Cat. No Description Articles. Specifications & Ordering information

irrers, Magnetic Cat. No Description Articles DAIHAN-brand Digital Multi-point Magnetic irrers MS-MP, 4-/8-Points, Max. 500 ml per Point with Digital Feedback Control System, Digital LCD Display, Synchronous Operation, 80~1,200 rpm, with Certi. & Traceability 4-/8- 멀티포인트디지털자력교반기, 디지털피드백컨트롤시스템 80~1,200rpm 210mm Back Light LCD 300mm (1) 4-Point irrer, Digital Multi-Point Magnetic irrer MS-MP4 80~1,200rpm Digital Feedback 210mm Patented Jog-Shuttle Control System Patented Jog-Shuttle Control System 4 ir Bar 500mm 8 ir Bar (2) 8-Point irrer, Digital Multi-Point Magnetic irrer MS-MP8 Made in Korea CE Certified with Certificate & Traceability : Controlled by Serial Number, Certificate, Delivery-information, and Traceable Data Base System Ideally Suitable for Use in Incubators and Climatic Chambers Excellent for Multi-use and wide range of Sample Testing Patented Jog-Shuttle Control System PL(Product Liability) Insurance * Ideally Suitable for Use in Incubators and Climatic Chambers * Excellent for Multi-use and wide range for Sample Testing * Ideal for Heat-sensitive Procedures such as Microbiology and Biochemistry Applications * Synchronous Operation of 4 / 8 irring Points * Increased Effectiveness by Microprocessor Control * Digital LCD with Back-Light Function * Up to 0.5 Lit. irring Capacity per Point * Smooth art and Change of irring Speed * Digital Timer Function (99 hr 59 min) * orage Function for the Set Values : RPM and Timer * Extraordinary Mechanical, Physical and Chemical Resistance * Locking Mode supported for Experimental Safety (Input to Jog-Shuttle can be Disabled) * Free Voltage (AC 80V ~ 240V, 50 / 60Hz) by SMPS Spec. Model (1) MS-MP4 (2) MS-MP8 Number of irring Points 4 (2 2) irring Points 8 (4 2) irring Points Plate Size (mm) 210 300 210 500 irring Capacity (H 2 O) Distance between irring Points Speed Range Motor Rating Speed Control Resolution Timer & Alarm Display irring Bar * Other Specifications are available upon Customer s Request. Max. 0.5 Lit. per Point 100 mm 80 ~ 1,200 rpm 16/9 W 5 rpm 99hr 59min (with Continuous run.), Error status & Timer-end Digital LCD with Back-Light Function Digital Feedback with Jog Shuttle Switch(Turn+Push) 4ea 3cm bar-included, Usable : up to 3cm bar Permissible Ambient Temperature Room Temp. +5 ~ 50 Permissible Relative Moisture 85% Material Plate Body ainless-steel (#304) Power Coated eel 8ea 3cm bar-included, Usable : up to 3cm bar Dimension (w d h) (mm) 210 300 65 210 500 65 Weight 2.5 kg 3.5 kg CE Certified, PL(Product Liability) Insurance orage Function (RPM, Timer) Others Locking Mode (Jog-Shuttle Input Disabled) Alarm (Error atus and Timer-end) Packing Size (w d h) (mm) 300 330 180 330 540 180 & Gross Weight 6 kg Power Consumption 20 W Free Voltage (1 Phase, AC 80 ~ 240 V, 50 / 60 Hz) 230V DH.WMS03036 DH.WMS03038 120V DH.WMS02036 DH.WMS02038 Price, Each. 360,000 441,000

irrers, Magnetic with 500 Solid Ceramic Glass Plate/Heating (Hotplate irrer) Articles Cat. No Description DAIHAN-brand New 500 Hi-Temp. Hotplate irrers MaXtir TM MSH500, Solid Ceramic Glass Plate, 200 200mm with Large LCD, Optimum Insulation Layer. Accurate Temp. Control, Touch-button, Hot-Top Indicator, Max. 500, Accu. ±0.3 고온용디지털가열자력교반기, 최적의방열구조, 디지털피드백온도제어, 내열성 / 내화학성 / 내산성솔리드세라믹글라스플레이트 NEW NEW Holder+Clamp (CL220) Temp. Probe (SS500) 2-Insulation Layer 200mm Main Touch Button 200mm Back Light LCD (b) MaXtir TM MSH500 Unit only New Generation of MaXtir TM MSH500 model (1) Plug for Temp. Probe SS500 External/Direct Contact Temp. Probe (2) Plug for Temp. Probe SS510 External/Direct Contact Temp. Probe, Teflon Coated (3) and Rod, RD200, Φ12 L450mm (4) Holder / Clamp / Clip for Temp. Probe irring-hotplate ~500 / 1,500rpm Rod (RD200) ir Bar (a) MaXtir TM MSH500 Package-set Touch Button Hot Indication Lamp Solid Ceramic Glass Plate Hot Indication Lamp Jog-controller ; Heating and irring ir Bar Jog-controller ; Heating and irring Digital LCD with Back-Light Made in Korea PL(Product Liability) Insurance Ergonomic Design with Certificate & Traceability : Controlled by Serial Number, Certificate, Delivery-information, and Traceable Data Base System High-quality Solid Ceramic Glass Plate : Heat-/Chemical-/Acid-Resistance and Easy to Clean Optimum Insulation Fourfold Layers : BTU + Ceramic Paper + 2 SUS Insulation Layers Brushless Shade Motor & Powerful Magnet ensures Powerful irring and Precise Speed Control, Minimization Noise Maximum Temperature of 500 Microprocessor PID control Patented Jog-Dial and Main Touch Button - Best Durability, Best Mobility, Best Convenient to Operate with Back-Light Function 2 Internal K-type Temp. Sensor Operating Independently : 1 Temp. Control Sensor for Temperature Accuracy and 1 Over Temp. Detection Sensor for User Safety Hot Top Indicator LED Lamp : Hot Surface(Over 50 ) Warning Lamp for User Safety * Excellent for Sample Drying and most General Lab Heating Applications * User s Self -Compensation Function : to Control Difference between Real Temp. and Indicated Temp. (±20.0 ) * Accurate Temp. Control of the Sample in the Vessel using PT100 Sensor (Optional) * orage Function for the set Values : Temp. and Timer * Minimization of Noise and Improved the Product Life * Use of the Special Advanced Insulation for the safety of the Body Temp. * Locking Mode Supported for Experimental Safety (Input to Jog-Dial can be Disabled) Spec. Model (a) MaXtir TM MSH500 (b) MaXtir TM MSH500 (Package-set) (Unit Only) Material Body Powder Coated Aluminum Plate Solid Ceramic Glass Plate, 200 200mm irring Capa. Max. 20 Lit. Speed & Control Resolution 80 ~ 1,500 rpm, 5 rpm Temp. Range & Accuracy Max. 500, ±0.3 at Set Temperature Temp. Resolution 0.1 -Display, 0.5 -Control Temp. Uniformity Specially Designed Heating Module : Temp. Difference 10% less Heating Power / Consumption 850W Timer & Alarm 99hr 59min (with Continuous run.), Error status & Timer-end Display Digital LCD with Back-Light Function Digital Feedback with Jog Dial (Turn+Push) and Touch button. irring Bar 3cm bar-included, Usable : up to 5cm bar Safety Circuit Over Temp. Protection, Hot Top Indicator LED Lamp included andard Acc. Unit, *External Temp Probe-set, with 1ea ir Bar Unit with 1ea ir Bar Permissible Temp. & RH % Ambient +5 ~ 50, 85% RH Dimension & Weight 220 332 h114mm, 3.8kg, with Cord/Plug 230V DH.WMH00500 DH.WMH01500 120V DH.WMH00501 DH.WMH01501 Price, Each. 480,000 420,000 * Other Specifications are available upon Customer s Request. Component of Package-set * Package-set : 1 Hotplate Unit 2 SS500 PT100 External / Direct Contact Temp. Probe, * Package-set : 3 RD200 ainless steel Support Rod Φ12 L450mm * Package-set : 4 CL220 Holder+Clamp for External Temp. Probe Optional External Temp Probes/and Rods/Holder, Clamp. Clip DH.WHP503060 (1) Direct Contact Temp. Probe, SS500, PT100, 54,000 Probe Φ4 L250mm, Cable L190mm, DH.WHP503061 (2) Direct Contact Teflon Coated Temp. Probe, 65,000 SS510, Probe Φ4 L250mm, Cable L190mm, DH.WHP503036 (3) and Rod, RD200, ainless steel, Φ12 L450mm, 20,000 Screw, for MaXtir TM HP500, MaXtir TM MSH500 DH.WHP503012 (4) Holder/Clamp/Clip, CL220, for Temp. Probe 25,000

irrers, Magnetic with 380 Heating (Hotplate irrer) Cat. No Description Articles DAIHAN-brand 380 Digital Hotplate irrer MSH-D, Ceramic-Coated Plate, ±0.3, with Certi. & Traceability with Digital Feedback Control, Accurate Temp. Control, 180 180mm- or 260 260mm- Plate, 80 ~ 1,500 rpm 디지털가열자력교반기, 디지털피드백온도제어, 우수한온도균일성, 세라믹코팅플레이트 irring-hotplate ~380 / 1,500rpm ir Bar (a) 180 180mm Plate-type Digital Precise Hotplate MSH-20D Package-set ~380 Holder+Clamp (CL220) Ceramic Coated Plate Temp. Probe (SS220) Rod (RD200) Back Light LCD 260mm 180mm 180mm Patented Jog-Shuttle Control System 260mm ir Bar (b) 180 180mm Plate-type Digital Precise Hotplate MSH-30D Unit only (1) Plug for Temp. Probe SS500 External/Direct Contact Temp. Probe (2) Plug for Temp. Probe SS510 External/Direct Contact Temp. Probe, Teflon Coated (3) and Rod, RD100, Φ12.7 L390mm (4) and Rod, RD200, Φ12 L450mm (5) Holder / Clamp / Clip for Temp. Probe with Certificate & Traceability : Controlled by Serial Number, Certificate, Delivery- information, and Traceable Data Base System Digital Feedback Control by High-Performance Microprocessor Patented Jog-Shuttle Control System * User s Self-Compensation Function : to Control Difference between Real Temp. * and Indicated Temp. (±20.0 ) * Accurate Temp. Control of the Sample in the Vessel using PT100 Sensor (Optional) * orage Function for the set Values : Temp. and Timer * Locking Mode Supported for Experimental Safety (Input to Jog-Shuttle can be Disabled) * Superior Temperature Uniformity : less than10% on the Plate at Ambient Temperature Spec. Model (a) MSH-20D (b) MSH-30D Plate Size(mm) 180 180mm Plate-type 260 260mm Plate-type Material Body Powder Coated Aluminum Powder Coated steel Plate Ceramic Coated Aluminum (Chemical / Acid Resistance, Easy to Clean) irring Capa. & Motor Rating Max. 20 Lit., 9 / 4 W Speed & Control Resolution 80 ~ 1,500 rpm, 5 rpm Temp. Range & Accuracy Max. 380, ±0.3 at Set Temperature Temp. Resolution 0.1 -Display, 0.5 -Control Temp. Uniformity Specially Designed Heating Module : Temp. Difference 10% less Heating Power/Consumption 600W 1.2 kw Timer & Alarm 99hr 59min (with Continuous run.), Error status & Timer-end Display Digital LCD with Back-Light Function Digital Feedback with Jog Shuttle Switch (Turn+Push) irring Bar 3cm bar-included, Usable : up to 5cm bar Safety Circuit Over Temp. Protection Permissible Temp. & RH % Ambient +5 ~ 50, 85% RH Dimension & Weight 206 307 h99mm, 3.3kg 286 387 h99mm, 3.5kg Packing Size & Gross Weight 400 280 h200mm, 5kg 430 320 h200mm, 5kg Unit Only 230V DH.WMH03020 DH.WMH03022 120V DH.WMH02020 DH.WMH02022 Price, Each. 270,000 445,000 * External Temp. Probe Package-set 230V DH.WMH03021 DH.WMH03023 120V DH.WMH02021 DH.WMH02023 Price, Each. 338,000 541,000 * Other Specifications are available upon Customer s Request. Component of Package-set * MSH-20D Package-set : Complete with 1 Hotplate Unit 2 : SS500 PT100 External / Direct Contact Temp. Probe, 3 RD200 ainless steel Support Rod Φ12 L450mm 4 CL220 Holder+Clamp for External Temp. Probe * MSH-30D Package-set : Complete with 1 Hotplate Unit 2 : SS500 PT100 External / Direct Contact Temp. Probe, 3 RD100 ainless steel Support Rod Φ12 L450mm 4 CL220 Holder+Clamp for External Temp. Probe Optional External Temp Probes/and Rods/Holder, Clamp. Clip DH.WHP503060 (1) Direct Contact Temp. Probe, SS500, PT100, 54,000 Probe Φ4 L250mm, Cable L190mm DH.WHP503061 (2) Direct Contact Teflon Coated Temp. Probe, 65,000 SS510, Probe Φ4 L250mm, Cable L190mm DH.WHP503011 (3) and Rod, RD100, ainless steel, Φ12.7 L450mm 10,000 for HP-30A/30D, MSH-30A/30D, Non-screw DH.WHP503036 (4) and Rod, RD200, ainless steel, Φ12 L450mm 20,000 for HP-20A/20D, MSH-20A/20D, MSH-50A/55A, MSH-50D/55D and SMHS, Screw DH.WHP503012 (5) Holder/ Clamp / Clip, CL220, for Temp. Probe 25,000

