2420 SG CID PL DEC18 Pgs 1-33_AW.qxp_Layout 1 05/12/2018 15:21 Page 1 DECEMBER 2018 EDITION Cast Iron drainage, rainwater pipe and gutter systems Ensign EEZI-FIT Timesaver VortX Classical Rainwater TRADE PRICE LIST
Saint-Gobain PAM is the premier supplier of ductile iron and cast iron products to the UK's key utilities, telecoms, highways, civil engineering, construction and housing companies. We lead markets in the supply of: Ductile iron water and sewer pipes, fittings, valves and couplings and adaptors Ductile iron access covers & gratings Cast iron soil and drainage and rainwater systems Across each of these categories we can provide: Innovative products and processes Specialist engineering services Total technical support With Saint-Gobain PAM UK and the PAM brand, you can be assured of Quality, Innovation and Technical Expertise at all times. TECHNICAL ADVISORY SERVICE Saint-Gobain PAM offers a comprehensive technical advisory service. The technical team can provide: Complete CAD drawing take-off detailing bill of materials Installation advice Site support Tool-box training Telephone hotline: 01952 262529 Fax: 01952 262592 Email: technical.soildrain.uk.pam@saint-gobain.com SEE PAGES 6-7 2 Trade Price List December 2018 Cast iron drainage, rainwater pipe & gutter systems
TRADE PRICE LIST DECEMBER 2018 EDITION Contents Page 08 Ensign Page 30 EEZI-FIT Page 34 Timesaver Page 56 VortX Page 70 Classical Rainwater Ensign EEZI-FIT Timesaver VortX Classical Rainwater 3
Saint-Gobain PAM UK specialises in the manufacture of cast iron above and below ground drainage systems, for Commercial, Public and Residential buildings. LEADING DRAINAGE S We lead markets in the supply of: Cast iron soil and rainwater systems, and suspended pipework in basements and car parks and buried under building drainage Ductile iron water and sewer pipes, fittings, valves & couplings & adaptors Ductile iron access covers & gratings Across each of these categories we can provide: Innovative products and processes Specialist engineering services Total technical support INNOVATION With Saint-Gobain PAM UK and the PAM brand, you can be assured of Quality, Innovation and Technical Expertise at all times. QUALITY ASSURANCE All parts of our operation have audited quality management systems and fully satisfy ISO 9001:2008. The majority of products are third-party assessed and approved against all relevant worldwide regulations and standards. SUSTAINABILITY We continually invest time, energy and expertise to create an extensive range of innovative solutions which are easy to install, simple to joint and simply offer better value for money in terms of total life costs. COMPLETE SERVICE GLOBAL EXPERTISE Complete service integration. Saint-Gobain PAM UK is the UK arm of Saint-Gobain PAM, the international pipelines company, which employs around 9000 people and generates annual sales of 1.2 billion in over 120 countries. Together they form part of the Saint-Gobain group, one of the world's leading multinational organisations. TECHNICAL SUPPORT With the international support of parent company Saint-Gobain, we are able to offer unrivalled technical support, a total solution approach and unparalleled quality and innovation. A UK-based business, with two foundries and a distribution centre in the Midlands, we combine international reach with local, specific solutions across all of our customers. 4 Technical Enquiries: +44 (0)1952 262529 Email: technical.soildrain.uk.pam@saint-gobain.co.uk
Trade Price List December 2018 Cast Iron drainage, rainwater pipe & gutter systems Proud of our UK Manufacturing Heritage Saint-Gobain PAM UK at its foundry in Telford, Shropshire, the birthplace of cast iron production in the UK, remains at the forefront of design and manufacturing of high-performing cast iron above and below ground drainage systems for commercial, public and residential buildings. PAM France manufactures the 3m pipes and the Telford site manufactures the fittings and ductile iron couplings and brackets to complete the ranges. SYSTEM, AND SUSTAINABILITY ACCREDITATION BS EN ISO 9001:2015 BS EN ISO 14001:2004 OHAS 18001 CEMARS BES6001 Quality Management Systems Kitemark Licence: FM12908 Environmental Management Systems Kitemark Licence: EMS83973 Health & Safety Management Systems Kitemark Licence: OHS 570684 Certified Emissions Measurement And Reduction Scheme Certificate Number: 2016053J CEMARS certification demonstrates the Company s commitment to measuring, managing and reducing greenhouse gas emissions in a robust and credible way. Responsible Sourcing of Construction Materials Kitemark Licence: BES600635 Product Certification BS EN877: 1999 +A1:2006 Ensign/EEZI-FIT Cast iron pipes and fittings, their joints and accessories for the evacuation of water from buildings. Requirements, test methods and quality assurance. Kitemark Licence: KM51733 BS416 part 2: 1990 BS437: 2008 Timesaver Soil Discharge and ventilating pipes and fittings, sand-cast or spun in cast iron. Specification for socketless systems Kitemark Licence: KM06979 Timesaver Drain Specification for cast iron drain pipes, fittings and their joints for socketed and socketless systems Kitemark Licence: KM06980 FM12908 EMS83973 Sales Enquiries: +44 (0)115 930 0681 Email: sales.uk.pam@saint-gobain.co.uk www.saint-gobain-pam.co.uk 5
Saint-Gobain PAM UK aims to ease the burden on developers, specifiers and contractors in the early stages of construction by providing two levels of BIM library and supporting elements. The new releases include a full-data object library, a platform that provides supporting information and free individual BIM files of all products and systems. These include a BS EN877 Generic Cast Iron content package for use in early design stages, with fittings parametrically modelled, and in standard geometric settings. The files contain only the most vital information, reducing the time and effort required to create early stage plans. These data-light designs can also be overwritten with the full data specification libraries without issue, speeding up later stages of development that require more detailed plans streamlining conversion from design to as built work flow. The PAM BIM Libraries are designed to aid the data transition between Public Health consultant s and Main Contract MEP design engineers, creating a leaner process that reduces design time. As the transitions usually require more explicit data being added to models, Saint-Gobain PAM are also currently creating plugins to quickly add the full data, either automatically by system type, or through floor level and manual area selection. By providing small file sizes in the generic content, it will make it easier for early stage specification in BIM and will speed up the whole planning process; this in turn will create measurable cost and time savings for our customers. Available content NEW NEW BS EN 877 CAST IRON GENERIC BIM LIBRARY BS 437 CAST IRON GENERIC BIM LIBRARY ENSIgN SOIL & EEZI-FIT BIM LIBRARY EN877 ENSIgN DRAIN BIM LIBRARY EN877 TIMESAvER DRAIN BIM LIBRARY BS437 BIM SERVICES PAM UK has been developing BIM level 2 libraries in Revit for its ranges of soil and drain products. Contact the PAM UK BIM manager: Matthew Hassall Telephone: 01952 262561 Mobile: 07815 800304 Email: matthew.hassall@saint-gobain.com 6 Technical Enquiries: +44 (0)1952 262529 Email: technical.soildrain.uk.pam@saint-gobain.co.uk
Trade Price List December 2018 Cast Iron drainage, rainwater pipe & gutter systems NEW REGISTRATION REQUIRED TO KEEP UP TO DATE WITH NEW CONTENT/REVISED FULL PARAMETRIC PIPE SYSTEMS GENERIC AND FULL DATA ACCESS TO DESIGN AID PLUGINS ACCESS TO GUIDANCE VIDEOS AND HOW TO? FAQS NEW Coming early 2019 New Converter Plugin BS EN 877 CAST IRON GENERIC LIBRARY Generic cast iron content > Full range of Cast Iron fittings > All families have real geometry > Generic coupling with fixing zone visibility > All fittings have constrained couplings which can be turned on/off > No Manufacturer data > All files are lightweight 500KB max. SG PAM UK CAST IRON ENSIGN SOIL LIBRARY Ensign soil full data content > The Saint-Gobain Conversion Plugin will overwrite the generic content to the Ensign content > Minor modifications to project design stages > Time saving design for main contract BIM Engineers. Check for availability. Sales Enquiries: +44 (0)115 930 0681 Email: sales.uk.pam@saint-gobain.co.uk www.saint-gobain-pam.co.uk 7
Trade Price List December 2018 Cast Iron drainage, rainwater pipe & gutter systems Ensign cast iron drainage system Ensign is the market leading cast iron above and below ground drainage system kitemark approved to BS EN877, providing complete drainage solutions, transporting fluid waste and rainwater through the building out and beyond. Above Ground Applications: Red coated Sanitary soil (Foul) drainage Vent & waste Rainwater pipework The Ensign cast iron system is first choice for commercial, public and residential buildings, particularly medium to high rise buildings which require robust and safe solutions for basements and lower levels to the vertical risers. Major Benefits: Ensign is fire rated A1 the safest rating achievable Ensign requires no special fire protection saving time and cost > Will not fuel a fire > Minimal smoke > Will not collapse > Will not produce molten droplets unlike HDPE Acoustically cast iron is the quietest material on the market > Out performs acoustic plastic systems by up to 8 db(a) > Saves on acoustic insulation Expansion co-efficient is virtually the same as concrete > No requirement for expansion joints like for HDPE > Simplifies installation Less bracketary saving installation cost > Simple brackets no complicated rail systems The best material in consideration to the Environment > Longevity to last the life of the building averaging: > Sanitary soil use in excess of 60 years > Rainwater systems in excess of 80 years > Manufactured from up to 97% recycled content > 100% recyclable at the end of its long life continually. Ensign Above Ground Pipe 8 Technical Enquiries: +44 (0)1952 262529 Email: technical.soildrain.uk.pam@saint-gobain.co.uk
Ensign EEZI-FIT Timesaver VortX Classical Rainwater Why Ensign Cast Iron? 50 600mm diameter range High quality pipes manufactured by PAM in France using the De Lavaud process > Pipe has greater impact and crush resistance > Its surface hardness is reduced making it much easier to cut on site. High performing ductile iron couplings with built-in electrical continuity > New grip collars that can overclamp the iron coupling to give additional pressure performance at sensitive areas (see page 29) Strong robust ductile iron brackets > Acoustic dampeners can be fitted for the ultimate acoustic performance The most comprehensive range of swept branches in compliance with BS EN 12056 part 2 and Public Health best practice The most comprehensive range of fittings in cast iron for waste connection > Compression fit and BSP threaded boss pipes > Single and double swept long tail branches with boss options > Multi-waste manifold connectors > New multi-waste manifold for low level connection > 6" x 2" BSP inlets > Long spigot that accommodates up to 400mm floor slab. Sales Enquiries: +44 (0)115 930 0681 Email: sales.uk.pam@saint-gobain.co.uk www.saint-gobain-pam.co.uk 9
Trade Price List December 2018 Cast Iron drainage, rainwater pipe & gutter systems Below Ground Applications: Grey coated Underbuilding drainage often requiring to be encased in concrete First choice in areas: Unstable land/soil containing methane gases/shallow trenches Bridge drainage. Benefits Robust proven material fit and forget > Superior crushing strength of cast iron > The best material to cope with the high temperatures of the concrete curing process during encasement Flexible mechanical couplings to accommodate ground movement Natural longevity. Why Ensign Cast Iron? 100mm to 600mm diameter range Range of couplings > Ductile iron mechanical up to 300mm > Cast iron push-fit couplings in 100 and 150mm for fast pipe laying > High performance couplings 400-600mm Ensign drain pipes have an external Zinc coat applied in line with BS EN877. Internally, the Ensign pipes are epoxy lined to an average thickness of 250 microns virtually twice that of competitor systems. Ensign Below Ground Pipe Ensign Drain Couplings 10 Technical Enquiries: +44 (0)1952 262529 Email: technical.soildrain.uk.pam@saint-gobain.co.uk Ensign Drain Push-fit Couplings
Ensign EEZI-FIT Timesaver VortX Classical Rainwater Performance Standards BS EN877: 1999 +A1:2006 KM 51733 kitemark certification for above and below ground use Below ground pipe to standard BS EN877 require the application of an external Zinc layer of 130gr/m 2. CE MARK Ensign is manufactured to BS EN877 a European harmonised standard and as such under the construction products directive must be CE marked by Law. The manufacturer must make a product declaration of performance in conjunction with BS EN877 (DoP), and must be fire rated after a test carried out at an accredited Fire Research establishment. Ensign has been tested at EXOVA in Warrington and rated A1 The Ensign DoP is available on the PAM website. BS EN 14366:2004 Laboratory measurement of noise from waste water systems Ensign has been tested at the Fraunhofer Institute in Germany and has the lowest level of acoustic measurement when using PAM acoustic brackets. Fire Performance Ensign acoustic bracket Pipework being acoustically tested Reaction to fire category A1 and will give up to 4 hours integrity Fire resistance > Building Regulations Document B No special protection required > ASFP Red Book guidance Pipe penetration between floors and walls made with a mortar based material. For more information on performance standards and safety guidance visit our website: www.saint-gobain-pam.co.uk Alternatively contact technical enquiries on 01952 262529 or email technical.soildrain.uk.pam@saint-gobain.co.uk Sales Enquiries: +44 (0)115 930 0681 Email: sales.uk.pam@saint-gobain.co.uk www.saint-gobain-pam.co.uk 11
Trade Price List December 2018 Cast Iron drainage, rainwater pipe & gutter systems Ensign Soil and Drain System Installation Guidance BS EN12056 parts 2 & 3 > Use of swept branches particularly for foul discharge stacks > Long radius bends at the base of stacks Pipe pressures > Ensign is a gravity drainage system > Any references to coupling performance pressures are based on accidental hydrostatic tests based around coping with accidental blockages Also note the relevance of restrained and unrestrained terminology. Example: 100mm diameter Ensign couplings under BS EN877 standard must be capable of withstanding 5 bar accidental static pressure restrained which means fully bracketed. Check Ensign catalogue BS EN752 > Underbuilding drainage for Ensign Drain. Installation tools and guidance Recommended Pipe Cutters > Scorp 220 cutter type (accuracy/lower noise/reduced sparks) > Standard Chop saw Coupling assembly > Hand-held cordless impact driver > Rachet spanner EF100 > Torque wrench set at 20 Nm Guidance: The ductile iron couplings should be tightened until a suitable resistance is achieved note they do not need to be completely tightened until the two halves are touching usually leave a 2-3mm gap (see page 29) Overpainting > The coating for Ensign is regarded as a primer, therefore when installed in exposed external areas the system should be overpainted. The system should be gently rubbed down with a suitable abrasive paper to provide a good adhesive key for the finished coat Coating cut ends > In most cases it is not necessary to re-coat the pipe ends with touch-up paint. However, where there may be potentially a higher risk of more aggressive fluids passing through the cast iron drainage system (i.e. Coca Cola, acid rain, acids or strong alkaline) it is recommended the cut ends be protected to the same standard as the internal coating of the pipe. In this instance PAM recommend: > EXTREM 1K Supplied in 0.5kg tins a new quick drying touch up paint air dry in 15 minutes to ensure time is not wasted. 12 Technical Enquiries: +44 (0)1952 262529 Email: technical.soildrain.uk.pam@saint-gobain.co.uk
Ensign EEZI-FIT Timesaver VortX Classical Rainwater Customer Service SAINT-GOBAIN PAM UK CUSTOMER CHARTER Your 1st Choice through the actions of our people Passionate about customer satisfaction Enterprising in support of our customers aims Helpful, responsive, friendly personal contact. Professional and enterprising in helping you OUR PEOPLE COMPLAINTS Trustworthy by keeping our promises We usually get things right. If we don t, let us know and SALES ENQUIRIES we will put Telephone: 0115 930 0681 it right Fax: 0115 930 0648 Email: sales.uk.pam@saint-gobain.com On time, in full, error free but if we can t, we ll let you know and offer a solution DELIVERY CUSTOMER CHARTER We will ask you how you think we are performing and commit to improving LISTENING Ensign Soil and Drain CUSTOMER SERVICE TEAM Email: customerorders.uk.pam@saint-gobain.com Website: www.saint-gobain-pam.co.uk Delivery timescales Saint-Gobain PAM UK are planning to provide a product availability structure for all its products, by product ranges, to enable contractors and distributors to plan supply more effectively on projects. The first phase is now being introduced on the Ensign Soil and EEZI-FIT above ground ranges which are categorised as follows and are shown against each product in the price list tables. Category Description Within (working) Days A B C Products manufactured for ex-stock availability. Any out-of-stock situation should be quickly resolved. 5 Products manufactured and a stock level will be held based on average demand. 5-15 Products generally of lower demand some stock may be held or made to order. 15-30 Sales Enquiries: +44 (0)115 930 0681 Email: sales.uk.pam@saint-gobain.co.uk www.saint-gobain-pam.co.uk 13
Trade Price List December 2018 Cast Iron drainage, rainwater pipe & gutter systems Ensign Soil and Drain Typical assembly components NEW Ensign Rodding Branches (Patent applied for) The new value engineered one piece solution Ensign Rodding Branches have been developed to simplify and save significant installation time when installing horizontal cast iron pipework. Features and Benefits Minimum 50% quicker installation time to complete the section Integrated rodding eye cap (capable up to 5 bar pressure) Integrated fixing lugs for self supported brackets Available in 100mm diameter in 88 and 45 variances Developed through collaboration with plumbing installers the new rodding branches combine up to 8 components into one fitting. The rodding branches would be installed at particular points in the pipe run: 1. At changes in direction 2. When the Vertical pipe stack connects to the horizontal run under the floor below. Components assembled Traditionally, at the end of the pipe run, just after the change in direction, or connection to the vertical pipe stack, a short length of pipe (typically 200mm in length) would be added and then blanked off to allow rodding access. Essentially this added length of pipe would allow a fixing bracket to support the pipework and be positioned the other side of the vertical pipework core hole. (Illustrated in the in situ bottom image) Here is a typical list of Ensign components when the vertical pipework connects to the horizontal pipe run (see top left image or see typical assembly components): 1 x 100mmØ x 100mm x 45 single branch EF006 1 x 100mmØ x 200mm long section of pipe EP000 1 x 100mmØ blank end EF070 3 x 100mmØ couplings EC002 1 x 100mmØ x 45 bend EF002 1 x 100mmØ fixing bracket EF048 New 88 Rodding Branch The new 88 rodding branch combines all into one unit significantly saving installation time: Couplings assembly and cutting a short length of pipe. Labour time saved would be approx 1 hour per section (subject to level of skill and source of labour rates). Typically, in multi-story buildings with basements this arrangement would be repeated throughout the horizontal sections, presenting the installer with significant labour saving potential. New 88 Rodding Branch in situ 14 Technical Enquiries: +44 (0)1952 262529 Email: technical.soildrain.uk.pam@saint-gobain.co.uk
