R VictorTaichung Art of Smooth Performance Servo turret One-piece slant bed Box slideways High thrust force High Rapid feeds Rotary operation panel Victor Taichung an established ISO 91 & 141 company
Smooth & Steady Performance Vturn-S26 Turning center One piece 3 slant bed Large swing diameter 6 mm 1" power chuck Z-axis travel 61 mm High thrust force 1441 kgf High rapid feed /24 m/min (X/Z) Machine weight 613 kg C-axis available Spindle 22kW (S3-25%) Spindle output 574 Nm (S3-25%) Low base speed 37 rpm only NN type (roller type) bearings Shortened belt length Victor Taichung's own spindle Power (kw) Torque (N-m) 75 574 6 45 341 15 25 2.5 15 11 1 5 15min Operating zone 62 91 25 5 75 1 125 37 1154 Low winding 15min Operating zone 11 7.5 Power (kw) Torque (N-m) 22.5 15 75 6 475 45 399 324 15 39 5 1 15 2 25 35 32 442 238 2654 High winding 3 24 12 6 S3 25% 3min Operating zone S3 25% 3min Operating zone 14.4 11.7 25 5 75 1 125 37 769 1154 5 1 15 2 25 35 442 238 2654 1
Servo Turret.8 sec. (adjacent tools) Turret indexing time.8 sec (adj.), 1. (opposite) High thrust (Z-axis) 1441 kgf (14.1 kn) Milling turret BMT-65 (3-piece coupling) 12 stations live tools Milling power 4.5kW/4rpm (opt. 6rpm) Victor Taichung's own turret Torque (Nm) 6 5 4 3 2 1 Maximum Torque=54 Nm Intermittent Operating Stall Torque= Nm Continuous Operating Certificated Casting GM4 GA35 Boxways 64/8 mm (X/Z) High rapid feeds /24 m/min Smooth operation guaranteed Victor Taichung's own casting 1 2 4 5 6 Motor speed (rpm) Fanuc α22is/6 (4.5 kw) Tailstock MT-5 Twin cylinder clamping Tow along by turret Opt. MT-4 with built-in bearings 2
Standard and Options Fanuc i-tf (type-1) control with 8.4" screen Programmable tailstock (MT-5) Rotary operation panel Door moving along LM guideways Coolant flush onto Z-axis covers Built-in LED light Chip conveyor Conveyor motor cover (opt.) Chip conveyor (std.) Coolant flush (std.) Tool presetter (opt.) Tooling accessories (excl. BMT turret model) TOOLS \ MODEL Vturn-S26 Tool shank for turret disk 25 mm (1") Maximum boring bar dia. 5 mm (2") Face + OD cutting tool holder 1 Face + ID. cutting tool holder 1 Boring bar holder 4 mm (1 1/2") 7 5 mm (2") - Boring bar sleeve 8 mm (5/16") 1 1 mm (3/8") 2 12 mm (1/2") 2 16mm (5/6") 2 2 mm (3/4") 2 25 mm (1") 2 32 mm (1 1/4") 2 Drill socket MT1 Opt. MT2 1 MT3 1 MT4 1 U drill socket 2 mm Opt. 25 mm (1") 1 32 mm (1 1/14") 1 O.D & Face tool I.D & Face tool U Drill Large dia. boring bar Small dia. boring bar Drill Face & O.D cutting tool holder Face & I.D cutting tool holder U Drill socket Boring bar sleeve Boring bar sleeve Drill socket (MT#) For direct mounting on turret Taper slice Mounting block U -drill holder Clamp block Boring bar / drill holder Turret disc 3
Transformer, A/C for cabinet (opt.) 1.4" / 15" screen with Manual Guide I (opt.) Part catcher (opt.) Oil skimmer (opt.) BMT-65 turret (opt.) C-axis Application Vturn-S26CM with BMT-65 Milling Turret (Optional) O.D. tool : 25 (1 ) O.D. tool holder 25 (1 ) 1 35 35 O.D. tool holder 25 (1 ) 36.5 37 37 ø8.5 7 Face & I.D. tool : 25 (1 ) Face & I.D. tool holder 25 (1 ) 38 11.8 17 U-drill Boring bar Boring bar Drill I.D.ø32 (I.D.ø1-1/4 ) I.D.ø25 (I.D.ø1 ) I.D.ø2 (I.D.ø3/4 ) I.D.ø32 (I.D.ø1-1/2 ) I.D.ø25 (I.D.ø1 ) I.D.ø2 (I.D.ø3/4 ) I.D.ø16 (I.D.ø5/8 ) I.D.ø12 (I.D.ø1/2 ) I.D.ø1 (I.D.ø3/8 ) I.D.ø 8 (I.D.ø5/16 ) U-drill socket Boring bar sleeve Boring bar sleeve I.D.MT1# O.D.ø4 I.D.MT2# O.D.ø4 (I.D.MT2# O.D.ø1-1/2 ) I.D.MT3# O.D.ø4 (I.D.MT3# O.D.ø1-1/2 ) Drill socket Boring bar/drill holder I.D.ø4 (I.D. ø1-1/2 ) Live tool holder ( ) 36.5 37 1 35 35 37 ø8.5 36.5 17 ø8 7 1 ø65 ø46 4M12xP1.75x22 1.5 33 Drill/mill DIN 6499 (ER32) Collet Live tool holder (9 ) 38 11.8 36.5 17 ø8 17 4M12xP1.75x22 4