irrers, Magnetic with 380 Heating (Hotplate irrer) Articles Cat. No Description DAIHAN-brand 380 Analog Premium Hotplate irrer MSH-A, Ceramic-Coated Plate, 1,500 rpm, with Certi. & Traceability Built-in Linearity PWM, Superior Temperature Uniformity, Precise Control of Temp. & RPM, 180 180mm or 260 260mm 아날로그가열자력교반기, 우수한온도균일성, 세라믹코팅플레이트 irring-hotplate Ceramic Coated Plate 260mm 180mm 180mm PWM Control System ~380 / 1,500rpm 260mm ir Bar (a) 180 180mm Plate-type Hotplate irrer MSH-20A (b) 260 260mm Plate-type Hotplate irrer MSH-30A (1) and Rod, RD100, Φ12.7 L390mm (2) and Rod, RD200, Φ12 L450mm (3) Holder / Clamp / Clip for Temp. Probe Specialized Features ~380 / 1,500rpm ir Bar with Certificate & Traceability : Controlled by Serial Number, Certificate, Delivery- information, and Traceable Data Base System Superior Temperature Uniformity : Less than 10% on the Plate at Ambient Temperature Superior Linearity for Temperature Control & irring Speed Ceramic Coated Plate-Chemical / Acid Resistance * Excellent for Sample Drying and most General Lab Heating Applications * Superior Temperature Uniformity : Less than 10% on the Plate at Ambient Temperature * Superior Linearity for Temperature Control & irring Speed by Specially Designed Control Circuitry.(PWM Control) * Smart Design of Body made by Aluminum Die-Casting (MSH-20A) * Ceramic Coated Plate-Chemical/Acid Resistance * Maximum Temperature of 380 Spec. Model (a) MSH-20A (b) MSH-30A Plate Size 180 180mm Plate-type 260 260mm Plate-type Material Body Powder Coated Aluminum Powder Coated steel Plate Ceramic Coated Aluminum (Chemical / Acid Resistance, Easy to Clean) irring Capa. & Motor Rating Max. 20 Lit., 9 / 4 W Speed Range Max. 1,500 rpm Temp. Range Max. 380 Temp. Uniformity Specially Designed Heating Module : Temp. Difference 10% less Heating Power/Consumption 600W 1.2 kw Superior Linearity PWM irring Bar 3cm bar-included, Usable : up to 5cm bar Permissible Temp. & RH % Ambient +5 ~ 50, 85% RH Dimension & Weight 206 307 h99mm, 2.8kg 286 387 h99mm, 3.3kg Packing Size & Gross Weight 400 280 h200mm, 5kg 430 320 h200mm, 5kg 230V DH.WMH03120 DH.WMH03121 120V DH.WMH02120 DH.WMH02121 Price, Each. 175,000 389,000 * Other Specifications are available upon Customer s Request. Optional and Rod & Holder/Clamp DH.WHP503011 (1) and Rod, RD100, ainless steel, Non-screw 10,000 Φ12.7 L390mm, for HP-30A/30D, MSH-30A/30D DH.WHP503036 (2) and Rod, RD200, ainless steel, 1.5p screw, 20,000 Φ12 L450mm, for HP-20A/20D, MSH-20A/20D, MSH-50A/55A, MSH-50D/55D and SMHS DH.WHP503012 (3) Holder / Clamp / Clip, CL220, for Temp. Probe 25,000 High ability in Very Low & High-Temperature General analog control DAIHAN General Phase Control Use with AC!! (Very sensitive Point) PWM Control Use with DC!! (Super linearity) Realize able & Easy to Use! Long Life Power & Mechanism! SMPS (Switching Mode Power Supply) Use with Safety & Regular DC!! AC able DC!! SSR (Solid ate Relay)-Non Contact No Electronic Harm! Realize Long Life Cycle!

irrers, Magnetic with 350 Heating (Hotplate irrer), Systematic Multi Cat. No Description Articles DAIHAN-brand 350 Systematic Multi-Hotplate irrers SMHS, 3- or 6-Places, Ceramic-Coated Plates with Digital Feedback Control, Independent Heating & irring Control, up to 350, 80~1,500 rpm 멀티가열자력교반기, 우수한온도균일성, 3- or 6- 구개별조절가능 140mm ir Bar (a) 3 1 Plates-type Multi-Hotplate irrer SMHS-3 140mm ir Bar irring-hotplate 140mm Back Light LCD 140mm Back Light LCD ~350 / 1,500rpm Patented Jog-Shuttle Control System ~350 / 1,500rpm Patented Jog-Shuttle Control System (b) 3 2 Plates-type Multi-Hotplate irrer SMHS-6 (1) Plug for Temp. Probe SS500 External/Direct Contact Temp. Probe (2) Plug for Temp. Probe SS510 External/Direct Contact Temp. Probe, Teflon Coated (3) and Rod, RD200, Φ12 L450mm (4) Holder / Clamp / Clip for Temp. Probe with Certificate & Traceability : Controlled by Serial Number, Certificate, Delivery-information, and Traceable Data Base System Excellent for Multi-use and wide range Sample Testing Patented Jog-Shuttle Control System * Systemized 3- and 6-Hotplate irrer * Independent Heating and irring Control * Digital Feedback Control by High-Performance Microprocessor * Ceramic Coated Plate-Chemical/Acid Resistance * Maximum Temperature of 350 with ±0.3 Control Accuracy * Accurate Temp. Control of the Sample in the Vessel using PT100 Sensor (Optional) * Digital LCD with Back-Light Function * Digital Timer Function Included : 99 hr 59 min * orage Function for the Set Values : Temperature, RPM and Timer * Locking Mode for Experimental Safety Supported Spec. Model (a) SMHS-3 (b) SMHS-6 Plate-type 3 1 Plates-type 3 2 Plates-type Material 230V DH.WMH03503 DH.WMH03506 120V DH.WMH02503 DH.WMH02506 Price, Each. 851,000 1,598,000 * Other Specifications are available upon Customer s Request. Plate : Ceramic Coated Aluminum, Body : Powder Coated steel Plate Size(mm) 140 140 irring Capa. & Motor Rating Max. 20 Lit.(H 2O), 9/4W 3 Max. 20 Lit.(H 2O), 9/4W 6 Speed & Control Resolution Temp. Range & Accuracy Temp. Resolution Temp. Uniformity 80 ~ 1,500 rpm, 5 rpm Max. 350, ±0.3 at Set Temp. 0.1 -Display, 0.5 -Control Specially Designed Heating Module : Temp. Difference 10% less Heating Power/Consumption 400 W 3 Plates 400 W 6 Plates Timer & Alarm Display irring Bar Permissible Temp. & RH % 99hr 59min (with Continuous run.), Error status & Timer-end Digital LCD with Back-Light Function Digital Feedback with Jog Shuttle Switch (Turn+Push) 3cm bar-included, Usable : up to 5cm bar Room Temp. +5 ~ 50, 85% RH Dimension & Weight 510 240 h100mm, 10kg 510 410 h180mm, 18kg Packing Size & Gross Weight 540 330 h170mm, 10kg 570 540 h230mm, 18kg 3 Rear Hotplate irrer SMHS-6 have 3 Ports available to connect External Temp. Probe. Optional External Temp Probes/and Rods/Holder, Clamp. Clip 운임약 9.000 별도! DH.WHP503060 (1) Direct Contact Temp. Probe, SS500, PT100, 54,000 Probe Φ4 L250mm, Cable L190mm DH.WHP503061 (2) Direct Contact Teflon Coated Temp. Probe, 65,000 SS510, Probe Φ4 L250mm, Cable L190mm DH.WHP503036 (3) and Rod, RD200, ainless-steel, Φ12 L450mm 20,000 for HP-20A/20D, MSH-20A/20D, MSH-50A/55A, MSH-50D/55D and SMHS, 1.5p Screw DH.WHP503012 (4) Holder / Clamp / Clip, CL220, for Temp. Probe 25,000