Trade Price List December 2018 Cast Iron drainage, rainwater pipe & gutter systems In addition, the end cap to the new rodding branch has been designed to withstand up to 5 bar static pressure to accommodate end thrust pressures which are sometimes required. This saves further the requirement for a grip collar fitting that would overclamp the standard blank end installed to allow rodding. Finally, the fitting includes a fixing lug to be able to secure the unit to the slab without the need for a full bracket component. SEE PAgE 20 NEW Ensign Corner branch swept radius The double radius corner branch is commonly used to service WC connections in corner sanitary system applications. This new fitting also ensures Ensign fully conforms to the design guidance of BS EN 12056-2 to utilise swept radius branches when servicing foul discharge stacks. SEE PAgE 22 Ensign Soil and Drain NEW Ensign Strap-on-Boss fittings The strap-on-boss provides a simple solution for fitting a 50mm copper or plastic waste pipe to an existing cast iron soil pipe in 70mm, 100mm and 150mm diameter BS EN 877 pipework. The strap-onboss fitting can also provide a cost effective solution for low waste connections at floor level without the need for a special fitting. SEE PAgE 24 NEW Ensign corner manifold New corner manifold coming early 2019 capable of corner installations extend spigot up to 400mm 3 x 2 BSP direct waste inlets WHAT S NEW? Look out for NEW throughout this price list to find the new products Sales Enquiries: +44 (0)115 930 0681 Email: sales.uk.pam@saint-gobain.co.uk www.saint-gobain-pam.co.uk 15
Trade Price List December 2018 Cast Iron drainage, rainwater pipe & gutter systems Ensign Soil and Drain NOMINAL ABOvE ground DELIvERY SERvICE CAT. BELOW ground 3m Pipe EP000 ED000 50 35 12.5 A 156363 70.58 70 41 17.0 A 156455 81.66 100 38 24.5 A 156563 97.16 155349 126.84 125 23 34.3 C 156736 155.88 150 20 41.0 A 156827 192.49 155414 252.71 200 10 67.4 B 156951 321.66 155448 427.19 250 8 97.3 B 157049 449.40 155476 628.03 300 6 126.8 C 157114 559.66 155493 782.17 Pipe caps available 400 1 177.7 C 157171 1,099.13 155508 1,267.19 for onsite storage 500 1 244.9 C 157187 1,366.94 155511 1,471.39 600 1 321.9 C 157203 1,666.68 175630 1,808.68 Two Piece Ductile Couplings (*No Continuity Nibs on ED001 Couplings) EC002 ED001* 300mm diameter is 4 piece 400mm, 500mm, 600mm diameter couplings see below EC002HP Push-fit Drain Couplings 50 32 0.6 A 156398 10.58 70 27 0.7 A 156493 11.66 100 20 1.1 A 156634 15.15 155369 21.39 125 12 0.9 C 156777 18.81 150 8 1.7 A 156888 30.38 155433 43.69 200 4 3.7 A 156998 67.90 155462 97.36 250 1 4.4 B 175552 97.25 175591 123.94 300 1 6.5 B 175510 112.55 175592 141.96 ED004 100 1 1.5 175622 23.42 150 1 2.5 175623 45.98 Grip Collars **To overclamp ductile iron coupling EC002 To give 5 bar unrestrained Will overclamp all sizes Stainless Steel EC002NG Couplings EC002GC 50 1 0.5 B 221261 33.93 70 1 0.7 B 221268 39.66 **100 1 0.9 B 220750 52.61 **150 1 1.2 B 221270 75.12 **200 1 1.7 C 221271 103.38 High Performance Stainless Steel Grip Couplings (Capable of withstanding 5 bar pressure) EC002HP Type 1 Type 2 100 1 1.4 B 266168 115.30 227336 186.64 150 1 3.2 B 265570 180.30 227338 308.19 200 1 5 B 265573 349.95 227339 417.02 250 1 8.6 B 265575 396.60 227340 564.41 Type 1 304 Stainless Steel casing alloy steel fasteners Type 2 304 stainless steel casing 316 stainless steel fasteners For use above and below ground 300 1 10 B 265576 515.10 227351 577.24 400 1 14 B 266169 575.00 227352 640.71 500 1 16 B 266170 825.00 227353 944.48 600 1 19 B 266171 925.00 227354 1,008.53 High Performance Stainless Steel W5 Non-Grip Couplings (Capable of withstanding 5 bar pressure) EC002HP Type 1 Type 2 100 1 1.6 B 266172 100.00 228257 165.02 150 1 2.5 B 266173 150.00 228259 195.95 200 1 3 B 266174 200.00 228260 256.15 250 1 3.5 B 266175 250.00 228271 289.01 Type 1 304 Stainless Steel casing alloy steel fasteners Type 2 304 stainless steel casing 316 stainless steel fasteners For use above and below ground 300 1 7 B 266176 300.00 228272 314.95 400 1 9 B 266177 350.00 226261 385.14 500 1 11 B 266178 400.00 226262 454.76 600 1 13 B 266179 450.00 228273 472.45 16 Technical Enquiries: +44 (0)1952 262529 Email: technical.soildrain.uk.pam@saint-gobain.co.uk
Prices exclude VAT Made to order Above Ground Only (see page 13) Ensign EEZI-FIT Timesaver VortX Classical Rainwater Stainless Steel couplings NOMINAL ABOvE ground DELIvERY SERvICE CAT. BELOW ground EC002NG 50 1 0.2 B 210424 10.58 70 1 0.3 B 210425 11.66 100 1 0.5 B 210427 15.15 125 1 0.6 C 210428 18.81 150 1 0.7 B 210429 30.38 200 1 0.8 B 210430 67.90 250 1 0.9 B 228759 97.25 300 1 1.0 B 228771 112.55 Ensign Soil and Drain Ductile Iron Pipe Brackets EF048 ED048 50 48 0.3 A 156408 9.56 70 30 0.5 A 156505 9.56 100 30 0.6 A 156646 11.04 175593 12.79 150 16 0.8 A 156898 20.45 175594 24.22 200 8 1.5 B 177745 75.84 177743 92.30 Ductile Iron Pipe Bracket Fitted with Acoustic Dampener Tested to BS EN 14366:2004 EF048AD 50 1 0.5 B 199881 18.59 70 1 0.6 B 199882 18.59 100 1 0.7 A 199883 19.82 150 1 1.0 B 199884 24.78 Ductile Iron Pipe Bracket (Double Braced) EF049 100 1 0.8 B 177744 12.10 Vertical Mild Steel Bracket EF048MS 125 1 1.1 B 192259 19.26 Stand Off Mild Steel Brackets Rubber Lined Steel Brackets 88 Short Radius Bends NEW EF048MS 200 1 2.0 B 192414 30.44 250 1 2.5 B 192260 41.95 300 1 2.7 C 192261 46.21 400 1 3.3 C 192362 68.10 EF048MSL 50 1 0.1 B 251197 5.09 70/75 1 0.2 B 251198 7.78 100 1 0.3 B 251199 9.31 150 1 0.4 B 251201 13.59 200 1 0.6 C 251202 24.08 250 1 1.6 C 251203 39.82 300 1 1.8 C 251204 79.46 EF002 50 1 0.7 A 191437 18.29 70 1 1.3 A 191442 20.59 100 1 1.9 A 191447 24.38 125 1 3.2 C 191454 35.92 150 1 4.4 A 191459 43.79 200 1 9.8 C 191462 130.37 250 1 17.3 C 191463 254.37 300 1 27.4 C 191431 357.81 400 1 72.7 C 265224 665.32 Sales Enquiries: +44 (0)115 930 0681 Email: sales.uk.pam@saint-gobain.co.uk www.saint-gobain-pam.co.uk 17
Trade Price List December 2018 Cast Iron drainage, rainwater pipe & gutter systems Ensign Soil and Drain 69 Short Radius Bends 67 Short Radius Bends NOMINAL ABOvE ground DELIvERY SERvICE CAT. BELOW ground EF002 50 1 0.6 C 191436 18.29 70 1 1.2 C 191441 20.59 100 1 2.1 C 191446 24.38 150 1 4.2 C 191458 43.79 EF002 200 1 7.8 C 156968 130.37 250 1 14.7 C 157067 254.37 300 1 20.0 C 157132 357.81 45 Short Radius Bends 30 Short Radius Bends 15 Short Radius Bends 45 Medium Radius Bends EF002 ED002 50 1 0.6 A 191435 18.29 70 1 0.9 A 191440 20.59 100 1 1.4 A 191445 24.38 191765 28.72 125 1 2.3 C 191452 35.92 150 1 3.0 A 191457 43.79 191766 51.52 200 1 6.8 B 191461 130.37 191767 149.92 250 1 10.9 B 191464 254.37 191879 298.21 300 1 18.7 C 191432 357.81 191880 404.71 400 1 35.0 C 192335 923.81 192370 963.98 500 1 53.0 C 192376 1,449.50 192382 1,539.30 600 1 92.0 C 192377 1,635.51 192383 1,783.02 EF002 ED002 50 1 0.5 C 191434 18.29 70 1 0.7 C 191439 20.59 100 1 1.5 A 191444 24.38 191768 28.72 150 1 3.2 B 191456 43.79 191769 51.52 200 1 7.0 C 155933 130.37 265382 156.44 250 1 9.7 C 155948 254.37 265380 305.25 300 1 15.5 C 155960 357.81 265379 465.15 EF002 ED002 50 1 0.4 C 191433 18.29 70 1 0.7 C 191438 20.59 100 1 1.3 A 191443 24.38 191770 28.72 150 1 2.5 C 191455 43.79 191771 51.52 200 1 4.6 C 155932 130.37 265381 156.44 ED02M 100 1 3.5 191772 48.90 150 1 5.9 191773 121.68 88 Medium & Long Radius Bends EF02L ED02L 100 LR 1 4.8 A 191549 61.97 191774 67.07 150 MR 1 8.7 B 191550 177.64 191775 201.15 22 Long Radius Bends EF02L ED02L 100 LR 1 2.0 C 191548 45.70 191776 49.26 18 Technical Enquiries: +44 (0)1952 262529 Email: technical.soildrain.uk.pam@saint-gobain.co.uk
Prices exclude VAT Made to order Above Ground Only (see page 13) Ensign EEZI-FIT Timesaver VortX Classical Rainwater 88 Heel Rest Bends 88 Short Radius Bends with Rear Access NOMINAL ABOvE ground DELIvERY SERvICE CAT. ED007 100 1 5.7 192289 83.35 150 1 9.9 192290 205.03 EF005 BELOW ground 70 1 1.8 C 156472 39.92 100 1 3.3 A 156589 58.31 150 1 4.5 B 156845 102.59 Ensign Soil and Drain 88 Long Radius Bend with Rear Access EF05L ED05L 100 1 5.7 B 156607 75.43 191777 88.74 88 Medium Radius Bend with Rear Access EF05M ED05M 150 1 10.7 C 192357 183.25 192358 205.03 88 Long Tail Bend EF055 100 1 4.4 C 191567 47.17 45 Long Tail Bend EF055 ED055 100 1 4.0 C 191566 47.17 191778 50.23 88 Long Tail Double Bend EF054 70 1 3.1 C 191837 66.21 100 1 4.4 C 191838 73.04 88 Single Tee Branches (equal and unequal) EF006 50x50 1 1.0 B 191469 29.34 70x50 1 1.5 C 191472 31.00 70x70 1 1.7 B 191475 31.00 100x50 1 2.0 B 191479 42.51 100x70 1 2.3 C 191482 42.51 100x100 1 2.7 A 191485 39.48 125x100 1 4.0 C 191490 79.20 125x125 1 4.2 C 191492 85.23 150x100 1 4.6 B 191497 91.53 150x125 1 5.8 C 191499 105.82 150x150 1 6.0 C 191501 94.47 200x200 1 13.3 C 191505 255.09 250x250 1 22.6 C 191508 571.00 300x300 1 35.5 C 191466 734.71 Sales Enquiries: +44 (0)115 930 0681 Email: sales.uk.pam@saint-gobain.co.uk www.saint-gobain-pam.co.uk 19
Trade Price List December 2018 Cast Iron drainage, rainwater pipe & gutter systems Ensign Soil and Drain NOMINAL ABOvE ground DELIvERY SERvICE CAT. BELOW ground 69 Single Branches (equal and unequal) EF006 ED006 50x50 1 1.0 C 191468 29.34 70x50 1 1.4 C 191471 31.00 70x70 1 1.7 C 191474 31.00 100x50 1 2.2 C 191478 42.51 100x70 1 2.7 C 191481 42.51 100x100 1 2.7 C 191484 39.48 191781 46.37 150x100 1 5.1 C 191496 92.69 191851 108.99 45 Single Branches (equal and unequal) EF006 ED006 50x50 1 1.3 A 191467 29.34 70x50 1 1.8 C 191470 31.00 70x70 1 2.3 B 191473 31.00 100x50 1 2.4 A 191477 42.51 100x70 1 2.7 B 191480 42.51 100x100 1 3.7 A 191483 39.48 191782 46.37 125x70 1 4.0 C 191488 85.23 125x100 1 5.3 C 191489 79.20 125x125 1 5.6 C 191491 85.23 150x70 1 5.1 B 191494 92.69 150x100 1 5.7 B 191495 92.69 191783 108.99 150x125 1 8.0 C 191498 114.24 150x150 1 8.4 B 191500 94.47 191784 111.08 200x100 1 9.6 C 191502 237.84 191785 279.72 200x150 1 14.2 C 191503 244.62 191786 279.72 200x200 1 19.4 C 191504 264.89 191787 300.09 250x100 1 13.6 C 157073 303.93 250x150 1 17.3 C 157075 303.93 250x200 1 24.3 C 157078 379.93 265383 455.92 250x250 1 32.2 C 191507 569.68 191881 669.35 300x100 1 19.3 C 157138 501.49 264870 601.79 300x150 1 23.2 C 157140 501.49 264869 601.79 300x200 1 28.4 C 157141 531.88 300x250 1 37.2 C 157142 531.88 300x300 1 54.8 C 191465 734.71 191882 965.48 400x300 1 60.0 C 192339 1,202.58 192384 1,307.51 400x400 1 94.7 C 192336 1,646.84 192373 1,793.78 500x500 1 175.0 C 192378 2,450.04 192385 2,873.35 600x600 1 215.0 C 192379 3,174.79 192386 3,527.55 NEW 45 Rodding Branch EF009 100 1 7.0 A 266138 101.32 NEW 88 Rodding Branch EF009 100 1 7.6 A 266135 135.88 20 Technical Enquiries: +44 (0)1952 262529 Email: technical.soildrain.uk.pam@saint-gobain.co.uk
Prices exclude VAT Made to order Above Ground Only (see page 13) Ensign EEZI-FIT Timesaver VortX Classical Rainwater NOMINAL ABOvE ground DELIvERY SERvICE CAT. BELOW ground 88 Single Branch (Swept) EF06R ED06R 70x70 1 2.2 B 156539 37.76 100x50 1 2.4 B 156611 49.69 100x70 1 2.9 C 156612 49.69 100x100 1 3.3 A 156696 45.10 191788 51.32 150x100 1 7.6 B 156869 107.47 191789 173.01 150x150 1 11.7 C 156926 166.72 191790 174.42 200x150 1 13.0 C 156985 302.47 191791 355.76 200x200 1 21.0 C 157025 318.50 191792 374.68 88 Single Branch (Swept) with Rear Access EF07R ED07R 70x70 1 3.0 C 156540 55.35 100x50 1 3.2 C 156614 75.06 100x70 1 3.5 C 156621 75.06 100x100 1 4.3 B 156697 77.90 191793 88.32 150x100 1 8.9 C 156875 179.18 191794 186.40 150x150 1 13.0 C 156927 186.71 191795 186.83 88 Double Tee Branches (equal and unequal) EF010 100x50 1 2.2 C 155825 41.84 100x70 1 2.7 C 155826 50.15 100x100 1 3.3 B 191511 56.79 150x100 1 5.7 C 155907 127.05 Ensign Soil and Drain 69 Double Branches EF010 ED010 100x100 1 3.4 C 191510 62.43 191796 73.50 45 Double Branches (equal and unequal) EF010 ED010 100x100 1 4.7 B 191509 58.94 191798 66.81 150x100 1 8.0 C 191512 174.75 191799 194.02 150x150 1 12.6 C 191513 234.98 191800 262.40 200x200 1 25.3 C 191514 325.67 191801 337.58 88 Double Branches (Swept) (equal and unequal) EF010R ED010R 100x100 1 4.2 B 157643 57.65 185373 67.78 150x100 1 7.6 C 156862 221.01 191803 234.51 88 Long Tail Tee Branch EF056 100x100 1 5.1 C 191568 138.66 45 Long Tail Branches (equal and unequal) EF056 100x100 1 5.9 C 156723 138.66 150x150 1 18.3 C 156938 260.03 Sales Enquiries: +44 (0)115 930 0681 Email: sales.uk.pam@saint-gobain.co.uk www.saint-gobain-pam.co.uk 21
Trade Price List December 2018 Cast Iron drainage, rainwater pipe & gutter systems Ensign Soil and Drain NEW 88 Corner Branch (Swept) (equal) 88 Corner Branches (equal and unequal) NOMINAL ABOvE ground DELIvERY SERvICE CAT. EF035R 100x100 1 4.4 B 264739 103.40 EF035 BELOW ground 100x100 1 3.5 C 191558 103.40 150x100 1 7.1 C 155919 120.73 45 Corner Branch EF035 100x100 1 5.9 C 156716 103.40 88 Long Tail Corner Branch EF036 100x100 1 7.5 C 191559 162.92 90 Single Long Arm Branch 88 Long Tail Corner Branch EF008 100 1 6.0 C 156726 101.04 Access Pipes with Round Door EF014 ED014 50 1 1.6 B 191516 48.76 70 1 2.0 B 191517 51.59 100 1 3.1 A 191518 56.69 191805 63.84 150 1 6.2 B 191519 102.62 191806 106.25 Access Pipes with Rectangular Door Offsets EF015 ED015 100 1 7.2 B 191840 109.63 191807 127.40 125 1 9.0 C 191521 114.08 150 1 12.7 B 191841 171.66 191808 199.25 200 1 21.5 C 191522 340.96 191809 401.06 250 1 38.5 C 191523 536.49 191883 649.99 300 1 50.0 C 191520 669.22 191884 776.02 EF024 100x75 1 2.3 C 191526 37.49 50x130 1 1.5 C 191524 31.01 70x130 1 2.2 C 191525 47.04 100x130 1 3.8 C 191527 61.80 22 Technical Enquiries: +44 (0)1952 262529 Email: technical.soildrain.uk.pam@saint-gobain.co.uk
Prices exclude VAT Made to order Above Ground Only (see page 13) Ensign EEZI-FIT Timesaver VortX Classical Rainwater NOMINAL ABOvE ground DELIvERY SERvICE CAT. BELOW ground Taper Pipes EF028 ED028 70x50 1 0.5 B 191532 28.15 100x50 1 0.9 A 191533 33.10 100x70 1 0.9 A 191534 33.10 125x50 1 1.2 C 191842 33.29 125x70 1 1.5 C 191536 33.29 125x100 1 1.6 C 191537 33.29 150x50 1 1.7 C 191538 63.53 150x70 1 1.8 C 191539 63.53 150x100 1 2.2 B 191540 63.53 191810 68.58 150x125 1 2.0 C 191541 63.53 200x100 1 3.5 C 191542 103.18 191811 121.39 200x125 1 3.4 C 191543 103.18 200x150 1 3.9 C 191544 103.18 191812 121.39 250x100 1 5.9 C 191545 213.12 191889 249.83 250x150 1 6.1 C 191546 213.12 191886 249.83 250x200 1 6.1 C 191547 213.12 191892 249.83 300x150 1 10.4 C 191529 292.96 191890 347.77 PAM can manufacture large 300x200 1 11.0 C 191530 292.96 191891 347.77 diameter tapers to most 300x250 1 12.7 C 191531 292.96 191885 347.77 sizes i.e. 500x150 on 400x300 1 20.0 C 157163 366.64 155504 435.02 a made to order basis (Price on application) 500x400 1 27.9 C 157184 861.19 P.O.A. 600x500 1 C P.O.A. P.O.A. P Trap Plain (Supplied with support lug) EF034 ED034 100 1 4.5 A 156666 45.24 191815 53.27 Ensign Soil and Drain P Trap with Head Access (*Supplied without support lug only) EF037 ED037 50* 1 2.0 B 156419 69.11 70* 1 2.7 C 156518 69.11 100* 1 5.2 B 156667 74.83 182482 87.21 150* 1 11.6 B 156911 133.84 182483 148.51 Branch Trap EF080 100 1 10.2 C 191587 164.03 Stench Trap EF081 100 1 17.4 C 155841 340.67 150 1 38.0 C 155921 718.95 Asphalt Roof Connector EF073 100 1 2.1 C 191581 68.70 Movement Connector EF058 100 1 4.4 B 192304 87.27 150 1 7.8 C 156235 161.54 Sales Enquiries: +44 (0)115 930 0681 Email: sales.uk.pam@saint-gobain.co.uk www.saint-gobain-pam.co.uk 23
Trade Price List December 2018 Cast Iron drainage, rainwater pipe & gutter systems Ensign Soil and Drain Expansion Plugs Blank Ends Plain Blank Ends with 50mm Push-fit Connector Blank Ends D/T 2" BSP NOMINAL ABOvE ground DELIvERY SERvICE CAT. EF074 ED074 50 1 0.2 C 156374 32.18 70 1 0.4 C 191582 19.43 100 1 0.7 B 191583 24.20 191823 32.28 150 1 1.5 C 191584 43.42 191824 59.43 200 1 4.1 C 156961 142.19 250 1 6.0 C 157060 135.39 300 1 9.1 C 157125 275.65 EF070 ED070 50 1 0.2 A 191570 7.36 70 1 0.4 B 191571 7.78 100 1 0.8 A 191572 9.05 191818 10.67 125 1 1.1 C 191573 10.88 150 1 2.0 B 191574 13.07 191819 15.29 200 1 3.2 B 191575 57.74 191820 67.95 250 1 5.7 C 191576 117.99 191887 138.31 300 1 11.0 C 191569 190.85 191888 213.66 400 1 17.3 265190 302.37 265190 302.37 EF071 ED071 70 1 0.4 C 191577 17.35 100 1 1.0 C 191578 18.71 191821 21.99 150 1 1.6 C 191580 22.49 191822 26.47 EF071T BELOW ground 100 1 0.9 B 191579 21.98 Universal Connector EPDM EF071R 50x56/48/40 1 0.1 B 155759 15.05 (OD Dimensions) Blank End with Waste Push-fit Connector EF077 100x38/32 1 0.4 C 191585 16.80 NEW Strap On Boss Boss Pipes 50mm Compression Boss Pipe D/T 2" BSP EF133 70 1 1.1 C 265078 77.28 100 1 1.4 B 262891 62.64 150 1 1.6 C 262890 77.28 EF090 50 1 1.2 B 156371 41.21 70 1 1.6 B 156460 41.21 100 1 2.1 A 156573 50.39 150 1 3.8 C 156836 82.15 EF090T 100 1 1.7 B 191847 52.74 24 Technical Enquiries: +44 (0)1952 262529 Email: technical.soildrain.uk.pam@saint-gobain.co.uk
Prices exclude VAT Made to order Above Ground Only (see page 13) Ensign EEZI-FIT Timesaver VortX Classical Rainwater ABOvE ground BELOW ground NOMINAL DELIvERY SERvICE CAT. Boss Pipes 50mm Compression Opposed EF091 100 1 2.7 B 156575 65.10 150 1 4.4 C 192359 126.00 Boss Pipe D/T 2" BSP Opposed EF091T 100 1 2.2 C 191848 67.44 Ensign Soil and Drain Boss Pipe 50mm Compression at 90 EF092 100 1 2.9 C 191849 65.10 Boss Pipes D/T 2" BSPT at 90 NEW EF092T 100 1 2.0 C 191850 67.44 70 1 1.4 C 245545 76.47 Plastic Moulded Plug to blank off Boss Pipes (Supplied to merchants in bags of 10) EF093 50 10 C 192255 27.21 Manifold Connectors EF094 100 1 3.2 C 175626 100.50 150 1 6.0 C 175629 140.00 NEW Multi-Waste Manifold Connector 6 x 50mm BSP Inlets EF095 100 1 12.8 B 261138 188.95 150 1 17.3 B 261434 241.45 88 Single Long Tail Boss Branch Swept with 4 x 50mm Push-fit Bosses (2 Left Hand, 2 Right Hand) EF096 50 1 10.0 C 208644 239.40 Bosses require drilling out using a 51mm hole saw. Rubber grommets supplied in bags of 10. Product code 208205 (see page 33) See Page 33 for hole saw accessories. Sales Enquiries: +44 (0)115 930 0681 Email: sales.uk.pam@saint-gobain.co.uk www.saint-gobain-pam.co.uk 25
Trade Price List December 2018 Cast Iron drainage, rainwater pipe & gutter systems Ensign Soil and Drain 88 Double Long Tail Boss Branch Swept with 4 x 50mm Push-fit Bosses Stack Support Pipes *Complete with bracket and seal Stack Support Brackets supplied with rubber seal Stack Support Pipe Cantilever Arm Bracket NOMINAL ABOvE ground DELIvERY SERvICE CAT. EF097 50 1 11.0 C 208653 249.38 Bosses require drilling out using a 51mm hole saw. Rubber grommets supplied in bags of 10. Product code 208205 (see page 25) See Page 25 for hole saw accessories. EF050 70 1 1.8 C 191856 39.23 100 1 2.8 B 191562 43.65 125 1 3.6 C 191563 48.41 150 1 4.8 C 191564 69.07 200* 1 10.0 C 157014 312.68 250* 1 18.5 C 157097 474.01 300* 1 30.8 C 157160 611.76 EF051 70 1 1.1 C 191857 25.39 100 1 1.5 B 191843 34.87 125 1 1.7 C 191844 37.29 150 1 2.6 C 191845 50.54 EF052 BELOW ground 1 2.0 C 192329 29.26 Stack Support Pipe Cantilever Arm Bracket with Support (for stack support pipes 200 300mm in diameter) EF052 1 4.3 C 192330 76.25 Stack Support Pipe Console Bracket EF052 1 4.6 C 192331 70.05 Clamp to suit 192329 (Stack Support Pipe Cantilever Arm Brackets) and 192331 (Stack Support Pipe Console Bracket) EF052 1 0.3 C 192332 1.20 Transitional Connectors EF059 100 1 1.8 C 156650 51.61 150 1 4.2 C 156902 94.93 Ensign to Supersleve Connectors ED076 100 1 1.8 191813 42.06 150 1 4.6 191814 73.59 26 Technical Enquiries: +44 (0)1952 262529 Email: technical.soildrain.uk.pam@saint-gobain.co.uk
