Floor element; stainless steel floor ring for pre-installation. Drive attachment in on-site floor pit or underfloor. Stainless steel tub for the floor ring in the outer half (for drainage). Clamping rail for fixing on-site sealing foil, measure X = 150 or larger. Stainless steel plate, may be perforated, to apply floor covering. Stainless steel plate for floor element. Coir mats or black rubber mats (optionally equipped with arrow) or carpet as cleaning zone. Finish AISI 304 stainless steel, satin finish or S8 mirror polished. E6 anodised in colour. Function Running controller to limit speed (recommended). SA1 servo positioning drive turns rotating unit at passage speed (started by pushing manually), including electric transmission kit, horizontal and vertical safety strips, key switch to release the unit, emergency release button (reverse button), two emergency stop switches and two Ø 20 buttons for disabled users, optionally with OPL 01. SA1 configuration. Demand locking BV1. SA2 servo positioning drive moves the manually rotated rotating unit into the basic position; including key switch to release the unit, finger protection strips on the bottom of the door leaves and two emergency stop switches, optionally with OPL 02 as well as demand locking BV2. Day/night access function, including activation using key switch (demand locking necessary). Transport opening. Electrical equipment Infrared (except for C02, C03 standard) or radar motion detectors for automatic starting. Buttons for disabled users 70 x 70 in console 4 with wheelchair symbol, alternative to the SA1 buttons for disabled users. Different consoles. Key-operated push button or key switch. Operating panels. Emergency stop switches with seal cap, instead of the existing ones. Two pre-sensors for heavy rotating units, for additional safeguarding of persons requiring special protection. Sensor strips to automatically reduce the rotating speed when someone has been detected by the sensors. Lighting by 2, 3 or 4 LEDs. Lighting by 3, 4, 6, 8, 9, 12 LEDs. All dimensions in mm = Standard Safety device 12
Construction Increase passage height. Increase upper part of body. CSD-C01 CSD-C02 Insulation of outer upper part of the body. Water tray or waterproof cover of outer part of body, made of light metal. P4A glazing, impact-resistant glazing of body and door leaves. Heater band with thermostat (outside only) at floor rail level. Air curtain unit. Floor element; stainless steel floor ring for pre-installation. Stainless steel tub for the floor ring in the outer half (for drainage). Stainless steel plate, may be perforated, to apply floor covering. Stainless steel plate for floor element. Clamping rail for fixing on-site sealing foil, measure X = 150 or larger. Charcoal-grey coir floor covering (rep). Carpet as cleaning zone. Finish AISI 304 stainless steel, satin finish or S8 mirror polished. E6 anodised in colour. Glass or metal body and door leaves powder coated in custom colour. Function Dual drive upgrade. Emergency exit function including dual drive. Electrical equipment Battery pack for the inside door leaf pair. Radar motion detectors for automatic starting. Different consoles. Key-operated push button or key switch. Light curtain on inner door radius to protect the passage area (required for people in need of special protection). Emergency stop switch for installation in the mullion or for on-site installation in the area of the circular sliding door near drive or redundant drive. Lighting by 2, 3, 4, 6, 8 LEDs. Safety device Console 1 plastic in RAL 9006 e.g. for contactless reader Console 4 stainless steel satin finish Console 5 stainless steel satin finish Release button OPL 01 OPL 02 OPL 03 Key-operated push button width height depth 94 mm 94 mm 65 mm width height depth 118 mm 93 mm 60 mm width 118 mm height 164 mm depth 60 mm 13
