NEW 430ZX PLUS MOST RELIABLE & FUEL EFFICIENT WHEELED LOADER Operating weight: 11250 kg Engine power: 99 kw (133hp) Payload: 3300 kg Standard shovel capacity: 1.7 cum Best-in-class Fuel Efficiency Most Reliable High Reach Z-Bar Best-in-class Operator Comfort Lowest Maintenance Cost Stay Connected 24x7
UNMATCHED PERFORMANCE Dumping ability: Dump at the center of high body dumper & railway wagon Range of bucket: 1.7 cu.m, 1.9 cu.m, 2.5 cu.m, 2.7 cu.m, Rock bucket (1.5 cu.m) High Reach Z-Bar Powerful engine: 133 hp High engine torque: 475 nm 2 430ZX PLUS I WHEELED LOADING SHOVEL
BEST-IN-CLASS FUEL EFFICIENCY Unmatched fuel efficiency with Ashok Leyland Engine: 3.2% less fuel consumption than its nearest competitor (litre/hour) Most efficient loader: 7%* more efficient (tonnes/litre) Efficient hydraulics: Twin pump with unloader valve Best-in-class hydraulic cycle time: 11.2 sec SAVE FUEL WORTH `1.50 * LACS IN 3 YEARS Twin Hydraulic Pump Fuel efficient hydraulics Control Valve with unloader feature *Terms & Conditions Apply 430ZX PLUS I WHEELED LOADING SHOVEL 3
New Ashok Leyland H Series Engine Pusher fan takes the heat away Reliable transmission and axles 4 430ZX PLUS I WHEELED LOADING SHOVEL
RUGGED & RELIABLE Strain gauged reinforced structures IP67-69 dust & waterproof connectors for electrical harness for higher reliability 430ZX PLUS I WHEELED LOADING SHOVEL 5
BEST-IN-CLASS OPERATOR COMFORT Adjustable, suspended operator seat for higher comfort Face fan located on rear RH side for operator comfort Lockable wider windows for better ventilation Kick-down button on operating lever for quick interchange of 1st and 2nd gear Press this button for first gear SPACIOUS CABIN NOISE & VIBRATION FREE CABIN 6 430ZX PLUS I WHEELED LOADING SHOVEL
LOWEST OPERATION COST Over ` 2 lacs savings on regular fuel and maintenance cost in 3 years 500 hrs change interval of engine oil 1000 hrs change interval of transmission & axles oil 2000 hrs change interval for hydraulic oil * T&C Apply 430ZX PLUS I WHEELED LOADING SHOVEL 7
EASE OF ACCESS & SERVICEABILITY India s best & largest dealer network Ease of serviceability from ground level Excellent engine & radiator accessibility through side & radiator covers In-built pressure testing ports Easily accessible air bleeding and greasing points Left service access Right service access 8 430ZX PLUS I WHEELED LOADING SHOVEL
Stay Connected 24x7 Now be assured of your JCB wheel loading shovel s service, operation and security with the advanced telematics system called Livelink *. SERVICE OPERATION SECURITY Livelink will notify you about the service requirement of your machine. It increases the efficiency of your machine and keeps it in a perfect working conditions. Livelink helps you maintain your machine health and manage your fleet better by alerting you of any variation in health indicators. It lets you know in real time, if your machine is facing a problem or needs any quick check-up. Livelink helps you to keep a track of your machine s location, protection and movement. Service reminder Reminds you when the service of your machine is due; the reminder helps you plan your work better. Machine utilisation report Maintains machine usage record and helps you analyse & optimise utilisation of machine. GPS tracking Tells you the exact position of your machine on a map. Machine data backup Helps to maintain the records of past services in an organised manner. Engine status Informs you if your JCB machine s engine is switched on or off. Operating hours Alerts you when the machine is used outside the working hours as set by you. Possible intrusion/ Tow away alert Critical machine health alerts Allowing you to know the inside of your machine from a faraway location. Helps in taking proactive measures to avoid breakdown through alerts like; Low engine oil pressure Coolant temperature Water in fuel Transmission oil temperature Helps you save your machine from intruders and possible tow aways. Geofencing Allows you to keep your machine within the allocated area of work. *Optional 430ZX PLUS I WHEELED LOADING SHOVEL 9