Prices exclude VAT Made to order Above Ground Only (see page 13) Ensign EEZI-FIT Timesaver VortX Classical Rainwater Bellmouth Gully Inlet Body Only Shown with plain grating, code is for body only NOMINAL ABOvE ground DELIvERY SERvICE CAT. BELOW ground ED060 100 1 2.4 191825 58.66 Bellmouth Gully Inlet Body with fitted Sealing Plate ED066 100 1 4.4 191852 79.50 Ensign Soil and Drain (Grey only) Bellmouth 150mm Gully Inlet Body Only ED060 150 1 2.9 191826 96.57 Shown with plain grating, code is for body only Bellmouth 150mm Gully Inlet Body with fitted Sealing Plate ED066 150 1 5.2 191853 135.74 (Grey only) 200mm Plain Grating to suit Bellmouth Gully Inlet ED065 200 1 1.6 191828 13.68 Puddle Flanges Multi-clamp Puddle Flange ED078 (Grey only) 100 1 4.6 191829 73.98 (Grey only) 150 1 6.6 191830 91.32 (Black only) 250 1 13.0 192318 117.61 (Black only) 250 1 20.0 192319 141.68 ED078 (Grey only) 200 1 6.1 191831 232.58 45 Inspection Chamber ED012 100x100 1 17.4 191832 292.69 150x100 1 18.8 191833 379.12 150x150 1 20.6 191834 481.28 NEW FOR 2019 Saint-Gobain PAM will be developing a range of rectangular chambers in standard sizes 100-150mm diameter and looking to develop larger diameter solutions 200-300mm. Check with manufacturer for information and availability Tel: 01952 262529 Sales Enquiries: +44 (0)115 930 0681 Email: sales.uk.pam@saint-gobain.co.uk www.saint-gobain-pam.co.uk 27
Trade Price List December 2018 Cast Iron drainage, rainwater pipe & gutter systems Ensign Soil and Drain ABOvE ground BELOW ground NOMINAL DELIvERY SERvICE CAT. TOOLS & ANCILLARY S T-Box Spanner EF098 EF098 1 B 191200 8.41 191200 8.41 Rachet Spanner EF100 EF100 1 B 191201 77.02 191201 77.02 13mm Deep Socket EF101 EF101 13mm 1 B 191202 19.37 191202 19.37 Allen Key Socket Adaptor EF102 EF102 1 B 191753 19.37 191753 19.37 TOUCH-UP PAINTS NEW Ensign Extrem 1K (Cut-ends treatment) Acrylic Resin Touch-up Paint for Red and Grey Systems (Quick-dry, non drip, brush applied) 1 0.5 C 226962 33.77 Two-part, touch-up Paint spray for Red System 0.4L 1 C 216317 49.90 Two-part, touch-up Paint spray for Grey System 0.4L 1 C 216318 50.39 RECOMMENDED TOOLS A Extrem 1K Touch-up paint Recommended to cut the pipe: Cordless Drill E B C D A. Lubricant for push-fit joints B. T-Box Spanner EF098 C. 13mm Deep Socket EF101 D. Allen Key Socket Adapter EF102 E. Ratchet Spanner EF100 Scorp 220 Cutter Chop saw For more information contact the technical department on 01952 262529 28 Technical Enquiries: +44 (0)1952 262529 Email: technical.soildrain.uk.pam@saint-gobain.co.uk
Prices exclude VAT Made to order Above Ground Only (see page 13) Ensign EEZI-FIT Timesaver VortX Classical Rainwater Technical Couplings Jointing Method Couplings are supplied pre-assembled. The new Ensign coupling has been designed to allow assembly without dismantling the coupling.* *Applies to 100 and 150mm coupling at time of print. 50mm and 70mm couplings will be replaced later 2014 onwards. Ensign Soil and Drain 1. Slacken bolts on coupling to fullest extent to ease assembly. 2 Push coupling over the end of the pipe or fitting ensuring the central register is abutted against the spigot edge. 3 Push the second pipe or fitting into the coupling again ensuring that the spigot is abutted against the central register. Note: Bolts should be tightened until a suitable resistance is achieved if using a torque wrench minimum setting 20Nm. The couplings do not need to be completely tightened until both halves are touching. Guidelines: 2-3mm gap. Overtightening the couplings can apply excessive stress to the coupling bolts. 4. Check alignment of assembly before tightening the bolts. Coupling bolts on all sizes are M8 and require special Allen socket adaptor (6mm) EF102, together with a ratchet spanner EF100. Alternatively use a time saving power tool. Technical Couplings PAM Ensign Grip Collars INTERNAL PRESSURE RESISTANCE Excessive internal pressure in drainage networks is always accidental. However, in specific areas changes of direction, gradient or some components like branches and plugs the junctions are exposed to end thrust forces that have to be addressed. The grip collar is an added device used in these specific areas to lock the coupling and ensure both water tightness and mechanical stability of the pipework. 1. Position the two half parts of the PAM Ensign grip collar so to encircle the coupling uniformly. The grip collars must be positioned so that the apertures fit over the fixing bolts of the coupling and the teeth are directly located onto the pipe. 2. Insert the four screws to fix the two parts together loosely. 3. Tighten the screws crosswise alternatively so that the two plates are put in parallel with the same spacing. Sales Enquiries: +44 (0)115 930 0681 Email: sales.uk.pam@saint-gobain.co.uk www.saint-gobain-pam.co.uk 29
Trade Price List December 2018 Cast Iron drainage, rainwater pipe & gutter systems Ensign EEZI-FIT cast iron drainage systems Cast iron mechanically jointed drainage systems are already one of the simplest to install by having no extras (fire collars, expansion joints, thermal limiters, fewer brackets, no acoustic insulation etc). One of the only ways to simply the install further is to offer push-fit assembly EEZI-FIT. Featuring a range of socketed fittings and couplings to BS EN877, EEZI-FIT uses standard Ensign double spigot pipe and is compatible with all Ensign 100mm and 150mm diameter fittings to cope with the most complex of installations. Applications Sanitary soil system EEZI-FIT is intended for use for gravity above ground sanitary applications in accordance with BS EN 12056 part 2 (0.5 bar performance kitemark approved). Ideal for multi-floor applications EEZI-FIT is the ideal system for projects with long vertical soil stacks, such as flats and apartments, hotels, office blocks etc; where the main stack will remain unchanged over time. Features 100mm and 150mm diameter couplings and fittings range Comprehensive range of fittings for waste connection > Boss branches, single and double swept radius > Short boss pipes with single option to three boss options > Traditional manifold 2 x 50mm waste connection with long spigot > New 100 an 150mm low level multi-waste manifolds with 6 x 2" BSP inlets with long tail spigots. Red epoxy coated fittings Benefits All the benefits of cast iron with the advantages of push-fit assembly. The system utilises a new gasket design that makes jointing simple, and completed in seconds. Electrical continuity can be accommodated. EEZI-FIT connects to standard Ensign double spigot pipe and is fully compatible with all Ensign plain-ended fittings. The installation of an Ensign mechanical joint positioned in the system can allow dismantling for future retro-fit. The EEZI-FIT range includes many options to connect to waste pipes providing even greater system flexibility: > Branches, single and double swept radius with four boss options. > Short boss pipes with single option to three boss positions. Multi-waste manifold connectors: > Traditional with 2 x 50mm waste connections but with an extended spigot which avoids the need for a joint in the floor slab. NEW Low level multi-waste manifold > Up to 6 x 2" BSP inlets 6 inlets in use Flow rate testing > Internal baffle to maximise all inlets > Long tail spigots with penetrate up to 400mm floor slab without the need of a joint connection. New Low Level Multi-Waste Manifold 30 Technical Enquiries: +44 (0)1952 262529 Email: technical.soildrain.uk.pam@saint-gobain.co.uk
Ensign EEZI-FIT Timesaver VortX Classical Rainwater Speed of Installation Ensign EEZI-FIT provides genuine opportunities for the installer to significantly reduce installation time proven in a study endorsed by the BRE (British Research Establishment). In a 9m vertical run the EEZI-FIT push-fit system in 100mm and 150mm proved virtually 50% quicker to install than HDPE using fusion welded joints. Superior Acoustic Performance EEZI-FIT has been tested to BS EN 14366 criteria and recorded acoustic levels even lower than Ensign, 4dB(A) at 2 l/s and 9dB(A) at 4 l/s. The acoustic difference between Ensign EEZI-FIT and standard HDPE is vast, the difference between acoustic HDPE and other acoustic plastic systems still significant by up to 8dB(A). EEZI-FIT JOINTING METHOD 1. Apply a small amount of jointing lubricant on the lip of the rubber gaskets at both ends to ease insertion of pipe and fittings 2. Push the coupling over the end of the pipe, ensuring the central register is abutted against the spigot edge evenly. 3. Apply a small amount of lubricant. Push the second pipe or fitting into the gasket again ensuring that the spigot is abutted against the central register. 4. After a reassuring clunk the joint is complete. EEZI-FIT when installed with acoustic brackets is the quietest system on the market the ideal solution for flats and apartments. Sales Enquiries: +44 (0)115 930 0681 Email: sales.uk.pam@saint-gobain.co.uk www.saint-gobain-pam.co.uk 31
Trade Price List December 2018 Cast Iron drainage, rainwater pipe & gutter systems Ensign EEZI-FIT Range 3m Pipe NOMINAL WEIgHT Kg DELIvERY SERvICE CAT. EP000 100 38 24.5 A 156563 97.16 150 20 41.0 A 156827 192.49 EEZI-FIT Couplings If continuity required see accessories (page 33) 88 Short Radius Bends 45 Short Radius Bends 88 Short Radius Bends with Back Door EZ001 100 12 1.3 A 208191 16.53 150 1 2.0 C 216312 33.02 EZ002 100 1 2.4 B 208192 33.00 150 1 5.0 C 216313 62.03 EZ002 100 1 1.8 B 208193 33.00 150 1 3.8 C 216319 62.03 EZ005 100 1 3.1 C 208194 59.83 150 1 5.7 C 216315 111.27 88 Large Radius Bend 100 1 4.5 C 215953 65.94 88 Large Radius Bend with Back Door 100 1 5.6 B 215952 77.42 88 Single (Swept) Branches EZ06R 100 x 100 1 5.0 B 208195 63.55 150 x 100 1 7.0 C 216342 128.05 45 Single Radius Branches 88 Single (Swept) Branches with Back Door EZ006 100 x 100 1 4.4 B 208196 56.66 150 x 100 1 6.5 C 216320 115.68 150 x 150 1 8.9 C 216341 129.85 EZ07R 100 x 100 1 6.7 C 208197 89.53 150 x 100 1 8.0 C 216314 191.44 88 Double (Swept) Branch EZ010R 100 x 100 1 6.0 C 208198 76.63 32 Technical Enquiries: +44 (0)1952 262529 Email: technical.soildrain.uk.pam@saint-gobain.co.uk
Prices exclude VAT Made to order Above Ground Only (see page 13) Ensign EEZI-FIT Timesaver VortX Classical Rainwater Boss Pipe Push-Fit with Single 50mm Waste (Supplied with grommets) Boss Pipe Push-Fit with Double 50mm Waste (Supplied with grommets) Boss Pipe Push-Fit with Double 90 50mm Waste (Supplied with grommets) NOMINAL WEIgHT Kg DELIvERY SERvICE CAT. EZ090 100 1 2.1 B 208199 52.49 EZ091 100 1 2.3 C 208200 65.45 EZ092 100 1 2.3 C 208201 65.45 Ensign EEZI-FIT Range Boss Pipe Push-Fit with Triple 90 50mm Waste (Supplied with grommets) EZ093 100 1 2.5 C 208202 65.45 50mm Waste Manifold Connector EZ094 100 1 6.6 C 208203 99.89 NEW Multi-Waste Manifold Connector EZ095 100 1 12.6 C 261139 190.00 150 1 16.8 C 261435 242.50 SPARES RANGE EEZI-FIT ACCESSORIES 100mm Gaskets (Bag of 10) 150mm Gaskets (Bag of 10) 100 10 C 208204 25.83 Continuity Clip to suit 100 & 150 diameter (Bag of 30) 150 10 C 216316 27.35 Rubber Grommets Boss Connections (Bag of 10) 30 C 223541 38.76 51mm Hole Saw for Cast Iron 10 C 208205 25.83 Hole Saw Arbour with Drill for EEZI-FIT & Timesaver C 208206 36.28 Pilot Drill for EEZI-FIT & Timesaver C 192327 45.02 Lubricant for push-fit assembly (500g Tub) C 192328 10.80 500g Tub C 199037 21.48 Sales Enquiries: +44 (0)115 930 0681 Email: sales.uk.pam@saint-gobain.co.uk www.saint-gobain-pam.co.uk 33
Trade Price List December 2018 Cast Iron drainage, rainwater pipe & gutter systems Timesaver cast iron drainage systems Timesaver Drain The Timesaver drain cast iron below ground system has been the first choice for underbuilding drainage for commercial, public and residential buildings since 1980. Product Standard BS437 Timesaver is kitemark approved Applications Underbuilding drainage encased in concrete Pipework to be laid in shallow trenches Under roads Unstable ground Ground containing methane Bridges Features 100, 150 and 225mm diameter pipes and fittings Two piece ductile iron couplings Section thickness from 8-15mm Range of traditional British Standard fittings > Bellmouth Gullies/inlets > Gully traps > Raising pieces > Anti-flooding traps Benefits Exceptional crush resistance vastly superior to other materials > Timesaver BS437 150 KN/m > Clay 40 KN/m > Plastic 6 KN/m Robust strength > To withstand over vigorous rodding/jetting > Can be installed where ground is unstable > Can be installed in shallow trenches Less bedding materials required saving cost > Can be laid in as dug trenches Fit and forget peace of mind > BS437 connectivity with existing cast iron drainage systems. > Exceptional service life Encasing pipework in the concrete slab Cast iron has the proven strength and crush resistance to withstand the weight of the concrete and remain robust during the pouring process unlike the more volatile lighter-weight plastic materials which can require filling to weigh them down. Cast iron is not affected by the high temperatures generated during the pouring and curing process which can reach temperatures in excess of 70, depending on the volume of concrete. Cost of failure can be very high if concrete slabs require digging up to repair drainage failures. 34 Technical Enquiries: +44 (0)1952 262529 Email: technical.soildrain.uk.pam@saint-gobain.co.uk
Ensign EEZI-FIT Timesaver VortX Classical Rainwater NEW GASKET TO EASE INSTALLATION SEE PAGE 54 Timesaver Soil The Timesaver soil system, was the first mechanically jointed cast iron system launched in 1973, for use on above ground soil and waste, vent and rainwater installations serving commercial, public and residential buildings for over 40 years. Product Standard BS 416 part 2 mechanically jointed systems Timesaver is Kitemark approved Applications Refurbishment Prestigious commercial buildings built in the late 1970 s to the late 90 s which are serviced by cast iron soil stacks, will most likely be Timesaver or traditional socket and spigot soil systems. If the building is to be refurbished or changes are to be made retaining some of the existing pipework then Timesaver is the best suited to connect to the original pipework. Heritage external soil stacks traditional appearance sanitary soil pipework installed on the outside of the building. Commercial, public and residential buildings > Sanitary soil, vent and waste pipes > Internal rainwater systems Features 50, 75, 100 and 150mm diameter pipes and fittings 1.8m (6ft) double spigot pipes in 75 and 100m Two piece ductile iron mechanical couplings > Electrical continuity clips available supplied separately in bags Traditional Heritage push-fit sockets > 50, 75 and 100mm (150mm see Ensign) Comprehensive fittings range > Swept branches in compliance with BS EN 12056 part 2 > Access bends and branches > Waste connection fittings Benefits Push-fit Heritage style couplings > To give traditional appearance without the labour intensive caulking of socket and spigot pipework > The most inclusive range 50-100mm Pipes available in 1.8m (6ft) in 75 and 100mm diameters to support this filed of application Complete range of pipes and fittings to support refurbishment of existing Timesaver stacks in commercial buildings All benefits of cast iron > Non-combustible fire rated A1 > Excellent acoustic properties > Minimal expansion > Strong and robust > Excellent environmental properties: > Made from up to 97% recycled content > Virtually 100% recyclable indefinitely > Long life span Timesaver Drain & Soil Coating 3m Pipes: > Internally lined with an ochre two-part epoxy coating > Externally coated in a black alkyd paint. Fittings and couplings > Internally and externally coated in a black waterbased paint Overpainting The Timesaver coating shall accept over-coating with alkyd and water based paints normally used on metallic structures Sales Enquiries: +44 (0)115 930 0681 Email: sales.uk.pam@saint-gobain.co.uk www.saint-gobain-pam.co.uk 35
Trade Price List December 2018 Cast Iron drainage, rainwater pipe & gutter systems Timesaver Drain 3m Double Spigot Pipe NOMINAL BELOW GROUND TD00 100 1 56.1 156568 182.22 150 1 95.1 156832 337.29 225 1 195.0 157042 1,009.65 Standard Coupling TD01 100 1 2.8 191294 38.90 150 1 3.9 191295 47.13 225 1 8.4 191296 108.00 Continuity Clip to suit TD01 Coupling (Bag of 25) GT96L 100/150 25 0.8 191190 58.51 Continuity Clip to suit TD01 Coupling (Bag of 25) GT968 225 25 0.1 191193 93.53 Stepped Coupling TD02 100 1 2.8 191297 40.36 150 1 3.9 191298 49.13 Continuity Clip to suit TD02 Coupling (Bag of 25) GT96T 100 25 0.9 191191 64.30 Continuity Clip to suit TD02 Coupling (Bag of 25) GT96T6 150 25 0.9 191192 70.20 Hanging Bracket or Wall Fixing cast iron TD640 100 1 2.3 191358 32.58 150 1 2.8 191359 34.43 Mild Steel Hanging Bracket or Wall Fixing M12 225 1 4.0 192374 98.20 36 Technical Enquiries: +44 (0)1952 262529 Email: technical.soildrain.uk.pam@saint-gobain.co.uk
Prices exclude VAT Made to order Ensign EEZI-FIT Timesaver VortX Classical Rainwater Medium Radius Bends 87.5 Medium Radius Bend with Heel Rest 87.5 Medium Radius Bends NOMINAL BELOW GROUND TD06 100 1 8.1 191219 72.80 150 1 16.0 191225 167.50 225 1 41.5 191229 508.18 80 Medium Radius Bend 100 1 8.7 191218 77.75 67.5 Medium Radius Bends 100 1 7.5 191217 77.75 150 1 13.8 191224 167.50 60 Medium Radius Bend 100 1 6.0 191216 72.80 45 Medium Radius Bends 100 1 5.8 191215 61.87 150 1 10.1 191223 134.04 225 1 31.8 191228 508.18 35 Medium Radius Bends 100 1 4.6 191214 61.87 150 1 9.3 191222 167.50 22.5 Medium Radius Bends 100 1 3.6 191213 61.87 150 1 7.2 191221 125.51 225 1 18.4 191227 508.18 10 Medium Radius Bends 100 1 3.0 191212 61.87 150 1 5.2 191220 125.51 225 1 13.0 191226 508.18 TD07 100 1 9.2 191230 83.50 150 1 18.0 191231 220.78 Timesaver Drain Medium Radius Bend with Rear Access Medium Radius Bend with Side Access TD08 87.5 100 1 11.4 191233 159.78 150 1 20.3 191235 355.15 225 1 57.8 191237 778.55 45 100 1 8.7 191232 156.73 150 1 15.9 191234 382.80 225 1 46.8 191236 778.55 TD09 87.5 Medium Radius Bend Side Access 100 1 12.4 191239 202.26 150 1 20.5 191241 355.15 225 1 57.5 191243 759.60 45 Medium Radius Bend Side Access 100 1 10.0 191238 191.21 150 1 26.6 191240 404.15 225 1 46.8 191242 759.60 Sales Enquiries: +44 (0)115 930 0681 Email: sales.uk.pam@saint-gobain.co.uk www.saint-gobain-pam.co.uk 37
Trade Price List December 2018 Cast Iron drainage, rainwater pipe & gutter systems Timesaver Drain 87.5 Long Radius Bend NOMINAL BELOW GROUND TD15 100 1 12.9 191244 120.30 150 1 24.1 191245 228.62 87.5 Long Radius Bend with Heel Rest TD22 100 1 15.1 191246 129.34 150 1 28.0 191247 246.93 87.5 Long Tail Bend (815mm) TD102 100 x 815 1 18.6 191289 184.51 87.5 Long Tail Bend (850mm) Large Radius TD104 100 x 850 1 33.0 197173 451.58 100 x 850 1 54.0 192699 728.09 45 Clearing Arm Bend TD425 100 1 11.9 191292 140.91 Plain Branches TD37 87.5 Plain Branches 100 x 100 1 7.6 191250 96.56 150 x 100 1 17.7 191252 208.55 150 x 150 1 21.8 191254 238.31 225 x 100 1 40.0 191256 617.24 225 x 150 1 46.3 191258 658.32 225 x 225 1 58.5 191260 731.75 67.5 Plain Branch 100 x 100 1 8.9 191249 101.66 45 Plain Branches 100 x 100 1 11.4 191248 96.56 150 x 100 1 16.6 191251 218.31 150 x 150 1 25.3 191253 238.31 225 x 100 1 42.0 191255 617.24 225 x 150 1 45.8 191257 658.32 225 x 225 1 64.4 191259 731.75 38 Technical Enquiries: +44 (0)1952 262529 Email: technical.soildrain.uk.pam@saint-gobain.co.uk
