PRODUCT SPECIFICATION CONVEYOR RANGE www.terex.com/ecotec
TSC 65T & TSC 80T Terex Ecotec s range of mobile conveyors are designed to work in conjunction with the existing Ecotec product portfolio. Using conveyors increases stockpile capacity and reduces onsite material handling. For convenience and to keep shipping costs low, the conveyors can be easily transported in a 40ft container. The range includes 65ft and 80ft tracked mobile conveyors: TSC 65T and TSC 80T. TSC 65T TSC 80T Length 11.3m (37 ) 11.88m (38 11 ) Width 2.25m (7 5 ) 2.25m (7 5 ) Height 2.53m (8 4 ) 2.54m (8 4 ) 12,750kg 16,000kg (28,109lbs) (35,274lbs) 40 x 9 6 Steel lined feedboot as standard providing extended wear life. Feedboot extensions and rubber lined options also available Hydraulic angle adjustment from 0 to 28 for easy plant integration* Hydraulic adjustment for variable feed height reduces impact and provides optimal material transfer Compact folding mechanism allows containerised shipping as one unit TSC 65T TSC 80T Conveyor length 20m (65 7 ) 23.5m (77 ) Belt width 1,050mm (42 ) 1,050mm (42 ) Discharge height 8.7m (28 6 ) @ 24 9.95m (32 8 ) @ 24 Max. discharge height 10m (32 10 ) @ 28 10.1m (33 2 ) @ 25 Up to 400TPH Up to 400TPH (441 US TPH)** (441 US TPH)** Tier 3 (Stage 3A) Deutz D2011 L04I - 36.4kW (49HP) Tier 4F (Stage 4) - US Only: Deutz TD2.9 L4-41kW (56HP) TSC 65T TSC 80T Feed boot liners: AR 400 plate or 20mm rubber Feed boot extension Chevron belt Blade scraper Head drum guards Under guards Dust covers Dust suppression water spray at head drum Conveyor drive - direct electric Full length skirting *Varies depending on conveyor length. See detailed specification for each conveyor. **Output potential dependent on feed material and settings. August 2018. Dual-speed tracks for quick and controlled deployment 02 03
TSC 100T TRC 75 The TSC 100T builds on the hugely successful TSC 65T and TSC 80T conveyors. The increased conveyor length and power allows for maximum mobility and flexibility, reducing or eliminating the use of wheeled loaders onsite. The TSC 100T can cope with all applications and although 100ft long it still has the ability to be transported globally in a 40ft container. Steel lined feedboot as standard providing extended wear life. Feedboot extensions and rubber lined options also available Hydraulic adjustment for variable feed height reduces impact and provides optimal material transfer developing 82kW (110 HP) @ 1800rpm Fuel tank volume: 180 litres The TRC 75 Tracked Radial Stockpiling Conveyor is capable of stockpiling material from primary/ secondary shredders and screens. The mobility and flexibility of the TRC 75 eliminates the double handling of material with wheel loaders onsite. The TRC 75 caters for a range of applications including compost, C&D waste, sand and gravel, topsoil and waste wood. Fuel tank volume: 180 litres Dual-speed tracks for quick and controlled deployment TSC 100T Length 19.5m (63 11 ) Width 2.84m (9 4 ) Height 3m (9 9 ) 24,000kg (52,910lbs) TSC 100T Conveyor length 30m (98 5 ) Belt width 1,050mm (42 ) Discharge height 10.5m (34 5 ) @ 18 Max. discharge height 14.3m (46 11 ) @ 28 Up to 600TPH (661 US TPH)** 6mm removable wearplate liners 20mm rubber wear feedboot liners Feedboot extension complete with steel liners Feedboot extension complete with 20mm rubber liners Impact bed at feedboot area Impact rollers at feedboot area Full length side skirting along main conveyor Conveyor head drum guarding Dust suppression at conveyor head drum (spray bar only) Pull cord emergency stop running length of conveyor Canvas dust covers Conveyor twin drive motors TRC 75 Length 15.6m (51 3 ) Width 2.25m (7 5 ) Height 3m (9 9 ) 19,500kg (42,990lbs) TRC 75 Conveyor length 22.9m (75 2 ) Belt width 1,050mm (42 ) Discharge height 9m (29 6 ) @ 18 Max. discharge height 10.9m (35 9 ) @ 23 Up to 600TPH (661 US TPH)** Radio remote to start/stop feeder, raise/lower discharge conveyor Manual adjusting jacking legs at tail side of feeder to adjust tail height Hopper lined 6mm wearplate Hopper flares lined 6mm wearplate Mild steel liners bolted into hopper 04 05