VICTOR Taichung s FANUC i-tf 8.4 Control (Type I) Specifications Standard ITEM\SPECIFICATION DESCRIPTION Controlled Axes: 1. Controlled axes 2 Axes (X, Z) 2. Simultaneous controlled axes 2 Axes 3. Least input increment.1mm 4. Least command increment.5mm (X) /.1mm (Z) 5. Command system Incremental / Absolute 6. HRV Control HRV3+ 7. Unexpected disturbance torque detection (AIR-BAG) Std. 8. Backlash compensation Std. 9. Stored pitch error compensation Std. Operation & Program Input: 1. Input / Output interface RS-232, PCMCIA Card, USB 2. Tool offset 99 sets 3. Sequence number N5-Digit 4. Program number O8-Digit 5. Program name 31-characters 6. M code function M3-digit 7. S code function S4-digit 8. T code function T4-digit 9. Positioning G 1. Linear interpolation G1 11. Circular interpolation G2, G3 12. Programmable data input G1 13. Plane selection G17~G19 14. Inch / Metric conversion G2 / G21 15. Reference position return G28, G3 16. Thread cutting G32, G34 17. Threading retract Std.. Tool nose radius compensation G4~G42 19. Work piece coordinate system G52~G59 2. Macro, Sub program call G65, M98, M99 (1 folds nested) 21. Multiple repetitive cycle I & II G7~G76 22. Canned cycle for drilling G8~G89 23. Canned cycles G9, G92, G94 24. Program stop / end M~M2 / M3 25. Rigid tapping (Spindle) M29 26. Dynamic graphic display (for 8.4") Std. 27. Manual Guide i (for 8.4") Std. 28. Manual Guide I (for 1.4/15") Opt. 29. Optional blocks skip 2-9 Std. Feed Function: 1. Manual handle feed rate X1, X1, X1 2. Rapid traverse rate F, 25%, 5%, 1% 3. Cutting feed rate ~15% 4. Spindle override 5~12% 5. Feed er Minute / Revolution G98 / G99 Edit Operation: 1. Part Program Storage Length (in total) 128m / 512kB (i / 32iB) 2. Number of Registerable programs (in total) 4 3. Part Program Editing Std. C Axis Function: 1. Polar coordinate interpolation Std. (G112/G113) 2. Cylindrical interpolation Std. (G17) 3. CS contouring control Std. 4. Spindle control with servo motor G96.4 5. Coordinate System Rotation Std. OPTIONS With hardware included 1. Tool life management 2. Program restart 3. Date server (with PCB and ATA card) 4. Fast Ethernet (1Mbps, available in Data server) 5. CC Link (required for robot) 6. PROFIBUS slave Without hardware included 7. Part program storage length (512m/2MB) 8. Number of registerable programs 1 9. Circular thread cutting (G35,G36) 1. AICC-1 (G5.1 Q1, 4 blocks) 11. AICC-2 (G5.1 Q1, 2 blocks) 12. Helical interpolation (C-axis only) 13. Arbitrary speed threading Optional Spindle Output (.5/22/26 KW, S3-25%) Machine Color Option Torque (N-m) 75 682 6 45 43 15min Operating zone Torque (N-m) 75 6 561 475 45 399 S3 25% 3min Operating zone 15 153 91 25 5 75 1 125 1154 Low winding 15 5 1 15 2 25 35 442 238 2654 High winding 47 39 Standard Power (kw) 25 22 2 15 13 1 5.5 15min Operating zone 11 Power (kw) 26 22.5 3 24 12 6 S3 25% 3min Operating zone 17.2 14.4 25 5 75 1 125 37 769 1154 5 1 15 2 25 35 442 238 2654 5 RAL-724