Prices exclude VAT Made to order Ensign EEZI-FIT Timesaver VortX Classical Rainwater Branches with Access Door Right Hand NOMINAL 87.5 Branch with Access Door Right Hand BELOW GROUND TD51 100 x 100 1 14.2 191262 222.77 150 x 100 1 21.4 191264 411.25 225 x 150 1 67.3 191267 960.03 Timesaver Drain Branches with Rear Access Branches with Access Door Left Hand 87.5 Double Plain Branch 225 x 225 1 79.5 191269 1,020.59 45 Branch with Access Door Right Hand 100 x 100 1 15.0 191261 222.77 150 x 100 1 21.9 191263 394.31 225 x 100 1 62.8 191265 930.46 225 x 150 1 66.8 191266 960.03 225 x 225 1 85.4 191268 1,020.59 TD52 87.5 Branch with Rear Access 100 x 100 1 13.4 191271 222.77 150 x 100 1 22.9 191273 411.25 225 x 100 1 62.8 191275 930.46 225 x 150 1 62.4 191276 960.03 225 x 225 1 79.5 191278 1,020.59 45 Branch with Rear Access 100 x 100 1 16.1 191270 233.49 150 x 100 1 22.9 191272 394.31 225 x 100 1 63.0 191274 930.46 225 x 225 1 84.40 191277 1,020.59 TD53 87.5 Branches with Access Door Left Hand 100 x 100 1 11.7 191280 233.49 150 x 100 1 21.2 191282 411.25 225 x 100 1 61.0 191284 930.46 225 x 150 1 67.3 191286 960.03 225 x 225 1 79.5 191288 1,020.59 45 Branches with Access Door Left Hand 100 x 100 1 15.0 191279 233.49 150 x 100 1 21.2 191281 394.31 225 x 100 1 62.8 191283 930.46 225 x 150 1 66.8 191285 960.03 225 x 225 1 85.4 191287 1,020.59 TD447 100 x 100 1 10.6 191293 164.19 Access Pipes TD56 100 1 9.7 191344 179.84 150 1 15.4 191345 328.39 225 1 62.6 191346 797.71 Sales Enquiries: +44 (0)115 930 0681 Email: sales.uk.pam@saint-gobain.co.uk www.saint-gobain-pam.co.uk 39
Trade Price List December 2018 Cast Iron drainage, rainwater pipe & gutter systems Timesaver Drain Taper Pipe *Connects to 200mm Ensign Socket Ferrule with C.I. Cap NOMINAL BELOW GROUND TD41 150 x 100 1 3.5 191333 94.88 225 x 100 1 13.6 191334 243.27 225 x 150 1 13.4 191335 243.27 *225 x 200 1 6.2 191336 216.79 *225 x 250 1 9.8 192431 225.78 TD36 100 1 3.4 191330 122.81 Blank End Plain (for BSP Blank End Connection use GT71 and Stepped Coupling TD02) TD34 100 1 1.3 191326 31.30 150 1 2.5 191327 59.71 225 1 10.7 191328 274.95 Transitional Pipe Socket for C.I. to BS 437 TD47 150 1 11.8 191342 131.00 225 1 31.3 191343 391.59 Transitional Pipe Adaptor from Timesaver Drain to Supersleve TD118 100 1 2.1 191350 50.24 150 1 5.0 191351 87.98 Gully Trap Plain TD60 87.5 Gully Trap Plain 100 1 12.1 191399 96.56 150 1 24.4 191400 240.29 45 Gully Trap Plain 100 1 11.5 191398 223.64 180 Gully Trap Plain 100 1 14.1 191397 131.94 87.5 Gully Trap with Surface Access TD107 100 1 23.3 191402 243.17 87.5 Gully Trap with 225mm Inlet TD64 100 1 24.0 191401 205.23 Running Trap with Double Access TD475 100 1 23.0 191404 481.33 150 1 55.4 191405 820.80 225 1 143.0 191406 2,356.55 40 Technical Enquiries: +44 (0)1952 262529 Email: technical.soildrain.uk.pam@saint-gobain.co.uk
Prices exclude VAT Made to order Ensign EEZI-FIT Timesaver VortX Classical Rainwater Gully Inlet Plain (Body Only) NOMINAL BELOW GROUND TD500 100 1 8.4 191301 100.58 Timesaver Drain Gully Inlet with Horizontal Branch (Body Only) TD105 100 x 100 1 10.5 191299 135.14 Gully Inlet with Vertical Branch (Body Only) TD106 100 x 100 1 13.7 191300 135.14 Plain Raising Piece 190mm to Bellmouth TD500/TD105/TD106 TD525 100 x 150 high 1 7.8 191303 277.06 100 x 300 high 1 13.4 191305 277.06 Plain Grate TD612 200 1 1.6 191385 12.33 Solid Cover TD613 200 1 2.1 191386 54.33 Hinged and Locking Grate TD614 200 1 1.9 191387 195.00 Sealed Plate and Frame TD615 200 1 2.8 191388 99.15 Greased Sealed Cover and Frame TD616 200 1 1.7 191389 109.10 Sales Enquiries: +44 (0)115 930 0681 Email: sales.uk.pam@saint-gobain.co.uk www.saint-gobain-pam.co.uk 41
Trade Price List December 2018 Cast Iron drainage, rainwater pipe & gutter systems Timesaver Drain Raising Piece Plain 225mm Ø Raising Piece with 100mm Ø Inlet NOMINAL BELOW GROUND TD678 75 high 1 9.5 191363 129.35 115 high 1 11.6 191365 147.35 150 high 1 13.5 191364 171.66 225 high 1 17.0 191366 182.52 300 high 1 21.5 191367 190.46 TD108 225 high 1 19.1 191347 200.64 Raising Piece with 3 x 100mm Ø 90 Inlets TD111 225 high 1 23.1 191348 464.47 Gully Inlet Tapered Plain TD684 100 1 12.9 191368 142.34 150 1 16.0 191369 160.57 Gully Inlet Tapered with 100mm Ø Inlet TD120 100 x 100 1 14.2 191352 185.25 Gully Inlet Tapered with 3 x 100mm Ø 90 Inlets TD123 100 x 100 1 20.3 191353 307.91 Light Grate TD650 265 1 3.6 191390 27.65 Heavy Grate TD651 265 1 8.0 191391 47.13 Hinged and Locking Grate TD653 265 1 5.3 191360 275.37 42 Technical Enquiries: +44 (0)1952 262529 Email: technical.soildrain.uk.pam@saint-gobain.co.uk
Prices exclude VAT Made to order Ensign EEZI-FIT Timesaver VortX Classical Rainwater Sealed Plate and Frame NOMINAL BELOW GROUND TD661 265 1 5.2 191361 91.64 Timesaver Drain Grease Sealed Cover and Frame TD662 265 1 6.5 191362 255.17 Trapless Gully with 87.5 Outlet TD467 100 1 17.7 191403 237.60 Deans Trap 600mm Deep with 87.5 Outlet TD550 100 1 55.4 191407 478.36 Galvanised Sediment Pan 1 1.9 191181 174.44 Can be used with grating options TD650 to TD653 and TD661/2 Gully Trap 435mm Deep with 87.5 Outlet TD551 100 1 30.8 191408 347.74 Galvanised Sediment Pan 1 2.0 191182 161.31 Can be used with grating options TD650 to TD653 and TD661/2 Square Top Gully Trap 255 x 250 x 415mm Deep with 87.5 Outlet TD553 100 1 26.8 191381 329.32 Galvanised Sediment Pan 1 1.0 191183 67.90 Grate to suit 1 3.2 191380 151.25 Garage Gully 300 x 545mm Deep with 87.5 Outlet TD554 100 1 80.7 191410 1,015.37 Galvanised Sediment Pan 1 3.0 191184 222.99 Grate to suit 1 23.0 191382 120.21 This product is available with 1, 2 or 3 Fresh Air Inlets P.O.A. Raising Piece for TD554 TD559 305mm Ø x 75mm high 1 12.7 191354 203.72 305mm Ø x 150mm high 1 20.4 191356 235.02 305mm Ø x 300mm high 1 37.0 191355 347.14 Sales Enquiries: +44 (0)115 930 0681 Email: sales.uk.pam@saint-gobain.co.uk www.saint-gobain-pam.co.uk 43
Trade Price List December 2018 Cast Iron drainage, rainwater pipe & gutter systems Timesaver Drain Trapless Gully Trap 300 x 615mm Deep with 87.5 Outlet NOMINAL BELOW GROUND TD556 100 1 45.4 191409 371.23 Galvanised Sediment Pan 1 1.9 191181 174.44 Garage Gully Trap 405 x 610mm Deep with 87.5 Outlet TD558 100 1 74.6 191418 1,130.92 Galvanised Sediment Pan 1 3.9 191185 189.83 Grate to suit 1 23.1 191383 171.98 Roadway Gully with Hinged Grate and Frame TD561 225 1 44.0 191357 762.69 Airtight Inspection Eye Cover TD724 100 1 11.1 191394 168.86 150 1 14.0 191395 191.33 Anti-Flooding Valve TD756 225 1 22.6 191421 762.39 Loose Puddle Flange TD777 100 1 3.7 191371 83.08 150 1 5.6 191372 89.23 225 1 8.1 191373 250.03 Inspection Chamber with one branch each side TD14 100 x 100 1 19.6 191306 340.36 150 x 100 1 24.7 191307 440.98 150 x 150 1 42.8 191308 559.59 225 x 100 1 100.0 191309 1,569.54 225 x 150 1 110.0 191310 1,698.47 225 x 225 1 174.0 191311 2,094.05 Inspection Chambers with two branches each side TD17 100 x 100 1 40.3 191312 670.02 150 x 100 1 55.9 191313 895.59 150 x 150 1 87.2 191314 1,117.39 225 x 100 1 210.0 191315 2,340.19 225 x 150 1 210.8 191316 2,381.39 225 x 225 1 240.0 191317 3,216.52 44 Technical Enquiries: +44 (0)1952 262529 Email: technical.soildrain.uk.pam@saint-gobain.co.uk
Prices exclude VAT Made to order Ensign EEZI-FIT Timesaver VortX Classical Rainwater Eureka Anti-Flood Trunk Valve (Double Spigot) NOMINAL BELOW GROUND TD750 150 1 44.0 191420 3,120.72 Timesaver Drain Intercepting Traps fitted with Plug Traditional BS 437 fittings TD477 100 1 32.7 191602 798.67 150 1 57.2 191603 1,228.28 Intercepting Trap fitted with Plug TD479 100 1 35.7 191605 1,058.33 Intercepting Traps TD481 100 1 34.1 191607 898.07 150 1 57.1 191610 1,292.06 Can be supplied with 100 mm Fresh Air Inlet LH or RH P.O.A. Eureka Anti-Flooding Trunk Valve (Socket and Spigot) TD750 100 1 42.2 191593 2,773.00 225 1 244.1 191594 7,891.86 300 1 414.3 191870 14,449.79 The PAM range of traditional drain anti-flooding traps and valves are progressively being updated. This involves the removal of the traditional socket and the spigot bead, which will simplify installation, enabling connections to be made with standard ductile iron mechanical couplings. See example of modified 225mm TD750 on the following page. Eureka Anti-Flooding Trunk Valve TD752 100 1 76.9 191595 3,686.37 150 1 126.1 191596 4,599.76 225 1 381.4 191597 9,738.33 Sales Enquiries: +44 (0)115 930 0681 Email: sales.uk.pam@saint-gobain.co.uk www.saint-gobain-pam.co.uk 45
Trade Price List December 2018 Cast Iron drainage, rainwater pipe & gutter systems Timesaver Drain Flooding Ball Valve NOMINAL BELOW GROUND TD755 100 1 51.7 191598 2,667.22 150 1 98.7 191599 3,502.39 225 1 239.6 191600 7,732.05 See reference to design/modification on page 38 Eureka Anti-Flooding Trunk Valve TD750 225mm Diameter shown. Product Code 191594. Options and pricing on page 45. 46 Technical Enquiries: +44 (0)1952 262529 Email: technical.soildrain.uk.pam@saint-gobain.co.uk
Prices exclude VAT Made to order Ensign EEZI-FIT Timesaver VortX Classical Rainwater 3m Double Spigot Pipe NOMINAL ABOVE GROUND GT00 50 1 19.5 156366 101.48 75 1 25.0 156456 113.51 100 1 28.0 156567 137.21 150 1 43.0 156831 286.49 Timesaver Soil Standard Coupling GT01 50 1 0.9 191691 17.50 75 1 1.1 191692 19.34 100 1 1.4 191693 25.25 150 1 3.1 191694 50.41 Continuity Clip to suit GT01 Standard Coupling (Bag of 25) GT96S 50/75/100 25 0.6 191189 53.16 Continuity Clip to suit GT01 Standard Coupling (Bag of 25) GT96L 150 25 0.8 191190 58.51 Conversion Coupling GT12 65 x 75 1 1.3 191695 20.49 *70 x 75 1 1.2 191429 20.49 90 x 100 1 1.5 191696 26.39 Wall Fixing Bracket (can be fitted with Acoustic Dampener to order) Short Radius Plain Bends * Connects to 70mm Ensigns GT48 50 1 0.3 191720 11.73 70 1 0.5 191721 12.85 100 1 0.6 191722 13.17 150 1 0.8 191723 24.39 87.5 Short Radius Plain Bends GT02 50 1 1.3 191620 30.85 75 1 2.6 191622 34.90 100 1 4.7 191631 42.71 150 1 4.4 191634 76.26 67.5 Short Radius Plain Bend 100 1 2.2 191625 42.71 45 Short Radius Plain Bends 50 1 0.5 191619 30.85 75 1 2.4 191621 34.90 100 1 3.3 191626 42.71 150 1 3.1 191632 76.26 11 Short Radius Plain Bend 100 1 1.3 191628 36.81 Sales Enquiries: +44 (0)115 930 0681 Email: sales.uk.pam@saint-gobain.co.uk www.saint-gobain-pam.co.uk 47
Trade Price List December 2018 Cast Iron drainage, rainwater pipe & gutter systems Timesaver Soil Short Radius Bends with Rear Access 87.5 Short Radius Bend with Side Access 87.5 Short Radius Bends with Rear Access NOMINAL ABOVE GROUND GT03 50 1 1.9 191636 76.05 75 1 3.6 191638 82.50 100 1 4.3 191642 90.33 150 1 6.1 191644 128.29 45 Short Radius Bends with Rear Access 75 1 3.9 191637 82.50 100 1 4.6 191640 90.33 150 1 8.1 191643 128.29 GT04 100 1 4.8 191646 90.33 Long and Medium Radius Bends GT02L 87.5 Long Radius Bends 75 1 4.6 191623 70.01 100 1 4.7 191630 69.15 150 1 8.5 191635 150.79 45 Long Radius Bend 100 1 6.0 191627 73.85 22.5 Long Radius Bends 100 1 1.9 191624 69.15 150 1 5.6 191633 158.06 5 Long Radius Bend 100 1 1.4 191629 42.71 87.5 Long and Medium Radius Bends with Rear Access GT03L 87.5 Long Radius Bends with Rear Access 75 1 5.9 191639 103.44 100 1 5.8 191641 116.84 150 1 10.7 191645 205.82 87.5 Long Radius Bend with Side Access GT04L 100 1 7.5 191647 116.84 87.5 Long Tail Bend 250mm Long GT43 100 1 4.3 191688 55.17 48 Technical Enquiries: +44 (0)1952 262529 Email: technical.soildrain.uk.pam@saint-gobain.co.uk
Prices exclude VAT Made to order Ensign EEZI-FIT Timesaver VortX Classical Rainwater 87.5 Long Tail Bend 815mm Long NOMINAL ABOVE GROUND GT55 100 1 15.1 191689 189.14 Timesaver Soil Single Branches 87.5 Long Tail Branch Swept 915mm Long GT06 87.5 Swept Branches (Equal and unequal) 50 x 50 1 1.0 191649 46.42 75 x 50 1 2.5 191651 52.55 75 x 75 1 3.2 191653 52.55 100 x 50 1 2.4 191655 66.05 100 x 75 1 4.1 191657 66.05 100 x 100 1 3.3 191660 66.05 150 x 100 1 7.6 191662 125.21 150 x 150 1 11.7 191664 163.66 67.5 Plain Branch 100 x 100 1 2.5 191658 66.05 45 Branches (Equal and unequal) 50 x 50 1 1.4 191648 46.42 75 x 50 1 3.5 191650 59.47 75 x 75 1 4.4 191652 64.14 100 x 50 1 2.4 191654 66.05 100 x 75 1 4.9 191656 74.60 100 x 100 1 3.7 191659 66.05 150 x 100 1 5.8 191661 183.70 150 x 150 1 8.5 191663 163.66 GT56 100 x 100 1 7.0 191690 182.91 Single Branches with Rear Access GT07 87.5 Single Branches Swept with Rear Access (Equal and unequal) 50 x 50 1 2.7 191665 101.13 75 x 50 1 3.0 191666 101.13 75 x 75 1 3.6 191668 101.13 100 x 50 1 3.2 191670 113.70 100 x 75 1 4.8 191672 113.70 100 x 100 1 4.1 191674 113.70 150 x 100 1 9.0 191676 203.43 150 x 150 1 12.0 191678 242.03 45 Single Branches with Rear Access (Equal and unequal) 100 x 100 1 6.9 191673 113.70 150 x 100 1 10.8 191675 220.46 87.5 Single Branch Swept with Side Access Right Hand GT08 100 x 100 1 5.7 191679 113.70 Sales Enquiries: +44 (0)115 930 0681 Email: sales.uk.pam@saint-gobain.co.uk www.saint-gobain-pam.co.uk 49
Trade Price List December 2018 Cast Iron drainage, rainwater pipe & gutter systems Timesaver Soil 87.5 Single Branch Swept with Side Access Left Hand NOMINAL ABOVE GROUND GT09 100 x 100 1 5.8 191680 113.70 Double Branches 87.5 Double Branch Swept with Access GT10 87.5 Double Branches Swept (Equal and unequal) 75 x 75 1 4.9 191681 78.04 100 x 100 1 4.3 191683 81.67 150 x 100 1 10.7 191684 229.96 45 Double Branch 100 x 100 1 4.5 191682 81.67 GT11 100 x 100 1 7.0 191685 129.33 Parallel Branch GT32 100 x 100 1 7.9 191686 80.56 87.5 Corner Swept Branch GT35 100 x 100 1 3.4 191687 116.10 87.5 Branch with 1 x 50mm BSP Boss Back GT06 100 1 5.4 191743 88.45 87.5 Branch with 1 x 50mm BSP Boss Right Hand GT06 100 1 4.7 191745 88.45 87.5 Branch with 1 x 50mm BSP Boss Left Hand GT06 100 1 4.7 191744 88.45 Access Pipes with Round Door GT14 75 1 4.1 191697 74.25 100 1 3.2 191698 78.04 150 1 6.3 191699 129.81 50 Technical Enquiries: +44 (0)1952 262529 Email: technical.soildrain.uk.pam@saint-gobain.co.uk
Prices exclude VAT Made to order Ensign EEZI-FIT Timesaver VortX Classical Rainwater Access Pipes with Rectangular Door NOMINAL ABOVE GROUND GT15 100 1 7.2 191700 153.75 150 1 16.4 191701 235.36 Timesaver Soil Offsets Taper Pipes Asphalt Roof Vent Connector Diameter x Projection GT24 75 x 75 1 2.4 191702 45.55 75 x 115 1 3.4 191704 50.07 75 x 150 1 3.7 191703 58.82 100 x 75 1 2.2 191705 44.94 100 x 115 1 3.6 191709 63.42 100 x 150 1 4.7 191706 63.42 100 x 225 1 5.6 191707 72.47 100 x 300 1 6.8 191708 69.15 GT28 75 x 50 1 0.6 191710 42.45 100 x 50 1 0.9 191711 53.88 100 x 75 1 0.9 191712 53.88 150 x 100 1 2.2 191713 104.87 GT73 100 1 2.1 191733 73.77 Blank Ends Plain Blank Ends with 50mm Push-fit Connector Blank Ends D/T 2" BSP GT70 50 1 0.2 191724 10.72 75 1 0.5 191725 13.39 100 1 0.8 191726 12.97 150 1 1.9 191727 18.75 GT71 75 1 0.5 191728 26.36 100 1 0.9 191729 28.29 150 1 2.0 191731 33.99 GT71T 100 1 0.9 191730 32.03 Universal Connector EPDM EF07IR 50 x 56/48/40 1 0.1 155759 15.05 (OD Dimension) Sales Enquiries: +44 (0)115 930 0681 Email: sales.uk.pam@saint-gobain.co.uk www.saint-gobain-pam.co.uk 51
Trade Price List December 2018 Cast Iron drainage, rainwater pipe & gutter systems Timesaver Soil P Trap NOMINAL ABOVE GROUND GT34 100 1 4.4 191714 68.47 P Traps with Heel Access (*No Support Lug) GT37 *50 1 2.0 191715 104.78 *75 1 6.7 191716 104.78 100 1 5.3 191717 116.13 150 1 12.0 191718 202.77 Bellmouth Gully Inlet GT483 100 1 2.4 191737 99.10 Grate to suit 1 1.6 191385 12.33 Loose Puddle Flange (Grey Epoxy Coated) ED078 100 1 4.0 191829 73.98 Boss Pipes 150mm Long with Single Boss GT106 Boss Pipes 150mm Long with Single Boss and 50mm Waste Compression Joints 50 1 1.1 192236 63.88 100 1 2.2 192237 76.26 150 1 3.8 192239 124.49 Boss Pipes 150mm Long with Single Boss and D/T 50mm BSP 75 1 1.7 191739 63.88 100 1 1.7 192238 78.66 Boss Pipes 150mm Long with 2 x 50mm Bosses Opposed and 50mm Waste Compression Joint GT109 100 2 2.5 192240 98.65 150 2 4.5 192360 140.92 Boss Pipes 150mm Long with 2 x 50mm Bosses at 90 and 50mm Waste Compression Joint GT115 100 2 2.8 192241 98.65 52 Technical Enquiries: +44 (0)1952 262529 Email: technical.soildrain.uk.pam@saint-gobain.co.uk
Prices exclude VAT Made to order Ensign EEZI-FIT Timesaver VortX Classical Rainwater Strap On Boss NOMINAL ABOVE GROUND GT133 1 1.2 192323 62.64 Hole Saw Arbour with Drill (Accessory Tools for use with GT133) 1 0.2 192327 45.02 64mm Hole Saw for Cast Iron (Accessory Tools for use with GT133) 1 0.2 192326 45.17 Pilot Drill (Accessory Tools for use with GT133) Boss Pipe 240mm Long with 2 x 50mm Bosses In Line and Push-Fit Connection 1 0.03 192328 11.34 GT132 100 2 3.1 191742 99.67 Timesaver Soil ACCESSORIES Ratchet Spanner EF100 1 0.6 191201 77.02 T Spanner (Box) EF098 1 0.1 191200 8.41 13mm Deep Socket EF101 1 0.1 191202 19.37 Sales Enquiries: +44 (0)115 930 0681 Email: sales.uk.pam@saint-gobain.co.uk www.saint-gobain-pam.co.uk 53
Trade Price List December 2018 Cast Iron drainage, rainwater pipe & gutter systems Timesaver Soil Timesaver Heritage System Timesaver is a mechanically jointed cast iron soil system to BS 416 part 2, British Standard Kitemark approved. The range includes push-fit couplings that turn a mechanical system into one with a traditional socket appearance of yesteryear, as depicted in BS 416 part 1 but without the labour intensive caulked jointing method. Supplied in a black water based primer coat the product is easy to overpaint and is the modern solution for external cast iron soil stacks, often seen on listed buildings, pre-1960's housing and properties situated in areas of conservation. The Heritage couplings are available in 50, 75, 100 and 150mm diameters that connect standard Timesaver pipe and fittings. Pipes are available in 3m lengths for 50mm and 150mm diameter (also available on 75 and 100mm) and 1.8m (6ft) lengths in 75 and 100mm diameters specifically introduced to meet this field of application. The Heritage couplings are available in three types: With fixing ears to fit to the wall Plain without ears for connection only Slip version available to use when pipework already installed. NEW Coupling Gaskets Saint-Gobain PAM have introduced new gaskets for the Heritage couplings to ease installation further. 1 Apply a small amount of lubricant (i.e. lubricant prod code 199037 on the lip of the rubber gaskets, both ends, to ease insertion of pipe/fittings. The rubber seals are factory fitted to the socket, and a suitable lubricant is recommended to ease the assembly. 2 Push joint over the end of pipe/fitting. Ensuring the central register is abutted against the spigot edge evenly. If the joint is eared, fix to wall using anticorrosion coach screws or simular. 3 Push the second pipe or fitting into the gasket again ensuring that the spigot is abutted. 54 Technical Enquiries: +44 (0)1952 262529 Email: technical.soildrain.uk.pam@saint-gobain.co.uk
Prices exclude VAT Made to order Ensign EEZI-FIT Timesaver VortX Classical Rainwater Double Spigot Pipe NOMINAL ABOVE GROUND GT00 50 x 3m 35 19.5 156366 101.48 75 x 1.8m (6ft) 1 15.0 206854 74.20 100 x 1.8m (6ft) 1 18.5 192423 87.21 150 x 3m 20 43.0 156831 286.49 Timesaver Heritage Heritage Plain Couplings Push-fit Joint GT05P 50 1 1.4 192418 27.73 75 1 1.4 206855 30.46 100 1 1.8 192421 31.87 NEW 150 1 3.6 266537 51.45 Heritage Couplings Eared Push-fit Joint GT05E 50 1 1.4 192417 28.58 75 1 2.1 206856 31.37 100 1 2.6 192420 34.61 NEW 150 1 3.6 266536 54.34 Heritage Couplings Slip Push-fit Joint GT05S 50 1 1.4 192419 35.92 75 1 1.9 206836 37.32 100 1 2.6 192422 41.96 NEW 150 1 3.6 266538 60.48 Single Gasket to suit 100mm Push-fit Joint 100 1 0.1 156133 5.17 Reducing Gasket to suit 90mm Push-fit Joint (Reduces 100 Push-fit Joint to 90mm Soil Pipe) 100 x 90 1 0.1 156132 16.55 Bracket to Suit 100mm Eared (EC001E/GT05E) Push-fit Joint EF053 100 1 0.2 192333 44.55 450mm Extended Arm Bracket EF053A 100 1 0.2 192363 44.55 Cast Iron Wall Spacer Plate Lubricant 500g Tub (To suit Eared Push-fit Joints GT05E) 50 1 0.2 192424 6.32 75 1 0.3 206838 6.32 100 1 0.4 192425 6.32 1 0.4 199037 21.48 Sales Enquiries: +44 (0)115 930 0681 Email: sales.uk.pam@saint-gobain.co.uk www.saint-gobain-pam.co.uk 55