irrers, Overhead/Selection Guide Articles Cat. No Description DAIHAN-brand Overhead irrer Product Line / Selection Guide Speed & Torque High Speed High Torque Control Analog Model Digital Model Analog Model Digital Model -type Integrated Integrated Remote Integrated Integrated Remote Models HS-50A HS-120A HS-30D HS-100D HS-30T HS-100T HT-50AX HT-120AX HT-50DX HT-120DX HT-50T HT-120T HT-140T Max. Capacity(H2O) 10 Lit. 20 Lit. 10 Lit. 20 Lit. 10 Lit. 20 Lit. 40 Lit. 60 Lit. 40 Lit. 60 Lit. 50 Lit. 80 Lit. 100 Lit. Max. Viscosity(mPas) 10,000 50,000 10,000 50,000 10,000 50,000 100,000 150,000 100,000 150,000 100,000 150,000 160,000 Motor Rating (Input / Output) 83/75W (1/10 hp) 130/120W (1/6 hp) 83/75W (1/10 hp) 130/120W (1/6 hp) 83/75W (1/10 hp) 130/120W (1/6 hp) 83/75W (1/10 hp) 130/120W (1/6 hp) 83/75W (1/10 hp) 130/120W (1/6 hp) 83/75W (1/10 hp) 130/120W (1/6 hp) Max. Torque(Ncm) 85 145 85 145 85 145 300 500 300 500 300 500 550 Impeller Dia.(mm) 8 10 Speed Range (rpm) 200 ~ 3,000 50 ~ 1,000 Motor Rating (In / Out) Direct Driven Motor 3.5:1 Ratio Worm-Geared Motor Analog Phase Digital Feedback with Jog Shuttle Switch(Turn+Push) Digital Feedback with Jog Shuttle Switch(Turn+Push), Remote type Analog Phase Digital Feedback with Jog Shuttle Switch (Turn+Push) 130/120W (1/6 hp) Digital Feedback with Jog Shuttle Switch (Turn+Push), Remote type Display None Digital LCD (Timer, RPM & Power Bar-graph) None Digital LCD (Timer, RPM & Power Bar-graph) Operating Environment Safety Device Body Dimension (w d h mm) Ambient Temp. Range ( ) Max. Permissible Humidity(%) Over Heat Protector for motor Over Load & Heat Protector for motor 90 145 180 90 100 180 0 ~ 40 80 Over Heat Protector for motor 90 180 130 90 210 130 90 180 130 Over Load & Heat Protector for motor 90 210 130 155 180 110 155 230 110 Body Weight (kg) 4.5 5.3 4.5 5.3 3* 3.8* 3.5 4 3.5 4 3.5 4 4 Others - Smooth art and Change of the irring Speed for stable running - orage Function (RPM & Timer) : Only Digital Models Power Supply ** * Weight of Remote = 2.5kg ** Other Specifications are Available Upon Customer's Request. - Smooth art and Change of the irring Speed for stable running - orage Function (RPM & Timer) : Only Digital Models - Locking Mode (Jog-Shuttle Input disabled) : Only Digital Models - Alarm (Error atus and Timer-end) : Only Digital Models AC 230V, 50/60Hz 155 230 110 andard Viscosity Material Viscosity Recommended Models Water 1 Milk 3 Soybean oil 160 HS-30D Varnish 500 HS-50A HS-30T Lacquer 1,000 HS-100D HS-120A Honey 3,000 HT-50DX HS-100T HT-120DX HT-50AX HT-120AX andard Viscosity 10,000 HT-50T HT-120T andard Viscosity 15,000 HT-140T Ketchup 30,000 andard Viscosity 50,000 Mustard 70,000 - Corn Syrup 100,000 - andard Viscosity 150,000 - Peanut Butter 250,000 - (Unit : mpas)

irrers, Overhead / High-Speed Cat. No Description Articles DAIHAN-brand High-Speed Analog Overhead irrers HS-A, for Low-/Middle-Viscosity, Max.10/20Lit, Max. 3,000rpm with Push-Through Shaft(Φ8mm or Less) and Chuck grip Φ3~10mm, Flex-Coupling Φ6~12mm, up to 50,000 mpas 아날로그고속교반기, 저 / 중점도용, 사용교반봉 ; 1 기본은 Φ3~10mm, 2 관통은 Φ3~8mm, & 3 별도의 Flex-Coupling 활용시 Φ6~12mm Push-Through Shafts Φ8mm or Less S721 Impeller included and (KA1177) irrer Unit (HS-50A) Clamp (CL200) ainless-steel Chuck, Φ2~10mm Grip Max. 10 Lit. (H2O) Hi-Speed Analog Overhead irrer HS-50A -Set The Figure ; Use of Coupling ir-motor ~3,000rpm Ensure Minimize RPM Fluctuation : Very able irring Speed(RPM) Performance with Certificate & Traceability : Controlled by Serial Number, Certificate, Delivery-information, and Traceable Data Base System Push-Through Shafts(Φ8mm or Less) ; Ideal for Raising or Lowering of the ir-shafts without Moving the Motor Head - Adjustable Height of Shaft Ideal for Low-/Middle-Viscosity * Easy-to-use Dial for Speed Setting * Smooth art and Change of the irring Speed * ainless-steel Chuck : Grip Φ3~10mm Spec. Models (1) HS-50A (2) HS-120A irring Capacity Max. 10 Lit. (H2O) Max. 20 Lit. (H2O) Maximum Viscosity / Torque 10,000 mpas / 85 Ncm 50,000 mpas / 145 Ncm Speed Range & Motor 0 ~ 3,000 rpm, Direct Driven DC Motor Motor Rating (Input / Output) 83 / 75 W, 1 / 10 HP 130 / 120 W, 1 / 6 HP / Safety Device Analog Phase / Over Heat Protector for motor Chuck Grip Capa. Φmm dia Φ3~10mm Shafts Push-Through Shafts dia Φ8mm or Less Permissible Temp. & Humidity 0 ~ 40, 80% Material ABS and Aluminum Dimension & Weight 90 145 h180mm, 4.5 kg 90 145 h180mm, 5.3 kg Packing Size & Gross Weight 320 300 h180mm, 5 kg 320 300 h180mm, 8 kg Power Consumption 85 W 130 W and Package-set 230V DH.WOS01211 DH.WOS01216 120V DH.WOS02211 DH.WOS02216 Price, Each. 394,000 400,000 Unit-only 230V DH.WOS01210 DH.WOS01215 120V DH.WOS02210 DH.WOS02215 Price, Each. 297,000 326,000 * Other Specifications are available upon Customer s Request. * HS-50A Package-set : Complete with 1 HS-50A irrer Unit, 2 S721 ainless-steel Impeller (Rod Φ8 L500mm, 3-Blade Φ50mm), 3 CL200 Clamp, and 4 KA1177 Safety and (Rod Φ23 L800mm, Base w34 d29cm) * HS-120A Package-set : Complete with 1 HS-120A irrer Unit, 2 S723 ainless-steel Impeller (Rod Φ8 L650mm, 3-Blade Φ80mm), 3 CL200 Clamp, and 4 KA1177 Safety and (Rod Φ23 L800mm, Base w34 d29cm) Chuck-Rod Exchangeable Chuck Flexible- Coupling ir-shafts (1) Hi-flex Metal (2) Rubber Based for Φ6 ~ 12 Shafts for Φ7 ~ 10 Shafts Flexible Couplings, for Safety irring of Φ6~12mm Shafts of Overhead irrers for irrers between irring Motor and Shaft, 안전교반용유연성커플링 Used to Compensate Any Vibrations Between The Motor and irring Shafts (1) UTILITY High-Flex. Metal Coupling, with 2 Flex-band, for Φ6~12mm ir-shafts (1) Ideal for Low/High Viscosity and High/Low Speed * Made in Korea * Shaft Fastening by Screw Clamp Band * Made of DURALUMIN * with Exchangeable STS Chucking Rod Φ8 & 10mm, L40mm SL.iC011 ir-coupling, Hi-flex, Φ8mm Chuck-rod, for-φ6mm ir-shaft, 56g, Φ25 h44mm 60,500 SL.iC012 ir-coupling, Hi-flex, Φ8mm Chuck-rod, for-φ8mm ir-shaft, 53g, Φ25 h44mm 60,500 SL.iC013 ir-coupling, Hi-flex, Φ8mm Chuck-rod, for-φ10mm ir-shaft, 49g, Φ25 h44mm 60,500 SL.iC014 ir-coupling, Hi-flex, Φ10mm Chuck-rod, for-φ8mm ir-shaft, 49g, Φ25 h44mm 60,500 SL.iC015 ir-coupling, Hi-flex, Φ10mm Chuck-rod, for-φ10mm ir-shaft, 43g, Φ25 h44mm 60,500 SL.iC016 ir-coupling, Hi-flex, Φ10mm Chuck-rod, for-φ12mm ir-shaft, 33g, Φ25 h44mm 60,500 (2) Very Flexible Rubber Based Coupling, for Φ7~10mm Shafts (2) Especially, Ideal for GLASS Shafts and Low/Middle Viscosity & High Speed * Made in Germany * Shaft Fastening by Screw Compression Rubber Ring Pad. * with Φ10 L40mm Exchangeable ainless-steel Chucking Rod WI.1445000 ir-coupling, Rubber Based, for Φ7 ~ Φ10mm Shafts, 72.5g, Body Φ46 h80mm 186,800 Note! Details of Wide-Range Couplings : See the irrer Accessories

irrers, Overhead / High-Speed Articles Cat. No Description DAIHAN-brand High-Speed Digital Overhead irrers HS-D, for Low-/Middle-Viscosity, Max.10/20Lit, Max. 3,000rpm with Push-Through Shaft(Φ8mm or Less) and Chuck grip Φ3~10mm, Flex-Coupling Φ6~12mm, up to 50,000 mpas 디지털고속교반기, 저 / 중점도용, 사용교반봉 ; 1 기본은 Φ3~10mm, 2 관통은 Φ3~8mm, & 3 별도의 Flex-Coupling 활용시 Φ6~12mm Push-Through Shafts Φ8mm or Less S721 Impeller included Max. 10 Lit. (H2O) Hi-Speed Digital Overhead irrer HS-30D -Set The Figure ; Use of Coupling ~3,000rpm irrer Unit (HS-30D) Clamp (CL200) Back light LCD Patented Jog-Shuttle Control System ainless-steel Chuck, Φ2~10mm Grip and (ST110) Ensure Minimize RPM Fluctuation : Very able irring Speed(RPM) Performance with Certificate & Traceability : Controlled by Serial Number, Certificate, Delivery-information, and Traceable Data Base System Push-Through Shafts(Φ8mm or Less) ; Ideal for Raising or Lowering of the ir-shafts without Moving the Motor Head - Adjustable Height of Shaft Ideal for Low-/Middle-Viscosity Patented Jog-Shuttle Control System * Smooth art and Change of the irring Speed * ainless-steel Chuck : Grip Φ3~10mm Spec. Models (1) HS-30D (2) HS-100D irring Capacity Max. 10 Lit. (H2O) Max. 20 Lit. (H2O) Maximum Viscosity / Torque 10,000 mpas / 85 Ncm 50,000 mpas / 145 Ncm Speed Range & Resolution 200 ~ 3,000 rpm, 1 rpm-display / 1 rpm-control Motor / Safety Device Direct Driven DC Motor / Overload & Heat Protector for Motor Motor Rating (Input / Output) 83 / 75 W, 1 / 10 HP 130 / 120 W, 1 / 6 HP Timer & Alarm 99hr 59min (with Continuous run.), Error status & Timer-end / Display Digital Feedback / Digital LCD with Back-Light Function Chuck Grip Capa. Φmm dia Φ3~10mm Shafts Push-Through Shafts dia Φ8mm or Less Permissible Temp. & Humidity 0 ~ 40, 80% Material ABS and Aluminum Dimension & Weight 90 145 h180mm, 4.5 kg 90 145 h180mm, 5.3 kg Packing Size & Gross Weight 320 300 h180mm, 5 kg 320 300 h180mm, 8 kg Power Consumption 85 W 130 W and Package-set 230V DH.WOS01016 DH.WOS01026 120V DH.WOS02016 DH.WOS02026 Price, Each. 441,000 486,000 Unit-only 230V DH.WOS01015 DH.WOS01025 120V DH.WOS02015 DH.WOS02025 Price, Each. 338,000 367,000 * Other Specifications are available upon Customer s Request. Chuck-Rod Exchangeable ir-motor Chuck Flexible- Coupling ir-shafts (1) Hi-flex Metal (2) Rubber Based for Φ6 ~ 12 Shafts for Φ7 ~ 10 Shafts * HS-30D Package-set : Complete with 1 HS-30D irrer Unit, 2 S721 ainless-steel Impeller (Rod Φ8 L500mm, 3-Blade Φ50mm), 3 CL200 Clamp, and 4 ST110 andard Plate and(rod Φ16 L800mm, Base w20 d35cm) * HS-100D Package-set : Complete with 1 HS-100D irrer Unit, 2 S723 ainless-steel Impeller (Rod Φ8 L650mm, 3-Blade Φ80mm), 3 CL200 Clamp, and 4 ST120 Wide Plate and(rod Φ23 L1,000mm, Base w30 d40cm) Flexible Couplings, for Safety irring of Φ6~12mm Shafts of Overhead irrers for irrers between irring Motor and Shaft, 안전교반용유연성커플링 Used to Compensate Any Vibrations Between The Motor and irring Shafts (1) UTILITY High-Flex. Metal Coupling, with 2 Flex-band, for Φ6~12mm ir-shafts (1) Ideal for Low/High Viscosity and High/Low Speed * Made in Korea * Shaft Fastening by Screw Clamp Band * Made of DURALUMIN * with Exchangeable STS Chucking Rod Φ8 & 10mm, L40mm SL.iC011 ir-coupling, Hi-flex, Φ8mm Chuck-rod, for-φ6mm ir-shaft, 56g, Φ25 h44mm 60,500 SL.iC012 ir-coupling, Hi-flex, Φ8mm Chuck-rod, for-φ8mm ir-shaft, 53g, Φ25 h44mm 60,500 SL.iC013 ir-coupling, Hi-flex, Φ8mm Chuck-rod, for-φ10mm ir-shaft, 49g, Φ25 h44mm 60,500 SL.iC014 ir-coupling, Hi-flex, Φ10mm Chuck-rod, for-φ8mm ir-shaft, 49g, Φ25 h44mm 60,500 SL.iC015 ir-coupling, Hi-flex, Φ10mm Chuck-rod, for-φ10mm ir-shaft, 43g, Φ25 h44mm 60,500 SL.iC016 ir-coupling, Hi-flex, Φ10mm Chuck-rod, for-φ12mm ir-shaft, 33g, Φ25 h44mm 60,500 (2) Very Flexible Rubber Based Coupling, for Φ7~10mm Shafts (2) Especially, Ideal for GLASS Shafts and Low/Middle Viscosity & High Speed * Made in Germany * Shaft Fastening by Screw Compression Rubber Ring Pad. * with Φ10 L40mm Exchangeable ainless-steel Chucking Rod WI.1445000 ir-coupling, Rubber Based, for Φ7 ~ Φ10mm Shafts, 72.5g, Body Φ46 h80mm 191,490 Note! Details of Wide-Range Couplings : See the irrer Accessories

