Industrial Pressure Transmitter Pressure Ports With Flush Welded Stainless Steel Diaphragm accuracy according to IEC 60770: 0.5 % FSO Nominal pressure from 0... 60 bar up to 0... 400 bar Output signals The pressure transmitter is suitable for measuring the pressure of viscous and pasty media, where a totally flush pressure port is required. -wire: 4... 0 ma -wire: 0 0 ma / 0 0 V Special characteristics suited for viscous and pasty media Preferred areas of use are Optional versions IS-version Ex ia = intrinsically safe for gases and dusts SIL according to IEC 6508 / IEC 65 food compatible filling fluid with FDA approval cooling element for media temperatures up to 00 C specific versions Plant and Machine Engineering Food Industry Preferred used for Viscous and Pasty Media
Input pressure range Nominal pressure gauge/abs. [bar] 60 00 60 50 400 Overpressure [bar] 00 00 400 400 600 Burst pressure [bar] 80 00 500 750 000 Output signal / Supply Standard -wire: 4... 0 ma / V S = 8... V DC SIL-version: V S = 4 8 V DC Option IS-protection -wire: 4... 0 ma / V S = 0... 8 V DC SIL-version: V S = 4 8 V DC Options -wire -wire: 0... 0 ma / V S = 4... 0 V DC 0... 0 V / V S = 4... 0 V DC Performance Accuracy ± 0.5 % FSO Permissible load current -wire: R max = [(V S V S min) / 0.0 A] Ω current -wire: R max = 500 Ω voltage -wire: R min = 0 kω Influence effects supply: 0.05 % FSO / 0 V load: 0.05 % FSO / kω Long term stability ± 0. % FSO / year at reference conditions Response time -wire: 0 msec -wire: msec accuracy according to IEC 60770 limit point adjustment (non-linearity, hysteresis, repeatability) Thermal effects (Offset and Span) / Permissible temperatures Thermal error ± 0. % FSO / 0 K in compensated range -0... 85 C Permissible temperatures medium: -40... 5 C for filling fluid silicone oil -0... 5 C for filling fluid food compatible oil electronics / environment: -40... 85 C storage: -40... 00 C Permissible temperature medium filling fluid silicone oil overpressure: -40 00 C vacuum: -40... 50 C for cooling element 00 C filling fluid food compatible oil overpressure: -0... 50 C vacuum: -0... 50 C an optional cooling element can influence thermal effects for offset and span depending on installation position and filling conditions. max. temperature of the medium for overpressure > 0 bar: 50 C for 60 minutes with a max. environmental temperature of 50 C Electrical protection Short-circuit protection permanent Reverse polarity protection no damage, but also no function Electromagnetic compatibility emission and immunity according to EN 66 Mechanical stability Vibration 0 g RMS (5 000 Hz) according to DIN EN 60068--6 Shock 500 g / msec according to DIN EN 60068--7 Filling fluids Standard silicone oil Options food compatible oil (with FDA approval) (Mobil SHC Cibus ; Category Code: H; NSF Registration No.: 4500) Materials Pressure port stainless steel.445 (6 L) Housing stainless steel.4404 (6 L) Option compact field housing stainless steel.405 (0) with cable gland brass, nickel plated Seals (media wetted) : FKM (recommended for medium temperatures 00 C) option: FFKM 4 (recommended for medium temperatures > 00 C) Diaphragm stainless steel.445 (6 L) Media wetted parts pressure port, seals, diaphragm 4 for pressure ranges PN 00 bar Explosion protection (only for 4 0 ma / -wire) Approvals IBExU 0 ATEX 068 X / IECEx IBE.007X DX9- zone 0: II G Ex ia IIC T4 Ga zone 0: II D Ex ia IIIC T 85 C Da Safety technical maximum values U i = 8 V, I i = 9 ma, P i = 660 mw, C i 0 nf, L i 0 µh, the supply connections have an inner capacity of max. 7 nf to the housing Permissible temperatures for in zone 0: -0... 60 C with p atm 0.8 bar up to. bar environment in zone or higher: -0... 70 C Connecting cables cable capacitance: signal line/shield also signal line/signal line: 60 pf/m (by factory) cable inductance: signal line/shield also signal line/signal line: µh/m
Miscellaneous Option SIL 5 according to IEC 6508 / IEC 65 Current consumption signal output current: max. 5 ma signal output voltage: max. 7 ma Weight min. 00 g (depending on process connection) Installation position any ( calibration in a vertical position with the pressure port connection down) Operational life > 00 x 0 6 pressure cycles CE-conformity EMC Directive: 04/0/EU Pressure Equipment Directive: 04/68/EU (module A) 6 ATEX Directive 04/4/EU 5 only for 4 0 ma / -wire 6 This directive is only valid for devices with maximum permissible overpressure > 00 bar Wiring diagrams -wire-system (current) p supply + -wire-system (current / voltage) p supply + VS VS supply I supply I / U signal + A / V Pin configuration Electrical connection ISO 4400 Binder 7 Mx / metal cable colour field housing (5-pin) (4-pin) (IEC 60757) Supply + Supply Signal + (only for -wire) 4 IN + IN OUT + wh (white) bn (brown) gn (green) Shield ground pin 5 4 gnye (green-yellow) Electrical connection (dimensions in mm) option ISO 4400 Binder Series 7 5-pin Mx 4-pin (IP 65) (IP 67) (IP 67) compact field housing cable outlet with PVC cable (IP 67) (IP 67) 7 universal field housing stainless steel.4404 (6 L) with cable gland M0x.5 (ordering code 880) and other versions on request 7 : m PVC cable without ventilation tube (permissible temperature: -5... 70 C)
Mechanical connection (dimensions in mm) G/" flush DIN 85 option G/4 flush DIN 85 G flush DIN 85 cooling element 00 C 8 G/ flush with radial o-ring SIL- and SIL-Ex version: total length increases by 6.5 mm! metric threads and other versions on request 8 possible for nominal pressure ranges PN 60 bar
Ordering code - - - - - - - - - Pressure gauge absolute 5 0 5 5 0 6 Input [bar] 60 6 0 0 00 0 0 60 6 0 50 5 0 400 4 0 0 9 9 9 Output 4 0 ma / -wire 0 0 ma / -wire 0 0 V / -wire Intrinsic safety 4 0 ma / -wire SIL 4 0 ma / -wire SIL with Intrinsic safety 4 0 ma / -wire E S ES Accuracy 0.5 % 5 Electrical connection Male and female plug ISO 4400 Male plug Binder series 7 (5-pin) Cable outlet with PVC-cable Male plug Mx (4-pin) / metal 0 0 0 0 T A 0 M 0 compact field housing stainless steel.405 8 5 0 9 9 Mechanical connection G/" DIN 85 with Z 0 0 G/4" DIN 85 with Z 0 G" DIN 85 with Z G /" DIN 85 with rad. o-ring and Z 6 9 9 Diaphragm Stainless steel.445 (6L) Seals FKM FFKM 7 Filling Fluids Silicone oil food compatible oil Special version with cooling element up to 00 C 0 0 0 0 0 9 9 : m PVC cable without ventilation tube (permissible temperature: -5 70 C) only for P N 00 bar possible only for P N 60 bar possible 0.0.0