Trade Price List December 2018 Cast Iron drainage, rainwater pipe & gutter systems VortX roof and floor drainage Roof outlets VortX is a new range of roof, floor and shower drainage products designed in compliance with BS EN1253 criteria and backed by the quality commitment of the PAM brand with nearly 100 years experience in drainage. Product Standard: BS EN1253 Applications Various flat roof structures > Concrete > Timber > Lightweight metal structure Warm, cold and inverted roofs Parapet wall construction Load bearing situations exposed to vehicular traffic i.e. car parks Features Cast iron bodies with spigots or BSP Vertical spigot roof outlets in 100mm and 150mm diameters > 88 and 45 angled roof outlets in 100mm > Flexible clamping ring Balcony outlets with Flat or notched gratings Two-way or parapet outlets Smaller diameter outlets (50/70mm): > 100mm BSP Outlets with reducing spigot adaptors VX-F501 Raising pieces and gravel guard Coatings Grey epoxy Cast iron bodies Black Polyester Domical gratings to suit vertical and angled roof outlets All clamping rings All raising pieces Sheradised coating Flat gratings to suit vertical and angled roof outlets Flat and notched gratings to suit balcony outlets. Benefits Strong and robust performance Clamping Ring on the vertical and angled roof outlets can accommodate a liquid membrane of 2-3mm to full membranes with hot bitumen of 8mm Robust domical gratings in cast iron Quality coatings with proven performance for these applications > Black polyester for performance in sunlight > Sheradised gratings to protect for load bearing applications Optimised range of bodies High flow rates tested by CRM Rainwater Drainage Consultancy > 150mm vertical roof outlet achieved 14.5 l/s Cost-effective solutions compared to Aluminium outlets VortX roof outlets utilising spigot adapters to connect small diameter pipework 56 Technical Enquiries: +44 (0)1952 262529 Email: technical.soildrain.uk.pam@saint-gobain.co.uk
Prices exclude VAT Made to order Ensign EEZI-FIT Timesaver VortX Classical Rainwater NOMINAL FLOW RATE L/S LOADING CLASS ROOF OUTLETS Vertical Roof Outlet with Flat Grate and 110mm Spigot (Suitable for car park applications) VX-R100 110mm OD Spigot 1 10.5 8.1 L15 241180 103.83 VortX Range For 150mm use 6" BSP with spigot adapter Vertical Roof Outlet with Dome Grate and 110mm Spigot VX-R105 110mm OD Spigot 1 8.9 10.7 K3 241181 103.83 For 150mm use 6" BSP with spigot adapter NEW Vertical Roof Outlets with Flat Grate (Suitable for car park applications) VX-R150 4" BSP 1 10.5 8.1 L15 241182 109.78 6" BSP 1 14.9 14.2 L15 247428 213.56 NEW Vertical Roof Outlets with Dome Grate VX-R155 4" BSP 1 8.9 10.7 K3 241183 109.78 6" BSP 1 12.4 14.5 K3 247418 213.56 For smaller diameter outlets 70mm and 50mm call Technical Department on 01952 262529 NEW Horizontal Roof Outlet 88 with Flate Grate VX-R250 4" BSP 1 6.5 8.1 L15 255262 116.30 NEW Horizontal Roof Outlet 88 with Dome Grate VX-R255 4" BSP 1 7.9 10.7 K3 255261 116.30 NEW Angled Roof Outlet 45 with Flate Grate VX-R251 4" BSP 1 8.5 8.1 L15 255250 116.30 NEW Angled Roof Outlet 45 with Dome Grate VX-R256 4" BSP 1 9.9 10.7 K3 255249 116.30 Please Note: Flow rates calculated based on 35mm head independently tested in accordance with BS EN 1253 Balcony Roof Outlet with Flat Grate and 110mm Spigot VX-R300 110mm OD Spigot 1 6.3 4.99 K3 241184 89.02 Balcony Roof Outlets with Notched Grate and 110mm Spigot VX-R305 110mm OD Spigot x 100mm 1 5.8 4.99 K3 241187 89.02 110mm Spigot x 75mm 1 6.1 4.15 K3 241186 89.02 110mm Spigot x 50mm 1 6.3 1.41 K3 241185 89.02 Sales Enquiries: +44 (0)115 930 0681 Email: sales.uk.pam@saint-gobain.co.uk www.saint-gobain-pam.co.uk 57
Trade Price List December 2018 Cast Iron drainage, rainwater pipe & gutter systems VortX Range NOMINAL FLOW RATE L/S LOADING CLASS Balcony Roof Outlet with Flat Grate VX-R350 4" BSP 1 6.2 4.99 K3 241188 100.88 Balcony Roof Outlets with Notched Grate VX-R355 4" BSP x 100mm 1 5.8 4.99 K3 241191 100.88 4" BSP x 75mm 1 6.0 4.15 K3 241190 100.88 4" BSP x 50mm 1 6.2 1.41 K3 241189 100.88 For smaller diameter outlets 70mm and 50mm use spigot adapter VX-500/VX-F501 Two Way Outlet with Angled Steel Grate VX-R500 4" BSP 1 6.2 1.09 K3 241192 84.26 For smaller diameter outlets 70mm and 50mm use spigot adapter VX-500/VX-F501 Two Way Outlet with Flat Steel Grate VX-R501 4" BSP 1 6.2 1.09 K3 247964 86.04 For smaller diameter outlets 70mm and 50mm use spigot adapter VX-500/VX-F501 Two Way Outlet with Boxed Steel Grate VX-R502 4" BSP 1 6.2 1.09 K3 248015 86.64 For smaller diameter outlets 70mm and 50mm use spigot adapter VX-500/VX-F501 Push-fit Two Way Down Spout VX-R510 110mm OD 1 2.2 253762 59.33 Raising Piece to suit 100mm and 150mm Vertical Outlets VX-R710 285 x 75mm high 1 2.5 241193 41.54 Raising Piece to suit Balcony Outlets VX-R720 50mm effective height 1 0.9 241194 41.54 BSP Spigot Adaptors VX-F500 300 x 160mm to 6" 1 4.6 247429 67.21 215 x 110mm to 4" 1 2.7 227131 18.24 215 x 80mm to 3" 1 2.1 234204 14.29 215 x 60mm to 2" 1 1.3 234205 11.55 215 x 56mm to 2" 1 1.1 234207 11.55 other lengths are available to order 58 Technical Enquiries: +44 (0)1952 262529 Email: technical.soildrain.uk.pam@saint-gobain.co.uk
Prices exclude VAT Made to order Ensign EEZI-FIT Timesaver VortX Classical Rainwater NEW BSP Adaptors BSP Reducing Bushes NOMINAL FLOW RATE L/S LOADING CLASS VX-F501 Eccentric 300 x 80mm to 4" 1 2.8 256614 26.48 Concentric 300 x 80mm to 4" 1 2.8 256615 26.48 300 x 60mm to 4" 1 2.3 256613 21.89 VX-F510 4" x 3" 1 1.1 227136 18.24 4" x 2" 1 1.9 227137 18.24 VortX Range ACCESSORIES Domical Grate Suites with Vertical Angled Outlets 1 2.4 247775 50.44 Flat Grates to suit Vertical Angled Outlets 100mm 1 4.0 247776 42.13 150mm 1 4.8 247777 42.13 Stainless Steel Gravel Guard to suit Vertical Angled Outlets VX-R730 290 x 155mm 1 0.2 247752 65.87 Clamping Rings to suit Vertical Angled Outlets 100mm 1 1.3 247778 35.01 150mm 1 3.3 247779 35.01 All roof outlets are tested to BSEN 1253 Warm Roof Applications Vertical spigot outlet with raising piece A. Gravel E. Raising Extension Piece VX-R710 B. Unsulation F. VX-R105 Spigot Body C. Membrane G. Ensign Coupling EC002 D. Concrete Deck H. Ensign Pipework 2-way outlet with spigot adaptor A. VX-R500 D. Insulation B. VX-F500 Adaptor E. Concrete Deck C. VX-R510 2-way downspout F. Cast Iron Rainwater Head E A A B C D F B D C E F G H Sales Enquiries: +44 (0)115 930 0681 Email: sales.uk.pam@saint-gobain.co.uk www.saint-gobain-pam.co.uk 59
Trade Price List December 2018 Cast Iron drainage, rainwater pipe & gutter systems VortX roof and floor drainage Floor drainage products PAM VortX offers a simplified range of floor drainage products for most applications Applications: Suitable for all commercial and industrial applications Grates available for tiled, marble, terrazzo, concrete, vinyl and resin floors. Gratings Load class options as depicted in BS EN 1253: > K3 Pedestrian areas and wet room applications such as shower areas, bathrooms, swimming baths, leisure centres, balconies, retail areas, hotels, offices, schools, public buildings, hospitals, prisons, terraces and roof gardens > L15 Areas of light vehicular traffic such as cycle ways and domestic drives > M125 Car parks Features Simplified range of trapped and untrapped cast iron gullies Lighter weight P-Trap and S-Trap gullies New cast iron modular gullies with spigot/ BSP outlets that configure to: > Deep sumps/bell traps/brewery traps Gratings and rodding eyes: > Nickel bronze & stainless steel > Cast iron > New Anti-Ligature stainless-steel gratings Full range of accessories > Funnels > Security screws > Cast iron raising pieces > Spigot adaptors for various pipe diameter connections Benefits Simplified range easy to navigate and specify S-trap offers space saving only requiring a 180mm core hole > Saving cost Cast iron gullies are robust and are grey epoxy coated Spigot adaptors to connect to most pipe sizes and materials New modular deep sump gullies that can configure to bell and brewery type traps. PAM Saint-Gobain products were used throughout the Olympic Stadium in London including the VortX grating shown above 60 Technical Enquiries: +44 (0)1952 262529 Email: technical.soildrain.uk.pam@saint-gobain.co.uk
Prices exclude VAT Made to order Ensign EEZI-FIT Timesaver VortX Classical Rainwater NOMINAL FLOW RATE L/S LOADING CLASS FLOOR DRAIN GRATINGS 150mm Circular Gratings in Nickel Bronze VX-F010 S 150mm NPSM 1 1.7 2.0 K3 227049 58.20 P 150mm NPSM 1 1.7 2.0 K3 234170 76.44 S 150mm Direct Fit 1 1.7 2.0 K3 233415 58.20 P 150mm Direct Fit 1 1.7 2.0 K3 234171 76.44 150mm Circular Gratings in Stainless Steel VX-F020 S 150mm NPSM 1 1.5 2.0 K3 227050 106.44 P 150mm NPSM 1 1.5 2.0 K3 234172 124.68 S 150mm Direct Fit 1 1.5 2.0 K3 233407 106.44 P 150mm Direct Fit 1 1.5 2.0 K3 234173 124.68 150mm Square Gratings in Nickel Bronze VX-F030 S 150mm NPSM 1 1.3 2.2 K3 227101 63.15 P 150mm NPSM 1 1.3 2.2 K3 234174 81.40 S 150mm Direct Fit 1 1.3 2.2 K3 233408 63.15 P 150mm Direct Fit 1 1.3 2.2 K3 234175 81.40 150mm Square Gratings in Stainless Steel VX-F040 S 150mm NPSM 1 1.2 2.2 K3 227102 106.44 P 150mm NPSM 1 1.2 2.2 K3 234176 124.68 S 150mm Direct Fit 1 1.2 2.2 K3 233421 106.44 P 150mm Direct Fit 1 1.2 2.2 K3 234177 124.68 200mm Square Gratings in Nickel Bronze VX-F050 S 200mm NPSM 1 3.1 3.0 K3 227103 120.47 P 200mm NPSM 1 3.1 3.0 K3 234178 138.72 S 200mm Direct Fit 1 3.1 3.0 K3 233423 120.47 P 200mm Direct Fit 1 3.1 3.0 K3 234179 138.72 200mm Square Gratings in Stainless Steel VX-F060 S 200mm NPSM 1 2.8 3.0 K3 227104 169.58 P 200mm NPSM 1 2.8 3.0 K3 234180 187.81 S 200mm Direct Fit 1 2.8 3.0 K3 233424 169.58 P 200mm Direct Fit 1 2.8 3.0 K3 234181 187.81 150mm Circular Gratings in Nickel Bronze for Vinyl Floors VX-F070 S 150mm NPSM 1 2.3 1.85 K3 227111 94.19 P 150mm NPSM 1 2.3 1.85 K3 234195 112.42 S 150mm Direct Fit 1 2.3 1.85 K3 233434 94.19 P 150mm Direct Fit 1 2.3 1.85 K3 234196 112.42 150mm Circular Gratings in Stainless Steel for Vinyl Floors VX-F080 S 150mm NPSM 1 2.1 1.85 K3 227112 151.75 P 150mm NPSM 1 2.1 1.85 K3 234197 169.98 S 150mm Direct Fit 1 2.1 1.85 K3 233435 151.75 P 150mm Direct Fit 1 2.1 1.85 K3 234198 169.98 NEW 150mm Circular Gratings in Cast Iron VX-F090 150mm NPSM 1 2.9 1.5 L15 247771 55.84 150mm Direct Fit 1 3.0 1.5 L15 247773 55.84 NEW 150mm Square Gratings in Cast Iron VX-F100 150mm NPSM 1 2.9 1.5 L15 247772 59.93 150mm Direct Fit 1 3.0 1.5 L15 247774 59.93 S = Standard Finish P = Polished Finish VortX Range Sales Enquiries: +44 (0)115 930 0681 Email: sales.uk.pam@saint-gobain.co.uk www.saint-gobain-pam.co.uk 61
Trade Price List December 2018 Cast Iron drainage, rainwater pipe & gutter systems VortX Range NOMINAL FLOW RATE L/S LOADING CLASS NEW Circular Anti-Ligature Grating in Stainless Steel VX-F021 S 150mm NPSM 1 1.5 1.1 K3 250676 133.52 NEW Square Anti-Ligature Grating in Stainless Steel VX-F041 S 150mm NPSM 1 1.6 1.1 K3 250677 133.52 NEW Circular Anti-Ligature Grating in Stainless Steel for Vinyl Floors VX-F081 S 170mm 1 2.1 1.1 K3 250678 153.68 FLOOR DRAIN RODDING EYES 150mm Circular Rodding Eyes in Nickel Bronze VX-F015 S 150mm NPSM 1 1.8 N/A K3 227105 60.42 P 150mm NPSM 1 1.8 N/A K3 234182 78.67 S 150mm Direct Fit 1 1.8 N/A K3 233426 60.42 P 150mm Direct Fit 1 1.8 N/A K3 234183 78.67 150mm Circular Rodding Eyes in Stainless Steel VX-F025 S 150mm NPSM 1 1.6 N/A K3 227106 133.20 P 150mm NPSM 1 1.6 N/A K3 234184 151.44 S 150mm Direct Fit 1 1.6 N/A K3 233427 133.20 P 150mm Direct Fit 1 1.6 N/A K3 234185 151.44 150mm Square Rodding Eyes in Nickel Bronze VX-F035 S 150mm NPSM 1 1.4 N/A K3 227107 65.38 P 150mm NPSM 1 1.4 N/A K3 234187 83.63 S 150mm Direct Fit 1 1.4 N/A K3 233428 65.38 P 150mm Direct Fit 1 1.4 N/A K3 234188 83.63 150mm Square Rodding Eyes in Stainless Steel VX-F045 S 150mm NPSM 1 1.3 N/A K3 227108 133.20 P 150mm NPSM 1 1.3 N/A K3 234189 151.44 S 150mm Direct Fit 1 1.3 N/A K3 233430 133.20 P 150mm Direct Fit 1 1.3 N/A K3 234190 151.44 200mm Square Rodding Eyes in Nickel Bronze VX-F055 S 200mm NPSM 1 3.4 N/A K3 227109 133.20 P 200mm NPSM 1 3.4 N/A K3 234191 151.44 S 200mm Direct Fit 1 3.4 N/A K3 233431 133.20 P 200mm Direct Fit 1 3.4 N/A K3 234192 151.44 200mm Square Rodding Eyes in Stainless Steel VX-F065 S 200mm NPSM 1 3.1 N/A K3 227110 169.58 P 200mm NPSM 1 3.1 N/A K3 234193 187.81 S 200mm Direct Fit 1 3.1 N/A K3 233433 169.58 P 200mm Direct Fit 1 3.1 N/A K3 234194 187.81 62 Technical Enquiries: +44 (0)1952 262529 Email: technical.soildrain.uk.pam@saint-gobain.co.uk
Prices exclude VAT Made to order Ensign EEZI-FIT Timesaver VortX Classical Rainwater NOMINAL FLOW RATE L/S LOADING CLASS 150mm Circular Rodding Eyes in Nickel Bronze for Vinyl Floors VX-F075 S 150mm NPSM 1 2.4 N/A K3 227113 108.69 P 150mm NPSM 1 2.4 N/A K3 234199 126.93 S 150mm Direct Fit 1 2.4 N/A K3 233438 108.69 P 150mm Direct Fit 1 2.4 N/A K3 234200 126.93 150mm Circular Rodding Eyes in Stainless Steel for Vinyl Floors VX-F085 S 150mm NPSM 1 2.2 N/A K3 227114 160.92 P 150mm NPSM 1 2.2 N/A K3 234201 179.16 S 150mm Direct Fit 1 2.2 N/A K3 233439 160.92 P 150mm Direct Fit 1 2.2 N/A K3 234202 179.16 ABS Airtight Bung (Can be fitted to Rodding Eyes to make a double seal) VX-F430 105mm 1 0.1 N/A 241195 4.26 VortX Range FLOOR DRAINS Untrapped Floor Gullies with Medium Sump (110mm) VX-F200 110mm 1 2.4 227119 19.77 Untrapped Floor Gullies with Medium Sump (4" BSP) VX-F200 P 4" BSP 1 2.6 227118 24.28 Untrapped Floor Gully with Sumpless Body VX-F210 110mm NPSM 1 1.6 227120 23.07 P Trap Floor Gully VX-F220 110mm 1 6.4 227129 62.65 S Trap Floor Gully VX-F230 110mm 1 6.4 227130 62.65 Clamping Ring to suit Floor Gullies VX-F205 205mm 1 0.7 233440 8.77 S = Standard Finish P = Polished Finish Sales Enquiries: +44 (0)115 930 0681 Email: sales.uk.pam@saint-gobain.co.uk www.saint-gobain-pam.co.uk 63
Trade Price List December 2018 Cast Iron drainage, rainwater pipe & gutter systems VortX Range DEEP SUMP GULLIES NOMINAL FLOW RATE L/S LOADING CLASS NEW Cast Iron Deep Sump Body with 3 x 2" BSP Inlets Epoxy-coated VX-F215 110mm OD Spigot Outlet 1 12.3 260384 106.52 4" BSP Outlet 1 11.5 260385 118.58 6" BSP Outlet 1 10.1 260386 125.91 Body can also include 4" BSP inlet upon request NEW Bell Trap Body with 3 x 2" BSP Inlets and 4" NPSM reducing collar Epoxy-coated Cast Iron VX-F250 110mm OD Spigot Outlet/NPSM 1 12.3 260387 196.08 4" BSP Outlet/NPSM 1 11.5 260388 208.10 Can be fitted with Nickel Bronze/Stainless Steel Gratings Body can also include 4" BSP inlet upon request NEW Brewery Trap 3 x 2" BSP Inlets with 300mm Square Cast Iron Grating Body Epoxy-coated Cast Iron/Grating Sheradised VX-F240 110mm OD Spigot Outlet 1 29.6 260389 426.87 Body can also include 4" BSP inlet upon request NEW Brewery Trap 3 x 2" BSP Inlets with 300mm Square Cast Iron Grating Body Epoxy-coated Cast Iron/Grating Sheradised VX-F244 4" BSP Outlet 1 28.6 260390 439.43 Body can also include 4" BSP inlet upon request NEW Galvanised Steel Filter Basket to suit Deep Sump and Bell Trap VX-F415 188 x 60mm 1 0.5 260391 108.93 NEW 300 x 300mm Square Grating in Ductile Iron Sheradised VX-F110 8" NPSM 1 14 260392 111.83 NEW 300 x 300mm Square Grating in Ductile Iron Sheradised to suit Deep Sump VX-F215 VX-F130 4" NPSM 1 14.5 260393 107.07 NEW 300 x 300mm Square Grating in Ductile Iron Sheradised to suit Bell Trap VX-F250 VX-110 200mm Direct Fit 1 14.0 260394 109.20 Please see page 61 for Floor Drainage Accessories 64 Technical Enquiries: +44 (0)1952 262529 Email: technical.soildrain.uk.pam@saint-gobain.co.uk
Prices exclude VAT Made to order Ensign EEZI-FIT Timesaver VortX Classical Rainwater NOMINAL FLOW RATE L/S LOADING CLASS NEW 300 x 300mm Square Grating in Sheradised Ductile Iron VX-F120 150mm Direct Fit 1 14.1 260395 107.39 VortX Range NEW 300 x 300mm Square Grating in Sheradised Ductile Iron VX-130 100mm Direct Fit 1 14.4 260396 104.51 NEW Reducing Ring to suit Bell Trap and Deep Sump Epoxy-coated Cast Iron VX-F206 4" NPSM 1 0.5 260397 37.54 VortX Bell Trap Arrangement VortX Brewery Trap 150mm Circular Nickel Bronze Grating VX-F010 Supplied with 300 x 300mm Square Cast Iron Grating (Sheradised) Optional Clamp Ring for Membrane VX-F205 8"(200mm) optional NPSM Reducing Collar VX-F206 2" BSP Plug Cast Iron Bell Trap supplied Supplied with Galvanised Sediment Bucket Supplied with Cast Iron Trap Bell Trap Body VX-F250 110mm Spigot 100mm ED001 Ensign Coupling Cast Iron Brewery Trap 4" BSP Outlet Bill of material Item Code Product Code Cast Iron Bell Trap 110mm Spigot VX-F250 260387 Cast Iron Reducing Ring VX-F206 260397 Cast Iron Clamping Ring VX-F205 233440 Nickel Bronze Grating 150mm Circular VX-F010 227049 (Optional) 215 x 110mm to 4" BSP Spigot Adaptor VX-F500 Sales Enquiries: +44 (0)115 930 0681 Email: sales.uk.pam@saint-gobain.co.uk www.saint-gobain-pam.co.uk 65
Trade Price List December 2018 Cast Iron drainage, rainwater pipe & gutter systems VortX roof and floor drainage Shower drains Robust cast iron shower gullies in 100mm and 50mm with a range of stainless-steel gratings to suit most types of solid or suspended floor construction. Applications Commercial, public and residential buildings Solid or suspended floors Tiled or flexible sheet floor membranes Anti-ligature gratings for incarceration areas i.e. prisons, etc. Features Vertical and horizontal shower gullies 100mm and 50mm Cast iron grey epoxy coated 50mm removable bottle trap with unique twist and lock mechanism Stainless-steel gratings Anti-ligature gratings Polished finished available to order Benefits Simplified range Robust cast iron solutions Unique twist and lock removable trap Available in kit format Cost effective with other materials Shower Drain Kits VortX shower drain kits consist of a cast iron body with vertical or horizontal outlet, a removable bottle trap and a stainless-steel grating of choice either in standard or polished finish supplied all together in a cardboard box. 66 Technical Enquiries: +44 (0)1952 262529 Email: technical.soildrain.uk.pam@saint-gobain.co.uk
Prices exclude VAT Made to order Ensign EEZI-FIT Timesaver VortX Classical Rainwater NOMINAL SHOWER DRAIN KITS Shower Drain Kit with 110mm Cast Iron Vertical Supplied complete in a box FLOW RATE L/S LOADING CLASS VortX Range Kit includes: VX-S260 110mm Vertical Shower Drain and VX-F400 Bottle Trap plus a Stainless Steel Grating to suit listed below TO ORDER THE WHOLE KIT PLEASE USE THE LISTED NEXT TO THE REQUIRED GRATING Shower Drain Kit 110mm Cast Iron Vertical with VX-S270 150mm Circular Stainless Steel Grating for Vinyl Floor S 150mm 1 3.3 1.1 K3 239376 102.10 P 150mm 1 3.3 1.1 K3 239733 120.35 Shower Drain Kit 110mm Cast Iron Vertical with VX-S270 150mm Decorative Stainless Steel Grating for Vinyl Floor S 150mm 1 3.2 1.1 K3 239736 102.10 P 150mm 1 3.2 1.1 K3 239737 120.35 Shower Drain Kit 110mm Cast Iron Vertical with VX-S271 150mm Square Stainless Steel Grating for Vinyl Floor S 150mm 1 3.5 1.1 K3 239734 104.00 P 150mm 1 3.5 1.1 K3 239735 122.23 Shower Drain Kit 110mm Cast Iron Vertical with VX-S271 150mm Decorative Square Stainless Steel Grating for Tiled Floor S 150mm 1 3.4 1.1 K3 239738 104.00 P 150mm 1 3.4 1.1 K3 239739 122.23 Shower Drain Kit with 60mm Cast Iron Vertical Shower Drain Supplied complete in a box Kit includes: VX-S260 60mm Shower Drain and VX-F400 Bottle Trap plus a Stainless Steel Grating to suit listed below TO ORDER THE WHOLE KIT PLEASE USE THE LISTED NEXT TO THE REQUIRED GRATING Shower Drain Kit 60mm Cast Iron Vertical Shower Drain with VX-S270 150mm Circular Stainless Steel Grating for Vinyl Floor S 150mm 1 3.3 1.1 K3 239740 102.10 P 150mm 1 3.3 1.1 K3 239741 120.35 Shower Drain Kit 60mm Cast Iron Vertical Shower Drain with VX-S270 150mm Decorative Stainless Steel Grating for Vinyl Floor S 150mm 1 3.3 1.1 K3 239744 102.10 P 150mm 1 3.3 1.1 K3 239745 120.35 Shower Drain Kit 60mm Cast Iron Vertical Shower Drain with VX-S270 150mm Square Stainless Steel Grating for Vinyl Floor S 150mm 1 3.5 1.1 K3 239742 104.00 P 150mm 1 3.5 1.1 K3 239743 122.23 Shower Drain Kit 60mm Cast Iron Vertical Shower Drain with VX-S270 150mm Decorative Square Stainless Steel Grating for Vinyl Floor S 150mm 1 3.4 1.1 K3 239746 104.00 P 150mm 1 3.4 1.1 K3 239747 122.23 S = Standard Finish P = Polished Finish Sales Enquiries: +44 (0)115 930 0681 Email: sales.uk.pam@saint-gobain.co.uk www.saint-gobain-pam.co.uk 67
