The original: mobile, performance-based & cost-effective chipping Advanced logistical concept: Mobile chippers are normally powered via the PTO shaft of a tractor or a fitted engine. The Chippertruck, in contrast, has the chipper mounted on the lorry and is powered by the lorry engine. Operating range: Ŷ Intended to be used for the highpowered chipping of whole trees up to 560 mm in diameter, as well as for forest residue and cut shrubbery. Different work locations can be reached quickly due to the MAN carrier vehicle. Complete solution from a single source: Ŷ The most cost-effective product in its category due to the perfectly matched components. Ŷ One drive engine for chipping and travel purposes: An optimum degree of cost-efficiency results from using a single powerful drive engine for both chipping operation and travelling. 31 PG Nr 6 englisch.indd 31 18.01.2012 10:34:09
The original: mobile, performance-based & cost-effective chipping Ŷ Perfect balance between capacity and mobility. A low machine weight (less than 24 t) means that the amount of chips loaded can be increased by approx. 35 to 40 loose cubic metres. Ŷ Logistical advantage due to high degree of mobility (motorway speeds of up to 80 km/h). Ŷ Low tyre wear due to steerable rear axle. Ŷ Wheelbase of 3,600 mm between 1st and 2nd axle. Ŷ Good manoeuvring properties on narrow terrain due to extremely small turning circle (16.6 m). Ŷ Good environmental performance due to the use of diesel engines conforming to Euro-5 emission specifications. Ŷ Standard outfeed blower transfers processed material to large vehicles with a high degree of precision. Ŷ Lowest fuel consumption rate of its category. 32 PG Nr 6 englisch.indd 32 18.01.2012 10:34:15
Outstanding range of configuration options for tailored perfection: The is manufactured along with the powerful HEM 582 R mobile chipper. The segregation area, which has been increased by 30%, ensures the highest possible throughput rates. The lengths of time needed for tool changes and setting up for operation are short due to the hydraulic locks of the table and the tool-free changing of the screen basket (by the innovative hydromechanical system acting at the screen basket cover). Optimum operation of the machine can be achieved via the state-of-the-art easygreen control system. Various MAN base vehicles available: MAN TGS 6x4-4 BL or 6x6 BB Engine power: 397 kw (540 hp) or 353 kw (480 hp). XL cab : The cab has been specifically modified by MAN on the passenger s side, with glazing suitable for mowing applications. A comfortable swivel seat, two ergonomically designed joysticks and soundproofing create a workplace, where high standards for seating comfort, ergonomy and safety are satisfied. An EPSILON crane (of type M110L 97), with a maximum range of 9.7 m and a net load torque of 82.5 knm at an operating pressure of 190 bar, is provided as standard. short facts Model: Performance: hardwood: up to 42 cm in diameter softwood: up to 56 cm in diameter throughput rate: up to 180 lcm/h Intake opening: 680 x approx. 1,200 mm Rotor diameter: 820 mm Number of blades: 12 blades (optional, 24 blades) Material outfeed: Blower, optional with conveyor belt Main drive: Via MAN carrier vehicle, with power rating of 353 kw (480 hp) or, optional, 397kW (540 hp) 33 PG Nr 6 englisch.indd 33 18.01.2012 10:34:19
The original: mobile performance-based & cost-effective chipping As an alternative to the XL cab, the vehicle can also be manufactured with a shorter M cab and a separate crane cab that is adjustable in height. This provides the operator with good all-round visibility of the work area. On top of the series production model, various types of loading cranes with different ranges and a net lifting torque of up to 145 knm can be supplied. An EPSILON crane (of type M120L 97), with a maximum range of 9.7 m and a net load torque of 90 knm at an operating pressure of 200 bar, is fitted as standard. 34 PG Nr 6 englisch.indd 34 18.01.2012 10:34:26
Innovative technology that meets the highest demands: Using a conveyor belt significantly reduces the levels of noise and dust emission at the machine, and makes it possible to process materials in places where previously this would only have been only achievable with the greatest difficulty. The belt can be laterally swivelled through an angle of up to 170 and can be vertically adjusted, with a maximum ejection height of 5 metres. Compared to the case where an ejection blower is used, chips delivered by a conveyor belt have fewer fine particles, and for the machine there is a significant reduction in fuel consumption and power, with the machine being subjected to more gentle loads. The optional hydrostatic traction drive unit with electrohydraulic remote steering and an associated maximum travel speed of 3.5 km/h enables stacks of long logs and material at construction sites to be processed efficiently, without any delays. The solid 4-point support ensures a high degree of stability during operation. 35 PG Nr 6 englisch.indd 35 18.01.2012 10:34:29