RDR rotating units Rotating unit T25 120 Outside diameter: Ø 2100 to Ø 3300 1. Toughened safety glass 2. Safety strip 3. Sealing brush 4. Safety strip (for SA1) 5. Finger protection strip (for SA2, N0 and N0-LR) Rotating unit without centre column. Profile depth 25 mm. Rotating unit T25 180 Outside diameter: Ø 2100 to Ø 3300 1. Toughened safety glass 2. Safety strip 3. Sealing brush 4. Safety strip 5. Finger protection strip (for SA2, N0 and N0-LR) Rotating unit without centre column. Profile depth 25 mm. Rotating unit T40 120 Outside diameter: Ø 2100 to Ø 3700 1. Toughened safety glass 2. Safety strip 3. Sealing brush 4. Safety strip (for SA1) 5. Finger protection strip (for SA2, N0 and N0-LR) Rotating unit with centre column. Profile depth 40 mm. Rotating unit T40 180 Outside diameter: Ø 2100 to Ø 3700 1. Toughened safety glass 2. Safety strip 3. Sealing brush 4. Safety strip (for SA1) 5. Finger protection strip (for SA2, N0 and N0-LR) Rotating unit with centre column. Profile depth 40 mm. All dimensions in mm 14
Rotating unit T56 120 escape route Outside diameter: Ø 2100 to Ø 3700 1. Toughened safety glass 2. Safety strip 3. Sealing brush 4. Safety strip 5. Finger protection strip Rotating unit with centre column and emergency exit function. Profile depth 56 mm. Rotating unit T56 180 escape route Outside diameter: Ø 2100 to Ø 3700 1. Toughened safety glass 2. Safety strip 3. Sealing brush 4. Safety strip 5. Finger protection strip Rotating unit with centre column and emergency exit function. Profile depth 56 mm. Rotating unit T56 120 escape route Outside diameter: Ø 3920 to Ø 4920 1. Toughened safety glass 2. Safety strip 3. Sealing brush 4. Safety strip 5. Finger protection strip Rotating unit with centre column and emergency exit function. Profile depth 56 mm. Rotating unit T56 180 escape route Outside diameter: Ø 3920 to Ø 4920 1. Toughened safety glass 2. Safety strip 3. Sealing brush 4. Safety strip 5. Finger protection strip Rotating unit with centre column and emergency exit function. Profile depth 56 mm. All dimensions in mm 15
Floor elements for RDR types Floor element without stainless steel plate for sealing Floor element with stainless steel plate for sealing, measure X = 150 or larger Detail: floor element with sealing foil at the outer radius, measure X = 150 or larger 1. Sealing foil 300 mm (self-adhesive) or on-site foil 2. Stainless steel fastening clamp 3. Continuous stainless steel ring (25 mm) 4. Clamping rail with M8 welding stud 5. Adjusting plate X: installation depth superstructure FFL to superstructure SFL Detail: floor element with sealing foil in facade axis 1. Sealing foil 300 mm (self-adhesive) or on-site foil 2. Stainless steel fastening clamp 3. Stainless steel strut for connection and support 4. Floor bearing fixing 5. Adjusting plate X: installation depth superstructure FFL to superstructure SFL All dimensions in mm 16
Drive box for floor pit, measure X = 350 or larger Stainless steel plate for floor element Stainless steel plate for floor element perforated (for drainage) Floor element with water tray All dimensions in mm 17
Alternative bodies for RDR types Body with floor element Body with dustproof cover Body with waterproof cover Body with water tray and spout All dimensions in mm 18
Body with night closure Body glass ceiling with frame Body glass ceiling with point fixing Body glass ceiling without frame If the RDR-S01 is installed in the facade axis, we recommend providing additional weather protection using a roof with an appropriate downward slope All dimensions in mm 19
RDR connections Example of 200 wall connection, top Example of 200 wall connection, side Underfloor drive All dimensions in mm 20
Installation diagrams Example of Talos RDR-E01 (rotary cycle 180 ), with emergency exit door according to DIN EN 179 Key Griff Durchgangshöhe DH Gesamthöhe GH System-ø Außen-ø Außen Handle Passage height PH Total height TH System ø Outside ø Outside All dimensions in mm 21
Installation diagrams Example of Talos RDR-E01 (rotary cycle 120 ), with night closure Key Kabelzuleitung Durchgangshöhe DH Gesamthöhe GH Griff Innen System-ø Außen-ø Außen Cable supply line Passage height PH Total height TH Handle Inside System ø Outside ø Outside All dimensions in mm 22
Example of Talos CSD-C01 with wall connection to on-site facade Key Ansicht: Türflügel geschlossen Kabelzuleitung Durchgangshöhe DH Gesamthöhe GH Einbautiefe Maß X Innen Öffnungswinkel DB System-ø Außen-ø Außen View: door leaf closed Cable supply line Passage height PH Total height TH Installation depth Measure X Inside Opening angle PW System ø Outside ø Outside 23
kaba.com Kaba Gallenschütz GmbH, www.kaba.com/pas, subject to modifications 31691EN 07 2015