Trade Price List December 2018 Cast Iron drainage, rainwater pipe & gutter systems VortX Range NOMINAL FLOW RATE L/S Shower Drain Kit with 60mm Cast Iron Horizontal Shower Drain Supplied complete in a box Kit includes: VX-S261 60mm Shower Drain and VX-F400 Bottle Trap plus a Stainless Steel Grating to suit listed below LOADING CLASS TO ORDER THE WHOLE KIT PLEASE USE THE LISTED NEXT TO THE REQUIRED GRATING Shower Drain Kit 60mm Cast Iron Horizontal Shower Drain with VX-S270 150mm Circular Stainless Steel Grating for Vinyl Floor S 150mm 1 3.4 0.9 K3 239748 102.10 P 150mm 1 3.4 0.9 K3 239749 120.35 Shower Drain Kit 60mm Cast Iron Horizontal Shower Drain with VX-S270 150mm Decorative Stainless Steel Grating for Vinyl Floor S 150mm 1 3.3 0.9 K3 239752 102.10 P 150mm 1 3.3 0.9 K3 239753 120.35 Shower Drain Kit 60mm Cast Iron Horizontal Shower Drain with VX-S271 150mm Square Stainless Steel Grating for Vinyl Floor S 150mm 1 3.6 0.9 K3 239750 104.00 P 150mm 1 3.6 0.9 K3 239751 122.23 Shower Drain Kit 60mm Cast Iron Horizontal Shower Drain with VX-S271 150mm Decorative Square Stainless Steel Grating for Tiled Floor S 150mm 1 3.5 0.9 K3 239754 104.00 P 150mm 1 3.5 0.9 K3 239756 122.23 SHOWER DRAINS Cast Iron Shower Drains (Body only) Vertical VX-S260 110mm OD 1 2.4 227125 30.42 60mm OD 1 2.4 227126 30.42 Cast Iron Shower Drain (Body only) Horizontal VX-S261 60mm OD 1 2.5 227127 30.42 Removable Bottle Trap ABS VX-F400 50mm Trap 1 0.1 227128 23.10 Stainless Steel Filter Basket to suit Shower Drains VX-F410 110mm 1 0.2 227138 25.55 Circular Stainless Steel Gratings to suit Shower Drains for Vinyl Floor Horiz/Vert Drain VX-S270 S 150mm 1 0.8 0.9/1.1 K3 227132 48.59 P 150mm 1 0.8 0.9/1.1 K3 234208 66.83 Circular Decorative Stainless Steel Gratings to suit Shower Drains for Vinyl Floor Horiz/Vert Drain VX-S270 S 150mm 1 0.7 0.9/1.1 K3 227133 48.59 P 150mm 1 0.7 0.9/1.1 K3 234209 66.83 68 Technical Enquiries: +44 (0)1952 262529 Email: technical.soildrain.uk.pam@saint-gobain.co.uk
Prices exclude VAT Made to order Ensign EEZI-FIT Timesaver VortX Classical Rainwater NOMINAL FLOW RATE L/S LOADING CLASS Square Steel Gratings to suit Shower Drains for Vinyl Floor Horiz/Vert Drain VX-S271 S 150mm 1 1.0 0.9/1.1 K3 227134 50.48 P 150mm 1 1.0 0.9/1.1 K3 234210 68.73 VortX Range Decorative Square Steel Gratings to suit Shower Drains for Tiled Floor Horiz/Vert Drain VX-S271 S 150mm 1 0.9 0.9/1.1 K3 227135 50.48 P 150mm 1 0.9 0.9/1.1 K3 234211 68.73 NEW Circular Anti-Ligature Stainless Steel Grating to suit Shower Drains for Vinyl Floors Horiz/Vert Drain VX-S272 S 150mm 1 0.8 0.9/1.1 K3 250679 58.16 NEW Square Anti-ligature Stainless Steel Grating to suit Shower Drains for Tiled Floors Horiz/Vert Drain VX-S273 S 150mm 1 1.0 0.9/1.1 K3 250680 59.99 ACCESSORIES FLOOR DRAIN Screws & Allen Key (Bag of 4 Security Screws and Allen Key) VX-F420 1 0.1 233455 4.86 Oval Funnel in Nickel Bronze VX-F305 1 0.7 227116 79.16 Circle Funnel in Nickel Bronze VX-F300 1 0.3 227117 46.15 Circle Funnel in Stainless Steel VX-F310 1 0.2 227115 48.53 S = Standard Finish P = Polished Finish Sales Enquiries: +44 (0)115 930 0681 Email: sales.uk.pam@saint-gobain.co.uk www.saint-gobain-pam.co.uk 69
Trade Price List December 2018 Cast Iron drainage, rainwater pipe & gutter systems Classical cast iron rainwater pipe and gutter systems Saint-Gobain PAM UK manufactures the Classical range of traditional rainwater and gutter systems designed in accordance with BS 460. Cast iron gutters and downpipes have been manufactured at the Telford site for over 100 years servicing the housing and construction markets, recognised for their aesthetic charm, strength to withstand high winds, heavy snow, and vandalism and above all their long life capabilities. No other material can match the character, durability, strength or appeal of cast iron and most importantly only cast iron can preserve the intentions of the original architect and the aesthetic integrity of the building. Applications Listed and traditional properties Ecclesiastical buildings i.e. Churches Homes of high quality and appearance Farm buildings and barn conversions Public Houses Railway buildings Self-build homes of character Properties in conservation areas Pre-1960 homes refurbishment Inner city buildings Sport/recreation buildings Benefits Strength > High resistance to impact (accidental and vandalism) a major consideration for inner cities, town shopping precincts and schools etc. > Secure against heavy snow falls and high winds > Rigidity to comfortably accommodate the weight of ladders for routine maintenance > The physical properties of cast iron will be sustained throughout its life (provided adequately painted and maintained) Acoustics > Will not rattle in high winds > Will not twist/creak due to temperature changes > Excellent sound deadening properties therefore no significant sound of running or dripping water disturbing the peace Appearance > Cast iron has aesthetic charm that simply cannot be matched by other materials > Retains and enhances the traditional character of the building > Can be painted any colour to match building > Enhances perception of the value to the property > Many profiles to match virtually all architectural styles Longevity > Naturally durable up to 100 years Far more cost effective over longer term lasting 5 times that of plastic look-a-like systems (assuming they last 20 years) > Cost effective in long term > Minimal maintenance: If installed correctly to the manufacturer's recommendations (refer to Installation Guide), cast iron systems should require little structural maintenance throughout their life only periodical painting approximately every 5 years or longer (depending on location and climatic conditions) Green material > Manufactured from up to 97% recycled content > 100% recyclable at the end of its long life indefinitely > Eliminates unnecessary replacement and waste NO LANDFILL LEGACY > Profile designs have changed little over the years. Therefore new components can easily be integrated into existing systems, avoiding costs of complete replacement 70 Technical Enquiries: +44 (0)1952 262529 Email: technical.soildrain.uk.pam@saint-gobain.co.uk
Ensign EEZI-FIT Timesaver VortX Classical Rainwater Why Choose Cast Iron? The material properties of cast iron have long been recognised and it is these which make it particularly suitable for the rainwater systems of listed buildings and wherever conservation is an issue. Revised Planning Practice Guide PPS5 for Historic Environment. The Department and Local Government, and English Heritage advises: A change from original materials usually requires building consent Point 189 supports the use of materials appropriate to the relevant period, such as cast iron for gutters and downpipes for many Georgian and Victorian buildings Classical Rainwater Contents Page 74 Half Round Gutter and Connections Page 77 Beaded Half Round Gutter and Connections Page 78 Deep Half Round Gutter and Connections Page 79 Ogee Gutter and Connections Page 81 Moulded Gutter and Connections Page 83 Notts OG Gutter and Connections Page 84 Round Pipes and Fittings Page 87 Rainwater Heads Page 88 Rectangular Pipes and Fittings Page 91 Technical Calculations and Installation Advice Sales Enquiries: +44 (0)115 930 0681 Email: sales.uk.pam@saint-gobain.co.uk www.saint-gobain-pam.co.uk 71
Trade Price List December 2018 Cast Iron drainage, rainwater pipe & gutter systems Range Classical gutter profiles available Half Round sizes: 100mm (4"), 115mm (4.5"), 125mm (5") and 150mm (6") PRIMED PLUS COATED PLEASE NOTE: All other Plus products coated to order Standard Classical finish All standard Classical products are supplied in a black water based primer coating for on-site painting to the colour of your choice. Ensure use an appropriate paint that is suitable for overpainting a water based primer. A paint often used by approved installers is Bradite. Classical Plus Deep Half Round: 100mm x 75mm (4" x 3"), 125mm x 75mm (5" x 3") Beaded Half Round: 100mm (4"), 115mm (4.5") and 125mm (5 ) Moulded: 100mm x 75mm (4"x3") 125mm x 100mm (5"x4") and 150mm x 100mm (6"x4") Ogee: 100mm (4"), 115mm (4.5") and 125mm (5") Notts Ogee: 115mm (4.5") Classical cast iron rainwater and gutter systems supplied in high performance black semi-gloss finished coat for immediate installation. Coating: High performing Polymer Powder Alloy (PPA571) in a black semi-gloss to an average thickness of 200 micron. Black as standard available on half round and ogee gutters and circular downpipe systems from stock. Other profiles to order. Other colours available to order price on application. Tested to 1500 hours salt spray and ultra-violet resistance. Product is supplied wrapped to protect from damage. After installation, it is important that any slight installation damage to the coating is repaired with touch-up paint. Any cut ends should be primer and top coated. Benefits Finished product for immediate installation No painting on site Reduces total installed time by up to 60% Factory applied coating to a consistent standard When used with gutter jointing kits installation can be completed in a day Recognised paint system for the coating of metal for external applications Cast Iron Gutter Rainwater pipe profiles Circular pipes: 65mm (2.5"), 75mm (3") and 100mm (4") Rectangular: 100mm (4") x 75mm (3") No Eared Eared PLUS Coating High performance semi-gloss black finish Polymer Average thickness 200 microns Classical Plus Colour Options The Classical Plus range can now be supplied in a range of colour options, see below, which are all PPA571. Price and availability on application. Other colours available to a specified RAL on application. These are polyester powder coated (Not PPA571) 72 Please note: Actual RAL colours when applied to the product may vary from these representations. White, or very light colours, are not available. Technical Enquiries: +44 (0)1952 262529 Email: technical.soildrain.uk.pam@saint-gobain.co.uk
Ensign EEZI-FIT Timesaver VortX Classical Rainwater Rainwater Diverter Kit The Classical range now includes a Rainwater Diverter in cast iron, enabling homeowners to utilise natural resources effectively, and save money on their water bills. The Rainwater Diverter is obtainable in kit format in sizes 65mm and 75mm diameter in standard primer or PLUS finish for installing into a new or an existing system. Complete with all connecting plugs and a tube to connect to most water butts, the diverter mechanism fits inside a standard eared loose socket (A586), and is bag packed, with a step by step instruction installation guide. Installation Simply determine the size and capacity water butt to be used Fix the socket into the downpipe with the outlet at a similar level to the inlet of the water butt and allow for a slight fall When installed the collector should be no higher than the top of the water butt so that when the water butt is full the water will flow back down the rainwater pipe Secure the socket back to the wall using 8mm x 75mm coach screws and wall plugs. Drop the triangular spacer on top of the collector to prevent the pipe above slipping down. Insert the rainwater pipe from above and Water butt not included fix back to the wall. Diverter kit Contents Connecting nozzle can be fitted left hand or right hand Sales Enquiries: +44 (0)115 930 0681 Email: sales.uk.pam@saint-gobain.co.uk www.saint-gobain-pam.co.uk 73
Trade Price List December 2018 Cast Iron drainage, rainwater pipe & gutter systems Classical Cast-Iron Rainwater Pipe & Gutter Systems HALF ROUND GUTTER AND CONNECTIONS Half Round Gutter (1,830mm length) 90 Angle Double Socket 90 Right-Hand Angle 90 Left-Hand Angle 135 Right-Hand Angle 135 Left-Hand Angle Union Clip Stopend for Spigot External Stopend for Socket Internal PRIMED PLUS G800 G800 100 1 6.2 192191 46.31 192551 61.52 115 1 7.4 192192 48.27 192552 63.24 125 1 8.3 192193 56.50 192553 73.66 150 1 10.4 192194 93.31 192554 113.39 G802D G802D 100 1 1.1 192224 23.38 192566 26.75 115 1 1.3 192225 24.79 192567 28.09 125 1 1.5 192226 32.14 192568 34.88 G801 G801 100 1 0.9 192004 19.34 192500 22.98 115 1 1.3 192006 19.87 192502 23.51 125 1 1.4 192008 23.40 192504 26.81 150 1 2.0 192010 42.80 192506 67.79 G802 G802 100 1 0.9 192012 19.34 192508 22.98 115 1 1.3 192014 19.87 192510 23.51 125 1 1.4 192016 23.40 192512 26.81 150 1 2.0 192018 42.80 192514 67.79 G801 G801 100 1 0.8 192003 19.72 192499 22.98 115 1 0.9 192005 19.87 192501 23.51 125 1 1.3 192007 29.44 192503 32.26 150 1 1.6 192009 43.64 192505 67.79 G802 G802 100 1 0.8 192011 19.72 192507 22.98 115 1 0.9 192013 19.87 192509 23.51 125 1 1.3 192015 29.94 192511 32.26 150 1 1.6 192017 43.64 192513 67.79 G803 G803 100 1 0.5 192019 12.75 192515 16.96 115 1 0.5 192020 15.88 192516 19.50 125 1 0.7 192021 17.96 192517 21.70 150 1 0.7 192022 20.15 192518 39.15 G804 G804 100 1 0.4 192023 6.51 192519 9.90 115 1 0.4 192024 8.39 192520 11.51 125 1 0.6 192025 8.39 192521 11.51 150 1 0.6 192026 11.68 192522 16.43 G805 G805 100 1 0.3 192027 6.51 192523 9.90 115 1 0.3 192028 8.39 192524 11.51 125 1 0.5 192029 8.39 192525 11.51 150 1 0.6 192030 11.68 192526 16.43 74 Technical Enquiries: +44 (0)1952 262529 Email: technical.soildrain.uk.pam@saint-gobain.co.uk
Prices exclude VAT Made to order Ensign EEZI-FIT Timesaver VortX Classical Rainwater Nozzle PRIMED PLUS G806 G806 Nozzle with 65mm Outlet 100 1 1.1 192031 18.81 192527 22.50 115 1 1.3 192033 20.52 192529 24.08 125 1 1.4 192035 23.40 192531 26.81 Nozzle with 75mm Outlet 100 1 1.3 192032 18.81 192528 22.50 115 1 1.4 192034 20.52 192530 24.08 125 1 1.4 192036 23.40 192532 26.81 150 1 1.8 192037 40.56 192533 57.14 Nozzle with 100mm Outlet 150 1 1.8 192038 40.56 192534 57.14 Dropend with Socket G807 G807 Dropend with Socket and 65mm Outlet 100 1 0.9 192039 22.08 192535 28.94 115 1 0.9 192040 24.75 192536 31.29 Dropend with Socket and 75mm Outlet 125 1 1.1 192041 27.66 192537 33.82 150 1 1.8 192042 46.42 192538 57.14 Dropend with Socket and 100mm Outlet 150 1 2.2 192043 47.32 192539 57.14 Dropend with Spigot G808 G808 Dropend with Spigot and 65mm Outlet 100 1 0.9 192044 22.08 192540 28.94 115 1 0.9 192045 24.75 192541 31.29 Dropend with Spigot and 75mm Outlet 125 1 1.0 192046 28.19 192542 33.82 150 1 1.4 192047 47.32 192543 57.14 Dropend with Spigot and 100mm Outlet 150 1 2.2 192048 47.32 192544 57.14 Cast Iron Fascia Bracket G809 G809 100 1 192049 5.44 192545 6.90 115 1 192050 5.44 192546 7.47 125 1 192051 5.44 192547 7.97 150 1 192052 6.87 192548 8.20 Mild Steel Rise and Fall Bracket. Please note this product is GALVANISED and requires painting after installation G872 100 1 0.4 256523 10.83 115 1 0.4 256524 10.83 125 1 0.4 256525 11.14 150 1 0.4 256526 11.33 Mild Steel Rise and Fall Bracket with retaining lip. Please note this product is GALVANISED and requires painting after installation G877 100 1 0.4 220703 10.83 115 1 0.4 220704 10.83 125 1 0.4 220705 11.14 Mild Steel Rise and Fall Bracket with retaining lip and understay. Please note this product is GALVANISED and requires painting after installation G877 100 1 0.4 220731 15.97 115 1 0.4 220732 16.15 125 1 0.4 220733 17.66 150 1 0.4 220734 16.97 Classical Cast-Iron Rainwater Pipe & Gutter Systems Sales Enquiries: +44 (0)115 930 0681 Email: sales.uk.pam@saint-gobain.co.uk www.saint-gobain-pam.co.uk 75
Trade Price List December 2018 Cast Iron drainage, rainwater pipe & gutter systems Classical Cast-Iron Rainwater Pipe & Gutter Systems PRIMED Top Fix Rafter Bracket in Galvanised Mild Steel G871 GALVANISED G871 100 1 0.3 192247 5.17 192391 7.21 115 1 0.3 192248 5.17 192392 7.21 125 1 0.3 192249 5.37 192393 7.40 150 1 0.3 192250 8.11 192394 9.92 Side Fix Rafter Bracket in Galvanised Mild Steel G870 GALVANISED G870 100 1 0.3 192243 5.17 192388 7.21 115 1 0.3 192244 5.17 192387 7.21 125 1 0.3 192245 5.37 192389 7.40 150 1 0.3 192246 8.11 192390 9.92 Drive-in Bracket with Retaining Lip. Please note this product is GALVANISED and requires painting after installation G878 100 1 220706 11.71 115 1 220707 11.75 125 1 220708 11.78 ACCESSORIES Cast Iron Jointing Kit to suit 100, 115 and 125mm sized standard half round gutter systems (Pack of 20) G873 G873 20 0.3 192284 40.78 192284 40.78 PLUS Plus Coating Black Touch-up Paint Primer 0.5 Litre Tin 1 192549 25.61 Plus Coating Black Touch-up Paint Top Coat 0.5 Litre Tin 1 192550 25.61 How to use the Cast Iron Jointing Kit 1. Push screw through spigot of gutter or fitting and then through the hole in the gasket material. The hole in the gasket is a tight fit and will locate on the screw while the joint is being made. 2. Locate the screw, seal and spigot of the gutter or fitting into the socket of the gutter or fitting and fix square nut to the end of the screw. 3. Ensure the seal is sitting squarely in the socket and tighten the nut on the screw. (It may be necessary to hold the screw with a screw driver as the seal is compressed. 4. Trim excess rubber at the edge of the joint with a sharp bladed knife. 5. Paint gutters, joint and screws as per installation guide. 1 2 3 4 5 76 Technical Enquiries: +44 (0)1952 262529 Email: technical.soildrain.uk.pam@saint-gobain.co.uk
Prices exclude VAT Made to order Ensign EEZI-FIT Timesaver VortX Classical Rainwater BEADED HALF ROUND GUTTER AND CONNECTIONS Half Round Gutter (1,830mm length) NEW NEW Union Clip 90 Angle Double Socket 135 Angle Double Socket Stop End for Spigot External Stop End for Socket Internal Nozzles Cast Iron Fascia Bracket PRIMED PLUS G820 G820 100 1 9.0 192197 46.31 223167 61.52 115 1 10.8 192198 48.27 213645 63.24 125 1 12.2 192199 56.50 209694 73.66 G822D G822D 100 1 1.3 238998 20.07 248068 24.17 115 1 1.7 236531 20.33 246992 24.53 125 1 1.8 238999 24.76 240067 29.89 G822D G822D 100 1 1.0 238996 20.07 248067 24.17 115 1 1.3 236532 20.33 248070 24.53 125 1 1.4 238997 24.76 248071 29.89 G823 G823 100 1 0.7 192091 12.72 223172 15.34 115 1 0.7 192092 15.52 213643 18.73 125 1 0.8 192093 17.96 209691 21.67 G824 G824 100 1 0.5 192094 6.51 223173 7.84 115 1 0.5 192095 8.39 213617 10.13 125 1 0.5 192096 8.42 209680 10.16 G825 G825 100 1 0.3 192097 6.51 223174 7.84 115 1 0.4 192098 8.39 213616 10.13 125 1 0.5 192099 8.42 209678 10.13 G826 G826 Nozzle with 65mm Outlet 100 1 1.8 192100 20.04 223175 24.17 115 1 1.3 192101 20.52 213615 24.74 125 1 1.4 192103 24.27 223179 29.30 Nozzle with 75mm Outlet 115 1 1.4 192102 20.91 223176 25.21 125 1 1.5 192104 24.27 209677 29.30 G809 G809 100 1 0.3 192049 5.44 192545 6.90 115 1 0.3 192050 5.44 192546 7.47 125 1 0.3 192051 5.44 192547 7.97 Classical Cast-Iron Rainwater Pipe & Gutter Systems TECHNICAL ADvISORy SERvICE Complete CAD drawing take-off detailing bill of materials Installation advice Site Report T: 01952 262529 E: technical.soildrain.uk.pam@saint-gobain.co.uk Your leading supplier of iron technology www.saint-gobain-pam.co.uk Sales Enquiries: +44 (0)115 930 0681 Email: sales.uk.pam@saint-gobain.co.uk www.saint-gobain-pam.co.uk 77