irrers, Overhead / High-Speed Cat. No Description Articles DAIHAN-brand Remote Controlled High-Speed Digital Overhead irrer HS-T, for Low-/Middle-Viscosity, Max. 3,000 rpm with Push-Through Shaft(Φ8mm or Less) and Chuck grip Φ3~10mm, Flex-Coupling Φ6~12mm, up to 50,000 mpas 원격조절식디지털고속교반기, 저 / 중점도용, 사용교반봉 ; 1 기본은 Φ3~10mm, 2 관통은 Φ3~8mm, & 3 별도의 Flex-Coupling 활용시 Φ6~12mm Push-Through Shafts Φ8mm or Less S721 Impeller included and (ST110) ~3,000rpm irrer Unit (HS-30T) Clamp (CL200) ainless-steel Chuck, Φ2~10mm Grip Remote Max. 10 Lit. (H2O) Hi-Speed Digital Overhead irrer, with Remote HS-30T Package-set The Figure ; Use of Coupling ir-motor Ensure Minimize RPM Fluctuation : Very able irring Speed(RPM) Performance with Certificate & Traceability : Controlled by Serial Number, Certificate, Delivery-information, and Traceable Data Base System Push-Through Shafts(Φ8mm or Less) ; Ideal for Raising or Lowering of the ir-shafts without Moving the Motor Head - Adjustable Height of Shaft Ideal for Low-/Middle-Viscosity Patented Jog-Shuttle Control System * Smooth art and Change of the irring Speed * ainless-steel Chuck : Grip Φ3~10mm Spec. Model (1) HS-30T (2) HS-100T irring Capacity Max. 10 Lit. (H2O) Max. 20 Lit. (H2O) Maximum Viscosity / Torque 10,000 mpas / 85 Ncm 50,000 mpas / 145 Ncm Speed Range & Motor 200 ~ 3,000 rpm, Direct Driven DC Motor Motor Rating (Input / Output) 83 / 75 W, 1/10 HP 130 / 120 W, 1/6 HP Timer & Alarm 99hr 59min (with Continuous run.), Timer-end Alarm / Display Digital Feedback / Digital LCD with Back-Light Function Chuck Grip Capa. Φmm dia Φ3~10mm Shafts Push-Through Shafts dia Φ8mm or Less Permissible Temp. & Humidity 0 ~ 40, 80% Safety Device / Material Overload & Heat Protector for motor / ABS and Aluminum Dimension & Weight* 90 100 h180mm, 3 kg 90 100 h180mm, 3.8 kg Packing Size & Gross Weight 580 340 h230mm, 5 kg 580 340 h230mm, 8 kg Power Consumption 75 W 120 W and Package-set 230V DH.WOS01036 DH.WOS01046 120V DH.WOS02036 DH.WOS02046 Price, Each. 589,000 633,000 Unit & Remote 230V DH.WOS01035 DH.WOS01045 120V DH.WOS02035 DH.WOS02045 Price, Each. 486,000 471,000 * Weight of Remote = 2.5kg ** Other Specifications are available upon Customer s Request. * HS-30T Package-set : Complete with 1 HS-30T irrer Unit with Remote, 2 S721 ainless-steel Impeller(Rod Φ8 L500mm, 3-Blade Φ50mm), 3 CL200 Clamp, and 4 ST110 andard Plate and(rod Φ16 L800mm, Base w20 d35cm) * HS-100T Package-set : Complete with 1 HS-100T irrer Unit with Remote, 2 S723 ainless-steel Impeller(Rod Φ8 L650mm, 3-Blade Φ80mm), 3 CL200 Clamp, and 4 ST120 Wide Plate and(rod Φ23 L1,000mm, Base w30 d40cm) Chuck-Rod Exchangeable Chuck Flexible- Coupling ir-shafts (1) Hi-flex Metal (2) Rubber Based for Φ6 ~ 12 Shafts for Φ7 ~ 10 Shafts Flexible Couplings, for Safety irring of Φ6~12mm Shafts of Overhead irrers for irrers between irring Motor and Shaft, 안전교반용유연성커플링 Used to Compensate Any Vibrations Between The Motor and irring Shafts (1) UTILITY High-Flex. Metal Coupling, with 2 Flex-band, for Φ6~12mm ir-shafts (1) Ideal for Low/High Viscosity and High/Low Speed * Made in Korea * Shaft Fastening by Screw Clamp Band * Made of DURALUMIN * with Exchangeable STS Chucking Rod Φ8 & 10mm, L40mm SL.iC011 ir-coupling, Hi-flex, Φ8mm Chuck-rod, for-φ6mm ir-shaft, 56g, Φ25 h44mm 60,500 SL.iC012 ir-coupling, Hi-flex, Φ8mm Chuck-rod, for-φ8mm ir-shaft, 53g, Φ25 h44mm 60,500 SL.iC013 ir-coupling, Hi-flex, Φ8mm Chuck-rod, for-φ10mm ir-shaft, 49g, Φ25 h44mm 60,500 SL.iC014 ir-coupling, Hi-flex, Φ10mm Chuck-rod, for-φ8mm ir-shaft, 49g, Φ25 h44mm 60,500 SL.iC015 ir-coupling, Hi-flex, Φ10mm Chuck-rod, for-φ10mm ir-shaft, 43g, Φ25 h44mm 60,500 SL.iC016 ir-coupling, Hi-flex, Φ10mm Chuck-rod, for-φ12mm ir-shaft, 33g, Φ25 h44mm 60,500 (2) Very Flexible Rubber Based Coupling, for Φ7~10mm Shafts (2) Especially, Ideal for GLASS Shafts and Low/Middle Viscosity & High Speed * Made in Germany * Shaft Fastening by Screw Compression Rubber Ring Pad. * with Φ10 L40mm Exchangeable ainless-steel Chucking Rod WI.1445000 ir-coupling, Rubber Based, for Φ7 ~ Φ10mm Shafts, 72.5g, Body Φ46 h80mm 191,490 Note! Details of Wide-Range Couplings : See the irrer Accessories

irrer, Overhead / High-Torque Articles Cat. No Description DAIHAN-brand High-Torque Analog Overhead irrer HT-AX, for Middle-/High-Viscosity, Max.50-/80-Lit, Max.1,000rpm with Push-Through Shaft(Φ10mm or Less) and Chuck grip 6~12mm, Flex-Coupling Φ6~16mm, 150,000 mpas 아날로그중 / 고점도용강력교반기, 사용교반봉 ; 1 기본은 Φ6~12mm, 2 관통은 Φ6~10mm, & 3 별도의 Flex-Coupling 활용시 Φ6~16mm Push-Through Shafts Φ10mm or Less S736 Impeller included ~1,000rpm irrer Unit (HT-120AX) Clamp (CL200) Ensure Minimize RPM Fluctuation : Very able irring Speed(RPM) Performance with Certificate & Traceability : Controlled by Serial Number, Certificate, Deliveryinformation, and Traceable Data Base System 3.5:1 Ratio Worm-geared Motor Push-Through Shafts(Φ10mm or Less) ; Ideal for Raising or Lowering of the ir-shafts without Moving the Motor Head - Adjustable Height of Shaft * Ideal for Middle-/High-Viscosity * Easy-to-use Dial for Speed Setting * Smooth art and Change of the irring Speed * ainless-steel Chuck : Grip Φ6~12mm ainless-steel Chuck, Φ6~12mm Grip Max. 80 Lit. (H2O) Hi-Torque Analog Overhead irrer, HT-120AX The Figure ; Use of Coupling Spec. Model (1) HT-50AX (2) HT-120AX irring Capacity Max. 50 Lit. (H2O) Max. 80 Lit. (H2O) Maximum Viscosity / Torque 100,000 mpas / 300 Ncm 150,000 mpas / 500 Ncm Speed Range & Motor 0 ~ 1,000 rpm, Worm-Geared DC Motor (3.5:1 Ratio) Motor Rating (Input / Output) 83 / 75 W, 1 / 10 HP 130 / 120 W, 1 / 6 HP Analog Phase Chuck Grip Capa. Φmm dia Φ6~12mm Shafts Push-Through Shafts dia Φ10mm or Less Permissible Temp. & Humidity 0 ~ 40, 80% Safety Device / Material Over Heat Protector for motor / ABS and Aluminum Dimension & Weight 90 180 h130mm, 3.5 kg 90 210 h130mm, 4 kg Packing Size & Gross Weight 320 300 h180mm, 5 kg 320 300 h180mm, 8 kg Power Consumption 85 W 130 W and Package-set 230V DH.WOS01252 DH.WOS01272 120V DH.WOS02252 DH.WOS02272 Price, Each. 454,000 516,000 Unit-only 230V DH.WOS01251 DH.WOS01271 120V DH.WOS02251 DH.WOS02271 Price, Each. 356,000 417,000 * Other Specifications are available upon Customer s Request. Chuck-Rod Exchangeable ir-motor Chuck Flexible- Coupling ir-shafts (1) Hi-flex Metal (2) Heavy-duty Metal for Φ6 ~ 16 Shafts for Φ10 ~ 16 Shafts Details of Wide-Range Couplings : See the irrer Accessories * HT-50AX Package-set : Complete with 1 HT-50AX irrer Unit, 2 S732 ainless-steel Impeller(Rod Φ8 L500mm, 4-Blade Φ70mm), 3 CL200 Clamp, and 4 KA1177 Safety and(rod Φ23 L800mm, Base w34 d29cm) * HT-120AX Package-set : Complete with 1 HT-120AX irrer Unit, 2 S736 ainless-steel Impeller(Rod Φ10 L650mm, 4-Blade Φ90mm), 3 CL200 Clamp, and 4 KA1177 Safety and(rod Φ23 L800mm, Base w34 d29cm) Flexible Couplings, for Safety irring of Φ6~16mm Shafts of Overhead irrers for irrers between irring Motor and Shaft, 안전교반용유연성커플링 Used to Compensate Any Vibrations Between The Motor and irring Shafts * Shaft Fastening by Screw Clamp Band * Made in Korea * Made of DURALUMIN * with Exchangeable STS Chucking Rod Φ8 / 10 / 12mm, L40mm (1) UTILITY High-Flex. Metal Coupling, with 2 Flex-band, for Φ6~16mm ir-shafts (1) Ideal for Low/High Viscosity and High/Low Speed SL.iC011 ir-coupling, Hi-flex, Φ8mm Chuck-rod, for-φ6mm ir-shaft, 56g, Φ25 h44mm 60,500 SL.iC012 ir-coupling, Hi-flex, Φ8mm Chuck-rod, for-φ8mm ir-shaft, 53g, Φ25 h44mm 60,500 SL.iC013 ir-coupling, Hi-flex, Φ8mm Chuck-rod, for-φ10mm ir-shaft, 49g, Φ25 h44mm 60,500 SL.iC014 ir-coupling, Hi-flex, Φ10mm Chuck-rod, for-φ8mm ir-shaft, 49g, Φ25 h44mm 60,500 SL.iC015 ir-coupling, Hi-flex, Φ10mm Chuck-rod, for-φ10mm ir-shaft, 43g, Φ25 h44mm 60,500 SL.iC016 ir-coupling, Hi-flex, Φ10mm Chuck-rod, for-φ12mm ir-shaft, 33g, Φ25 h44mm 60,500 SL.iC017 ir-coupling, Hi-flex, Φ12mm Chuck-rod, for-φ10mm ir-shaft, 33g, Φ25 h44mm 60,500 SL.iC018 ir-coupling, Hi-flex, Φ12mm Chuck-rod, for-φ12mm ir-shaft, 123g, Φ32 h60mm 72,600 SL.iC019 ir-coupling, Hi-flex, Φ12mm Chuck-rod, for-φ14mm ir-shaft, 120g, Φ32 h60mm 72,600 SL.iC020 ir-coupling, Hi-flex, Φ12mm Chuck-rod, for-φ16mm ir-shaft, 118g, Φ32 h60mm 72,600 (2) Heavy-duty Metal Coupling, with Short Flex-band, for Φ10~16mm ir-shafts (2) Low-Flexible type, Ideal for High Viscosity and Middle/Low Speed SL.iC023 ir-coupling, Low-flex, Φ10mm Chuck rod, for-φ10mm ir-shafts., 45g, Φ25 h30 30,500 SL.iC024 ir-coupling, Low-flex, Φ10mm Chuck rod, for-φ12mm ir-shafts., 45g, Φ25 h30 30,500 SL.iC025 ir-coupling, Low-flex, Φ12mm Chuck rod, for-φ12mm ir-shafts., 105g, Φ32 h38 40,660 SL.iC026 ir-coupling, Low-flex, Φ12mm Chuck rod, for-φ14mm ir-shafts., 105g, Φ32 h38 40,660 SL.iC027 ir-coupling, Low-flex, Φ12mm Chuck rod, for-φ16mm ir-shafts., 105g, Φ32 h38 40,660