Interference Chart / Operating Range Vturn-S26 Ø34 Ø5 54.988 Ø199 4 766.35 42 25 Ø6 Ø256 Ø271 26 22 4 24(X-travel) Ø43 215 25 342 Ø35 3 63 166 61(Z-axis travel) 96 51(Z-axis zero point) 7 24 (X-axis travel) 25 21 5 (X-axis zero point) 5 129 113 1 power chuck 1 1 43(Stroke of tailstock) (Quill taper stroke tailstock) 1 7 Vturn-S26CM Ø16 Ø25 39.5 13 72 1 Ø4 91 Ø4 5 Ø16 Ø256 Ø285 Ø42 166.5 61(Z-axis travel) 1 1.5 56(Z-axis zero point) 55 4753 5 85 58 55 (Max.) Ø289.131 22.488 Ø251.32 Machine Layout 21 89 64 2888 7 3 1768 582 15 48 42 178 1138 51 646 35 72 766.35 Ø665 9.5 25 Ø43 Ø266.17 4 Ø251.32 21 19 75 24(X-travel) 342 3 141 1 75 1 51 24 X-axis travel 3 25 5 (X-axis zero point) 55 19 51 1 113 8 129 1 power chuck 1 1 43(Stroke of tailstock) (Quill taper stroke tailstock) 3 475 427.5 557.5 596.5 538 545.5 4 1362 484 1152.5 1 169 1 149 193 127.5 4 85 548 74.5 27.5 1 2865 1 59 4 63 153 32 1369 2888 976-2635 458 1668 6
R R R Machine Specification Item Unit Vturn-S26 (CM) CAPACITY AXIS FEEDS SPINDLE TURRET TAILSTOCK CAPACITY Swing over bed dia. mm ø6 Standard turning dia. mm ø35 (ø285) Maximum turning dia. mm ø43 (ø42) Swing over carriage dia. mm ø48 Between centers mm 55 Bar capacity (Hole thru draw bar) mm ø75 (opt. 77) X axis travel mm 215+25 (21+3) Z axis travel mm 61 Rapid feed - X / Z axis m/min / 24 Feed motor - X / Z axis kw 4 / 4 JOG feed m/min X/Z: ~126 Ball screw dia x pitch mm ø32 P6 (X), ø4 P8 (Z) Spindle speed rpm 35 (opt. 25) Spindle nose (chuck) inch A2-8 (1") Spindle motor power (cont./3min/25%) kw 15 /.5 / 22 (opt..5 / 22 / 26) Spindle bearing inside dia. mm ø13 Spindle taper 1/2 No. of tools (live) 1 (12) servo Tool shank size mm 25 Max. boring bar dia. mm ø5 (BMT-65) Exchange time (T-T) sec.8 (.81) - adjacent 1. (1.25) - opposite Milling speed rpm 4 (opt. 6) Milling motor kw 4.5 Tailstock quill dia. mm ø11 Quill stroke mm 1 Quill taper MT #5 (opt. MT#4) NC controller Fanuc i-tf (8.4") Coolant tank capacity L 33 Power requirement kva 27 (29) Machine dimension LxWxH (with chip conveyor) mm 417 x 48 x 19 Net weight kgs 613 (623) * Machine and controller specifications are subject to change without notice. Standard Accessories: Fanuc i-tf(8.4") with Manual Guide i Hydraulic chuck with soft jaws Programmable tailstock Chip conveyor Fully enclosed splash guarding Hand wheel Tool holders (for standard turret only) Coolant flush on Z-axis cover 3 step warning light Optional Accessories: Fanuc i-tf(1.4") with Manual Guide I (MGI) Manual tool presetter Auto tool presetter Parts catcher (swing type) KITAGAWA power chuck Air conditioner for electrical cabinet (Panel cooler) 12" chuck ( rpm spindle) Higher pressure coolants Bar feeder interface Air blow Oil skimmer Oil mist collector Auto door Hard jaws Tailstock center Transformer C-axis (Vturn-S26CM) VictorTaichung profile: Sales turnover: USD 145 mil's (in 217)* No. of employees: 859 *Exchange rate: 1 USD=3 TWD. 1162 TEL: 4-24733326 THE VICTOR-TAICHUNG COMPANIES HTL VTL VMC HMC XMT PIM TAIWAN http://www.victortaichung.com E-mail :info@mail.or.com.tw Victor Taichung Machinery Works Co., Ltd. Headquarters: 288, Sec. 4, Taiwan Blvd., Taichung, Taiwan, R.O.C. TEL : 886-4-2359211 FAX : 886-4-23592943 Overseas Marketing Division: TEL : 886-4-235871 FAX : 886-4-23584541 UK Victor CNC (UK) Ltd. TEL : 44-1-76-648485 FAX : 44-1-76-648483 VictorTaichung was also marketed under the brand names FRANCE Victor France TEL : 33-1-64772 FAX : 33-1-6477263 GERMANY Victor GmbH TEL : 49-2261-478434 FAX : 49-2261-478327 MALAYSIA Victor Machinery (M) SDN. BHD. TEL : 6-3-56337 FAX : 6-3-56337191 THAILAND Victor (Thailand) Co. Ltd. TEL : 66-2-9263735 FAX : 66-2-932373 INDONESIA PT. Victor Machinery Indonesia TEL : +62-21-8895854 FAX : +62-21-88958513 (outside North America) and USA Fortune International Inc. TEL : 1-732-2147 FAX : 1-732-21471 SOUTH AFRICA Victor Fortune (PTY) Ltd. TEL : 27-11-39238 FAX : 27-11-3923899 CHINA Victor Taichung Machinery (Shanghai) TEL : 86-21-59768 FAX : 86-21-597688 GV1GEEA