Trade Price List December 2018 Cast Iron drainage, rainwater pipe & gutter systems Classical Cast-Iron Rainwater Pipe & Gutter Systems DEEP HALF ROUND GUTTER AND CONNECTIONS Gutter (1,830mm length) 90 Right Hand Angle 135 Right Hand Angle 90 Left Hand Angle 135 Left Hand Angle NEW 90 Double Socket Angle PRIMED PLUS G810 G810 100 x 75mm 1 13.6 192195 77.52 218539 94.94 125 x 75mm 1 14.0 192196 100.18 210572 122.68 G811 G811 100 x 75mm 1 3.2 192054 53.15 219622 60.78 G811 G811 100 x 75mm 1 3.2 192053 53.15 223180 60.78 G812 G812 100 x 75mm 1 3.2 192058 53.15 219623 60.78 G812 G812 100 x 75mm 1 3.2 192057 53.15 223181 60.78 G812D G812D 125 x 75mm 1 3.4 256634 67.48 258066 77.13 NEW 135 Double Socket Angle G812D G812D 125 x 75mm 1 3.4 256635 67.48 257921 77.13 Union Clip Stop End for Spigot External Stop End for Socket Internal Nozzles Cast Iron Fascia Bracket G813 G813 100 x 75mm 1 0.5 192061 21.30 219624 27.06 125 x 75mm 1 0.5 192062 22.56 223186 28.67 G814 G814 100 x 75mm 1 0.8 192063 18.67 218552 21.33 125 x 75mm 1 0.7 192064 23.00 210558 26.29 G815 G815 100 x 75mm 1 0.6 192065 18.67 218553 21.33 125 x 75mm 1 0.6 192066 23.00 210557 26.29 G816 G816 Nozzle with 65mm Outlet 100 x 75mm 1 1.8 192067 53.15 223182 60.78 125 x 75mm 1 2.5 192069 68.82 223187 78.66 Nozzle with 75mm Outlet 100 x 75mm 1 1.8 192068 53.15 218554 60.78 125 x 75mm 1 2.5 192070 67.48 210559 77.13 G819 G819 100 x 75mm 1 0.3 192077 18.32 218555 20.94 125 x 75mm 1 0.7 192078 22.56 210571 25.79 78 Technical Enquiries: +44 (0)1952 262529 Email: technical.soildrain.uk.pam@saint-gobain.co.uk
Prices exclude VAT Made to order Ensign EEZI-FIT Timesaver VortX Classical Rainwater Mild Steel Rise and Fall Bracket. Please note this product is PRIMED GALVANISED and requires painting after installation PLUS 100 x 75mm 1 227013 15.67 125 x 75mm 1 225821 16.74 Top Fix Rafter Bracket in Galvanised Mild Steel. Please note this product is GALVANISED and requires painting after installation 100 x 75mm 1 225560 17.56 125 x 75mm 1 206955 18.26 Side Fix Rafter Bracket in Galvanised Mild Steel. Please note this product is GALVANISED and requires painting after installation 100 x 75mm 1 214902 18.26 125 x 75mm 1 225051 19.68 Classical Cast-Iron Rainwater Pipe & Gutter Systems OGEE GUTTER AND CONNECTIONS Ogee Gutter (1,830mm length) G840 G840 100 1 9.0 192204 51.64 199748 70.26 115 1 10.5 192206 56.81 199803 73.03 125 1 12.5 192208 59.61 199824 76.08 90 Internal Angle G841 G841 100 1 1.0 192137 20.15 199793 23.67 115 1 1.5 192139 21.84 199805 25.10 125 1 1.9 192141 23.82 199828 26.81 135 Internal Angle G841 G841 100 1 1.0 192136 20.93 199792 23.95 115 1 1.0 192138 22.70 199804 25.82 125 1 1.8 192140 29.93 199827 32.66 90 External Angle G842 G842 100 1 1.0 192143 20.15 199795 23.67 115 1 1.4 192145 21.84 199780 25.10 125 1 1.5 192147 23.82 199830 26.81 Sales Enquiries: +44 (0)115 930 0681 Email: sales.uk.pam@saint-gobain.co.uk www.saint-gobain-pam.co.uk 79
Trade Price List December 2018 Cast Iron drainage, rainwater pipe & gutter systems Classical Cast-Iron Rainwater Pipe & Gutter Systems OGEE GUTTER AND CONNECTIONS continued 135 External Angle PRIMED PLUS G842 G842 100 1 1.0 192142 20.93 199794 23.95 115 1 1.1 192144 22.70 199806 25.82 125 1 1.4 192146 29.93 199829 32.66 Union Clip G843 G843 100 1 0.7 192148 12.75 199796 16.96 115 1 0.7 192149 15.52 199813 19.19 125 1 0.7 192150 17.96 199851 21.70 Stop End for Socket Internal G844 G844 100 1 0.3 192151 6.64 199798 9.99 115 1 0.5 192152 8.60 199814 11.60 125 1 0.5 192153 8.60 199852 13.05 Stop End for Spigot External G845 G845 100 1 0.5 192154 6.64 199800 9.99 115 1 0.5 192155 8.60 199815 11.60 125 1 0.6 192156 8.60 199871 13.05 Nozzles G846 G846 Nozzle with 65mm Outlet 100 1 1.3 192157 20.53 199801 23.90 115 1 1.5 192158 21.84 199834 25.17 125 1 1.9 192159 23.82 199873 27.13 Nozzle with 75mm Outlet 125 1 1.9 192160 23.82 199874 27.13 Fascia Bracket G849 G849 100 1 0.3 192169 5.89 199802 7.28 115 1 0.3 192170 5.89 199837 7.84 125 1 0.5 192171 6.66 199876 9.01 Rise and Fall Bracket. Please note this product is GALVANISED and requires painting after installation G874 100 1 0.5 208278 11.39 115 1 0.5 208280 11.39 125 1 0.5 208281 11.49 Top Fix Rafter Bracket in Galvanised Mild Steel. Please note this product is GALVANISED and requires painting after installation G875 100 1 0.4 208282 8.42 115 1 0.4 208283 8.42 125 1 0.4 208284 8.90 Side Fix Rafter Bracket in Galvanised Mild Steel. Please note this product is GALVANISED and requires painting after installation G876 100 1 0.4 208285 8.42 115 1 0.4 208286 8.42 125 1 0.4 208287 8.90 80 Technical Enquiries: +44 (0)1952 262529 Email: technical.soildrain.uk.pam@saint-gobain.co.uk
Prices exclude VAT Made to order Ensign EEZI-FIT Timesaver VortX Classical Rainwater MOULDED GUTTER AND CONNECTIONS Moulded Gutter (1,830mm length) 90 Internal Angle 90 External Angle 135 Internal Angle 135 External Angle Union Clip Stop End for Spigot Left Hand Stop End for Socket Right Hand Nozzles PRIMED PLUS G830 G830 100 x 75mm 1 11.0 192200 88.74 204868 108.66 125 x 100mm 1 18.0 192202 130.10 206382 159.32 150 x 100mm 1 19.0 192621 192.99 223199 236.34 G831 G831 100 x 75mm 1 2.0 192113 49.02 223188 59.17 125 x 100mm 1 2.3 192115 70.42 206383 84.99 150 x 100mm 1 3.4 192668 95.97 223200 115.82 G832 G832 100 x 75mm 1 2.0 192117 49.97 204869 59.17 125 x 100mm 1 2.3 192119 70.42 206385 84.99 150 x 100mm 1 3.4 208227 95.97 223202 115.82 G831 G831 100 x 75mm 1 2.0 192112 49.02 223189 59.17 125 x 100mm 1 3.2 192114 70.42 223194 84.99 150 x 100mm 1 2.6 208230 95.97 223201 115.82 G832 G832 100 x 75mm 1 1.2 192116 49.97 223190 60.28 125 x 100mm 1 1.5 192118 70.42 223195 84.99 150 x 100mm 1 2.6 208272 95.97 223203 115.82 G833 G833 100 x 75mm 1 0.5 192120 20.91 223191 25.21 125 x 100mm 1 0.6 192121 24.23 206386 29.23 150 x 100mm 1 0.7 208276 32.01 223204 38.63 G834 G834 100 x 75mm 1 0.5 192122 18.72 204874 22.59 125 x 100mm 1 0.7 192123 24.23 206388 29.23 150 x 100mm 1 0.8 192665 32.01 223205 38.63 G835 G835 100 x 75mm 1 0.7 192124 18.72 204875 22.59 125 x 100mm 1 0.9 192125 24.23 206387 29.23 150 x 100mm 1 1.0 192666 32.01 223206 38.63 G836 G836 Nozzle with 65mm Outlet 100 x 75mm 1 2.0 192126 49.97 223192 60.28 125 x 100mm 1 2.0 192128 70.42 223196 84.99 150 x 100mm 1 3.9 221821 95.39 223207 115.11 Nozzle with 75mm Outlet 100 x 75mm 1 2.0 192127 49.97 204876 60.28 125 x 100mm 1 2.0 192129 70.42 206390 84.99 150 x 100mm 1 3.9 192667 95.39 223208 115.11 Nozzle with 100mm Outlet 125 x 100mm 1 2.0 192130 71.79 223197 86.61 150 x 100mm 1 4.0 208273 95.39 223209 115.11 Classical Cast-Iron Rainwater Pipe & Gutter Systems Sales Enquiries: +44 (0)115 930 0681 Email: sales.uk.pam@saint-gobain.co.uk www.saint-gobain-pam.co.uk 81
Trade Price List December 2018 Cast Iron drainage, rainwater pipe & gutter systems Classical Cast-Iron Rainwater Pipe & Gutter Systems MOULDED GUTTER AND CONNECTIONS continued Nozzles continued PRIMED PLUS G836 G836 Nozzle with 100 x 75mm Outlet 125 x 100mm 1 2.3 192131 71.79 206389 86.61 150 x 100mm 1 4.0 206930 95.39 223210 115.11 Fascia Bracket G839 G839 100 x 75mm 1 0.5 192267 9.91 223193 11.96 125 x 100mm 1 0.6 192242 9.91 223198 11.96 150 x 100mm 1 0.6 192623 10.72 223212 11.82 Rise and Fall Bracket in Galvanised Mild Steel. Please note this product is GALVANISED and requires painting after installation 100 x 75mm 1 0.4 240305 27.30 125 x 100mm 1 0.5 230033 33.96 150 x 100mm 1 0.6 248203 33.96 Rise and Fall Bracket with Understay in Galvanised Mild Steel. Please note this product is GALVANISED and requires painting after installation 100 x 75mm 1 0.5 MTO 38.46 125 x 100mm 1 0.6 MTO 40.99 150 x 100mm 1 0.7 226093 40.99 Top Fix Rafter Bracket in Galvanised Mild Steel. Please note this product is GALVANISED and requires painting after installation 100 x 75mm 1 0.2 230392 24.75 125 x 100mm 1 0.3 233283 26.87 150 x 100mm 1 0.3 222138 29.70 Side Fix Rafter Bracket in Galvanised Mild Steel. Please note this product is GALVANISED and requires painting after installation 100 x 75mm 1 0.2 MTO 26.18 125 x 100mm 1 0.3 223380 28.70 150 x 100mm 1 0.3 226081 31.26 82 Technical Enquiries: +44 (0)1952 262529 Email: technical.soildrain.uk.pam@saint-gobain.co.uk
Prices exclude VAT Made to order Ensign EEZI-FIT Timesaver VortX Classical Rainwater NOTTS OG GUTTER AND CONNECTIONS Notts OG Gutter (1,830mm length) 90 Internal Angle 135 Internal Angle 90 External Angle 135 External Angle Union Clip PRIMED PLUS G850 G850 115mm 1 14.5 192210 91.72 219546 112.33 G851 G851 115mm 1 2.0 192173 52.90 219532 60.45 G851 G851 115mm 1 2.0 192172 52.90 223213 60.45 G852 G852 115mm 1 2.0 192175 52.90 219533 60.45 G852 G852 115mm 1 2.0 192174 52.90 223214 60.45 G853 G853 115mm 1 0.8 192176 21.74 219538 24.84 Classical Cast-Iron Rainwater Pipe & Gutter Systems Stop End for Spigot External G854 G854 115mm 1 0.6 192177 17.90 219536 20.45 Stop End for Socket Internal G855 G855 115mm 1 0.6 192178 17.90 219537 20.45 Nozzles Fascia Bracket to suit Notts OG G856 G856 Nozzle with 65mm Outlet 115mm 1 2.4 192179 62.21 223215 71.14 Nozzle with 75mm Outlet 115mm 1 2.4 192180 52.02 219535 59.47 G859 G859 115mm 1 0.5 192183 17.90 219539 20.45 Rise and Fall Bracket in Galvanised Mild Steel to suit Notts OG. Please note this product is GALVANISED and requires painting after installation 115mm 1 0.4 220963 30.05 Top Fix Rafter Bracket in Galvanised Mild Steel to suit Notts OG. Please note this product is GALVANISED and requires painting after installation 115mm 1 0.2 221397 17.31 Side Fix Rafter Bracket in Galvanised Mild Steel to suit Notts OG. Please note this product is GALVANISED and requires painting after installation 115mm 1 0.2 220964 17.31 Sales Enquiries: +44 (0)115 930 0681 Email: sales.uk.pam@saint-gobain.co.uk www.saint-gobain-pam.co.uk 83
Trade Price List December 2018 Cast Iron drainage, rainwater pipe & gutter systems Classical Cast-Iron Rainwater Pipe & Gutter Systems PRIMED ROUND PIPES AND FITTINGS Single Socket Pipes Eared (1,830mm length) A585 A585 65mm 1 10.3 191912 90.18 192448 106.46 75mm 1 12.5 191916 90.18 192450 106.46 100mm 1 16.0 191919 121.11 192452 149.98 Corner Pipes Eared (1,830mm length) Corner pipes available on request Corner Pipes No Ears (1,830mm length) A585 A585 65mm 1 10.1 191910 84.39 192447 101.14 75mm 1 12.1 191914 84.39 192449 101.14 100mm 1 15.5 191918 115.22 192451 144.02 Plain Barrels (1,750mm length) A585 A585 65mm 1 9.0 192216 72.24 192558 83.21 75mm 1 11.0 192217 72.24 192559 83.21 100mm 1 14.0 192218 96.32 192560 114.12 Loose Sockets Eared A586 A586 65mm 1 1.3 191921 17.64 192453 24.27 75mm 1 1.5 191922 17.64 192454 24.27 100mm 1 2.0 191923 23.82 192455 30.56 Loose Sockets No Ears A586 A586 65mm 1 0.9 192219 13.16 192561 19.58 75mm 1 1.1 192220 13.16 192562 19.58 100mm 1 1.3 192221 18.94 192563 25.55 Corner Loose Sockets PLUS Corner sockets available on request Cast Iron Wall Spacer Plate for use with Eared Classical Rainwater Pipes and Shoes A584 A584 65mm 1 0.2 192213 7.67 192555 9.11 75mm 1 0.3 192214 7.81 192556 9.28 100mm 1 0.4 192215 7.93 192557 9.36 30mm Wood Bobbins one size fits all (Pack of 10) 65mm 10 0.1 242200 16.40 75mm 10 0.1 242200 16.40 100mm 10 0.1 242200 16.40 Pipenails (Pack of 10) Length 75mm 10 242231 4.86 Length 100mm 10 242232 5.47 84 Technical Enquiries: +44 (0)1952 262529 Email: technical.soildrain.uk.pam@saint-gobain.co.uk
Prices exclude VAT Made to order Ensign EEZI-FIT Timesaver VortX Classical Rainwater PRIMED PLUS Shoes Front A588 A588 Shoes Front Eared 65mm 1 2.3 191924 43.96 192456 50.80 75mm 1 2.8 191925 43.96 192457 50.80 100mm 1 4.5 191926 58.38 192458 64.56 Shoes Front No Ears 65mm 1 2.2 192227 38.14 192569 44.88 75mm 1 2.3 192228 38.14 192570 44.88 100mm 1 3.8 191927 51.37 192459 58.49 Anti-Splash Shoes A589 A589 Anti-Splash Shoes Eared 65mm 1 4.5 259738 54.99 259748 60.50 75mm 1 4.2 259744 54.99 259752 60.50 Anti-Splash Shoes No Ears 65mm 1 4.0 259742 52.78 259750 58.30 75mm 1 3.7 259746 52.78 259753 58.30 Access Pipe A590 A590 Eared 65mm 1 2.9 192410 99.02 192412 107.35 75mm 1 3.8 192411 102.72 192413 112.31 100mm 1 5.5 192223 144.52 192564 162.97 No Ears 65mm 1 2.4 191928 68.50 192460 76.07 75mm 1 3.4 191929 71.91 192461 79.64 100mm 1 4.9 192222 128.12 192565 137.42 Diverter Kits include Tank Connector and Collector Pipe, packed in a bag, with fixing instructions A593 A593 Diverter Kits Left Hand Connection Waterbutt 65mm 1 1.6 192395 52.10 192397 59.63 75mm 1 1.8 192396 52.10 192398 59.63 Diverter Kits Right Hand Connection Waterbutt 65mm 1 1.6 214840 52.10 217407 59.63 Water Butt not included 75mm 1 1.8 217408 52.10 217409 59.63 92 Bends A591 A591 65mm 1 1.9 191930 26.92 192462 33.34 75mm 1 2.6 191933 32.67 192465 39.28 100mm 1 4.3 191936 46.14 192468 53.12 112 Bends A591 A591 65mm 1 1.9 191931 27.44 192463 33.34 75mm 1 2.3 191934 32.67 192466 39.28 100mm 1 3.8 191937 46.14 192469 53.12 135 Bends A591 A591 65mm 1 1.6 191932 26.92 192464 33.34 75mm 1 1.9 191935 30.83 192467 37.40 100mm 1 2.9 191938 67.74 192470 75.31 92 Branches A592 A592 65mm 1 3.0 191939 56.50 192471 63.03 75mm 1 4.0 191942 62.30 192474 68.86 100mm 1 5.9 191945 72.59 192477 80.63 Classical Cast-Iron Rainwater Pipe & Gutter Systems Sales Enquiries: +44 (0)115 930 0681 Email: sales.uk.pam@saint-gobain.co.uk www.saint-gobain-pam.co.uk 85
Trade Price List December 2018 Cast Iron drainage, rainwater pipe & gutter systems Classical Cast-Iron Rainwater Pipe & Gutter Systems ROUND PIPES AND FITTINGS continued 112 Branches 135 Branches Offsets Offsets Wall Bracket in Galvanised Steel PRIMED PLUS A592 A592 65mm 1 3.0 191940 56.50 192472 63.03 75mm 1 3.5 191943 62.30 192475 68.86 A592 A592 65mm 1 3.3 191941 56.50 192473 63.03 75mm 1 3.6 191944 62.30 192476 68.86 A594 A594 75mm Projection Offset 65mm 1 2.3 191946 41.20 192478 48.00 75mm 1 2.7 191953 41.20 192485 48.00 100mm 1 4.7 191960 77.71 192492 85.52 115mm Projection Offset 65mm 1 2.6 191947 41.20 192479 48.00 75mm 1 2.7 191954 41.20 192486 48.00 100mm 1 4.1 191961 79.19 192493 85.52 150mm Projection Offset 65mm 1 3.2 191948 41.20 192480 48.00 75mm 1 3.5 191955 41.20 192487 48.00 100mm 1 5.9 191962 77.71 192494 85.52 225mm Projection Offset 65mm 1 3.4 191949 47.94 192481 54.99 75mm 1 3.8 191956 47.94 192488 54.99 100mm 1 6.2 191963 94.12 192495 102.38 A594 A594 305mm Projection Offset 65mm 1 3.8 191950 56.20 192482 63.40 75mm 1 5.0 191957 58.95 192489 66.21 100mm 1 6.4 191964 95.96 192496 102.38 380mm Projection Offset 65mm 1 4.5 191951 112.08 192483 120.82 75mm 1 6.4 191958 112.08 192490 124.41 100mm 1 6.8 191965 153.02 192497 162.76 455mm Projection Offset 65mm 1 5.9 191952 131.24 192484 140.45 75mm 1 6.8 191959 131.24 192491 140.45 100mm 1 7.7 191966 189.56 192498 196.69 Pipes and fittings outside the standard range will be considered for manufacture on a quotational basis GALVANISED PLUS COAT A548 A548 65mm 1 0.2 192301 15.44 192400 18.33 75mm 1 0.2 192302 15.50 192401 18.44 100mm 1 0.4 192303 15.68 192402 18.61 86 Technical Enquiries: +44 (0)1952 262529 Email: technical.soildrain.uk.pam@saint-gobain.co.uk
Prices exclude VAT Made to order Ensign EEZI-FIT Timesaver VortX Classical Rainwater Pipe Clip with Spike Drive-In Spike RAINWATER HEADS Flat Hopper Heads Flat Hoppers 305 x 186 x 200mm Flat Hopper Corners PRIMED PLUS 65mm 1 0.2 223286 25.00 75mm 1 0.3 223134 26.15 100mm 1 0.4 223133 26.15 Pipes and fittings outside the standard range will be considered for manufacture on a quotational basis A549 65mm 1 0.2 256541 5.78 75mm 1 0.3 256542 5.78 100mm 1 MTO POA Pipes and fittings outside the standard range will be considered for manufacture on a quotational basis A750 A750 Flat Hopper Heads 210 x 160 x 185mm 65mm 1 3.9 191904 97.20 192441 104.79 75mm 1 4.0 191905 97.20 192442 104.79 Flat Hopper Heads 250 x 215 x 215mm 100mm 1 6.2 191906 115.19 192443 120.84 A751 A751 65mm 1 6.0 222660 97.11 222661 105.71 75mm 1 6.0 222662 97.11 222663 105.71 A751 A751 65mm 1 6.0 230093 113.99 MTO POA Classical Cast-Iron Rainwater Pipe & Gutter Systems Box Heads 225 x 125 x 125mm Box Head 280 x 150 x 130mm 75mm 1 6.0 234336 113.99 MTO POA A841 A841 65mm 1 3.6 191907 135.12 192444 148.70 75mm 1 3.6 191908 135.12 192445 148.70 A842 A842 100mm 1 5.4 191909 186.57 192446 200.62 Rectangular Head 300 x 250 x 200mm A484 A484 65mm 1 12.4 191897 175.49 192435 197.96 75mm 1 12.4 191898 175.49 192436 197.96 100mm 1 12.4 191899 175.49 192437 205.60 Castellated Rectangular Head 250 x 180 x 175mm A485 A485 65mm 1 6.8 191901 125.98 192438 182.76 Rectangular Head 250 x 180 x 175mm A485 A485 75mm 1 6.8 191902 125.98 192439 142.46 100mm 1 6.8 191903 125.98 192440 142.46 Sales Enquiries: +44 (0)115 930 0681 Email: sales.uk.pam@saint-gobain.co.uk www.saint-gobain-pam.co.uk 87
Trade Price List December 2018 Cast Iron drainage, rainwater pipe & gutter systems Classical Cast-Iron Rainwater Pipe & Gutter Systems PRIMED RECTANGULAR PIPES & FITTINGS Classical Pipes (1,830mm length) A601 Classical Pipes Eared 100 x 75mm 1 30 191968 260.09 Can be supplied in the Plus finished coat on a made to order basis Front Shoe Side Shoe PLUS Classical Pipes No ears 100 x 75mm 1 30 191967 255.83 Can be supplied in the Plus finished coat on a made to order basis A603 Front Shoe Eared 100 x 75mm 1 4.8 191970 175.90 Can be supplied in the Plus finished coat on a made to order basis Front Shoe No Ears 100 x 75mm 1 4.5 191969 143.28 Can be supplied in the Plus finished coat on a made to order basis A613 Right Hand Side Shoe Eared 100 x 75mm 1 5.4 191999 218.32 Can be supplied in the Plus finished coat on a made to order basis Left Hand Side Shoe Eared 100 x 75mm 1 5.9 192000 218.32 Can be supplied in the Plus finished coat on a made to order basis No Ears Loose Socket 100 x 75mm 1 5.9 191998 174.60 Can be supplied in the Plus finished coat on a made to order basis Loose Socket Eared A604 100 x 75mm 1 3.2 191972 89.92 Can be supplied in the Plus finished coat on a made to order basis Loose Socket No Ears Built in Holderbat 100 x 75mm 1 2.5 191971 85.31 Can be supplied in the Plus finished coat on a made to order basis A605 100 x 75mm 1 2.0 191973 72.78 Can be supplied in the Plus finished coat on a made to order basis Earbands Ornamental Earbands (as Trefoil) A606 100 x 75mm 1 1.4 191974 58.01 Can be supplied in the Plus finished coat on a made to order basis Plain Earbands 100 x 75mm 1 1.6 191975 56.12 Can be supplied in the Plus finished coat on a made to order basis 88 Technical Enquiries: +44 (0)1952 262529 Email: technical.soildrain.uk.pam@saint-gobain.co.uk