TFC 75 TFC 75L The TFC 75 High Level Feeder Conveyor is a robust, high capacity hopper feeder that is suited to the most demanding of applications. Operators have the ability to directly discharge from wheel loaders/excavators eliminating the double handling of material onsite. The fully mobile TFC 75 allows a controlled feed of material into Ecotec shredders and screens. Terex Ecotec s TFC 75L Low Level Feeder Conveyor allows the operator to directly discharge from wheel loaders and excavators at a significantly lower infeed height compared to standard hopper feeders. The unique hopper design allows for rear feeding which is an advantage when operating in inhibited areas. Fuel tank volume: 325 litres Fuel tank volume: 325 litres HIGH LEVEL FEEDER Length 19.5m (63 11 ) Width 2.75m (9 ) Height 3.12m (10 2 ) 25,000kg (55,115lbs) 2 x s HIGH LEVEL FEEDER Conveyor length 22.6m (74 2 ) Belt width 1,200mm (47 ) Discharge height 8m (26 3 ) @ 18 Max. discharge height 9.8m (32 2 ) @ 24 Up to 500TPH (551 US TPH)** Twin drive discharge conveyor Discharge conveyor drive drum upgraded to ceramic lagging Radio remote to start / stop feeder, raise / lower discharge Twin drive feed conveyor 4 or 6 tipping grid fitted to feed conveyor LOW LEVEL FEEDER Length 19.6m (64 4 ) Width 2.75m (9 ) Height 3m (10 ) 24,000kg (52,910lbs) 2 x s LOW LEVEL FEEDER Conveyor length 22.6m (74 2 ) Belt width 1,200mm (47 ) Discharge height 8m (26 3 ) @ 18 Max. discharge height 9.8m (32 2 ) @ 24 Up to 500TPH (551 US TPH)** Twin drive discharge conveyor Discharge conveyor drive drum upgraded to ceramic lagging Radio remote to start / stop feeder, raise / lower discharge conveyor Manual adjusting jacking legs at tail side of feeder to adjust tail height Feed conveyor drive drum upgraded to ceramic lagging Hopper lined 6mm wearplate Hopper flares lined 6mm wearplate Mild steel liners bolted into hopper 06 07
DUNGANNON 32 Farlough Road Dungannon, Co. Tyrone BT71 4DT, Northern Ireland Tel: +44 (0) 28 87 718 500 NEWTON 22 Whittier Street Newton, New Hampshire USA, 03858 Tel: +1 (603) 382 0556 Dealer Stamp: August 2018. The material in this document is for information only and is subject to change without notice. Terex Ecotec assumes no liability resulting from errors or omissions in this document, or from the use of the information contained herein. Due to continual product development we reserve the right to change specifications without notice. Any product performance figures given in this brochure are for guidance purposes only. This information does not constitute an expressed or implied warranty or guarantee, but shows text examples provided. These results will vary depending on product settings, screen media and sizes, feed source and types of material being processed. Photographs are for illustrative purposes only. Some or all of the machines in the illustrations may be fitted with optional extra. Products and services listed may be trademarks, service marks or trade names of Terex Corporation and/or its subsidiaries in the USA and other countries. All rights reserved. Terex is a registered trademark of Terex Corporation in the USA and many other countries 2018 Terex Corporation. www.terex.com/ecotec