PRODUCT SPECIFICATION Solid State Relays 28&29 Series www.wernerelektrik.com
Technical Data...1 Model Number Selection Panel Mounting Type... 2 PCB Mountable... 3 Solid State Relay... 7 Model Number Structure Relays... 10 Thermal Derate Curve... 11 Onetouch Mounting Plate...12
Solid State Relay B1 B2 0A 1. 4.02 28.0 ID SOL ELA TE R STA C 0VD T INPU 53 4 5 LA C RE VA TE 480 A1 STA 24LID.34 SO 5 C2 SE 9.23.5 HA 2 3P A2 D LOA DC V 0 225 WERNER`s are designed for the ultimate applications in the world of LVSwitchgear building where electronic switching is required, if it comes to control switch tensions of up to 480V (DC) and handling of current of up to 100 Amperes at the same time. They come in 4 different mounting types, from which 3 are even cleverly designs for direct mounting on your PC boards. Features Overview Unique designed heat sinks save space and provide maximum heat dissipation Builtin snubber circuit protects against external surges with high efficiency All AC models come with built in '0' Crossing circuit as a standard feature All models available for use with 50 Hz and 60 Hz cycles Use 29 Series for 2 & 3 Phase Output Built in Reverse voltage protection Highlights Find the right model for any load current between 2 and 100 Amperes Providing much higher operation frequency than mechanical relays Choose between AC and DC as the control Voltage for all models Highly extended lifetime by means of no moving parts Operation Indicators visualize the operational state All Solid State Relays are fully sealed type by WERNER are made for contact free switching without any moving parts and provide as such tremendous lifetime without any maintenance needed in a totally sealed housing, protecting them from all kinds of hazardous environmental influences and all this comes combined in a very space saving compact design.
Features: Wide Lineup of Generalpurpose Solid State Relays with Applicable Loads of 2 to 100 A A1 0A B1 5 LA AC RE 80V ATE 244 ID ST L 4 SO.55.3 C2 3 29.2 B2 SE HA A2 3P Finger protective guard for greater safety. LED indicator enables monitoring operation. All models feature the same compact dimensions to provide a uniform mounting pitch. D LOA DC 50V 122. 4.02 28.0 Builtin varistor effectively absorbs external surges. SOLID E STAT RELA T INPU 5 30 4 Approvals Approbations and Declaration of conformity R UL CE RoHS CCC D S Model Number Selection Panel Mounting Type Image LOAD 0 1225.02. 28. SOLID A REL STATE 5 30 4 T INPU Mount Control Voltage Load Current Load Voltage Model No. 332 332 332 332 332 332 332 332 332 332 332 332 332 332 2A 5A 20A 25A 30A 40A 50A 60A 70A 75A 80A 90A 100A 24240VAC 24240VAC 24240VAC 24240VAC 24240VAC 24240VAC 24240VAC 24240VAC 24240VAC 24240VAC 24240VAC 24240VAC 24240VAC 24240VAC 28..22.02 28..22.05 28..22.10 28..22.20 28..22.25 28..22.30 28..22.40 28..22.50 28..22.60 28..22.70 28..22.75 28..22.80 28..22.90 28..22.100 1
Model Number Selection Panel Mounting Type Mount Control Voltage Load Current Load Voltage Model No. 80250 VAC 80250 VAC 80250 VAC 80250 VAC 80250 VAC 80250 VAC 80250 VAC 80250 VAC 80250 VAC 80250 VAC 80250 VAC 80250 VAC 80250 VAC 80250 VAC 2A 5A 20A 25A 30A 40A 50A 60A 70A 75A 80A 90A 100A 24240VAC 24240VAC 24240VAC 24240VAC 24240VAC 24240VAC 24240VAC 24240VAC 24240VAC 24240VAC 24240VAC 24240VAC 24240VAC 24240VAC 28..32.02 28..32.05 28..32.10 28..32.20 28..32.25 28..32.30 28..32.40 28..32.50 28..32.60 28..32.70 28..32.75 28..32.80 28..32.90 28..32.100 530 530 530 530 530 530 530 530 530 530 530 530 530 530 2A 5A 20A 25A 30A 40A 50A 60A 70A 75A 80A 90A 100A 12250 12250 12250 12250 12250 12250 12250 12250 12250 12250 12250 12250 12250 12250 28..44.02 28..44.05 28..44.10 28..44.20 28..44.25 28..44.30 28..44.40 28..44.50 28..44.60 28..44.70 28..44.75 28..44.80 28..44.90 28..44.100 Image LOAD 0 1225.02. 28. SOLID A REL STATE 5 30 T INPU 4 LOAD 0 1225.02. 28. SOLID A REL STATE 5 30 4 2 T INPU