Prices exclude VAT Made to order Ensign EEZI-FIT Timesaver VortX Classical Rainwater 112.5 Side Bends 92.5 Side Bends 135 Side Bends 112 Front Bends 92 Front Bends PRIMED PLUS A607 Right Hand 112.5 Side Bends Eared 100 x 75mm 1 6.8 191978 167.41 Can be supplied in the Plus finished coat on a made to order basis Left Hand 112.5 Side Bends Eared 100 x 75mm 1 6.8 191977 167.41 Can be supplied in the Plus finished coat on a made to order basis 112.5 Side Bends No Ears 100 x 75mm 1 6.6 191976 132.44 Can be supplied in the Plus finished coat on a made to order basis A608 Right Hand 92.5 Side Bends Eared 100 x 75mm 1 8.2 191980 167.41 Can be supplied in the Plus finished coat on a made to order basis Left Hand 92.5 Side Bends Eared 100 x 75mm 1 8.2 197170 167.41 Can be supplied in the Plus finished coat on a made to order basis 92.5 Side Bends No Ears 100 x 75mm 1 7.8 191979 132.44 Can be supplied in the Plus finished coat on a made to order basis A609 Right Hand 135 Side Bends Eared 100 x 75mm 1 6.0 191983 167.41 Can be supplied in the Plus finished coat on a made to order basis Left Hand 135 Side Bends Eared 100 x 75mm 1 6.0 191982 167.41 Can be supplied in the Plus finished coat on a made to order basis 135 Side Bends No Ears 100 x 75mm 1 5.8 191981 132.44 Can be supplied in the Plus finished coat on a made to order basis A610 112 Front Bends Eared 100 x 75mm 1 7.7 191985 140.90 Can be supplied in the Plus finished coat on a made to order basis 112 Front Bends No Ears 100 x 75mm 1 7.5 191984 125.75 Can be supplied in the Plus finished coat on a made to order basis A610 92 Front Bends Eared 100 x 75mm 1 7.5 191989 140.90 Can be supplied in the Plus finished coat on a made to order basis Classical Cast-Iron Rainwater Pipe & Gutter Systems 135 Front Bends 100 x 75mm 1 7.3 191988 125.39 Can be supplied in the Plus finished coat on a made to order basis A610 135 Front Bends Eared 100 x 75mm 1 7.1 191987 143.60 Can be supplied in the Plus finished coat on a made to order basis 100 x 75mm 1 6.9 191986 125.95 Can be supplied in the Plus finished coat on a made to order basis Sales Enquiries: +44 (0)115 930 0681 Email: sales.uk.pam@saint-gobain.co.uk www.saint-gobain-pam.co.uk 89
Trade Price List December 2018 Cast Iron drainage, rainwater pipe & gutter systems Classical Cast-Iron Rainwater Pipe & Gutter Systems RECTANGULAR PIPES & FITTINGS continued Side Offset 112.5 Offsets PRIMED PLUS A611 150mm Side Offset Projection Eared 100 x 75mm 1 9.0 191992 224.02 Can be supplied in the Plus finished coat on a made to order basis 75mm Side Offset Projection No Ears 100 x 75mm 1 7.3 191990 174.47 Can be supplied in the Plus finished coat on a made to order basis 115mm Side Offset Projection No Ears 100 x 75mm 1 7.6 191991 181.46 Can be supplied in the Plus finished coat on a made to order basis 225mm Side Offset Projection No Ears 100 x 75mm 1 9.0 191993 226.10 Can be supplied in the Plus finished coat on a made to order basis 305mm Side Offset Projection No Ears 100 x 75mm 1 11.0 191994 260.54 Can be supplied in the Plus finished coat on a made to order basis A612 75mm 112.5 Offset Projection No Ears 100 x 75mm 1 7.8 191208 132.74 Can be supplied in the Plus finished coat on a made to order basis 150mm 112.5 Offset Projection No Ears 100 x 75mm 1 8.4 191209 146.69 Can be supplied in the Plus finished coat on a made to order basis 225mm 112.5 Offset Projection No Ears 100 x 75mm 1 8.2 191210 181.61 Can be supplied in the Plus finished coat on a made to order basis 305mm 112.5 Offset Projection No Ears 100 x 75mm 1 11.0 191211 216.07 Can be supplied in the Plus finished coat on a made to order basis 112.5 Offsets Continued A612 75mm 112.5 Offset Projection Eared 100 x 75mm 1 8.0 191995 169.81 Can be supplied in the Plus finished coat on a made to order basis 150mm 112.5 Offset Projection Eared 100 x 75mm 1 8.6 191996 183.11 Can be supplied in the Plus finished coat on a made to order basis 225mm 112.5 Offset Projection Eared 100 x 75mm 1 8.4 197171 235.79 Can be supplied in the Plus finished coat on a made to order basis 305mm 112.5 Offset Projection Eared 100 x 75mm 1 11.4 191997 252.02 Can be supplied in the Plus finished coat on a made to order basis Plinth Offsets A615 115mm Plinth Offset Projection Eared 100 x 75mm 1 8.6 192002 176.45 Can be supplied in the Plus finished coat on a made to order basis 115mm Plinth Offset Projection No Ears 100 x 75mm 1 8.2 192001 137.00 Can be supplied in the Plus finished coat on a made to order basis Rectangular Head 300 x 250 x 200mm A484 100 x 75mm 1 12.4 191900 175.49 Can be supplied in the Plus finished coat on a made to order basis Other rectangular/square outlets available on request 90 Technical Enquiries: +44 (0)1952 262529 Email: technical.soildrain.uk.pam@saint-gobain.co.uk
Prices exclude VAT Made to order Ensign EEZI-FIT Timesaver VortX Classical Rainwater Technical Calculations To select the size of the Classical rainwater system the following method should be used. Rainfall Intensity For roof drainage calculations it is usual to assume a rate of rainfall of 75mm/h. Regional differences are more significant in relation to total rainfall than to peak intensities and can be ignored. Short storms of higher intensity do occur and should be taken into consideration where overflowing cannot be tolerated. Step 1 Calculating the area The first stage of the calculation is determining the largest catchment area. The two most simple ways are illustrated in images (i) and (ii) taking into consideration the outlet position. Image (i), A x B = catchment area. Image (ii), C x D x pitch factor = catchment area. Step 2 determine run off rate Catchment area (m 2 ) x rainfall intensity in l/s (mm/h 3,600) = Answer A (l/s) Table 1 Roof Pitch Factor Roof Angle Factor Roof Angle Factor 15 1.13 35 1.26 17.5 1.16 37.5 1.39 20 1.18 40 1.43 22.5 1.21 42.5 1.46 25 1.24 45 1.50 27.5 1.26 47.5 1.55 30 1.29 Step 5 Answer A Reduction Factor = Total Flowrate in l/s. Step 6 Using the total flowrate, consult Table 3 for the appropriate gutter profile and size. Table 3 Gutter Capacities Capacity 1/sec Half Round Beaded Half Round Gutter Type and Size Deep Half Round Ogee Moulded No. 46 Notts Ogee 3.10 150x100 1.75 125x75 1.50 1.42 125x100 1.40 150 1.39 1.24 100x75 1.07 115 0.97 125 0.94 125 0.79 115 115 0.71 125 0.67 100x75 0.59 100 115 0.53 100 0.41 100 *All gutter and pipe capacities have been tested by HR. Wallingford Classical Cast-Iron Rainwater Pipe & Gutter Systems Step 3 Longest gutter run to an outlet (length in mm) gutter depth (mm) = Answer B Step 4 Using Answer B, consult Table 2 for the next highest reduction factor. Table 2 Reduction Factors Answer B Reduction Factor 50 1.00 100 0.93 150 0.86 200 0.80 If you require your calculations checked, please contact our Technical Department 01952 262529 Table 4 Pipe Capacities Pipe Diameter (mm) Capacity Litres/Second 65 2.00 75 3.00 100 7.00 75 x 75 3.30 100 x 75 4.00 100 x 100 5.90 100 x 125 7.40 Sales Enquiries: +44 (0)115 930 0681 Email: sales.uk.pam@saint-gobain.co.uk www.saint-gobain-pam.co.uk 91
Trade Price List December 2018 Cast Iron drainage, rainwater pipe & gutter systems Classical Cast-Iron Rainwater Pipe & Gutter Systems Installation Advice General When working on gutters or fascias at height it is advisable to use scaffolding in preference to ladders. If you are using a ladder please take the following points into consideration: (These points are for guidance only) 1. Ensure the ladder is based on level ground, preferably not soil or grass. If the ladder is based on soil or grass then place a board beneath the legs to spread the load and prevent sinking. 2. If possible, tie the top of the ladder to ring bolts at eaves level. Before fitting pipes/ gutters, ensure that all pieces have been primed and painted, including all cut ends to prevent corrosion. If any pipes/gutters have been cut/drilled, ensure that there are no loose filings on the system as these will quickly discolour the product. 3. We strongly recommend that you do not work alone. Removal and installation of cast iron guttering generally requires two people. Before replacing an existing system it is advisable to inspect and repair fascia and wall faces before beginning a new installation. All fascias must be in good condition before new guttering is installed as the weight of the cast iron gutters could cause rotten fascias to fall causing damage or injury to property or persons below. If the building does not have fascia boards, contact your local builders merchant for advice on suitable support brackets, or contact our Technical Advisory department on 01952 262529 Painting/finishing methods Classical cast iron rainwater systems are supplied in a black water-based primer coating or can be supplied in the Plus finish (a semi-gloss, black topcoat). Painting (on site, prior to installation) It is the responsibility of the purchaser/installer to ensure that a quality paint system is applied to the product before installation and any damage sustained during the installation is made good before completion. Saint-Gobain PAM is not a paint specialist and therefore is not responsible for the performance of the paint chosen by the customer. Note: Consideration must be given to the location of the property prior to selecting the appropriate paint system. Those situated in coastal regions will require a paint system that can perform in an aggressive atmosphere for example marine grade. Guidance When preparing the pipe, gutter and fittings for on-site finishes: 1. Inspect the product 2. Wire brush, and degrease with thinners to become dust free 3. Touch-up the factory applied primer coating (particularly any bare metal sections) with a metal primer. 4. Apply an undercoat (usually 2 coats) 5. Apply a quality top coat to suit the building décor Always consult the paint manufacturers recommendations. Some exterior paints may not be suitable for painting over a water based substrate. Classical Plus This range is supplied in finished coat for immediate installation. When Installation is complete it is important to inspect and any slight damage to the coating is repaired with the touch-up paint available product code 192549 (primer) and 192550 (topcoat). If situated in a coastal region please check with manufacturer for advice. 92 Technical Enquiries: +44 (0)1952 262529 Email: technical.soildrain.uk.pam@saint-gobain.co.uk
Ensign EEZI-FIT Timesaver VortX Classical Rainwater Gutter Installation FIG 1 FIG 2 FIG 3 FIG 4 FIG 5 Step 1 Identify route which rainwater will take. Step 2 Locate gully/connection to drain and position outlet, taking into account offset projection. (Fig. 1) Step 3 Approximately 75mm-100mm from the end of the run fit a bracket, taking into account the fall down to the outlet. Note: For other brackets see General Notes (on previous page). Fix the remaining gutter brackets at maximum centres of 900mm (more frequently in areas prone to high snowfall) along the fall line (as shown in Fig. 2). Additional brackets should be fitted at a maximum of 150mm from angles and outlets (as shown in Fig. 3). Brackets should be fixed using corrosion resistant wood screws 5mm x 25mm round or pan headed. Use plumbline or string for alignment when bracketing. Please Note: When using OG and moulded profiles, we recommend that fascia brackets are used wherever possible. Step 4 Ensure brackets are installed so that centre of gutter is beneath the tile edge. (Fig. 4) See installation advice, general re: Fascia Board (on previous page). Step 5 Position gutters loosely within brackets and assess installation for fall and offset position to rainwater pipe. Make adjustments as required. (Fig. 5) Classical Cast-Iron Rainwater Pipe & Gutter Systems Jointing Half Round Profile FIG 6 FIG 7 If installing Half Round Profile Gutters, The New Cast Iron Jointing Kit (Product Code 192284) can be used as an alternative to the traditional method. Kit contains enough materials to seal 20 Half Round Gutter Joints (and is suitable for the 100, 115 and 125mm HR sizes. For 150mm HR, see Fig. 10 on next page). 1. Push screw through spigot of gutter or fitting and then through the hole in the gasket material. The hole in the gasket is a tight fit and will locate on the screw while the joint is being made. (Fig. 6) 2. Locate the screw, seal and spigot of the gutter or fitting into the socket of the gutter or fitting and fix square nut and washer to the end of the screw. (Fig. 7) FIG 8 FIG 9 3. Ensure the seal is sitting squarely in the socket and tighten the nut on the screw. (It may be necessary to hold the screw with a screw driver as the seal is compressed. (Fig. 8) 4. Trim excess rubber at the edge of the joint with a sharp bladed knife. (Fig. 9) 5. Paint gutters, joint and screws to the equivalent standard of the finish coat. Sales Enquiries: +44 (0)115 930 0681 Email: sales.uk.pam@saint-gobain.co.uk www.saint-gobain-pam.co.uk 93
Trade Price List December 2018 Cast Iron drainage, rainwater pipe & gutter systems Classical Cast-Iron Rainwater Pipe & Gutter Systems Installation Advice continued Beaded Half Round, Deep Half Round, Moulded No.46, OG and Notts OG Gutter sockets should be joined to spigots with a specialist rubberised bitumen gutter sealant or a low modulus silicon sealant, then fixed with a corrosion resistant round/pan head setscrew and nut, M6 x 20mm long. (Fig. 10) Spread sufficient sealant within the socket, applying additional sealant under the head of the setscrew, when bringing the parts together. The nut should then be finger tightened. Any excess that appears should then be removed. Allow the sealant to cure and then tighten the nut and bolt. Do not over-tighten as this could damage the gutter. (Fig. 11) Repeat this procedure for all joints. See notes regarding replacement gutters. Note: Before installing gutters and fittings, ensure that all pieces have been suitably painted. See painting/finish methods. If any gutters have been cut, ensure that there are no loose filings on the system as these will quickly discolour the product, and suitably paint to match the finish coat. Cutting Gutters can be cut using a hacksaw, the blade should be tungsten tipped with 50 teeth per inch (Fig. 12). A powered saw or disc cutter can be used. Note: Please observe the necessary safety precautions recommended by the tool manufacturer. Drilling Gutters Hole size is 8mm ( 5 16") and should be positioned centrally 20mm from the spigot of the gutter (Fig. 13). The hole in a fitting socket will provide a useful template. We recommend the use of tungsten tipped drills or a good quality masonry drill. FIG 10 FIG 11 FIG 12 FIG 13 Pipe Installation (Bottom Up) Step 1 Using plumbline from centre of nozzle/offset, determine position of shoe or connection to drain. (Fig. 14) Step 2 (Eared Pipe) Determine the position of the fixings and drill suitable holes to take rawlplugs or anchors. 8mm x 50mm min. non corrosive fixing should be used without wall spacer plate, 8mm x 75mm min. non corrosive fixing with wall spacer plate. (Fig. 15) Note: Cast Iron Spacer plates may be required if wall is uneven and will also allow for easier maintenance. These should be fixed with the flat back plate to the back of the pipe ear. Step 3 The pipe spigot is offered into the shoe socket and positioned in line with the plumbline, hole centres are then marked through centre of elongated holes in ears, this will allow for adjustment. (Fig. 16) Step 4 Drill and fix as shoe. 21 / 2 21 / 2 FIG 14 FIG 15 FIG 16 FIG 17 FIG 18 Step 5 Repeat until last full length is fixed, ensuring in each case that the pipe spigot is fully seated in supporting socket. Step 6 The last pipe length should be measured from the internal base of the socket to the underside of the gutter nozzle (A), or to the spigot of the offset (B), remembering to include the depth of socket in overall length. (Fig. 17) Step 7 Cut pipe to length allowing 5mm for clearance on length and fix as previously described. Note: It may be necessary to lift gutter to locate nozzle in the pipe socket. Step 8 Finally, to centralise and secure pipe joints, use wedges made up from sheet lead cut into 30mm strips, rolled and tapped, between socket and pipe. This should be inserted in 3 places to avoid any rattle. (Fig. 18) 94 Technical Enquiries: +44 (0)1952 262529 Email: technical.soildrain.uk.pam@saint-gobain.co.uk
Ensign EEZI-FIT Timesaver VortX Classical Rainwater FIG 19 FIG 20 FIG 21 FIG 22 Uneared Pipe Fixing These can be fixed using a drive in spike (tradename, Holdfast), wrought iron or galvanised mild steel. (Fig. 19) A wall fixing bracket made in galvanised mild steel can also be used by drilling suitable holes and inserting rawlplugs to take 50mm (depth) screw. The bracket will then be located to the back plate supplied. (Fig. 20). Note: For rectangular pipes, a cast iron decorative ear band can be supplied by Saint-Gobain PAM UK for fixing pipes to the wall. Top Down Fixing Fixed Socket This is the reverse procedure to the previous section. The first pipe to be fixed is positioned and marked relative to the offset/gutter nozzle. (Fig. 21) The process is repeated up to the last full pipe length. The pipe at the base of the stack will have to be cut to length relative to the shoe. Loose Socketed Pipe Top Down (Fig.22) Step 1 The loose socket is located and fixed so that it fully supports the offset, or is located beneath the nozzle. Step 2 A pipe barrel is then inserted into the inlet of the loose socket. Step 3 Both pipe and socket are then offered to the fixed socket spigot ensuring that the pipe end is located to the underside of the fixed socket. Maintenance Cast iron rainwater gutter systems are designed and manufactured to give many years of reliable service, but to achieve this, regular inspection and minimal routine maintenance should be carried out including: 1. Annually check and clear the gutter systems & rainwater heads of any leaves and debris that could cause a potential blockage (may require more checks if in close proximity of trees etc). 2. Also inspect the condition of the paintwork at the same time as 1. wiping clean any film built up, to protect the surface finish. 3. Also check on security of fixings and joints. If the manufacturers installation and paint suppliers instructions are adhered to re-painting should not be required for approx 5 years or longer. (Unless subject to aggressive atmospheric conditions i.e. coastal towns and providing the integrity of the finish coat is maintained). Classical Cast-Iron Rainwater Pipe & Gutter Systems Step 4 Holes on the loose socket are marked, drilled and socket is then fixed. Step 5 This is repeated until stack is completed. Additional Information Making Up Offsets When the projection of the fascia is in excess of 455mm the offset is formed with a pipe offcut, and two 112 bends (as shown in Fig. 23 & 24) FIG 23 FIG 24 Sales Enquiries: +44 (0)115 930 0681 Email: sales.uk.pam@saint-gobain.co.uk www.saint-gobain-pam.co.uk 95
New Specifiers Manual Please visit our website: www.saint-gobain-pam.co.uk to download electronic versions or to request hard copies of any of our brochures. Technical Enquiries Tel: +44 (0)1952 262529 Fax: +44 (0)1952 262592 Email: technical.soildrain.uk.pam@ saint-gobain.com Sales Enquiries Tel: +44 (0)115 930 0681 Fax: +44 (0)115 930 0648 Email: sales.uk.pam@saint-gobain.com Southern Region Manager: Nick Moore 07860 467954 A new 200 page A4 technical manual that encompasses the main above and below ground drainage solutions, Ensign, EEZI-FIT, Timesaver and VortX. The technical manual details of all the product range dimensions, supported by technical information and installation guidance. NEW Head Office Lows Lane Stanton-by-Dale Ilkeston Derbyshire DE7 4QU Tel: +44 (0)115 930 5000 Fax: +44 (0)115 932 9513 Quality Assurance Quality Management Systems BS EN ISO 9001:2015 (Registered firm: 12908) Environmental Standard Environmental Management Systems BS EN ISO 14001:2004 visit: www.saint-gobain-pam.co.uk The information given in this literature is, to the best of our knowledge, correct at the time of going to print. However, Saint- Gobain PAM UK is constantly looking at ways of improving their products and services and therefore reserve the right to change, without prior notice, any of the data contained in this publication. Any orders placed will be subject to our Standard Conditions of Sale, available on request. 2017 Saint-Gobain PAM UK. Access Covers and Gratings UK-manufacturered high performing and innovative ductile iron access covers and grating solutions. Local Distributor Water and Sewer Ductile iron pipes & fittings for portable water and sewerage applications.