PRIME -BURNER PROPANE RBECUE Assembly Manual 85-15-0 / G2012 1 YEAR LIMITED WARRANTY READ AND SAVE MANUAL FOR FUTURE REFERENCE. Assemble your grill immediately. Missing or damaged parts claims must be submitted within 0 days of purchase date. For product inquiries, parts, warranty and troubleshooting support, please call 1-855-45-2150. ANSI Z21.58-2015 / CSA 1.6-2015 ANSI Z21.58-2015 / CSA 1.6-2015 Manual Revision #: 02212019 JC
H E A V Y ARTICLE NEEDS 2 TO LIFT THIS MANUAL MUST REMAIN WITH THE PRODUCT AT ALL TIMES To ORDER non-warranty replacement parts or accessories, or to register your warranty, please visit us on the web at www.masterchefbbqs.com CAUTION Sharp edges. Wear gloves when assembling your grill. CAUTION Read and follow all safety statements, assembly instructions, use and care directions before attempting to assemble and cook. INSTALLER OR ASSEMBLER/CONSUMER This manual should be kept with the BBQ at all times. WARNING Failure to follow all of the Manufacturer s instructions could result in hazardous fires, explosions, property damage, serious personal injury or even death. Follow all leak check procedures carefully prior to operation of barbecue, even if grill was dealer assembled. Do not try to light this barbecue without reading the Lighting Instructions section of this manual. DANGER 1. If you smell Gas: a. Shut off gas to the appliance. b. Extinguish any open flame. c. Open lid. d. If odor continues, keep away from the appliance and immediately call your gas supplier or your fire department. 2. Requires two people to complete the assembly process.. Beware of sharp edges. WARNING 1. Do not store or use gasoline or other flammable liquids or vapours in the vicinity of this or any other appliance. 2. An LP cylinder not connected for use shall not be stored in the vicinity of this or any other appliance. WARNING IN DIRECT SUNLIGHT, AND IN OPERATION, YOUR BBQ S STAINLESS STEEL AND PAINTED STEEL PARTS CAN BECOME VERY HOT. THIS RBECUE IS FOR OUTDOOR USE ONLY. CONTACT CALL CENTRE IF ANY PARTS ARE MISSING. 1-855-45-2150
HARDWARE PACK TOOLS NEEDED FOR ASSEMBLY #2 Star-head screwdriver (long and short) ¼ Slotted screwdriver (long and short) Adjustable wrench Pliers For correct hardware assembly, always position the lock washer between the screw and the flat washer. Screw Lock Washer Flat Washer KEY # DESCRIPTION PART NUMBER QUANTITY 1 1/4-20 UNC x 50 Screw 20120-1050-06 2 2 1/4-20 UNC x 0 Screw 20120-100-06 2 1/4-20 UNC x 20 Screw 20120-1020-06 16 4 No.10-24 UNC x 1 Screw 20124-1001-06 0 5 No. 8-2 UNC x 10 Screw 2012-08010-250 6 6 ST4.2 x 8 Tapping Screw 24200-42008-16 5 7 1/4-20 UNC Nut 1220-1000-06 10 8 No.10-24 UNC Nut 1224-10000-06 1 9 Aluminum Washer G466-0042-9000 17 10 Hitch Pin, Burner G515-001-9000 11 Wheel Spacer G12-0014-9088 2 12 Hitch Pin, Wheel G06-0005-9088 1 1 Wheel Washer 4000-08000-06 1 14 Stopper, Lid Hinge G20-004-9191 2 15 Top Lid Spacer G05-0024-9088 2 16 Clip, Regulator G51-004-9000 1 Caution: Sheet metal can cause injury. Wear gloves when installing the grill. 1 2 4 1/4-20 UNC x 50 Screw X 2 5 1/4-20 UNC x 0 Screw X 2 6 1/4-20 UNC x 20 Screw 6 7 No. 10-24 UNC x 1 Screw X 0 8 No. 8-2 UNC x 10 Screw X 6 9 ST4.2 x 8 Tapping Screw X 5 1/4-20 UNC Nut 0 No. 10-24 UNC Nut Aluminum Washer 7 10 11 12 Hitch Pin, Burner X Wheel Spacer X 2 Hitch Pin, Wheel 1 14 15 Wheel Washer Stopper, Lid Hinge X 2 Top Lid Spacer X 2 16 Clip, Regulator BEFORE ASSEMBLING THIS RBECUE, READ THE INSTRUCTIONS CAREFULLY. Assemble the barbecue on a flat, clean surface. The grill is heavy, two people are recommended to complete assembly.