PCB Mountable Appearances Model No. TPE 1 TPE 2 TPE 3 28.01.12.02 28.02.12.02 28.03.23.05 Gurantee close voltage 1 Gurantee open voltage 3 Load mini current 0.05A Control voltage 5 332 Control current 625 ma 420 ma 32 Breakover voltage 1VAC 1.6 VAC Output leakage current 1 ma 5 ma 24280VAC 24440VAC 2A 5A Reverse voltage Load voltage Load max current Frequency range 5060 Hz Operating temperature 2070 C resistive load 5060% Inductive load 30% Load current safty factor Medium withstand voltage Insulating resistance Switching time Dimensions TPE 1 TPE 2 24 TPE 3 43.5 2.5 7.5 13 + 30 10.5 10.5 13 Load Voltage 5 Load 8 10.5 8 7.5 5.5 + Control source 20 20 39.5 3
Model Number Selection Panel Mounting Type Image HA A2 3P A1 B2 A 50 ELA B1 R C V A TATE 480 D S 4 24 LI.3 C2 SO 3.55 SE 29.2 B2 A 50 ELA B1 R C V A TATE 480 D S 4 24 LI.3 C2 SO 3.55 SE 29.2 HA A2 3P A1 4 Mount Control Voltage Load Current Load Voltage Model No. 332 332 332 332 332 332 332 332 332 332 332 20A 25A 30A 40A 50A 60A 70A 80A 90A 100A 75480VAC 75480VAC 75480VAC 75480VAC 75480VAC 75480VAC 75480VAC 75480VAC 75480VAC 75480VAC 75480VAC 29..11.10 29..11.20 29..11.25 29..11.30 29..11.40 29..11.50 29..11.60 29..11.70 29..11.80 29..11.90 29..11.100 80250 VAC 80250 VAC 80250 VAC 80250 VAC 80250 VAC 80250 VAC 80250 VAC 80250 VAC 80250 VAC 80250 VAC 80250 VAC 20A 25A 30A 40A 50A 60A 70A 80A 90A 100A 75480VAC 75480VAC 75480VAC 75480VAC 75480VAC 75480VAC 75480VAC 75480VAC 75480VAC 75480VAC 75480VAC 29..21.10 29..21.20 29..21.25 29..21.30 29..21.40 29..21.50 29..21.60 29..21.70 29..21.80 29..21.90 29..21.100
Type 4 LOAD C 50VD 122 LOAD C 02. 28.. Appearances SOLID E STAT 02. 28.. RELA 4 Model No. SOLID 5 30 50VD 122 E STAT RELA 5 30 PUT IN T INPU 4 28..2*.** 28..3*.** Gurantee close voltage 1 30 VAC Gurantee open voltage 3 80 VAC Load mini current 0.05A Control voltage 332 80250 VAC Control current 420 ma 320 ma Reverse voltage 32 NO 1.6 VAC Breakover voltage 5 ma Output leakage current Load voltage 24240VAC 75480VAC Load max current, 20a, 25A, 30A, 40A, 50A, 60A, 70A, 75A, 80A, 90A, 100A Frequency range 5060 Hz Operating temperature 2070 C resistive load 5060% Inductive load 30% Load current safty factor Medium withstand voltage Insulating resistance Switching time Dimensions 2Ø44 Load Fusiblelink Load voltage 1 2 4 3 48 57 44 26.5 25 42 Control Source 3.32 + or 80 250VAC Note: ** Stands for amps 5
Type 4 LOAD C 50VD 122 02. 28.. Appearances SOLID E STAT RELA 5 30 4 Model No. T INPU 28..44.** Gurantee close voltage 1 Gurantee open voltage 3 Load mini current 0.05A Control voltage 530 Control current 420 ma Reverse voltage 32 1.6 VAC Breakover voltage 5 ma Output leakage current Load voltage 12250 Load max current, 20a, 25A, 30A, 40A, 50A, 60A, 70A, 75A, 80A, 90A, 100A Frequency range 5060 Hz Operating temperature 2070 C resistive load 5060% Inductive load 30% Load current safty factor Medium withstand voltage Insulating resistance Switching time Dimensions 2Ø44 Load Fusiblelink Load voltage 1 2 4 3 48 57 44 26.5 25 42 Control Source 3.32 + or 80 250VAC Note: ** Stands for amps 6
Solid State Relay R 332 C y Rela State 75480VA Solid voltage R Load 3 t Inpu 332 Relay VAC State 75480 Solid voltage Load 3 t Inpu Model No. 29..21.90 29..21.150 Gurantee close voltage 1 Gurantee open voltage 3 Load mini current 0.05A Control voltage 332 Control current 625 ma Reverse voltage 32 Output leakage current 160A300A 300A400A 8 ma Load voltage 75480VAC 60A90A 100A150A Frequency range 5060 Hz Operating temperature 2070 C Load current safty factor 29..21.400 1.6 VAC Breakover voltage Load max current 29..21.300 resistive load 5060% Inductive load 30% Medium withstand voltage Insulating resistance Switching time Dimensions 7