irrers, Overhead / High-Torque Cat. No Description Articles DAIHAN-brand High-Torque Digital Overhead irrer HT-DX, for Middle-/High-Viscosity, Max.50-/80-Lit, Max.1,000rpm with Push-Through Shaft(Φ10mm or Less) and Chuck grip 6~12mm, Flex-Coupling Φ6~16mm, 150,000 mpas 디지털중 / 고점도용강력교반기, 사용교반봉 ; 1 기본은 Φ6~12mm, 2 관통은 Φ6~10mm, & 3 별도의 Flex-Coupling 활용시 Φ6~16mm Push-Through Shafts Φ10mm or Less S732 Impeller included ~1,000rpm irrer Unit (HT-120DX) Clamp (CL200) Back light LCD Patented Jog-Shuttle Control System ainless-steel Chuck, Φ6~12mm Grip Max. 80 Lit. (H2O) Hi-Torque Digital Overhead irrer, HT-120DX Package-set HT-120DX Ensure Minimize RPM Fluctuation : Very able irring Speed(RPM) Performance with Certificate & Traceability : Controlled by Serial Number, Certificate, Deliveryinformation, and Traceable Data Base System 3.5:1 Ratio Worm-geared Motor Push-Through Shafts(Φ10mm or Less) ; Ideal for Raising or Lowering of the ir-shafts without Moving the Motor Head - Adjustable Height of Shaft Patented Jog-Shuttle Control System * Ideal for Middle-/High-Viscosity Spec. Model (1) HT-50DX (2) HT-120DX irring Capacity Max. 50 Lit. (H2O) Max. 80 Lit. (H2O) Maximum Viscosity / Torque 100,000 mpas / 300 Ncm 150,000 mpas / 500 Ncm Speed Range & Resolution 50 ~ 1,000 rpm, 1 rpm-display / 1 rpm-control Motor Worm-Geared DC Motor (3.5:1 Ratio) Motor Rating (Input / Output) 83 / 75 W, 1 / 10 HP 130 / 120 W, 1 / 6 HP Timer & Alarm 99hr 59min (with Continuous run.), Error status & Timer-end / Display Digital Feedback / Digital LCD with Back-Light Function Chuck Grip Capa. Φmm dia Φ6~12mm Shafts Push-Through Shafts dia Φ10mm or Less Permissible Temp. & Humidity 0 ~ 40, 80% Safety Device / Material Overload & Heat Protector for Motor / ABS and Aluminum Dimension & Weight 90 180 h130mm, 3.5 kg 90 210 h130mm, 4 kg Packing Size & Gross Weight 320 300 h180mm, 5 kg 320 300 h180mm, 8 kg Power Consumption 85 W 130 W and Package-set 230V DH.WOS01052 DH.WOS01072 120V DH.WOS02052 DH.WOS02072 Price, Each. 520,000 635,000 Unit-only 230V DH.WOS01051 DH.WOS01071 120V DH.WOS02051 DH.WOS02071 Price, Each. 400,000 470,000 * HT-50DX Package-set : Complete with 1 HT-50DX irrer Unit, 2 S732 ainless-steel Impeller (Rod Φ8 L500mm, 4-Blade Φ70mm), 3 CL200 Clamp, and 4 ST120 Wide Plate and (Rod Φ23 L1000mm, Base w30 d40cm) * HT-120DX Package-set : Complete with 1 HT-120DX irrer Unit, 2 S736 ainless-steel Impeller (Rod Φ10 L650mm, 4-Blade Φ90mm), 3 CL200 Clamp, and 4 ST200 Deluxe Safety and (Rod Φ23 L1200mm, Base w39 up to 75cm) Chuck-Rod Exchangeable (1) Hi-flex Metal (2) Heavy-duty Metal for Φ6 ~ 16 Shafts for Φ10 ~ 16 Shafts Details of Wide-Range Couplings : See the irrer Accessories Flexible Couplings, for Safety irring of Φ6~16mm Shafts of Overhead irrers for irrers between irring Motor and Shaft, 안전교반용유연성커플링 Used to Compensate Any Vibrations Between The Motor and irring Shafts * Shaft Fastening by Screw Clamp Band * Made in Korea * Made of DURALUMIN * with Exchangeable STS Chucking Rod Φ8 / 10 / 12mm, L40mm (1) UTILITY High-Flex. Metal Coupling, with 2 Flex-band, for Φ6~16mm ir-shafts (1) Ideal for Low/High Viscosity and High/Low Speed SL.iC011 ir-coupling, Hi-flex, Φ8mm Chuck-rod, for-φ6mm ir-shaft, 56g, Φ25 h44mm 60,500 SL.iC012 ir-coupling, Hi-flex, Φ8mm Chuck-rod, for-φ8mm ir-shaft, 53g, Φ25 h44mm 60,500 SL.iC013 ir-coupling, Hi-flex, Φ8mm Chuck-rod, for-φ10mm ir-shaft, 49g, Φ25 h44mm 60,500 SL.iC014 ir-coupling, Hi-flex, Φ10mm Chuck-rod, for-φ8mm ir-shaft, 49g, Φ25 h44mm 60,500 SL.iC015 ir-coupling, Hi-flex, Φ10mm Chuck-rod, for-φ10mm ir-shaft, 43g, Φ25 h44mm 60,500 SL.iC016 ir-coupling, Hi-flex, Φ10mm Chuck-rod, for-φ12mm ir-shaft, 33g, Φ25 h44mm 60,500 SL.iC017 ir-coupling, Hi-flex, Φ12mm Chuck-rod, for-φ10mm ir-shaft, 33g, Φ25 h44mm 60,500 SL.iC018 ir-coupling, Hi-flex, Φ12mm Chuck-rod, for-φ12mm ir-shaft, 123g, Φ32 h60mm 72,600 SL.iC019 ir-coupling, Hi-flex, Φ12mm Chuck-rod, for-φ14mm ir-shaft, 120g, Φ32 h60mm 72,600 SL.iC020 ir-coupling, Hi-flex, Φ12mm Chuck-rod, for-φ16mm ir-shaft, 118g, Φ32 h60mm 72,600 (2) Heavy-duty Metal Coupling, with Short Flex-band, for Φ10~16mm ir-shafts (2) Low-Flexible type, Ideal for High Viscosity and Middle/Low Speed SL.iC023 ir-coupling, Low-flex, Φ10mm Chuck rod, for-φ10mm ir-shafts., 45g, Φ25 h30 30,500 SL.iC024 ir-coupling, Low-flex, Φ10mm Chuck rod, for-φ12mm ir-shafts., 45g, Φ25 h30 30,500 SL.iC025 ir-coupling, Low-flex, Φ12mm Chuck rod, for-φ12mm ir-shafts., 105g, Φ32 h38 40,660 SL.iC026 ir-coupling, Low-flex, Φ12mm Chuck rod, for-φ14mm ir-shafts., 105g, Φ32 h38 40,660 SL.iC027 ir-coupling, Low-flex, Φ12mm Chuck rod, for-φ16mm ir-shafts., 105g, Φ32 h38 40,660