430ZX PLUS WHEELED LOADING SHOVEL I SPECIFICATION MAX ENGINE POWER : 133 hp (98 kw) @ 2200 RPM STD OPERATING WEIGHT : 11250 kgs STD LOADER CAPACITY : 1.7 cu.m. (Spade nose bucket) STATIC DIMENSIONS PERFORMANCE DIMENSIONS A Overall length with standard bucket 7060 mm B Axle to pivot pin 1389 mm C Wheel base 2850 mm D Axle to counterweight 1788 mm E Minimum ground clearance 431 mm F Height over exhaust 2927 mm G Cab roof width 1545 mm H Width over tyres 2225 mm H1 Wheel track 1846 mm J Height over cab 3156 mm M Dump angle max. 45 deg N Roll back angle at full height 52 deg O Roll back angle at carry 46.5 deg P Roll back angle at ground level 42 deg Q Load over height 3453 mm R Dump height (45 dump) 2806 mm S Dig depth 86 mm T Reach at dump height 1223 mm Bucket capacity (SAE heaped) 1.7 m 3 Bucket capacity (struck) 1.5 m 3 Bucket width Bucket weight Payload Tipping load straight Tipping load full turn Maximum breakout force Reach maximum (45 Dump) Pin height maximum Inside radius (w.r.t.tyres) Max radius 2348 mm 1006 kgs 3300 kgs 7470 kgs 6600 kgs 10379 kgf 1859 mm 3794 mm 2809 mm 5741 mm 10 430ZX PLUS I WHEELED LOADING SHOVEL
LOADER AXLES TYRES LIVELINK* Heavy duty 3 ram geometry (Z-bar linkage) providing high breakout forces with excellent loading characteristics. The pin, bush and sealing design on all pivot pins provide extended maintenance intervals. ENGINE Six cylinder-turbo charged Type : 4 stroke, direct injection Make & model : Ashok Leyland, H6ETIC3RU Bore/Stroke : 104 x 113 mm Displacement : 5.76 litres Gross power : 133 hp @ 2200 rpm Max. torque : 475 Nm @1700-1900 rpm Emission : BS - III, conforms to CMVR norms TRANSMISSION 4-wheel drive, automatic power shift transmission, electrically operated selector and gear change incorporating a speed inhibitor and modulation for responsive on-the-move direction and ratio changes. Single stage integral torque converter. Type : Automatic power shift Make & Model : ZF 4 WG-98 TC SPEEDS Max speeds Forward Reverse in each gear 1st Gear 4.9 kmph 4.8 kmph 2nd Gear 8.0 kmph 8.0 kmph 3rd Gear 19.0 kmph 19.4 kmph 4th Gear 25.9 kmph Type : Planetary hub reduction Make & model : ZF MTL 3055 Front & Rear Overall axle ratio : 19.84:1 Rear axle : ± 12.5 oscillations BRAKES Service: Hydraulic power braking on all wheels, operating pressure 40 bar. Dual circuit with accumulator backup provides maximum safety under all conditions. Out-board mounted, oil immersed, multi plate disk brakes. Parking : Mechanical disc type STEERING Q-Amp hydraulic system with integrated priority valve operating at 190 bar to provide low effort and smooth response. Steer ram located high in chassis to provide protection from damage. Adjustable steering column. Steering angle : ± 40 ELECTRICALS 24 volt negative ground system, 55 Amp alternator with 2 X100 AH low maintenance batteries. Ignition key start/stop. Other electrical equipment include 4 front and 2 rear work lights, registration plate lights front and rear, parking lights, direction indicators, reverse lights and alarm. Connectors IP 67 standard. Relays & fuses are well identified and conveniently located on the side console. Standard : 14 x 25(20PR)E3/L3 (Heavy duty) HYDRAULICS Twin gear pumps directly mounted on transmission. Twin spool remote mounted valve block with float. Main services are servo actuated from hydraulic remote lever with gear Kick-down switch and loader control through accumulator backup hydraulic supply unit. System pressure : 245 bar SERVICE CAPACITIES Hydraulic system : 125 litres Fuel tank : 195 litres Engine coolant : 25 litres Engine oil : 16 litres Transmission : 15 litres Rear axle : 17 litres Front axle : 17 litres OPTIONS Shovels 1.7 cu.m (spade nose) 1.9 cu.m 2.3 cu.m 2.5 cu.m Rock bucket 1.5 cu.m All dimensions may vary within 1.5% of nominal value. Photographs depicted may include optional equipment. Design & specifications are subject to change without prior notice or obligation. Advanced telematics system that enables you to monitor and manage your machines remotely by providing information on: Service : Routine maintenance information and alerts. Operation : Health alerts and usage data. Security : Machine location & movement data. CAB Cab supported on resilient mounting. Deluxe operator environment combines ergonomically located controls with a high level of appointment and low internal noise levels. Entry/Exit via large rear hinged door and anti-slip steps. Excellent forward visibility is provided by 3 section laminated windscreens. Extensive instrumentation includes electronic monitoring display unit for transmission functions and speedometer. Audio/visual monitoring includes engine oil pressure, transmission oil temperature and pressure, engine coolant temperature and blocked air filter warning. Sliding windows for ventilation (with lockable position). *Optional 430ZX PLUS I WHEELED LOADING SHOVEL 11
www.jcbindia.com infinity / May-2016 JCB INDIA LIMITED 23/7 Mathura Road, Ballabgarh - 121 004 Haryana, India. Fax: 91 129 2309050 For more information SMS JCB to 56767 or call our toll free no. 1800-2000-522 E-mail: delhi.marketing@jcb.com