Solid State Relay A1 B2 A 50 ELA B1 AC TE R 0V TA 48 ID S 4 24 L.3 C2 SO 3.55 SE 29.2 A 50 ELA B1 AC TE R 0V TA 48 ID S 4 24 L.3 C2 SO.55 E 9.23 2 B2 S HA HA A2 3P A1 A2 3P Appearances Model No. 29..11.** 29..21.** Gurantee close voltage 1 30 VAC Gurantee open voltage 3 80 VAC Load mini current 0.05A Control voltage 332 80250 VAC Control current 1030 ma 830 ma 32 NO Reverse voltage 1.6 VAC Breakover voltage Output leakage current 5 ma Load voltage 24480VAC Load max current, 20A, 25A, 30A, 40A, 50A, 60A, 70A, 80A, 90A, 100A Frequency range 5060 Hz Operating temperature 2070 C Load current safty factor resistive load 5060% Inductive load 30% Medium withstand voltage Insulating resistance Switching time Dimensions Note: ** Stands for amps 8
Model Number Structure Relays D LOA C 50VD 122 02. 28.. SOLID E STAT 4 RELA T INPU 5 30 28..22.05 Load Current Series 28 Series Solid State Relays Mounting Type 01 02 03 Type 1 Type 2 Type 3 Type 4 Control Voltage 2 3 4 332 80250 VAC 530 02 05 10 20 25 30 40 50 60 70 75 80 90 100 2A 5A 20A 25A 30A 40A 50A 60A 70A 75A 80A 90A 100A Load Voltage 2 3 4 5 24240VAC 75480VAC 12250 12400 9
Model Number Structure Relays A1 A 50 ELA B1 AC TE R 0V TA 48 ID S 4 L.3 C2 SO 3.55.2 29 B2 E 24 S HA A2 3P 29..21.90 Load Current Series 29 Series Solid State Relays Mounting Type 01 02 03 05 Type 1 Type 2 Type 3 Type 4 Type 5 Control Voltage 1 2 10 20 25 30 40 50 60 70 80 90 100 332 80250 VAC Load Voltage 1 10 20A 25A 30A 40A 50A 60A 70A 80A 90A 100A 24480VAC
Thermal Derate Curve Load Current Per Channel ( Amperes ) DERATE CURVES 29 Series IP20 25A 25 20 2 C/W 1.5 C/W 1 C/W 0.7 C/W 0.5 C/W 15 10 5 0 20 30 40 50 60 70 80 Ambient Temperature ( C ) DERATE CURVES 29 Series IP20 60A Load Current Per Channel ( Amperes ) 60 40 2 C/W 1.5 C/W 1 C/W 0.7 C/W 0.5 C/W 30 20 10 0 20 30 40 50 60 70 80 Ambient Temperature ( C ) 11
Onetouch Mounting Plate The Onetouch Mounting Plate is used to mount the SSR to a DIN Track. To mount the Relay to DIN Track, first mount it to the Onetouch Mounting Plate and then attach it to the DIN Track as shown in the diagram. Two, M4 mounting holes for the 28. To remove the Relay from the DIN Track, pull down on the tab with a screwdriver in the direction of the arrow. Two, M4 mounting holes for the 28. 30 44 When a Relay is mounted to DIN Track, use it within the rating for a Relay without a heat sink. 12
Terms And Conditions Please read this catalog before purchasing any products. Please consult your WERNER representative for any clarifications or comments. Application Considerations Warranty WERNER's warranty represents that the products are free from defects in materials and workmanship for a period of one year. WERNER shall not be responsible for any special loss of profit, commercial loss, indirect or consequential damages relevant to products. WERNER shall not be responsible for repair, warranty or any claims regarding the products unless WERNER s Analysis conform that the products were properly stored, installed, handled, maintained and not a the results from accident, insufficient, abuse, misuse, natural disaster, improper installation excessive electrical supply, environmental conditions or abnormal mechanical. Disclaimers WERNER shall practice to change type/model numbers when published ratings or features are changed, however some specifications of the products may be changed without any notice. When in doubt, please consult with your WERNER representative to confirm actual specifications of products. WERNER shall change product specifications and accessories at any time based on improvements and other reasons. The information in this catalog has been carefully checked. However, WERNER take no responsibilities for clerical, typographical or proofreading errors. Product specifications are subject to change without notice. Electric Thank you for choosing WERNER products. Copyright WERNER Electric. All Right Reserved.
Werner Elektrik GmbH Dorotheastraße, 2, 27568 Bremerhaven, Germany T: +49 711 6740 0552