irrer, Overhead / High-Torque Articles Cat. No Description DAIHAN-brand Remote Control Hi-Torque Digital Overhead irrer HT-T, for Middle-/High-Viscosity, Max.50-/80-/100-Lit with Push-Through Shaft(Φ10mm or Less) and Chuck grip 6~12mm, Flex-Coupling Φ6~16mm, 160,000 mpas, Max.1,000rpm 원격조절식디지털중 / 고점도용강력교반기, 사용교반봉 ; 1 기본은 Φ6~12mm, 2 관통은 Φ6~10mm, & 3 별도의 Flex-Coupling 활용시 Φ8~16mm Push-Through Shafts Φ10mm or Less S732 Impeller included ~1,000rpm irrer Unit (HT-120T) Clamp (CL200) Ensure Minimize RPM Fluctuation : Very able irring Speed(RPM) Performance with Certificate & Traceability : Controlled by Serial Number, Certificate, Delivery- information, and Traceable Data Base System 3.5:1 Ratio Worm-geared Motor Push-Through Shafts(Φ10mm or Less) ; Ideal for Raising or Lowering of the ir-shafts without Moving the Motor Head - Adjustable Height of Shaft Patented Jog-Shuttle Control System * Ideal for Middle-/High-Viscosity Included Remote-type Digital Feedback : - HT-50T, HT-120T model : Included irring-speed Remote - HT-140T model : Ideal for Reaction System. Included irring-speed Control and Temperature Display Remote for Reactor Module. (Can be Controlled irring Speed and Temperature Display of vessel) ainless-steel Chuck, Φ6~12mm Grip Remote Digital High-Torque Overhead irrer with irring Speed Remote HT-120T-Set irring Speed Control and Temp. Display Spec. Model HT-50T HT-120T HT-140T irring Capacity(H2O) Max. 50 Lit. Max. 80 Lit. Max. 100 Lit. Maximum Viscosity / Torque 100,000 mpas / 300 Ncm 150,000 mpas / 500 Ncm 160,000 mpas / 550 Ncm Speed Range & Motor 50 ~ 1,000 rpm 50 ~ 800 rpm Worm-Geared Motor(3.5:1 Ratio) Motor Rating (Input / Output) 83 / 75 W, 1/10 HP 130 / 120 W, 1/6 HP Timer & Alarm 99hr 59min (with Continuous run.), Timer-end Alarm Digital Feedback Remote / Digital LCD with Back-Light Function / Display irring Speed & irring Speed Remote Temp. Display Remote Max. Impeller Shaft Diameter Φ10 mm Permissible Temp. & Humidity 0 ~ 40, 80% Safety Device Overload & Heat Protector for motor Material ABS and Aluminum Dimension & Weight* 155 180 h110mm, 3.5 kg 155 230 h110mm, 4 kg Packing Size & 580 340 h230mm, Gross Weight 5 kg 580 340 h230mm, 8 kg Power Consumption 75 W 120 W and Package-set 230V DH.WOS01066 DH.WOS01076-120V DH.WOS02066 DH.WOS02076 - Price, Each. 667,000 782,000 - Unit & Remote 230V DH.WOS01065 DH.WOS01075 DH.WOS01085 120V DH.WOS02065 DH.WOS02075 DH.WOS02085 Price, Each. 547,000 608,000 661,000 * Weight of Remote = 2.5kg ** Other Specifications are available upon Customer s Request. * HT-50T Package-set : Complete with 1 HT-50T irrer Unit with Remote 2 S732 ainless-steel Impeller (Rod Φ8 L500mm, 4-Blade Φ70mm) 3 CL200 Clamp, and 4 ST120 Wide Plate and(rod Φ23 L1000mm, Base w30 d40cm) * HT-120T Package-set : Complete with 1 HT-120T irrer Unit with Remote 2 S736 ainless-steel Impeller (Rod Φ10 L650mm, 4-Blade Φ90mm) 3 CL200 Clamp, and 4 ST200 Deluxe Safety and (Rod Φ23 L1,200mm, Base 39 up to 75cm) Details of Wide-Range Couplings : See the irrer Accessories HT-140T Digital High-Torque Overhead irrer, (included irring Speed Remote and Temp. Display) with Modular Reactor System

irrers, Jar Tester(6-paddle irrers) Cat. No Description Articles DAIHAN-brand Digital Jar Tester JT-M6C, 6-Paddle irrer for Flocculation Test, 300 rpm, with Certi. & Traceability with Programmable Digital Feedback Control, 6 Impellers, 6 Independent Light Source, up to 6 1Lit. Beakers 프로그램 / 디지털자테스터, 정밀직류기어드모터와특화된타이밍벨트, 디지털피드백컨트롤 Digital Feedback Control System 300rpm with Certificate & Traceability : Controlled by Serial Number, Certificate, Delivery-information, and Traceable Data Base System Ideal for Flocculation Testing in Water Treatment Laboratories 6 Independent Light Source for Each irring Point * Deciding on Coagulant Chemistries * Digital Display for RPM, Power Bar-Graph and atus * Digital Feedback Control using Microprocessor : able and Accurate irring Speed * Geared DC Motor and Specially Designed Timing Belt used * able and Accurate irring Speed by Feedback Control * Digital LCD with Back-Light Function * Programmable Operation : 10 eps, 6 Programs Impellers(Φ8 L400mm) Jar Tester, Φ8 L400mm Shaft JT-M6C Geared DC Motor with Special Timing Belt Spec. Model JT-M6C 6 Paddler (ainless steel Shaft) irring Capacity Motor & Power Speed & Accuracy Timer Display Program Function Florescent Lamp Φ8 L400mm raight Blade w75 h25mm 6 1 Liter Beaker Geared DC Motor with Timing Belt (10:1 ratio), 40W 20~300 rpm, ±5 rpm 99hr 59min 59sec (Programmable) Digital LCD with Back-Light for RPM, Power Bar-Graph and atus Programmable Digital Feedback with Jog-Shuttle Switch (Turn + Push) 10 eps, 6 Programs, and orage for Set Values : RPM and Timer 20W 6 (Independent Light Source for Each Sample) Dimension (w d h) (mm) 1,000 310 535 Safety Device Others Packing and Gross Weight Price, Each. Overload & Over Heat Protector for motor CE Certified, PL(Product Liability) Insurance and orage Function (RPM, Timer) 1,120 430 h740mm, 69 kg 230V DH.WJT06020 1,870,000 120V DH.WJT06021 1,875,000 운임약 18,000 별도! irrers, Accessories SciLab DURAN glass irring Rods, with Round Ends, Φ7 ~ Φ10, L200 ~ 650mm Borosilicate Glassα3.3, 글라스핸디교반봉, 끝부분이둥근모양, 긁힘방지 Made of DURAN Glass Rod : by SciLab Korea. * Rounded Ends for Extra Safety * Non-Scratching (1) L200~350mm Length SL.iS201 Glass Rod, Φ7, L200mm 3,600 SL.iS202 Glass Rod, Φ7, L250mm 3,650 SL.iS203 Glass Rod, Φ7, L300mm 3,720 SL.iS204 Glass Rod, Φ8, L300mm 3,850 SL.iS205 Glass Rod, Φ8, L350mm 3,930 (2) L400~650mm Length SL.iS206 Glass Rod, Φ8, L400mm 4,000 SL.iS207 Glass Rod, Φ8, L500mm 4,120 SL.iS208 Glass Rod, Φ10, L450mm 5,120 SL.iS209 Glass Rod, Φ10, L500mm 5,290 SL.iS210 Glass Rod, Φ10, L650mm 6,050 SciLab DURAN glass Double-ended irring Rods, Φ6 ~ Φ10mm, L200 ~ L500mm Useful for Crushing Clumped Powder and Solids, Borosilicate Glassα3.3 Made of DURAN Borosilicate Glass 3.3 Rod : by SciLab Korea. * With Rounded Button and Paddle Ends for Extra Safety and to Minimize Scratching * Button End is Useful for Crushing Clumped Powder and Solids Glass Double-ended irring Rods (1) L200~300mm Length SL.iS211 2-end Rod, Φ6, L200mm 7,820 SL.iS212 2-end Rod, Φ6, L250mm 7,910 SL.iS213 2-end Rod, Φ6, L300mm 7,950 SL.iS214 2-end Rod, Φ9, L300mm 8,370 (2) L350~500mm Length SL.iS215 2-end Rod, Φ09, L350mm 8,460 SL.iS216 2-end Rod, Φ09, L400mm 8,560 SL.iS217 2-end Rod, Φ10, L450mm 9,480 SL.iS218 2-end Rod, Φ10, L500mm 9,650

irrers, Accessories Articles Cat. No Description Chuck-Rod Exchangeable (1) Hi-flex Metal for Φ6 ~ 16 Shafts ir-motor Chuck Flexible- Coupling ir-shafts (2) Heavy-duty Metal for Φ10 ~ 16 Shafts Flexible Couplings, for Safety irring of Φ6~16mm Shafts of Overhead irrers for irrers between irring Motor and Shaft, 안전교반용유연성커플링 Used to Compensate Any Vibrations Between The Motor and irring Shafts * Made in Korea * Shaft Fastening by Screw Clamp Band * Made of DURALUMIN * with Exchangeable STS Chucking Rod Φ8 / 10 / 12mm, L40mm (1) UTILITY High-Flex. Metal Coupling, with 2 Flex-band, for Φ6~16mm ir-shafts (1) Ideal for Low/High Viscosity and High/Low Speed SL.iC011 ir-coupling, Hi-flex, Φ8mm Chuck-rod, for-φ6mm ir-shaft, 56g, Φ25 h44mm 60,500 SL.iC012 ir-coupling, Hi-flex, Φ8mm Chuck-rod, for-φ8mm ir-shaft, 53g, Φ25 h44mm 60,500 SL.iC013 ir-coupling, Hi-flex, Φ8mm Chuck-rod, for-φ10mm ir-shaft, 49g, Φ25 h44mm 60,500 SL.iC014 ir-coupling, Hi-flex, Φ10mm Chuck-rod, for-φ8mm ir-shaft, 49g, Φ25 h44mm 60,500 SL.iC015 ir-coupling, Hi-flex, Φ10mm Chuck-rod, for-φ10mm ir-shaft, 43g, Φ25 h44mm 60,500 SL.iC016 ir-coupling, Hi-flex, Φ10mm Chuck-rod, for-φ12mm ir-shaft, 33g, Φ25 h44mm 60,500 SL.iC017 ir-coupling, Hi-flex, Φ12mm Chuck-rod, for-φ10mm ir-shaft, 33g, Φ25 h44mm 60,500 SL.iC018 ir-coupling, Hi-flex, Φ12mm Chuck-rod, for-φ12mm ir-shaft, 123g, Φ32 h60mm 72,600 SL.iC019 ir-coupling, Hi-flex, Φ12mm Chuck-rod, for-φ14mm ir-shaft, 120g, Φ32 h60mm 72,600 SL.iC020 ir-coupling, Hi-flex, Φ12mm Chuck-rod, for-φ16mm ir-shaft, 118g, Φ32 h60mm 72,600 (2) Heavy-duty Metal Coupling, with Short Flex-band, for Φ10~16mm ir-shafts (2) Low-Flexible type, Ideal for High Viscosity and Middle/Low Speed SL.iC023 ir-coupling, Low-flex, Φ10mm Chuck rod, for-φ10mm ir-shafts., 45g, Φ25 h30 30,500 SL.iC024 ir-coupling, Low-flex, Φ10mm Chuck rod, for-φ12mm ir-shafts., 45g, Φ25 h30 30,500 SL.iC025 ir-coupling, Low-flex, Φ12mm Chuck rod, for-φ12mm ir-shafts., 105g, Φ32 h38 40,660 SL.iC026 ir-coupling, Low-flex, Φ12mm Chuck rod, for-φ14mm ir-shafts., 105g, Φ32 h38 40,660 SL.iC027 ir-coupling, Low-flex, Φ12mm Chuck rod, for-φ16mm ir-shafts., 105g, Φ32 h38 40,660 (3) Very Flexible Rubber Based Coupling, for Φ7~10mm Shafts (3) Especially, Ideal for GLASS Shafts and Low/Middle Viscosity & High Speed (3) Rubber Based for Φ7 ~ 10 Shafts * Made in Germany * Shaft Fastening by Screw Compression Rubber Ring Pad. * with Φ10 L40mm Exchangeable ainless-steel Chucking Rod WI.1445000 ir-coupling, Rubber Based, for Φ7 ~ Φ10mm Shafts, 72.5g, Body Φ46 h80mm 191,490 SciLab ainless-steel irring Shafts, for Lab & Industrial Overhead irrers, Rod Φ8~12 L500~1000mm Ideal for Universal-use of Wide-range Speed & Viscosity, 스텐레스교반봉 / 임펠러 Made in Korea Made of Rustless ainless-steel #304 Recommended to use with Flexible Coupling for Gentle irring & Safety Working The Rod may be Cut to Any Length with a Hacksaw Good Finished : Surface & irring Center (1) 3-bladed Propeller-type (2) Universal-use (2) 4-bladed Propeller-type (3) andard-model (1) 3-bladed Propeller-type, ideal for Universal-use in Middle/High Speed (2) with Rod Φ8~12 L500~1000, Rotor Φ50~140 mm, and Good for Low/Middle Viscosity * Designed for Efficient Flow : mixed from Top to Bottom of Vessel * Minimum Shearing SL.iS721 ir-shaft, S721, #304, Rod-Φ8 L500, Rotor-Φ50 h15mm 13,560 SL.iS722 ir-shaft, S722, #304, Rod-Φ8 L500, Rotor-Φ60 h15mm 13,560 SL.iS723 ir-shaft, S723, #304, Rod-Φ8 L650, Rotor-Φ80 h20mm 14,520 SL.iS724 ir-shaft, S724, #304, Rod-Φ8 L650, Rotor-Φ100 h24mm 14,520 SL.iS726 ir-shaft, S726, #304, Rod-Φ10 L500, Rotor-Φ60 h15mm 14,520 SL.iS727 ir-shaft, S727, #304, Rod-Φ10 L650, Rotor-Φ80 h20mm 15,490 SL.iS728 ir-shaft, S728, #304, Rod-Φ10 L800, Rotor-Φ100 h24mm 16,850 SL.iS729 ir-shaft, S729, #304, Rod-Φ12 L1000, Rotor-Φ140 h30mm 21,300 (2) andard 4-bladed Propeller-type, ideal for Low/Middle Speed & Viscosity (3) Popular-model, with Rod Φ8~12 L500~1000, Rotor Φ50~140 mm, 45 Angled SL.iS731 ir-shaft, S731, #304, Rod-Φ8 L500, Rotor-Φ50 h20mm 13,560 SL.iS732 ir-shaft, S732, #304, Rod-Φ8 L500, Rotor-Φ70 h25mm 13,560 SL.iS733 ir-shaft, S733, #304, Rod-Φ8 L650, Rotor-Φ90 h35mm 14,520 SL.iS734 ir-shaft, S734, #304, Rod-Φ8 L650, Rotor-Φ110 h35mm 14,520 SL.iS736 ir-shaft, S736, #304, Rod-Φ10 L650, Rotor-Φ90 h35mm 15,490 SL.iS737 ir-shaft, S737, #304, Rod-Φ10 L800, Rotor-Φ110 h40mm 15,880 SL.iS738 ir-shaft, S738, #304, Rod-Φ10 L1000, Rotor-Φ110 h40mm 18,590 SL.iS739 ir-shaft, S739, #304, Rod-Φ12 L1000, Rotor-Φ140 h40mm 21,300 <Continued On Next Page>