PARTS LIST (PROPANE) FOR 85-15-0 / G2012 KEY # QUANTITY DESCRIPTION PART NO. AA 1 Top Lid Assembly G20-6501-01 AB 1 Top Lid Handle G20-601-01 AC 1 Lid Handle Heat Shield G20-5104-01 AD 2 Lid Hinge G20-5101-01 AE 2 Lid Handle Washer G560-0002-01 AF 2 Lid Handle Screw and Washer G42-U00-01 1 Burner Box Assembly G20-5400-01 BB Main Burner G20-0200-01 BC 1 Electrode Set, Main Burner G12-B10-01 BD 2 Carryover Assembly G41-0004-02 BE Flame Tamer G215-020-01 BF 1 Cooking Grate G05-0006-01 BG 1 Warming Rack G20-6401-01 CA 1 Control Panel G20-6000-01 CB 1 Manifold Assembly G20-6100-01 CC 1 Regulator G11-050-01 CD Control Knob G20-502-01 CE 1 Ignitor G206-0701-01 CF 1 Grease Cup Hook G05-004-01 CG 1 Grease Cup G40-00-02 CH 1 Gas Tank Heat Shield G20-00-01 DA 1 Top Cart Leg, Left G20-5601-01 DB 1 Front Cart Leg, Left ------------2 G20-5602-01 DC 1 Rear Cart Leg, Left -------------1 G20-560-01 DD 1 Top Cart Leg, Right G20-5701-01 DE 1 Front Cart Leg, Right ---------- 4 G20-5702-02 DF 1 Rear Cart Leg, Right ----------- G20-570-02 DG 2 Lower Cart Brace G12-B50-01 DH 1 Upper Back Brace G20-5800-01 DI 1 Lower Back Brace G20-5900-02 DJ 1 Front Panel G20-5501-01 DK 2 End Caps G20-5504-01 DL 2 Wheel G206-0025-01 DM 1 Wheel Axle G20-5507-01 DN 1 Match Holder G401-0079-01 DO 1 Tank Exclusion Wire G20-6601-01 DP 1 Gas Tank Support G20-550-01 DQ 1 Tank Exclusion Wire, Right G215-80-01 EA 2 Side Shelf G215-1800-01 F1 1 Hardware Pack G20-B008-01 F2 1 Assembly Instructions G20-M012-01 F 1 Safe Use and Care Manual G20-M012-02 4
EXPLODED DIAGRAM (PROPANE) FOR 85-15-0 / G2012 AA BG AC BF AD AF BD CB AE AB CC BE EA BB CD BC EA CE DN CA CH CF CG DP DO DH DD DA DQ DM 1 DI 4 DL 1 2 DF () 4 DG DG DC (1) 2 DB (2) DJ DE (4) DK F1 HARDWARE PACK F2 ASSEMBLY MANUAL F SAFETY AND CARE MANUAL 5
1 62 7 DA (1) DC (1) DA (2) DB (2) DG 61 7 4 DG X 2 DC (1) DB (2) 6
2 62 7 DD () DF () DD (4) DQ DE (4) DG 61 7 DF () DE (4) DG 4 X 2 7
DA DD DQ DJ 4 X 6 8
4 DD DA DH 4 X 8 DD DA DH DQ DI 9
5 DK 11 6 DM DL 11 11 DL 1 12 11 6 12 7 1 12 1 11 10
6 DJ DO DQ DI 6 11
7 A B 4 79 X 4 X 4 12
8 A BB 10 BB BC BB 10 10 Assemble burner with electrode in the middle. X B BB BD BD 6 X 1
9 YOU A WILL NEED: 4 X 2 CH B CH 8 8 4 4 78 79 9 14
10 A CE CE CA 15
10 B 5 X 6 CA CB CA CB 16
11 A ATTENTION: YOU WILL NEED TWO PEOPLE FOR THIS STEP. CE Attach the main burner electrode wire (BC) to the ignitor (CE). Make sure that the electrode wire (BC) is pushed in firmly. BC BC CE B CA CC IMPORTANT: Position regulator (CC) on the inside of the cart. 64 79 BB X 4 X 4 BB CB CC Position Valves (CB) into Burner Tubes (BB) before assembling. 17
12 CB CD CA 18
1 A TIGHTEN SCREW HALFWAY, AS SHOWN X 2 TIGHTEN SCREW HALFWAY, AS SHOWN X 2 19
1 B TIGHTEN ALL SCREWS EA X 2 EA C TIGHTEN ALL SCREWS D EA X 2 EA E 20
14 AB A AE AA AC AF 21
14 B 6 79 67 7 9 7 9 15 AD 6 79 67 15 7 AA C 6 79 67 7 9 7 15 9 AD AA 6 79 67 15 7 22
14 A 9 14 6 79 14 6 X 2 X 2 X 2 9 14 9 14 2
14 B ATTENTION: YOU WILL NEED TWO PEOPLE FOR THIS STEP. AA C 6 79 67 X 2 X 2 X 2 AD AA AD 7 9 7 9 24
15 BE CK BE BE BE FRONT BE BE 25
16 BF BF 26
17 BG AA BG 27
18 CG CF CG CG 28
19 DA DP DA DP 29
20 DA CC 16 DA 64 16 7 4 CC 0
21 A B DP DG C DP D CC 1
WARNING HOT SURFACES!!! CAUTION! AVOID BURNS! DO NOT TOUCH WHEN BBQ IS IN USE! EXTREMELY HOT SURFACE! * SHADED AREAS BECOME EXTREMELY HOT WHEN IN USE.
Visit www.masterchefbbqs.com to complete product registration Master Chef Customer Service 1-855-45-2150 Trileaf Distributions Trifeuil Toronto, Ontario M4S 2B8