irrers, Accessories Cat. No Description Articles <Continued From...SciLab ainless-steel irring Shafts> (3) 4-bladed Dissolver Diamond-type (4) Heavy-duty Anchor-type NEW (5) Heavy-duty Helical Ribbon-type (3) 4-bladed Dissolver Diamond-type, Good for Particle Reduction in Middle/High Speed with Rod Φ8 & 10 L500~650, Rotor Φ70~110 mm, and Good for Low/Middle Viscosity SL.iS741 ir-shaft, S741, #304, Rod-Φ8 L500, Rotor-Φ70 h20mm 13,560 SL.iS742 ir-shaft, S742, #304, Rod-Φ8 L500, Rotor-Φ90 h25mm 13,560 SL.iS743 ir-shaft, S743, #304, Rod-Φ8 L650, Rotor-Φ110 h25mm 14,520 SL.iS744 ir-shaft, S744, #304, Rod-Φ10 L650, Rotor-Φ110 h25mm 15,490 (4) Heavy-duty Anchor-type, ideal for Middle/High Viscosity, Rod Φ8~12mm Good for Low/Middle Speed, Rotor Φ70~180 mm SL.iS751 ir-shaft, S751, #304, Rod-Φ8 L500, Rotor-Φ70 h14mm 12,420 SL.iS752 ir-shaft, S752, #304, Rod-Φ8 L650, Rotor-Φ90 h16mm 13,510 SL.iS753 ir-shaft, S753, #304, Rod-Φ10 L650, Rotor-Φ90 h16mm 14,380 SL.iS754 ir-shaft, S754, #304, Rod-Φ10 L800, Rotor-Φ140 h25mm 16,340 SL.iS755 ir-shaft, S755, #304, Rod-Φ10 L1000, Rotor-Φ160 h30mm 19,610 SL.iS757 ir-shaft, S757, #304, Rod-Φ12 L1000, Rotor-Φ180 h30mm 23,960 (5) Heavy-duty Helical Ribbon-type, ideal for Middle/High Viscosity and Lab~Industry with Rod Φ8~12mm, L500~1000, Rotor Φ60~190mm, Good for Reaction-system. * Patented Helical Ribbon High Efficient Mixing Performance * Generates Axial Flow. * Designed for Middle / High Viscosity. High Flow Rate and Efficient Mixing. * For Homogeneous Mixing and Medium is Conveyed from the Bottom upwards. NEW SL.i761 ir-shaft, S761, #304, Rod-Φ8 L500, Rotor-Φ60 h70mm 38,800 SL.i762 ir-shaft, S762, #304, Rod-Φ8 L650, Rotor-Φ80 h90mm 50,900 SL.i763 ir-shaft, S763, #304, Rod-Φ10 L650, Rotor-Φ115 h130mm 59,300 SL.i764 ir-shaft, S764, #304, Rod-Φ10 L800, Rotor-Φ125 h165mm 69,000 SL.i765 ir-shaft, S765, #304, Rod-Φ10 L1000, Rotor-Φ160 h215mm 75,100 SL.i766 ir-shaft, S766, #304, Rod-Φ12 L1100, Rotor-Φ190 h400mm 84,500 SciLab PTFE irring Shafts, with ainless-steel Insert, for Lab & Industrial Overhead irrers, Rod Φ8~14 L500~1100mm Ideal for PURE Working & Universal-use of Wide-range Speed & Viscosity, Chemically Inert, -200 +280 -stable, PTFE 교반봉 / 임펠러 Made in Korea Recommended to Use with a Flexible Coupling for Gentle irring & Safety Working. The PTFE Rod with ainless eel Insert : (1) OD Φ8mm with Φ6mm eel Insert- Φ8/6, (2) OD Φ10mm with Φ8mm eel Insert- Φ10/8, (3) OD Φ12mm with Φ10mm eel Insert- Φ12/10, and OD Φ14mm with Φ12mm eel Insert- Φ14/12. Rod may be Cut to Any Length with a Hacksaw. Ideal for PURE-Working / Chemically Inert / Non-Contaminating /Thermally able, -200 +280 -stable. Exposed Top Rod 4~5cm (ainless steel Core) : For rong Clamping in the ir-chuck or Flexible Coupling. (1) 2-bladed Centrifugal-type (1) Good for Narrow-Neck (1) <ex> 24/- & 34/-Joint neck (2) andard 4-bladed (2) Propeller-type Exposed Top (1) 2-bladed Centrifugal-type, ideal for 24/- & 34/-Joints(Narrow) Necks & Low Viscosity with Rod Φ8 & 10 L500~650, Rotor Φ50~100 mm, and Good for Middle/High Speed PTFE/STS -Rod SL.iS403 ir-shaft, PTFE, Rod-Φ8/6 L500, Swingrotor-Φ50 h14mm, fit to 24/-joints 38,720 SL.iS404 ir-shaft, PTFE, Rod-Φ8/6 L500, Swingrotor-Φ70 h17mm, fit to 24/-joints 41,300 SL.iS405 ir-shaft, PTFE, Rod-Φ8/6 L650, Swingrotor-Φ100 h24mm, fit to 34/-joints 45,600 SL.iS406 ir-shaft, PTFE, Rod-Φ10/8 L650, Swingrotor-Φ100 h24mm, fit to 34/-joints 48,900 (2) andard 4-bladed Propeller-type, ideal for Low/Middle Speed and High Viscosity Good for Reactors, with Rod Φ8~14 L500~1100 and Rotor Φ50~140 mm, 45 Angled * andard irring Shafts. * Designed for Efficient Mixing : from Top to Bottom of Vessel SL.iS410 ir-shaft, PTFE, Rod-Φ8/6 L500, Rotor-Φ50 h20mm 61,960 SL.iS411 ir-shaft, PTFE, Rod-Φ8/6 L500, Rotor-Φ70 h25mm 73,180 SL.iS412 ir-shaft, PTFE, Rod-Φ8/6 L650, Rotor-Φ70 h25mm 75,200 SL.iS413 ir-shaft, PTFE, Rod-Φ10/8 L650, Rotor-Φ90 h35mm, Good for 5~10 Lit Vessels 88,070 SL.iS414 ir-shaft, PTFE, Rod-Φ10/8 L800, Rotor-Φ90 h35mm, Good for 10~20 Lit Vessels 92,200 SL.iS415 ir-shaft, PTFE, Rod-Φ10/8 L1000, Rotor-Φ90 h35mm, Good for 20~50 Lit Vessels 97,600 SL.iS416.1 ir-shaft, PTFE, Rod-Φ12/10 L800, Rotor-Φ110 h40mm, Good for 10~20 Lit Vessels 140,500 SL.iS416.2 ir-shaft, PTFE, Rod-Φ12/10 L1000, Rotor-Φ110 h40mm, Good for 30~50Lit Vessels 160,800 SL.iS416.3 ir-shaft, PTFE, Rod-Φ12/10 L1000, Rotor-Φ140 h40mm, Good for 30~80Lit Vessels New 303,500 SL.iS417 ir-shaft, PTFE, Rod-Φ14/12 L1100, Exchangeable Rotor-Φ140 h40mm, 323,700 Good for 50~100Lit Reactors <Continued On Next Page>

irrers, Accessories Articles Cat. No Description <Continued From...SciLab PTFE irring Shafts> (3) with 2-Rotors, Propeller-type (4) Heavy-duty Anchor-type (3) with 2-Exchangeable Rotors of 4-bladed Propeller-type, for 20~100Lit Reaction Vessels Ideal for High Viscosity/ Large Volume irring, with Rod Φ12 & 14 L 800~1100 mm * Translucent PFA Shaft with ainless-steel Insert, Totally Chemical Inert SL.iS416.4 ir-shaft, PTFE, for 20~30Lit, Rod-Φ12/10 L800, 2-Rotors of (1) Exchangeable New 355,000 1st Rotor Φ110 h40 and (2) Bottom Rotor Φ110 h40mm SL.iS418 ir-shaft, PTFE, for 30~80Lit, Rod-Φ12/10 L1000, 2-Rotors of (1) Exchangeable 375,500 1st Rotor Φ110 h40 and (2) Bottom Rotor Φ140 h40mm SL.iS419 ir-shaft, PTFE, for50~100lit, Rod-Φ14/12 L1100, 2-Rotors of (1) Exchangeable 529,600 1st Rotor Φ140 h40 and (2) Bottom Rotor Φ140 h40mm (4) Heavy-duty Anchor-type, ideal for Middle/High Viscosity, Rod Φ8~12mm Good for Low/Middle Speed, Rotor Φ80~140 mm Made in UK. CW.005.340.82 Shaft, Φ8 L400mm Rod, Φ80mm Anchor 59,290 CW.005.350.82 Shaft, Φ8 L500mm Rod, Φ80mm Anchor 60,060 CW.005.355.2 Shaft, Φ10 L550mm Rod, Φ100mm Anchor 61,970 CW.005.0365.102 Shaft, Ex-type, Φ10 L650mm Rod, Φ140mm Anchor 78,590 CW.005.0375.102 Shaft, Ex-type, Φ10 L750mm Rod, Φ140mm Anchor 79,420 CW.005.0375.122 Shaft, Ex-type, Φ12 L750mm Rod, Φ140mm Anchor 109,380 CW.005.03100.122 Shaft, Ex-type, Φ12 L1000mm Rod, Φ140mm Anchor 119,650 (1) Glass-shafts (2) PTFE-shafts 1 2 (3) PTFE Blade, with Φ6.5 Connect-hole GLASS and PTFE/eel Cored Shafts and PTFE Blades, Exchangeable Ideal for 24/- & 34/-Joint (Narrow) Necks, 교체형글라스 & PTFE 교반봉과임펠러 * Glass Shafts : DURAN Borosilicate Glass 3.3 Rod Φ8 & 10mm : Made in Korea * PTFE Encapsulated ainless-steel Shafts Φ8 & 12mm, -200 +280 able : Made in U.K. (1) GLASS-Shafts, Φ8/10, L400~600mm SL.iS260 Glass-Shaft, Φ8, L400mm 22,750 SL.iS261 Glass-Shaft, Φ8, L500mm 22,870 SL.iS262 Glass-Shaft, Φ8, L600mm 22,990 SL.iS265 Glass-Shaft, Φ10, L400mm 22,990 SL.iS266 Glass-Shaft, Φ10, L500mm 23,490 SL.iS267 Glass-Shaft, Φ10, L600mm 23,680 (2) Cowie PTFE/eel Cored Shafts, Φ8 & 12mm, L400~750mm, without Blade * The Rod may by Cut to Any Length with a Hacksaw CW.005.540.81 Shaft, PTFE, Φ8 L400mm 41,910 CW.005.550.81 Shaft, PTFE, Φ8 L500mm 42,730 CW.005.555.1 Shaft, PTFE, Φ10 L550mm 41,680 CW.005.565.1 Shaft, PTFE, Φ10 L650mm 42,540 CW.005.0575.101 Shaft, PTFE, Φ10 L750mm 54,350 CW.005.0575.121 Shaft, PTFE, Φ12 L750mm 87,720 (3) Cowie PTFE ir-blades, Thick-3.2mm, Ideal for 24/- & 34/-Joint Necks 1 with Square End, Fit to 24/-Joints CW.002.052.1 Blade, Squ. 52 h14mm 2,690 CW.002.076.1 Blade, Squ. 76 h19mm 3,490 CW.002.090.1 Blade, Squ. 90 h28mm 4,740 2 with Plain End, Fit to 34/-Joints CW.002.1065.1 Blade, Pla. 65 h25mm 3,680 CW.002.1075.1 Blade, Pla. 75 h25mm 3,900 CW.002.1105.1 Blade, Pla. 105 h25mm 4,450 CW.002.1125.1 Blade, Pla. 125 h25mm 4,600 CW.002.1150.1 Blade, Pla. 150 h25mm 5,110 (1) Glass (2) PFA Glass & PFA (ainless-steel Insert) PLAIN Shafts, for Exchangeable Rotors for Exchangeable Rotors, 글라스및스텐심 PFA 교반봉 Made in Korea (1) DURAN Glass Shaft, Round Ends, Boro. Glass 3.3, Φ8 & 10, L400~650mm * Good for Eco-Pure Work SL.iS206 Glass Shaft, Φ8 L400mm 4,000 SL.iS207 Glass Shaft, Φ8 L500mm 4,120 (2) PFA with ainless-steel Insert Shafts, Φ8~14 L500~1100mm SL.iS208 Glass Shaft, Φ10 L450mm 5,120 SL.iS209 Glass Shaft, Φ10 L550mm 5,290 SL.iS210 Glass Shaft, Φ10 L650mm 6,050 * The Rod may by Cut to Any Length with a Hacksaw * Translucent PFA, Totally Chemical Inert, -200 +260 SL.iS451 Shaft, PFA, Φ8/6 L500mm 53,600 SL.iS452 Shaft, PFA, Φ8/6 L650mm 55,800 SL.iS453 Shaft, PFA, Φ8/6 L800mm 57,400 SL.iS454 Shaft, PFA, Φ10/8 L650mm 65,600 SL.iS455 Shaft, PFA, Φ10/8 L800mm 67,400 SL.iS456 Shaft, PFA, Φ12/10 L800mm 77,800 SL.iS457 Shaft, PFA, Φ12/10 L1000mm 80,600 SL.iS458 Shaft, PFA, Φ14/12 L1100mm 120,000

irrers, Accessories Cat. No Description Articles All PTFE Adjustable / Exchangeable Rotors, for Shaft Φ8~16mm for Shaft Φ8~16mm, PTFE 교체형 / 조절식교반임펠러 (1) Screw Propeller only Φ50 ~ Φ140mm (2) Turbine Rotor Only Φ50 ~ Φ150mm The Exchangeable Rotors fit to Φ8~16mm Rods and Lock in place with Screw Nut (1) SciLab Exchangeable Screw Propeller Rotor, 45 Angled 4 Blade * Made in Korea SL.iS461 Rotor, PTFE, for Shaft-Φ8, Rotor-Φ50 h20mm 54,100 SL.iS462 Rotor, PTFE, for Shaft-Φ8, Rotor-Φ70 h25mm 56,300 SL.iS463 Rotor, PTFE, for Shaft-Φ10, Rotor-Φ70 h25mm 56,300 SL.iS464 Rotor, PTFE, for Shaft-Φ10, Rotor-Φ90 h35mm 88,400 SL.iS465 Rotor, PTFE, for Shaft-Φ12, Rotor-Φ110 h40mm 90,700 SL.iS466 Rotor, PTFE, for Shaft-Φ14, Rotor-Φ140 h40mm 130,900 (2) Cowie Exchangeable Turbine Rotor only,φ50~150mm * Made in UK. CW.005.90850 PTFE Turbine, for Shaft-Φ8mm, Rotor-Φ50mm 61,110 CW.005.90875 PTFE Turbine, for Shaft-Φ8mm, Rotor-Φ75mm 77,540 CW.005.91075 PTFE Turbine, for Shaft-Φ10mm, Rotor-Φ75mm 80,000 CW.005.910100 PTFE Turbine, for Shaft-Φ10mm, Rotor-Φ100mm 102,810 CW.005.912100 PTFE Turbine, for Shaft-Φ12mm, Rotor-Φ100mm 108,360 CW.005.916150 PTFE Turbine, for Shaft-Φ16mm, Rotor-Φ150mm 180,440 Ea. Price, (1) (2) (3) (4) Kartell PP & PVC Plastic irring Shafts, PP-Blade, PVC-Rod with eel Core, Rod Φ8 L350mm Good for Acid & Chemicals resistance, PP & PVC 플라스틱교반봉 / 임펠러 Supplied by Kartell in Italy Ideal for Acids, Chemicals and Anti-corrosion Material : PP-Blade, PVC-Rod with eel Core: Φ8 L350 mm KA.428 (1) irring Paddle, with 2 fixed blade (w39 h15 mm), Rod Φ8 L350mm 21,980 KA.430 (2) irring Paddle, U shaped blade (w65 h78 mm), Rod Φ8 L350mm 21,980 KA.431 (3) irring Paddle, with 2 flexible paddle (Swing w57 mm), Rod Φ8 L350mm 25,080 KA.432 (4) irring Paddle, with 2 flexible paddle (Swing w98 mm), Rod Φ8 L350mm 25,080 (1) ST110 (2) ST120 DAIHAN-brand Premium Plate and, High Quality with ainless-steel Rod Φ16/23mm Made in Korea High-Quality Plate-type and with Support Rod Wide and Thick eel Plate for Safety Mechanism Silicon Rubber Pad adhered with 1.5P Screwed Support Rod made of ainless-steel specially designed DH.WOS501510 (1) ST 110 andard eel Plate and, Powder Coated, 78,000 with Base Plate/Silico ne Pad, for irrer and Homogenizer, Base Plate w20 35cm RD 511 1.5P Screw Rod, Φ16 h800 mm DH.WOS501515 (2) ST 120 Wide eel Plate and, Powder Coated, 94,000 with Base Plate/Silicone Pad, for irrer and Homogenizer, Base Plate w30 40 cm RD 522 1.5P Screw Rod, Φ23 h1000 mm DAIHAN-brand Heavy Duty Safety and, High Safety with ainless-steel Rod Φ23mm 90 o (1) ST200 370mm 280mm 90 o (2) KA1177 210mm 290mm Made in Korea Never Fall Down by Safety Mechanism. High-Safety H-/U-type and with ainless-steel Support Rod Adjustable Foot Distance (ST200) (1) Adjustable Foot Distance Deluxe Safety and DH.WOS501520 Deluxe Safety and, ST 200, 141,000 H-type Base w39~75cm adjust, RodΦ23 h1200mm (2) U-type Safety and DH.WOS1177 Safety and, KA1177, 66,000 U-type Base w34/29 27/21cm, RodΦ23 h800mm

irrers, Accessories Articles Cat. No Description Clamp CL200 eel Retort Base Duo and r SciLab-brand Universal Jumbo Clamp Holder, for and/rod Made in Korea * Cast-Aluminium * Ideal for Reactor Flame SL.Cla8011 Clamp Holder, CL 200, Cast Aluminum, Grip Capacity, Φ23mm for and/rod 15,000 eel Retort Base Duo and, for 2 Plain Rods of up to Φ16mm, without Rods with Hinged Set Screw M6, Nonskid Feet equipped, 2 Level Screw Nut, and Base Thick-8mm Made in Germany * Can Fix Rods up to 2ea (Below Φ16mm) Retort and Base only US.2040 and Base only, US2040, r =150mm 62,860 US.2041 and Base only, US2041, r =185mm 85,720 Optional ainless-steel Rod of Φ16mm, without Screw DH.WOS502001 ainless-steel Rod, RD501, Φ16 h800mm, non-screw 19,000 DH.WOS502002 ainless-steel Rod, RD502, Φ16 h1000mm, non-screw 22,000 DH.WOS502003 ainless-steel Rod, RD503, Φ16 h1200mm, non-screw 22,000 DAIHAN-brand Φ16 & 23mm High-Quality ainless-steel (#304) Rods, for and Bases (2) 1.5P Screw (1) none screw ainless-steel Rods With or Without 1.5P Screw (1) Plain-type Φ16mm Rod, without Screw DH.WOS502001 ainless-steel Rod, RD501, Φ16 h800mm, non-screw 19,000 DH.WOS502002 ainless-steel Rod, RD502, Φ16 h1000mm, non-screw 22,000 DH.WOS502003 ainless-steel Rod, RD503, Φ16 h1200mm, non-screw 22,000 DH.WOS502031 ainless-steel Rod, RD531, Φ23 h800mm, non-screw 32,000 DH.WOS502033 ainless-steel Rod, RD533, Φ23 h1200mm, non-screw 28,000 (2) 1.5P Screw-type Φ16 & 23mm Rod DH.WOS502011 ainless-steel Rod, RD511, Φ16 h800mm, 1.5P Screw 25,000 DH.WOS502012 ainless-steel Rod, RD512, Φ16 h1000mm, 1.5P Screw 25,000 DH.WOS502013 ainless-steel Rod, RD513, Φ16 h1200mm, 1.5P Screw 25,000 DH.WOS502021 ainless-steel Rod, RD521, Φ23 h800mm, 1.5P Screw 26,000 DH.WOS502022 ainless-steel Rod, RD522, Φ23 h1000mm, 1.5P Screw 26,000 DH.WOS502023 ainless-steel Rod, RD523, Φ23 h1200mm, 1.5P Screw 26,000